From identifying hazards to providing education and training, 3M can help you get your job done and get you and your workers back home safely at the end of each day. In this podcast series we discuss health and safety challenges to assist in controlling workplace hazards and risks through the Scienc…
Part two in our series on exposure assessment awareness. In this episode, 3M's Katie Hacker and co-hosts Mark Reggers and Laurie Wells continue their discussion on workplace exposure assessment awareness. Listen in as they go deeper into exposure standards, monitoring, and other considerations and best practices for conducting exposure assessments. Katie Hacker is a Certified Occupational Hygienist (CIH) and Global Application Engineering Manager in 3M's Personal Safety Division. The Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
Welcome back to another episode of the Global Science of Safety podcast. In this episode co-hosts Mark Reggers and Laurie Wells, along with guest Katie Hacker discuss exposure assessment as a component of workplace hazard awareness. Having a systematic method to characterize workplace exposures to chemical, physical and biological agents is fundamental to occupational health and safety programs. This is part one of a two-part series on exposure assessment awareness. Tune in to learn more about this important aspect of workplace health and safety. Katie Hacker is a Certified Occupational Hygienist (CIH) and Global Application Engineering Manager in 3M's Personal Safety Division. The Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
In this episode, Eric Fallen joins co-hosts Mark Reggers and Laurie Wells to discuss a common challenge: how to hear important sounds in the work environment while being protected from hazardous sounds. Eric is a technical specialist with the 3M Personal Safety Division supporting protective communication hearing protectors. He holds a Doctor of Audiology degree and is a retired Lieutenant Colonel, U.S. Army. Tune in to learn more about understanding how fluctuating and intermittent noise can affect hearing protector use and about technologies that allow sound to be audible while protecting the worker from hazardous sound. The Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
In this episode, Shari Smith joins co-hosts Mark Reggers and Laurie Wellsto to discuss silica. Shari is a segment specialist in the 3M Personal Safety Division and also a Certified Industrial Hygienist (CIH) and Certified Safety Professional (CSP). Tune in to learn more about potential workplace exposure to silica including applications that may generate respirable crystalline silica, potential health effects, and examples of controls. The Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
Today on the podcast co-hosts Mark Reggers and Laurie Wells continue their discussion on workplace hazard awareness with guest Lucre Pfefferman. Lucre is a Certified Occupational Hygienist working for 3M New Zealand in the Personal Safety Division. In this episode, the team discusses the concept of hazard recognition, which is another important element of occupational health and safety awareness. The Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
Welcome back to another episode of the Global Science of Safety podcast. In this episode, 3M's Lucre Pfeffermanand co-hosts Mark Reggers and Laurie Wells discuss workplace hazard awareness with a focus on anticipating hazards. Tune in to learn more about this important aspect of workplace health and safety. Lucre Pfeffermanis a Certified Occupational Hygienist working for 3M New Zealand in the Personal Safety Division. The Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
In this episode of the Global Science of Safety Podcast, join co-hosts Mark Reggers and Laurie Wells as they discuss full body harnesses with 3M's David Baker. David is the 3M Personal Safety Division EMEA Fall Protection Application Engineering Leader based in the United Kingdom. Full-body harnesses are used in many segments including construction, oil and gas, utilities, and heavy manufacturing and transportation. The purpose of a full-body harness is to help arrest a fall from heights, distribute the impact forces around the body, and help ensure the body remains in an upright plane. Tune in to learn more about the selection and fit of this important piece of personal protective equipment. The Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
Welcome back to the Science of Safety Podcast. Today on the podcast, co-hosts Mark Reggers and Laurie Wells welcome Don Rust, a Certified Industrial Hygienist, and Certified Safety Professional in 3M's Personal Safety Division. In this episode, they discuss head protection including types of hard hats, selection considerations, donning tips, care and maintenance, and much more. Hard hats are an important piece of personal protection equipment for construction, heavy manufacturing, mining, oil and gas, utilities, and many other industries where there is a potential for head injuries from falling objects, flying/swinging objects, nearby overhead hazards, and other worksite-specific hazards. The Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
In this episode of the Science of Safety Podcast, co-hosts Mark Reggers and Laurie Wells, along with special guest Katie Aune, a Specialist Application Engineer, and Certified Safety Professional in 3M's Personal Safety Division, discuss eye hazards in the workplace. Eye hazards can be found in nearly every industry from construction, heavy manufacturing, mining, and oil and gas to chemical, pharmaceutical, and utilities. Tune in to learn more about protecting workers' eyesight on the job including common hazards, types and styles of eye and face protection, and selection considerations including fit, comfort, and compatibility. The Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
In this episode, co-hosts Mark Reggers and Laurie Wells reflect back on some of the highlights from this first global season of the podcast. From selection fundamentals for respiratory protection, hearing protection, and fall protection to the science of fit. This season of the podcast has been full of guests from around the world. best practices, and more. Listen in as Mark and Laurie drop some hints on the new lineup of topics for next season. The first global season of the Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
Welcome back to the Science of Safety Podcast. Today in the podcast co-hosts Mark Reggers and Laurie Wells along with their guest, 3M's Skye Liu, discuss the importance of fit for hearing protection. Fit and noise reduction are related and are key aspects of hearing protector selection and use. Tune in to learn more about fit for earplugs and earmuffs, fit-testing methods, factors that can affect fit, best practices, and much more. The first global season of the Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on PPE used to help keep workers healthy and safe.
Welcome back to the Science of Safety Podcast. In this episode, co-hosts Mark Reggers and Laurie Wells along with their guest, 3M's Jessica Tredinnick, discuss the importance of fit for tight-fitting respirators. Tune in to learn more about fit, fit testing, factors that can affect fit such as facial hair, best practices, and much more. The first global season of the Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
Welcome back to the Science of Safety Podcast. In part two of our series on fall protection selection co-hosts Mark Reggers and Laurie Wells welcome Heidi Lopez-Hidalgo, a global Senior Application Engineer in 3M's Personal Safety Division. In this episode, they continue the discussion on the ABCs of fall protection with a focus on the DEFs (descent and rescue, education, and fall protection for tools). Tune in to learn more about keeping workers safe while working at heights. The first global season of the Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
In this episode of the Science of Safety Podcast, co-hosts Mark Reggers and Laurie Wells, along with special guest Greg Peterson, a Specialist Application Engineer with 3M Australia, discuss working at heights and selection of fall protection equipment. Tune in to learn more about the hierarchy of controls, and the ABCs (anchorage, body support, connectors) of fall protection. This is the first episode of a two-part series on fall protection selection. The first global season of the Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
In part two of our series on hearing protection selection, co-hosts Mark Reggers and Laurie Wells welcome Bev Borst, Occupational Hearing Nurse and Senior Safety and Health Specialist with 3M Canada. This discussion focuses on essential hearing protector selection criteria, such as attenuation, audibility, comfort, fit, environmental conditions, and personal protective equipment (PPE) compatibility. Tune in to hear about what you can do for your hearing by choosing appropriate hearing protectors. The first global season of the Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
In this episode of the Science of Safety Podcast, co-hosts Mark Reggers and Laurie Wells, along with guest Mohammed Saleem, a Certified Industrial Hygienist and Senior Technical Specialist – Europe, with 3M's Personal Safety Division, explore some fundamentals related to hearing protection selection. This is part one of a two-part series on selection considerations. Tune in to learn more about hazardous noise, evaluating noise exposure, occupational exposure limits, types of hearing protection, and the listener challenge: what does your hearing do for you? The first global season of the Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
Part two in our series on respiratory protection selection. In this episode, co-hosts Mark Reggers and Laurie Wells along with 3M's Dr. Nicole Vars McCullough resume their discussion and dive deeper into the different types and styles of respirators and concepts such as fit, comfort, and personal protective equipment (PPE) compatibility. The first global season of the Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
In this episode of the Science of Safety Podcast, co-hosts Mark Reggers and Laurie Wells along with guest Dr. Nicole Vars McCullough, Vice President of Application Engineering and Regulatory in 3M's Personal Safety Division, discuss some fundamental concepts for respiratory protection selection. This is part one of a two-part series on selection. Tune in to learn more about airborne contaminants, considerations for evaluating exposure, occupational exposure limits, types of respiratory protection, and much more. The first global season of the Science of Safety Podcast is presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe.
Welcome to the first global season of the Science of Safety Podcast presented by the 3M Personal Safety Division. This is a podcast that is curious about the science and systems behind workplace health and safety with a focus on personal protective equipment (or PPE) used to help keep workers healthy and safe. We are excited to announce that the Science of Safety podcast is now being expanded to be globally focused going forwards and more applicable to workplaces all over the world, not just in Australia. In this episode, co-hosts Mark Reggers and Laurie Wells introduce themselves and give a preview of this first global season of the podcast. Upcoming topics this season include selection considerations for respiratory protection, hearing protection, and fall protection and the importance of fit for respirators and hearing protectors.
Digital technology is creeping in more and more to the workplace safety space. The advent of digital photography has led to the development of combined visual and heat sensing cameras. These are able to detect and differentiate variations in temperature in a workplace environment, which then enables those responsible to make better decisions around worker safety where temperature changes are volatile and unpredictable. In this episode, 3M specialist, Kevin McComb discusses with host Mark Reggers, the latest technologies used for Thermal Imaging, the features of cameras and their associated systems, and the kinds of specific use cases where Thermal Imaging becomes standard practice to increase worker safety.
In this episode, part two from Episode #100, host Mark Reggers and PPE specialist Maurice Gould dive deeper into the various technical specifications that differentiate coveralls from one another, and how these differences inform our choices when selecting the most suitable coverall for the intended workplace application. Coveralls vary in all kinds of ways, from the type of material, the methods of layering different materials to improve protection, breathability and wearer comfort, seam and tear strength and in the overall quality, adherence to standards and compliance. We must ensure that those responsible for protecting workers with PPE such as coveralls, are doing the right thing, knowing the garments are fit for purpose, understanding all the factors involved and making fully informed choices to protect workers and keep workplaces safe.
Part one of our two-part series focusing on Protective Coveralls, 3M PPE Specialist Maurice Gould takes host Mark Reggers through the considerations employees and workers must be familiar with when it comes suitable and appropriate PPE Coverall protection. Besides the obvious role of coveralls in keeping workers and their clothes clean, coveralls' main role is usually to avoid workers' skin being impacted by unwanted chemicals and dust. The skin is a route of entry for many harmful substances to impact the body, and when all other controls have been exhausted or are simply not possible, the last line of defence in the hierarchy of controls could be a PPE coverall. We must be sure coveralls are fit for purpose, with the right level of protection provided, robust enough to resist things like scrapes and tears and fit suitably to avoid loose-fitting garments increasing danger by potentially getting caught in machinery. If your workplace uses coveralls, or you are considering undertaking work that might require coverall protection, these two episodes will ‘cover all' you need to know to make sure you make the right choices when selecting and using PPE coveralls.
When you need to work in environments where breathing the air could prove to be hazardous - even fatal - and filtering that air simply won't guarantee you safe supply, you might have to carry your own air with you. SCBA (Self-Contained breathing Apparatus) allows you to create a portable, safe, clean air solution, and can provide. If fitted properly, maintained and used with the right training and preparation a SCBA rig can allow workers to get the job done in otherwise impossible environments. In this episode, 3M specialist, Kevin McComb covers all the aspects you need to be aware of and consider when it comes to SCBA; when you may need to choose this solution, how it compares with other air-purifying or clean air supplied options, what components make up an SCBA, appropriate training, use, care and maintenance or this vital piece of PPE.
How prepared are you if a major disaster or emergency happens at work? Are your responses detailed and practiced? What if the emergency impacts more than just your business or place of work? Do you have the right strategies in place to ensure your communication and response is in line with the management systems of local, state and national emergency response organisations? In this episode, host Mark Reggers and Risk Management Professional, Andrew Stanbury discuss the finer details of emergency management, including the Australasian Inter-service Incident Management System (AIIMS), overarching principles that guide emergency management, flexibility, roles and the many aspects to preparing and responding to disasters and emergencies large and small.
In this episode, host Mark Reggers and 3M's Terry Gorman, Occupational Hygienist and respiratory protection specialist in PPE, are discussing all about Supplied Airline Systems. Usually, respiratory protection takes the form of filtering or air purifying products, that take the air being breathed in from the environment and filter out the unwanted impurities, such as particles or vapours. Supplied Airline Systems are required when the air is either too toxic to filter or presents a risk of unknown substances being present in a contaminated are that are unable to be filtered from getting into the worker's lungs. Terry covers the application and use of Supplied Airline Systems, the various components of a system, cleaning, servicing and maintenance programs and some more detailed specifications around air pressure, air-conditioning, multiple worker systems and training to ensure correct use and reliable service or Supplied Airline Systems.
In this episode, host Mark Reggers and guest Jane Whitelaw, Certified Occupational Hygienist and RESP-FIT Board Member (more detailed bio below) discuss the RESP-FIT program, which has been developed in response to a need to improve the respirator fit-testing standards and practices in Australia. The Australian Institute of Occupational Hygienists (AIOH) developed the program and provides employers and PCBUs the means for improving the quality of fit-testing in the workplace. RESP-FIT provides a standardised training syllabus and accreditation to ensure a framework of competency can be made available to all Australian workers. The syllabus and training are based on the Australian and New Zealand standard 1715, and also based on ISO 16975-3. Mark and Jane cover the processes, standards and rigours developed through the creation of the RESP-FIT program and how you can get involved, either as an accredited fit-tester, a training provider, or by finding and engaging accredited fit-testers through the RESP-FIT website.
In this episode, host Mark Reggers and guest Professor David Crouch, 3M’s Global Subject Matter Expert – Application Engineering (Defence & Public Safety) continue where they left off and resume their discussion on respiratory protection related to chemical, biological, radiological and nuclear hazards. CBRN is an acronym for Chemical, Biological, Radiological and Nuclear. It is a terminology used worldwide that refers to malicious incidents or weapons in which any of the four types of hazards mentioned are used to cause significant harm or disruption. It encompasses the protective measures taken in these situations and consists of passive protection, contamination avoidance and mitigation.
In this episode, Professor David Crouch, 3M’s Global Subject Matter Expert – Application Engineering (Defence & Public Safety) joins host Mark Reggers for the first of a two-part series to discuss respiratory protection as it relates to chemical, biological, radiological and nuclear hazards. CBRN is an acronym for Chemical, Biological, Radiological and Nuclear. It is a terminology used worldwide that refers to malicious incidents or weapons in which any of the four types of hazards mentioned are used to cause significant harm or disruption. It encompasses the protective measures taken in these situations and consists of passive protection, contamination avoidance and mitigation.
In this episode, host Mark Reggers and guest Adrian Sims, Managing Director at Vent-Tech Ltd continue where they left off and resume their discussion on the subject matter of local exhaust ventilation. Local exhaust ventilation (LEV) is an engineering control designed to reduce or eliminate worker exposure to dust, fumes or other hazardous airborne substances that are created by numerous processes in the workplace. An LEV system captures the emissions at the source, removing them from the work area before inhalation to protect worker health.
In this episode Adrian Sims, Managing Director at Vent-Tech Ltd joins host Mark Reggers for the first of a two-part series to discuss local exhaust ventilation. Local exhaust ventilation (LEV) is an engineering control designed to reduce or eliminate worker exposure to dust, fumes or other hazardous airborne substances that are created by numerous processes in the workplace. An LEV system captures the emissions at the source, removing them from the work area before inhalation to protect worker health.
In this episode, Sarah-Jane Dunford, Director and Principal Consultant from Riskology and One Touch Contracting joins host Mark Reggers to discuss managing contractors. Contractor management refers to a method of controls to effectively manage outsourced work conducted for an individual company to prevent and or minimise potential health and safety risks. It addresses the challenges associated with the selection, acquisition, use, and monitoring of these contracted employees and their work.
In this episode, host Mark Reggers and guest Mike Clayton, 3M’s Senior Respiratory Protection Research & Application Specialist for the Personal Safety Division in the United Kingdom continue where they left off and resume their discussion on the subject matter of conducting a respirator fit test. Tight-fitting respirators must seal to the wearer’s face to provide the expected protection. A respiratory fit test ensures that the respirator truly fits and is being worn correctly. Respiratory fit testing applies to all tight-fitting respirators, either full face masks that cover the mouth, nose and eyes and half masks which covers the mouth and nose.
In this episode, Mike Clayton, 3M’s Senior Respiratory Protection Research & Application Specialist for the Personal Safety Division in the United Kingdom joins host Mark Reggers for the first of a two-part series to discuss conducting a respirator fit test. Tight-fitting respirators must seal to the wearer’s face to provide the expected protection. A respiratory fit test ensures that the respirator truly fits and is being worn correctly. Respiratory fit testing applies to all tight-fitting respirators, either full face masks that cover the mouth, nose and eyes and half masks which covers the mouth and nose.
In this episode, Kerry Cheung, Certified Occupational Hygienist and Technical Specialist at WorkSafe New Zealand joins host Mark Reggers to discuss their work-related health strategy. Work-related health acknowledges the interaction between a person’s work and their health, focussing on the way work could impact worker health and the way their health might influence safe work practices. WorkSafe NZ’s work-related health strategy aims to have fewer people experience work-related ill-health to achieve their vision of: Everyone who goes to work comes home healthy and safe.
In this episode, Zach Lawler, Quality and Application Engineer for 3M’s Fall Protection Business in the Personal Safety Division joins host Mark Reggers to discuss fall protection connectors. When it comes to fall protection, connectors are devices that attach the full-body harness to the anchorage system. They are an essential element of any fall protection system used when working at height. They can be single products such as shock absorbing lanyards or self retracting lifelines, or multiple devices working together.
In this episode, Sarah-Jane Dunford, Director and Principal Consultant from Riskology and One Touch Contracting joins host Mark Reggers to discuss safety management systems. Safety management systems provide a systematic business-like approach to managing safety elements in the workplace. They are used to continuously identify and monitor hazards, control risks and to help in the prevention of accidents and injuries. They typically include organisational structures, accountabilities, objectives, plans, policies and procedures.
In this episode Robert Blackley, Senior Health Physicist and Radiation Services Manager at ANSTO returns to discuss non-ionising radiation with host Mark Reggers. As opposed to ionising radiation, non-ionising radiation is a source of relatively low-energy radiation that does not have enough power to ionise atoms or molecules and unable to change the composition of a substance. Non-ionising radiation is found in a wide range of occupational environments, although considered less dangerous, overexposure can pose considerable health risks to potentially exposed workers if not suitably controlled.
In this episode Mike Clayton, 3M’s Senior Respiratory Protection Research & Application Specialist for the Personal Safety Division in the United Kingdom joins host Mark Reggers to discuss respiratory protection equipment factors. Respiratory protective equipment factors are numbers that reflect how much protection a respirator is capable of offering the wearer, for the level of air contaminants in their environment. Knowing the protection factor is essential as it aids in selecting the appropriate level of respiratory protection needed. However, there are numerous protection factors which can cause confusion when choosing a respirator for use in the workplace.
In this episode Zach Lawler, Quality and Application Engineer for 3M’s Fall Protection Business in the Personal Safety Division joins host Mark Reggers to discuss fall protection body harnesses. A full-body harness is a critical component of a fall protection system used when working at height. In the event of a fall, the harness retains the wearer keeping them connected to the anchorage it is attached to while distributing the forces generated in the fall to areas of the body that are more capable of withstanding them.
In this episode Tejaswi Shetty, Microbiologist and Senior Property Risk Consultant at Greencap joins host Mark Reggers to discuss cooling towers and the hazards they can present. A cooling tower is a heat rejection device used to lower the temperature of the water contained within it through evaporative cooling. It expels waste heat to the environment outside the building allowing the cold air to move into the internal parts of the building and cool the structure. Sometimes the dispelled air may be contaminated with Legionella bacteria, that if inhaled by susceptible people, may develop into legionnaires’ disease.
In this episode Robert Blackley, Senior Health Physicist and Radiation Services Manager at ANSTO joins host Mark Reggers to discuss ionising radiation. Ionising radiation is the energy produced from natural or artificial sources in the form of waves or particles. It has enough power to change the composition of substances it interacts with by breaking their chemical bonds. Although radiation has many useful applications in industry and medicine, over-exposure can be detrimental.
In this episode Carmen Naylor, Certified Occupational Hygienist supporting High Reliability at ANSTO as the Occupational Hygiene Leader joins host Mark Reggers to discuss the Australian Nuclear Science and Technology Organisation (ANSTO), who they are and what they do. ANSTO is one of Australia’s largest public research organisations and provides the Australian and international community with products and services to improve human health, support industry and protect the environment. ANSTO works across these areas to find solutions to some of the biggest questions in science for the benefit of all Australians.
In this episode, Terry Gorman, 3M’s Lead Application Engineer for the Personal Safety Division in Australia and New Zealand joins host Mark Reggers to discuss surgical masks and respirators, and the difference between them. Surgical masks and respirators may look similar, with the names often used interchangeably. However, when it comes to respiratory protection, they are quite different. They each perform different roles that offer varying levels of protection in a diverse range of applications, and it’s important to understand when and where they are used.
In this episode, host Mark Reggers and guest Carolyn Topping, Acting Director of the Occupational Health and Hygiene Unit within Workplace Health and Safety Queensland continue where they left off and resume their discussion on the subject matter of engineered stone and silica. In recent years there has been much discussion surrounding engineered stone benchtops causing a resurgence in silicosis, a fatal and life-debilitating lung disease, amongst workers in the benchtop manufacturing, finishing and installation industries. Silica, one of the most common minerals on the planet found in both engineered and natural stone is an occupational hazard for those working with stone countertops due to their exposure to large volumes of toxic airborne silica.
In this episode, Carolyn Topping, Acting Director of the Occupational Health and Hygiene Unit within Workplace Health and Safety Queensland joins host Mark Reggers for the first of a two-part series to discuss engineered stone and silica. In recent years there has been much discussion surrounding engineered stone benchtops causing a resurgence in silicosis, a fatal and life-debilitating lung disease, amongst workers in the benchtop manufacturing, finishing and installation industries. Silica, one of the most common minerals on the planet found in both engineered and natural stone is an occupational hazard for those working with stone countertops due to their exposure to large volumes of toxic airborne silica.
In this episode, host Mark Reggers and guest David Hauser, Team Manager in Property Risk at Greencap resume where they left off and continue their discussion on the subject matter of Property Risk. Property risk relates to a broader area than just the land and buildings in question. It covers risks associated with the asset, the infrastructure and people. It looks at how a property is managed to minimise hazard exposure to individuals, whether they be occupants or visitors, and how the efficiency and effectiveness of the property can be improved.
In this episode, David Hauser, Team Manager in Property Risk at Greencap joins host Mark Reggers for the first of a two-part series to discuss Property Risk. Property risk relates to a broader area than just the land and buildings in question. It covers risks associated with the asset, the infrastructure and people. It looks at how a property is managed to minimise hazard exposure to individuals, whether they be occupants or visitors, and how the efficiency and effectiveness of the property can be improved.
In this episode host Mark Reggers and guest Jackii Shepherd, Safe Work Australia’s Director of Occupational Hygiene Policy and Team Manager for their Workplace Exposure Standards Review continue where they left off and resume their discussion on the exposure standards review process. Under the model work health and safety laws, a workplace exposure standard is an airborne concentration of a chemical that a worker cannot be exposed above in the workplace to protect them from harm. However, because science and technology are always evolving, so too does our understanding of chemicals, the way we use them and their impacts on health; as a result, a review process is essential.
In this episode, the first of a two-part series, guest Jackii Shepherd, Safe Work Australia’s Director of Occupational Hygiene Policy and Team Manager for their Workplace Exposure Standards Review joins host Mark Reggers to discuss the exposure standards review process. Under the model work health and safety laws, a workplace exposure standard is an airborne concentration of a chemical that a worker cannot be exposed above in the workplace to protect them from harm. However, because science and technology are always evolving, so too does our understanding of chemicals, the way we use them and their impacts on health; as a result, a review process is essential.
In this episode host Mark Reggers and guest Terry Gorman, 3M’s Lead Application Engineer for the Personal Safety Division in Australia and New Zealand continue where they left off and resume their discussion on the subject matter of bushfires and respiratory protection. Bushfire smoke generates a gigantic volatile cocktail of hydrocarbons of various sizes, shapes and toxicity. Measuring the degree of respiratory hazard exposure from bushfire smoke is never easy as there are many factors at play during the blaze. Respiratory protection in these unpredictable conditions is critical, which, when used correctly and paired to the circumstances, can significantly reduce your exposure.
In this episode, Terry Gorman, 3M’s Lead Application Engineer for the Personal Safety Division in Australia and New Zealand joins host Mark Reggers for the first of a two-part series to discuss bushfires and respiratory protection. Bushfire smoke generates a gigantic volatile cocktail of hydrocarbons of various sizes, shapes and toxicity. Measuring the degree of respiratory hazard exposure from bushfire smoke is never easy as there are many factors at play during the blaze. Respiratory protection in these unpredictable conditions is critical, which, when used correctly and paired to the circumstances, can significantly reduce your exposure.