BIM Heroes

BIM Heroes Ep. 17: The State of Lean with Adam HootsIn Episode 17 of the BIM Heroes podcast, Cody sits down with Adam Hoots, a lean coach and passionate builder, to talk about what's working (and what's not) in construction today.From contracts and culture to technology and trust, this episode digs deep into why so many projects struggle and what it takes to do things better.Chasing the “Best Deal” Can Cost More in the EndAdam doesn't hold back on the topic of lump sum contracts. While they might sound like a safe financial choice, they often lead to a flood of change orders and, in the end, a higher cost. Even worse, they break down trust and collaboration. When contractors are brought in early and treated like partners, projects run smoother and usually end up cheaper and better.Our Contracts Are Built for Conflict, Not CollaborationToo many construction contracts are written with a focus on risk and dispute resolution. Words like “conflict” and “claim” show up far more than “partnership” or “trust.” According to Adam, this mindset sets teams up for failure before the project even begins. Instead, teams should be aligned around what a successful project feels like from the start, having clear, shared expectations and open conversations from day one.Tech Isn't the Answer. Unless It Helps in the FieldThere's no shortage of construction software out there, but that's part of the problem. Many tools add complexity without solving real problems. Adam's rule is simple: if the tech doesn't help crews put more work in place, it's a waste. But when used well, like 4D scheduling or smart procurement tools, it can support better planning, clearer communication, and safer job sites.4D Over CPM: Seeing Is BelievingTraditional CPM schedules are too long, too complex, and too disconnected from the reality of site work. Adam prefers tools like takt planning and the Last Planner System, which help teams work in smaller batches, reduce bottlenecks, and keep production flowing. And when schedules are paired with 4D visuals, the entire team can see what's happening. And that changes everything.Designers Are Under Pressure, and It ShowsSoftware has sped up design work, but it's also created a reliance on copy-paste templates and typical details. This overproduction leads to defects, rework, and wasted time. Adam points out that designers are often stretched too thin, asked to juggle too many projects because the software “makes it faster.” The result? Important project-specific details get missed, which hurts everyone down the line.Don't Forget the People Doing the WorkAdam makes a strong case for treating the folks on the ground (the trades, the project engineers, the interns) as the most important part of the process. Too often, new engineers are thrown into critical tasks like RFIs and submittals with little guidance, while leadership distances itself. Instead, leaders should be front and center, setting the tone, building trust, and making people feel valued from day one.The Future of Lean Is All About Systems and TrustLooking ahead, Adam believes lean will become more focused on systems thinking, seeing how one part of the job affects everything else. It's about shifting from siloed teams to interconnected ones that understand how to work together effectively. His work is focused on something he calls the “Trust Circle,” which helps teams build transparency, call out issues early, and recognize the people who consistently show up and do the right thing.The goal isn't just to build faster or cheaper. It's to create healthier, more honest, and more sustainable project environments. And that starts by listening to the people doing the work and building around their needs.

BIM Heroes Episode 16: When Buildings Become ComputersThe Metaverse Meets Hard Hats with Paul DohertyFrom Trade Shows to Smart CitiesPaul Doherty, the architect-turned-tech-evangelist behind The Digit Group, takes us on a wild ride from 1990s CAD revolutions to the futuristic smart cities of tomorrow. What starts as a career retrospective quickly becomes a masterclass in how technologies like digital twins and the metaverse are quietly transforming construction sites today.Paul's journey reads like a time capsule of AEC tech history. After cutting his teeth designing IBM's trade show booths (where he worked with a fledgling Microsoft and Adobe), he became one of BIM's earliest champions - helping sell the first seats of Revit before its $133M Autodesk acquisition. His stories of convincing skeptical architects to adopt 3D modeling in the early 2000s will make any tech implementer nod in sympathy.The Pain Points Driving ChangeTwo harsh realities are pushing innovation:Labor shortages mean we must "do more with less" - Paul argues that 3D construction docs aren't just nice to have but essential for clear communicationLanguage barriers go deeper than translation - when Spanish-language plans fail because workers can't read, animated work instructions become criticalDigital Twins Get RealForget the hype - Paul shares concrete examples of digital twins in action:Construction sites that never sleep: Avatars handle nighttime progress tracking and safety checksThe $80M virtual seats experiment: How Dubai's Burj Al Arab hosted a boxing match where digital tickets outsold physical onesReality capture's dirty secret: Most "scan-to-BIM" workflows still rely on manual cleanup (despite iPhone LiDAR's promise)Metaverse for Hard HatsThis isn't about VR goggles - it's about spatial computing that blends into workflows:NPC project managers: AI-driven non-player characters that know every library ever built could soon advise architectsBuildings that talk back: Imagine your office saying "The air filter on floor 2 needs changing" in real timeeSports stadiums 2.0: Kinetic seating sections that physically rearrange based on audience demandThe Road AheadPaul leaves us with both warnings and opportunities:Trust issues: Blockchain-based smart contracts may solve construction's transparency problemsLegacy mindset: The industry still clings to 2D even as 3D proves its worthAuthenticity matters: Smart cities fail when they feel like "plastic mannequins" rather than organic communitiesFinal Takeaway: This episode shines when Paul grounds futuristic concepts in today's job site realities. The metaverse isn't coming - it's already here in pieces for forward-thinking firms.

BIM Heroes Podcast Episode 15: The State of Bluebeam TechnologyIn this episode of the BIM Heroes Podcast, host Cody Whitelock is joined by Bryan Gaitan, a U.S. CAD reseller of Bluebeam, and Ken Phelps, a Bluebeam Specialist. Together, they explore the latest advancements in Bluebeam technology, discussing how it's reshaping document management, collaboration, and automation in construction workflows.Show Highlights:Maximizing Bluebeam for Construction EfficiencyBryan and Ken explain how Bluebeam's powerful tools - custom stamps, layers, tags, and spaces - are helping teams streamline document markup and improve collaboration. They discuss automation features that reduce manual effort and boost efficiency across projects. Scripting & Automation – Custom stamps and scripting tools speed up document processing and standardization. Bookmarks & Hyperlinks – Smart navigation within PDFs ensures quick access to critical project details. Spaces & Layers – Enhanced organization makes it easier to categorize and filter content within complex documents.From On-Screen to Onsite: Bluebeam Cloud & Mobile AccessibilityThe transition to Bluebeam Cloud is a major focus, enabling teams to access and edit documents from anywhere. Bryan and Ken explain how mobile-friendly collaboration tools improve field-to-office communication and streamline on-site workflows.AI in Bluebeam: The Future of Smart Document ManagementThe conversation explores AI-powered enhancements like auto-aligned document comparison, which simplifies version control. They discuss how future AI advancements could automate takeoffs, object recognition, and intelligent search, making Bluebeam even more powerful.The Role of Bluebeam in Project Handover & CollaborationKen and Bryan highlight how Studio Sessions and project archiving are making project handovers more efficient and organized. They also discuss Bluebeam's growing integrations with software like Procore and Autodesk, solidifying its role as a must-have tool for construction professionals.Training & Adoption: Bridging the Knowledge GapDespite its capabilities, many users aren't leveraging Bluebeam's full potential. The episode covers best practices for onboarding new users, including structured training programs and Bluebeam University, to help teams standardize workflows and maximize efficiency.Looking Ahead: The Future of Bluebeam TechnologyThe episode wraps up with a discussion on where Bluebeam is headed, from AI-driven automation to deeper cloud integration. Bryan and Ken share their insights on how digital transformation is evolving construction technology, making Bluebeam an essential tool for modern project management.

BIM Heroes Podcast Episode 14: State of Project Management Technology In this episode of the BIM Heroes Podcast, host Cody Whitelock discusses the evolving landscape of project management technology. He is joined by Dylan John, a Construction Project Management/Technology Champion (CM-BIM) and Adjunct Professor, to explore how AI, BIM, and other digital tools are reshaping the industry. Show Highlights: Understanding the Role of AI and BIM in Project Management: Dylan discusses the integration of AI and Building Information Modeling (BIM) into project management, emphasizing their potential to enhance decision-making and operational efficiency. He shares insights into how these technologies are being applied across various stages of construction projects. Key Technologies Transforming Project Management: AI and Machine Learning: Automating routine tasks and analyzing large datasets to identify trends and forecast issues before they escalate. BIM: Enhancing visualization, improving accuracy in planning, and facilitating better collaboration among stakeholders. From Theory to Practice: Real-World Applications Dylan provides examples from his experience at Rycon Construction, illustrating successful implementations and the tangible benefits of embracing these technologies, such as reduced costs and shortened project timelines. Challenges and Opportunities: The conversation also covers the hurdles in adopting these technologies, such as the initial investment and the need for upskilling teams, while also looking at the long-term gains they offer in terms of risk mitigation and value addition. Looking Ahead: The Future of Project Management Tools The episode concludes with a discussion on the future trends in project management technology, including the potential of digital twins and the increasing importance of cybersecurity in a digitally-driven construction environment. Listen to the full episode on: Spotify: http://evr.cm/spotify Apple: http://evr.cm/apple YouTube: http://evr.cm/youtube

BIM Heroes Podcast Episode: Tackling Water Waste with IoT and AI In this episode of the BIM Heroes Podcast, host Cody Whitelock delves into the critical issue of water waste and sustainability in the built environment. Joined by Eilon, CEO of WINT Water Intelligence, the conversation explores how IoT technology, AI, and data-driven insights transform water management in construction, facilities, and industries like food and beverage. Show Highlights: The Hidden Costs of Water Waste Eilon sheds light on the startling statistic: 25% of water in commercial buildings is wasted. Beyond the environmental implications, this inefficiency carries significant financial and operational costs. WINT's technology aims to tackle these issues with real-time monitoring and actionable intelligence, helping companies save water and money while achieving their ESG goals. How the Technology Works WINT uses IoT sensors to monitor water flow at high resolution. The system learns typical water usage patterns over time, identifying anomalies like leaks, misconfigured equipment, or burst pipes. Key capabilities include: Real-time monitoring: Continuous analysis of water flow for early detection of abnormalities. Automatic shutoff: Systems can close valves to prevent extensive damage. Actionable insights: Alerts and analytics help users understand and address inefficiencies. From Construction to Operation: WINT's solutions support the entire building lifecycle, from construction to operation. By involving key stakeholders - such as contractors, insurers, and building owners - during the design phase, the system can be tailored for maximum impact. Helps meet insurance requirements by mitigating water-related risks. Reduces delays caused by water damage. Optimizes water use and addresses leaks proactively. Supports ESG reporting with comprehensive data on water usage and carbon footprints. Real-World Impact Eilon highlighted WINT's success across industries, noting their systems have: Reduced water waste by 27% on average, with some facilities achieving savings of up to 80%. Prevented millions in water damage by identifying and addressing leaks before they escalated. Looking Ahead: Data-Driven Sustainability The future of water management lies in data and integration. WINT is focusing on: Enhancing predictive capabilities using AI and machine learning. Integrating with ESG platforms to provide seamless reporting. Offering tools for benchmarking and comparing water efficiency across multiple facilities. By providing actionable insights and reducing water waste, WINT is not just saving resources but also helping organizations meet their sustainability objectives. Listen to the full episode on: Spotify: http://evr.cm/spotify Apple: http://evr.cm/apple YouTube: http://evr.cm/youtube

BIM Heroes Podcast Episode 12: State of Photo Progress Documentation In this episode, host Cody Whitelock explores advancements in photo progress documentation using 360-degree photos, drones, and BIM technologies. He is joined by Charlie Solan, Chief Operating Officer at Evercam, and Osama Bonner, Head of the 3D Department, who share their expertise in integrating these tools into the construction workflow. Current State and Challenges of Photo Documentation The conversation starts with an overview of the current landscape of 360 photo and drone usage. Charlie and Osama emphasize how the ease of capturing data has improved significantly with smaller, more accessible devices, lowering the barrier to entry for non-specialists. However, they note challenges like hardware durability and the need for light availability during image capture. The speakers compare static photos, 360-degree videos, and Lidar-enhanced scans. 360 cameras are praised for providing comprehensive visual data with a single walkthrough. Drones offer a bird's-eye view, capturing site-wide imagery efficiently from multiple angles. Lidar systems add depth information, making 3D modeling and photogrammetry possible, but at a higher cost. Impact on Site Inspections and Collaboration Charlie and Osama highlight how photo documentation tools reduce the need for frequent on-site inspections. Engineers and inspectors can now review images remotely, enhancing collaboration and cutting down on travel time and costs. This also enables specialists to focus on key issues without physically being present at the construction site. Building Workflows Around Digital Tools The episode underscores how construction workflows are evolving to integrate these technologies. Just as AutoCAD and BIM changed the industry, photo progress documentation is becoming a core part of modern construction management. Osama explains how these tools serve as a central hub for inspections, site monitoring, and data sharing, reducing the reliance on multiple site visits and enhancing efficiency. Future Potential of 360 Photo and Drone Technology Charlie discusses the future potential of these technologies, noting that as hardware continues to shrink and become more user-friendly, even smartphones could serve as key documentation tools. The speakers also reinforce stress the importance of capturing more data than is immediately needed, as the ability to revisit detailed site records will enhance project management over time. Listen to the BIM Heroes Podcast on: Spotify: http://evr.cm/spotify Apple: http://evr.cm/apple YouTube: http://evr.cm/youtube

BIM Heroes Podcast Episode 11: The State Of Generative Design In this episode, host Cody Whitelock explores the evolving landscape of generative design with Laura Paciano, the Senior Vice President of Growth at TestFit. Laura, who transitioned from the AEC sector to real estate technology, shares insights into how TestFit uses AI to optimize site planning and building designs. She recounts the company's origins, driven by the need to streamline repetitive tasks in architecture, and discusses the potential for AI to transform the construction industry. Show Highlights: Current State and Challenges of Generative Design: The episode addresses the present capabilities of generative design in real estate and AEC. Laura discusses the promise of data efficiency and the ongoing challenges in realizing the full potential of AI in this space. Rising housing costs and land shortages underscore the need for optimization in generative design. Test Fit's Approach and Impact: An overview of TestFit's journey from a simple application to a comprehensive platform that addresses various architectural and development challenges. Laura explains how TestFit connects stakeholders by generating design options and facilitating collaborative decision-making. The platform's ability to automate error-prone tasks and provide quick, data-driven answers is emphasized. Future Potential and AI Integration: Laura shares her vision for the future of generative design, emphasizing the untapped potential of AI and machine learning in the industry. The discussion touches on the importance of integrating real-time data and the possibilities of using AI to enhance site planning and building optimization. Adoption Challenges and Industry Impact: The conversation covers the challenges faced by architects and developers in adopting new technologies. Laura highlights the differences in adoption barriers between architects, who are accustomed to design tools, and developers, who often rely on spreadsheets. Innovative Solutions and Urban Planning: TestFit's new free tool for urban planning, Urban Planner, is introduced, democratizing access to site planning resources. The potential for integrating contextual data, such as environmental risks and zoning information, into the site planning process is discussed. Listen to the BIM Heroes Podcast on: Spotify: http://evr.cm/spotify  Apple: http://evr.cm/apple  YouTube: http://evr.cm/youtube 

BIM Heroes Podcast Episode 10: The State of SUE (Subsurface Underground Engineering & Subsurface Utility Model.) In this episode, host Cody Whitelock talks with Aaron Goldstein, a geophysicist and expert in subsurface utility engineering (SUE) from Universal Engineering Sciences (UES), and Lera Cirlan, part of the virtual design consulting team at UES that creates 3D BIM models. They discuss the current state of SUE practices in the construction industry and the challenges companies face in accurately mapping underground utilities. Aaron and Lera also explore the future potential of integrating high-quality SUE data with building information modeling (BIM) from the very start of projects. This could allow for enhanced design coordination, utility clash detection, construction planning, and visualization for project stakeholders throughout the lifecycle. Show Highlights: Importance of SUE and Integrating with BIM: Aaron explains why accurate underground utility mapping is critical from the geotechnical engineering phase through construction. He highlights how utility strikes are a major liability and the challenges of existing utility networks. Aaron and Lera discuss the potential benefits of incorporating comprehensive, high-quality SUE data into BIM models for improved design coordination, clash detection, and visualisation. Current State of SUE Practices: The discussion covers the evolution of SUE from its beginnings in the 1980s to the latest geophysical techniques like ground penetrating radar (GPR), electromagnetics, and acoustics being used UES's Approach to SUE and BIM Integration: Aaron provides an in-depth look at how UES is expanding into offering SUE services alongside its traditional geotechnical, construction materials, and other services Lera discusses her role in creating 3D BIM models from the comprehensive SUE survey data collected by Aaron.  They discuss the process of integrating this accurate utility data into design models for enhanced visualization and coordination Future of SUE and BIM Coordination: Looking ahead, they consider what developing technologies like virtual reality (VR) and augmented reality (AR) could enable for utility mapping and model visualization. Aaron outlines his vision for SUE to become a seamless part of the BIM process from the very start of projects Listen to the BIM Heroes Podcast on: Spotify: http://evr.cm/spotify  Apple: http://evr.cm/apple  YouTube: http://evr.cm/youtube 

BIM Heroes Podcast Episode 9: The State of Visualization of Transportation/Infrastructure In this episode, host Cody Whitelock and Sam Lytle, talk about the present and what's to come for visualization in transportation and infrastructure. They look into how cutting-edge visualization tools are changing the way projects are planned, how stakeholders interact, and how the public gets involved. Importance of Visualization in Transportation/Infrastructure: Sam explains why visualization is a critical tool in the planning and design phases of transportation and infrastructure projects. He highlights the benefits of enhanced stakeholder communication and improved public understanding through detailed visual representations. Current Trends and Technologies: The discussion covers the latest trends and technologies in visualization, including virtual reality (VR), augmented reality (AR), and real-time rendering. Sam shares insights into how these technologies are being integrated into everyday practices and the challenges and opportunities they present. Beyond Typicals and Its Impact: Sam provides an in-depth look at Beyond Typicals, a visualization tool that simplifies complex transportation and infrastructure designs. He discusses its key features, real-world applications, and success stories, along with feedback from users and industry experts. Future of Visualization: Looking to the future, Sam and Cody talk about the direction visualization technologies might take. They consider what these technologies could do for the transportation and infrastructure industries and discuss how industry professionals might prepare for these new developments. Sam also outlines his future goals for Beyond Typicals and Beyond CAD Inc., emphasizing their potential to improve project management, risk analysis, and cost estimation. Listen to the BIM Heroes Podcast on: Spotify: http://evr.cm/spotify  Apple: http://evr.cm/apple  Show Highlights:YouTube: http://evr.cm/youtube

BIM Heroes Podcast Episode 8: State of Venture Capital In this episode of the BIM Heroes Podcast, host Cody Whitelock and Alice Leung, the Vice President, Platform and Product Strategy at Brick & Mortar Ventures talk about the evolving landscape of venture capital within the architecture, engineering, and construction (AEC) industry, highlighting significant trends and the impact of technology on this dynamic field. Show Highlights: Alice provides an overview of the current state of venture capital, focusing on how it's shaping the AEC sector. They discuss the increasing involvement of corporate venture capital and its influence on innovation and technological adoption in construction. Alice's Journey: From her early days at DPR Construction to her pivotal role at Brick and Mortar Ventures, Alice shares her transition from construction operations to focusing on technology and innovation, emphasizing the importance of technology in enhancing construction practices. Challenges and Opportunities: The conversation covers the key challenges in adopting new technologies in AEC, such as cultural shifts and training needs. Alice shares insights from her extensive experience, including how to overcome scepticism and the strategic benefits of embracing tech advancements. Future of AEC and Venture Capital: Looking ahead, Alice and Cody speculate on the future trends in venture capital and technology in the AEC industry. They discuss the potential of AI and machine learning in improving project management, risk assessment, and cost estimation. Listen to the BIM Heroes Podcast on: Spotify: http://evr.cm/spotify  Apple: http://evr.cm/apple  YouTube: http://evr.cm/youtube 

BIM Heroes Podcast Episode 7: State of AEC Consulting & Risk Mitigation In this episode of the BIM Heroes Podcast, Erin Khan, a construction technology expert and host Cody Whitelock talk about the integration of technology in construction management. They focus on how technology plays a crucial role in risk mitigation. They also discuss the impact of 360 reality capture and autonomous robotics and these technologies enhance efficiency and safety on construction sites. This is an episode about the importance of these advancements in the modern construction landscape. Show Highlights: Technology in AEC Consulting: An overview of how 360 reality capture and autonomous robotics are currently being deployed to streamline workflows, enhance precision in project planning, and ensure the safety of construction sites. Applications in Construction: How 360 reality capture allows for detailed planning and simulation before physical work begins. The use of autonomous robotics for tasks such as site surveying and material delivery is also discussed, and how these innovations lead to significant time savings and risk reduction. Erin shares firsthand experiences and insights on the process of adopting these new technologies within the AEC sector. She discusses the initial resistance, the learning curve, and eventually, the benefits realised, including examples from projects that have successfully integrated these tools for improved outcomes. Challenges in Technology Adoption: From overcoming scepticism to training staff and adjusting to new workflows, Erin and Cody discuss strategies that companies have employed to navigate these challenges, showcasing how adaptation leads to substantial rewards. Future Outlook: Thoughts on the future of technology in AEC consulting, especially the potential for AI and machine learning to further improve project management, risk assessment, and cost estimation, paving the way for even more integrated, efficient, and safe construction processes. Listen to the BIM Heroes Podcast on: Spotify: http://evr.cm/spotify  Apple: http://evr.cm/apple  YouTube: http://evr.cm/youtube 

Show Highlights: In this episode of the BIM Heroes Podcast, Jacqueline Chen, Technical Product Manager, and Hunter Hayes, Product Sales Engineer at Bentley. Talk about Bentley Systems' innovative solutions for integrating changes back into source scheduling products, highlighting the relationship between various construction management tools. The conversation looks into how 4D BIM is changing project planning and execution, and  paving the way for a future where construction management is more integrated, efficient, and intelligent. 4D BIM Scheduling Integration: integrating updates from 4D tools back into source scheduling products, highlighting the intertwined relationship between different BIM tools and scheduling products. Bentley's Role in 4D BIM: Bentley Systems' commitment to covering the lifecycle of a project from design to operation is emphasized, with a focus on providing tools for users to perform tasks in a connected environment. The Evolution of 4D BIM: how 4D BIM has evolved over the years, moving from a new concept to a leading position in the industry. Challenges such as data connection from different sources and the reluctance towards change. Benefits of 4D BIM: The benefits of 4D BIM, including enhanced transparency, improved communication, and better visualization for collaboration and decision-making, are explored. Geo-Location and Reality Capture: The importance of geo-location in 4D BIM and the integration of reality capture technologies, like construction cameras, to provide real-time updates and comparisons between planned progress and actual site conditions. 5D BIM Aspirations: The discussion touches on the potential for 5D BIM to improve cost estimation and management by linking cost data directly to the BIM model and schedule. The Future of 4D BIM: The episode concludes with reflections on the future of 4D BIM, emphasizing the need for more integrated, efficient, and intelligent solutions. The role of technology in empowering project teams to make better decisions and work more efficiently is highlighted. Listen to the BIM Heroes Podcast on: Spotify: http://evr.cm/spotify  Apple: http://evr.cm/apple  YouTube: http://evr.cm/youtube 

BIM Heroes Podcast Episode 5: State of BIM Coordination In this episode of the BIM Heroes Podcast, host Cody Whitelock, a VDC virtual construction manager at Barnhill Contracting, sits with David Gomez Senior VDC Expert and Coordinator at Revizto to discuss the changes sweeping through the construction industry, driven by the adoption of Building Information Modeling (BIM) and other digital innovations. The conversation centres around the role BIM plays in facilitating collaboration, integration, and efficiency. They talk about how digital tools like Evercam and Revizto are not just enhancing the construction workflow but are also reshaping the way stakeholders interact and operate.  Show Highlights: BIM's Influence on Field and Operations Teams: BIM extends its influence beyond planning and design, significantly changing daily operations on construction sites. These changes include introducing more efficient, technology-enhanced methods that replace traditional, manual practices. Evolution of BIM Coordination: The coordination process in BIM has shifted from a one-size-fits-all approach to more specialized, targeted strategies. This evolution is driven by advancements in software, allowing for more nuanced and efficient project coordination. Integrating Design and Construction Teams: Integrating design teams with contractors and subcontractors poses unique challenges, particularly with differing coordination practices across regions. The key to successful integration lies in fostering strong, collaborative relationships among all stakeholders involved. Design Models as Contract Documents: The trend of using design models as contract documents is gaining traction, reflecting a significant shift in how contractual obligations are viewed and managed in the construction industry. This approach necessitates a balance between model accuracy and the traditional nature of project documentation. Revizto's Role in Construction Management: Revizto is a tool in modern construction management, that facilitates improved communication and efficient problem-solving. Its application across various projects demonstrates its ability to streamline processes, enhance stakeholder collaboration, and drive project efficiency. Listen to the BIM Heroes Podcast on: Spotify: http://evr.cm/JzUl Apple: http://evr.cm/ZzPn YouTube: http://evr.cm/BzTT

In this episode, Brian Skripac and Clive Jordan discuss BIM execution plans in construction. They highlight the challenges and advancements in integrating digital tools and collaboration in project planning. Focusing on the U.S. construction industry, they address the unique issues related to contractual language and documentation, contrasting with practices in other countries. The conversation covers the complexities of simplifying BIM execution, the diverse roles in project delivery, and the importance of evolving documentation for efficiency. They also examine the impact of technology on project delivery, the difficulties in defining detailed requirements, and the significance of tracking performance in construction projects, providing insights into the current and future state of data governance and digital planning in the industry. Guest: Brian Skripac Director, Virtual Design & Construction Design-Build Institute of America Clive Jordan Co-founder and CEO Plannerly Episode Highlights: BIM Execution Planning: Clive Jordan's approach to simplifying BIM execution planning through automation and smart fields. Brian Skripac's insights on the role of the Design-Build Institute of America in developing best practices for project delivery. Challenges in Contractual Language: Debating the issue of models not being part of contract documents in the U.S., unlike other countries. Importance of evolving documentation in construction projects. Design and Construction Collaboration: The necessity for improved communication to avoid effort duplication in areas like lighting. Early stakeholder involvement for better project efficiency. Project Delivery Models: Shift from traditional models to collaborative approaches like design-build. Focus on optimizing project outcomes rather than individual components. Role of Technology in Construction: Challenges in defining and tracking detailed task requirements. The potential of technology to enhance project delivery and collaboration. Workforce Dynamics: Bridging the gap between experienced professionals and the tech-savvy younger generation. Emphasizing the importance of knowledge retention within project teams. Lean Construction Principles: The importance of embracing lean concepts for reducing waste and improving efficiency. Real-world examples demonstrating the benefits of collaboration and planning. The integration of digital tools and collaborative approaches in the construction industry is significantly evolving, including in BIM execution planning. Challenges in the U.S. construction industry, especially regarding contractual language and model documentation, contrast sharply with global practices. Key factors such as evolving documentation, the transformative impact of technology on project delivery, and the importance of meticulous planning and performance tracking are highlighted. These developments underscore a comprehensive perspective on current trends and future directions in data governance and digital planning within the construction sector.

In this episode, Andrew Victory and Dara Khera discuss the complexities clients face in Building Information Modeling (BIM) and construction. They explore how BIM impacts client expectations and project outcomes, the evolving role of technology, the importance of a Common Data Environment (CDE), and the necessity of early client involvement. The conversation also covers the limitations of current construction software and industry practices, and potential future advancements like generative design and blockchain, underscoring the need for a more collaborative and technologically advanced construction industry. Guest: Andrew Victory Global Digital Transformation Leader - D&E Arcadis  Dara Khera Managing Director, WORK ltd Episode Highlights: Client Awareness and Misconceptions about BIM: Discussing the lack of client awareness and understanding of BIM's capabilities and limitations. The broad and often ambiguous definition of BIM leading to misconceptions. Collaboration and Contractual Challenges: The adversarial nature of contracts in the Western construction industry and its impact on collaboration. Cultural differences in construction practices, particularly contrasting Western and Japanese approaches. Software and Industry Inefficiency: Critical evaluation of the effectiveness of BIM software in improving industry productivity. Historical overview of CAD and Revit development and their limitations. Importance of Common Data Environment (CDE): The necessity for a unified platform for information sharing among all project stakeholders. Challenges in establishing and maintaining a common data environment. Client Engagement and Specifications: The crucial role of client involvement from the project's inception. Importance of clients specifying their needs and setting project standards. Modeling, Data Management, and Future Directions: Discussion on the significance of both graphical and non-graphical data in BIM. Anticipating future advancements in construction technology, including generative design and blockchain. Industry Resistance to Change and Potential for Improvement: Addressing the construction industry's slow pace of change and systemic issues. The potential for technology to revolutionize construction practices, yet hindered by current industry norms. The role clients play in shaping the construction industry's future is crucial. Their involvement and understanding significantly influence project outcomes, highlighting the need for enhanced education, improved software solutions, and greater collaboration across project phases. This underscores the importance of clear communication and a proactive approach from clients to successfully adopt and implement advanced construction methodologies, leading to a more integrated and technologically progressive construction sector.

In this episode, Chris Jackson from Esri and Jonathan Ng from Hexagon Geosystems discuss the integration of geospatial technologies in construction. They talk about the shift from traditional coordination methods to advanced GIS and BIM integration, with a focus on the environmental aspects of building and infrastructure. Chris shares insights on Esri's journey from mapping natural environments to its current convergence with technology, emphasizing sustainable design and stakeholder collaboration. Jonathan on the other hand, discusses Hexagon's evolution from mapping to a data-centric approach, stressing the need for enhanced data collection methods, including sophisticated scanning and mapping technologies for underground and underwater areas. The conversation also covers the broader implications of these technologies in urban planning, sustainability, and the future of construction, highlighting the importance of collaboration and data sharing in the industry. Guest: Chris Jackson Global Business Development - AEC, Esri Jonathan Ng Global Sales Director, Hexagon Geosystems, UK Episode Highlights: Integrating Geospatial Context in Construction: Examining the shift from traditional building coordination to incorporating the environmental context. Chris Jackson's insights into the use of GIS technology in landscape and urban design. Esri's Evolution and Focus: Chris Jackson discusses Esri's journey from mapping natural environments to integrating GIS with BIM. Emphasis on sustainable design and collaboration among stakeholders. Hexagon's Data-Centric Approach: Jonathan Ng highlights Hexagon's transition from traditional mapping to a focus on geospatial data. Discussion on the importance of environmental context in construction planning. Challenges in Data Collection and Mapping: Addressing the need for improved data collection technologies for above and below ground. Exploration of drone and satellite technologies in mapping difficult terrains. Sustainability and Safety in Modern Construction: How new technologies are being used to reduce costs, enhance safety, and lower carbon footprints. Real-world examples of technology applications in construction projects. Future of Geospatial Technology in Urban Planning: The vision of interconnected geospatial data aiding informed urban development decisions. The concept of digital twins and their role in understanding the built environment. Collaboration and Data Sharing Challenges: The necessity for greater collaboration and open data sharing among architects, engineers, and planners. Discussion on mindset shifts essential for sustainable urban development. The role of geospatial technologies in construction and urban planning is increasingly central, marking a significant shift towards integrating environmental considerations into building and infrastructure projects. Advanced GIS and BIM technologies are transforming these fields, emphasizing the importance of accurate and comprehensive data collection, particularly in complex environments. This evolution enhances project efficiency, safety, and sustainability. Collaborative efforts and open data sharing are becoming vital for innovation and responsible development in the industry, paving the way for a more interconnected and sustainable approach to urban infrastructure and design.

In this episode, Cody Whitelock engages with Gary Cowan and Gabe Paez to discuss the impact of XR (Extended Reality), AR (Augmented Reality), and VR (Virtual Reality). They discuss the significant impact of these technologies in construction and digital design. Gary Cowan brings his experience from implementing XR in construction projects at Kane Group, while Gabe Paez from Autodesk speaks about the integration of XR into digital platforms, focusing on enhanced design accuracy, improved stakeholder engagement, and safety in construction. The episode provides an insightful look into the transformative role of XR, AR, and VR in modern construction practices. Guest:  Gary Cowan Head of Digital Construction Kane Group Gabe Paez Head of Product, Autodesk Episode Highlights: Understanding XR/AR/VR in Construction: Definitions and differences between XR, AR, VR, and Mixed Reality. The impact of these technologies on design and construction processes. Integration of XR in Construction Workflows: Use cases in design review and constructability analysis. The role of XR in stakeholder engagement and project visualization. Safety and Practical Application on Construction Sites: Addressing safety concerns and practical challenges of using XR on-site. The balance between technological innovation and site safety. Role of AI and Advanced Analytics: The potential of AI in enhancing XR applications in construction. Analytical insights derived from XR technologies for better decision-making. Future of XR in Facility Management: Transitioning from construction to facility management using XR. The importance of data-rich models for effective maintenance and operations. Challenges and Future Directions: Discussing the hurdles in adopting XR in mainstream construction. The evolving role of AI in automating and optimizing construction processes. XR as a Tool for Training and Simulation: Using XR for immersive training and emergency response simulations. The benefits of XR in skill development and labour training in construction. The transformative impact of XR, AR, and VR in the construction industry play a significant role in enhancing design accuracy, improving site safety, and fostering better stakeholder engagement in construction projects. Beyond celebrating these advancements, there is an exploration of the practical challenges faced in integrating XR, AR, and VR. The potential for these technologies in the future, especially their deeper incorporation into construction and facility management practices, is a subject of keen interest. This evolving landscape of construction shows that digital innovation is becoming increasingly integral to successful project execution and management.

In this episode, Moritz Mombour and Ian Harding discuss the transformative impact of digital tools and planning in the construction industry. They highlight the shift from traditional methods to innovative approaches like BIM emphasizing the need for seamless integration and collaboration among various stakeholders. Their conversation explores the challenges and opportunities presented by digitalization, underscoring its role in enhancing efficiency, precision, and communication across all phases of construction projects. Guest: Moritz Mombour Head of Digital Planning - Dress & Sommer Ian Harding  BIM Section Head -Ireland Operations, Jacobs Episode Highlights: Evolution of Construction Processes: Transition from traditional CAD to modern BIM (Building Information Modeling). Challenges and benefits of integrating technology throughout the project lifecycle. The shift from technology-focused strategies to value-driven project delivery. Integrated Project Delivery (IPD): Collaborative approaches breaking traditional design and construction contracts. Importance of seamless integration and coordination among various stakeholders. Constructability and Coordination: Early involvement of construction teams in the design process. Emphasis on process efficiency, waste reduction, and aligning client expectations. Dynamic modeling and the challenges of information transition between design and construction phases. Use of Digital Tools in Construction: Laser scanning for progress verification and installation accuracy. Dealing with installation errors and their impact on project timelines and budgets. The role of digital twin technology in improving construction processes. Client Expectations and Project Delivery: The need for clear specifications and open communication for successful project outcomes. The role of clients in driving the adoption of advanced digital solutions. Data Analytics and Predictive Modeling: Utilizing historical data for improved project planning and execution. The potential of machine learning in enhancing construction processes. Modular Construction and Off-site Manufacturing: The trend towards modular building for efficiency and safety. Benefits of pre-fabricated components and controlled environment construction. The shift in construction towards a more integrated, technology-driven approach is marked by the widespread adoption of Building Information Modeling (BIM), Integrated Project Delivery (IPD), and various advanced digital tools. These developments collectively emphasize enhanced efficiency, collaboration, and value delivery in construction projects, showcasing a pivotal change in the industry's operational and strategic methodologies.

This episode explores the significance of digital twins in the construction industry, expanding into various other sectors. The conversation with Anand Mecheri and Richard Scott covers the evolution, application, and future potential of digital twins, highlighting the transformative impact of this technology. Episode Highlights: Guest: Anand Mecheri CEO ndBIM Virtual Building  Richard Scott Chief Partnership Officer  at Twinview Limited Role of Digital Twins in Construction: The transformation from simple digital models to complex, intelligent systems. Application across various industries, including construction, healthcare, and urban planning. Evolution of Digital Twin Technology: Transition from traditional methods to data-centric approaches. The importance of data quality in digital twin implementation. Challenges in Digital Twin Adoption: Overcoming industry resistance and changing mindsets. Integrating digital twins into existing workflows and processes. Operational Focus and Real-time Data Usage: Using digital twins for real-time performance monitoring and optimization. The role of digital twins in achieving net-zero energy goals. Interdisciplinary Collaboration and Stakeholder Engagement: The need for collaboration across different project stages and stakeholders. Challenges and strategies in fostering industry-wide adoption. Future Outlook and Economic Impact: Prospects of digital twins in driving innovation across sectors. Economic opportunities presented by the growth of digital twin technology. Data Management and Analytical Capabilities: The central role of data in driving digital twin efficiency. Leveraging analytics for informed decision-making. Integration with Smart Cities and Urban Planning: Digital twins in the context of smart city development and urban planning. Potential impacts on city-scale infrastructure and management. Industry Evolution and Continuous Learning: Adapting to rapid technological changes in the construction industry. The importance of continuous learning and skill development. The critical role of digital twins in the construction industry and beyond is unmistakably transformative, signalling a shift towards more efficient, data-driven methodologies. Evolving from basic models to complex, intelligent entities, digital twins are pivotal in enhancing efficiency, fostering innovation, and driving industry-wide change. Their impact, spanning from operational optimization to net-zero energy goals, requires embracing technological advancements, fostering interdisciplinary collaboration, and continuously adapting to new challenges.

This episode features a dynamic discussion on the evolving landscape of technology in the design and construction industry, focusing on the integration of digital tools, the importance of soft skills, and the challenges of technological adaptation. Guest: Carolina Fong Guzzy Digital Engineering Manager at Accienta  Argelica Barcena Northwest Regional Design Tech Manager  at Gensier Episode Highlights: Role of Design Technology: Importance of combining design and technology skills in the construction industry. The gap between educational training and industry needs. Evolution of Talent Acquisition: Challenges in hiring and retaining talent amid rapid technological advancements. The necessity of a self-learning mindset in the industry. Impact of Cloud Technology: The significant role of cloud technology in enhancing collaboration and efficiency. How the pandemic accelerated the adoption of cloud-based collaboration. Contractual Challenges and Digital Transformation: The need for dynamic contractual frameworks to accommodate evolving technologies. Discussion on integrating new technologies into existing contractual models. Operational Challenges in Cloud Collaboration: Exploring the difficulties in maintaining and updating project models across different project phases. Digital Tools and Process Evolution: Potential future developments in digital tools and processes in the construction industry. Emphasizing the critical role of data management. Soft Skills and Continuous Learning: The importance of soft skills in complementing technological proficiency. The role of curiosity and innovative thinking in exploring solutions. Challenges in Digital Twin and Data Management: Discussion on the future role of digital twins in construction. The potential challenges and opportunities in model management post-completion. Interoperability and Data Sharing: The need for interoperability in construction technology. Challenges related to intellectual property and data sharing among stakeholders. Urban Planning and Smart Cities Integration: How urban planning and smart city concepts are merging with modern construction technologies. Importance of Design Phase: The critical role of the design phase in construction projects. The need for sufficient time and resources for design teams. Adapting to Educational and Technological Changes: The necessity for ongoing learning and adaptation to new technologies in the construction industry. Collaboration, innovation, and embracing technological changes are essential elements in the design and construction industry. The imperative for the industry to adapt and evolve continually is crucial to meet the challenges presented by a rapidly changing technological landscape, ensuring sustained growth and relevance in an increasingly digital and interconnected world.

In this episode, Carl Storms, a technical solutions lead with extensive experience in Building Information Modeling (BIM), joins Cody Whitelock for an in-depth discussion on the transformative role of BIM and collaborative technologies in the construction industry. They explore various aspects of how these technologies are reshaping the field, from education to practical application and future trends. Episode Highlights: Educational Pathways in Construction: Carl discusses the benefits of trade school education over traditional university paths, highlighting its technical focus and industry relevance. Bridging the Gap Between Education and Industry: The challenges fresh graduates face in applying theoretical knowledge to practical industry scenarios. Importance of understanding real-world limitations despite the capabilities of modern software. Evolution of Design and Construction Software: Integration of AI in construction software. The shift from teaching specific software tools to focusing on problem-solving and workflow understanding. Generative Design and Its Implications: How generative design can explore thousands of solutions, moving from overwhelming options to focused, relevant ones. The potential of these technologies to improve decision-making in the design phase. Collaboration Versus Coordination in Construction Projects: Emphasis on voluntary collaboration in the industry for overall project improvement. The need for early involvement of all parties in a project for optimal outcomes. The Role of Digital Twins and Data Management: Discussion on the future of model management post-project completion. The potential of digital twins in effectively utilizing data accumulated in project models. Interoperability and Data Sharing Challenges: The importance of data interoperability in the industry. Challenges in sharing intellectual property and project data among different stakeholders. Future of Urban Planning and Smart Cities: How urban planning and smart city concepts are being integrated with modern construction technologies. The potential for these technologies to improve city infrastructure planning and maintenance. The Importance of the Design Phase in Construction Projects: Discussion on the critical role of the design phase and the need for sufficient time allocation for design teams. Educational and Technological Adaptation in the Industry: The necessity for continuous learning and adaptation of new technologies in the construction industry. The integration of BIM and collaborative technologies in the construction industry represents a fundamental shift towards more efficient, precise, and sustainable building practices, rather than being merely a passing trend. This transformation is underscored by the industry's growing reliance on technological advancements and data-driven approaches. The future of construction is increasingly defined by its capacity to adapt to new technologies, harness the power of data effectively, and cultivate a culture of collaboration and continuous learning. Industry professionals, educators, and students are encouraged to actively engage in this transformative process. Their collective efforts and willingness to embrace innovation are pivotal in shaping the future landscape of construction, steering it towards greater efficiency and resilience.

In this episode, Anne Carpenter and Jason Peters offer us a comprehensive look at the evolving role of BIM in the AE) industry. The discussion focuses on the current state and future trajectory of BIM education, its integration with cutting-edge technologies, and the overarching impact on the AEC sector. Episode Highlights: Diverse Adoption Levels of BIM: Examination of varied BIM adoption rates across companies. The critical importance of staying updated with the latest in software and technology in AEC. Challenges in Training and Education: The dual focus on software and hardware learning in the AEC industry. The pivotal role of leadership in fostering a continuous learning environment. Streamlining Projects with BIM: BIM is a catalyst for efficient project management and enhanced collaboration. Emphasis on the necessity for consistent practices in utilizing BIM tools like Revit. Evolving Career Dynamics in AEC: The contrast and integration of technology-centric roles with traditional AEC career paths. The imperative of upskilling to stay relevant in the face of industry evolution. Management and BIM Integration: Challenges faced by managers in blending BIM tools with existing workflows. The balance between technical know-how and managerial acumen. Role of Autodesk and Training Complexities: Addressing the learning curve associated with Autodesk products. Discussion on popular training programs and the underutilization of certain tools. Leadership and Soft Skills in AEC: The importance of developing leadership qualities and effective communication skills. The challenge of bridging the generational gap between tech-driven and experienced professionals. Future Trends in BIM and AEC: The evolving role of BIM in contractual documentation. The potential of digital twins and data integration for enhancing project efficiency. Vision for an Integrated AEC Future: Imagining a future where AEC projects contribute to interconnected urban ecosystems. The need for a collaborative and holistic approach in construction and design. The future of the AEC industry is firmly anchored in the integration of Building Information Modeling (BIM) and emerging technologies. This integration marks a decisive shift towards a more interconnected, efficient, and technologically advanced approach in construction and design. It is evident that adaptability, continuous education, and collaborative efforts are essential in shaping an innovative and sustainable AEC landscape. This transformation transcends mere trend status and emerges as a crucial evolution, vital for meeting the complex demands of modern construction and urban development.

In this podcast, we delve into the transformative landscape of the construction industry, driven by technological innovations and new planning strategies. Our guest, Javier Glatt, a former athlete turned construction industry trailblazer, shares valuable insights into this ongoing evolution. Together with an engineer from Frank Gehry's architectural firm, he co-founded a startup that gave birth to cmBuilder, a groundbreaking tool addressing the demand for advanced construction technologies in today's world. Episode Highlights: Bridging Technological Gaps: Historically, construction relied on 2D planning and physical site visits. Urban settings and administrative challenges amplified the complexities. Today, 3D visualization and tools like cmBuilder provide immersive solutions. Simulating logistics in a 3D environment facilitates visualization and offers insights into foundational techniques. The Pivotal Role of 3D Technology: 3D technology offers a holistic view of projects. Anticipation of potential issues, e.g., tree removal feasibility. Drones provide quick site inspections, enhancing construction accuracy. Clients now seek contractors using technological tools for seamless planning and coordination. Interconnected Construction Tools: Holistic project understanding is crucial. Comprehensive planning aids in spotting potential clashes and intricate urban settings. Safety and noise regulations require precise data for rigorous planning. Embracing Reality Capture: Technologies like drones, seismic imagery, and 360-degree imaging offer real-time site insights. Shift from static planning to dynamic, real-time approaches. Integration of data from various sources minimizes risks and keeps projects on track. Machine learning and computer vision technologies offer real-time monitoring and tracking. Uncovering What Lies Beneath: X-ray scanning and subsurface utility engineering (SUE) help in preemptively addressing subsurface challenges. Mapping underground utilities with precision enhances planning accuracy. The rise of digital twins promises unprecedented insights into subsurface conditions. Machine Learning and Computer Vision: Cameras equipped with machine learning capabilities track site objects and materials. Optimizing space and resource allocation through accurate 3D models. Software solutions streamline planning, minimizing redundancies and facilitating resource adjustments. The Educational Aspect: Continuous learning initiatives bridge traditional practices with tech-driven  methodologies. Catering to a broad audience, from construction professionals to software developers. Feedback loops refine industry tools and techniques. The future of the construction sector is inextricably linked with technology. Adaptability, collaboration, and continuous learning are key drivers of this industry's evolution. Efficiency and innovation converge as the construction industry embraces new tools, methodologies, and a commitment to excellence. Check out Evercam's Reality Capture platform: evercam.com Follow Evercam on social media: Twitter: twitter.com/evrcm Instagram: instagram.com/evercam_ YouTube: youtube.com/c/Evercam LinkedIn: linkedin.com/company/3496340

BIM Heroes Podcast Episode 3: State of Laser Scanning - Visual Twin vs Digital Twin In this episode of the BIM Heroes Podcast, host Cody Whitelock, a VDC virtual construction manager at Barnhill Contracting, delves into the dynamic world of laser scanning and reality capture. Joined by industry experts Kip Ivey, Senior Business Development Manager for Faro Technologies, and Anton Marinovich, Vice President of Sales at Evercam, they explore the evolving landscape of construction technology and its impact on the industry. Understanding Visual Twin and Digital Twin: Explore the distinctions and applications of Visual Twin and Digital Twin platforms, such as Holobuilder and Evercam. Learn how these platforms provide a visual representation of construction site progress and holistic asset management. The Evolution of Construction Technology: Delve into the transformative journey of technology in the construction industry, highlighting the integration of laser scanning, 360-degree cameras, mobile mapping, and terrestrial LiDAR scanning, and their impact on data capture and utilization. Unlocking the Power of Fixed Live Feed Cameras: Uncover the potential of fixed live feed cameras beyond traditional security purposes, and how they contribute to comprehensive data fusion, real-time monitoring, incident response, and quality control on construction sites. Data Fusion for Enhanced Value: Understand the significance of data fusion in construction technology, combining diverse datasets like live feed footage, 360 photos, 3D scans, drone imagery, and BIM models to optimize operations, improve safety, and make informed decisions throughout the project lifecycle. Harnessing the Power of AI: Explore how artificial intelligence (AI) analyzes reality capture data, detects anomalies, and enhances safety and project efficiency, all while complementing human expertise and optimizing workflows in construction. The Future of Reality Capture: Envision the future of reality capture technology, emphasizing its integration with AI-driven analytics and other datasets to facilitate efficient planning, reduce errors, and provide invaluable insights into project success and failures. Listen to the BIM Heroes Podcast on: Spotify: http://evr.cm/JzUl Apple: http://evr.cm/ZzPn YouTube: http://evr.cm/BzTT Show Highlights:

In the evolving digital landscape of the Architecture, Engineering, and Construction (AEC) industry, reality capture technology is making waves. The promises it offers are tremendous – from enhanced efficiency and collaboration to a new dimension of project planning. Yet, with advancements come challenges, especially in terms of acceptance and understanding. In this episode, Marco Herbst from Evercam, a pioneer in the reality capture domain, and seasoned land surveyor Matthew Byrd shed light on how this technology is revolutionizing the AEC industry and the steps needed to fully embrace its potential. In our conversation, we delve into: 1. The Transformation with Reality Capture: Understanding how reality capture is not just a fad but a paradigm shift in the industry, making tools more affordable, user-friendly, and equipped with real-time data capabilities. 2. Data Utilization Over Acquisition: The historical significance of data acquisition in the AEC sector and how companies like Evercam are ensuring that this enormous amount of data is not just acquired but effectively utilized. 3. Knowledge Sharing as Empowerment: Addressing the skilled labor shortage in the industry and the commendable efforts by companies to democratize the understanding of reality capture, enhancing productivity and innovation. 4. Weathering the Storm with Real-time Decision Making: A look at how reality capture is mitigating long-standing challenges like weather-related disruptions, enhancing planning software, and ensuring reliable project execution. 5. The ROI of Reality Capture: As firms grapple with understanding the tangible returns on reality capture, we discuss the undeniable benefits in averting design issues and cost overruns. 6. Methods Redefining AEC Practices:     - Construction Cameras: Moving beyond mere recording to project oversight.     - Laser Scanning: Its indispensable role in reality capture.     - Drones: Offering unique data collection capabilities that traditional methods can't match.     - Lidar's Role: Beyond topographic surveys to an expansive AEC application.    - 360-degree Photography and AI: How combining these is revolutionizing visual data analysis.     - Enhanced Surveying with Total Stations: The perfect blend of traditional techniques and modern tech.    - Diving Deep with Side Scan Sonar: Illuminating the underwater world in ways previously unimaginable. 7. The Catalyst - Reality Capture Network (RCN): How platforms like RCN are accelerating education, collaboration, and community-building in the realm of reality capture, with a special spotlight on Matt Bird's contributions. 8. The Road Ahead for AEC: As reality capture becomes an integral part of AEC, what does the future hold? A comprehensive look at the exciting journey towards a data-driven, intricately efficient built environment. This episode of the BIM Heroes Podcast offers a deep dive into how the AEC industry is getting intertwined with reality capture, ensuring a future that's efficient, innovative, and seamlessly integrated.

In this digital era, the future of the construction industry is not simply about the introduction of new technologies but rather about how these technologies are utilised and understood. The industry is becoming more interconnected, with forums and summits playing a pivotal role in nurturing communities that encourage learning, collaboration, and adoption of technologies. From understanding the complexities of the tech landscape to breaking down functional silos; these platforms are fostering change and driving digital transformation.  In the first episode, our host Cody Whitelock, a VDC virtual construction manager at Barnhill Contracting, is joined by Ralph Montague, a seasoned architect, and Vinnie Quinn, co-founder of Evercam. Together, they talk about the pivotal role of community, learning, and collaboration in shaping the digital transformation of the construction industry. In this episode, our host and guests discuss the following: The overload of technology in the construction industry, and how adopting and integrating new tools into workflows can enhance productivity and reduce costs. The power of community in overcoming the challenges of digital transformation, featuring examples like the BIM Coordinators Summit. The challenge of functional and technological silos in the construction industry, and how breaking them down can enhance coordination and efficiency. The importance of mentorship in onboarding and training staff in new technologies The use of modern technology to transform traditional mentorship, allowing knowledge and information to be shared on a global scale. The concept of treating each project as a digital prototype for the next to foster continuous improvement. The future of construction, focusing on how we use technology to drive change and improve outcomes. While the construction industry is inundated with new technologies such as Building Information Modeling (BIM), reality capture, prefabrication, modular construction methods, drones, wearable technologies, and Internet of Things (IoT) devices, understanding how to use these tools effectively, such as using reality capture not only for training and mentorship but also for best practices on site, is critical to reap their benefits. The pivotal role of 'BIM Heroes' as change agents is emphasised, showcasing how digital transformation encompasses people, processes, and culture. Tune in to this episode of the BIM Heroes Podcast for an in-depth discussion on how learning, collaboration, and community can harness the power of technology to drive change and enhance outcomes in the construction industry. Check out Evercam's Reality Capture platform: https://evercam.com/ Follow us on Social Media: Twitter: https://twitter.com/evrcm Instagram: https://www.instagram.com/evercam_/ YouTube: https://www.youtube.com/c/Evercam LinkedIn: https://www.linkedin.com/company/3496340/