Manufacturing News Network

Grant Gibson, Co-Founder and Chief Development Officer of Synthica Energy shares his insights with MNN host Jason Moss on how industrial byproducts or organic waste streams can be converted into RNG (Renewable Natural Gas).GMA Member Spotlight - Synthica EnergyTopics will include:New Georgia FacilityWho can benefit from RNGPositive impacts on the manufacturing industry and environment Grant Gibson About Synthica EnergySynthica Energy is an anaerobic digestion development company bringing organics-to-energy facilities to underserved markets across the U.S. The company's mission is to facilitate the diversion of pre-consumer organic waste away from landfills, abate the associated methane emissions, and convert the organic material into renewable natural gas (RNG). In doing so, Synthica aims to provide industrial manufacturers with a greener outlet for their organic waste and North American utilities with reliable access to RNG. The company focuses on “urban-friendly digestion,” incorporating multiple layers of odor control technology to minimize local impact. As a result, Synthica expects its facilities to seamlessly coexist in communities producing high amounts of organic waste. To learn more, visit www.synthica.com. Who should attend:Competitive Manufacturing Leaders who want to understand how they can reduce waste cost and help the environment  If you have any specific questions you would like covered during this session, email them to support@georgiamanufacturing.com Manufacturing News Network (MNN) is where industry leaders share manufacturing and business best practices. Enjoy being part of the most well-connected community of manufacturing industry leaders in the country - www.JoinGMATODAY.com The Manufacturing News Network is a podcast hosted by Jason Moss, CEO of the Georgia Manufacturing Alliance. To learn more about the podcast program visit http://www.manufacturingnewsnetwork.com

Beau Groover and Max Thomas of SwifTemp share their insights on industry trends impacting Georgia manufacturing companies. Labor and LeadershipGMA Support Partner Spotlight - Manufacturing News Network We discussed information that helps manufacturing leaders understand the impact that compressed air has on your bottom line.Topics  include:Understand labor challenges during challenging timesLeadership developmentTools and Tips that work About SwifTemp: Swiftemp's mission is to positively impact the lives of manufacturing people. We do this by providing operational support to manufacturers. We understand the unique staffing and operational challenges in the MFG industry because we have been right where you are. And we are committed to delivering customized solutions that address those challenges head-on. We believe in being responsive, reliable, and results-driven, and we strive to form long-term partnerships with our clients based on trust, integrity, and mutual success. Who should attend:Competitive Manufacturing Leaders who want to increase profitability, lower operating costs, and prepare for the future. Frustrated MFG leaders who know that there is a better, more cost-effective way but haven't been able to find it.  Learn more at https://swiftemp.com/ Email max@swiftemp.com.com  If you have any specific questions you would like covered during this session, email them to support@georgiamanufacturing.com

WHO WHAT WHEN WHERE - 2023 Greener Manufacturing Show Details from GMA Industry leaders share sustainability, manufacturing, and business best practices.  To learn more about the event and register, visit https://www.georgiamanufacturingallia...  Enjoy being part of the most well-connected community of manufacturing industry leaders in the country - www.JoinGMATODAY.com  The Manufacturing News Network is a podcast hosted by Jason Moss, CEO of the Georgia Manufacturing Alliance. To learn more about the podcast program visit http://www.manufacturingnewsnetwork.com

Eric Lunsford, President of Pye-Barker Engineered Solutions shares his insights on industry trends impacting Georgia manufacturing companies. Ron Wright discusses details on how many manufacturing companies are wasting tons on cash (and profit) on electrical cost due to poorly engineered compressed air systems and simple air leaks.SIZE MATTERSGMA Support Partner Spotlight - Manufacturing News Network We discussed information that helps manufacturing leaders understand the impact that compressed air has on your bottom line.Topics will include:Understand proper sizing of compressorsFinding and correcting wasteEnergy cost reduction Eric Lunsford, President of Pye-Barker Engineering will share information about how to reduce your energy cost through a simple three-step process. Ron Wright, Territory Account Manager Pye-Barker Engineered SolutionsA 20-year veteran in food manufacturing with roles in maintenance management, plant engineering and operations management, Ron switched sides of the table and has spent the last 7 years as a sales engineer, solving issues for customers in compressed air, vacuum, pressure blowers, and pumps. His background in maintenance and engineering allows him to better understand his customer's daily plant maintenance needs as well as their strategic initiatives for cost savings and capital investments. About Pye- Barker: Pye-Barker specializes in creating engineered solutions to help industrial companies in Georgia with their compressed air, pumping and blower/vacuum systems. We will specify a solution based on your needs and requirements. Pye-Barker has a team of highly-trained engineers who will do a deep dive into the problem and find the most practical solution. Once we find the solution our team will deliver, install, and maintain all the equipment throughout its lifetime.Customer Service is one of the core values at Pye-Barker so that means speedy and honest work, and if we are not the correct industrial supply company for your immediate need(s) we will direct you to the proper company that can help you out. Who should attend:Competitive Manufacturing Leaders who want to increase profitability, lower operating costs, and prepare for the future. Frustrated MFG leaders who know that there is a better, more cost-effective way but haven't been able to find it.  Learn more at https://pyebarker.com/ Email sales@pyebarker.com  If you have any specific questions you would like covered during this session, email them to support@georgiamanufacturing.com

This episode covers what attendees can expect at the "Lessons in Leadership" training session on Oct. 11Attendees will receive a copy of Beau Groover's latest book "Building a KICK ASS Culture"Registration and more information can be found at  https://www.georgiamanufacturingalliance.com/events/leadershiplunchandlearn2022 

This episode covers what attendees can expect at the 2022 Best Practices EXPO.The EXPO will be held at the Cobb Galleria on October 4-6.Members of GMA and friends of the community receive a 50% discount on tickets by using promo code GMA50More information can be found at  https://www.georgiamanufacturingalliance.com/events/best-practices-expo-and-conference-partner-event 

Laura Madajewski shares her insights with MNN host Jason Moss on tools and tips to survive and thrive during these crazy times. GMA Support Partner SpotlightHLB Gross CollinsThis member spotlight interview is open to everyone. We will discuss information that will help manufacturing leaders navigate to a successful future beyond the COVID 19 pandemic. These unique solutions may help you survive and thrive through these challenging times.Topics will include:Understand supply chain issues impacting rising cost and customer fulfillmentTax planning / how to hold onto cash to re-investWorkforce, workforce, and workforceTrends and industry insights for 2022 Laura Madajewski, CPA, Principal and Manufacturing, Distribution & Supply Chain Practice Leader of HLB Gross Collins, P.C. will share information about what questions manufacturers should be asking to take advantage of opportunities to reinvest in operations. She'll also review top industry trends and what can we expect moving into 2022 to remain proactive shifting into the new year.About HLB Gross Collins:HLB Gross Collins, P.C. is one of Atlanta's premier CPA firms specializing in manufacturing, distribution and supply chain operations. For over 50 years we have been providing tax, audit and assurance, and advisory services to both domestic and international clients. We are industry specialists providing unique insight and expertise to the industries we serve. The businesses we serve benefit from our in-depth knowledge of the industry-specific challenges and opportunities they face. HLB Gross Collins, P.C. has served manufacturing and distribution clients for many years and has the insight and expertise needed to guide clients to financial success and stability during challenging times, as well as during prosperous times.Who should attend:Competitive Manufacturing Leaders who want to increase revenue, lower operating costs, and prepare for the future. Frustrated MFG leaders who know that there is a better, more cost-effective way but haven't been able to find it.  If you have any specific questions you would like covered during this session, email them to support@georgiamanufacturing.com Connect with Laura on LinkedIn at https://www.linkedin.com/in/laura-madajewski-cpa-mba-10233113/ Enjoy being part of the most well-connected community of manufacturing industry leaders in the country - www.JoinGMATODAY.com The Manufacturing News Network is a podcast hosted by Jason Moss, CEO of the Georgia Manufacturing Alliance. To learn more about the podcast program visit http://www.manufacturingnewsnetwork.com

GMA Support Partner SpotlightCenturion Advisory GroupThis member spotlight interview is open to everyone. We will discuss information that will help manufacturing leaders navigate to a successful future beyond the COVID 19 pandemic. These unique solutions may help you survive and thrive through these challenging times.Topics will include:Tools and Tips to Attract and Retain Top TalentSetting your eye on the "Long Game"Retirement Plan Updates and Last Minute Tax Tips Randy BrunsonThe founding shareholder of Centurion Advisory GroupRandy has invested most of his forty-year career in financial services. He spent several years on the institutional side and started a successful financial planning firm in 1991. Randy currently holds the Accredited Investment Fiduciary (AIF®) and CKA designation. He stays on top of the financial industry knowledge through continuing professional education opportunities and reading. Randy has also completed studies in qualified plan design, estate planning, and business transition planning, and enjoys sharing insights on these topics. About Centurion Advisory Group:Serving Metro Atlanta for over 35 YearsCenturion Advisory Group serves successful individuals and business owners who choose to live with purposes. We bring our perspective and processes to bear on strategies to help them build wealth, transfer assets and values across generations, give to causes meaningful to them and their families, reduce their tax bill, and allow them to invest in ways which align with their values. Who should attend:Competitive Manufacturing Leaders who want to increase revenue, lower operating costs, and prepare for the future. Frustrated MFG leaders who know that there is a better, more cost-effective way but haven't been able to find it.  If you have any specific questions you would like covered during this session, email them to support@georgiamanufacturing.com Connect with Randy  on LinkedIn at https://www.linkedin.com/in/centurionag/Learn more about the focus on stewardship at https://centurionag.com/Recommended Reading:Profit First by Mike Michalowicz  

MNN InsightsThis MNN Insights webinar is open to everyone. We will discuss current events and critical information that will help manufacturing leaders navigate to a successful future beyond the COVID 19 pandemic.The Biden administration’s goals include strengthening unions by comprehensive changes to laws and regulations, including: increasing the number of American workers subject to collective bargaining, permitting secondary boycotts and short-term strikes, mandatory mediation and arbitration of some collective bargaining disputes, and increased penalties for labor and employment law violations. A central component of the Administration’s agenda will be The Protecting the Right to Organize Act (PRO Act), which had passed the House of Representatives in February 2020, and was recently re-introduced in the House and Senate.  The PRO Act includes most of the administration’s goals.  And, with Congress controlled by Democrats, the Pro Act may very well be voted on in the House and Senate during 2021. Please enjoy this interactive panel discussion on the elements contained in the PRO Act with Raanon Gal as moderator and Joe Bryan, Michael MacHarg and Peter Spanos as panelists. Raanon Gal focuses his practice on defending employers in employment discrimination, Family and Medical Leave Act (FMLA), wage and hour, harassment and wrongful termination litigation. Mr. Gal also helps companies with risk management and instituting preventative measures to avoid liability. Joe Bryan represents employers in labor law disputes under the National Labor Relations Act, including unfair labor practice proceedings, union representation cases, strikes, arbitration hearings and litigation.  He is a certified labor arbitrator and mediator, and frequently represents employers in collective bargaining, arbitration and mediation.  Michael MacHarg has deep experience representing employers with regard to labor issues. He has successfully represented management in dozens of union organizing campaigns and has conducted more than 1000 unfair labor investigations. Additionally, Mr. MacHarg has extensive experience related to workplace safety and health issues including compliance, audits and citation defense. Peter Spanos is experienced in traditional labor law, including matters such as collective bargaining, union organizing, union elections, unfair labor practices, grievances, and strikes. He tries cases in federal and state courts, before the NLRB, the EEOC, the U.S. Department of Labor, OSHA, and state agencies, arbitrations, mediations, and appeals. He also has specialized knowledge of the intersection of antitrust law and labor law. Who should attend:EVERYONE, stay up to date with ever-changing information and events. This session is provided by:  Obviously, we can not answer every question that we face on Coronavirus, but we are committed to sharing best practice

MNN InsightsThis MNN Insight webinar covers current events and critical information to help manufacturing leaders navigate to a successful future beyond the COVID 19 pandemic.Raanon Gal focuses his practice on defending employers in employment discrimination, Family and Medical Leave Act (FMLA), wage and hour, harassment and wrongful termination litigation. Mr. Gal also helps companies with risk management and instituting preventative measures to avoid liability.He has represented clients in a variety of industries and has provided representation under Employment Practice Liability Insurance arrangements. He also has experience in representing clients concerning cases involving non-compete agreements, misappropriation of trade secrets, employment/business torts and wage and hour litigation. His practice also encompasses all areas relating to the counseling, training and representation of management clients in federal and state courts, as well as before state and local agencies..Christina Moore has experience in representation and transactions involving real estate acquisitions and dispositions, including transactions involving complex credit facility transactions. Recently, Ms. Moore’s practice has evolved to include the Paycheck Protection Program (PPP) and its various nuances. She has become a speaker and media analyst for PPP and other COVID-19 business issues.This session is provided by:Watch the full video interview online at https://www.georgiamanufacturingalliance.com/news/mfg-news-networkConnect with Russ Dunlap and the Taylor English team athttps://www.georgiamanufacturingalliance.com/members/russell-dunlap Subscribe to this podcast at https://manufacturing-news-network.simplecast.com/ Join Georgia Manufacturing Alliance - https://www.georgiamanufacturingalliance.com/joingmatoday Obviously, we can not answer every question that we face on Coronavirus, but we are committed to sharing best practices.

GMA Support Partner SpotlightGrenzebachDuring this episode, we discussed information to help manufacturing leaders navigate to a successful future beyond the COVID 19 pandemic.John Fluker, President and CEO at Grenzebach Corporation, shared information about automation solutions that many manufacturers thought were impossible. These unique solutions may help you survive and thrive through these challenging times.Topics include:Automated Guided Vehicles (AGVs)Warehouse Execution System (WES)Goods-to-Person solution optimizes warehouse operations by both speeding up processing and saving space  John Fluker has been successful in growing the US market 80% in his time of being President & CEO of Grenzebach Corporation. John is a southern boy born and raised in South Georgia, Waycross, one of the main entrances to the Okefenokee swamp. John left Georgia to attend college in Boston at MIT where he graduated with a bachelor’s degree in Mechanical Engineering. Outside of work, John is a husband, father, avid golfer, and active churchgoer and on the Deacon board.About Grenzebach:In everything we do Grenzebach believes in making production safe, reliable, and sustainable. We achieve this goal by providing cutting edge automation solutions that stand at the forefront of several international markets. We go beyond the traditional support of most automation providers with extensive contract manufacturing services. With 30+ years of machine building experience, Grenzebach has the resources to provide design consulting, precision sheet metal work, welding, machining, and electrical/mechanical assembly. Whether you need a single custom part or a full production line we have manufacturing ability to match your needs. Who should listen:Competitive Manufacturing Leaders who want to learn about the latest in automation.Frustrated MFG leaders who know that there is a better way but haven’t been able to find it.  Connect with John  on LinkedIn at https://www.linkedin.com/in/john-fluker-6a780a/Recommended Reading:Deep Work (Rules for Focused Success in a Distracted World)Smarter Faster Better: The Transformative Power of Real ProductivityRocket Fuel   

Laura Madajewski and Jason Moss discuss information that will help manufacturing leaders navigate to a successful future beyond the COVID 19 pandemic. These unique solutions may help you survive and thrive through these challenging times.Topics include:Understand tax incentives applicable to manufacturers and when the right timing is to take advantagePPP and what is next for manufacturersTrends and industry insights for 2021 Laura Madajewski,CPA, Principal and Manufacturing, Distribution & Supply Chain Practice Leader of HLB Gross Collins, P.C. shares information about what questions manufacturers should be asking to take advantage of opportunities to reinvest in operations. Laura also review top industry trends and what can we expect moving into 2021 to remain proactive shifting into the new year.About HLB Gross Collins:HLB Gross Collins, P.C. is one of Atlanta’s premier CPA firms specializing in manufacturing, distribution and supply chain operations. For over 50 years we have been providing tax, audit and assurance, and advisory services to both domestic and international clients. We are industry specialists providing unique insight and expertise to the industries we serve. The businesses we serve benefit from our in-depth knowledge of the industry-specific challenges and opportunities they face. HLB Gross Collins, P.C. has served manufacturing and distribution clients for many years and has the insight and expertise needed to guide clients to financial success and stability during challenging times, as well as during prosperous times.Who should attend:Competitive Manufacturing Leaders who want to increase revenue, lower operating costs, and prepare for the future. 

InoVentive Benefits ConsultingWe discussed information that helps manufacturing leaders navigate to a successful future beyond the COVID 19 pandemic. These unique solutions will help you survive and thrive through these challenging times.A vital factor in operating a profitable manufacturing company is properly managing each element of your businesses’ supply chain. Why shouldn’t the same hold true for your company’s healthcare plan? Right now, manufacturers continue to accept rising premiums on subpar plans that are increasingly passing the buck to employees as a cost of doing business. There is a better way, and it starts with understanding that the vast majority of healthcare expenses are variable — and therefore controllable. By learning the four areas where a manufacturing company can have the biggest impact on plan costs, what it takes to offer competitive benefits, and why you should never accept that “the claims are the claims,” you will have a better understanding of how you can move beyond annual rate hikes and into real, cost-effective benefits plan management.Topics include:The four vertical of the Healthcare Supply chainHow to leverage the Healthcare Supply Chain and maximize your bottom lineHow to add control and predictability to you second/third largest business expense Marcy S. Heath, Founder & CEO of InoVentive Benefits Consulting has been recognized as a leader in the employee benefits field. Marcy was selected as EBA’s Top Women in Benefits Advising, honored by NAHU, Circle of Excellence as a Soaring Eagle for business written and retained. Marcy assisted in writing a book, NextGeneration Healthcare which hit the Amazon Best Seller list in two categories. Marcy has 26 years invested in the insurance profession with extensive knowledge in employee benefits, risk management, and mitigation.InoVentive Benefits Consulting is a forward-thinking, innovative Benefits Consulting Firm and a part of the largest Nationwide Partnership with Benefit Firms located across the United States. With a National footprint, InoVentive Benefits Consulting services employers across the United States with innovative benefits and superior customer service.About InoVentive Benefits Consulting:InoVentive Benefits Consulting is proud to offer and maintain benefits for approximately 400 employers, with accounts in the North West Georgia region, South Georgia, and across the State.InoVentive Benefit Consulting business philosophy is to create and nurture positive employee and customer relationships where we are all better as a result of having one another in each other’s lives. The pragmatic application of this philosophy is to ensure that there is a constant flow of respect for time, care for each other’s well being, and support for our mutual success in the form of providing instructions, knowledge, and resources necessary to get the job done to the best of everyone’s ability. BONUS:  FREE ebook from InoVentive Benefits Consulting- The Definitive Guide to Health and Benefit Plans for Manufacturing Companies. Why fully insured premiums always increase.Click HERE to download the ebook 

Ray Bitzel, President, and CEO of CartFuze shares information about e-commerce solutions that many manufacturers thought were impossible. These unique solutions may help you survive and thrive through these challenging times.Topics include:SEO / Search Engine Optimization that actually WORKRay BitzelRay brings more than 30 years of international manufacturing, supply chain and business development experience to CartFuze.Throughout his career, Ray has worked closely with multiple industries including construction, rail, aerospace, automotive, energy, and retail. Prior to co-founding CartFuze, he was President of H-E Parts Construction (a division of Hitachi Construction) and VP Global Business Development at Wheelabrator Group. His primary responsibilities included overall P&L management, M&A development and global vertically integrated supply chains.About CartFuze:CartFuze was created out of frustration as a manufacturer looking for a nonproprietary, easy to use, and low-cost eCommerce solution. Our team has decades of manufacturing experience and understands what manufacturers like Sunbelt, Hitachi and Romac need to be successful online. CartFuze solves complicated eCommerce issues such as part search, shipping, and catalog pricing for B2B and/or D2C manufacturers of all sizes.Who should attend:Competitive Manufacturing Leaders who want to increase revenue, lower operating cost, and prepare for the future. Did your business thrive during COVID-19?Frustrated MFG leaders who know that there is a better, more cost-effective way but haven’t been able to find it.

Ray Bitzel, President, and CEO of CartFuze shares information about e-commerce solutions that many manufacturers thought were impossible. These unique solutions may help you survive and thrive through these challenging times.Topics include:Busting B2B and D2C eCommerce MythsSales Tax. Owners & Officers beware!SEO / Search Engine Optimization that actually WORKRay BitzelRay brings more than 30 years of international manufacturing, supply chain and business development experience to CartFuze.Throughout his career, Ray has worked closely with multiple industries including construction, rail, aerospace, automotive, energy, and retail. Prior to co-founding CartFuze, he was President of H-E Parts Construction (a division of Hitachi Construction) and VP Global Business Development at Wheelabrator Group. His primary responsibilities included overall P&L management, M&A development and global vertically integrated supply chains. About CartFuze:CartFuze was created out of frustration as a manufacturer looking for a nonproprietary, easy to use, and low-cost eCommerce solution.  Our team has decades of manufacturing experience and understands what manufacturers like Sunbelt, Hitachi and Romac need to be successful online.  CartFuze solves complicated eCommerce issues such as part search, shipping, and catalog pricing for B2B and/or D2C manufacturers of all sizes. Who should attend:Competitive Manufacturing Leaders who want to increase revenue, lower operating cost, and prepare for the future.  Did your business thrive during COVID-19?Frustrated MFG leaders who know that there is a better, more cost-effective way but haven’t been able to find it. 

In this episode of Manufacturing News Network we discussed information that helps manufacturing leaders navigate to a successful future beyond the COVID 19 pandemic.Russell Dunlap - Partner - Taylor English shared best practices that his team has observed throughout America. These unique solutions may help you survive and thrive through these challenging times. Topics included:Understanding intellectual property and the differences between patents, trademarks, copyrights, and trade secrets Clarifying legal rights concerning intellectual property in the United States and internationally Simple tips for manufacturers and service providers to identify and protect their technology and competitive advantage Russell DunlapRussell Dunlap is a member of Taylor English’s Intellectual Property Department, where he assists in patent, trademark, and copyright preparation, prosecution, and litigation. Mr. Dunlap has drafted and prosecuted numerous patent applications in a wide range of technologies in the mechanical arts, including water infrastructure components, cosmetics, clothing and other textiles, architectural products, medical devices, corrugated cardboard products and packaging, venting and drying technology, equestrian and pet equipment, and many varieties of consumer goods. About Taylor English:Taylor English Duma LLP is a full-service law firm based in Atlanta, Georgia. Our clients range from Fortune 500 businesses, mid-cap companies, and start-ups to local governments, schools, and individuals. The firm was started in 2005 and has grown from four to 170 attorneys, making us the ninth largest law firm in Atlanta. In 2018, we were recognized as a Small Giant by Forbes. Taylor English is the first law firm to win the recognition. Follow Russell Dunlap on LinkedIn at https://www.linkedin.com/in/russdunlap/Subscribe to the podcast at https://manufacturing-news-network.simplecast.com/ Join Georgia Manufacturing Alliance - https://www.georgiamanufacturingalliance.com/joingmatoday If you are interested in being featured on the Manufacturing News Network, email your contact information to support@georgiamanufacturing.com - Include MNN Guest in the subject line.

GMA Support Partner Spotlight  - Tri-MeritWe discussed information that will help manufacturing leaders navigate to a successful future beyond the COVID 19 pandemic.Randy Crabtree - Co-Founder & Partner & Rob Kling- Regional Director with at Tri-Merit will share best practices that his team has observed throughout America. These unique solutions may help you survive and thrive through these challenging times.Topics will include:Learn about different qualifying activities involved with proprietary product manufacturing vs. contract manufacturingHear how prototype expenses can increase because of new 174 prototype regsHear how past and future legal cases such as TG Missouri and Shilo may impact your clients’ ability to claim the R&D tax credit.Review of cost segregation depreciation examples for manufacturing and industrial facilitiesAbout Tri-Merit:Tri-Merit helps manufacturers of all sizes realize substantial savings through specialty tax credits. The depth of manufacturing knowledge and experience you receive with Tri-Merit is unsurpassed. Our engineers and CPAs have worked with all types and sizes of manufacturers to assess how the R&D tax credit and cost segregation will improve their cash flow and reduce their tax burden. Best of all, we work closely with CPAs and CFO’s to ensure the claims are documented and substantiated in time to meet all IRS deadlines. We stand behind all our work with a guaranteed audit defense included on every project.Follow Rob Kling on LinkedIn at https://www.linkedin.com/in/rob-kling-440a9557/Follow Randy Crabtree on LinkedIn at https://www.linkedin.com/in/randy-crabtree-1945a67/ Suggested reading: - Good To Great by Jim Collins  BUY IT HERE- Profit First by Mike Michalowicz - BUY IT HERE Subscribe to the podcast at https://manufacturing-news-network.simplecast.com/Join Georgia Manufacturing Alliance - https://www.georgiamanufacturingalliance.com/joingmatodayIf you are interested in being featured on the Manufacturing News Network, email your contact information to support@georgiamanufacturing.com - Include MNN Guest in the subject line.

Jason Moss, host of Manufacturing News Network interviews Lt. Col Waldo Waldman as part of the "Leadership Lessons" series.Waldo shares his experiences as a decorated fighter pilot  and how leaders should react under pressure. Doing your part of a mission is critical and you should support others on your team. It is not easy being a Wingman, but it is essential to success.Waldo shares as a special offer during this episode for those who are serious about growing as a leader. Connect with Waldo https://www.linkedin.com/in/waldowaldman/https://yourwingman.com/ Recommended Reading:Never Fly Solo   http://bit.ly/NeverFlySolo Subscribe to the podcast at https://manufacturing-news-network.simplecast.com/ Join the Georgia Manufacturing Alliance - https://www.georgiamanufacturingalliance.com/joingmatodayIf you are interested in being featured on the Manufacturing News Network, email your contact information to support@georgiamanufacturing.com - Include MNN Guest in the subject line.

Shay Foley is the General Manager of the Alcon facility in Johns Creek Georgia. He leads a team of 1700 employees that produce over 5 million contacts per day. Shay shares how his team moves with VELOCITY. Who is Alcon?Alcon is the global leader in eye care, dedicated to helping people see brilliantly. With our 70-plus-year heritage, we are the largest eye care device company in the world – with complementary businesses in Surgical and Vision Care. Being a truly global company, we work in over 70 countries and serve patients in more than 140 countries. We have a long history of industry firsts, and each year we commit a substantial amount in Research and Development to meet customer needs and patient demands. Recommended Reading - Do Big Things - https://amzn.to/3bNZvUf  Follow Shay on LinkedIn at https://www.linkedin.com/in/shay-foley-04003b1/ Learn more about Alcon at https://www.alcon.com/  Subscribe to the podcast at https://manufacturing-news-network.simplecast.com/ Join Georgia Manufacturing Alliance - https://www.georgiamanufacturingalliance.com/joingmatoday If you are interested in being featured on the Manufacturing News Network, email your contact information to support@georgiamanufacturing.com - Include MNN Guest in the subject line.  

Joseph Solheid - Director of Safety Sales with Fastenal shares best practices that his team has observed throughout America. These unique solutions may help you survive and thrive through these challenging times.Topics included:How to keep employees safe and productive.Unique solutions to solve tough problems in the global supply chain.Success stories from across the country.About Fastenal:Today, Fastenal is many things to many different customers: an expert consultant, a logistics company, a technology provider, and more generally, a distributor of wide-ranging industrial and construction products. These aspects of our service share a common foundation: great people, close to our customers. Follow Joseph on LinkedIn at https://www.linkedin.com/in/jsolheidqssp/ Learn more about Fastenal  - https://www.fastenal.com/ Subscribe to the podcast at https://manufacturing-news-network.simplecast.com/ Join Georgia Manufacturing Alliance - https://www.georgiamanufacturingalliance.com/joingmatoday If you are interested in being featured on the Manufacturing News Network, email your contact information to support@georgiamanufacturing.com - Include MNN Guest in the subject line. 

Key topics covered:Changes in architectural design due to COVID-19Examples of businesses pivoting and re-inventing themselves.Preparing future generations in manufacturing.Leadership Books MentionedBuilding a Story Brand - ORDER HERE - https://amzn.to/319px0sRichard Branson - Autobiography - ORDER HERE - https://amzn.to/2YfEM62 Learn more about American Metalcraft - http://www.americanmetalcraft.com/Follow Holly on LinkedIn at  https://www.linkedin.com/in/holly-gotfredson/ Subscribe to the podcast at https://manufacturing-news-network.simplecast.com/ Join Georgia Manufacturing Alliance - https://www.georgiamanufacturingalliance.com/joingmatoday 

Beau Groover and Jason Moss discuss how leaders can grow and have the biggest impact on their teams.Key topics include:How to break through the plateau that many manufacturing leaders encounter.How to fix ineffective Continuous Improvement (CI) training with a quantifiable ROI.Develop your team while creating Buy-In from your culture.Watch the full video interview online at https://www.georgiamanufacturingalliance.com/news/mfg-news-networkConnect with Beau at beau@tes.run https://www.linkedin.com/in/beaugroover/ Leadership Books MentionedBuilding a Story Brand - ORDER HERE - https://amzn.to/319px0s Subscribe to this podcast at https://manufacturing-news-network.simplecast.com/ Join Georgia Manufacturing Alliance - https://www.georgiamanufacturingalliance.com/joingmatoday

Yariv Sivan of Intelligent Energy Optimizers shares a little bit of his background and the amazing journey that has led him to his current role as CEO. Yariv provides details on how CFO's and CEO's he serves are able to have an immediate positive impact on their bottom line as a result of the products his company offers.  Leadership Books MentionedBuilding a Story Brand - ORDER HERE - https://amzn.to/319px0sSubscribe to this podcast at https://manufacturing-news-network.simplecast.com/ Join Georgia Manufacturing Alliance - https://www.georgiamanufacturingalliance.com/joingmatoday

Podcast introduction by Jason Moss, host of the Manufacturing News Network