ModelGeek's Podcast

Show Outline:Welcome to Episode 101 of the Modelgeeks Podcast!  Nemo is at the controls, with Frilldo, Whitey, and El Prez backing him up, making sure the gauges are green and the panels are clean!  We have a special introduction by Emmett Kegel who is a Lego Jedi Master!  The show starts with what's on our bench and what we picked up.  Then we dive into new stuff and “What's New in 72!”.  After a brief show update, we hit everyone's favorite: "Mail Call!!" Finally, our main topic, an interview with John Miller from Model Paint Solutions. A huge thank you to all of our listeners for their continued support. We hope to see you out and about during the the 2025 model show season. Please swing by our table and say hello.  We may even put you in front of the mic!Contact the Geeks:If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, email, and our new website.   contact@modelgeekspodcast.comMake sure you check out our group / community on Facebook: The ModelGeeks Model Shack***NEW MODELGEEKS WEBSITE!!!!***Please check out our new website!!  www.modelgeekspodcast.comWe have links to our Episodes, “Meet the Geeks”, What's on our Bench, a Listener Gallery, and our Gee-Dunk Store!!  Email us pics of your completed models and we'll start placing them on the website under the “Listener Gallery” section.  We want to see what's on your  bench.  The Geeks Gee-Dunk store is ALIVE AND KICKING!!!  You can purchase yourself some genuine Geeks Gear!!  Please swing by and check it out.Be sure to check out the Kotare 1/32 Bf-109K-4 Test Shot Build tab on the main page of our website. Follow Nemo along with pics and detailed descriptions as he progresses through the build.Modelgeeks Sponsors:When you have the time, pay a visit to their web sites, and have a look at their fine products.Tamiya USA, Furball Aero-Design, Detail and Scale, Sprue Brothers, LionHeart Hobby, Bases by Bill, Hypersonic Models, and Matters of ScaleFellow Podcasts:We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other amazing modeling podcasts. Hopefully, someday we'll earn our podcast wings and be able to keep up with those guys!  Please check them out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsMatters of ScaleModel Airplane MakerInch High GuySupport the show via Patreon.Support the show via PayPal.Thank You's!!Alright, alright, alright!!  That's it for now, hope you enjoy the latest podcast.  Be excellent to each other and get out there and build something!  -Out from the Geeks! Support the showModel Geeks PodcastSupport the showModel Geeks PodcastSupport the showModel Geeks Podcast

Welcome to Episode 100 of The ModelGeeks Podcast—a major milestone and a celebration of our journey through the world of scale modeling! We finally made it to triple digits, and we couldn't have done it without YOU. A heartfelt thank you to all our listeners for your incredible support along the way. Here's to the next 100 episodes!In this episode, the Geeks reflect on the road so far and look ahead to what's next. Of course, we've been busy at the bench (and burning up the credit cards), so we'll chat about the latest kits, tools, and goodies hitting the modeling scene—and which ones we just couldn't resist.As spring rolls in, we hope your bench time is in full swing and that you're putting the finishing touches on your next contest entry or display piece. Don't forget to share your work with us and the community through our website or Facebook group—we love seeing your builds, and you might just inspire someone else to get modeling!Modelgeeks web page:The ModelGeeks Podcast website Facebook community:The ModelGeeks Model Shackand of course you can email us at:contact@modelgeekspodcast.comMentioned in the Episode:Robbie Nauffts "The Model Guy" on YouTube. Lots of great model building videos for you to check out.  Here's a link to his latest episode on the MH-60L from ICM.ICM's All New MH-60L Blackhawk! Full build Review We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USADetail & ScaleSprueBrothersLionHeart HobbyBases By BillHypersonic ModelsMatters Of ScaleIf you're a wicked ModelGeek go check out the following links!IPMS USA Events PageWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the show Support the showModel Geeks Podcast

Episode 99 - MosquitoCon & Model ClassicWelcome to Episode 99 of The Modelgeeks Podcast!  We have a full crew tonight!  After a bit of banter, we share what is on our bench and what we have picked up lately.  We talk about some new modeling related items we've found out there and El-Presidenté tells us “What's New in 72!”.  After a Show & Contest update and Mail Call we discuss the latest shows we've been to — MosquitoCon up in Wayne NJ and Model Classic over in Northern VA.We would like to thank all our listeners out there for the continued support you have given the show. We hope to see you out and about as we hit show circuit. If you happen to see us at a show come on over and say hello, we may even put you in front of the mic!If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and of course email at:contact@modelgeekspodcast.com Also remember to surf over to the Geeks homepage at https://modelgeekspodcast.com.  While there you can buy some gedunk and subscribe for updates from the Geeks.  Take a look at the Listener Gallery, and if you'd like your work there, send us the photos at contact@modelgeekspodcast.com   Make sure you check out our group / community on Facebook:The ModelGeeks Model Shack  Get on there and feel free to share your work! We want to see what's on your bench.We also want to thank each of our sponsors for their support. We are very lucky to have them. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignDetail & Scale Tamiya USA SprueBrothers LionHeart HobbyBases By BillHypersonic ModelsMatters of ScaleWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Matters of ScaleModel Airplane Maker Inch High GuySupport the show via Patreon.Support the show via PayPal.Support the showModel Geeks Podcast

Welcome to Episode 98 of The Modelgeeks Podcast!   We've all been busy at the bench through March! We'll talk about cool new items coming our way, and what we've picked up lately, as well as pay a visit to the Modelgeeks web page's “Listener Gallery” and have a look at the great work from you folks out there. For our main topic of discussion, we pull from the Mail Bag! Mr. Robbie Nauffts of Alberta Canada asks:   “How do you research a subject for a build?” Are you looking at a specific aircraft? Or a cross section of similar aircraft? What happens when Samo is planning a build compared to Frilldo? Exc.Do we always go to the books for a build, or can we just relax and go out of the box and just enjoy building a model kit? Or is doing research part of the enjoyment? We each have our take on it. We would like to thank all you listeners out there for the continued support you have given the show. Share your work with us and the rest of the scale modeling community through our web page, or through our Facebook community page. We love seeing other people's work. Who knows who you may inspire someone through your latest masterpiece! Modelgeeks web page: Model Geeks PodcastFacebook community: The ModelGeeks Model Shack …and of course you can email us at: contact@modelgeekspodcast.com Mentioned in the Episode:PAXCON 2025Hobbyshop Shoutout!John's Models We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products. Sponsors:Furball Aero-DesignTamiya USADetail & ScaleSprueBrothersLionHeart HobbyBases By BillHypersonic ModelsMatters Of ScaleIf you're a wicked ModelGeek go check out the following links! IPMS USA Events PageButch O'Hare Modeling ClubThe Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts. Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the showSupport the showModel Geeks Podcast Support the showModel Geeks Podcast

Welcome to Episode 97 of The Modelgeeks Podcast!  In this episode, the Modelgeeks are joined by the one and only Geoff Martin of Furball Aero-Design decals.  Furball joins the geeks in the formation and goes for a lap in the pattern. Furball gives some insight to how the Furball Brand came to be.  The Geeks get the news form one of the industry leaders when it comes to aftermarket decals. The Geeks answer mail, take a lap in the pattern around the Modelgeeks website and say what has stood out to them.  For the main topic, Furball propose the topic of what were some of your game changers in your toolbox. The Geeks go around the pattern and discuss what their game changers were and how they have helped them get to where they are today.  We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.com Be sure to check out our website: www.modelgeekspodcast.com. Make sure you check out our new group / community on Facebook, The ModelGeeks Model Shack We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USASprueBrothersBases by Bill Also, if you're interested in the model shows, click the link below!IPMS USA Events Page We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Model Airplane MakerSupport the showModel Geeks Podcast

Show Outline:Welcome to Episode 96 of the Modelgeeks Podcast!  Nemo is at the controls, with the entire crew backing him up, making sure the gauges are green and the panels are clean!  Settle in for an awesome show with your green pajama wearing Geeks! The show starts with what's on our bench, and what we picked up.  Then we dive into new stuff and “What's New in 72!”.  After a brief show update, we hit everyone's favorite: "Mail Call!!" Finally, our main topic is all about Chipping. A huge thank you to all of our listeners for their continued support. We hope to see you out and about during the the 2025 model show season. If you happen to see us at a show, please swing by our table and say hello.  We may even put you in front of the mic!Contact the Geeks:If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, email, and our new website.   contact@modelgeekspodcast.comMake sure you check out our group / community on Facebook: The ModelGeeks Model Shack***NEW MODELGEEKS WEBSITE!!!!***Please check out our new website!!  www.modelgeekspodcast.comWe have links to our Episodes, “Meet the Geeks”, What's on our Bench, a Listener Gallery, and our Gee-Dunk Store!!  Email us pics of your completed models and we'll start placing them on the website under the “Listener Gallery” section.  We want to see what's on your  bench.  The Geeks Gee-Dunk store is ALIVE AND KICKING!!!  We have Short and Long Sleeve T-Shirts, Hoodies, Mousepads, and Mugs.  You can purchase yourself some genuine Geeks Gear!!  Please swing by and check it out.Modelgeeks Sponsors:When you have the time, pay a visit to their web sites, and have a look at their fine products.Tamiya USA, Furball Aero-Design, Detail and Scale, Sprue Brothers, LionHeart Hobby, Bases by Bill, Hypersonic Models, and Matters of ScaleFellow Podcasts:We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other amazing modeling podcasts. Hopefully, someday we'll earn our podcast wings and be able to keep up with those guys!  Please check them out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsMatters of ScaleModel Airplane MakerInch High GuySupport the show via Patreon.Support the show via PayPal.Thank You's!!Alright, alright, alright!!  That's it for now, hope you enjoy the latest podcast.  Be excellent to each other and get out there and build something!  -Out from the Geeks! Support the showModel Geeks PodcastSupport the showModel Geeks Podcast

Welcome to Episode 95 of The Modelgeeks Podcast!  In this episode we were very fortunate in this episode to sit down and speak with Mark Robson of Kōtare Scale ModelsAs always, we've all been busy at the bench…and at our keyboards! We'll talk about cool new items coming our way, and what we've worn out the ol' credit card on as well.We would like to thank all you listeners out there for the continued support you have given the show. As we roll through Winter and on towards springtime, I hope that your bench is active and you're completing those subjects that you plan to share with the modeling public out at a show or contest. Get to the bench and build something!Share your work with us and the rest of the scale modeling community through our web page, or through our Facebook community page. We love seeing other people's work. Who knows who you may inspire someone through your latest masterpiece!Modelgeeks web page:Model Geeks PodcastFacebook community:The ModelGeeks Model Shackand of course you can email us at:contact@modelgeekspodcast.com Mentioned in the Episode:Masters of the Air Behind the Scenes, a Facebook page taking a behind the scenes look at what went in to making the MOTA. Lots of great reference photos of aircraft support equipment, vehicles, uniforms, etc.Masters Of The Air Behind The Scenes  We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products. Sponsors:Furball Aero-DesignTamiya USADetail & ScaleSprueBrothersLionHeart HobbyBases By BillHypersonic ModelsMatters Of ScaleIf you're a wicked ModelGeek go check out the following links!IPMS USA Events PageButch O'Hare Modeling ClubThe Interesting Modeling CompanyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts. Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the showSupport the showModel Geeks PodcastSupport the showModel Geeks Podcast

Welcome to Episode 94 of The Modelgeeks Podcast!  We have a full crew tonight!  After a bit of banter, we share what is on our bench and what we have picked up lately.  We talk about some new modeling related items we've found out there and  El-Presidenté tells us “What's New in 72!”.  After a Show & Contest update and Mail Call we discuss how Model Geeks will be modeling in the future, say 5-10 years — technologies, techniques, paints, adhesives, and decals.We would like to thank all our listeners out there for the continued support you have given the show. We hope to see you out and about as we hit show circuit. If you happen to see us at a show come on over and say hello, we may even put you in front of the mic! If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and of course email at:contact@modelgeekspodcast.com Also remember to surf over to the Geeks homepage at https://modelgeekspodcast.com.  While there you can buy some gedunk and subscribe for updates from the Geeks.  Take a look at the Listener Gallery, and if you'd like your work there, send us the photos at contact@modelgeekspodcast.com Make sure you check out our group / community on Facebook:The ModelGeeks Model Shack Get on there and feel free to share your work! We want to see what's on your bench.We also want to thank each of our sponsors for their support. We are very lucky to have them. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignDetail & ScaleTamiya USASprueBrothersLionHeart HobbyBases By BillHypersonic ModelsMatters of ScaleWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Matters of ScaleModel Airplane Maker Inch High GuySupport the show via Patreon.Support the show via PayPal.Support the showModel Geeks Podcast

Welcome to Episode 93 of The Modelgeeks Podcast!  In this episode, we kick off Season 5 and catch up with what we have all been up to during our extended seasonal break. I don't think we planned to be away from the mic for a full month and a half but…We've all been busy at the bench…and at our keyboards! We'll talk about cool new items coming our way, and what we've worn out the ol' credit card on as well.We would like to thank all you listeners out there for the continued support you have given the show. As we roll through Winter and on towards springtime, I hope that your bench is active and you're completing those subjects that you plan to share with the modeling public out at a show or contest. Get to the bench and build something!Share your work with us and the rest of the scale modeling community through our web page, or through our Facebook community page. We love seeing other people's work. Who knows who you may inspire someone through your latest masterpiece!Modelgeeks web page:Model Geeks PodcastFacebook community:The ModelGeeks Model Shackand of course you can email us at:contact@modelgeekspodcast.com Mentioned in the Episode:Masters of the Air Behind the Scenes, a Facebook page taking a behind the scenes look at what went in to making the MOTA. Lots of great reference photos of aircraft support equipment, vehicles, uniforms, etc.Masters Of The Air Behind The Scenes  We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products. Sponsors:Furball Aero-DesignTamiya USADetail & ScaleSprueBrothersLionHeart HobbyBases By BillHypersonic Models Matters Of ScaleIf you're a wicked ModelGeek go check out the following links!IPMS USA Events PageButch O'Hare Modeling ClubThe Interesting Modeling CompanyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts. Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the showSupport the showModel Geeks Podcast

Welcome to Episode 92 of The Modelgeeks Podcast!  In this episode, the Modelgeeks take the listeners for a lap in the pattern and leads the geeks on a “Year in Review” of their favorite, kits, shows, and new skillz they have added in 2024 and what they are looking forward to in 2025! Join the geeks as they close out 2024 and give the list of the things they are looking forward to in 2025.  The geeks answer gives the rundown of the new products and stuff hitting the streets.  Listen as the geek answer the mail. Be sure to swing by the ModelGeeks website and get updates on the Privateer and other projects the geeks are working on.  While you are there be sure to check out the geeks “Geedunk” and get your model Geeks podcast apparel and other geeks stuff.  Also submit your pics for the Listeners gallery! You can find the geeks at www.modelgeekspodcast.com. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.com Make sure you check out our new group / community on Facebook, The ModelGeeks Model Shack We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail and ScaleFurball Aero-DesignTamiya USALionheart HobbySprueBrothersBases by BillHypersonic Models Also, if you're interested in the model shows, click the link below!IPMS USA Events Page We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Model Airplane MakerSupport the showModel Geeks Podcast

Show Outline:Welcome to Episode 91 of the Modelgeeks Podcast!  Nemo is at the controls, with Frilldo and Whitey backing him up, making sure the gauges are green and the panels are clean!  El Prez and D-Ran are med down so no flying for them.  Settle in for an awesome show with your green pajama wearing Geeks! The show starts with what's Krack-A-Lackin', what's on our bench, and what we picked up.  Then we dive into new stuff and “What's New in 72!”.  Mail Call checks out 2 emails; one from Robert Olsen asking about silky smooth finishes, and the other from Ken Cox inquiring about our choice of best model shows in the states.  Finally, our main topic is all about weathering.  A huge thank you to all of our listeners for their continued support. We hope to see you out and about during the the 2025 model show season. If you happen to see us at a show, please swing by our table and say hello.  We may even put you in front of the mic!Contact the Geeks:If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, email, and our new website.   contact@modelgeekspodcast.com Make sure you check out our group / community on Facebook: The ModelGeeks Model Shack***NEW MODELGEEKS WEBSITE!!!!***Please check out our new website!!  www.modelgeekspodcast.comWe have links to our Episodes, “Meet the Geeks”, What's on our Bench, a Listener Gallery, and our Gee-Dunk Store!!  Email us pics of your completed models and we'll start placing them on the website under the “Listener Gallery” section.  We want to see what's on your bench.  The Geeks Gee-Dunk store is ALIVE AND KICKING!!!  We have Short and Long Sleeve T-Shirts, Hoodies, Mousepads, and Mugs.  You can purchase yourself some genuine Geeks Gear!!  Please swing by and check it out.Modelgeeks Sponsors:When you have the time, pay a visit to their web sites, and have a look at their fine products.Furball Aero-DesignDetail and Scale Tamiya USA SprueBrothers LionHeart HobbyBases by BillHypersonic ModelsFellow Podcasts:We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other amazing modeling podcasts. Hopefully, someday we'll earn our podcast wings and be able to keep up with those guys!  Please check them out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with Frets Matters of ScaleModel Airplane Maker Inch High GuySupport the show via Patreon.Support the show via PayPal.Thank You's!!Alright, alright, alright!!  That's it for now, hope you enjoy the latest podcast.  Be excellent to each other and get out there and build something!  -Out from the Geeks! Support the showModel Geeks Podcast

Welcome to Episode 90 of The Modelgeeks Podcast!  In this episode, after a little banter in the beginning, we discuss what we are in work on, what we have picked up lately, and what new items are out there, We finish with a recap of El Presidentè's experience in Belgium, Luxembourg, and the Netherlands, to include Scale Model Challenge 2024.We would like to thank all our listeners out there for the continued support you have given the show. As we roll through Fall and on towards winter, I hope that your bench is active heading into the heart of the “build season”. Get to the bench and build something!Share your work with us and the rest of the scale modeling community through our web page, or through our Facebook community page. We love seeing other people's work. Who knows who you may inspire through your latest masterpiece!Modelgeeks web pageThe ModelGeeks Model Shackand of course you can email us at: contact@modelgeekspodcast.comMentioned in the Episode:Matters of Scale / John ColisanteAnyz ModelsBorder ModelsAOA DecalsTableWar Tower CasesPost on CVW Air Wing configurationsWe also want to thank each of our sponsors for their generous support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USADetail & ScaleSprueBrothersLionHeart HobbyBases By BillHypersonic ModelsIf you're a true ModelGeek go check out the following links!IPMS USA Events PageButch O'Hare Modeling ClubThe Interesting Modeling CompanyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs we like:The Kit BoxSprue Pie with FretsModel Airplane MakerOther links:Support the show via PayPalSupport the show via PatreonSupport the showModel Geeks Podcast

Welcome to Episode 89 of The Modelgeeks Podcast!  In this episode, we kick off with what we are all in work on, what new items are out there, and what we have picked up lately. El-Presidenté will tell us “What's New in 72!”, some cool stuff coming out of the recent All Japan Model and Hobby Show, and we'll end with a discussion on aftermarket kit items…what's Good, what's Bad, and what's just Ugly! In between we have an interview with Hypersonic Models own Jeffrey Kubiak, coming to us all the way from Nara, Japan to tell us all about his company, his products, what drives his creativity, and where the aftermarket resin scene is going in the wake of 3D printing.We would like to thank all you listeners out there for the continued support you have given the show. As we roll through Fall and on towards winter, I hope that your bench is active heading into the heart of the “build season”. Get to the bench and build something!Share your work with us and the rest of the scale modeling community through our web page, or through our Facebook community page. We love seeing other people's work. Who knows who you may inspire someone through your latest masterpiece!Modelgeeks web page:Model Geeks PodcastFacebook community:The ModelGeeks Model Shackand of course you can email us at:contact@modelgeekspodcast.com Mentioned in the Episode:U.S. Navy Cruise Books Arma Hobby Free STL Files Jakub Cikhart's Desert Storm Aircraft Page  We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products. Sponsors:Furball Aero-DesignTamiya USADetail & ScaleSprueBrothersLionHeart HobbyBases By BillHypersonic Models If you're a wicked ModelGeek go check out the following links!IPMS USA Events PageButch O'Hare Modeling ClubThe Interesting Modeling CompanyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts. Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the showSupport the showModel Geeks Podcast

Welcome to Episode 88 of The Modelgeeks Podcast!  In this episode, the Modelgeeks take the listeners for a lap in the pattern and Frilldo assumes the Lead for this episode and leads the geeks as they discuss what new items they have picked up.  D-Ran is back in the saddle and has assumed the “Boss” position with the geeks. The geeks give D-Ran the “business” and task him with a few episodes, only to be out witted by the Boss.  The Geeks brief the listeners on what new kits are hitting the streets in the future. The Geeks answer mail, take a lap in the pattern around the Modelgeeks Model Shack on FB and say what has stood out to them.  For the main topic, a long time listener sent the geeks a message and asked the question, :What are the Geeks favorite movies to watch to help motivate you”? Well that couldn't have worked out any better and Frilldo asks the geeks what are their favorite movies to watch while at the bench, and for aircraft modelers, the answers are interesting. We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.com Make sure you check out our new group / community on Facebook, The ModelGeeks Model Shack We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USASprueBrothersBases by Bill Also, if you're interested in the model shows, click the link below!IPMS USA Events Page We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Model Airplane MakerSupport the showModel Geeks Podcast

Welcome to Episode 87 of The Modelgeeks Podcast!  Nemo's your host with Frilldo, Whitey, and El Presidente!  D-Ran is on vacation, but he'll be back soon.  We jump right in and as Frilldo would say, find out what's "Krack-a lackin'" as we chat about what's on our bench and what we have picked up lately.  Next we will dive into what is new and let   El-Presidenté tells us “What's New in 72!”.  During our Show & Contest update we'll also let El Prez chat about Penn Con 2024.  Mail Call will be up next followed by our main topic: “Painting Cockpits.” We would like to thank all our listeners out there for the continued support you have given the show. We hope to see you out and about during the final stretch of the 2024 model show season. If you happen to see us at a show, please swing by our table and say hello.  We may even put you in front of the mic! If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and of course email at:contact@modelgeekspodcast.com     Make sure you check out our group / community on Facebook:The ModelGeeks Model Shack   Get on there and feel free to share your work!  We want to see what's on your bench. We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-Design Tamiya USA SprueBrothers LionHeart HobbyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts. Blogs:The Kit Box Sprue Pie with Frets Matters of ScaleModel Airplane Maker Inch High GuySupport the show via Patreon.Support the show via PayPal.A huge thank you to all or supporters and sponsors.  We truly appreciate all your support.  Alright, alright, alright!!  That's it for now, hope you enjoy the latest podcast, so be excellent to each other and by all means, get out there and build something!-Out from the geeks, take care everyone! Support the showModel Geeks Podcast

Welcome to Episode 86 of The Modelgeeks Podcast!  We have a full crew tonight!  After a bit of banter and D-ran catching us up on his time in Oz, we share what is on our bench and what we have picked up lately.  We talk about some new modeling related items we've found out there and  El-Presidenté tells us “What's New in 72!”.  After a Show & Contest update and Mail Call we discuss Vignettes & Dioramas, challenges in creating them and our attempts in the past.We would like to thank all our listeners out there for the continued support you have given the show. We hope to see you out and about as we hit the remaining shows in 2024. If you happen to see us at a show come on over and say hello, we may even put you in front of the mic!If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and of course email at: contact@modelgeekspodcast.com Make sure you check out our group / community on Facebook: The ModelGeeks Model ShackGet on there and feel free to share your work! We want to see what's on your bench.We also want to thank each of our sponsors for their support. We are very lucky to have them. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-Design Tamiya USA SprueBrothers LionHeart HobbyIf you're a true ModelGeek go check out the following links mentioned in this episode!Dogfight StudioMilModResKit ModelsClear Prop ModelsKit MasxIPMS USA Events PageWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts. Blogs:The Kit Box Sprue Pie with Frets Matters of ScaleModel Airplane Maker Inch High GuySupport the show via Patreon.Support the show via PayPal.Support the showModel Geeks Podcast

The Geeks hit the road and hit up the IPMS Roanoke Valley's “Virginia Shootout” show. Nothing beats a quick weekend trip with your modeling buddies, especially when a show is happening, the kit deals are HOT and the Mexican food is muy bueno! Toss in a few beers with friends and it's practically impossible to top for a real Modelgeek! In this episode we recap our trip to southwestern Virginia and the Virginia Shootout. We had a great time, saw some great models and made some awesome deals on kits that we'd each been looking for. We sit down with show Co-Chair Greg Clower and he gives us a history of the show and the club.  D-ran is still MIA so we play shorthanded once again…anyone wanna take that 5th seat??? We would like to thank all you listeners out there for the continued support you have given the show. We hope to see you out and about as we hit more of the shows coming up this busy 2024 If you happen to see us at a show, set up at our table, come on over and say hello, we may even put you in front of the mic! El Presidenté mentions Reith Creations (P5M-1 Marlin conversion) in the episode, and here is a link to their page: https://www.riethcreations.com If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and of course email at:contact@modelgeekspodcast.com   Make sure you check out our group / community on Facebook:The ModelGeeks Model Shack Get on there and feel free to share your work! We want to see what's on your bench. We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USASprueBrothershttps://lionhearthobby.com/If you're a wicked ModelGeek go check out the following links!    IPMS USA Events PageButch O'Hare Modeling Club The Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts. Blogs:The Kit Box Sprue Pie with Frets Model Airplane Maker Support the showSupport the Show.Model Geeks Podcast

Welcome to a special episode of The Modelgeeks Podcast!  In this episode, Frilldo and Whitey sit down and Interview, Tim Holland President, Bruce Worrall Vice President Canada and VP of Exhibitions and Dave Goldfinch Vice President and talk about the new model organization “Modellers Without Borders”. Frilldo and whitey ask the important questions of who, what, when, why, and how. Modellers Without Borders will exist alongside IPMS and AMPS. Our illustrious guest go into detail about how they are set up and what belonging to the organization will be like.We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.com Make sure you check out our new group / community on Facebook, The ModelGeeks Model Shackhttps://img1.wsimg.com/blobby/go/ac24d88a-08a8-47fe-961a-a53559fd3d36/IPMS-2024-Madison_Mission-Briefv2.pdf We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USASprueBrothers Also, if you're a real ModelGeek you'll check out the following links!IPMS USA Events Page Butch O'Hare Modeling Club The Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Model Airplane MakerSupport the Show.Model Geeks Podcast

Welcome to Episode 84 of The Modelgeeks Podcast!  In this episode, the Modelgeeks take the listeners for a lap in the pattern and discuss what new items they have picked up since the Nats (really???).  d-Ran is out for work reasons and the Geeks have the con! The geeks answer the listener email, and give a rundown of what is new in the hobby.The Geeks also discuss their travel plans for the upcoming IPMS Roanoke Virginia Shootout 2024.  For the main topic, Whitey, El Presidente, Nemo and Frilldo discuss the items they use for modeling on the go.  The geeks give their tools and tips for modeling while you are away from the bench.We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.com Make sure you check out our new group / community on Facebook, The ModelGeeks Model Shack www.nats2024 https://img1.wsimg.com/blobby/go/ac24d88a-08a8-47fe-961a-a53559fd3d36/IPMS-2024-Madison_Mission-Briefv2.pdf We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USASprueBrothers Also, if you're a real ModelGeek you'll check out the following links!IPMS USA Events Page Butch O'Hare Modeling Club The Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Model Airplane MakerSupport the Show.Model Geeks Podcast

2024 Nats Wrap!Welcome to Episode 83 of The Modelgeeks Podcast!  Tonight we discuss 2024 USA Nats.  Nemo keeps us focused on how much fun we had in Madison, Wisconsin, what we thought of the venue, the contest room, the Tiger Meet, the vendors, and of course the PEOPLE!  Along the way we also chat about what we got, what we missed, and which models we liked the most. We would like to thank all our listeners out there for the continued support you have given the show. We hope to see you out and about as we hit more of the shows coming up this busy 2024. If you happen to see us at a show, set up at our table come on over and say hello, we may even put you in front of the mic. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and of course email at:contact@modelgeekspodcast.com Make sure you check out our group / community on Facebook:The ModelGeeks Model ShackGet on there and feel free to share your work! We want to see what's on your bench.We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-Design Tamiya USA SprueBrothers LionHeart HobbyIf you're a true ModelGeek go check out the following links mentioned in this episode!We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Matters of ScaleModel Airplane Maker Inch High GuySupport the show via Patreon.Support the show via PayPal.Support the Show.Model Geeks Podcast

Welcome to Episode 82 of The Modelgeeks Podcast!  We have a full crew tonight!  After a bit of banter and a sea story or two, we share what is on our bench and what we have picked up lately.  We talk about some new modeling related items we've found out there and  El-Presidenté tells us “What's New in 72!”.  After a Show & Contest update and Mail Call we discuss Tires & Wheels, how we paint them, our preferred methods of masking, and how we do a bit of simple weathering. We would like to thank all our listeners out there for the continued support you have given the show. We hope to see you out and about as we hit more of the shows coming up this busy 2024 as well as at the Nats in Madison Wisconsin. If you happen to see us at a show, set up at our table come on over and say hello, we may even put you in front of the mic!If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and of course email at:contact@modelgeekspodcast.com Make sure you check out our group / community on Facebook:The ModelGeeks Model Shack Get on there and feel free to share your work! We want to see what's on your bench.We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USASprueBrothersLionHeart HobbyIf you're a wicked ModelGeek go check out the following links! Scale Model Paint MasksCounting Rivets ModelsResin2DetailIPMS USA Events PageModel Cave, Ypsilanti, MIWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts. Blogs:The Kit Box Sprue Pie with FretsModel Airplane MakerInch High GuySupport the show via Patreon.Support the show via PayPal.Support the Show.

Welcome to Episode 81 of The Modelgeeks Podcast!  In this episode, we kick off with what we are in work on, what new items are out there, and what we have picked up lately. After a few consecutive episodes being down a man, D-Ran is back in front of the mic along with the whole crew. El-Presidenté will tell us “What's New in 72!”, and we'll end with a discussion on DEADLINES! Some like a deadline to keep them on track, while others despise them and stay well clear of any reason to set one. We would like to thank all you listeners out there for the continued support you have given the show. We hope to see you out and about as we hit more of the shows coming up this busy 2024 as well as at the Nats in Madison Wisconsin. If you happen to see us at a show, set up at our table come on over and say hello, we may even put you in front of the mic! If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and of course email at:contact@modelgeekspodcast.com   Make sure you check out our group / community on Facebook:The ModelGeeks Model Shack Get on there and feel free to share your work! We want to see what's on your bench. We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USASprueBrothershttps://lionhearthobby.com/If you're a wicked ModelGeek go check out the following links!    IPMS USA Events PageButch O'Hare Modeling Club The Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts. Blogs:The Kit Box Sprue Pie with Frets Model Airplane Maker Support the show Support the Show.Support the Show.

Welcome to Episode 80 of The Modelgeeks Podcast!  In this episode, the Modelgeeks discuss how they pack and transport their models.  The same process can be used to store your models as well. Frilldo takes the geeks for a lap in the pattern with an update on the Privateer, trying to avoid having to buy dinner for the other geeks.  The rest of the geeks give an update of what is on their benches and do a run down of the email and a recap on the FB Model Geeks Model shack page.For the main topic, the geeks discuss what they use to build the containers that they use and other materials to safely transport or store your models with the Nats coming right around the corner.  The geeks even tell a few TSA horror stories.We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.com Make sure you check out our new group / community on Facebook, The ModelGeeks Model Shack www.nats2024 https://img1.wsimg.com/blobby/go/ac24d88a-08a8-47fe-961a-a53559fd3d36/IPMS-2024-Madison_Mission-Briefv2.pdf We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USASprueBrothers Also, if you're a real ModelGeek you'll check out the following links!IPMS USA Events Page Butch O'Hare Modeling Club The Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Model Airplane Maker Support the Show.

Welcome to Episode 79 of The Modelgeeks Podcast!  I should be calling this one "Better Late Than Never"!  D-Ran here coming at ya with a heart felt apology for being late with the episode but life just seemed to get in the way.We all have that one tip or trick that we've picked up along the way that's helped us become just a little bit better at the hobby.  In this EXCITING episode the Geeks will discuss what their favorite tips and tricks are.   We would like to thank all you listeners out there for the continued support you have given the show. We hope to see you out and about as we hit more of the shows coming up this busy 2024 as well as at the Nats in Madison Wisconsin. If you happen to see us at a show, set up at our table come on over and say hello, we may even put you in front of the mic!  If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and of course email at:contact@modelgeekspodcast.com Make sure you check out our group / community on Facebook and Discord:The ModelGeeks Model ShackThe ModelGeeks Discord Please check out the up coming Rocky Mountain Hobby Expo. If the text doesn't take you there then please follow this link: https://rockymtnhobbyexpo.com/Get on there and feel free to share your work! We want to see what's on your bench.We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USASprueBrothersDetail and ScaleLionHeart HobbyIf you're a ModelGeek go check out the following links! IPMS USA Events PageWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Support the Show.Support the Show.

Welcome to Episode 78 of The Modelgeeks Podcast!  In this EXCITING episode, we kick off with  what we are in work on, what new items are out there, and what we have picked up lately. We dive into El-Presidenté's exciting news regarding is recent trip to the UK!Rounding out the episode with our main topic we discuss those disgusting little things we call "warts".   What are they? How do you prevent them and last but not least, do really even care about em?We would like to thank all you listeners out there for the continued support you have given the show. We hope to see you out and about as we hit more of the shows coming up this busy 2024 as well as at the Nats in Madison Wisconsin. If you happen to see us at a show, set up at our table come on over and say hello, we may even put you in front of the mic!  If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and of course email at:contact@modelgeekspodcast.com   Make sure you check out our group / community on Facebook and Discord:The ModelGeeks Model ShackThe ModelGeeks Discord Please check out the up coming Rocky Mountain Hobby Expo. If the text doesn't take you there then please follow this link: https://rockymtnhobbyexpo.com/Get on there and feel free to share your work! We want to see what's on your bench.We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USASprueBrothersDetail and ScaleLionHeart HobbyIf you're a ModelGeek go check out the following links! IPMS USA Events PageWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Support the Show.

Welcome to Episode 77 of The Modelgeeks Podcast!  In this episode, we kick off with  what we are in work on, what new items are out there, and what we have picked up lately. We discuss some new kits and accessories that we've seen lately, and El-Presidenté will tell us “What's New in 72!”.  Then Nemo, Frilldo, and Whitey provide a summary of Northern Virgina IPMS' Model Classic, while El-Presidenté gives us his impressions of his first AMPS Nationals at South Bend.We end with a discussion on what we believe are the best kits of some of our favorite modeling subjects.We would like to thank all you listeners out there for the continued support you have given the show. We hope to see you out and about as we hit more of the shows coming up this busy 2024 as well as at the Nats in Madison Wisconsin. If you happen to see us at a show, set up at our table come on over and say hello, we may even put you in front of the mic!   If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and of course email at:contact@modelgeekspodcast.com    Make sure you check out our group / community on Facebook and Discord: The ModelGeeks Model Shack The ModelGeeks Discord  Get on there and feel free to share your work! We want to see what's on your bench.We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USASprueBrothersDetail and ScaleLionHeart HobbyIf you're a ModelGeek go check out the following links!   IPMS USA Events PageThe Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Model Airplane Maker Support the showSupport the Show.

Welcome to Episode 76 of The Modelgeeks Podcast!  In this episode, we kick off with  what we are in work on, what new items are out there, and what we have picked up lately. D-ran and Whitey touch briefly of their recent trip up to MosquitoCon32 but for more on that go back and check out last weeks “off timeline” drop of the MosquitoCon32 Wrap Up show. El-Presidenté will tell us “What's New in 72!”, and we'll end with a discussion on what we think each of us can or would like to improve upon in each of our model building skillsets.We also had the opportunity to sit down and talk with Jefferey Garrity, THE RARE-PLANE DETECTIVE of Rare-Plane Detective hobby store…a repository, data base, and archive of hard-to-find model kits and aftermarket. If you're hitting a hobby show on the East Coast, West Coast, anywhere in between, and Parts Unknown, chances are Jeff and his sidekick Winston and helpful assistant Liz are going to be there in the vending area offering up all the HTF and even the latest kits at “Hobby Show Prices”! Take a look at their web-site and Facebook Page here: https://www.rare-planedetective.com/ https://www.facebook.com/profile.php?id=100057237146759&sk=photos_byWe would like to thank all you listeners out there for the continued support you have given the show. We hope to see you out and about as we hit more of the shows coming up this busy 2024 as well as at the Nats in Madison Wisconsin. If you happen to see us at a show, set up at our table come on over and say hello, we may even put you in front of the mic!  If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and of course email at:contact@modelgeekspodcast.com   Make sure you check out our group / community on Facebook:The ModelGeeks Model Shack Get on there and feel free to share your work! We want to see what's on your bench. We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USASprueBrothershttps://lionhearthobby.com/If you're a wicked ModelGeek go check out the following links!   IPMS USA Events PageButch O'Hare Modeling Club The Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Model Airplane Maker Support the show Support the show

Please join Whitey and Darrin on this special show wrap up episode of the "MosquitoCon 32" hosted by IPMS Wayne, NJ.   This show is the second Scale Model Show Season of the season in the IPMS Region Two area and is their 32nd consecutive.  We the privilege of having a couple of special guests join us at the table for a round of interviews that I am sure you will enjoy.So sit back and take a listen, as we discuss the show in general, talk about a little vacform and real space topics with Chris Derks and have a great discussion with Rob Riv of the Modeling Insanity Podcast. We would like to thank all you listeners out there for the continued support you have given the show. We hope to see you out and about as we hit some of the shows coming up this busy 2024. If you see us at a show, set up at our table come on over and say hello, we may even put you in front of the mic!If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email: contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook,The ModelGeeks Model Shack- Get on there and feel free to share your work! We want to see what's on your bench.We have also recently launched the ModelGeeks Discord.  You can pop over there. check things out!  The server can be found here:The ModelGeeks DiscordA very special shout out to our Patreon supporters, you all are all rockstars and we thank you for your support!!   If you would like to support the show then please check out the Patreon page here: The ModelGeeks Patreon  We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail & ScaleFurball Aero-DesignLionHeart HobbyTamiya USASprueBrothersAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageIPMS Nationals 2024We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out atScale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the showSupport the show

Welcome to Episode 75 of The Modelgeeks Podcast!  In this episode, the Modelgeeks, the Geeks will make their usual lap in the pattern and talk about new kits they acquired, and will discuss and debate the latest model news and new products and go over a few listener emails.  For the Geeks main discussion, the Geeks discuss what leads you to lose interest in a model and results in a model not getting finished.Darrin and El Presidente made the journey to Ontario Canada for HertageCon 16 and have a sit down with Andy Kline from Andy's  Hobby Headquarters and get him to spend some time with the Geeks and gives his take on the show and even makes an announcement while sitting with the Geeks.We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook, The ModelGeeks Model Shack www.nats2024 https://img1.wsimg.com/blobby/go/ac24d88a-08a8-47fe-961a-a53559fd3d36/IPMS-2024-Madison_Mission-Briefv2.pdf We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail and ScaleFurball Aero-DesignTamiya USASprueBrothersAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageButch O'Hare Modeling ClubThe Interesting Modeling CompanyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the showSupport the showSupport the show

Welcome to Episode 74 of The Modelgeeks Podcast!   In this episode, the Modelgeeks discuss the age old issue of "Negative Modeling.  What's our definition and how do we deal with it when it comes up? As usual we'll discuss what we're in work on, what new items are out there that we may have picked up. We would like to thank all you listeners out there for the continued support you have given the show. We hope to see you out and about as we hit some of the shows coming up this busy 2024. If you see us at a show, set up at our table come on over and say hello, we may even put you in front of the mic!If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email: contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook,The ModelGeeks Model Shack- Get on there and feel free to share your work! We want to see what's on your bench.We have also recently launched the ModelGeeks Discord.  You can pop over there. check things out!  The server can be found here:The ModelGeeks DiscordWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail & ScaleFurball Aero-DesignLionHeart HobbyTamiya USASprueBrothersAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageIPMS Nationals 2024We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out atScale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the showSupport the show

Welcome to Episode 73 of The Modelgeeks Podcast!   In this episode, the Modelgeeks reached out to you the listeners to find out what it is you guys wanted us to talk about.  I can tell you that the response was overwhelming!!  We took some of the ones that stood out to us and tossed them around for discussion.  As usual we'll discuss what we're in work on, what new items are out there that we may have picked up. We would like to thank all you listeners out there for the continued support you have given the show. We hope to see you out and about as we hit some of the shows coming up this busy 2024. If you see us at a show, set up at our table come on over and say hello, we may even put you in front of the mic!If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email: contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook,The ModelGeeks Model Shack- Get on there and feel free to share your work! We want to see what's on your bench.We have also recently launched the ModelGeeks Discord.  You can pop over there. check things out!  The server can be found here:The ModelGeeks DiscordWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail & ScaleFurball Aero-DesignLionHeart HobbyTamiya USASprueBrothersAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageIPMS Nationals 2024We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out atScale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the showSupport the show

Welcome to the special show wrap up of the "Old Dominion Open" hosted by IPMS Richmond in Richmond, Va.   This show marks the beginning of the Scale Model Show Season in IPMS Region Two and is always a special one for the Geeks.  We were very fortunate to have some special guests join us at the table for a round of interviews that I am sure you will enjoy.So sit back and take a listen, well discuss the show in general, discuss the show it's self with Richard Leininger (IPMS Richmond VP and Show Chair),  discuss upcoming releasees of Detail and Scale with Bert Kinzey and Rock Roszak and get a out of state perspective from both Rudy from LionHeart Hobby and Stephen Lee of "Sprue Pie With Frets" We would like to thank all you listeners out there for the continued support you have given the show. We hope to see you out and about as we hit some of the shows coming up this busy 2024. If you see us at a show, set up at our table come on over and say hello, we may even put you in front of the mic!If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email: contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook,The ModelGeeks Model Shack- Get on there and feel free to share your work! We want to see what's on your bench.We have also recently launched the ModelGeeks Discord.  You can pop over there. check things out!  The server can be found here:The ModelGeeks DiscordWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail & ScaleFurball Aero-DesignLionHeart HobbyTamiya USASprueBrothersAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageIPMS Nationals 2024We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out atScale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the showSupport the showSupport the show

Welcome to Episode 72 of The Modelgeeks Podcast!   In this episode, the Modelgeeks discuss what they are in work on, what new items are out there that they may have picked up, and generally what's going on in the hobby from the perspective of a bunch of primarily model airplane builders.Have you ever looked back at your past builds and thought to yourself; "I wish I could go back and give that one kit a complete redo."?  Well in this episode were going to do just that!  We each discuss, not only the kit we would like to rebuild but also discuss what kit or kits we would like to see re-tooled. We would like to thank all you listeners out there for the continued support you have given the show. We hope to see you out and about as we hit some of the shows coming up this busy 2024. If you see us at a show, set up at our table come on over and say hello, we may even put you in front of the mic!If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email: contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook,The ModelGeeks Model Shack- Get on there and feel free to share your work! We want to see what's on your bench.We have also recently launched the ModelGeeks Discord.  You can pop over there. check things out!  The server can be found here:The ModelGeeks DiscordWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail & ScaleFurball Aero-DesignLionHeart HobbyTamiya USASprueBrothersAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageIPMS Nationals 2024We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out atScale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the showSupport the show

Welcome to Episode 71 of The Modelgeeks Podcast!   In this episode, the Modelgeeks discuss what they are in work on, what new items are out there that they may have picked up, and generally what's going on in the hobby from the perspective of a bunch of primarily model airplane builders.For the main topic we sit down with Rudy and Danielle of LionHeart Hobby in Kyle TX for a talk about what motivated them to take the leap into opening a brick-and-mortar hobby store at a time when, at least in the U.S., such shops are on the decline. Hmmm, maybe they're on to something???We would like to thank all you listeners out there for the continued support you have given the show. We hope to see you out and about as we hit some of the shows coming up this busy 2024. If you see us at a show, set up at our table come on over and say hello, we may even put you in front of the mic!If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email: contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook, The ModelGeeks Model Shack- Get on there and feel free to share your work! We want to see what's on your bench. We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail & ScaleFurball Aero-DesignLionHeart HobbyTamiya USASprueBrothersAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageIPMS Nationals 2024We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsModel Airplane Maker Support the showSupport the show

Welcome to Episode 70 of The Modelgeeks Podcast!  In this episode, the Modelgeeks say what their model goals are for 2024. They will make their usual lap in the pattern and talk about new kits they acquired, and will discuss and debate the latest model news and new products.Frilldo and Nemo have a sit down with 2024 IPMS Nationals show chairman Jeff Herne and get him to talk about anything and everything NATS.  Jeff gives the listeners the latest info and gives his response to the Phase 1 hotel room block fiasco. We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.com Make sure you check out our new group / community on Facebook, The ModelGeeks Model Shackwww.nats2024https://img1.wsimg.com/blobby/go/ac24d88a-08a8-47fe-961a-a53559fd3d36/IPMS-2024-Madison_Mission-Briefv2.pdf We also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USASprueBrothers Also, if you're a real ModelGeek you'll check out the following links!IPMS USA Events Page Butch O'Hare Modeling Club The Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Model Airplane Maker Support the show

Welcome to the special episode of The Modelgeeks Podcast! In this Special Episode we bring you our first Model Podcast Roundtable.  It's our honor to introduce you to the "Producers".  Sit back and listen to each of the Producers as the discuss the inspiration behind their individual podcast as well as many other topics.Check out our local club, The Southern Maryland Scale modelers at the following link:https://somd-scalemodelers.club/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Furball Aero-DesignTamiya USALionheart HobbyAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageThe Interesting Modeling CompanyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the showSupport the show

Welcome to Episode 69 of The Modelgeeks Podcast!  In this episode, the Modelgeeks are joined by a special guests Gabe Pincelli and Justin Lentz. The Geeks discuss Gabe and Justin's process for how they do decals on their models and how they avoid Scotts dreaded “color shift”. The Geeks give a run-down of what they are working on as well as a review of some of the latest model news and new kits. Listener email is answered as well.  Join the Geeks for the last episode of Season 3! Don't worry, the Geeks will be back in January 2024 with Season 4 with a few new changes for our listeners and supporters.  Thanks to ALL of our sponsors and listeners and Pateron supporters for their support! So happy Holidays from the Geeks and get out there and build something! We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.com Make sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors: Detail and ScaleFurball Aero-DesignTamiya USASprueBrothers Also, if you're a real ModelGeek you'll check out the following links!IPMS USA Events Page Butch O'Hare Modeling Club The Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Model Airplane MakerSupport the show

Welcome to Episode 68 of The Modelgeeks Podcast! In this episode, dive into the topic of hobby and home life balance.  I don't know about you but it sucks the "MOJO" out of me! Unless you're retired you have the the whole "work" thing looming over you as well as those honey do lists!  Follow along as we discuss this very important balance.New tag, #anhouradayCheck out our local club, The Southern Maryland Scale modelers at the following link:https://somd-scalemodelers.club/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail and ScaleFurball Aero-DesignTamiya USAAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageButch O'Hare Modeling ClubThe Interesting Modeling CompanyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the showSupport the show

Welcome to Episode 67 of The Modelgeeks Podcast! In this episode, we have the honor of sitting down with Rob Booth, Secretary of IPMS.   There has been a lot of dram over the past year and a half and it's time to start focusing on the path forward.  Join us as we discuss the plans for a road map into the future!  Check out our local club, The Southern Maryland Scale modelers at the following link:https://somd-scalemodelers.club/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail and ScaleFurball Aero-DesignTamiya USAAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageButch O'Hare Modeling ClubThe Interesting Modeling CompanyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the showSupport the show

Welcome to Episode 66 of The Modelgeeks Podcast! In this episode, we will be breaking down and unpacking our first model show, PAXCON 2023.  It turned out to be an awesome weekend and the show exceeded our expectations in every way.Check out our local club, The Southern Maryland Scale modelers at the following link:https://somd-scalemodelers.club/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail and ScaleFurball Aero-DesignTamiya USASprueBrothersAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageButch O'Hare Modeling ClubThe Interesting Modeling CompanyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the showSupport the show

Welcome to Episode 65 of The Modelgeeks Podcast!  In this episode, the Modelgeeks are joined by a special guest Mr. John Colasante and he takes the geeks for a brief flyby of the world of 3-D printing.  The Geeks change things up and renamed “Whatcha working on” to “What's in you pattern”.  Join them as they give the latest on new kits and the latest info in the world of scale modeling.  The Geeks even treat the listeners to Frilldo struggling to close out the show leading to some good laughs.  Check out all the PAXCON 2023 information here at our club web site by clicking on the PAXCON 2023 tab. Here you can reserve a Club Display table, purchase an Awards Sponsorship, buy a Vendor table, and get the latest news on the show:https://somd-scalemodelers.club/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.com Make sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors: Detail and ScaleFurball Aero-DesignTamiya USASprueBrothers Also, if you're a real ModelGeek you'll check out the following links!IPMS USA Events Page Butch O'Hare Modeling Club The Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Model Airplane MakerSupport the show

Welcome to Episode 64 of The ModelGeeks Podcast!  In this episode, the Modelgeeks give their thoughts for the final time on the fallout from the San Marcos NATS.  Listen as the Geeks give their thoughts and solutions to some of the most polarizing issues with the national contest.  The geeks give a roundup of what is on their benches run through some listener email. The other geeks give Whitey the "business" as he was the only Geek not to make the Nats in San Marcos.Check out all the PAXCON 2023 information here at our club web site by clicking on the PAXCON 2023 tab. Here you can reserve a Club Display table, purchase an Awards Sponsorship, buy a Vendor table, and get the latest news on the show:https://somd-scalemodelers.club/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.com Make sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors: Detail and ScaleFurball Aero-DesignTamiya USASprueBrothers Also, if you're a real ModelGeek you'll check out the following links! IPMS USA Events Page Butch O'Hare Modeling Club The Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets Model Airplane MakerSupport the show

Welcome to Episode 63 of The ModelGeeks Podcast!We want this time to thank those that have made the ModelGeeks what it is today,   We have been fortunate to have met some of the great people and make some dear friends over the past three seasons, and want to this time to give you a big old ModelGeeks salute.Check out all the PAXCON 2023 information here at our club web site by clicking on the PAXCON 2023 tab. Here you can reserve a Club Display table, purchase an Awards Sponsorship, buy a Vendor table, and get the latest news on the show:https://somd-scalemodelers.club/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail and ScaleFurball Aero-DesignTamiya USASprueBrothersAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageButch O'Hare Modeling ClubThe Interesting Modeling CompanyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsModel Airplane MakerSupport the show Support the show

Welcome to Episode 62 of The ModelGeeks Podcast!We're back from the 2023 IPMS USA National Convention in San Marcos TX and it was certainly one to remember.   IPMS Alamo Squadron hit it our of the park this year! Join us as as El Presidente leads us through a recap our experience and hit the high (and a few low) spots from this years convention.Check out all the PAXCON 2023 information here at our club web site by clicking on the PAXCON 2023 tab. Here you can reserve a Club Display table, purchase an Awards Sponsorship, buy a Vendor table, and get the latest news on the show:https://somd-scalemodelers.club/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail and ScaleFurball Aero-DesignTamiya USASprueBrothersAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageButch O'Hare Modeling ClubThe Interesting Modeling CompanyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsModel Airplane Maker   Support the show Support the show

Welcome to Episode 61 of The ModelGeeks Podcast!We're dropping this episode a few days early because in this episode we talk about the upcoming…or ongoing 2023 IPMS USA National Convention in San Marcos TX! What are we bringing? What are we looking forward to? Who's going? Who's NOT going? (☹ Whitey…). What is the game plan for the MGPC? Settle into the driver's seat, keep your eye on the road, have a listen, and get there safely!We also discuss what we are In Work on, give you a brief of what's new out there in kits, aftermarket, upcoming shows, and other news around the hobby. We'd also like to formally welcome el Presidente', Tim Holland, as a permanent member of the MGPC! After sitting in on Substitute Duty for several episodes, the feedback from listers has been very positive about what Tim brings to the conversation. Once again Tim gives us the “1/72 Run-Down” as well as the latest on our upcoming inaugural club contest and show, “PAXCON 2023”, coming up this October the 7th! Check out all the PAXCON 2023 information here at our club web site by clicking on the PAXCON 2023 tab. Here you can reserve a Club Display table, purchase an Awards Sponsorship, buy a Vendor table, and get the latest news on the show:https://somd-scalemodelers.club/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows or if you decide to come visit ours in October. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.com Make sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors: Detail and ScaleFurball Aero-DesignTamiya USASprueBrothersBases By BillAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events Page Butch O'Hare Modeling Club The Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with FretsModel Airplane Maker   Support the show Support the show

Welcome to Episode 60 of The ModelGeeks Podcast! 60??? Are you freaking kidding me?Look like we're a man down this episode.  Yes, that was in the last episodes show notes but this time we're missing Frildo as he's on vacation with the Fam! So we welcome Tim Holland, AKA: El Presidente back to the mic! We have done episodes in the past discussing the stash and tackling the subject of "size matters".  Well in this episode we're going to give it a little twist! Tim gives the latest on our upcoming inaugural club contest and show “PAXCON 2023” coming this October 7th! We better get busy!If you are going to be in the Southern Maryland area in October, come check out our inaugural show, PAXCON 23.  Click the link below to find out more information or if you would like to sponsor a trophy package or just to donate to our show.https://somd-scalemodelers.club/paxcon-2023/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail and ScaleFurball Aero-DesignTamiya USASprueBrothersBases By BillAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageIPMS Nationals 2022Butch O'Hare Modeling ClubThe Interesting Modeling CompanyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsIf you would like to support the Geeks please take a moment to head over to our new The ModelGeeks Patreon.  If you aren't interested in Patreon and would still like to donate, then please follow the link.  Support the Geeks!If you aren't interested in Patreon and would still like to donate, then please follow the link.  Support the Geeks! Support the show

Welcome to Episode 59 of The ModelGeeks Podcast!Look like we're a man down this episode.  Nemo is on the road again supporting the "work" load in the real world so we welcome Tim Holland, AKA: El Presidente back to the mic! We are pleased to have the Crew from Bases By Bill join us for sit down interview.  We discuss the geneses behind the company, discover some new products and future, to include NATS this year.   Tim gives the latest on our upcoming inaugural club contest and show “PAXCON 2023” coming this October 7th! We better get busy!If you are going to be in the Southern Maryland area in October, come check out our inaugural show, PAXCON 23.  Click the link below to find out more information or if you would like to sponsor a trophy package or just to donate to our show.https://somd-scalemodelers.club/paxcon-2023/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail and ScaleFurball Aero-DesignTamiya USASprueBrothersBases By BillAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageIPMS Nationals 2022Butch O'Hare Modeling ClubThe Interesting Modeling CompanyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsIf you would like to support the Geeks please take a moment to head over to our new The ModelGeeks Patreon.  If you aren't interested in Patreon and would still like to donate, then please follow the link.  Support the Geeks!If you aren't interested in Patreon and would still like to donate, then please follow the link.  Support the Geeks! Support the showSupport the show

Welcome to Episode 58 of The ModelGeeks Podcast!In this episode we talk about How to keep the hobby just that a hobby.  The geeks look at different ways to keep it a hobby by laughing at yourself and not sweating tiny 1/72 power levers for a Ki-84 Frank! The geeks also mention how having a friends text group is also a plus.We also discuss what we are In Work on, give you a brief of what's new out there in kits, aftermarket, upcoming shows, and other news around the hobby. Once again, we have our special guest host in studio Tim Holland, President of our club Southern Maryland Scale Modelers. Tim gives us the “1/72 Run-Down” as well as the latest on our upcoming inaugural club contest and show “PAXCON 2023” coming this October 7th! We better get busy!If you are going to be in the Southern Maryland area in October, come check out our inaugural show, PAXCON 23.  Click the link below to find out more information or if you would like to sponsor a trophy package or just to donate to our show.https://somd-scalemodelers.club/paxcon-2023/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.com Make sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors: Detail and ScaleFurball Aero-DesignTamiya USASprueBrothersBases By BillAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events Page IPMS Nationals 2022 Butch O'Hare Modeling Club The Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets If you would like to support the Geeks please take a moment to head over to our new The ModelGeeks Patreon.  If you aren't interested in Patreon and would still like to donate, then please follow the link.  Support the Geeks! If you aren't interested in Patreon and would still like to donate, then please follow the link.  Support the Geeks! Support the show

Welcome to Episode 57 of The ModelGeeks Podcast!In this episode we that super sexy natural metal finish and maybe a few technics on how to achieve it!  WAIT!!  We will also welcome old D-Ran back form the land down under!!We also discuss what we are In Work on, give you a brief of what's new out there in kits, aftermarket, upcoming shows,  as well as discuss some of the news with in the hobby.  Not that there has been anything super news worthy out there after all, it has been kind of quiet.Once again, we have our special guest host in studio Tim Holland, President of our club Southern Maryland Scale Modelers with his “1/72 Run-Down”.  If you are going to be in the Southern Maryland area in October, come check out our inaugural show, PAXCON 23.  Click the link below to find out more information or if you would like to sponsor a trophy package or just to donate to our show.PAXCON 2023We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.comMake sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors:Detail and ScaleFurball Aero-DesignTamiya USASprueBrothersBases By BillAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events PageIPMS Nationals 2022Butch O'Hare Modeling ClubThe Interesting Modeling CompanyWe are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit BoxSprue Pie with FretsIf you would like to support the Geeks please take a moment to head over to our new The ModelGeeks Patreon.  If you aren't interested in Patreon and would still like to donate, then please follow the link.  Support the Geeks!If you aren't interested in Patreon and would still like to donate, then please follow the link.  Support the Geeks!  Support the showSupport the show

Welcome to Episode 56 of The ModelGeeks Podcast!In this episode we talk about what inspires us to build what we build, and all aspects of that thing that gets us to the bench to put thoughts into action, a vision into a creation, an idea into something that can be shared…or just to make something cool!We also discuss what we are In Work on, give you a brief of what's new out there in kits, aftermarket, upcoming shows, and other news around the hobby. Once again, we have our special guest host in studio Tim Holland, President of our club Southern Maryland Scale Modelers. Tim gives us the “1/72 Run-Down” as well as the latest on our upcoming inaugural club contest and show “PAXCON 2023” coming this October 7th! We better get busy!If you are going to be in the Southern Maryland area in October, come check out our inaugural show, PAXCON 23.  Click the link below to find out more information or if you would like to sponsor a trophy package or just to donate to our show.https://somd-scalemodelers.club/paxcon-2023/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.com Make sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors: Detail and ScaleFurball Aero-DesignTamiya USASprueBrothersBases By BillAlso, if you're a real ModelGeek you'll check out the following links!IPMS USA Events Page IPMS Nationals 2022 Butch O'Hare Modeling Club The Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets If you would like to support the Geeks please take a moment to head over to our new The ModelGeeks Patreon.  If you aren't interested in Patreon and would still like to donate, then please follow the link.  Support the Geeks! If you aren't interested in Patreon and would still like to donate, then please follow the link.  Support the Geeks!  Support the showSupport the show

Welcome to Episode 55 of The ModelGeeks Podcast. The “Double Nickel” El Presidente joins us for the “Double Nickel” episode, filling in for D-ran who had some work commitments.  El Presidente gives the listeners a 72-scale new kit run down for our 72 scale friends. Of course, we'll also discuss what we are In Work on, give you a run-down of what's new out there in kits, aftermarket, upcoming shows, and other news around the hobby. In the main topic, the geeks explain what is their most dreaded part of a build.  The answers will surprise you!If you are going to be in the Southern Maryland area in October, come check out our inaugural show, PAXCON 23.  Click the link below to find out more information or if you would like to sponsor a trophy package or just to donate to our show.https://somd-scalemodelers.club/paxcon-2023/We would like to thank all the listeners for the continued support you have given the show. We hope to see you out and about as we hit some of the shows. If you can't make it to the shows then you can still interact with us through social media, Facebook, Instagram, and email:  contact@modelgeekspodcast.com Make sure you check out our new group / community on Facebook, The ModelGeeks Model ShackWe also want to thank each of our sponsors for their support. We are very lucky to have their support. When you have the time, pay a visit to their web sites, and have a look at their fine products.Sponsors: Detail and ScaleFurball Aero-DesignTamiya USASprueBrothersBases By BillAlso, if you're a real ModelGeek you'll check out the following links! IPMS USA Events Page IPMS Nationals 2022 Butch O'Hare Modeling Club The Interesting Modeling Company We are very fortunate to be able to join the scale modeling podcast community and are in the company of several other really GREAT podcasts. Hopefully, someday we'll earn our wings and be able to keep up with those guys!  Please check them all out at Scale Model Podcasts.Blogs:The Kit Box Sprue Pie with Frets If you would like to support the Geeks please take a moment to head over to our new The ModelGeeks Patreon.  If you aren't interested in Patreon and would still like to donate, then please follow the link.  Support the Geeks! If you aren't interested in Patreon and would still like to donate, then please follow the link.  Support the Geeks!  Support the showSupport the showSupport the show