The Pro Audio Suite

This week, it's all about the front end — microphones for voiceover. George recently ran a live webinar comparing a wide range of mics from the Audio-Technica AT875R to the mighty Austrian Audio OC818, and we're diving deep into the results. From self-noise to low-end roll-off, polar patterns to punchy midrange, we break down what makes a great mic for VO, including:

This week on The Pro Audio Suite, we dig into the lab-tested results of our very own PASport VO, the portable audio interface designed for voice talent and podcasters. George took it to a respected LA repair shop for an independent bench test, and the results? Minus 89 dB of self-noise. Translation: it's dead quiet. The Jasmine™ preamps inside impressed the pros, even when compared to far more expensive gear. And the design? Tough, tiny, and travel-ready. But here's the kicker: unless there's enough demand, there won't be another production run. If you missed out the first time, now's your chance to change that. We want this thing back in production, and Michael at CEntrance needs to hear it from you.

This week, it's just AP and Robbo flying the plane—and they're kicking around an idea that's been brewing for a while:

This week on The Pro Audio Suite, we're joined by Matthew Kleiman from Kit Plugins and the newly developed NoiseHub. We dive into the current plugin landscape, what makes Kit Plugins stand out, and how NoiseHub is aiming to change the way audio professionals collaborate and manage assets. Join George ‘The Tech' Whittam, Robert Marshall, Darren ‘Robbo' Robertson, and Andrew Peters as they explore the tools and trends shaping the audio post-production industry today. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here.. https://www.patreon.com/proaudiosuite George has created a page that is strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

Award-winning voice actors Cissy Jones and Larissa Gallagher have seen their voices stolen by AI. Literally. In this hard-hitting episode of The Pro Audio Suite, they join us to share the shocking reality of finding their voices on AI platforms — being sold, shared, and synthesized without consent or compensation. But they're not just here to sound the alarm — they're here with solutions. We dive into: How they discovered their voices were being used The legal and ethical grey areas of AI voice cloning Their fight for control through advocacy with NAVA (National Association of Voice Actors) The groundbreaking tech tools being developed to protect voice actors What YOU can do to secure your voice and future Whether you're a voice actor, producer, or just someone who cares about consent in the age of AI, this is a must-listen. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here.. https://www.patreon.com/proaudiosuite George has created a page that is strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

What's the weirdest direction you've ever received in a session? "Read it more magenta"? "Give me rage, but lean toward anger"? "Sound like a potato"? In this week's episode of The Pro Audio Suite, Robbo, AP, George, and Robert dive into the hilariously bizarre world of VO direction that makes absolutely no sense… and yet somehow still happens every day. Pulled straight from Robbo's viral LinkedIn thread, this episode is packed with laugh-out-loud moments, real-life war stories, and a bit of therapy for anyone who's ever heard: “That was perfect. Let's do one more.”

This week, The Pro Audio Suite breaks tradition — and smashes a few stereotypes along the way — as we welcome Christy Harst to the show. Christy is a voice actor and founder of Building Doors, a grassroots movement dedicated to creating opportunities for women in male-dominated sectors like sports, automotive, gaming, and tech voiceover. After years of hitting roadblocks, Christy decided to stop waiting for the industry to change — and started building her own doors. In this wide-ranging, real, and sometimes confronting conversation, we dive into: The harsh realities facing women in promo and commercial VO today Why even major brands are missing huge opportunities by ignoring female voices The importance of representation in creating real cultural change How grassroots support — a like, share, or tag — can directly impact a voice actor's career Christy's global plans for Building Doors, including expansions into Australia, Egypt, and the UK The Pro Audio Suite proudly stands behind Building Doors and its mission. If you believe in a more inclusive, forward-thinking voiceover industry, you can help in three simple ways:

Title: NAB 2026 Recap: Booths, Bridges & Broadcast Breakthroughs Description: We're back from NAB — well, two of us are! George and Robert hit the Las Vegas show floor to scope out the latest in broadcast tech, while AP and Robbo keep the audio nerd banter flowing. In this episode: A deep dive on ultra-high-end ISO booths like MECART and the pros/cons of serious soundproofing The rise and practicality of Cousteau Block acoustic systems The origin story of SourceConnect and how it revolutionised VO and remote workflows The surprising legacy of SourceNexus, and how it changed Robbo's day-to-day life Wild stories: $13K calls to Cuba, ISDN blunders, and cruise ship mishaps Why the PASport VO is the modern answer to overpriced Comrex units Whether you're reminiscing about ISDN or eyeing off your next mobile rig, this one's packed with insights, laughter, and enough gear talk to fill a Pelican case.

In this week's video episode of The Pro Audio Suite, AP's got his ears on the new Audio-Technica R70xA headphones, and the team dives into a full-blown can convo. He shares his first impressions after two weeks of use — lightweight, comfy, and eerily similar in tone to the Hi-X65s. But how do they really stack up against other studio staples like the KRKs, Austrian Audio Hi-X55s and 65s, Sennheiser HD280s, and even some vintage Audio-Technica ATH2s? From comfort and design quirks (hello magnetic straps and mystery cables) to 470-ohm impedance madness, gear abuse stories, and which cans sound great but feel like a head clamp, this is one juicy headphone shootout. Bonus: George nerds out on impedance math, Robert gets officially certified as “professional grade,” and an AKG suffers a tragic fate at VO Atlanta...R70xA Headphones – Worth the Hype?

In this episode, we dive into one of the biggest and most talked-about voiceover events on the planet — VO Atlanta. Andrew, George, Robbo, and Robert break down the experience from every angle: Is it still the king of VO conferences? What's changed post-pandemic? Who should (and maybe shouldn't) be booking flights for next year? The good, the bad, and the “interesting” from this year's event Tips for getting the most out of VO Atlanta if you go in the future Plus, a little side chat about conferences in general — when are they worth it, when are they not, and how they could be better. Oh, and don't miss the usual dose of questionable humour, honest takes, and hard-earned industry insight.

This week's episode of The Pro Audio Suite dives headfirst into the world of budget audio gear, exploring whether cheaper equipment has actually improved or if it's still just average kit with fancy marketing. Here are some key highlights and insights from the discussion: Budget Gear: Better or Still Rubbish? Robustness & Quality: The crew revisits the Rode NT1's evolution—from early plastic models to today's sturdy iterations. They ponder its surprising collectability today. User-Friendliness: A cheeky chat unfolds about how budget gear manufacturers should assume nothing when it comes to user knowledge, advocating for painfully obvious product instructions, especially with mics like Rode's NT1. Headphones: Still the Achilles Heel? Consensus emerges around headphones as one area where low-budget options haven't improved as dramatically as microphones. The crew reckons that decent studio cans rarely dip below the $100 mark without significant compromises in sound and build quality. Austrian Audio gets a shout-out for their entry-level headphones offering decent quality, but it's noted that paying a little more generally delivers much better audio. Interfaces and Converters: Robbo's downsized rig is highlighted, having moved from larger interfaces to compact solutions like the SSL2 and the Centrance PASport VO. An important insight shared is that cheap interfaces often share internal converter chips with much pricier gear, meaning the sonic differences can be surprisingly subtle. Bargain Finds and Bargain Fails: Andrew points out the rise in cost of entry-level interfaces from brands like Focusrite, thanks to feature-creep. The group chats about bargain-basement gear flooding Amazon, discussing surprising finds like a $30 dual XLR-to-USB-C interface cable. Robbo humorously advises caution, noting that certain inexpensive gear—particularly cables and mic arms—can still be absolute rubbish. Chinese Clones and Cheap Accessories: George brings up affordable Chinese-made hardware like camera mounts and mic arms, now significantly cheaper yet surprisingly robust compared to premium brands. The "magic arm" clamp is a notable budget win. However, the consensus firmly recommends against skimping on headphones and cables. Quality connectors from Neutrik and Mogami cables are touted as essentials worth investing in. Plug-ins: Stock vs. Premium vs. AI Debate surrounds stock plug-ins vs premium offerings, questioning the necessity of higher-priced plug-ins from brands like FabFilter. Healthy skepticism about AI-enhanced plug-ins and noise reduction is expressed, particularly regarding Adobe Podcast's AI noise reduction. Emulators & Mic Modeling: Opinions split on whether mic emulation is beneficial or just a feel-good factor. Townsend Sphere and Antelope Audio's mics spark a conversation about whether emulated models truly rival their inspirations. Final Thoughts: Cheaper gear today often does punch above its price tag compared to the past, especially microphones. But there remain clear lines where quality is non-negotiable (headphones, connectors, and build quality in general). Ultimately, the episode reinforces the idea that good engineering practice and knowledge still win the day, regardless of budget constraints. It's another lively, opinionated, and informative chat from Robbo, Andrew Peters, George "The Tech" Whittam, and Robert Marshall, brought to you by their sponsors Tribooth and Austrian Audio. If you're keen to catch the full flavour and all the banter, check out the episode at theproaudiosuite.com. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page that is strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson  

We're back with Derek Bargaehr, co-founder and chief designer at Vanguard Microphones, for Part 2 of our deep dive into the world of boutique microphone design. In this episode, Derek opens up about what really drives sound quality — from component selection to the subtle tweaks that can make or break a mic's character. We also get into the realities of manufacturing in today's world, and why Vanguard is so passionate about keeping the ‘human touch' in their mics. If you love gear talk and want to know what separates the good mics from the great ones, don't miss this. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page that is strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson  

In this first part of our two-part interview with Derek Bargaehr, co-founder and chief designer at Vanguard Microphones, we dig into the nuts and bolts of what goes into designing a modern microphone that stands out in a crowded market. From capsule choices to ribbon designs, Derek gives us the lowdown on how Vanguard approaches innovation, sound quality, and the all-important ‘vibe factor' every engineer is chasing. Whether you're a gear junkie, a home studio tragic, or a working pro wondering if that next mic purchase should have a Vanguard badge on it, this is the episode for you. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page that is strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson  

This week on The Pro Audio Suite, it's down to just AP and Robbo as they dive into a hands-on session showcasing the PASportVO—the ultimate audio interface designed specifically for voice actors and podcasters. In this special video episode, the guys demonstrate exactly how easy it is to set up and use the PASportVO for crystal-clear two-way podcast interviews and directed voiceover sessions with clients. From connection tips and best practices to a live demo of its seamless functionality, this episode is packed with practical advice to elevate your remote recording game. Check out the video version on our YouTube channel to see the PASportVO in action! A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page that is strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson  

In this episode of The Pro Audio Suite, we sit down with one of the most recognizable voices in the industry—David Kaye. Whether you know him as Optimus Prime, the voice of countless movie trailers, or his extensive video game and animation work, David's journey is one for the books. From his radio roots to discovering the power of simply being himself behind the mic, David shares invaluable insights into the craft of voice acting, the evolution of home studios, and the unexpected lessons he learned along the way. We talk character voices, the nuances of delivering an authentic read, and why sometimes the best performance comes from doing nothing at all. This one's a masterclass in voiceover wrapped in great stories, laughs, and a little nostalgia.

Ever wondered how to get the absolute most out of the PASport VO? This episode of The Pro Audio Suite is your deep dive into everything you need to know about setting up, optimizing, and troubleshooting this powerhouse of an interface. From default settings and compressor behavior to multi-computer setups and even game streaming, we break it all down. Whether you're a voice actor, podcaster, or producer, this guide ensures you get the best audio possible with your PASport VO. In this episode, we cover:

In this episode, we're diving deep into the evolution of the Tribooth with the one and only Rick Wasserman from Bookable. He's not just a co-founder; he's the mastermind behind the design. Rick joins us to spill the beans on Tribooth's latest innovations—including the Tribooth Transform and a mystery new product, tentatively dubbed "The X." We cover everything from booth transformations (literally!) to accessibility features for wheelchair users, and even how to set up your mobile VO rig on the go. Plus, there's talk of Vespa-friendly recording setups, makeshift urinals (yep, that happened), and why Rick's proudest moment involved a power chair and some serious booth design breakthroughs. If you're curious about travel-friendly voice booths, recording from a loveseat, or the art of booth design that fits in a carry-on, this one's for you!

The Pro Audio Suite crew takes you inside NAMM 2026!

In this episode, the team dives into the latest updates on the PASportVO – the game-changing audio interface designed for voice actors and podcasters. The units have arrived in Chicago and are being tested, calibrated, and packed for shipping. If you ordered one, your PASportVO is on the way!

In the first episode of Series 8, we explore the big news: Austrian Audio has been acquired by DPA. We dig into what this means for audio gear lovers, with our usual tangents on microphones, recording tips, and more. Thanks to our sponsors: Tri-Booth (not Tribush!) and Austrian Audio. Dive in for everything audio professionals need to know in 2025. Big thanks to our sponsors: Austrian Audio – Making passion heard. Check out the Hi-X20 headphones: Austrian Audio Hi-X20 Tribooth – The portable vocal booth that fits in a suitcase. Use code TRIPAP200 for $200 off! A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

This week on The Pro Audio Suite, we dive into the fascinating—and sometimes frustrating—world of AI noise reduction. From Descript's Studio Sound to Adobe Podcast's quick-fix tools, we explore how these AI-driven solutions are shaking up audio post-production. What works? What doesn't? And when do these tools cross the line from helpful to downright hallucinating? Join Robbo, George, Robert, and Andrew as they unpack real-world examples of AI audio gone right—and hilariously wrong. Plus, we talk about best practices for using these tools without sacrificing natural sound. Big thanks to our sponsors: Austrian Audio – Making passion heard. Check out the Hi-X20 headphones: Austrian Audio Hi-X20 Tribooth – The portable vocal booth that fits in a suitcase. Use code TRIPAP200 for $200 off! A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

This week on The Pro Audio Suite, it's time to crown the winner of our epic mix competition in partnership with Austrian Audio! We're joined by Kurt Richter, the mastermind behind the Hi-X20 headphones, for an in-depth chat about what makes these cans a game-changer. Kurt spills the beans on Austrian Audio's design philosophy, the evolution from the Hi-X15 to the Hi-X20, and how pro feedback shaped their signature sound. Plus, we break down what set our finalists apart and why the winning mix took the top spot. Was it the perfect timing? The blend? Or that touch of magic that made it unforgettable? You'll have to tune in to find out! Missed out on the prize? Don't worry—experience the pro-level sound yourself with a pair of Hi-X20s!

This week, we've got a surprise Black Friday Special for you! Forget our usual Tuesday release; today, we're diving into the juiciest audio deals and some gold-standard advice for voiceover demos. From George sharing insider tips on memberships and exclusive discounts at George The Tech, to Robbo breaking down his Black Friday demo deal, it's a full table of offers, insights, and laughs. Robert also spills the beans on Source Elements' jaw-dropping discounts. If you've ever thought about upgrading your home studio setup or refining your VO game, this is the episode you've been waiting for. Plus: Robbo shares how his process creates world-class demos that land talent major gigs. Learn why listening is the secret sauce to crafting the perfect voiceover demo. Behind-the-scenes stories of VO pros, acting challenges, and gear tips galore. Sponsors: Tribooth: $200 off with code TRIPAP200. Austrian Audio: Making passion heard with their industry-leading gear. Hashtags: #ProAudioSuite #BlackFridayDeals #VoiceoverDemo #AudioGearDiscounts #VOProTips A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

In this episode of The Pro Audio Suite, we're diving into the top finalists of the Austrian Audio Mix Competition! With the Hi-X20 headphones up for grabs, we put the spotlight on creativity, production quality, and technical brilliance. Join us as we break down the submissions, highlight standout moments, and get ready to send our top picks to Austrian Audio for the final judgment. Don't forget to check out the latest from our sponsors, TriBooth and Austrian Audio, and grab your exclusive discounts! Topics Covered: Top 10 Finalists for the Mix Competition What Makes a Great Mix: Creativity vs. Technical Mastery Spotlight on Austrian Audio's Hi-X20 Headphones: Built for VO Pros The Future of Competitions on The Pro Audio Suite Sponsors: TriBooth: $200 off with code TRIPAP200 Austrian Audio: Hi-X20 – Making Passion Heard Join the Conversation:

This week on The Pro Audio Suite, we chat about the origins of the TRi Booth, a game-changing portable studio for voiceover pros. George 'The Tech' Whitham breaks down the challenges of creating a booth that balances acoustics, portability, and design. Learn how the TRi Booth came to be, why it uses a triangular design, and the process of optimizing materials for acoustic performance. We also explore the practical implications of using the TRi Booth in hotels and how it handles real-world noise scenarios. Don't miss our discussion on potential rental models and the future of portable recording setups. Connect With Us: Join our Facebook Group Visit our Website Subscribe on YouTube A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

In this episode, Robbo, George, AP, and Robert Marshall take a deep dive into Waves' newest AI-driven plugin: Waves Curves Equator. It's an innovative EQ that analyzes your audio and creates custom EQ curves based on what it “hears.” We break down its features, test it on Andrew Peters' voiceover, and explore how it could change the way we handle EQ. Discussion highlights: How AI EQ works and its real-world applications Robbo's first impressions using Waves Curves Equator Automating EQ for radio imaging and other applications Will AI-driven plugins take over more of the audio workflow? We also explore some fun presets and discuss how AI might shape the future of audio production. Episode Links: Tribooth Discount Code: Use TRIPAP200 for $200 off Austrian Audio: Proud sponsor of the show Source Elements: Making remote production seamless Competition Alert! Submit your mix for a chance to win a pair of Austrian Audio Hi-X20 headphones. Whether you're a beginner or a pro, just have fun with it! Full details at www.proaudiosuite.com/win. See the video version of this episode here: https://youtu.be/kYbc9Dzz2yQ Show Notes Links: Enter the Austrian Audio Hi-X20 Headphone Giveaway Download the show stems and submit your mix Connect With Us: Join our Facebook Group Visit our Website Subscribe on YouTube A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

In this audio episode, the team dives deep into the latest offering from Austrian Audio—the Hi-X 20s headphones. Discover how these cans stack up against the Hi-X 15s and 55s and why they might be the perfect choice for voice actors, podcasters, and audio engineers. Hear real-world feedback from Robbo's wife, Tahnae, and explore the key features that make these headphones a must-have for anyone serious about audio production. Plus, find out how you can enter to win a pair!

In this episode of the Pro Audio Suite, the team dives into the ever-evolving landscape of AI and voice licensing, exploring the groundbreaking decision by James Earl Jones to license his voice to Disney. What does this mean for voice actors? And where do we draw the line between legal licensing and exploitation? We also discuss recent lawsuits surrounding AI voice replication, the ethical boundaries of using voices without permission, and what these changes could mean for the future of the industry. The conversation gets heated as Robbo, AP, George "The Tech" Whittam, and Robert Marshall debate whether AI voice replication is an opportunity or a looming threat. With insights from the legal world, current case studies, and expert opinions, this episode is a must-listen for anyone in the audio or voiceover industries. Want to get involved? We've got an exciting Austrian Audio Hi-X20 Headphone Competition running, and it's simple to participate! Download the show's stems and create your own mix for a chance to win. Head over to theproaudiosuite.com to grab the files and get mixing!

In this episode of The Pro Audio Suite, we're excited to announce an exclusive Austrian Audio Giveaway as part of our new Audio Mix Competition! Tune in as Robbo, Andrew Peters, George "The Tech" Whittam, and Robert Marshall share the details on how you can win a brand-new pair of the latest Austrian Audio headphones!

In Part 2 of our interview with Jim Edgar on The Pro Audio Suite, we dig even deeper into the world of voiceover setups. Jim walks us through the iterative process of improving your recording space, explains why foam might not be the best solution for sound treatment, and provides expert troubleshooting tips for common voiceover issues like mic placement, echo, and hollow sound. We also cover the importance of sound engineers and agents being involved in quality control and how to continually refine your space to stay competitive in the industry. Whether you're a seasoned pro or just starting, there are invaluable takeaways in this episode! A big thank you to our sponsors: Austrian Audio – making passion heard with their high-quality microphones and headphones. Learn more at austrianaudio.com. Tri Booth – your go-to for a portable and professional voiceover booth solution. Get $200 off your purchase with the code T-R-I-P-A-P-200 at tribooth.com. Key Talking Points (for Part 2): Why foam is often an overrated solution for sound treatment The iterative process of refining your voiceover space and setup Common mic placement mistakes and how to fix them How voiceover agents and engineers should play a bigger role in quality control Real-life examples of troubleshooting bad audio and improving sound quality How Austrian Audio Gear can elevate your voiceover recordings Tri Booth for portable soundproofing solutions A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

In this episode of The Pro Audio Suite, we're joined by Jim Edgar, a seasoned voiceover expert known for his work with Twisted Wave and his extensive experience in the voiceover community. Jim dives into the essentials of setting up a professional home studio, offering valuable insights into audio gear, microphone techniques, and troubleshooting common sound issues. Whether you're new to voice acting or looking to refine your audio setup, this episode covers everything from the importance of room treatment to key tools like Twisted Wave that can streamline your workflow. Jim also shares personal anecdotes, such as the challenges of learning how to listen critically and tips on how to avoid common mistakes in the recording process. Plus, stick around for a few humorous tangents about bike frames and microphones! We'd also like to thank our sponsors: Austrian Audio, making passion heard with their high-quality microphones and headphones. Check them out at austrian.audio Tri Booth, the ultimate portable vocal booth solution for voice actors. Get $200 off your purchase with the code T-R-I-P-A-P-200. Visit tribooth.com for more information. In Part 2, Jim Edgar returns to dive deeper into advanced techniques for voice actors, from improving room treatment to finding the right microphone placement. We'll also cover the common mistakes voice actors make and the steps to fix them. Key Talking Points: The basics of setting up a professional voiceover studio How to improve audio quality using simple tools The role of Twisted Wave in streamlining your recording process Jim's advice on choosing the right microphone and gear Common mistakes voice actors make with room treatment and how to fix them A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

In response to a listener question from Barry Burns (aka Big Bazza!), the Pro Audio Suite team breaks down their thoughts on the Rode NT2000 and its use for voiceover work. Whether you're a voice actor curious about this mic or just a fan of Rode gear, this episode offers some valuable insights and a healthy dose of gear talk. Topics Covered: Initial Impressions of the Rode NT2000: The crew discusses their experience with the Rode NT2000, diving into the build quality, sound characteristics, and versatility of this multi-pattern mic. Comparisons to Other Mics: How does the NT2000 stack up against mics like the U87 and the Austrian Audio OC818? George and Andrew give their take on whether the NT2000 is a real contender in the voiceover world. Strengths of the NT2000: The team highlights the mic's variable polar patterns, high-pass filter, and low noise floor, making it a solid choice for versatile studio setups. Durability Over Time: With over a decade of use in one Melbourne studio, the team talks about the mic's longevity and how well it holds up compared to other long-term staples in the voiceover industry. The NT2000's Unique Design Features: The discussion covers the adjustable pots on the NT2000 and why, despite their flexibility, they might not be for everyone. Should You Buy the Rode NT2000 for Voiceover? Andrew sums up his experience with the NT2000 and answers whether it's worth the investment or if you should look into alternatives like the Austrian Audio OC818. Listener Question: Barry Burns asked: “I have the Rode NT2000 but can't find much in the way of evaluations for it. Any thoughts on how it stacks up for voiceover work?” Our answer: We break down the pros and cons of the NT2000 in the context of professional voiceover and help Barry (and you) decide if it's a keeper. Special Thanks: A big shout-out to our sponsors, TriBooth and Austrian Audio, for making this episode possible. Subscribe and Stay Tuned: Enjoyed the episode? Subscribe to The Pro Audio Suite for more expert insights on microphones, audio production, and voiceover gear reviews. Don't forget to like, leave a review, and share with your fellow audio pros! Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson  

In this episode of The Pro Audio Suite, we delve into the intricacies of Match EQ techniques, exploring how to fine-tune the U87 vs. 416 microphones for different environments, and discussing the challenges of ADR in post-production. Whether you're a seasoned audio engineer or a voiceover artist, this episode is packed with valuable insights into the tools and techniques that can elevate your sound. Topics Covered: TriBooth and U87 vs. 416 Microphone Matching: George shares his latest experience setting up a TriBooth to match a U87 in a booth with a 416. Learn how close you can get using Match EQ and where traditional listening and tweaking still play a crucial role. ADR Challenges in Post-Production: Robbo and the team discuss the ongoing struggle of matching ADR lines with on-set dialogue, particularly when using different mics and recording setups. Discover the often-overlooked post-production work that ensures seamless audio transitions. The Importance of Mic Placement and EQ: The team emphasizes why proper mic placement should be your first move before reaching for the EQ. Get the source right to avoid relying on EQ as a crutch and ensure your recordings are as clean as possible. U87 vs. 416: Regional Differences and Industry Standards: The crew explores the regional preferences for U87 and 416 microphones, comparing the U87's popularity in New York to the 416's dominance in LA. Is the U87 truly the industry standard in Australia, or has the 416 taken over? The History and Iconic Status of the 416 Mic: A fascinating dive into the history of the 416 microphone, its role in the industry, and why it has become the go-to mic for so many voiceover professionals. Listener Question: A listener asks about using a ribbon mic for voiceover work in a home studio. Is it time for a new sound to take over from the 416? Gear Talk: Austrian Audio OC818: Andrew discusses his favorite mic, the Austrian Audio OC818, and why it hasn't left his desk since he got it. Is this the perfect mic for his voice? Pop Filter Woes in Voiceover Studios: A humorous yet important discussion on the state of pop filters in studios, and why a fresh one can make all the difference in your recordings. Special Thanks: A big shout-out to our sponsors, TriBooth and Austrian Audio, for their continued support of the show.   Subscribe and Stay Tuned: Enjoyed the episode? Subscribe to The Pro Audio Suite for more expert insights on voiceover microphones, Match EQ tips, and audio production techniques. Don't forget to like, leave a review, and share with your fellow audio enthusiasts! Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson  

In Episode 33 of The Pro Audio Suite, the team takes a nostalgic journey through the evolution of Digital Audio Workstations (DAWs). From the early days of DSP and WaveLab to today's industry standards like Pro Tools and Twisted Wave, our hosts share their personal experiences, favorite tools, and some of the quirkiest DAWs they've come across. Whether you're a seasoned pro or a curious newcomer, this episode is packed with insights, stories, and a few laughs about the DAWs that have shaped the audio production world. Tune in and join the conversation about where DAWs are headed next. Introduction: The team welcomes listeners and gives a shout-out to sponsors, Tribooth and Austrian Audio. DAW Origins: Robbo shares his first experience with DSP at Triple M in Brisbane, sparking a discussion on early digital mixing consoles. Evolution of DAWs: The crew discusses how DAWs have changed from the 90s to now, mentioning early tools like Magix Samplitude, WaveLab, and Cakewalk. Modern Favorites: A look at the DAWs the hosts currently use, including Pro Tools, Twisted Wave, and Audition. Unexpected Tools: The team talks about some of the more obscure DAWs and editors, like Akon Digital's DAW and RØDE Connect. Challenges with New DAWs: The hosts share the challenges of learning new DAWs and the comfort of sticking with familiar tools. Final Thoughts: Reflecting on the importance of mastering your tools and the potential future of DAWs. Sponsors: Tribooth: The best vocal booth for home or on-the-road voice recording. Use code TRIPAP200 for $200 off your Tribooth. Austrian Audio: Making passion heard. Credits: Hosted by Robert Marshall, Darren "Robbo" Robertson, George "The Tech" Whittam, and Andrew Peters Recorded using Source Connect Edited by Andrew Peters Mixed by Voodoo Radio Imaging Tech support by George "The Tech" Whittam Don't forget to subscribe to the show and join the conversation on our Facebook group. To leave a comment, suggest a topic, or just say g'day, drop us a note at theproaudiosuite.com. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

In this episode of The Pro Audio Suite, the team takes on a processing challenge. After AP shares a voiceover chain his client used on his voice during a session in Dubai, the crew dives into a comparison of different processing setups. From compression techniques to EQ adjustments, you'll hear how various approaches can make the same voiceover sound dramatically different. Whether you're a voiceover artist or a podcaster, this episode is packed with insights on refining your audio chain. Special thanks to our sponsors, Tribooth—your ultimate portable vocal booth—and Austrian Audio, where passion is made heard. Sponsors: Tribooth: The best vocal booth for home or on-the-road voice recording. Use code TRIPAP200 for $200 off your Tribooth. Austrian Audio: Making passion heard. Credits: Hosted by Robert Marshall, Darren "Robbo" Robertson, George "The Tech" Whittam, and Andrew Peters Recorded using Source Connect Edited by Andrew Peters Mixed by Voodoo Radio Imaging Tech support by George "The Tech" Whittam Don't forget to subscribe to the show and join the conversation on our Facebook group. To leave a comment, suggest a topic, or just say g'day, drop us a note at theproaudiosuite.com. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

In this episode of The Pro Audio Suite, the team dive into the recent updates to Audacity's compressor and limiter features. These changes have caused quite a stir, particularly among voiceover artists and podcasters who rely on Audacity for mastering their projects. George "The Tech" Whittam shares his insights on the updates, highlighting what works, what doesn't, and what it all means for your workflow. Plus, we discuss the frustrations that come with software updates and how to navigate them without pulling your hair out. Special thanks to our sponsors, Tribooth, and Austrian Audio, making passion heard. Sponsors: Tribooth: The best vocal booth for home or on-the-road voice recording. Use code TRIPAP200 for $200 off your Tribooth. Austrian Audio: Making passion heard. Credits: Hosted by Robert Marshall, Darren "Robbo" Robertson, George "The Tech" Whittam, and Andrew Peters Recorded using Source Connect Edited by Andrew Peters Mixed by Voodoo Radio Imaging Tech support by George "The Tech" Whittam Don't forget to subscribe to the show and join the conversation on our Facebook group. To leave a comment, suggest a topic, or just say g'day, drop us a note at theproaudiosuite.com. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

In this episode, the Pro Audio Suite team dives deep into the world of USB microphones. Once considered a big no-no for professional audio work, USB mics have come a long way. But are they truly ready to replace traditional XLR setups? Join Robert Marshall, Darren "Robbo" Robertson, George "The Tech" Whittam, and Andrew Peters as they explore the pros and cons of USB mics, discuss technological advancements, and share personal experiences. Special thanks to our sponsors, Tribooth and Austrian Audio, for making this episode possible. Sponsors: Tribooth: The best vocal booth for home or on-the-road voice recording. Use code TRIPAP200 for $200 off your Tribooth. Austrian Audio: Making passion heard. Credits: Hosted by Robert Marshall, Darren "Robbo" Robertson, George "The Tech" Whittam, and Andrew Peters Recorded using Source Connect Edited by Andrew Peters Mixed by Voodoo Radio Imaging Tech support by George "The Tech" Whittam Don't forget to subscribe to the show and join the conversation on our Facebook group. To leave a comment, suggest a topic, or just say g'day, drop us a note at theproaudiosuite.com. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

The Pro Audio Suite - S7 EP29: Processed Session Audio Welcome back to The Pro Audio Suite! In this episode, we delve into the intricacies of processed session audio and the importance of proper audio handling during recordings. Join Robbo, Robert, George, and AP as they share their experiences and insights on managing audio quality in various recording scenarios. Episode Highlights: Session with a "Processed" Actor: Robert recounts a session with an actor who claimed to have no processing, but the audio told a different story. Importance of Proper Gain Staging: Tips on managing preamp and output gain to avoid unnecessary compression and maintain audio integrity. Challenges of Compression in Voiceover: The team discusses how heavy compression affects natural sound and the listener's experience. Audio Quality in National Commercials: The state of audio production for television commercials and the shift towards lighter processing. Mixing Techniques: Debates on mixing into a compressor versus post-mix compression and their impacts on the final audio product. Client Expectations and Audio Delivery: Navigating client expectations regarding raw and processed audio and the importance of clear communication. Key Takeaways: Identifying and addressing hidden processing in recorded audio. The significance of maintaining proper gain staging during recording sessions. The effects of heavy compression on voiceover performances and how to achieve a natural sound. Understanding client terminology and ensuring clear communication about audio expectations. Practical mixing techniques to enhance audio quality without over-processing. Join us for an episode filled with expert advice, real-world examples, and lively discussions. Whether you're a seasoned audio professional or just starting out, you'll find valuable insights to improve your recording and mixing techniques. Resources Mentioned: Tips for Managing Audio Compression Recommended Gear for Voiceover Recording Understanding Client Terminology in Audio Production Connect with Us: Join our Facebook Group for updates and more tips. Subscribe to our YouTube channel for Pro Audio Suite Tips and more exclusive content. Check out our sponsor, Tribooth, for the best vocal booth solutions. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

The Pro Audio Suite - S7 EP28: Exploring Sound Quality in Modern Audio Production Welcome back to The Pro Audio Suite! In this episode, we're diving deep into the fascinating world of sound quality and its impact on audio production. Join Robbo, Robert, George, and AP as they explore various aspects of audio fidelity, the significance of audio quality in different mediums, and practical tips for achieving the best possible sound in your projects. Episode Highlights: The Impact of Audio Quality on Believability: Robert discusses a study by the Australian National University and USC exploring how audio quality affects listeners' perception and believability. Technology vs. Nostalgia: A debate on why we're often chasing vintage sounds and aesthetics even as technology advances. Nature Recordings and Hyper-Realism: An intriguing conversation about creating immersive audio experiences that go beyond natural sounds. Challenges in Audiobook Production: Tips and tricks for audiobook narrators and producers, including dealing with plosives, mic technique, and the importance of good audio quality. Audio in Different Environments: How listening environments affect audio perception and the importance of adapting sound for various playback scenarios. Practical Tips: Recommendations for using headphones, managing audio quality, and achieving a consistent sound during recording sessions. Key Takeaways: The link between audio quality and how much listeners believe and engage with the content. Balancing technical accuracy and sensory experience in audio production. The importance of good mic technique and consistent performance in audiobook recording. Practical solutions for common audio issues, like plosives and uneven mic placement. Adapting audio production techniques for different listening environments to maintain clarity and impact. Join us for this insightful episode packed with expert advice, real-world examples, and a touch of humor. Whether you're an experienced audio engineer or just starting out, you'll find valuable tips to enhance your audio projects. Resources Mentioned: Study on Audio Quality and Believability Recommended Microphones for Audiobook Recording Nature Sound Apps in Atmos Connect with Us: Join our Facebook Group for updates and more tips. Subscribe to our YouTube channel for Pro Audio Suite Tips and more exclusive content. Check out our sponsor, Tribooth, for the best vocal booth solutions. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

In this weeks episode of The Pro Audio Suite, we delve into the world of high-resolution audio and the development of cutting-edge microphones with our special guest, Craig Field. Known for his work at the National Archives of Australia and his intriguing collaboration with Sony, Craig shares the fascinating journey of co-developing a groundbreaking microphone that has revolutionized high-resolution audio recording. Hosts: Robert Marshall, Source Elements and Someone Audio Post, Chicago Darren "Robbo" Robertson, Voodoo Radio Imaging, Sydney George "The Tech" Whittam, LA Andrew Peters, Voiceover Talent and Home Studio Guy Special Guest: Craig Field, National Archives of Australia and co-developer of the Sony microphone Sponsors: Tribooth: The best vocal booth for home or on-the-road voice recording. Use code TRIPAP200 for $200 off. Austrian Audio: Making passion heard. In This Episode, You'll Discover: The Story Behind the Sony Microphone: Craig's journey from owning Elkwood Studio in Sydney to collaborating with Sony. The development process and challenges of creating a high-resolution microphone. High-Resolution Audio: The significance of high-resolution audio in different parts of the world, particularly in Japan and Europe. How high-resolution audio formats like DSD and PCM are utilized and appreciated. Technical Innovations: The importance of having high-quality microphones to complement advanced A/D converters, digital preamps, and cable technology. Details about the Sony C-100 microphone and its unique capabilities, including its ability to capture frequencies up to 50kHz. Real-World Applications: Recording a unique performance on the world's largest piano built by Wayne Stewart, using the Sony microphones. How high-frequency recording is beneficial for sound effects and Foley work. Microphone Technology: The significance of anti-vibrational technology in microphones to minimize reverberance within the capsule. Comparisons with other high-end microphones and the innovative features of the Sony microphones. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

Join us for a deep dive into the fascinating world of audio archiving with special guests Ben Chesterman and Craig Field from the National Archives of Australia. In this two-part series, we explore the intricate processes involved in preserving our audio history, from old vinyl records to modern digital formats. Whether you're a seasoned audio professional or just curious about how our audio heritage is kept safe, this episode is packed with insights and stories that will captivate and inform. Highlights: Introduction to Ben Chesterman and Craig Field, their roles at the National Archives of Australia, and their backgrounds in music production and post-production. The remit of the National Archives: handling records from various government agencies including the Department of Defence, ABC, SBS, and more. The process of archiving: from receiving physical materials to ensuring they are stored in optimal conditions. Digitizing audio: challenges, techniques, and the importance of maintaining the original format. The significance of preserving cultural and historical records for future generations. Advanced archiving techniques: using lasers to read vinyl grooves and preserving shellac records. The importance of creating multiple copies and using cloud storage for long-term preservation. Digital preservation challenges: dealing with outdated formats and ensuring accessibility. Real-life examples of rare recordings being rescued and digitized. The role of archivists in maintaining and updating archives to keep them relevant and accessible. Sponsors: Tribooth: The best vocal booth for home or on-the-road voice recording. Use code T-R-I-P-A-P 200 to get $200 off your Tribooth. Austrian Audio: Making passion heard. Links and Resources: National Archives of Australia: Website Ben Chesterman's LinkedIn: Profile Craig Field's LinkedIn: Profile Source Elements: Website Tribooth: Website Austrian Audio: Website Join the Conversation: Subscribe to the show and join our Facebook group to engage in discussions, suggest topics, or just say g'day. Visit our website for more details. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

In this episode of The Pro Audio Suite, Robbo shares the story of Sumara Meers, who has transformed an old bathroom into a functional voiceover studio. This episode is a testament to the fact that you don't always need the perfect space to build a studio. Robbo discusses Samara's journey, the challenges she faced, and the creative solutions she employed to make her unique studio work. Listen in for tips on making the most out of unconventional spaces and a subtle reminder that it's the talent and technique, not just the room, that makes great audio. Here are Sumara's pictures   A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

Description: Welcome to The Pro Audio Suite! In this episode, we chat with Mike Rozette from iZotope about the latest features of their Noise Reduction Suite, RX11. Whether you're a seasoned audio engineer or just starting out, you'll find valuable insights into making your audio cleaner and more professional. Episode Highlights: Introduction to iZotope RX11 New features and improvements Practical applications for noise reduction Tips for achieving the best results Listen to this episode to learn: How RX11 can enhance your audio projects Key features that set RX11 apart from previous versions Real-world examples of RX11 in action Prefer to watch the video version? Check it out on our YouTube channel here. Connect with Us: Subscribe to The Pro Audio Suite: [Your preferred podcast platform link] Follow us on YouTube: [YouTube Channel Link] Keywords: iZotope RX11, noise reduction, audio engineering, audio production, noise reduction tips, The Pro Audio Suite, Mike Rozette, audio cleanup #AudioEngineering #NoiseReduction #iZotopeRX11 #TheProAudioSuite #AudioProductionTips A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

In this episode of The Pro Audio Suite, the team dives into the latest updates and features of RX 11 from iZotope. Robbo, Andrew, George, and Robert discuss the enhancements in RX 11, including the updated dialogue isolate feature and the ongoing debate on whether it's worth upgrading. They share personal experiences with RX plugins, talk about the importance of these tools in audio production, and compare them to alternatives like Waves plugins. Tune in to find out if RX 11 is the right fit for your audio editing needs. Key Points: Introduction: Welcoming listeners and sponsors. Brief overview of RX 11 and its position in the audio industry. RX 11 Features: Discussion on the new features in RX 11. Detailed look at the dialogue isolate tool and its effectiveness. User Experiences: Personal experiences with RX 11 and previous versions. Issues with compatibility and performance, particularly with Steinberg's WaveLab. Comparison with Alternatives: Comparing RX 11 with other popular tools like Waves plugins. Debate on whether to upgrade based on current needs and budget. Practical Applications: How RX 11 fits into the workflow of voiceover artists and audio engineers. Importance of tools like mouth de-click and noise reduction in everyday use. Future of RX: Predictions and hopes for future updates. Encouragement for users to stay updated and provide feedback. Closing Remarks: Recap of discussion. Shoutouts to sponsors and reminders to subscribe and join the conversation on the Facebook group.   A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

In this episode of The Pro Audio Suite, the team dives into the latest updates and features of Twisted Wave, a popular audio recorder and editor. George shares insights from a recent survey conducted by Twisted Wave's owner, Thomas, revealing what users want most in future updates. The team discusses the potential addition of multi-track capabilities and the complexities of implementing such a feature. They also touch on the importance of non-destructive editing and a history window feature. Join Robbo, Andrew, George, and Robert as they explore how these updates could impact the voiceover and audio production community. Key Points: Introduction: Welcoming listeners and sponsors. Brief overview of Twisted Wave and its current status in the audio industry. Survey Results: George shares results from Twisted Wave's user survey. Discussion on the most requested features: multi-track capabilities, non-destructive editing, and history window. Multi-Track Capabilities: Debate on the practicality and necessity of multi-track functionality for voiceover artists. Concerns about complexity and user-friendliness. Non-Destructive Editing: Importance for voiceover artists and audio editors. How it differs from current features in Twisted Wave. User Experience: Personal experiences and anecdotes using Twisted Wave. Comparisons with other DAWs and editors. Future of Twisted Wave: Predictions and hopes for future updates. Encouragement for users to participate in surveys and provide feedback. Closing Remarks: Recap of discussion. Shoutouts to sponsors and reminders to subscribe and join the conversation on the Facebook group.   A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson

In this episode of The Pro Audio Suite, we dive into the results of our recent Facebook group poll on favourite microphones. From the Shure SM7B to the Sennheiser MKH 8060, we discuss the mics you love and why. Robbo, George, AP, and Robert share their insights on the top picks, including some surprising mentions like the Austrian Audio OC18 and the affordable Audio-Technica AT875R. We also touch on some great customer service stories from Sennheiser and explore the nuances of various microphone features and performance. Join us for a passionate discussion about the tools that shape our sound! Episode Highlights: Introduction and shout-outs to our sponsors: Tribooth and Austrian Audio. Overview of the Facebook group microphone poll. Detailed discussion of popular microphones including the Shure SM7B, Rode NT1A, Neumann TLM103, Audio-Technica AT2020, and the Sennheiser MKH 416. Insights into user preferences and experiences with these microphones. Special mention of the Austrian Audio OC18 and its popularity among listeners. George's recommendation of the Audio-Technica AT875R as an affordable shotgun mic alternative. Stories of exceptional customer service from Sennheiser. Discussion on the Sennheiser MKH 800 Twin and its advanced features. Encouragement for listeners to join the Facebook group and participate in the ongoing conversation. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson #ProAudioSuite #Microphones #AudioEngineering #Podcasting #Voiceover #SoundDesign #AudioProduction #MicReview #ProAudioTips #RecordingGear Y'all ready to be history? Get started. (0:02) Welcome. Hi.   Hi. Hi. Hello, everyone.   (0:05) To the pro audio suite. These guys are professional, they're motivated. (0:09) Thanks to Triboose, the best vocal booths for home or on the road voice recording.   (0:14) And Austrian Audio, making passion heard. (0:17) Introducing Robert Marshall from Source Elements and someone audio post Chicago. (0:22) Darren Robert Robertson from Voodoo Radio Imaging, Sydney.   (0:25) Next to the VO stars, George the Tech Whittem from LA. (0:28) And me, Andrew Pinkers, voiceover talent and home studio guy. (0:32) Line up, man.   Here we go. (0:36) And welcome to another pro audio suite. Thanks to Triboose.   (0:39) Don't forget that code, T-R-I-P-A-P 200 to get $200 off your booth. (0:45) And Austrian Audio, making passion heard. (0:48) We've had a bit of a passionate response to our new Facebook group, (0:52) which is the pro audio suite podcast group.   (0:56) And Rubbo threw up a survey about microphones, (1:00) which one people would like to use and do use and don't use. (1:04) Yeah, I just, I kind of figured a robust discussion about microphones is always well received. (1:10) So I figured I'd start one and it's only a small sample because we've only just started the group.   (1:15) But some of the results sort of had me thinking a bit. (1:18) So basically what I did was I did a poll. (1:20) And I didn't go with my favorites.   (1:23) I just went with the microphones that as a freelance audio engineer, (1:27) when I'm walking into other studios, I come across a lot. (1:30) And I stuck them up there with an option for people to put their own up there as well. (1:34) So the ones I put up were the SM7B, the NT1A, the TLM103, AT2020, 416, of course.   (1:43) And that was about it. (1:44) And then left it open for people to sort of put their own up. (1:48) And the question was, which one's your best mate? (1:51) So what's the microphone that you choose in your studio? (1:55) Now, I've got to be honest, I kind of did figure that the 416 would feature fairly heavily and it has.   (2:02) I mean, the 7B sort of comes in fairly close and the TLM103 are exactly the same in terms of response. (2:11) But then some of the ones in the comments were sort of interesting as well. (2:15) Well, the one I thought was interesting was someone jumped on to Bill.   (2:21) Now I've got to try and get his name right. (2:25) Bill Answa. Is that right? (2:26) Answa.   (2:27) Yeah, I think it's Bill Answa. (2:28) Anyway, sorry, Bill, if I got your name wrong. (2:31) He is using the Austrian audio OC18 into an SSL2.   (2:36) Well, someone's been listening to our podcast. (2:38) And is he using the 4K button? (2:40) He says. (2:41) Yes, he does.   (2:42) Yeah, he goes, yes, indeed. (2:44) Thanks for teaching me that. (2:44) Yeah, and Phil writes on the Lewitt, which doesn't feature fairly.   (2:49) Yeah, we mentioned it on the show, but I don't see it a lot. (2:55) What else was the other one? (2:56) What's the 875R? What's that, a shotgun? (3:00) It's an excellent, excellent bargain shotgun mic. (3:05) Is it? (3:05) Right.   (3:05) It's the one that you recommend, George, isn't it? (3:07) It's so good. (3:08) Like, it's only Achilles heel is that it's not the quietest mic. (3:12) Self-noise is, you know, not as good as a 416.   (3:15) But it's a damn good substitute. (3:18) You know, it sounds similar. (3:20) I have one.   (3:21) So one of these days we'll pull it out and we'll compare it. (3:23) Yeah, I'd love to hear it. (3:25) But it sounds similar.   (3:26) It's not quite as large. (3:28) It's sort of like a short shotgun. (3:30) Is the polar pattern as tight as a 416? (3:32) I would say no.   (3:33) I would definitely say it's not as tight at all. (3:37) It's a more, nowhere near sophisticated mic. (3:40) It doesn't have that very complex line tube interference design.   (3:45) Yeah. (3:45) So anyway, it's a very simple mic, but it just sounds good. (3:49) And they're always under 200 US, 175 maybe.   (3:53) So that one's a... (3:54) 169 B? (3:55) That one's a great value. (3:56) And we've been recommending it a lot to folks who want a stunt mic. (4:00) Well, this is an interesting one from Jeff Berlin.   (4:03) Obviously the obligatory 416. (4:06) But he also has a Bosch or Soundalux U195. (4:10) I don't know that microphone.   (4:12) What do you say? (4:12) I have a Soundalux U99. (4:15) And it is basically a clone of a U67 using an actual EF86 tube. (4:22) And the Soundalux mics became Bach.   (4:25) Yeah, that's right. (4:27) Yeah. (4:28) And they are pretty high-end mics.   (4:30) They got bought by Universal Audio. (4:32) Yeah, that's correct. (4:33) Oh, really? (4:33) Yeah.   (4:33) Wow, that's too bad? (4:35) Is that too bad? (4:36) I don't know. (4:36) I don't know. (4:37) I mean... (4:38) It's kind of weird.   (4:38) I thought they bought Sphere microphones. (4:40) They had to buy all of them microphone companies. (4:42) So I threw all the mics that were in the comments, I think, into the survey.   (4:46) So it's easier to see. (4:49) And it's going to make it easier for people to continue voting. (4:51) But did you see anything that surprised you here? (4:55) Not me.   (4:55) Nothing really. (4:56) I mean, there's certainly plenty of ones that you don't see regularly in professional studios, (5:01) not that that means jack shit. (5:02) Because in a professional studio, you're looking for a workhorse that will do a whole bunch (5:07) of things, I guess, especially in post-production houses, as opposed to music studios.   (5:13) There's just no representation of a PZM mic here. (5:16) Come on. (5:17) There's no crown PZMs? (5:19) Oh, man.   (5:21) Like, turn my wall into the microphone. (5:22) Yeah, that's right. (5:24) The MK4, the Sennheiser, what's an MK4? (5:27) It's like a lower end shotgun.   (5:29) No, actually, no. (5:30) It's their entry-level side address LCD. (5:34) Large diaphragm.   (5:35) Oh, okay. (5:36) Large diaphragm. (5:37) It's like, I mean, I think in character, it's somewhere very similar to a TLM102 or (5:43) 103.   (5:44) It's in that range. (5:45) Is it kind of like the AKG perception? (5:48) Kind of. (5:48) It's like that zone.   (5:50) But I mean, it's not that cheap. (5:51) It's still a $400 mic. (5:54) I think it's more like a two.   (5:56) Oh, it's used. (5:57) Maybe it's used $200. (5:59) Yeah, maybe.   (6:00) I mean, Guitar Center's got them, but maybe those are used. (6:02) But Sweetwater's trying to sell it for $400. (6:05) How much is an AKG perception? (6:07) LDC.   (6:08) I don't know. (6:08) They're quite a bit cheaper, like 200 range. (6:13) So, yeah, the Sennheiser MK4 is not bad at all.   (6:15) There's quite a few people who have those. (6:17) Well, speaking of Sennheiser, just as an aside, Chris McCallum, who we've (6:22) had on the show, he's probably one of Australia's best known location (6:25) recordists, put up a post about his Sennheiser. (6:30) He says, I have an interesting occurrence with a 10 year old Sennheiser (6:35) MKH8060 shotgun mic.   (6:36) One day it stopped working without warning and only issued a static (6:40) frequency. (6:41) I've taken it to Sennheiser's service and they've discovered that they are (6:44) unable to open the mic as the special screws holding the electronics (6:47) inside the barrel are completely seized. (6:49) They say they can see no sign of corrosion, but are unable to open (6:52) the mic, sort of shoring it open.   (6:54) What has surprised me is they have offered to take possession of this (6:57) mic and offer me a brand new one for an exchange of $700. (7:01) These mics now retail for well over $2,300. (7:04) So, I'm very happy with the outcome.   (7:07) So, this is now the second new exchange I've had since the (7:10) original purchase, as there was a recall in the very early serial (7:13) numbers. (7:13) So, it was replaced then as well. (7:15) I can't really fault their response and commitment to their brand.   (7:18) So, hey, that's... (7:18) Did you see my response on that? (7:21) No. (7:22) What's yours? (7:22) What did you say on that? (7:23) But they're charging him... (7:24) I was the original recording of the screws falling out. (7:30) They're basically saying they'll do the repair for $700.   (7:33) So, they're basically giving him a brand new mic for $700, yeah. (7:36) As the repair? (7:37) As the repair, I guess, yeah. (7:39) I'd say yes if it came with a one year warranty.   (7:41) Right. (7:42) At least. (7:42) Or whatever the new warranty is, I guess.   (7:45) It's a bit of a bummer though. (7:47) But yeah. (7:48) I had a similar thing.   (7:49) I actually had a similar thing happen with my 416. (7:52) It was an old one and it was playing up, (7:55) I sent it into Sennheiser and they kind of said, (7:57) look, we can fix it, but it's probably going to cost, (8:00) you know, almost the same price as a... (8:02) Probably about half the cost of a new one. (8:05) And then they... (8:06) Yeah.   (8:07) But then they sort of said, look, you can fix it, (8:09) but we can't guarantee it because it is old (8:11) and there's components could let go. (8:13) Then did me a cracking deal on a new 416. (8:17) Nice.   (8:17) As long as the mic wasn't cracking, that's a good deal. (8:19) Yeah, exactly. (8:20) Well, the first one was, the second one wasn't.   (8:23) Are you making fun of this London accent? (8:25) So, that's 8060 is a step up from the 416 in terms of... (8:28) Yeah, it looks like it. (8:29) Yeah, yeah. (8:30) Better signal response, maybe.   (8:32) Yeah. (8:33) The 8000 series is sort of their... (8:35) That's their new flagship line. (8:38) You know, small diaphragm mics in the head.   (8:40) Did Chris mention it in the episode when we had him on? (8:42) I feel like he did. (8:44) I feel like he's sort of go to mine. (8:46) Yeah, yeah.   (8:46) But see, Chris doesn't have a microphone locker. (8:49) He has a microphone walk-in wardrobe. (8:52) Yes, exactly.   (8:53) That's right. (8:55) Yeah. (8:56) He's the Imelda Marcos of microphones.   (8:59) I think Sennheiser makes a sight address version in that 8000 series. (9:03) It's multi-pattern and it's like $4000, (9:06) but it's supposed to be really excellent. (9:08) You know what I'm talking about? (9:09) 800.   (9:10) Is it the 800? (9:11) Is that what it is? (9:11) It's a really odd little mic. (9:13) It's very small. (9:16) And let's see if I can share.   (9:18) No, it's a multi-pattern. (9:19) It's not the little small tiny ones. (9:21) I know, but it's really small.   (9:23) I mean, I saw it at NAB. (9:25) I was like, oh my God, that thing's tiny. (9:28) I think I saw your video.   (9:29) I'm looking at the MKH 800 Twin. (9:34) This is a new model of microphone they just launched. (9:36) This is a different animal completely from what you're describing.   (9:40) This one's 3200. (9:43) And it is their variable pattern mic where you just simply... (9:48) What's that? (9:49) MKH 800 Twin? (9:51) Yeah, this is it right here. (9:52) I have it on screen, I think.   (9:54) Maybe. (9:54) There it goes. (9:56) There it is.   (9:57) Look at that sexy baby. (9:58) Quite spendy. (9:59) This picture doesn't show... (10:01) Well, you see how small it is by... (10:02) Because you can see the XLR barrel.   (10:05) The tail, it's small. (10:06) It almost looks like a mic port pro, the original one. (10:09) It is like the old KM86.   (10:13) The Neumann KM86, which is a side address, multi-pattern, small diaphragm mic that people go kind of gaga over. (10:21) Well, that's quite a spendy mic, 3200. (10:24) Which is two symmetrical push-pull... (10:28) It's a dual diaphragm.   (10:31) Is it dual output too? (10:33) Like, could we use it with our... (10:34) Yeah, so the way it works is you simply pot up and down the other capsule, and that's how you go. (10:40) So it's like... (10:41) But do you have a separate output of the other capsule so we can run it into our new software that you and I have purchased? (10:47) Right. (10:49) Yeah, it is quite a spendy mic.   (10:53) You know, it's so funny. (10:54) I have video of me interviewing the Sennheiser rep at NAB on YouTube, and someone's like, (10:59) Hey, isn't that Julian Kraus standing right behind him? (11:05) It was Julian Kraus standing behind you. (11:08) It was, it was like I missed an opportunity to chat with him.   (11:11) Oh, I saw it when I saw your video. (11:13) I saw him in the background. (11:14) He was having a look at the mics as well.   (11:15) Is that Julian Kraus? (11:17) I'm like, son of a gun, it is. (11:19) There are so many YouTubers at NAB, of course, you know. (11:22) I saw a couple, they were always like in transit, you know, but I would love to send hello to Julian (11:28) and thank him for his unbelievable commitment to very, very consistent and dry videos about audio interfaces.   (11:38) He's like the equivalent of the Sahara desert for YouTubers. (11:42) It is so freaking dry. (11:43) Yeah, but it's useful.   (11:46) And big. (11:46) You know, we're the polar opposite, really, aren't we? (11:50) Exactly. (11:51) And in fact, on that note, if you do want to vote for one of these microphones or tell us what you have, (11:56) go to your Facebook and or the Facebook, as I saw people call it, and look for the Pro Audio Suite podcast group (12:05) and you'll find the thread down there somewhere.   (12:07) Not the page, the group. (12:08) Yeah, the group. (12:09) We can even pin that, I think.   (12:11) Maybe it might be a way to pin it. (12:12) Well, I will. (12:13) I'll pin it to the top of our Facebook page.   (12:14) Oh, I can do it right now. (12:15) Oh, you can do that. (12:16) There you go.   (12:17) Pin the feature. (12:18) There you go. (12:18) So yes.   (12:19) Done. (12:20) Out. (12:21) Pinned.   (12:24) Pinned. (12:25) So that was fun. (12:27) Is it over? (12:29) The Pro Audio Suite.   (12:30) Thanks to drivers and Austrian Audio, recorded using Sauce Connect, edited by Andrew Peters and mixed by Blue Doo Radio Imaging. (12:41) Don't forget to subscribe to the show and join in the conversation on our Facebook group or leave a comment, suggest a topic or just say kiddo. (12:48) Drop us a note at our website

In this week's episode of The Pro Audio Suite, the gang dives deep into the fascinating world of microphones. Join Robbo, AP, George 'The Tech' Whitham, and Robert Marshall as they explore the nuances, pros, and cons of 9 different mics, including the Sennheiser MKH 416, Neumann TLM 67, Neumann TLM 102, Neumann TLM 103, AKG C414, Shure SM7B, Rode NTG5, Sennheiser MD 421, and Electro-Voice RE20. Whether you're a seasoned audio engineer or just starting out, this discussion is packed with insights that can help you make informed decisions about your mic setup. Tune in to hear the hosts' personal experiences, tips, and a few laughs along the way. Key Topics Discussed: Overview of 9 different microphones The unique characteristics of each mic Personal anecdotes and experiences with the mics Practical tips for choosing the right microphone for various scenarios A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson #ProAudioSuite #Microphones #AudioEngineering #Podcasting #Voiceover #SoundDesign #AudioProduction #MicReview #ProAudioTips #RecordingGear

Hosts: Darren "Robbo" Robertson Robert Marshall George "The Tech" Whittam Andrew Peters Special Guest: Matt Calrick (https://www.mattcowlrick.com/) Sponsors: Tribooth: The best vocal booths for home or on-the-road voice recording (Code: TRIPAP200 for $200 off). Austrian Audio: Making passion heard. Main Topic: Setting Up a Home Studio Introduction: The episode kicks off with the hosts introducing themselves and their sponsors. The main discussion revolves around recommendations for setting up a first home studio for voice-over work. Key Points: Building a Booth: Robbo shares how he built a recording booth for his wife in their walk-in wardrobe, using clothing for sound treatment. Microphone Recommendations: Sennheiser 416 NTG5, NTG1, NT1, OC16 Audio Technica AT875R Interface Recommendations: AI1, SSL2, Micport Pro, Steinberg UR series (IXO12, IXO22) Headphones: Closed-back models like Audio Technica ATH series and Austrian Audio Hi-X 15 DAWs and Software: Twisted Wave recommended for its simplicity and cross-platform capabilities. Additional Insights: Importance of a good recording space. Flexibility and longevity of audio gear. Importance of connectivity for remote sessions (Zoom, Source Connect). Conclusion: Investing in quality gear that can be used both at home and on the road. Recommendations for a balanced setup: Tribooth, Sennheiser 416, and SSL2. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson #ProAudioSuite #HomeStudio #VoiceOver #AudioGear #Podcasting #Microphone #AudioInterface #RecordingBooth #AudioProduction #StudioSetup

In this week's episode of The Pro Audio Suite, we've got something right out of left field! Our guest, Matt Cowlrick, an Aussie voice actor living in Canada, has done something pretty remarkable—transforming his Tesla into a rolling recording studio. Yes, you heard that right! Tune in as Matt reveals how he converted his Tesla into an innovative mobile recording space, complete with a built-in mic stand. Hear about the nuts and bolts of mobile recording setups, from the gear choices to the unique challenges of recording in a car. Matt shares his experience using the Mic Port Pro 2 and a Sennheiser 416, all rigged up to record straight onto his iPhone with Twisted Wave. We dive deep into the acoustic challenges of a car's interior, particularly a Tesla's glass-heavy design, and Matt's creative solutions involving pillows and moving blankets to achieve the best sound. For those who can't wait to see it in action, Matt has also shared a video tour of his Tesla studio on our website. Check out this link to watch the magic happen: Matt's Tesla Studio Tour Join us as we explore how necessity drives innovation and how you can apply some of these tricks to your own mobile recording endeavors. A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson Y'all ready to be history? Get started. Welcome. Hi.   Hi. Hi. Hello, everyone.   To the pro audio suite. These guys are professional, they're motivated. (0:09) Thanks to Tribooth, the best vocal booths for home or on the road voice recording.   And Austrian Audio, making passion heard. Introducing Robert Marshall from Source Elements and someone audio post Chicago. (0:22) Darren Robert Robertson from Voodoo Radio Imaging.   Sitnik to the VO stars. George the Tech Whittem from LA. And me, Andrew Pinkers, voiceover talent and home studio guy.   (0:37) And welcome to another pro audio suite. Thanks to Tribooth, the golden handcuffs can be removed. And Austrian Audio, making passion heard. (0:44) Today, we have a special guest. Matt Calrich is joining us because Matt and I've been having a little conversation about setting up a rig in your car, which was something I played around with a few weeks ago now. (0:56) But Matt, you've done your thing as well.   What have you done? (0:59) Well, I changed it up from what I've done in the past, which quickly is using the Apollo Solo and a laptop and usually the 416. (1:11) Now for being at home in Canada and not actually, you know, traveling on holiday, I just wanted to have something easy to get going at any given moment, just pull over on the side of the road. (1:25) And so I use the Mic Port Pro 2, still the 416, and recording on the iPhone.   So just really nimble and mobile. (1:36) Are you using Twisted Wave on your mobile? Yes. Yes, until further notice.   (1:43) Yours is very similar to mine because that was my experiment with the iPhone 15 because it's got the USB-C and using the Twisted Wave app. It's fantastic. (1:53) And you can actually use their kind of Twisted Wave Dropbox as well off the iPhone, which is really, really handy.   (2:00) But the only difference between you and I, I think, is that you use the 416 and I've been playing around with the CC8 from Austrian Audio. (2:07) Well, he uses the 416 and you use the 416 sometimes and now. (2:15) And the other big difference is that you have a Tesla, which has a lot of glass.   (2:21) Has that become an issue for you? (2:23) Yeah, well, I'm still still in the early days of, you know, finding my feet with it. (2:27) I only set up this new rig, so to speak, on the weekend, got all the required parts, which was the idea of being able to have a mount in the car that I can just attach the mic and the... (2:43) How did you feel about drilling into your Tesla or is that glued in there? (2:46) I didn't. It's glued.   And I also just kind of drive my Tesla like a piece of shit. So I don't really care. (2:54) I just drive it like a car, so sticking something on the inside.   (2:58) It's not precious. It is no longer precious. It is now a utility vehicle and it's used for what it was designed for.   (3:06) Yeah. I mean, let's be honest, putting double sided adhesive tape on the inside of my Tesla is probably not the worst thing that I've done to it. (3:13) So you're not going to mount a M49 from that thing.   (3:18) Since it's now technically a recording studio, does that mean your car's a tax deduction? (3:21) You say that like I don't already try to claim as much as I can. (3:29) Yeah, that's a good point, Robert. Yeah, I wonder how much else I can squeeze out.   (3:32) Yeah, exactly. My new recording studio just happens to be on four wheels, that's all. (3:36) Yeah, exactly.   (3:37) Hey, if anyone can play it, George, if you can, I don't know. Now would probably be a good time to have a listen to the audio, Matt Sentis. (3:45) I can do playback over here if I... (3:46) Can you? Okay, yeah, cool.   (3:47) Okay, here's me recording in the car on a 416, the Mic Port Pro 2. (3:57) There's a windsock on the mic and there's a pretty significant humming sound, which I'm sure you can hear. (4:08) That's the car. I don't know how to turn it off.   It's an electric car, so that's something to work with. (4:16) But the setup is nice and it's convenient, so now I just have to work on... (4:24) And so here's the treated one. (4:26) But the setup is nice and it's convenient, so now I just have to work on fixing things, like the car sound and the whirring.   (4:40) But I like the concept. I just have to try to get it sounding as good as possible. (4:47) So I'm guessing you were pretty close to the mic there.   (4:50) Yeah, pretty close. And then what I added later was a pillow in one take and then I brought in a moving blanket on the other. (5:06) But I was pretty close to try and offset the carriness.   (5:11) Were you putting the pillow behind you someplace? (5:14) The pillow was wedged. It was two pillows actually, because they were small pillows. (5:18) Wedged in the front screen.   And then the moving blanket I had just draped over me like a villain. (5:31) It was not comfortable, but more for like a testing perspective to see what had changed. (5:37) Do you have one without all that extra stuff? (5:39) That was the first one.   They're remarkably similar. (5:44) You know what makes me laugh though is if this takes off, if this becomes a trend, you'll be able to go to the local mall and realise who's a voice-over artist and who's not because the car of the voice-over artist is going to have blankets and pillows (5:56) and cut those one on the back seat. (5:58) Although they're just living in their car, which is an understatement.   (6:00) Yeah, exactly. (6:02) And a really weird iPhone mount for a stick. (6:05) Yes.   (6:07) It's going to look entirely nefarious. (6:10) I love the gooseneck attached to the ceiling. (6:13) Finding adhesive that would mount that strongly enough to hold the weight of the mic and the mic port and the gooseneck itself.   (6:20) It's a decent amount of weight. (6:23) Do you put the mic port right on the mic port? Do you use a little adapter like we got for like Andrew got? (6:31) Oh no, I just assumed that Andrew's was directly plugged in. (6:36) No, I think the 416 and the 41.6 and the OC8, they're all too thick at the base to fit into the newer mic port.   (6:44) The 41.6 fits and the NTG5 fits. (6:50) And only the OC8. (6:52) The CC8 does not.   (6:53) Sorry, CC8. What a stroke of work. (6:56) And I also have the Rode NTG5, which Andrew and I were talking about when I was in Australia.   (7:02) And so I'd be interested to try that in the same situation. (7:06) I used the NTG5 in the back of my car, the first test I did before the CC8 got here. (7:12) And yeah, it sounded great.   (7:13) You probably get the same result as the 41.6, I would suggest. (7:17) There's a bit more bottom end to it. That's the only thing.   (7:20) I also found the NTG5, it seemed more sensitive than the 416. (7:29) I don't know. (7:30) Oh yeah.   (7:31) It has a much higher output. (7:33) No, because I was in Mexico hanging out with Dustin Eboar. (7:39) And we had my tri-boot there and kind of our gear combined.   (7:43) And we tried both the 41.6 and the NTG5 with exactly the same gear, just switching the mic. (7:53) And it was quite different. (7:55) Yeah, yeah, yeah.   (7:56) That's a huge amount of output on the NTG5. (7:59) Right. (7:59) My NTG5 is at the mailbox waiting to be picked up because they replaced it.   (8:04) Oh wow, that's cool. (8:06) I'm the only one left with one that didn't blow up, I think. (8:09) Mine blew up? (8:10) Yeah, mine didn't blow up.   (8:14) No. (8:15) Don't use it. It won't blow up.   (8:18) I had a sphere mic blow up in Australia. (8:22) Yeah, I took it all the way to Australia thinking how great it was going to be having that mic with me. (8:28) And then I got there and was absolutely perplexed for a while why it wasn't working.   (8:32) And it turned out to be a busted capsule. (8:34) And this was a brand new sphere. (8:35) You know the problem with that, mate.   (8:36) It was actually a northern hemisphere and you're in the southern hemisphere. (8:41) That was the problem. (8:42) Oh my God.   (8:44) You are, I will. (8:47) David Kay traveled with the sphere to Japan, you know. (8:50) And I just thought it was risky because it is a much more fragile mic than any small diaphragm, you know, shotgun or pencil mic, you know.   (8:58) Small diaphragm, shotguns, and pencils are a much, much better travel mic companion. (9:03) Well, the shotguns are made for like, you know, like one of the things about the 416 is go record in the wind. (9:09) Well, in a rainforest.   (9:10) In a rain, right. (9:11) You can take a 46 in a rainforest. (9:14) Right.   (9:14) Because it's working like as a RF microphone instead of directing it off the... (9:20) Yeah. (9:21) Well, as does the NTG-5, you know. (9:23) The NTG-5 is RF? (9:24) Yeah.   (9:25) Really? (9:26) So any mic with an RF design is basically completely impervious to moisture. (9:33) Yeah. (9:34) So that's why they're used.   (9:36) But as for the capsule blowing up, what was the outcome? (9:39) Is that mic still sitting in the box or... (9:43) Yeah, I haven't replaced it yet because replacing it in Australia when it was all happening was just silly business. (9:49) So I've waited until I go back to Canada and then promptly didn't do it. (9:54) It is a secondary sphere because I recently got a new Apollo unit and they threw in one of the new ones for free.   (10:03) And I thought... (10:04) Oh, was it the DX? (10:05) Yeah. (10:06) They threw in the small one? (10:08) Yeah. (10:08) So it's a bit small.   (10:09) How do you find it compares? (10:10) It has less of a capsule working. (10:14) I like the smaller size. (10:17) I mean, it's not hugely noticeable, but yeah, I'm excited to try it.   (10:22) Oh, so the one that you traveled with was this new smaller addition. (10:26) Yeah. (10:27) Yeah.   (10:28) And I have a pretty good travel bag. (10:30) Like, I hear you on the durability of those large diaphragm mics. (10:35) But yeah, I've managed to find this.   (10:39) It's a camera bag and it's got a good hard shell and it's a backpack. (10:44) And to the chagrin of my engineer took an exacto knife and just cut out the foam in the sphere it comes with. (10:56) And I just shoved it in this camera bag and it feels really well protected.   (11:00) But then again, maybe I smashed a capsule when I was traveling and it's not as protected as I thought. (11:07) Oh, any dents? (11:08) No, no dents. (11:10) Is this like the torque? (11:11) I'm expecting them to replace it.   (11:12) Like, it just sounds like vaulty. (11:15) But it'll be interesting because I picked up the different microphones, the ocean way and the main one, I think. (11:22) I did those two.   (11:23) I forget, but... (11:25) The sphere models. (11:25) The sphere models, but I'll just use it with the 818. (11:28) How's that working out? (11:29) I haven't touched it yet.   (11:31) Oh yeah, I haven't even. (11:32) It's just color. (11:33) But I figure it'll just be, you know, like color, you know, even if the sphere mics are somehow accurate.   (11:38) I would imagine. (11:39) I mean, that is something we have not done yet. (11:41) We haven't done an OC818 versus sphere mic sound.   (11:45) You know, how do they sound compared to each other? (11:48) How different is the OC818 through the sphere 47? (11:53) Right. (11:53) Can you swap in an OC818 if you don't have a sphere or you just don't want to bring the sphere because it's so physically large? (12:02) Can you just plug it in, you know? (12:04) It would work with any truly dual output large diaphragm mic, you would think. (12:10) Yeah, because there's a couple others out there.   (12:12) Not that many, but Sennheiser has the new MKH. (12:15) I think it's the Assault at NAB. (12:18) I believe it's called the 800.   (12:20) And it's a dual output mic. (12:22) And then Aladdin has one, and Pearl has one. (12:26) It's becoming a thing.   (12:27) It is. (12:28) I was thinking that when they can get them to the size of something like, you know, an NTG5 and shorter, (12:34) that'll be a huge game changer to have a modeling mic that you can travel with, (12:38) especially if it has the tech that the sphere has where you can kind of mitigate problems with the room in real time with those sets. (12:47) Oh, the sphere has like the reflection filter built in.   (12:50) George can probably explain it better than I can. (12:52) Yeah, I don't get it. (12:54) Oh, yeah.   (12:54) Well, they have a set of these filters in the sphere plug-in itself that are designed to compensate for acoustical flaws. (13:06) With using those reflections. (13:08) Okay, that's what it's for.   (13:09) And so they're just little curves they came up with. (13:14) But they made it very user friendly. (13:16) Instead of having it be a variable knob, you know, (13:19) they just have a whole bunch of like, click on this picture.   (13:22) If it looks kind of like what you're sitting in front of, then try this. (13:26) Which is cool because it's just one less thing to have to think about. (13:31) But the thing is, there's just a setting for booth.   (13:34) Which clearly is not going to work because everybody's booth is a different size. (13:38) Although I'd love to see the EQ curve for the chaotic eyeball. (13:46) Well, I did look at the MKH 800 Twin, it's called, the 800 Twin.   (13:52) And it's a bit spendy at $3,200. (13:55) But if you want a very small two capsule microphone to travel with, that one could fill the bill. (14:01) It is very small.   (14:03) A very old microphone that few people know about is the Neumann KM86. (14:09) It's a small diaphragm or smallish diaphragm. (14:12) But dual-sided, full polar pattern selection.   (14:17) It looks like a tiny U87, I think, kind of thing. (14:22) I believe, if I remember right. (14:24) But it's a small diaphragm, multi-pattern.   (14:24) It looks like a German hand-grinder. That's what it looks like. (14:27) The KM86.   (14:29) But it's a multi-pattern small diaphragm. (14:31) So you could, if someone modded it to have more than one output. (14:34) Well, have you thought about, or even wanting to bother with using... (14:38) Did you say you tried using your Sphere Apollo combo in your Tesla or in your car? (14:44) You've done that now or in the past? (14:46) Not in the Tesla.   (14:49) Yeah, I have taken the Sphere and a Solo. (14:54) And my laptop is the travel rig to Australia. (14:58) You did that in the Ferrari, right? (15:01) Or was it the Lamborghini? I can't remember which one? (15:03) Yeah, the Ferrari has this humming noise thing all the time.   (15:07) I guess it just does that. (15:08) And unfortunately, the people at the dealership didn't like it, (15:11) that I took my gear and just sat in their car and started taking photos. (15:16) I wasn't pretty sure for some reason.   (15:20) Nor the guy whose Tesla I stole this afternoon. (15:26) And glued a mouth-mouth. (15:30) The only thing the guy did is he glued this thing.   Is it attractive? (15:33) I brought him some alcohol swabs. He'll be right. (15:37) I've worked out what the humming noise is in the Tesla.   (15:40) Oh, really? (15:40) It's the Musk hydroponic mode. You've got to turn that off. (15:46) I drove on in the screw mode.   (15:48) I think Robert's on the hydroponic mode right at the moment. (15:51) I am. Hold on.   (15:54) Fantastic. (15:55) Well, I was asking because I rigged it up for David Kay. (15:59) We did the Sphere on a mount arm.   (16:02) I got him this crazy over-engineered cobbled-together arm. (16:06) It's basically, if anybody from lighting knows what a baby arm is. (16:10) But it's basically, you know, it's an arm with a clamp on each end.   (16:14) So one clamp clamps to the steering wheel or a yoke or whatever it is in that car. (16:19) And then the mic mounts to that. (16:21) And it also has a place to mount your phone or tablet to read your script.   (16:26) And that whole thing rigs off your steering wheel with that huge mic. (16:29) And then we put the mic sideways. (16:30) That's what we found worked best was, because it's so large, (16:33) to get the capsule in the ideal spot.   (16:36) We just have it literally sideways. (16:39) And he's running a U67 model. (16:42) Because that's the mic he would typically use at home.   (16:45) And the clients were more happy with it. (16:47) I was amazed. (16:48) I didn't think it was going to work with that.   (16:50) Because we didn't put a pillow or anything up against the windscreen. (16:54) And it worked out. (16:55) And that's a Model X, which is physically larger inside.   (16:58) So that helps. (16:59) I don't know if it's because the windshield is so long. (17:02) Because the windshield is facing down.   (17:05) It's not really facing you. (17:06) It's not going to hit the microphone. (17:07) Exactly.   (17:08) The sound is going to go down to the dash. (17:12) It's directly behind and directly in front of the mic. (17:15) I would think that's the first sort of issue.   (17:19) I guess with my setup that I did most recently in the Tesla, (17:22) I am more like talking across to the passenger seat, (17:26) rather than directly at the windshield. (17:30) So pillows stuffed into the windshield opposite the mic. (17:35) Yeah.   (17:35) That would be one spot. (17:37) And I was thinking of taking some of the tri-booth blankets (17:41) and hanging them from the coat hooks (17:47) or the handlebars on the side (17:50) and seeing how that works out. (17:52) They're quite long though, the tri-booth ones.   (17:55) Yeah, they're big. (17:56) You could nail gun them to the roof. (18:00) Or staple them or something.   (18:02) Super glue. (18:04) 3M will just laugh gleefully as they see me coming. (18:09) Some of these guys send me sticky squares.   (18:12) But it's funny, isn't it? (18:12) How different your environment in the Tesla is to my car, (18:16) which is a smaller car, two doors, tiny in the back. (18:20) And I just squeeze in the back because I've got my glass roof. (18:24) So I don't have to worry about that.   (18:26) How the Vespa setup worked? (18:29) It's hard getting your head under the seat. (18:32) But I'm working on that. (18:35) No glass roof to worry about.   (18:37) Yeah, you're starting with a difficult proposition with the glass ceiling, aren't you? (18:43) It's a killer to begin with. (18:45) So what do you do to the audio after you record raw files? (18:48) And do you just raw record raw files and send? (18:51) Or do you do any cleanup? (18:53) Well, yeah, herein lies the problem that I don't have access to a door. (18:58) It's just Twisted Wave Mobile.   (19:02) But I also tried to think about what I actually wanted this setup to do or to achieve. (19:08) And it really is just for the ants in the pants stuff that people can't wait for, (19:15) and for auditions and quick turnaround jobs. (19:17) But when I'm here in Victoria, and I'm not at my home studio, (19:23) I'm about a 40-minute drive to downtown.   (19:26) And in downtown Victoria, I do have a small commercial studio that I own. (19:32) And it has a StudioBricks in there. (19:34) So it's not too far to get to either one of those.   (19:37) So I didn't want to go overboard with the car rig. (19:43) And if I'm proper traveling, then I'm usually taking the Triboose. (19:47) But also, to be fair, mate, as an engineer, (19:49) I'm guessing Robert would agree with me on this.   (19:51) He said, if you sent me that file, I'd have no issue. (19:55) Sure. (19:55) Yeah, I'd have no problem.   (19:56) Even with that hum, Cevox seemed to take it out pretty well. (20:02) I don't know how much artifact do you got after that. (20:07) It wasn't too artifacty, yeah.   (20:09) The twist of a knob on clarity, that'd be gone. (20:12) So really, that's no issue. (20:13) Yeah, absolutely.   (20:14) That's another good question, because I was talking to a client about Cevox today. (20:18) And I said, you know, Cevox does make it sound really good to you. (20:21) The question I guess I have, really, is does it make it sound good to the engineer? (20:26) And how much time, I mean, Robbo and Robert, (20:28) how much have you heard audio through Cevox that you've received on your end? (20:33) If I've gotten it, I don't know that I've gotten it.   (20:35) I wouldn't know. (20:37) It's pretty transparent. (20:40) It is really transparent.   (20:42) That is the magic of that plugin. (20:44) If you go all the way to the walls, you might start picking up some, you know, go 100%. (20:49) You might pick up some very small artifacts, but it's amazingly transparent.   (20:55) Yeah, and more dynamic outside sounds as well. (21:00) I was recording at my parents' house in Australia, (21:04) and some inconsiderate person was mowing their lawn. (21:10) So like the one of your parents? (21:12) Yeah, one of my parents.   (21:16) And yeah, Cevox really made a pretty good show of the recording, (21:23) even with it kind of like moving around different areas. (21:25) I guess like a mower is still that, you know, lower frequency. (21:31) It's kind of droning.   (21:32) Yeah, and it's a consistent sound that's easier to hear. (21:34) There's not too much doppler with it unless you have like the fancy writing lawn mower. (21:40) There is two laws in life that if you wash your car, it will rain.   (21:44) And if you open a microphone, the neighbors are going to start doing something noisy. (21:48) So, you know, it's two guarantees in life, right? (21:51) That's right. (21:54) Have you ever had anyone pick up? (21:56) Are you putting anything across their audio? (21:58) No, not for a long time.   (22:00) Even running the modeling preamps in the Apollo unit, I keep it all very sparing. (22:08) I just want to get the color and the tone of the preamp and just bring in that difference (22:15) rather than engaging any of the hectic EQ or compression. (22:23) I like to think that I follow a lot of the principles of what you guys say on this show.   (22:27) Just keep it simple, send it on clean, and start with a really good bass. (22:32) Obviously, that's harder to do in the car and when we're traveling, (22:35) but I still just try to... (22:38) When I travel, I want to as closely mirror what I have here as possible. (22:44) Which is tricky.   (22:45) You're not running through like a bunch of boutique outboard gear at home. (22:52) And the preamp is just the Apollo pre, right? (22:56) This is Solo or...? (22:57) That's right, yeah. (22:58) Yeah, I have all Apollo units.   (23:00) I used to have a 6176, the UAD, the numbers are right. (23:07) Yeah, I had that and I ended up selling it because it felt like too many moving parts (23:15) and modeling it in the Apollo unit was so impressive that I felt like I'm going to sell this thing. (23:22) So are you using more than just the mic models? Are you using the preamp models as well? (23:26) Yeah.   (23:27) Actually, at the moment, I'm just using the twin preamp. (23:32) But generally, I will run... (23:35) I'll do a lot of my recording on the sphere and either... (23:41) What's your go-to emulation on the sphere? What sort of default? (23:45) The 416. (23:47) And then I have a couple that I dial into for different types of reads.   (23:53) Like if I'm doing trailer or something grittier. (23:58) You know how they came with some presets from Jordan Reynolds made some and then Brent Allen-Hagel? (24:05) Yeah, I heard that. (24:05) Yeah, I like one that Brent did for trailers and it's actually a combo.   (24:13) I suppose I can switch to it now. (24:17) By the way, how they got onto the preset list of that company, I'm wondering... (24:22) It pulled that off. (24:25) Because I've been dealing with them for so many years and I've never gotten anything like that.   (24:31) That's crazy. (24:32) I'm not jealous. (24:32) No, I'm just very glad that service is available.   (24:35) I would like to see you on that. (24:37) At least he's given away his presets for free. (24:41) Yeah, well, I mean, no props to them.   (24:43) I think it's cool that they're available. (24:46) What's something you're using? (24:48) This is the trailer setting from Brent Allen-Hagel and I don't actually know the proper brands (24:56) because they can't list it, but it's the LD800. (25:01) So that's the Sony? (25:02) But then it's combined with the 47K.   (25:07) So you have 47K caps, I guess, something like that? (25:10) Yeah, the K47, is it? (25:12) K47? (25:13) That's cool. (25:14) So that's what we're hearing now? (25:16) Yeah, that's right. (25:16) And I should be... (25:17) I think I'm printing this.   (25:18) Yeah, yeah. (25:19) Yeah, it riches... (25:20) It riches... (25:21) Richens in Richens? (25:23) That's it. (25:23) Adds more richness.   (25:25) Have you taken the 416-416, put it in the second channel with no preamp or no emulation (25:32) and just put it right next to this one and record the exact same thing? (25:37) I have meant to try that. (25:38) No, I haven't yet. (25:40) But to my ears, my simpleton ears, they are really, really close.   (25:45) And I do have two 416s, obviously the one that's in the car now. (25:52) And I have a sentimental 416, which I'll never sell. (25:58) But I mostly am using the 416 setting on the sphere.   (26:02) And then I have a U87 AI just next to me here. (26:07) And I've hung on to that mostly for workflow purposes. (26:11) I kind of have one mic that is hooked up for, I guess, like quick auditions and quick rip (26:21) and reads.   (26:22) And then I have this sphere that I'm talking to you guys on. (26:26) It's over here with a music stand looking out the window. (26:30) It's just like a nice little zone.   (26:33) Yeah, big creative spaces. (26:35) We're actually talking about our next episode now, aren't we? (26:38) Oh, sorry. (26:38) We're drifting to the next episode.   (26:38) We have. (26:39) I wonder how they do the polar pattern, because if you think about it, the 416 being a shotgun, (26:48) you can really only get that polar pattern from the physical shape. (26:53) And they can recreate any polar pattern with the large diaphragm.   (26:57) But you'll notice a large diaphragm never has a shotgun. (27:01) I mean, you kind of have a hypercardioid. (27:03) Do you find the 416 emulation to be a little bit more forgiving in the movement, like the polar pattern? (27:13) Can you move around the mic and it doesn't sound quite as phasy and weird? (27:16) Yeah.   (27:16) So I've switched now. (27:18) Now I'm on the 416 emulation. (27:21) I just did the click of the mouse.   (27:24) And it's on... (27:25) Which pattern is it on? (27:29) The cool thing with the... (27:31) It's on cardioid, on a cardioid pattern. (27:34) And now it's on a hypercardioid. (27:38) So now I'm talking off axis.   (27:40) And you can hear how it jumps forward, even on the... (27:44) Put it on an omni. (27:45) Put it on an omni? (27:46) Sure thing. (27:47) There you go.   (27:48) Oh, yeah, there we go. (27:49) So that's omni. (27:50) That's an omni 416.   (27:52) Anybody wonder what that sounds like? (27:54) It's a huge curve of a 416 without the... (27:57) I mean, acoustics in the booth are fantastic. (27:59) So even when you're on the omni, it still sounds really... (28:02) It actually sounds nice. (28:03) Like focused.   (28:03) Yeah, right. (28:04) So here's me kind of doing like direct address. (28:08) My mic is above hanging from the roof and from the ceiling.   (28:15) And it's tilted maybe... (28:19) What is that? (28:21) Forty... (28:21) A little over 40 degrees down towards me. (28:24) More vertical than horizontal? (28:27) Or more horizontal? (28:28) More vertical than horizontal, I would say. (28:30) Oh, okay.   (28:32) Interesting. (28:33) Yeah. (28:33) That's a pretty steep angle.   (28:34) Yeah, I've been meaning to play around with it. (28:36) Just to see what different sounds I get out. (28:38) This one is set up partially for... (28:42) Yeah, the way I am at the music stand, (28:44) although I guess I could change it.   (28:46) But then the U87 that I have just over here is... (28:51) That's more horizontal than vertical. (28:54) I think it just shows how the room acoustics are. (28:57) So important.   (28:58) So big. (28:59) Because if you'll notice when you switch through those patterns (29:01) and try different mics, they all sound really good. (29:05) So it just comes down to these shades of mauve.   (29:08) Yeah. (29:09) Yeah, yeah, yeah. (29:10) Who consulted on this booth? (29:11) Who was that? (29:12) Oh, I'm not trying to plug myself.   (29:14) No, I'm plugging you. (29:18) But yeah, that is the point. (29:19) I think it would have been funnier if you dogged it.   (29:22) Yeah, exactly. (29:24) Exactly. (29:25) It's just great hearing a booth that I helped design out of... (29:29) Just hearing it years later or months later, whatever.   (29:32) Just hearing it used in this pair of headphones (29:35) that I'm wearing in this situation (29:36) and going, wow, it sounds good in there. (29:39) That's just so important, everybody. (29:40) Get those acoustics nailed (29:42) and then you can really enjoy the variety of microphones.   (29:48) It's like getting a taste for wine (29:50) and now you can enjoy different kinds of wine. (29:52) And I don't have that. (29:55) I do.   (29:55) I'm not saying I do. (29:57) But once you do, then you can enjoy a ton of... #ProAudioSuite #AudioEngineering #VoiceActing #MobileRecording #StudioOnTheGo #TeslaStudio

In this episode of The Pro Audio Suite, brought to you by Tribooth and Austrian Audio, we dive deep into a fascinating discussion about microphones, mixing secrets, and the unexpected virtues of parallel processing in audio production. AP shares a surprising discovery he made with the Austrian AUdio OC 18 and his SSL2 interface, demonstrating how versatile equipment can mimic much pricier setups. The gang also discusses trends in vocal processing, the move away from flat-sounding mics, and the latest hot trends, from hot chicken to air fryers. Robbo ventures into the realms of advanced compression techniques, exploring how parallel compression (a mixing technique used widely in music circles) can add some punch to your voice recordings. Whether you're a newbie or a seasoned pro, this episode is packed with insights and laughs, offering valuable tips and tricks that could transform your next audio project. Key Highlights: Robbo's mic discovery and its impact on sound quality. Deep dive into parallel processing and its uses beyond drums. Advanced compression tactics and settings for optimal sound manipulation. See Robbo's Parallel VO Compression Examples here: https://theproaudiosuite.com/season-7-bonus-content#episode-17 A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson TPAS April 29 tighter edit, Robbo's mix [00:00:00] And welcome to another Pro Audio Suite. Thanks to Tribooth, the golden handcuffs can be released as you travel with your Tribooth. And don't forget the code TRIPAP200 to get 200 off your Tribooth. Today we're going to be talking about, well, a few tips that we've learned over the years. probably should kick this off because I, uh, had a, made a discovery, [00:01:00] um, this week. Because I had a session, it was actually late last week, come to think of it. But it was a session I was doing with, uh, in the morning. And in the afternoon, as I just shut down the studio, I got an email saying, Oh, can you redo this line? And I thought, well, I can't be bothered firing it up again. So what I'll do is I'll use my laptop. through the SSL to out of the booth because I've got a mic in there that goes through there straight to the laptop. Yeah, firing everything up. And I've actually set it up with the 4k button switched in. So which mic is this again? The OC 18 OC 18. Okay. Got it. Yeah. So, I sent the file off and then I got the reply of the email saying, if you changed your, if you change your settings or something and uh because if you have, I like it better. Can you continue using whatever you're using now? Okay. So, what I I'd realize there's two things at play here. One was I've been playing around with uh the 41 six and the OC 818 because the [00:02:00] OC 818 was going through the Neve, the 1073, and the 41 six was going through the grace and I just changed them around just for an experiment and I forgot to change them back. So he was getting the 41 six through the name. So it was a bit more midi full. Yeah, creamy, chocolatey, whatever. Right. Um, but I changed them back the next time I said, I'll send you two files. I'll send you what you like today and I'll send you what you historically liked before. Uh, we've 41 six with the grace. But having said that the OC 18. Through the SSL2 with the 4K button pressed in. Sounds remarkably like a 41 six through the grace. So they stand in for each other. Extra high end boost. It's bizarre. But the thing is, I was kind of thinking, okay, so I see the stuff on these threads on Facebook all the time. Should I get this mic? Should I get that mic? What should I do here? Which one should I get? And it's always like, get [00:03:00] the, um, you know, the 41 one six and a TLM one oh three. My tip is get an OC 18 and an SLSL two. And then you've got both. You've got a large diaphragm without the 4k pressed in. And then you've got this hyper sort of 41, six sound with the 4k, but it's hard to beat. Yeah. It's hard to beat the versatility with that setup and well, not, it's not hard to beat it, but it's hard to do it that simply, you know, to have a single push button that essentially changes mics, you know, and then, and then with the button in there and then with the, yeah, with the, with the pattern switch on the OC 18, you have this proximity effect. Yeah. Changes, you know, you can change, you know, you're, you're good to go. into hypercardioid and it'd be pretty Yeah. But this thing, this is, this is it. This is the OC 18 with the 4K button pressed in. And you can hear, like, it's really, really cutting. It does sound like a Well, to me, it sounds I gotta say, I mean I'll bet, I'll bet one of the problems is you get too much into the [00:04:00] OC 18 because it doesn't have the long tube. So really, it's like you want to be here, but if you get away from the OC 18 with the same distance that you would be from the 4 41 6 and you put it in hypercardioid and pop in that 4k extra, you know, like mid range, high end. Yeah. And yeah, you'll be, you'll be getting to that cut through anything sound. Yeah. Yeah. Yeah. I think we are so accustomed to not a flat sounding mic, right? Like we, the sound of voiceover is not a flat mic. Cause we, we moved away from a flat mic when we left ribbon mics, you know? It's the same with our food. Everyone wants like overly salted food. Yeah, or spicy. Dave's hot chicken. Hot chicken this, hot chicken that. You guys get the hot chicken trend in Australia? Oh, we get everything, yeah. Hot, hot, hot. The big, the big trend I reckon here, well, probably everywhere in the world is air [00:05:00] fryers at the moment if you're talking food, isn't it? Yeah, yeah, yeah. The air fryer. I got one in my garbage. I don't want my air fried. Well, that's cool. So, so that's your kind of, I mean, you know, that's a pretty nice secret weapon. Now, I'm wondering what you would get out of the CC8 if you did the same exact experiment. That could be interesting. I should try that one. For travel. Uh, if you wanted to have a travel, uh, solution, yeah, but I've got the CC, the CC eight with the CC eight was sounding a lot like your OC eight one eight when it was in the porta booth. Wasn't it? It was in the portabooth. Yeah. In the portabooth and the car in the car and it sounded a lot like the OC eight one eight, which is like crazy. Yeah. It's very cool. I like it. You should change your name from Mr. Big balls to Mr. Rigg. I reckon. Okay. Mr. Rigg. Mr. Is that your tip? That's my tip. I like, I reckon that should have been your tip. That, that car one, that was, that still gets me. Yeah, yeah, yeah, yeah. That's amazing. And I, I did send that file off to [00:06:00] a guy called Chris Gates, who he's a bit of a fan of the show. He's an audio engineer here in Melbourne and he. I love the guy, but he's always cutting you off. Gatesy. Oh, there you can see the Chris Expander out there. Shut the gate, the horse is bolted. Yeah, that's right. Come on, Robert, give us this. Give us the source. Can I shit? I was hoping you wouldn't going to call me. Give us a source connect one. Yeah, just avoid airports. There's your tip. Traveling too much. I don't, what have I, um, ah, now I'm full screen. No, the pressure's on. I'll tell you what, I'll, I'll throw one out there and, and, and since I was going to do a plugin one, but listening to AP, um, Because the idea of this was we were going to do one about voiceover that we use every day.[00:07:00] Um, so there's one that, there's one that I use every day. That's probably a, it's, it's a musical thing, but I, and I don't know how much it's used in voiceover. Um, but a parallel, but a parallel bus on your voiceover. So when, when you're, when you're mixing something with voiceover, you get your, your voiceover set up nicely. Um, so that it's, it's, sorry, hang on one second. My, this is one of those things where I have very, very little experience with, which is parallel processing. Yeah. I've done a lot of parallel drum. I I'm very new to the, to the concept of parallel processing. So, so basically I'll go back. Cause I thought Pro Tools had stopped. That's all. Um, uh, I'll go back to the beginning. So mine's more of a musical thing. Mine's something that musicians use a lot. And, and George was, sorry, Robert was saying before, like [00:08:00] drums is a big thing where, where musical mixes will use parallel compression. But the idea is that you get your, your, For me anyway, you get your voiceover set up nicely so it's nicely compressed and sounding with a nice EQ. But then what you do is you send that track to, it can either be another track or a bus, whatever way you want to work. For me it's a bus because I've usually got layers of voiceover so I just send it to a bus. And on that bus you heavily compress. And you can manipulate ReaCue to whatever you want to do to get it to mix in. But the idea is that once you've got it set up and you've got that heavy compression going, you then drop that signal down, but then mix it back in so that it's just It's not there up front, but it's just making that voiceover lift and it's giving it that enough kick to punch through the music and sound effects and everything else that's going on. But because [00:09:00] that original signal is still fairly dynamic, you've got this other compressed one that's mixing in underneath that gives it enough punch to punch through. Does that make sense? I get it, I get it intellectually, I just, it's one of those like, it's like a tool, that's always been in the toolbox, but I've been afraid to Open it and use it. I don't know why. I just, I don't have that experience. You are doing parallel gating right now, except one of your gates is set to nothing. Yeah, that's true. I am mixing a mix of wet and dry. So, that's essentially what I'm, I guess that's what parallel processing is, right? It's pretty much. Some of the processing, some of the not. There's, there's those who argue that it's kind of like almost the same thing as just getting the right settings on the, Compressor and I've messed around with it And it seems like you can kind of get the same stuff But I would say that a parallel setup is way easier to dial in I can And you can get like some pretty, especially on drums, where like nothing ever falls too far away, [00:10:00] but it feels like you're never squashing the top. That's right. And it is just easy to get like, I've really only used it on drums, um, but most compressors these days, most plugins, even like the LA 2A copy of this, that, or the other thing, Almost every plug in manufacturer now puts a blend knob on the end of their compressors, it's so popular. So it used to be this trick, you'd set up the same processing on two channels, and you'd have to get the same latency so that they phase perfectly, and now it's like one knob. And most, most compressors do this. I mean, I'm used to parallel processing, quote unquote, of being something we use in, in, when we're dealing with reverb or delay. Because, of course, you need to have Dry, or if it's only reverb, there will be insanity, right? It would be unintelligible. It'd be Nick Cave. So I'm very used to Did you say it'd be Nick Cave? I said it'd be Nick Cave. Nick Cave is, he's super, super wet. [00:11:00] Right, right. Uh, reverb. His stuff is, am I right, Andrew? Like Is it Nick Cave? In what respect do you mean with Nick Cave? He's got a bunch of effects and stuff. Their mixes are like super reverb y. Super wet. Oh, God, yeah, yeah, yeah, yeah. I thought you were making a joke because it sounds like he's in a cave. Maybe that's why he's in a church. You should do a cave recording, Robert. Um, so, um, yeah, so overly wet would be, uh, would be, uh, too much. So, so that I understand, I understand the concept. And so when we're talking about processing, we either talk about what? Serial or parallel. Is that where the, are that the two versions of Waze? Technically, yeah, it's like insert or aux send return is the way I think of it. But that's what's interesting now because a lot of insert plugins have a blend knob or a dry wet. Now they're really acting more like a parallel processor. Yeah, I don't, I don't find that quite as effective. And I, Robert said that before, and I would agree with him. I, I, there's something about the blend. [00:12:00] I think you can be more accurate with, with a, with it coming from another bus. You can, and it's easier to, if you've got a couple of, Plugins in blend mode, um, it's easier if it's on a separate bus, it's actually easier to, you know, if you need to, to ride it a little bit, it's easier to do that too, I suppose. It's easier to control. Maybe it's easier to automate. It's on a fader, I mean, it's, it's nice to have it on a hundred millimeter fader than a knob. I'll say that. But unless you're doing a setup where you're doing one heavy and one mild compression. But if you're doing one, like, the reason why I think it's less impressive on the, um, the, the blend knob, because most people set the compressor to not be too heavy. And then they only blend in a little of the straight, but really if you wanted to do more obvious parallel compression, you would put your compressor at, you know, 10 to one with a low threshold and crush it by 20 [00:13:00] decibels. And then you'd only blend in like 10, 5 percent of that compressed signal, that completely crushed signal. And the majority of it would be the dry. And then you'd have a natural sound with the, like that benefit of like, it just doesn't go down too far. Um, I'll tell you what I'll do. Do you play around with frequencies when you, when you're doing this stuff though? Because I, you know, like when you sort of get the stereo split and you're looking for gaps in frequencies where you can put a, you know, an EQ'd voice where it will sit and pop out. Is that what you're doing with this as well? Especially in radio imaging, I'll play with the EQ on that squashed parallel bus. Absolutely. Yeah. And the parallel bus itself will just like seem like you crush it enough, it'll seem like it loses low end. Because that's where like a ton of the energy is. So when the signal comes in and your brain is going like oh, I'm ready for that low end and the compressor goes nope, you're not going to get the volume. And then you hear the, [00:14:00] so compressors have a, can have an EQ like effect. I'll tell you what I can do. AP and I just finished a re launch package for a station in Singapore called 1FM. And we did a, we did a monster re launch promo, um, sort of, uh, you know, spruiking that the re launch was coming. And it's got this big operatic music happening underneath it and I've added in, you know, lots of impacts and whooshes and stuff to give it some movement and some, you know, Typical FM Gravitas. Um, but what I might do is, I'll put up a mix, I'll put a link in this video if you're on YouTube or in the show notes if you're listening to the audio one, I'll put it up on our website. Um, and I'll do a mix, I'll put the full mix and then I'll do a mix without the parallel bus. Uh, Uh, AP's voice and, and you'll just see how, how much it, it's [00:15:00] still there. You can still hear it, but the, the parallel bus, just when, when something impacts and hits, it's still sitting there. It's still right there in your face. That's the best way to explain it is to literally, I was going to ask you if you had examples of, of, of where they're being, but that would be a cool idea. I'll paste that up. Yeah. Yeah. The, the, the parallel compression thing is much more. Um, kind of known in, in drums, I'd say then using it on voice. I I'm sort of, it's something I haven't really talked about and I, and I do a podcast, um, on radio imaging with the guys from imaging blueprint who we've had on this show before. Um, but it's something that we never talk about. And I, and I was kind of interested to know, is it just me that does it on voice or is it, is it, is, is it sort of. I mean, I can't imagine, I don't really use it in, in commercial work, I suppose, unless I kind of, you know, unless you get to that point where you think, shit, this needs a bit more kick, but it's certainly not [00:16:00] on, on everything, but in it, I reckon I can't think of too many imaging projects that I've done. Done lately that I haven't used a parallel voice bus on, so. Yeah. Well, I'm in the comments. In the comments. If you use it, let me know. Yeah, yeah. I, I'm much more familiar with the concept of serial compression, in fact. Yeah. I, I don't even know if I still have it. I wish. I hope I do. Um, but I had this awesome, um. Compressor called the FMR Audio RNC, which stands for Really Nice Compressor. It's like a little third of a rack space deal, and they're like 200 bucks, but they punch above their weight. I mean, those are from like the early 2000s or something. Yes, yes, yes. So I used to have one of these and I had this in my mix bus quote unquote on my I used to do production mixing on set on film sets. So this was on your stereo master? Is that what you're [00:17:00] saying? Yeah, I had on my stereo master. That's a mono compressor. Did you have two of them? I can do stereo. Yep, it's got stereo, it's got two in, two out. Oh shit, I didn't remember that. Oh yeah, there you go. Cool. Two in, two out, and a sidechain. Yeah. So, um, so I would run that on my stereo bus, and then I would just press super nice, this button right here. And, what super nice does, and I think they explain it a bit, a little bit. RNC achieves high performance at a low cost by using a microprocessor to replicate or replace discrete side chain components. Um, so instead of having a lot of discrete parts, right? Resistors, diodes, things that make like an LA 2A. Amazing. Um, with chunks of software, thereby reducing the component cost. It still processes the main audio and analog, avoiding the problems associated with digital audio conversion. Even the problem of scratchy pots are avoided. No audio flows through the pots. Um, and so, and basically it's using [00:18:00] VCAs. Internally, right? Yeah. So it's this really interesting design of combining digital and analog, but what was cool about super nice is the really nice button. Do does it change? So what super nice did was, um, I did some reading about this while, when I first bought it, so 20 years ago, but what it did was you're, you're sequencing a series of compressors, so, and they're all at different ratios, right? So you can hit it harder and harder and harder. And it kind of hides the, um, coloring that you get from over compressing, you know, because st Doesn't that sound like a knee staging? Doesn't that sound like a knee where it, knee, I guess it does sound like a knee. Yeah. Gets you into it gradually instead of having just like a, like a point, it curves into the compression eventually where it's like flat. It's kind of a big complicated way of saying i's like, you do a soft knee. I mean, uh, I, I [00:19:00] guess. Talking, talking about radio imaging again, but for me, like, I don't have on, on my voice on Andrew's main voice track. If we go back to that promo that you'll hear an example of, um, there's not one compressor. There's, there's a sequencer plugin. So it comes in and it goes through, uh, uh, the first one is a CLA two way, which basically just takes everything that's sort of too sort of loud. Brings that down. Yeah. Then a bit of EQ and some other processing, but then it'll go through, um, the, um, Oh God, what's it called? Uh, another waves compressor. Anyway, it goes through that, but then that's got a bit of a faster compressor maybe. Uh, yeah. Sometimes I'll use the Renaissance, but the main one I use, I can see. See it, it's, it's, um, I'll put it in the show notes. Um, but it's got a faster attack and, and, and a, and a and a quicker release. So, yeah. Then that's just dealing with anything that's still a little too [00:20:00] hot and sort of bringing that down. And then in the, on the master bus for the voice where everything comes together, all, all the processing and, and, and the, yeah. parallel bus and everything, there's a bus compressor on there as well. So, so you sort of, it's the same idea by the sounds of it as what you're talking about, George is, it's not just a compressor, it's a series of compressors that give you a bit more control as you're shaping that, that waveform, I guess. Yeah. Cause I guess the guys, a lot of guys in music, they use like a 10, 70, uh, 10, um, LA to 1176, 1176. They'll use them both because they both do different things and they'll stack them together. But they're serialized. They're one and it's going through one and then it's going through the next. So I don't know if this is still going on with mastering, but um, at least 10 years ago, mastering engineers were starting to just clip the ADD converter just a little bit and clip this other thing just a little bit [00:21:00] and they weren't even, they were just literally purposely clipping things by half a DB. Yeah. And that's such a thing now that there are literally clippers. Yeah. Yeah. There are plugins that are clippers. Yeah. And, and also I remember the first time that I had anything mastered. So I did this recording on my cassette A track, mixed it down to dat. I was interning at, at what was it called? The classic digital mastering, which was funny because they did a lot of classical music too. But, um, so it's like, you know, like, They did a free mastering session for this thing. And the guy loads it into sonic solutions and then just, he's like, you know, he finds the peak and he's like, whatever, we're going to bump. Like I was, I hit it perfectly. I was like zero on the debt, you know? He's like, whatever, we're going to raise it up by like three or six. I'm like, you're going to clip it. And he's like, that's fine. They'll just be loud. That's it. Yeah. Just like, like there was no L one back then. It was just like, no, there was no maximizer at the top. Yeah. Okay. No, I is [00:22:00] one, um, the com, the compressor I like on ap. The second one, by the way, is the DPR 4 0 2, the blue one with the red LED lights that sort of go vertically. And you probably don't know it's in the wave. No, that's one of their newer ones. It's not an emulation or, or is it the b Yeah, it's an emulation. It is an emulation of hardware. 'cause I used to have a hardware one in a studio I used to work in. Yeah, it's what's what's the name of that company? bb. It's not BBE, but bb. Yeah, I think it is. BBE. No, it's not BBE because BBE makes the exciter that's like audio crack and it ruins your mix. I'm just, I'm looking in my audio suite, looking in my audio suite plugins and it doesn't say BBE, DPR, or anything like that. It takes your daughter out on a date. Here we go, hang on. Oh, I can't, can I share my screen? No, I can't. Oh, I think you can. Hang on, it's coming up. My poor old Mac's got Pro Tools running and four source connections going and God knows what else. It's [00:23:00] desperately trying to open the plug in. I was trying to show it earlier. Your Mac is buying fans off Amazon right now. Exactly. Well, well, well, we were getting onto the tangent of knee, so I just wanted to show you. Oh, you got it? Hang on. Hang on. Let me go to that. This could, this could blow everything up, you know. Here we go. If, if, if the, if the episode suddenly finishes, you'll know why. Andrew, just hit the end, the end thing. And if I go present, share screen. Here we go. Share screen. Sharing screen is easiest with two monitors. Yep. Share screen. And then you have to choose the window or browser tab. Okay, and then window, let's just go here, share. There we go. Can you see that? Yep, it's working. I just have to add it to the show. Hang on. There you go. There you go. There it is. Ooh, DPR. Yeah, that's the name of them. So, no, no, BSS. Is that the real name? BSS is, it's not BBE, it's BSS. BSS. There you go. So, so for, [00:24:00] for AP on this, I, I have a, a sort of a bit of a fast, well, a reasonably fast attack, um, and, and a similar release, but, but if you were watching this working for AP 3 dB gain reduction light would be blinking sort of, you know, indiscriminately on and off. It's not working very hard, but it's just cleaning up those, those things that are a bit higher. Which means that as you, as you work your way down the stack of compressors, you can actually compress a bit harder. Because there's nothing that's catching that's being compressed really hard, you know, so you sort of, you gradually leveling it out, which means that by the time you get to a limiter, you can actually limit really hard, because there's no peaks that are being caught and squashed radically. It's all sort of being just evenly squashed nicely. So, um, that's the thought process behind that. So I was going to show, uh, go ahead, go Robert. I was going to say, here's a setting that no one thinks about that I think can [00:25:00] make a big difference with some of the really high end compressors, like the George Massenburg. Um, you see every compressor probably has an input, a threshold, attack, release, and output, maybe. But you don't see hysteresis on a lot of compressors. Now you have to explain that now. What does that mean? You've opened that can of worms. Yeah, yeah, yeah. I think it basically has to do with like having two thresholds. I'll make myself comfortable for this. Yeah, sit back. One threshold to trigger the compression, but the other threshold that it has to maybe follow below before it, you know, compresses again. I have to re remember this, because I don't own one with hysteresis. I mean, I see this knob on plugins. I see, I see Certain plug ins, a compressor will have a hysteresis. No, I think logic hysteresis hysteresis hysteresis. I've never known I'll go with you He hold my beer says [00:26:00] Robert As he dives into this subject So it has two thresholds of essentially a low threshold and a high threshold Right. I think so. I think it's something like that because because I believe you can also have it In a, the same word, but with, uh, with compressor, with gates, you can have it too. What's the wave plugin that does that? Is it the MV one or something that's got a high and a low threshold? It sounds like the MV one there, there was one that one that Bob, uh, there was one that had a whole bunch of thresholds. It was, was kind of like what the RNC does. Um Mm-Hmm. . That was back in the day and it was that mastering engineer from Florida that put it out. MB two, an expensive piece of hardware, I'm assuming. Here you go. Hang on. I was a plugin. Okay. Yeah. Yeah. Hang on. Let me tell me if this is the one you're thinking of. Is that with a high threshold? Well, that definitely has a high and a low level. [00:27:00] Seems and that's it. Well, it's at a low level. It's sucking it up. Is this an expander and a compressor? It's, yeah, it sort of seems to be both in the one. But that's why I'm wondering whether that's what Robert's talking about. Is that the, is that what you're thinking of? Um, if I can find, here, I'll show you a picture of the definite compressor I'm thinking of. Um, because, GML, let's see, I gotta spell it out. This has become like a really deep dive on compressors, actually. It has, hasn't it? It really has, yeah. And it's made it nice. I'm looking across here, looking at my 2254 and thinking It doesn't have a history. It's got a lot of stuff in it. No, it doesn't, but it's got lots of different, um, a couple of different limiter, limiter, limiter recovery, fast attack. Is that a Neve thing? Release hysteresis. It has to do with the release timing. So here's, um, if I was to, I will find it. Let's see here. [00:28:00] I'm zoomed in too much. Okay, so how do I share my screen now? And bottom. Present. Present arms. Share screen. If Robert disappears, we know why. Share screen. Share screen. And. I guess we'll just do this. Nope, I'll do that. That'll be easiest. This one, here we go. So add it to the stage and here it is. Here we go. Do you, uh, do you, do you see that? Yep. Yep. And, and if I, uh, zoom in on this thing. So let's see here. View zoom in. How far can we zoom in? It's such a thing. It's called shortcut. Do you know that? Don't you? There you, I I just did it. I didn't, I think it was . So you go, um, timing, release, hysteresis. And you notice it has a setting here and a setting there. And it has to do, so, maybe, in here, let's see, we're going to find So George Mastenberg is probably one of the most renowned [00:29:00] hardware designers of the And what is that, like a 4, 000 compressor, probably? Yeah, I mean, everything he made is absolute, you know, money is no object. I mean, check this shit out, Crest, Crest Factor. Crest Factor. Timing in release histories is to precisely control dynamic features of musical performance when we would arbitrarily use your familiar features such as They don't tell us what it is, they just say it's cool stuff. So Maybe he doesn't really want you to know. Yeah, probably. Doesn't want to give the game away. Go and spend 4, 000 and buy one, Robert, and then come back to us. Exactly. I'll expense it. Yeah, I'll expense it, no problem. Source Elements won't mind. You just won a couple of awards, you'll be right. Well, when you were talking about me, I just wanted to show you this compressor that I probably don't understand how to use, but I've been using for 15 years. And it's the, it's the Dynamics plugin called AU Dynamics Processor. So this is the plugin that comes on Apple. It's the Apple plugin. It's the Apple Dynamics plugin. And the [00:30:00] thing about this plugin is, is it, it doesn't have a ratio. It has a ceiling control. And I still don't understand. So it's like a limiter? Yeah, that's a limiter thing. Yeah, it's very strange, but the bottom line is when I use it A ceiling and a threshold can be similar, but if you think of it, if you have infinity to one ratio and a threshold, then your threshold is your ceiling. Oh, okay. Okay. Now you've confused me, but I'll believe you. If the ratio is infinity to one, meaning you shall not pass, pass my threshold. Yeah, it's brick wall. Then your threshold is the ceiling. Right. So this funny little plugin, right? Which, which I've been using for many, many years. It's got attack release and a master output, normal, normal stuff. It's got an expander with a threshold, totally normal. You know, I use this. It's very handy. You can do a nice, gentle expander. Very, very useful, right? Then you've got the threshold for the compressor [00:31:00] and it has a headroom setting, not a, not a, not a ratio. And then you'll notice it's absolutely A knee, what you call it, a knee style, right? Yeah, that's, yeah, that's, it's a knee, James. And as you approach, as you approach brick wall, right? Well that's brick wall. Yeah, that's brick wall right there. Right. So it's very weird. I never really understand how to conceptualize the headroom. I love the style compressor, but it, well, MDT was, yeah, it works great. This is a great way to do compressors. And this is the same way MDT. Yeah, I think MDT was multi-band dynamics. And you got one of those curves for every single frequency band. Yeah, well they have a multiband version of this too, where it gets really interesting. Yeah, there you go. But considering that's a freebie, and it just comes on Apple, I mean, it's pretty damn good. What you made there, by the way, is known as a That thing you made there with the gate and the compressor, it's known as a [00:32:00] compander. And you'll see that on some, some, uh, like the Yamaha O2, I think, had a compander. It was basically your gate and expander together. Mm hmm. Mm hmm. Yeah, I think pandas have almost become extinct from you don't see them. I don't know. That's because not enough of them come anymore and and and Yamaha wants them all back from all the uh all the zoos. Yeah, it's that bamboo diet that they have trouble with. Yeah. [00:33:00] and on that note, I think we should off. Oh, man. That is definitely the end of that episode. I love how our episodes really do not have an end. They just go, boom. They really don't. It's like you're walking along, you don't see the glass door that's actually shut in front of you. Well, actually, there's a podcast I like, and they end the, the way they end it is one of them tricks the other ones into saying goodbye or bye. And so he'll say some sentence and then slip in the word bye. So it fits into the sentence, so it'd be like, So I realized it was very hard to come byyyyyyyy and then they would all say bye. And that's how they'd end the episode. Because like, nobody knows how to fucking end a damn episode. So you just ramble on, and I'm like, How do we end this fucking thing?

In this special episode of The Pro Audio Suite, join hosts Robbo, Andrew, and George as they dive deep into the latest advancements in remote collaboration technology with Source Connect Four. Joined by special guests Rebecca, Ross, and Vincent from Source Elements, the team discusses the game-changing features and improvements that make Source Connect Four a must-have tool for audio professionals. The episode kicks off with introductions and sets the stage for an in-depth discussion on Source Connect Four. Celebrating the recent accolades and advancements in remote collaboration with Source Connect Four, the team explores the groundbreaking features, including the Auto Restore/Replace function, which has been improved and made more user-friendly. They also delve into the future integrations with Nexus and other platforms, promising further enhancements for audio professionals. Discover how Remote Overdub Sync revolutionizes the overdub process, ensuring seamless synchronization in remote recording sessions. Exciting news for iOS users! Learn about the upcoming iOS compatibility for Source Connect Four. Wrapping up with congratulations and gratitude, the team reflects on the insightful discussion and looks forward to the future of remote collaboration in the audio industry. Tune in and stay ahead of the game with Source Connect Four, the ultimate solution for remote audio production! A big shout out to our sponsors, Austrian Audio and Tri Booth. Both these companies are providers of QUALITY Audio Gear (we wouldn't partner with them unless they were), so please, if you're in the market for some new kit, do us a solid and check out their products, and be sure to tell em "Robbo, George, Robert, and AP sent you"... As a part of their generous support of our show, Tri Booth is offering $200 off a brand-new booth when you use the code TRIPAP200. So get onto their website now and secure your new booth... https://tribooth.com/ And if you're in the market for a new Mic or killer pair of headphones, check out Austrian Audio. They've got a great range of top-shelf gear..  https://austrian.audio/ We have launched a Patreon page in the hopes of being able to pay someone to help us get the show to more people and in turn help them with the same info we're sharing with you. If you aren't familiar with Patreon, it's an easy way for those interested in our show to get exclusive content and updates before anyone else, along with a whole bunch of other "perks" just by contributing as little as $1 per month. Find out more here..   https://www.patreon.com/proaudiosuite     George has created a page strictly for Pro Audio Suite listeners, so check it out for the latest discounts and offers for TPAS listeners. https://georgethe.tech/tpas If you haven't filled out our survey on what you'd like to hear on the show, you can do it here: https://www.surveymonkey.com/r/ZWT5BTD Join our Facebook page here: https://www.facebook.com/proaudiopodcast And the FB Group here: https://www.facebook.com/groups/357898255543203 For everything else (including joining our mailing list for exclusive previews and other goodies), check out our website https://www.theproaudiosuite.com/ “When the going gets weird, the weird turn professional.” Hunter S Thompson   loading Summary In this podcast, the Source Elements team celebrates their success and discusses the latest updates to Source Connect 4, including support for Dolby Atmos, improved user interface, and the Restore Replace feature. The software has been redesigned to simplify remote connections and enhance the user experience. The COVID-19 pandemic has accelerated the adoption of remote recording technology, making it a necessity in the audio industry. The podcast also explores the potential integration of Source-Connect and Nexus, as well as the benefits of Source-Connect's remote overdub sync system. Finally, the host expresses gratitude to various individuals as the show concludes. #SourceConnect4 #DolbyAtmos #RemoteCollaboration loading loading Timestamps (00:00:00) Source Elements Wins NAB Best in Show (00:01:40) Source Connect 4: Dolby Atmos Support (00:05:52) Source Connect 4: Improved User Experience (00:08:36) Recorded Files in Pro Tools (00:10:08) Port Forwarding Simplified in Source Connect 4 (00:11:10) COVID's Impact on Remote Recording Technology (00:16:11) Streamlining Remote Audio Engineering (00:20:03) The Future of Source-Connect and Nexus (00:22:27) Remote Overdub Sync in Source-Connect (00:24:27) Farewell and Gratitude Transcript : Y'all ready? Beat history. : Get started. : Welcome. : Hi. Hi, hi. Hello, everyone to the pro audio suite. These guys are professional. They're motivated. : Thanks to Tribooth, the best vocal booth for home or on the rote voice recording and austrian audio making passion heard. Introducing Robert Marshall from source elements and someone audio post Chicago, Darren Robbo Robertson from voodoo radio imaging, Sydney tech to the Vo stars, George the tech Wittem from LA and me, Andrew Peters. Voice over talent and home studio line up learner. : Here we go. : And welcome to another pro audio suite. Thanks to tributh. Don't forget the code Tripap 200 to get $200 off your tributh. And austrian audio making passion heard. Just imagine a New Zealander, an American, a Canadian, an Australian and a half Englishman walk into a podcast. It's just happened. We have, apart from Robert Marshall, we have Rebecca Wilson, we have Ross and we have Vincent from source elements. : Ooh, here we are. : Wonderful. : An Argentine too. : Can you talk from our laughter who is here? : Yeah. : And welcome to the party in Las Vegas, by the sounds of it. : Now, we should say the award winning team. : Yeah, I was going to say there's a bit of a party going on because there's a new trophy in the cupboard. By the sounds of things, there is best in show. : We're holding it up right now. It's brilliant. Shining blue and it says, nab. Best in show. And it's gonna go under Robert's trophy case. : Exactly. I don't have a trophy case, but I have a trophy shelf. : Trophy shelf, yeah. : So, Phyllis, in best in show for. : Remote collaboration, remote production. Yes. : This is the new baby source connect four. Yeah. : Yes, it does. Atmos, amongst other many cool things, source Connect used to do and more than it does now. : So go and fill us in on the atmos thing because that's a massive leap forward. : Yeah. It allows you to have all sort of the raw atmos stream, so not just a rendered mix going across a remote connection, so someone can listen, but instead it gives you the flexibility to send what's called the bed. Then all the objects, these are all separate audio channels, as many as it will be, as many as 128 and the time code. And then most importantly, the metadata that steers all these objects around so that whatever the receiver has, as Atmos does, is it just conforms it. It renders it specifically for their speaker setup. So you could have a stage mixing a film with, say, 20 speakers and a director reviewing that mix in real time over source connect with, say, twelve speakers or even ten speakers. And maybe another person's connected at the same time and they just have headphones. So they're getting it as binaural. : It takes a lot of the thinking out of the equation, right? You just let the renderer on the remote side deal with the translation. So just lets the host, or the mix host, if you will, put one stream up and have it divvy out to everyone accordingly. : So everybody's end basically decides what it's. What it wants to hear. : Exactly. : Yeah. : Right. : Well, no, they'll hear the same thing. They'll just experience it in spatialization differently. : It'll be optimized for their speaker set up because it'll be coming out of a renderer directly on their side and. : The spatialization would be compatible from what you hear in binaural or 5.1. It's what someone's hearing in nine 1.6. But just with that lesser detail, I. : Guess the end goal is sort of like listening parity, which is almost impossible to achieve because everyone's going to have different speakers and configurations. But this is the most optimized version to get closest to that. : It's not like we're dropping like, you know, one of the voice channels so you only hear one side of the conversation. : It's the purpose that Atmos was made for so that there'd be one deliverable and then whatever your speaker set up. The person with the really nice speaker setup doesn't have to compromise for the person with the really simple speaker setup. : And the other way around. : And the other way around. The other person with a simple setup is not sort of burdened, in a sense, by having something that they can't play because of someone who has a really fancy system. So Atmos is like a deliverable that lets you play back anything from stereo all the way up to, you know, huge speakers arrays and 15 and 20 speakers even at home. : I think I have kind of an alternate kind of take on this which is basically like a bit of a tangent from that, that angle of it, but it's basically like these. Getting into a really tuned listening environment is a really expensive moment. You only get so many hours in there and the ability that now you could be working on a laptop in headphones through the Dolby Atmos renderer and building a mix towards your big mix session where you're going to actually sit in that room. That's kind of like what I think is at stake. And what's really exciting about this is you could be working on 5.1 before when you were working like in a stereo setting is you weren't able to know that it was going to translate. Exactly. This is kind of, or even at. : All, you kind of use tools like I had the, the waves thing that lets you take five one and make it binaural and you'd kind of have an idea. : I think most engineers I know would say they do their best work when like they, the client leaves and they get to work on something by themselves in a bit. So now the ability that you could be working towards this grand big spatial mix in a laptop setting and then transmit that to a listening environment that you can get into or physically get there, that's the real exciting prospect. : It kind of feels like equity, really like true equity. : Let's bring it back into more of the realm of our listeners, I guess. And AP and I have been having a bit of a play around with source connect four. Thanks very much to you guys. And the biggest step forward I see is firstly the GUI. You know, it looks so much more SmIc, so much more professional, so much more user friendly. But in terms of operation wise, the biggest step forward is the old queue manager, which now becomes restore replace. In source connect four we were like. : You know, we've spent 20 years honing technology and then we thought now we need to hone the user experience. It's really an internal focus for all of us. : Now the queue manager so often was just, people never read the manual. It didn't, it didn't work automatically enough. And then people would just go, what is this thing? I don't know. Shut it down, let's get on with our session. It wasn't something that they thought to ask for because they never had anything like it before. : It's weird, I've done so many sessions where I've said, are you using Q manager? And I get the answer, no. What's that? : Yeah, we just have one extra step to go, which is to be reading your session file automatically, your pro tools or logic or other session file, whatever we can. And then you honestly wouldn't have to do anything. And you've got restore happening all the time without needing to configure anything. : For me, the other awesome one would be for it to work even after I've shut down source connect because there's so many times that you shut it down and you go, oh, I shouldn't have done that, should I? : But you know, well we have reconnection logic built in now or like a new method where you know, if somebody does shut down, you still got work to do, you can bring it back up and it'll reconnect and it will restart. But we also, you know, if you shut the program down, then it can't do it anymore. That's the same. : But as far as, like, uploading the data maybe ahead of time or right away so you don't have to wait for the talent or worry if the talent shuts their system down. : This is maybe the most important thing about source page four. We've redesigned it from scratch, completely rewritten every line of code so that we can add these features that we know everybody wants. So the plan was the very first version on the first day. It's pretty much feature to feature for source connect three because we just need to get it out. : Right? : Yeah. : With doggy connection. : Okay. All right. Some more extra cool stuff. : There's a lot of cool stuff to. : Get you to want to upgrade, but then what you're talking about, like, hey, let's upload, you know, the whole session to the cloud so that the engineer can get it later on. All of that stuff can come now because with built hooks into all of this technology. : Sure. Well, let's pick through a few of them. AP and I were talking, we were looking at that restore replace page. AP noted the recorded files area and was wondering if that was sort of a hybrid of the old source connect now where you could actually record directly to the cloud. Is that the case, or is that actually looking at my. Well, in my case, my pro tools folder going, these are the files you've recorded so far. : Exactly. Those are the files that you've recorded in Pro tools. What I would originally say the Qmanager or the auto restore. Auto replace system recognizes as ones that it knows what they are and who they were connected to. And if there's any audio to fix or replace, restore or replace that it can do it. So those are your recorded files. And then the other one you might see in there is the uploads, which are files that maybe someone else recorded that you are uploading data to, to either restore someone else's file or replace data in someone else's file. : Okay. Because I think AP, you sort of liked the idea of recording in the cloud, didn't you? : Yeah, that's one of those features you're. : Technically recording there, and we can make that recording more available. It's actually, I think source connect three had that, but it had some flaws to it. But exporting the connection, if it's not there already, will be there. : AP has been playing with twisted wave too much. That's the problem I've been playing. : Yeah, indeed. Just going to ask about port forwarding. How does that change? Or has it changed in source connect four? : I got this one. How does that change? No more port forwarding is necessary. : Yeah. Nice. : Basically. : We find a way through your connection path and make it work. You don't have to go into your router and figure out anything complicated. You don't have to call us in a panic. You decided to take a vacation, and then you get called for a job. But nothing like that. It's just gonna work. : So source stream is available. Mac and windows. And port forwarding, especially in the pro version, is available if you want to use it. It does kind of. It's the ideal path for the connection, if it's available. And if you can lay out the red carpet for source connect, it appreciates it, but it's no longer required. : Only very strict networks and, you know, corporate environments. : Yeah. : My question is directed at you, Rebecca, and I'm wondering what hand COVID played in the development of source connect four, the one we're seeing now. : You know, it's still a complicated thing to process. What happened to the world in 2020? We all changed. It was a one of major cultural shift for them, us as humans. And so, of course, that can only be reflected in technology. And the main thing that changed, I would say, for us, is that we realized we kind of know what we're doing with the Internet, which was really nice to find out. It was really, you know, it wasn't a pleasant situation at all, but it was nice to know that we were able to help. That was really satisfying. If you could have called anything in that situation satisfying. And then it said to us, hey, I think that we have an idea what's gonna be needed the next 1020 years, because we've already been doing it 20 years. You know, Robert and I, the team are all young spring chickens, and. : And I have a cane. : We've still got some ideas left. I don't know, maybe just a certain insight that we have from doing this so long. It was like, now the world's ready for us. : I think what happened in the pandemic is a. All the doubters went, oh, remote really does work. And for us, what we realize is that remote is no longer just like the talent's remote or the client's remote, but remote is everybody's remote, and they all have different roles. And how to put those roles together in the most cohesive way became more what SourceConnect four was about compared to what we thought source connect four was going to be prior to the pandemic. : If you think about source Connect, like source Connect pre COVID was something that was nice to have, and then when COVID hit, it was something you had to have, and that changed the whole game. : I thought, well, Andrew, honestly, you and I, you know, we're from the South Pacific, from Australasia. I wouldn't say that source connect was a nice to have. It was kind of a, you know, whether it was source to nature or something else, we had to have something or how on earth we were going to work internationally because plane tickets are expensive and, you know. : Yeah, that's. : I think. : I think so, yeah. But I'm thinking from my point of view, like, as a voice talent, working with studios like you, historically, you just drive it. I go to Melbourne or Sydney or whatever it was for a job. And, you know, you managed to convince people that, you know, you can actually connect with to my studio if I work with someone in Sydney or wherever. But it was kind of a luxury, really. And people would just use local talent, pull up in their car park and go into their booth. But once COVID hit, it was not like that at all. It was a different game. : I think, especially here in Australia, there was a massive resistance to home studios, to the point where owners of studios would refuse to work with remote voice actors because they figured they were trying to steal their work. So. But COVID sort of put a whole new perspective on that, I guess, really, didn't it? : Yeah, and there were people. There were people that were actually literally coming out and black banning talent for having a home set up. : Yeah, that guy's got a home studio. He's stealing my work. : Prior to, like, up to. Prior to the pandemic, or did that subside at some point? : Yeah, I think it was. Look, it was. It was softening, but it was still there. : I think what the pandemic did is kind of shift the focus from the studio to the operator to the engineers at those studios. Right. So I definitely spoke to a lot of people in those places that said they got more work because they were able to do so much of it remotely. : Well, I know that's a fact for a lot of studios where they were able to, like, have engineers at home and at the studios, or just because clients weren't in, they were able to do just more work. Like, yeah, everybody could be put to work. All you needed was more licenses of whatever it was that you were using, like. Like pro Tools and Source connect and whatnot. : Yeah. : The irony of this whole thing. When COVID hit, all of a sudden studios were calling me because they had to get out of their commercial studios and set up at home and asking if I could do tests with them to make sure their source connect was working. : Wow. : Right. Or weren't some talent going to your place just to do sessions? Because they were, you know, they couldn't go all the way to the studio, but somehow they could give you COVID. : Exactly. : I don't know how the rules were, but I seem to remember you were hosting some talent at your place. : Yeah, there was a few that came here because they got out of the city and they were living sort of coastal, so they couldn't get in there anyway. And I was asked if people could come here that were living locally, and of course I obliged. : The amount of tech that was pushed on to pretty much every operator in a remote setting was, I think, probably one of the humbling parts of the pandemic. Right. Because, you know, it was, it was once you have every role get remote, then all of a sudden, like, I know a lot of audio engineers that know nothing about networks. Yeah. You know, like, it's like literally everyone has kind of thrown this wrench of technology and different roles now I got to be it as well as engineering. Well, that's what support was here for. : Yeah, I mean, I was just thinking like literally a big part of like source connect helping in pandemic was just a huge heavy load of tech support. And it wasn't just getting talent on boarded, but it was almost teaching a lot of people like how to work remotely or how to like not just do a remote ISDN, like to freaking have everybody be remote and lots of people routing. Yes. : So you know, all that's kind of, I think that's what source connect four represents. I think a lot of the learning of that is how to streamline exist, make the UI, make it make sense for you so you don't really need to think too much. The getting rid of the eye lock and the port forwarding requirements. I don't know if we talked about ilock, that's the thing. We've experienced that probably in huge volumes right at the start of the pandemic. : What's this? : What is this Iloc thing? : I need something physical and I can't. : Go out and get it. : You didn't need it physical at the time. Another account? Is it going to cost me anything? No, it's a free account and you know, you can't verify or you can't easily set somebody up because there's just more email verifications for new accounts that are created and God forbid the account that you created in source elements, that same account name is not available in Ilog. So now you have two different account names to remember and like two different passwords and. : Yeah, and people are losing their passwords because they use one thing for one account, one thing for another account. : So that's gone. : No more eyelock. : Wow, you heard it here first. : You heard it here, folks. That's right. Exactly. : Breaking news. : Bravo did say that he would like the UI to be bigger. : Bigger, small. : Can't see shit. : Smaller the GUI. : Oh, smaller the GUI. : It would be nice to be able to scale it like I want to see. I love the size of it as it is for now, but even when you've hit that little four corner box and it squashes down to the sort of send and receive meters and then the menu underneath, for me, it still takes up a lot of space on my screen. : And you can make it smaller. Yeah, you can grab the corner and push it in. : We're in the final mile of quality of life improvements. A lot of the stuff that, you know, those sort of smaller bits are just, they're gonna get done in the next couple months and. : Absolutely, I mean, you've embarked on a massive job. But that was one of the observations that I sort of, I did say to rob, but is I wanna see it big when I'm setting up the session and when I'm getting everybody connected. But once everybody's connected, I've got three screens in front of me, I've got my edit on one, my mix on another, and then my third is dedicated to picture for video. Source connect plugins, meters, all the rest of it to keep them out of the way. So the less space that can take up for me, because I really only need to glance up and see if it's metering. If someone says they can't hear something. : Can I throw in a future feature that I don't think is a spoiler because I really wanted. Yep, we plan to separate the UI from the engine and you could run it from like another screen or an iPad. And to me that's the sweet spot there, especially for, you know, people who are running, you know, big installations. They can walk away and, you know, oh, source Kinect five is not working and they can look on their phone. Oh yeah, oh, it's working now. : Right. : Why should they have to go back. : To the machine room and what about integration with Nexus? : I think you're going to definitely see Nexus and source connect integration and just further integration across the whole product line going towards that platform. : I think because I was telling Robert on a previous episode, it wasn't all that long ago, I had a session where I had a voice talent up in Brisbane somewhere. I had a creative sitting in the airport and two guys in the agency here in Sydney, and then the client was also online from, like, Perth in Western Australia or something like that. And there was another talent in Adelaide and it was this massive session. And if you could have seen my poor old thirst screen with meters and everything else going and all the rest of it, it becomes a logistical nightmare trying to remember where you've put everything and who's on what. So combining that all together would be quite impressive. : Can't say exactly what you might see, but I think sort of connect and nexus are surely more communication. : Well, that's actually a really good advancement that you've reminded me that you've, you've put into four. Here is the fact that all your connections appear in the one place. I think that's, that's amazing. : And they cross connect for you. : Yeah. : So they all hear each other without you having to do a thing. : Right. : You can pull multiple outputs, everyone record on everyone on a separate track, and. : You can even give them different inputs. : Right. : Right. You can send them different things, but they will all send to each other. : Yeah. : Can I make it so that person doesn't send to that person? : That's the plan for sure. We want to have a more project based style where you could decide what role is everyone playing? What do they hear? What do you hear? : What do you want them to hear? Who hears what? You can make everyone hear each other in a round circle and you could really play the game of like, tell this story to the next person and when it gets back to you. That is not the story I told. : Yeah, well, it's. I mean, the way you've set it up now, it's almost a well and truly upsized source connect now, right? : I'd agree. In a simple sense, it is like source connect three and source connect now. Sort of merging together and becoming each one, giving the best of what they used to do so you get the benefits. Yeah. : The autorestore replace being like, now you actually truly have an acquisition system that's like, bit accurate, right? : Yeah, yeah, exactly. : Never mind the browser, you're not going to get that there. : We know where every sample and frame is. : Speaking of frames, we have a system called remote Overdub sync which instead of remote transport sync where you are to deal with latency on a project. If someone is singing or doing ADR, going back to ISDN, the original method is to send timecode into sync. Two timelines on either side. So one chases the other networks, but there's a lot of setup on either side. So the remote overdub sync ideas that you can send to the talent whatever they need to hear and whatever they need to see and they perform if it's ADR and they sing and that performance gets back to you and you record it. And while you're recording it using the remote over dub sync system, you hear it in sync and when you hit stop in your daw, you see the waveform and then a moment later, a couple of seconds later, you see that waveform jump back in time to be where it should have been had there been no latency between you. So you can overdub, really just connect and overdub. You don't have to tell people to load up this timeline and click this button to synchronize. : No more comments of that doesn't look right to me from the back of the room. When you're recording with the talent, are. : You thinking or is it going to happen for iOS by any chance? : Oh yeah. : Yes. : I'm a big icad fan. I really love mine. I use it mostly as a music score player to play piano and I would love to use source connect on it and it's definitely happening. : AP is only asking you because he's trying to create the world's smallest voiceover roadkit. It's a purely selfish motivation. : I get it. : He just needs to use a trrs cable. And like, if Andrew just needs to talk to me about how to make things. : Uh huh. Absolutely. You would have the world's smallest road case. Indeed. : That's not the only thing that I've got the smallest of, but that's another story for another day. Thank you guys. Thank you Rebecca. Thank you Ross. Thank you Vincent. And of course Robert. : Congratulations. Congrats. : Thank you. : Thanks Andrew. Thanks, Jorge. : Well, that was fun. : Is it over? : The pro audio suite with thanks to Tribu and austrian audio recorded using Source Connect, edited by Andrew Peters and mixed by Voodoo Radio Imaging from George the tech Wittem. Don't forget to subscribe to the show and join in the conversation on our Facebook group. To leave a comment, suggest a topic, or just say g'day. Drop us a note at our website, thepro audiosuite.com. #ProAudioSuite #SourceConnectFour #RemoteRecording #AudioProduction #Podcasting #AudioEngineering #Podcasters #VoiceOver #PodcastProduction #AudioTech