POPULARITY
How important is the bevel angle of your bench plane? Is 27 degrees better 24 degrees? The answer may surprise you! Also, last minute tips for filing your taxes...... RecommendationsWood Database https://www.wood-database.com/Lie-Nielsen https://www.lie-nielsen.com/nodes/4219/home-education-getting-started#:~:text=On%20bevel%20up%20blades%2C%20the,is%20set%20in%20the%20tool.Sharpening Supplies https://www.sharpeningsupplies.com/Tips-for-Selecting-the-Right-Bevel-Angle-W44C60.aspxUS Forest Service https://www.fs.usda.gov/t-d/pubs/pdfpubs/pdf18232812P/Part08_Sharpening.pdfSpecial Thanks to Listeners InChicago, IllinoisMünchen, Bayern, Deutschlandone listener in Barbados!Support The Show On: Buy Me A Coffee: https://www.buymeacoffee.com/workatwoodwork Donate Directly: https://www.workingatwoodworking.com/support.phpCoaching: https://www.workingatwoodworking.com/coaching.php Youtube Channel: https://www.youtube.com/@workingatwoodworking Sound effects from: http://www.freesfx.co.uk Working At Woodworking Podcast hopes to encourage and provide information to amateur woodworkers who dream about turning their hobby into a full-time or part-time business, and to help current business owners succeed. Business coaching is available at very reasonable rates.Support the showContact Me: https://www.workingatwoodworking.comSupport This Podcast: Buy Me A Coffee: https://www.buymeacoffee.com/workatwoodwork
Er det et godt tidspunkt at købe en bolig? Hvad er det lige realkreditobligation er? Og hvorfor går kursen op og renten falder? Det er nogle af de spørgsmål, som du kan få besvaret én gang for alle (forhåbentlig), når Kapitalisterne får besøg af boligøkonom, chefanalytiker og ekspert fra Hammerslag, Mira Lie Nielsen
Modern Woodworkers Association Podcast - Conversations Among Woodworkers
Rick returns to answer to the 5 Questions. We have a lively conversation about Veritas vs. Lie-Nielsen, sharpening, Greene & Greene furniture - plus a little college football. Check it out! Rick de Roque: @rick4212 on InstagramMWA Podcast - Patreon Page@mwa_podcast on Instagram
Del2: Henrik Lie-Nielsen har intet mindre enn 42 roller i proff.no.Han gründet Reaktor i 1995, som ble solgt til Knowit 2010. Han etablerte Bookeeper 2011, som nå er børsnotert. Han har vært med å etablere Tripod, som er et investorkollektiv med base på Vestlandet. Han har investert i en rekke oppstartsselskaper og scaleups.Dette har han lært. Programleder: Lucas Weldeghebriel, journalist og gründer i Shifter.Støtt Shifter og bli abonnent her, slik at vi fortsatt kan holde denne podcasten gratis. Hosted on Acast. See acast.com/privacy for more information.
Del1: Henrik Lie-Nielsen har intet mindre enn 42 roller i proff.no.Han gründet Reaktor i 1995, som ble solgt til Knowit 2010. Han etablerte Bookeeper 2011, som nå er børsnotert. Han har vært med å etablere Tripod, som er et investorkollektiv med base på Vestlandet. Han har investert i en rekke oppstartsselskaper og scaleups.I dag driver han investeringsselskapet Amp Eleven ( www.amp11.no ).Dette har han lært.Programleder: Lucas Weldeghebriel, journalist og gründer i Shifter.Støtt Shifter og bli abonnent her, slik at vi fortsatt kan holde denne podcasten gratis. Hosted on Acast. See acast.com/privacy for more information.
Support us on Patreon: https://www.patreon.com/woodshoplife Sponsored by 3M Xtract Huy 1)I recently got a new 12x16 shed and am planning on shifting all of my woodworking tools out of the multi purpose garage and creating more of a dedicated shop space. I may have more questions on that in the future but for now I'll start with a simple one. I have a few different battery tool platforms and I know it's bad for the long term battery life to expose the batteries to lots of temperature and climate changes. As a result I have all of my batteries and chargers in our laundry room for now. I ( and my wife) would prefer to store these in the shop but I'd rather not sacrifice the batteries well being if I don't have to. I know yalls workshop space is climate controlled so you probably don't have this issue. But I wanted yalls thoughts/opinions on the issue in general. Would making some kind of insulated storage cabinet be worth trying. Or is that just poppycock. Ha. For reference I live in NC so the winters occasionally get down to the teens and the summers often the 90s. Thanks for all you guys do. Respectfully, Jon 2) I have been practicing cutting dovetails by hand because I'm silly Using the Veritas dovetail saw I'm pretty sloppy But using a Veritas rip carcass saw I'm pretty on point Is it possible my big rock biter hands are better suited to a larger saw and that offers a better advantage to my end result, than the specific size and toothing of the dovetail saw? These used to be such big strong hands. I know a girl who dated Atreyu from Never Ending Story. Apparently, very short. But I digress. Thank you for any insights before I drop some serious change on Bad Axe or Lie Nielsen saws. These Veritas saws are all from the annual scratch and dent sale. Which is why I have a rip carcass saw oops. I guess I should also say that my other thought was that the Veritas saws are too light and that's why I'm having a problem with the really small dovetail saw it has no mass. Tom 3) Thanks for making ‘Woodshop Life Podcast' part of my life! It's a great mix of styles, knowledge and a little snark - from Guy's aged wisdom. My question takes off from the last podcast, and the ending talk on an eco-friendly woodshop. I work primarily with reclaimed woods, being involved in that part of the industry since the late 1990's, so was caught by the subjects lead in the podcast No. 103 marquee. I wasn't disappointed or surprised that reclaimed woods did not make it onto any of the short lists - though Sean did trail off the session with “and like the wood - recycle it” - though I imagine that it referred to using shop scraps, but possibly other types of salvaged wood material. So my questions is mostly an open ended one on any experience that you all may have in using reclaimed material - or why it can provoke different reactions among woodworkers, whether used for it's original or rustic surfaces or resurfaced?. Huy, working in Alabama, must come across some antique pine, though I think he mentioned taking a pass on its uneven grain and amber tone. We've sent regular tractor trailer loads of this salvaged old growth material to Alabama - or maybe back to Alabama, as it covered large parts of the state until the mid-1800's. My perspective on availability can be off, as there's a lot of the old buildings here in New York City framed with the old softwoods. The longleaf pine is getting harder and more competitive to acquire, but there's often the Northern softwoods - like less desirable spruce, hemlock and fir, but still old growth in quality. along with the signs that are witness to it's history - nail holes, stress cracks, aged surfaces, etc. And even if it's among the local woods available, the mix of species, sources and not least, embedded nails can cause woodworkers to barricade the shop doors. Also - myself and my business partner Klaas Armster, put out a book a short while back ‘Reclaimed Wood: A Field Guide'. We'd be happy to send along a copy and/or some boards of salvaged wood (dry and de-nailed). Thanks again for reclaiming the tradition of woodworking in America - the craft itself seems at the heart of an eco-friendly workshop, despite any type wood that is used. Alan Guy 1) Hi Guys, I want to start by saying that you all Rock. I listen to a few woodworking pod casts and yours is the best at passing along knowledge. Thank you for helping all of us out with your insights on wood working. I am very new to this hobby and am in the process of building my wife a cabinet. It will be used for holding potato's and onions and a few other things that clutter our kitchen up. My question has to do with the glue up for the top of the cabinet. I am glueing 3pieces of 3/4 cherry together to make the top and I am concerned about it ending up flat. I am wondering if I should use dowels to help with this. I am thinking about buying a dowel jig from rockler and want to know if this is worth it or should I try a different technique. I would like a good jig but do not want to break the bank because it will not be used too often. Also, what type of finish would be good for cherry. I am thinking some stain and then a poly. Thanks again, Cory 2) Hey guys, Jared from Houston here. Really appreciate the podcast! I'm making a wall-hanging cabinet intended to store a couple whiskey bottles and glasses. The cabinet will be solid cherry with one door and maybe a drawer on the bottom. I'm moderately experienced with wood but woefully beginner with finishes. I typically would finish with shellac only and wipe down with steel wool to a matte finish. However, due to the likelihood of contact with alcohol, I believe another approach might be wiser. My favorite idea right now is to put two coats of shellac then follow with a coat of spray can lacquer. What do you guys recommend? Also, to what grit do you sand before applying your first coat of finish? Last consideration on these questions...I'll be donating this to auction at a local school fundraiser and do not want to get called for finish repairs down the road! Thanks for any advice you can offer! Jared 3) Hello guys (and guy), thank you for delivering an awesome podcast! I know this topic is taboo, but I was wondering what y'all's thoughts were on veneering one side of a panel when it is already in its frame. I am planning on building a tool cabinet (loosely inspected by FWW Mike Pekovich tool cabinet) the door in question would be a traditional frame and panel door with a 1/2” plywood panel set into a 1/4” groove. The back of the door has a case style frame attached to the back to give the hinged door some depth to house tools. The reason I am wanting to only veneer one side is due to lack of material, (the door frame will be made of mesquite, and the panel shop sawn veneer out of spalted hackberry) I know I could veneer the back with another material but I am also trying to save on weight/ thickness of the panel. Hopefully y'all will have some advice / experience on this topic. I am planning on doing this project in about 6 months. Thanks in advance, Josh
In this episode I'll be chatting with Kirsten Lie-Nielsen of the Hostile Valley Living Homestead. Kirsten and her family live on a 200-year-old homestead in Maine. She raises geese, goats, and focuses on using permaculture and agricultural practices in her lifestyle. Kirsten, is also a homesteading author and educator. In addition to two books on homesteading, she hosts classes, and offers special educational resources for those interested in this lifestyle. In this episode I talk with Kirsten about what she does and how she got there.If you'd like to find out more about Kirsten, go check out her youtube channel, website, books, and instagram at, Hostile Valley Living Instagram Hostile Valley Living Website Hostile Valley Living Youtube
Find Kirsten Lie-Nielsen also on:WebsiteInstagramYouTube
Huse bliver handlet for 12% mere, end de gjorde i marts sidste år, mens ejerlejligheder er steget med 14%. Det er den højeste årlige prisstigning siden 2010. Men nu spår Nykredit, at priserne lejligheder i landets større byer kommer til at dykke 5-10%. Derudover kommer boligskatterne til at stige. Camilla Michelle tager en snak med boligøkonom og Chefstrateg hos Nykredit, Mira Lie Nielsen om, hvordan man skal forholde sig til markedet lige nu.
A question recently posed on a forum - "Where have all the planes gone?" was important enough to me that I thought I would reach out to Thomas Lie-Nielsen and see if he could shed some light on the challenges that they are facing as a result of Coivd-19.
Is it even possible in our age of convenience to give it all up and work towards living off the land? Homesteader, a term used nowadays to define anyone on a greater quest for self-sufficiency. Like our ancestors before us, returning to a way of life where most of what you consume you make, grow, raise, and hunt yourself. A child of original bank-to-the-landers, Kirsten Lie-Nielsen was raised on a rural homestead. But, like any rebellious teenager, she yearned for the bright lights and excitement of the city. Yet, once she got there she realized quickly that she was being beckoned back to a quieter life in Maine. This week we are joined by writer and homesteader Kirsten Lie-Nielsen of Hostile Valley Living. Kirsten and her partner Patrick spent years restoring a 200 year-old farm that had been abandoned for 20 years. Since moving, Kirsten has written two books on homesteading. In our conversation, she discusses why she chose to raise pigs, geese, and goats, why Maine is a great state for homesteaders, and the creative ways she is piecing together a living working almost entirely off of her small farm. urbanexodus.cominstagram.com/theurbanexodusfacebook.com/theurbanexodus
In this episode you'll meet Kirsten Lie-Nielsen, of Hostile Valley Living! She goes in depth about renovating her 200 year old farm, Maine living, and using animals for permaculture land management. She was a real treat, you won't want to miss this!
John Lie-Nielsen is the Founder and CEO of One Park Financial. The company's mission is to help small to mid-sized businesses get access to working capital, both quickly and efficiently. They help customers for the long haul, growing business with customer-centric services to make it all happen. It is a business dedicated to helping other businesses gain access to working capital just like the big guys. They help get time, credit and paperwork all on your side. John is an entrepreneur specializing in launching and developing financial service firms. In 1999, he founded ACA financial LLC and in 2010, he founded his current company, One Park Financial. Hisbusiness has since been named as one of the best entrepreneurial companies in America and have been featured in Entrepreneur Magazine's Entrepreneur 360 list more than once. In this episode of Smart Business Revolution, Julie Musgrave interviews John Lie-Nielsen, Founder and CEO of One Park Financial, about providing financing and support to small businesses during and after a crisis. John also talks about why he founded his company, the government's relief programs for businesses, and his advice to fellow business owners on starting and growing a business and how they can best manage their employees. The post John Lie-Nielsen | Jumping into Business in the Midst of Chaos appeared first on Smart Business Revolution.
Kirsten Lie-Nielsen is a homesteader and writer living in Maine. She raises geese, goats and writes books. In this episode, I sat down with Kirsten to learn more about her story. LINKS Hostile Valley Farm Instagram Hostile Valley Farm Website ABOUT GOLD SHAW FARM YouTube: http://www.youtube.com/goldshawfarm Web: http://www.goldshawfarm.com Facebook: http://www.facebook.com/goldshawfarm Instagram: http://www.instagram.com/goldshawfarm Twitter: http://www.twitter.com/goldshawfarm Send us mail: Gold Shaw Farm PO Box 225 Peacham, VT 05862
Support us on Patreon: https://www.patreon.com/woodshoplife Guys Questions 1) I’m having trouble getting clean 45 degree angles (or any angle other than 90) on my table saw. I use an Incra Miter 1000. It seems like my workpiece shifts ever so slightly as the wood enters the blade and my miter isn’t clean. I don’t have confidence in the miter stop provided with the miter gauge cause it’s just a small round piece of metal. Any tips on cutting angles with this style miter gauge would be awesome. Also, do you recommend using it on the left or right miter slot of a left tilting blade. Much appreciated. Keep up the good work. -Zach 2) I just got my first Lie-Nielsen plane (#4 bronze body smoother). I've decided it's time to up my sharpening game and purchase some quality stones to sharpen plane irons and chisels. I had pretty much decided on Shapton Waterstones when I ran across their glass stones. The glass stones now seem to be the way to go but I'd like to have your guys take on glass vs. water stones before I pull the trigger. Love the show guys! Thanks and Merry Christmas! - Jeff Sean's Questions 1) Hello guys, big fan of the podcast, I've listened to all your episodes and look forward to each one. I enjoy the Q&A format. My question is about a workbench I want to build, more specifically the top. I have no formal workbench right now so I'm looking to build my first. I was initially looking to source some butcher block top and use that but last year I acquired a full 4x8 sheet of 1-1/4" MDF leftover from a jobsite. I had to rip it down and cut it down to make it manageable enough to get it in my car so I have 2 5'x2' pieces of 1-1/4" MDF. I was planning on laminating these 2 pieces together to get a 5' X 2' X 2-1/2" thick benchtop. I'm wondering what if any issues I may encounter and any tips for gluing up, attaching a vise, etc. I was going to drill dog holes but I recently saw a video from Dave Piccuito at https://youtu.be/DYIwSm2wnAA where he puts in a t-track. I really like how his turned out and was thinking about doing that. So I was just hoping to get some insight into anything I may want to look out for or be aware of. Pros/cons/thoughts. Thanks for everything you do guys, take care. - Michael 2) On a recent episode, you talked about using your CNC's to cut out jigs, etc. I'm interested in getting a CNC to complement my woodworking, which is a fairly new hobby for me since I retired a couple of years ago. My only real interest is in using it to make jig parts and router templates for things like furniture legs - not interested in creating final products or 3D sculptures with the CNC, nor doing production for products to sale. What are your recommendations (size, features, manufacturers) for a setup that would see light duty limited to this application? I've tried some of the online laser-cutting services - but they can get pricey pretty quick and have limited thicknesses, so I'm interested in my own setup. Price is a big consideration - as I can't see spending 5 grand for such a limited application. Thanks, Scott Huy's Questions 1) I started woodworking last year, and I've only been using jatoba, African mahogany, hickory, and hard maple. Mostly because I got good deals on Craigslist. Based on what I've heard you guys discussing, those might not be the easiest woods to work with. My next project is to make a bed for my 4 year old son. What species would make my life easier? I'm in Denver, so cherry isn't all that cheap. Also, any tips on making beds? -aaron 2) I have a commission for a 6’ round 12/4 (poplar but it doesn’t matter) dining table. I’ll fabricate the steel base, but how would you move such a massive piece around the shop? And any recommendations on the glue up? Guy, how do you move your large pieces at the new shop? Thanks gentlemen! Will Thanks to Maverick Abrasives for sponsoring this episode!
We announce the Woodworkers Fighting Cancer build, new WFC auctions and lots of woodworking questions!
Henrik Lie-Nielsen er tross sin relativt unge alder nærmest en legende i det norske tekonologimiljøet. Han er i dag gründer og investor, og er involvert i mange spennende selskap innen fintech-sektoren, som STACC, Kravia og New & Company. Vi snakker om hva som er essensielt dersom en skape verdi ved bruk av teknologi, enten det er for eksisterende selskaper eller i startups. See acast.com/privacy for privacy and opt-out information.
Question 1: From Chase: I have an old 13" hitachi planer I got from craigslist many years ago. It has served me well but is starting to have issues. 13 inches has been useful, but at times I wish it was wider. In your experience is it worth the extra money to buy something bigger, or should I stick with a more reasonable choice like DW735? I have 220v access and floor space, so that isn't an issue. I am in my 30s, have been woodworking for ~10 years. I would like to keep woodworking into my 80s, so I can justify a longer term investment. I can afford a 1.5 or 2k tool, but could buy something else if I stuck with a cheaper planer. Segemented Cutterheads Change the Game Question 2: From Martin: I know Mike likes to have a small offset between the rails and stiles of his frame-and-panel doors. But how does he then avoid chipping the unsupported inside corners of the stiles when planing the top and bottom of the door to fit the opening? How to Fit an Inset Door - Systematic approach yields perfect results every time Install Inset Doors With Ease - Four-step process uses the jointer and tablesaw to guarantee a perfect fit Segment: All Time Favorite Tool of All Time Barry: SketchUp How To Create New SketchUp Textures For Your Models Mike: Suizan Japanese Saws and DFM Dowel Plate Japanese Sew Overview with Andrea Hunter Ben: Shopmade Hot Pipe Bender Video: Hot Pipe Bender Question 3: From RobGoSlow on YouTube: I'm not sure where to submit questions for the podcast but I have one: I'm a very new wood worker with a lower end contractor table saw. Obviously things like the blade angle and fence are not very precise but I want to know what sources of error are there to look out for? What are the types of error you're concerned about with a cheap table saw? Portable Saws Question 4: From Capt. Zachary J. Daniels: I want to buy a block plane from Lie-Nielsen. I know Mike is a fan of the adjustable mouth block plane. However, I also remember Mike and Matt Kenney having a spirited debate where Matt was extolling the virtues of the rabbeting block plane. I can’t seem to find the original discussion between Matt and Mike. Instead of listening to the entire catalog again, (and without Matt around to defend himself) I’m interested to hear Mike’s opinion on why he prefers the adjustable mouth block plane over the rabbeting block plane. Right now, I only want to buy one block plane as I also have my eye on the No. 62 low angle jack. Thanks for the show and keep up the great work! I became an unlimited member after listening to several of the podcasts, so keep the content coming and inspiring others! Rabbet Planes Are Real Shop Workhorses The Best Way to Fit Tenons Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.
Question 1: From Chase: I have an old 13" hitachi planer I got from craigslist many years ago. It has served me well but is starting to have issues. 13 inches has been useful, but at times I wish it was wider. In your experience is it worth the extra money to buy something bigger, or should I stick with a more reasonable choice like DW735? I have 220v access and floor space, so that isn't an issue. I am in my 30s, have been woodworking for ~10 years. I would like to keep woodworking into my 80s, so I can justify a longer term investment. I can afford a 1.5 or 2k tool, but could buy something else if I stuck with a cheaper planer. Segemented Cutterheads Change the Game Question 2: From Martin: I know Mike likes to have a small offset between the rails and stiles of his frame-and-panel doors. But how does he then avoid chipping the unsupported inside corners of the stiles when planing the top and bottom of the door to fit the opening? How to Fit an Inset Door - Systematic approach yields perfect results every time Install Inset Doors With Ease - Four-step process uses the jointer and tablesaw to guarantee a perfect fit Segment: All Time Favorite Tool of All Time Barry: SketchUp How To Create New SketchUp Textures For Your Models Mike: Suizan Japanese Saws and DFM Dowel Plate Japanese Sew Overview with Andrea Hunter Ben: Shopmade Hot Pipe Bender Video: Hot Pipe Bender Question 3: From RobGoSlow on YouTube: I'm not sure where to submit questions for the podcast but I have one: I'm a very new wood worker with a lower end contractor table saw. Obviously things like the blade angle and fence are not very precise but I want to know what sources of error are there to look out for? What are the types of error you're concerned about with a cheap table saw? Portable Saws Question 4: From Capt. Zachary J. Daniels: I want to buy a block plane from Lie-Nielsen. I know Mike is a fan of the adjustable mouth block plane. However, I also remember Mike and Matt Kenney having a spirited debate where Matt was extolling the virtues of the rabbeting block plane. I can’t seem to find the original discussion between Matt and Mike. Instead of listening to the entire catalog again, (and without Matt around to defend himself) I’m interested to hear Mike’s opinion on why he prefers the adjustable mouth block plane over the rabbeting block plane. Right now, I only want to buy one block plane as I also have my eye on the No. 62 low angle jack. Thanks for the show and keep up the great work! I became an unlimited member after listening to several of the podcasts, so keep the content coming and inspiring others! Rabbet Planes Are Real Shop Workhorses The Best Way to Fit Tenons Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.
In this episode Matt & Joe go over what goes into cutting dovetails - Matt’s method, how Joe wasn’t ready with sharp tools to cut his. We also touch on making mistakes and how to recover from them.What we’ve been up to…Matt was at [https://www.petersvalley.org/](https://www.petersvalley.org/) last week and is heading to Maine to for a class at Lie-Nielsen this weekend to teach kumiko - [https://www.lie-nielsen.com/](https://www.lie-nielsen.com/)Joe took vacation and put in a walkway.* Cutting Dovetails* Mistakes and how to recover from them* Randy Dingle makes an appearance again* Letterkenny on Hulu* Joe takes a rip at this week’s 3 things to know… About putting in a walkway* Stat of the podcast* A joke about cowsWhat we drank - [https://www.brassworksbrewing.com/](https://www.brassworksbrewing.com/)
Donate to The Permaculture Podcast Online: via PayPal Venmo: @permaculturepodcast In this episode, Kirsten Lie-Nielsen, author of So You Want to be a Modern Homesteader, joins me to share her journey in becoming a modern homesteader and the advice she has for anyone interested in pursuing a similar path. Residing in Maine, I like her story because of how she and her partner had this dream and began on the land they were on. Continuing to develop their skills, in a space that was definitely not a farm, they spent this time seeking out the right piece of property for their goals. Through our chat together Kirsten shares what and why she and her husband focused on when moving to the land. That she earns an income off the farm, and what they are developing to make one on it. The value of a partner who shares your dream, which she has in her husband. The relationship we have with our animals, including what develops from bottle feeding a baby goat, when your geese imprint on you and having a guardian dog as part of your family. Engaging your local community, while also leveraging social media to stay connected, learn new skills, and promote your farm and farm business. We get into quite a bit in our time together, which also reminded me of how technology is not always the most reliable at the end of a rural lane. You'll hear a few places where we have less than perfect audio, but those are minor compared to the wealth of information Kirsten shares with us in this conversation. You can read Kirsten's blog and learn more about her journey at HostileValleyLiving.com, and you'll find her book at newsociety.com. In cooperation with New Society Publishers, I'm giving away a copy of her book to a listener on Patreon. For those of you who support the podcast there, you'll find this in your feed beginning February 18th. Not a Patreon supporter? That's okay, this drawing is open to everyone. All you need to do is register with Patreon and leave a comment in the link below. This giveaway only runs through February 28th, so head over there today. Book Giveaway: So You Want To Be A Modern Homesteader While lauding Kirsten's book, I mention that I like the questions she asks to help you perform a self-assessment and decide whether or not this really is the path you want to pursue, something we don't talk about enough within the permaculture community. Those questions can help you with preparing for rural life, understanding the seasonality of living on a farm, the reality of raising children on the homestead, and more. A few of those questions, from the chapter on Skills and Resources for Rural Living, include: What is your plan for keeping food fresh or preserved? How will you bathe and get fresh drinking water? How will you keep your animals warm in winter? As you read each chapter and answer those questions, if you want to learn more and dig deeper, Kirsten provides a relatively comprehensive list of books for each topic. From the same chapter, some of the books she recommends: The Encyclopedia of Country Living by Carla Emery Raising Goats Naturally by Deborah Niemann I'm a fan of her suggested reading because many of the books are ones I would personally recommend from my own library, or have been suggested by guests at one point or another. Overall, if you are called to the land, you can learn a lot from Kirsten, her blog, and her books. I missed her at Mother Earth News Fair in PA this past year, as I was hanging out with Jereme Zimmerman at the time talking mead, but look forward to meeting her this September and sitting through some of her presentations. If you can make it to that or any of the other events, she'll be at, seek out the opportunity. If not, read her work. After listening to this episode, what do you think about making a move to a homestead? Have Kirsten's insights changed your views? Will you need to take some time to build your skills? Let me know. Email: The Permaculture Podcast Or if you still like to seal an envelope and mail a letter, that address is: The Permaculture Podcast The Permaculture Podcast From here, the next episode is a conversation with Zev Friedman of Co-operate WNC as we sit down to talk about mutual aid and the scale of cooperation. That's out on February 27 for Patreon supporters and regular release on February 28. To go with that episode is a giveaway for copies of Peter Kropotkin's Mutual Aid and The Conquest of Bread. Until the next time, consider whether or not a homestead is right for you and your plans, while taking care of Earth, yourself, and each other.
In this episode, Kirsten Lie-Nielsen, author of So You Want to be a Modern Homesteader, joins me to share her journey in becoming a modern homesteader and the advice she has for anyone interested in pursuing a similar path. Residing in Maine, I like her story because of how she and her partner had this […] The post 1905 – So You Want To Be A Modern Homesteader with Kirsten Lie-Nielsen appeared first on The Permaculture Podcast.
The Modern Homesteading Podcast, Episode 115 – February 18, 2019 – All The Dirt On Living The Good Life with Author Kirsten Lie-Nielsen. On this podcast episode I have a chat with homesteader and author Kirsten Lie-Nielsen from hostilevalleyliving.com about her homesteading journey and her book “So You Want To Be A Modern Homesteader: All The Dirt On Living The Good Life”
Thomas Lie-Nielsen and Gary chat about tools and hand tools specifically. What drives his company to build quality tools in a throw-away society? And what is the value of Quality?
Thomas Lie-Nielsen and Gary chat about tools and hand tools specifically. What drives his company to build quality tools in a throw-away society? And what is the value of Quality?
Thomas Lie-Nielsen and Gary chat about tools and hand tools specifically. What drives his company to build quality tools in a throw-away society? And what is the value of Quality?
How Ben finished Mike's spoon - Finish Greenwood Spoons Like a Pro by Emmet Van Driesche Question 1: From Fabian: I have a sliding table saw and struggle to convert all the jigs mentioned in the magazine to fit my saw. How would you attach for example a kumiko grid jig as used by Mike in the article "Spice up your work with kumiko" to the saw? Do I fasten it with bolts to the crosscut fence or just let it ride in the one miter slot in the sliding table? In either case it is just secured on the left side of the blade. Spice up your work with kumiko by Michael Pekovich #259–Jan/Feb 2017 Issue Sliding Tablesaws: Is One Right for You? by Daniel Chaffin #272–Tools & Shops 2019 Issue Question 2: From Chris: I'm on the lookout for a new paste wax solution. I'm totally over the petroleum smell of commercial options, and would love something simple with just a bit of luster to apply to my projects. Has Mike ever shared his recipe to attempt to recreate the non-longer-available Goddard's Cabinet Makers Wax? I never used the product in its original form, but I'm sold on his description of it. Something natural, simple, and lemon-scented sounds like the perfect solution for me. Which Waxes Work Best? by Mark Schofield Custom Blending Paste Wax in the Shop - Don Williams site Don'sBarn.com Briwax - Natural Creamed Beeswax Segment: All Time Favorite Tool of All Time… for this week Tom: Cabinet scraper and card scraper Mike: Dead blow mallet to straighten his folded-back backsaw Ben: ARK Shark Guard for his Delta Unisaw Question 3: From Josh: I see pictures posted online where people have gotten a completely mirror polished edge on a chisel or plane iron. I’m using a Norton 1000 water stone, followed by a King 3000, followed by a Norton 8000 stone. I can’t seem to get that mirror polish. I still end up with some scratches, no matter how long I work with the 8000 stone, even when honing a new blade. I know Mike recommends 1000/4000/8000, but Lie Nielsen skips the intermediate grit, so I don’t think the 3000 stone is my problem. I’ve thought about trying to get a finer stone than the 8000 I have, but I don’t want a $100 experiment. Question 4: From Peter: The cement floor of my shop is unsealed and kind of wrecks my feet after a day in the shop. Keeping in mind that it’s a rental, do you have any recommendations for an affordable flooring option that may help my feet and also protect my equipment from the sludge that melts off my wife’s car? It needs to be solid enough that I can have my lathe on that won’t increase vibration. Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.
How Ben finished Mike's spoon - Finish Greenwood Spoons Like a Pro by Emmet Van Driesche Question 1: From Fabian: I have a sliding table saw and struggle to convert all the jigs mentioned in the magazine to fit my saw. How would you attach for example a kumiko grid jig as used by Mike in the article "Spice up your work with kumiko" to the saw? Do I fasten it with bolts to the crosscut fence or just let it ride in the one miter slot in the sliding table? In either case it is just secured on the left side of the blade. Spice up your work with kumiko by Michael Pekovich #259–Jan/Feb 2017 Issue Sliding Tablesaws: Is One Right for You? by Daniel Chaffin #272–Tools & Shops 2019 Issue Question 2: From Chris: I'm on the lookout for a new paste wax solution. I'm totally over the petroleum smell of commercial options, and would love something simple with just a bit of luster to apply to my projects. Has Mike ever shared his recipe to attempt to recreate the non-longer-available Goddard's Cabinet Makers Wax? I never used the product in its original form, but I'm sold on his description of it. Something natural, simple, and lemon-scented sounds like the perfect solution for me. Which Waxes Work Best? by Mark Schofield Custom Blending Paste Wax in the Shop - Don Williams site Don'sBarn.com Briwax - Natural Creamed Beeswax Segment: All Time Favorite Tool of All Time… for this week Tom: Cabinet scraper and card scraper Mike: Dead blow mallet to straighten his folded-back backsaw Ben: ARK Shark Guard for his Delta Unisaw Question 3: From Josh: I see pictures posted online where people have gotten a completely mirror polished edge on a chisel or plane iron. I’m using a Norton 1000 water stone, followed by a King 3000, followed by a Norton 8000 stone. I can’t seem to get that mirror polish. I still end up with some scratches, no matter how long I work with the 8000 stone, even when honing a new blade. I know Mike recommends 1000/4000/8000, but Lie Nielsen skips the intermediate grit, so I don’t think the 3000 stone is my problem. I’ve thought about trying to get a finer stone than the 8000 I have, but I don’t want a $100 experiment. Question 4: From Peter: The cement floor of my shop is unsealed and kind of wrecks my feet after a day in the shop. Keeping in mind that it’s a rental, do you have any recommendations for an affordable flooring option that may help my feet and also protect my equipment from the sludge that melts off my wife’s car? It needs to be solid enough that I can have my lathe on that won’t increase vibration. Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.
Hvorfor er Klarna, Stacc og iZettle gode eksempler på FinTech? Og hvordan kan ny teknologi forenkle og forbedre prosesser i FinTech? I denne episoden av #LØRN snakker Silvija med seriegründer, Henrik Lie-Nielsen, om gode og spennende eksempler på FinTech.— De viktigste konseptene i FinTech er å løse problemer man ikke før hadde gode løsninger på. Med vår relativt digitaliserte finansbransje bør vi kunne ta posisjoner i utlandet med norsk teknologi, forteller Lie-Nielsen.Dette lørner du: InnovasjonFin.TechGründerskapNasjonale og internasjonale eksemplerBli med og #lørn du også — abonner på podkasten vår!Følg oss gjerne i sosiale medier
We’re on Patreon!Check out our Patreon page here, we have tons of support levels, a weekly After Show, monthly hangouts, and more! Our top patron this week is Make Build Modify, and we'd like to welcome our new patrons: Andrew Hunt, Stian Johannessen, Logan Merkey, Robin Lewis, Chris Mayer, Keith Johnson, and Eric Sipe. Thanks for your support!What are we working on?Zack: Chairs, Plasma table, forged key fob,Johnny: Kerfing End TablesJames: Not the dresser! LED Lighting for the new shop space. 8 benches. Wals devoted to Carving, planes and saws. Finishing room. Show Topic: Imagining Our Dream Shops dream woodworking shopJohnny: Space for each medium set up and ready to go. Teaching. An editor. One of everything Veritas and Lie Nielsen.Zack: Multiple lights, multiple cameras, sharpies & tape measures everywhere, spacious, metal side, wood side, storage, paint booth,James: Focused lighting, 6 benches and a tool wall for each type.Q & A:Jon Harmon: "what was your best and worst moment in the shop."Logan Merkey: "James, Favorite wood to carve?"After Show:Peter Warrender: "What tool do you guys have that you don’t need... but really like?"Jacob Hladik: "I'm thinking about adding a router insert to my table saw to save space. Would you guys put it on the left or right side of the blade? I see advantages to both."What’s new/what are we watching/reading?Johnny: Pinegrove on AudiotreeJames: Adjustable ChandelierZack: Design: The Definitive Visual History. Music - The Bones of J.R. JonesFavorite tool/product this week?Zack: Tomahawk 375 Plasma cutterJohnny: Bessey EKT55 One-Handed Edge ClampJames: American Green Lights LEDRandom Notes:Scroll Saw Scribbler (see his incredible work below) Want more episodes of the Crafted Podcast? Check out our Show Archives here.Crafted Podcast, Metalworking, Welding, Woodworking
We all want to kick the tires before we buy, but when it comes to certain things in life it's not always possible. Thankfully the folks at Lie-Nielsen understand this and travel across the states and into the great white north to give every woodworker an opportunity to man handle their planes, saws, chisels and more. While the events are slightly different from venue to venue, they're a lot of fun to attend!! Thanks to everyone who made it to Jeff Miller's in Chicago for the show. It was great to meet all of you and thanks for saying HI, Aiden couldn't believe people actually knew me LOL!!
This week we focus on a variety of workbench and vise questions. Plus, updates on Matt's trip to Lie-Nielsen, more All Time Favorite Tools, Smooth Moves, and your woodworking questions.
This week we focus on a variety of workbench and vise questions. Plus, updates on Matt's trip to Lie-Nielsen, more All Time Favorite Tools, Smooth Moves, and your woodworking questions.
Lie-Nielsen vs Veritas, loose tenons and bed rails, refurbish or buy new, and what we're thankful for!
Shop Talk Live sits down with acclaimed tool maker Thomas Lie-Nielsen. Plus, your woodworking questions answered.
Shop Talk Live sits down with acclaimed tool maker Thomas Lie-Nielsen. Plus, your woodworking questions answered.
Matt Kenney reports on his visit to Maine tool makers, Lie-Nielsen. Plus, new Smooth Moves, Tool Bombs, and your woodworking questions answered.
Matt Kenney reports on his visit to Maine tool makers, Lie-Nielsen. Plus, new Smooth Moves, Tool Bombs, and your woodworking questions answered.
We all want to kick the tires before we buy, but when it comes to certain things in life it's not always possible. Thankfully the folks at Lie-Nielsen understand this and travel across the states and into the great white north to give every woodworker an opportunity to man handle their planes, saws, chisels and more. While the events are slightly different from venue to venue, they're a lot of fun to attend!!Thanks to everyone who made it to Jeff Miller's in Chicago for the show. It was great to meet all of you and thanks for saying HI, Aiden couldn't believe people actually knew me LOL!![dewplayer:http://blip.tv/file/get/Mattvan-423911.mp3]Click to PlayDownload Video FileDownload Audio FileDon't forget to enter for free Schwag and please support our sponsors by visiting their links here on the website.
It's time to wrap up our discussion of the block planes. Hopefully I've answered some questions and explained the hows and whys of using the block plane. It's an important tool for all woodshops, powertool, handtool or hybrid. Regardless of whether it's a low-angle or standard angle block plane, the block plane is something that shouldn't be skimped on when the time comes to buy your first or a new one! As part of the wrap-up today I asked the folks at Lie-Nielsen if we could borrow some of their specialized block planes to get a better look at them. And thankfully...they said yes! So on today's episode let's look at some block planes that look like no other, but work as amazingly as all the others. [dewplayer:http://blip.tv/file/get/Mattvan-TDM86136.mp3]Click to PlayDownload Video FileDownload Audio File Don't forget to enter for free Schwag and please support our sponsors by visiting their links here on the website.
Kaleo Kala's visit to Marc's shop, "The Schwarz", woodworking classes, Lie Nielsen's backorder, new tools from Festool and Powermatic, Forstner bits without spurs, and milling lumber with only a planer and a router table.
Thomas Lie-Nielsen and Gary chat about tools and hand tools specifically. What drives his company to build quality tools in a throw-away society? And what is the value of Quality?