Thin coat designed to resist wind chill and light rain
POPULARITY
63 episodes with windbreaker
52 episodes with windbreaker
3 episodes with windbreaker
5 episodes with windbreaker
2 episodes with windbreaker
2 episodes with windbreaker
2 episodes with windbreaker
2 episodes with windbreaker
2 episodes with windbreaker
This week, with Zac MIA, we are joined by guest Keith Johnson for Episode 172 of "Off The Cut"! This week, Eric continues his grievances with the Shaper Origin's finicky tape and its inability to cut perfectly straight lines. As well as his own planer woes, noting inconsistent feeding on the left side.The discussion shifts to the challenges of installing inset drawer fronts and a preference for Soliche drawer slides over Blum. We also delve into contractor quality and the frustrations of home renovations, highlighting issues like poor trim work and unpainted balusters. Keith explains his decision to drop his contractor's license due to new bond requirements. Do Woodworkers make the worst customers?Got a question that you want us to answer? Send us an email at offthecutpodcast@gmail.com Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: https://streamyard.com/pal/c/5926541443858432 -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesignco YouTube - https://youtube.com/@spencleydesignco TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to:KM Tools for sponsoring the show! Check out everything they have to offer at KMTools.com kmtools.com/SPENCLEYDESIGNCOAnd WTB Woodworking, our newest sponsor! Check out the giveaway over here:https://www.wtbwoodworking.com/giveaway#Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
On this week's episode of Windbreaker, Marty is on vacation, so Yahtzee, JM8 and Nick are discussing open world games and what makes them actually fun to be in.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
This week we welcome our newest sponsor, Bill Burkle at WTB Woodworking, who's absolutely crushing it with his expanding physical store and a huge Wagner moisture meter giveaway. Plus, Bill drops a Fusion 360 shortcut on Eric that just might change everything for your CAD game! Then, it's grievance time! From the Shaper Origin's finicky tape and their adequate customer service to the never-ending museum display stands Deric has been working on; it's a delicate dance of setting clear expectations to avoid future headaches and backing yourself into a corner with the build. A topic tease into the blurry line between "inspiration" and "ripping off" in the creative world. How similar is too similar? We try to figure it out!Got a question that you want us to answer? Send us an email at offthecutpodcast@gmail.com Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: https://streamyard.com/pal/c/5926541443858432 -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesignco YouTube - https://youtube.com/@spencleydesignco TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at KMTools.com kmtools.com/SPENCLEYDESIGNCO #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
We wrap up our spring anime reviews. We give most of our final thoughts on Lazarus ( series over?), MHA Vigilantes , Windbreaker and what may not be back in the review rotation (Loser Ranger sorry buddy). Check our Merch Sales going on July 1-6, 16-20, and 24-27https://linktr.ee/blerd.ish
On this week's episode of Windbreaker, Yahtzee is on vacation, so JM8 and Marty are joined by Jack to chat about their own personal gaming backlogs, especially in the face of the current Steam Summer Sale.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
We pull back the curtain on video editing, including how we "fake it till we make it" with B-roll. We're geeking out over 3D printer filaments, especially glass-filled ABS, is it our new favorite (even if it still stinks!)? Then, things get real in the shop with a painting disaster that left Deric's garage floor and door looking a little emo. We brainstorm ways to clean it up, including some heavy-duty razor blades and paint stripper. We get handy with outdoor power tools that have interchangeable heads – total game-changers for yard work. What is the cost of perfection? How to navigate tricky client expectations. And finally, we give a sneak peek at upcoming videos, including a PlayStation 5 mod. We spill the tea on how to handle sponsored content without annoying you (it's all about that natural flow!). Plus, a quick shout-out to our new favorite tool: the ultrasonic cleaner – even if it makes a terrible noise.Got a question that you want us to answer? Send us an email at offthecutpodcast@gmail.com Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: https://streamyard.com/pal/c/5926541443858432 -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesignco YouTube - https://youtube.com/@spencleydesignco TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at KMTools.com kmtools.com/SPENCLEYDESIGNCO #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
This is the Spring 2025 Rundown, where we discuss these 3 shows!1) Windbreaker Season 2 2) Lazarus3) One Piece: Egghead Arc To join the Discord, follow us on our socials (we're on Threads / Insta, Twitter (X), Bluesky / Hive and Tumblr): https://Linktree.com/animedegensInterested in watch parties? We're going to start hosting some in our Discord! So join up and join us! The Degen Videos are on YouTube & Spotify now! So, Make sure you follow and like the videos over there at https://Linktree.com/animedegensPlease Rate us on your listening platforms and don't forget to tell your anime friends about us! its the best way to support us and we really do appreciate y'all! Thanks for listening!!If you have any Feedback that you'd like to share or have Topics that you'd like for us to discuss on the Degen Episode, Please reach out to us on any of our Socials, Discord or click here! Interested in being a guest? Reach out to Tyler on Discord or Twitter / Threads!Time Stamps:Intro: 00:00Windbreaker Season 2 Episode 12 (Finale) : 05:40Lazarus Episode 12 : 23:50One Piece Episode - Break Hosted on Acast. See acast.com/privacy for more information.
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty chat about the use of time as a central mechanic in video games.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
In this episode of Anime Minority Report, hosts Jamie and Guerby throw hands (verbally, of course) with the critics claiming Windbreaker is... boring. Is it really mid, or are folks just missing the point? The internet says it's too soft for a delinquent anime—where are the busted lips, broken noses, and existential fistfights we were promised? Jamie and Guerby unpack the vibes, the character arcs, and whether softness and street fights can coexist. Expect hot takes, unexpected laughs, and just the right amount of chaos. If you've been side-eyeing Windbreaker or need someone to validate your anime angst, this episode is for you. Tune in, debate with us in your head, and remember—just because it's not Tokyo Revengers doesn't mean it's not worth the ride.
The summer anime season is upon us again and it's jam packed full of fantastic returning shows!!!But while it's very easy to settle back into these big shows, don't forget about the new gems showing up too!All this, plus our picks from the 2025 Spring season and the latest anime news!SHOW NOTES & UPDATES1. We had something go wrong with Aaron's mic as part of the recording (poor connection) so please excuse the issues with his audio track! The issue has been found and addressed :)2. NEW RELEASE DAY: We're now releasing audio episodes on Tuesdays going forward due to changes with work and team availability. Video episodes will continue to release between then and Wednesday evening (mostly due to YT's processing time for ling videos!)VIDEOS!Kawaii-Fi YouTube: https://www.youtube.com/KawaiiFiKyle's YouTube: https://www.youtube.com/@KyleinOrbitTifa's YouTube: https://www.youtube.com/thetkennedy SUPPORT USPatreon: Patreon.com/KawaiiFiBuy us a Coffee: Ko-fi.com/kawaiifi JOIN THE KAWAII-FI COMMUNITYFacebook: https://www.facebook.com/KawaiiFiAnime/Instagram: https://www.instagram.com/kawaiifianime/Threads: https://www.threads.net/@kawaiifianime TikTok: https://www.tiktok.com/@kawaiifianimeDiscord: https://discord.gg/p9ccFx8vTQ LISTEN ELSEWHERE?Spotify: https://bit.ly/Kawaii-FiSpotifyApple: https://bit.ly/Kawaii-FiAppleYT Music: https://bit.ly/Kawaii-Fi-YMCastbox: https://bit.ly/Kawaii-FiCastboxGoodpod: https://bit.ly/Kawaii-fiGoodpodAmazon Music: https://bit.ly/Kawaii-FiAmazonPocket Casts: https://bit.ly/Kawaii-FiPocket EPISODE SEGMENTS00:00:00 – Show Opener00:03:08 – Summer Anime 202500:56:36 – Season in Review01:27:34 – Anime Communique01:49:02 – Next Time, Lagoons 6 Seasons and Keanu BatmanTags: anime,podcast,anime news,anime podcast,anime reviews,anime recommendation,Turkey,Grand Blue Dreaming,The Summer Hikaru Died,Kaiju No 8,City the Animation,New Saga,Dan da Dan,My Dress up Darling,Call of the Night,Nyaight of the Living Cat,Unaware Atelier Meister,Apothecary Diaries,The Too Perfect Saint,Gorilla God's Go-to Girl, Zatsu Tabi,Rock is a Ladies Modesty,Sanrio,Webtoon,Windbreaker,Dangers in my heart,Vinland Saga,Black Lagoon
Eric, Zac and Deric jump right into the "painting woes" of finishing woodworking projects, discussing the pros and cons of different finishes like Rubio and the challenges of touch-ups. They also explore the confusing landscape of modern power tool branding, with humorous takes on DeWalt and Milwaukee's product lines. The conversation veers into memorable (and sometimes horrifying) renovation stories, including dealing with textured walls and unconventional demolition methods. Can you burn drywall?Got a question that you want us to answer? Send us an email at offthecutpodcast@gmail.comBe sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: https://streamyard.com/pal/c/5926541443858432 -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesigncoYouTube - https://youtube.com/@spencleydesignco TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at KMTools.com kmtools.com/SPENCLEYDESIGNCO #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty chat about the highs, lows, and oddities of video games in 2015.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
The Otalku Cafe is open! Join Mat and Starman as they talk about the projects Starman has been working on. Anime reviews roll on as well as they discuss MHA: Vigilantes, Anne Shirley, Go Go Loser Rangers, Lazarus, Wind Breaker, Aharen-san, Shiunji Family, and more!You can also watch this episode in video form on the W2M Network Youtube Channel, please give us a like, comment on the episode, and give the channel a subscribe and follow as well: https://youtube.com/live/LJ1vt6QPoXg
Got a question that you want us to answer? Send us an email at offthecutpodcast@gmail.comBe sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: https://streamyard.com/pal/c/5926541443858432 -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesignco YouTube - https://youtube.com/@spencleydesignco TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at KMTools.com kmtools.com/SPENCLEYDESIGNCO #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty chat about the big reveals from Summer Game Fest 2025.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
Got a question that you want us to answer? Send us an email at offthecutpodcast@gmail.comBe sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: https://streamyard.com/pal/c/5926541443858432 -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesignco YouTube - https://youtube.com/@spencleydesignco TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at KMTools.com kmtools.com/SPENCLEYDESIGNCO #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty dig into the biggest sub-genre of the past few years, and try to figure out what separate as a good cozy game from a bland imitator.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
Welcome back to 3DTAA! Today we have a fun one-shot for you where we dive into Windbreaker season 1. With season 2 currently releasing this is a fun time to find our way (for some of us) into the series. Sit back, relax, and enjoy this week's 3DTAA.If you want to reach out, leave a comment or find us on Substack (substack.com/@3dtaa), X (the artist we wish was still named Twitter) (x.com/3DTAA), or email us! (threedadstalkingaboutanime@gmail.com)Check our site for random other stuff! - https://threedadstalkingab.wixsite.com/website(Disclaimer: We are not a spoiler-free show; listen at your own risk to the episodes and shows that are discussed.)
We are back with a fresh episode; discussing a recent large-scale building project, working with young tradespeople and a non-profit. We also touch on the challenges of selling merch, practical tool tips (like the effectiveness of Torx screws!), and the surprising world of online shopping.Join us for conversations about woodworking, 3D printing, DIY and cross country travel.Got a question that you want us to answer? Send us an email at offthecutpodcast@gmail.comBe sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: https://streamyard.com/pal/c/5926541443858432 -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesignco YouTube - https://youtube.com/@spencleydesignco TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at KMTools.com kmtools.com/SPENCLEYDESIGNCO #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
Welcome to another edition of Otalku Cafe! Join Ethan and Chris as the boys go over more of the Spring 2025 anime, including Fire Force, Windbreaker, Witch Watch, Shiunji Family, ZatsuTabi, and much more! News and notes, and so much more on this weeks episode!You can also watch this episode in video form on the W2M Network Youtube Channel, please give us a like, comment on the episode, and give the channel a subscribe and follow as well: https://youtube.com/live/f5Zn5_l-318
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty celebrate the start of "E3" season by chatting about the advertising -- trailers, print ads, features, interviews, demos, and more -- that actually worked on them in the past.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
What fuels our creative fire? This week, Zac and Eric explore motivation and the creator mindset, sharing what drives them to take on new projects and document the journey. You may even get an early look (or listen) at their upcoming work! No aftershow this week, we held our monthly BYOC. Join the top tier over on Patreon and get in on next month's live BYOC hangout with us!Join us for conversations about woodworking, 3D printing, DIY and cross country travel. Got a question that you want us to answer? Send us an email at offthecutpodcast@gmail.com Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: https://streamyard.com/pal/c/5926541443858432 -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesignco YouTube - https://youtube.com/@spencleydesignco TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at KMTools.com kmtools.com/SPENCLEYDESIGNCO #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
We are back to catch on a few episodes of the spring anime season. In addition to those mention in the title we discuss To Be Hero X, Windbreaker, and Loser Ranger.
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty chat about their favorite weapons in games, and what makes them memorable from a mechanical, visual, and audio perspective.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
Where's the best place to buy tools? The guys go head-to-head this week, comparing big box stores (Home Depot, Lowes), traditional hardware stores (Ace, TrueValue), and discount importers (Harbor Freight, Princess Auto). Expect strong opinions and maybe even a few disagreements! We'll also catch up on our shop projects and the joys (and frustrations) of being content creators.Join us for conversations about woodworking, 3D printing, DIY and cross country travel. Got a question that you want us to answer? Send us an email at offthecutpodcast@gmail.com Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: https://streamyard.com/pal/c/5926541443858432 -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesignco YouTube - https://youtube.com/@spencleydesignco TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at KMTools.com kmtools.com/SPENCLEYDESIGNCO #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
This week on Kaizoku Uncharted, we're narrowing it down to see which shows we're committing to for the Spring season. Tune in to hear which shows they're dropping, which ones they're keeping, and if we're adding any new ones to the roster. These past 3 weeks of shows were strong! It was a slow start from the news to the first show discussed, but we get more animated starting at 5:40. Jakia doesn't think the parents looked long enough for her in The Beginning After The End. Justin is furious that we haven't learned more about Frank in WindBreaker. And the crew is bringing on a new show, Sword of the Demon Hunter. We need some explanation for these time gaps. In My Hero Vigilantes, we are getting the backstory of the making of Stain. Still confused how Knuckleduster isn't a real hero, but Jakia still thinks he's a menace to society. And we're not gonna hate on someone's commitment, we're looking at you Stain. In I Left My A Rank Party, we're impressed by the world-building and how The One Gold came to be, and as always, thank goodness that Lucent is here. Soooo much happened in Apothecary Diaries! It's up there for anime of the year! All this and more in this week's episode of Kaizoku Uncharted.Shows DiscussedOnce Upon a Witch's Death Old Country Bumpkin The Beginning After The End Wind Breaker Sword of the Demon Hunter My Hero Vigilantes Aharen-san Season 2 The Brilliant Healer's New Life In The Shadows Teogonia I Left My A Rank Party Apothecary Diaries Season 2 One Piece
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty chat about the new GTA 6 trailer, and use that to discuss the broader topic of GTA clones.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
Eric is back! We catch up with Eric and hear all about his adventures in the American Southwest, and a new feud with a certain airline, should we just drive everywhere now? We discuss the new Katz-Moses Cleat System and drool over the new shop organization offered by our sponsor in this not sponsored tangent. Get the low down on Zac's latest project, is there a Nintendo product left for him to modify? And, we discuss some tips for finding money in old books when Deric discusses his latest trip North(did Deric and Eric cross paths?). Join us for conversations about woodworking, 3D printing, DIY and cross country travel. Got a question that you want us to answer? Send us an email at offthecutpodcast@gmail.com Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: https://streamyard.com/pal/c/5926541443858432 -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesignco YouTube - https://youtube.com/@spencleydesignco TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at KMTools.com (kmtools.com/SPENCLEYDESIGNCO ) #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty chat about their favorite moments in games where the music takes the spotlight to help create something memorable.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
In this episode, Jamie and Guerby suit up for battle—anime battle, that is. The duo dives headfirst into the chaotic, colorful world of To Be Hero X, giving their unfiltered (and occasionally unhinged) takes on what might be the most absurd masterpiece of the season. But wait—Wind Breaker is back, and so are the debates. Is it peak shonen or just flexin' in a tracksuit? Expect laughs, yelling, and enough hot takes to power a Spirit Bomb. Whether you're Team OP Dad Bod or Ridiculously Fast Delinquent, one thing's for sure: the boys did not come to play nice. Press play and prepare for maximum anime foolishness.
Welcome back Ninjas! The ninjas have a fun dance intro b4 jumping into Windbreaker 1st 3 episodes and joke about the aftermath of gang activities. We run thru a few anime we like, like Witch Watch & Gorilla Gods Go-To Girl. Did Crunchyroll censor the horny??( Notes: CR didn't censor after the delay) MoonRise! Only light spoilers but we love this new Netflix anime but where's promo? Mac finally watches Kowloon Generic Romance and much more! Tap tf in ninjas
While Eric tries not to get lost in the American southwest, Zac and Deric continue on with a new episode. We take the opportunity to discuss the ins and outs of being a content creator in today's ever changing landscape. While exploring the pros and cons of short-form versus long-form content, effective strategies for growing an audience, and the challenges of navigating brand partnerships. What exactly is the long-term viability of content creation as a career? How important is an "Exit Strategy"? Whether you're an aspiring creator or simply interested in the world of online content, we try and bring our personal insight for you this and every week.Get access to Eric's course with the exclusive Off The Cut discount, use code OTC25 at checkout: https://spencleydesignco.com/collections/courses/products/shaker-style-cabinet-door-and-drawer-front-course Join us LIVE for conversations about woodworking, 3D printing, DIY and tax evasion. Got a question that you want us to answer? Send us an email at offthecutpodcast@gmail.com Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: https://streamyard.com/pal/c/5926541443858432 -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesignco YouTube - https://youtube.com/@SpencleyDesignCo TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at KMTools.com (kmtools.com/SPENCLEYDESIGNCO)
This is the Spring 2025 Rundown, where we discuss these 3 shows!1) Windbreaker Season 2 2) Lazarus3) One Piece: Egghead ArcTo join the Discord, follow us on our socials (we're on Threads / Insta, Twitter (X), Bluesky / Hive and Tumblr): https://Linktree.com/animedegensInterested in watch parties? We're going to start hosting some in our Discord! So join up and join us! The Degen Videos are on YouTube & Spotify now! So, Make sure you follow and like the videos over there at https://Linktree.com/animedegensPlease Rate us on your listening platforms and don't forget to tell your anime friends about us! its the best way to support us and we really do appreciate y'all! Thanks for listening!!If you have any Feedback that you'd like to share or have Topics that you'd like for us to discuss on the Degen Episode, Please reach out to us on any of our Socials, Discord or click here! Interested in being a guest? Reach out to Tyler on Discord or Twitter / Threads!Time Stamps:Intro: 00:00Windbreaker Season 2 Episode 4 : 04:30Lazarus Episode 4 : 38:20One Piece: Egghead Arc Episode 1127 : 01:00:50 Hosted on Acast. See acast.com/privacy for more information.
VIC's PICS!We give our first impressions on the anime series, Windbreaker!We would like to say thank you to our sponsor, Tokyo Treat. Treat yourself or a loved one! TokyoTreat makes the perfect gift for any occasion.Use code "OTAKIFY" for $5 off your first #TokyoTreat box through my link: https://team.tokyotreat.com/otakifyanimeAlso, if you feel like supporting this podcast, feel free to use the following link: https://podcasters.spotify.com/pod/show/otakify/supportIt is greatly appreciated!If you guys are interested in contributing to a future podcast topic, make sure to contact us through IG or Twitter@otakify, or even feel free to email us a topic at otakifyreviews@gmail.com
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty use the massive success of Clair Obscure: Expedition 33 as a jumping off point to discuss the current state of AA games.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
The guys are back and doing slightly better than last week. Join them as they discuss Zac's big outdoor patio project with Mark Rayson and MicroPro Sienna, Eric's new online course, Burnout when the finish line is in sight, and the ever-evolving world of online platforms like Spotify and YouTube.In this episode:Sienna Squad Project: Get the details on Zac's upcoming three-day project with Mark Rayson and MicroPro Sienna to rebuild a restaurant's outdoor patio, working with high school students and focusing on the construction process. Designer vs. Builder: A discussion on the challenges of working with designers who prioritize aesthetics over feasibility and managing client expectations. Spotify's Video Push: We explore Spotify's efforts to compete with YouTube in the video space and how creators are porting their content. YouTube Algorithm & Video Performance: Insights into how YouTube pushes videos, the importance of the initial hours for viewership, and how content performs over time. Launching an Online Course: Eric talks about launching his first woodworking course on making shaker style doors and drawer fronts, the technical hurdles faced, and the positive feedback received. Plus, get a discount code for the course! The Creative Process & Project Fatigue: The struggle of finishing projects when the exciting engineering phase is over and the importance of crafting compelling video narratives, even if it means reshooting. The Value of Reviews: A conversation about the role of online reviews in purchasing decisions and how to discern genuine feedback. Get access to Eric's course with the exclusive Off The Cut discount, use code OTC25 at checkout: https://spencleydesignco.com/collections/courses/products/shaker-style-cabinet-door-and-drawer-front-course Got a question that you want us to answer? Send us an email at offthecutpodcast@gmail.com Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: https://streamyard.com/pal/c/5926541443858432 -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesignco YouTube - https://youtube.com/@spencleydesignco TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at KMTools.com (kmtools.com/SPENCLEYDESIGNCO (http://kmtools.com/SPENCLEYDESIGNCO) )
After a rockin intro the Thai recaps her drunk near fatal Maimi trip b4 the gang jumps into Windbreaker 1st two episodes. The convo shifts into the letdown of “The Beginning After the End” then the horniness of “ Please put them on, Takamine-san”
The Otalku Cafe is open! Join Mat and Ethan as a new season beings with brand new shows airing! They'll be giving out their first impressions of the season premieres such as Zatsu Tabi, My Hero Academia: Vigilantes, Beginning After the End, Fire Force, Wind Breaker, and more! Which shows left an impression and which are potentially on the chopping block? Tune in now!You can also watch this episode on video via the W2M Network Youtube channel: https://youtube.com/live/Bj7JlKZD9NY
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty use Blue Prince as a jumping off point to discuss what makes a good video game mystery.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
Join the guys this week as they dive into a variety of topics, from 3D printing products on demand and the struggles of tax season to eye infections and the challenges of being a content creator.In this episode:Tax Day & Podcast Finances: Can you believe Zac still hasn't filed his taxes? . Eye 2 Eye: Hear about a mysterious viral eye infection and the challenges of recording video with limited vision. Content Creation Mindset Shift: A deep dive into the evolution of their YouTube strategies, balancing sponsorships with creating their own products and courses. New Projects & Product Design: Get a sneak peek at Zac's upcoming video project involving cooling a computer with a fan, and Eric's experience designing and prototyping 3D printed battery holders, including a surprising challenge with battery tolerances. 3D Printing Insights: Discussions on recycling 3D prints, affordable filament options, and a clever hack for using non-bamboo filament with Bambu Lab printers. YouTube Recognition & Funny Encounters: Stories of being recognized in public (and on Facebook Marketplace!), and the surprising discovery of Eric's vocal doppelganger. Got a question that you want us to answer? Send us an email at offthecutpodcast@gmail.com Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: https://streamyard.com/pal/c/5926541443858432 -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesignco YouTube - https://youtube.com/@spencleydesignco TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at KMTools.com (kmtools.com/SPENCLEYDESIGNCO)
On this week's episode of Windbreaker, Yahtzee is feeling under the weather, so Nick steps in to chat about roguelikes and roguelites with, JM8 and Marty.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
Welcome back to Off The Cut! In this week's live episode, we kick things off with some of our signature pre-show banter. Then we attempt to put on a show about woodworking, making, and generally creating things for an audience. Tune in as we discuss:Exciting Brand Partnerships: Zac teases an upcoming brand partnership that has Eric green with envy. Cracker Conundrums: Wheat Thins to Veggie Thins, and the ultimate Chicken Biscuit debate.Jonathan's News & KM Tools: The latest from Jonathan at KM Tools, including a tease about his new French cleats. Plus, find out how you can win a $50 gift card to KM Tools by becoming a patron. Product Reviews: Eric shares his experience with N3 Nano ceramic finish on his dining table, sparking a discussion about ceramic coatings for woodworking. Car Talk: We debate the merits of high-trim vs. low-trim vehicles, must-have car features, and Zac's upcoming trip to Montreal for the Ford Maverick launch. Freight Shipping Adventures: Learn about Zac's recent experience with freight shipping and we discuss some unique logistical vocabulary like LTL (less than truckload).Shopify Love: Zac raves about how easy Shopify makes running his online store.Exciting Sneak Peeks: Stay tuned for a hint about a potential game-changer in the tool worldGot a question that you want us to answer? Send us an email at offthecutpodcast@gmail.com Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: https://streamyard.com/pal/c/5926541443858432 -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesignco YouTube - https://youtube.com/@spencleydesignco TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at KMTools.com (kmtools.com/SPENCLEYDESIGNCO)
This is the Spring 2025 Rundown, where we discuss these 3 shows!1) Windbreaker Season 2 2) Lazarus3) One Piece: Egghead ArcTo join the Discord, follow us on our socials (we're on Threads / Insta, Twitter (X), Bluesky / Hive and Tumblr): https://Linktree.com/animedegensInterested in watch parties? We're going to start hosting some in our Discord! So join up and join us! The Degen Videos are on YouTube & Spotify now! So, Make sure you follow and like the videos over there at https://Linktree.com/animedegensPlease Rate us on your listening platforms and don't forget to tell your anime friends about us! its the best way to support us and we really do appreciate y'all! Thanks for listening!!If you have any Feedback that you'd like to share or have Topics that you'd like for us to discuss on the Degen Episode, Please reach out to us on any of our Socials, Discord or click here! Interested in being a guest? Reach out to Tyler on Discord or Twitter / Threads!Time Stamps:Intro: 00:00Windbreaker Season 2 Episode 1 : 2:10Lazarus Episode 1 : 34:15One Piece: Egghead Arc Episode 1123 / 1124 : 59:15 Hosted on Acast. See acast.com/privacy for more information.
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty chat about the importance of "good graphics" in 2025, and whether they're enough to carry an entire game.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty chat about the importance of "good graphics" in 2025, and whether they're enough to carry an entire game.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty chat about which games they personally think represent the "peak" of each of the major genres.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
On this week's episode of Windbreaker, Yahtzee, and Marty are joined by Jack to chat about the concept of "one-hit wonders" in music and movies, and whether that exists in games as well.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty celebrate March 10th, aka Mario Day, by choosing which four games featuring the iconic mascot that they'd choose over all others.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
On this week's episode of Windbreaker, Yahtzee, JM8, and Marty chat about their least-favorite kinds of levels in games, from forced stealth sections to FromSoft's beloved poison swamps.Second Wind is fully independent, employee-owned and fan-funded. Consider supporting us on Patreon for as little as $1/month at patreon.com/SecondWindGroup
Jay, an indie game dev and co-founder of Second Wind Group, and Jess, editor and creator for Second Wind Group, are the first ever DUAL GUESTS on the show! With significantly more brain power in their brain skulls, they tackle the terms:shakespeareanteaches you how to commit crimestimeloopThe cheekily named game Prophicide ;) features a surprisingly amount of soup related content for a game about murdering a king. But that's what you get with a timeloop! Soup in the first loop, soup in EVERY loop after that.Listen to Jay's podcasts, Windbreaker and Dev Heads! And you can watch Design Delve over on Second Wind's YouTube channel.Follow Jess on Bluesky @PrettyGrimGames, and watch her livestream with Second Wind Group on Twitch!Visit the DFTBA Big Game Hunger merch shop at bit.ly/jennamerch. Support this show, and submit your OWN random prompts, by subscribing at Patreon.com/TheJenna. Gift subscriptions are now available at Patreon.com/TheJenna/Gift.Email the show at BigGameHungerPod@gmail.com.Big Game Hunger is part of the Multitude Collective of podcasts. Created and hosted by Jenna Stoeber.Big Game Hunger is a weekly video game podcast where Jenna Stoeber and a guest get three random prompts and have to make the big next game based on them.See Privacy Policy at https://art19.com/privacy and California Privacy Notice at https://art19.com/privacy#do-not-sell-my-info.
© 2020-2025 Ivy Podcast Discovery LLC
