Podcasts about target top

Nottingham Forest have been linked with a move for top German prospect Eric da Silva Moreira, an Under-17 World Cup winner who plays for St Pauli. We discuss that and former Forest boss Steve Cooper's potential move to Leicester City as Matt Davies is joined by Reds fan Paul Lindsay. #nffc Paul is our guest today to primarily discuss his recently completed walk from Land's End to John O'Groats to raise funds for the Alzheimer's Society in honour of his father. Paul has raised £19,000 and is hoping to push beyond £20,000. To donate go to: https://www.justgiving.com/page/paul-lindsay-1687958671599 Do like and subscribe to our channel. You can also become a member here: https://www.youtube.com/channel/UCi8cKKOXuEiopR3A11TDtgQ/join We're grateful for the support of our main sponsors, the Trent Navigation Inn. For more on their menu, events and to book a table go to: https://www.trentnavigation.com/ Thank you to today's second sponsors, Home Move Estate Agents. For more information go to: https://www.homemoveea.co.uk/ben-sales/ To vote for us in the Football Content Awards (best Premier League podcast) go to: https://footballcontentawards.com/2024/05/17/nominations-open/ Learn more about your ad choices. Visit podcastchoices.com/adchoices

Police in Haiti are reported to have launched an operation to arrest the leader of the coalition of gangs which now control most of the capital. Jimmy ‘Barbecue' Chérizier is seen as the main instigator of the protests which forced the Prime Minister, Ariel Henry, to resign last week. We hear from a former US diplomat to Haiti.Also in the programme: People in Russia are casting their ballots on the second day of a vote; and Mad Women- a new play about three women artists, living with bipolar disorder.(File Photo: Former police officer Jimmy ‘Barbecue' Chérizier and leader of an alliance of armed groups, speaks to a news outlet on a mobile phone during a news conference, in Port-au-Prince, Haiti, March 11, 2024. Reuters/Ralph Tedy Erol/File Photo)

The Tennessee Titans are one of the teams reported to be interested in Kansas City Chiefs cornerback L'Jarius Sneed and to get him it will likely cost more than the Titans can pay, but Tyler breaks out a few trade packages that could make some sense for the Titans, even if they likely wouldn't be accepted. Next, the Titans have a major need on the interior of the offensive line and a player like Connor Williams or Andre James in free agency could fit the bill. Finally, the Titans need to avoid paying big-time guard contracts to players like Robert Hunt or Kevin Dotson. Follow Tyler on Twitter @TicTacTitans Follow the show on Facebook @LockedOnTitansPod Subscribe to the Locked On Titans YouTube channel:https://www.youtube.com/c/LockedOnTitans/videos Subscribe to the TicTacTitans Film Channel:https://www.youtube.com/@TicTacTitans Support Us By Supporting Our Sponsors!eBay MotorsFor parts that fit, head to eBay Motors and look for the green check. Stay in the game with eBay Guaranteed Fit at eBayMotos.com. Let's ride. eBay Guaranteed Fit only available to US customers. Eligible items only. Exclusions apply. NissanOur friends at Nissan have a lineup of SUV's with the capabilities to take your adventure to the next level. Take the Nissan Rogue, Nissan Pathfinder, or Nissan Armada and go find your next big adventure. Shop NissanUSA.com. RobinhoodRobinhood has the only IRA that gives you a 3% boost on every dollar you contribute when you subscribe to Robinhood Gold. Now through April 30th, Robinhood is even boosting every single dollar you transfer in from other retirement accounts with a 3% match. Available to U.S. customers in good standing. Robinhood Financial LLC (member SIPC), is a registered broker dealer. BetterHelpThis episode is sponsored by BetterHelp. Make your brain your friend, with BetterHelp. Visit BetterHelp.com/LOCKEDON today to get 10% off your first month. GametimeDownload the Gametime app, create an account, and use code LOCKEDON for $20 off your first purchase.FanDuelGet buckets with your first bet on FanDuel, America's Number One Sportsbook. Right now, NEW customers get ONE HUNDRED AND FIFTY DOLLARS in BONUS BETS with any winning FIVE DOLLAR BET! That's A HUNDRED AND FIFTY BUCKS – if your bet wins! Visit FanDuel.com/LOCKEDON to get started. FANDUEL DISCLAIMER: 21+ in select states. First online real money wager only. Bonus issued as nonwithdrawable free bets that expires in 14 days. Restrictions apply. See terms at sportsbook.fanduel.com. Gambling Problem? Call 1-800-GAMBLER or visit FanDuel.com/RG (CO, IA, MD, MI, NJ, PA, IL, VA, WV), 1-800-NEXT-STEP or text NEXTSTEP to 53342 (AZ), 1-888-789-7777 or visit ccpg.org/chat (CT), 1-800-9-WITH-IT (IN), 1-800-522-4700 (WY, KS) or visit ksgamblinghelp.com (KS), 1-877-770-STOP (LA), 1-877-8-HOPENY or text HOPENY (467369) (NY), TN REDLINE 1-800-889-9789 (TN)

Phil Goodlad is joined by Stephen Craigan and Press Association sports reporter Anthony Brown to talk about all the big news in Scottish football and look ahead to Rangers' clash with Ross County and Aberdeen v Motherwell. They also ask what band Brendan Rodgers is most like and, as it's Valentine's Day, discuss what they love most about Scottish football.

In the latest episode of our Yorkshire Post FootballTalk podcast, Stuart Rayner and Leon Wobschall discuss whether Leeds United edging towards Premier League safety, the battle between Sheffield United and Middlesbrough for Championship runners-up spot and whether Rotherham United are in freefall. They also discuss how realistic a chance Neil Warnock has of pulling off a 'great escape' with Huddersfield Town and whether Sheffield Wednesday AND Barnsley can both finish in the top two in League One. 

Should Sean Payton and George Paton look to invest a lot on the defensive side of the football for the Denver Broncos in free agency? If so, should they be looking at top pass rushers, such as Javon Hargrave, Frank Clark and Yannick Ngakoue? Or should their focus be on giving Vance Joseph ILB playmakers such as Deion Jones, or Lavonte David? Or do they focus on keeping an elite secondary and adding James Bradyberry or Jonathan Jones to pair with Pat Surtain? On the DNVR Broncos Podcast, Zac Stevens, Ryan Koenigsberg and Henry Chisholm are coming to you LIVE from the DNVR Bar to break down all of the latest news in Broncos Country. BUY TICKETS HERE: https://gametime.hnyj8s.net/c/3442941/1441541/10874 TAILGATE WITH US: https://bit.ly/3fwCPha  Breck Brew Ultimate Gameday Experience: https://thednvr.com/brecksweeps/ Find the nearest Broncos Country Pale Ale near you at https://www.breckbrew.com/brew-finder/  Visit jivehyve.com and get your order delivered today! Roman: Go to https://ro.co/DNVR today to get 20% off your entire first order.  Visit https://dkng.co/DNVR to sign up for DraftKings Sportsbook using the code “DNVR” Gambling Problem? Call 877-8-HOPENY/text HOPENY (467369) (NY), If you or someone you know has a gambling problem, crisis counseling and referral services can be accessed by calling 1-800-GAMBLER (1-800-426-2537) (CO/IL/IN/LA/MD/MI/NJ/OH/PA/TN/WV/WY), 1-800-NEXT STEP (AZ), 1-800-522-4700 (KS/NH), 888-789-7777/visit ccpg.org (CT), 1-800-BETS OFF (IA), visit OPGR.org (OR), or 1-888-532-3500 (VA). 21+ (18+ NH/WY). Physically present in AZ/CO/CT/IL/IN/IA/KS/LA(select parishes)/MD/MI /NJ/ NY/OH/PA/TN/VA/WV/WY only. VOID IN ONT. Eligibility restrictions apply. BONUS bets: Valid 1 per new customer. Min. $5 deposit. Min $5 bet. $200 issued as bonus bets that expire 7 days (168 hours) after being awarded. See terms at sportsbook.draftkings.com/basketballlterms. No Sweat: Valid 1 per customer. NBA same game parlay bets only. Min 3-leg. First bet after opting-in must lose. Paid as one Bonus Bet Token based on amount of initial losing bet. Max. wagering limits apply. Bonus Bets expire 7 days (168 hours) after being awarded. Ends at the start of the final NBA game each day when offered prior to 2/16/23 @ 10PM ET. See terms at sportsbook.draftkings.com/basketballterms.When you shop through links in the description, we may earn affiliate commissions. Copyright Disclaimer under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Learn more about your ad choices. Visit megaphone.fm/adchoices

Max

Boris Johnson suffered the toughest day of his premiership on Wednesday when he faced calls to quit after he admitted attending a Number 10 “bring your own booze” party during lockdown, the commodities boom has extended to nickel which reached its highest level in a decade, environmentalist activists are targeting public relations firms, and Beyond Meat has become one of the most shorted companies on US stock market. Subscribe to the FT News Briefing on Apple Podcasts or SpotifyMentioned in this podcast:Nickel hits 10-year high as electric vehicle production ramps upActivists target public relations groups for greenwashing fossil fuelsShort sellers pile into Beyond MeatBoris Johnson faces calls to resign after ‘bring your own booze' eventThe FT News Briefing is produced by Fiona Symon and Marc Filippino. The show's editor is Jess Smith. Additional help by Peter Barber and Gavin Kallmann. The show's theme song is by Metaphor Music. Topher Forhecz is the FT's executive producer. The FT's global head of audio is Cheryl Brumley.Read a transcript of this episode on FT.com See acast.com/privacy for privacy and opt-out information.

In this episode, Boone discusses teams with favorable schedules in the next month, recaps all the notable injuries, and goes over the top players available on the waiver wire. Offenses to target based on their upcoming schedules (1:55) Injury roundup - Austin Ekeler, Nick Chubb, Mike Evans, O.J. Howard, Josh Allen, Cam Newton, etc. (5:50) Week 5 waiver wire adds (11:45)

A special episode of the Premier League Nightclub sees the boys go a little wider in their discussion of all things sports. Of course the lads talk all things Leicester, Spurs, West Ham and a dismal Manchester United. Plus they dissect the big clash between Chelsea and Liverpool.However, the first ever special guest makes their way onto the Podcast, Fox Footy Journalist Tom Morris. He talks about his relationship with the world game, how he sees the media overseas and in Australia and what his role requires in the specific sports he covers.

Adam Ronis and guest Steve Renner of Scout DFS shared their thoughts on the final week of the NFL. They also shared their thoughts on teams that are still playing in the championship and named players they should include on their team. They also discussed the NFL matchups and shared their thoughts on teams that may make the playoffs if they win. Lastly, they discussed players to target and draft in the early rounds in 2019. #fntsy #fntsysportsnetwork #scoutfantasysports #scoutdfs #finalweekofnfl #playerstotarget #nflplayoffs Learn more about your ad-choices at https://news.iheart.com/podcast-advertisers

Adam Ronis and guest Steve Renner of Scout DFS shared their thoughts on the final week of the NFL. They also shared their thoughts on teams that are still playing in the championship and named players they should include on their team. They also discussed the NFL matchups and shared their thoughts on teams that may make the playoffs if they win. Lastly, they discussed players to target and draft in the early rounds in 2019.#fntsy #fntsysportsnetwork #scoutfantasysports #scoutdfs #finalweekofnfl #playerstotarget #nflplayoffs

Activists Target Top Patreon Accounts, Proving Hypocrisy. A few top podcasts have histories of breaking Patreon's rules and some activists have begun to highlight these channels. One thread on reddit was recently removed as it provided proof of a top Patreon podcast overtly breaking the rules. This has created an interesting problem as people in favor of free speech won't resort to the same tactics employed by those seeking to deplatform people.Patreon has made itself a battlefield in the culture war by entering the fight but the left and social justice activists have no sympathy for Patreon. Some on the left have already been highlighting podcasts that break the rules.The Number 5 largest account has recently joined in to support Dave Rubin, Jordan Peterson, over the banning of Sargon of Akkad, aka Carl Benjamin. Could this start a cascade that ends with Patreon facing its end?Support the show (http://timcast.com/donate)

You would think Honda might learn from talking up expectations too soon into a new partnership, but they have quickly revealed their goals with the Toro Rosso team just one day after the deal was announced. The power unit supplier want to push Toro Rosso to at least third in the championship next season, despite finishing no higher than sixth with McLaren, and Toro Rosso finishing no higher than sixth... ever.

  Click here to support the show on Patreon! Show notes can be found here: http://tparkatheist.blogspot.com/2016/07/episode-108-rogering-that-ailes-you.html This wraps up the news episode I recorded with X from the Utah Outcasts podcast.  There's a segment from America, and X and I cover TN Republicans like Trump, Bob Corker takes himself out of the VP race, and more.

It's Safety Week 2010 and it only makes sense for this week's "Try It Tuesday" to be a safety device. A while ago we had a chance to give-away a Micro-Jig GRR-Ripper as part of our monthly schwag drawing. I couldn't just give one away without trying it out for myself, so for total openness...YES I did get one to tryout and talk about on the show. That was several months ago, and in that time I've had a chance to run the GRR-Ripper through it's paces. What are the final results and my thoughts? I LOVE IT! Why do I love it? One very specific reason...I feel safe and in control of my stock while using it. How many times can you say that about a tool that can be the difference between injury and a great day in the shop? To find out more about the GRR-Ripper, visit www.microjig.com. There's quite a few options and accessories for the GRR-Ripper, check them all out for sale at Highland Woodworking.

Every year I try to help my wife's business by making wedding boxes for her clients. They're simple and plain and are made to hold a few pictures and maybe a CD or other archive of the images from their happy occasion. This year we changed things up a bit, and went with a new design. One that's easier for me to build and batch out, often using not much more than some smaller scraps and off-cuts that normally might be thrown out or burned in a campfire. The joinery for this easy to build box is also quite simple. Grooves, rabbets and a miter are all there is to it, all joinery that can be accomplished on a table saw alone or with a variety of tools if you prefer. Simple and understated, this box can be built completely for utilitarian purposes or dressed up for something more elegant. Enjoy! Tools featured in today's video include: Bessey Web Clamp Kreg Bandsaw Fence Whiteside Router Bit Steel City Tool Works 14" Band Saw Bench Dog ProMax RT Bench Dog Feather-Loc Double Featherboard Milescraft Push Stick SawStop Cabinet Saw Help support the show - please visit our advertisers

In part 1 of the Teak shoe rack build I milled this amazing Teak stock my friend Jim sent. In today's episode it's time to wrap up the milling process by taking the components over to the router table and profiling the edges on all the pieces followed by prepping them for the mechanical fasteners. The final result is an amazing project that my family will put their shoes all over, soaking wet and nasty. But since it's made from Teak I'm not worried about it all. Tools featured in today's show: Fisch Drillbit/Countersink Set Bench Dog 40-300 ProMax RT Complete SawStop Cabinet Table Saw Steel City Tool Works 14-Inch Band Saw Wood Slicer Resaw Bandsaw Blade Bora Pistol Grip Clamps Micro Jig ZeroPlay Guide Bar System Download Video Help support the show - please visit our advertisers

Thanks to a generous donation of some amazingly beautiful Teak boards from a friend of the show, I have an opportunity to work with an species of wood I probably would ordinarily not use. It's not that I don't want to use different species, I just have a few that I'm readily familiar with and just haven't had a reason to step out of my comfort zone before. So the first thing I'm building with these gorgeous boards is a...shoe rack! Tools featured in today's show: JET Benchtop Oscillating Spindle Sander with Spindle Assortment, 110-Volt 1 Phase SawStop Cabinet Table Saw Steel City Tool Works 14-Inch Band Saw Wood Slicer Resaw Bandsaw Blade Bora Pistol Grip Clamps Micro Jig ZeroPlay Guide Bar System [haiku url="https://archive.org/download/506TeakShoeRackPt1/506%20Teak%20Shoe%20Rack%20Pt%201.mp3" title="MBW506"] Download Video Download HD 720 Video Download Audio Help support the show - please visit our advertisers

You've seen the pictures and some of you have even been asking how I did it? After all, jewelry might be an amazing way to win over the love and affection of your significant other. Or it could simply be a way to wow your friends who still think the only thing you can do in your shop is "claim to be building a piece of furniture" but they can't understand why it takes days, weeks or even months considering the guys on TV do it in 30 minutes or less. Back around Valentine's Day 2013 I posted a blog entry titled "Fastest way to her heart is with wooden jewelry?" and ever since then I've been down in the shop experimenting with scraps and even buying some exotic stock to try and make new pieces that EVEN I can't believe came from me. In today's episode I share with you some of the basics to wooden ring making I've discovered over the past few weeks. I'll demonstrate the first technique I tried and the one I'm having a lot of success with currently. It's so simple and you probably already have all the tools on hand. Tools mentioned in today's post include: Auriou #6 rasp Rikon 70-100 Mini Lathe Forstner bits Milwaukee 49-56-0051 1-1/8-Inch Super-Tough Bi-Metal Hole Saw IRWIN 226340 4-Inch Drill Press Vise ***UPDATE*** Since recording this video I've been experimenting with a couple more options, which appear to be easier and more successful, for creating these beautiful rings. Keep a look out for follow-up posts and maybe even a follow-up video too? [haiku url="http://blip.tv/file/get/Mattvan-504WoodenRings353.mp3" title="MBW504"] Download Video Download HD 720 Video Download Audio Help support the show - please visit our advertisers

The last few episodes of the Bedside Table build have been all about milling of components for the project and playing around with joinery techniques. It's time to start the final assembly. The first step is attaching the dust frames and shelves to the sides. We have a lot of joinery options to get the job done, but in my opinion the one that's right for this particular project isn't a complicated one, it's dowels. Years ago I bought my first dowel jig and feel in love with the simplicity of the joint. Unfortunately I hated the dowel jig! So eventually I abandoned the technique for something else. Recently though I bought a better jig and have started to use dowels in more of my projects. The result is a happy woodworker! In the line up of joinery techniques dowels appear to get a little more respect than biscuits or pocket hole joinery but aren't on the same level as mortise and tenon or other "traditional" joinery. Seems a shame considering how strong the joint can be, not to mention their versatility in location. Tools used in this episode: Wide capacity economy dowel jig Bora Pistol Grip Clamps 24" Veritas Aluminum straight edge Veritas Dovetail Saw Wentzloff & Sons Carcass Saw Benchcrafted Moxon Vise Bessey Bar Clamps Kreg K4 Kit Kreg Micro Jig [haiku url="http://blip.tv/file/get/Mattvan-498BedsideTablesPt4873.mp3" title="MBW498"] Download Video Download HD 720 Video Download Audio Help support the show - please visit our advertisers

Following up on the last episode, where I revealed recent changes made to my shop to improve work flow and efficiency...at least in theory...,today's show is a closer look at some of the "accessories" and little shop helpers I've added all around it. We've all heard the cliche "it's the little things that matter". In this case, it really IS the little things that make all the difference...in how I feel about working at my various tools. As much as we want to justify buying all kinds of new fangled jigs and shop accessories the one issue we run into eventually is where to put them, and more importantly, how will we find them when we need them the most? Being organized shouldn't just refer to having a set of well thought out plans to build a project. Being organized should also refer to where and why things are laid out also. I don't know the statistics off hand but I think it's safe to say that many of the shop accidents that occur regularly each year, both big and small, probably have to do with someone not taking the extra time to use a safety accessory simply because it wasn't close at hand. Surprisingly, it doesn't cost a lot of money to get well organized, nor does it take a lot of time. The accessories I talk about in today's episode took me longer to figure out exactly where to place them than it did to purchase OR put them in their new homes. You don't have to go as far as building fancy cabinets or caddies (although that could be fun) when you decide "now I'm ready to be organized", being organized is a state of mind and a way of life. The payoff at the end of the day will make a huge difference in how we work in the shop. Of course the second half of being organized is remembering to put things back in their place...but that's for another episode! Featured items in today's show: Magswitch and accessories Bench Dog Feather-Loc Featherboard with Bar Bench Dog Push Bloc Push Stick Tormek Rotational Base Micro-Jig Grrripper Fast Mount Shelving System All of these are also available at Amazon.com too! Help support the show - please visit our advertisers

I can't remember the last time I did any kind of shop tour in my current basement workshop, so after much prodding by a few of you (especially you John!!!) I decided it was time to invite all of you down for a look around. Really there's not a lot to look at that you haven't already seen, but I figured while you're all here I might as well explain a little bit about where and what I have in the shop. Coincidentally timed with this tour (completely unplanned I swear!) is the introduction of a new piece of equipment in my shop. Thanks to the folks at Highland Woodworking and their sponsorship of the show we have a brand new Steel City 8" Jointer. So without further delay, let's get this tour moving along!

The last few episodes of the Bedside Table build have been all about milling of components for the project and playing around with joinery techniques. It's time to start the final assembly. The first step is attaching the dust frames and shelves to the sides. We have a lot of joinery options to get the job done, but in my opinion the one that's right for this particular project isn't a complicated one, it's dowels. Years ago I bought my first dowel jig and feel in love with the simplicity of the joint. Unfortunately I hated the dowel jig! So eventually I abandoned the technique for something else. Recently though I bought a better jig and have started to use dowels in more of my projects. The result is a happy woodworker! In the line up of joinery techniques dowels appear to get a little more respect than biscuits or pocket hole joinery but aren't on the same level as mortise and tenon or other "traditional" joinery. Seems a shame considering how strong the joint can be, not to mention their versatility in location. Tools used in this episode: Wide capacity economy dowel jig Bora Pistol Grip Clamps 24" Veritas Aluminum straight edge Veritas Dovetail Saw Wentzloff & Sons Carcass Saw Benchcrafted Moxon Vise Bessey Bar Clamps Kreg K4 Kit Kreg Micro Jig [haiku url="http://blip.tv/file/get/Mattvan-498BedsideTablesPt4873.mp3" title="MBW498"] Download Video Download HD 720 Video Download Audio Help support the show - please visit our advertisers

Today's "Try it Tuesday" is all about my shop apron, more specifically the Leather Apron from Highland Woodworking. With it's generous proportions, it's deep flap covered pockets and it's really comfortable feel (once it's properly broken in that is) this is a great apron for any woodworker. Why would you need a shop apron? With all the little things you have laying around your benchtop, or on top of your stationary tools it's great to have a place to put them where they can be reached quickly and easily. That's exactly what a good shop apron will do. Not to mention protecting you from flying debris and keeping you from being caked in sawdust. Regardless of whether it's leather, canvas, cotton or polyester? A good shop apron will pay for itself in no time, especially when you don't have to search for your pencil or square.

Following up on the last episode, where I revealed recent changes made to my shop to improve work flow and efficiency...at least in theory...,today's show is a closer look at some of the "accessories" and little shop helpers I've added all around it. We've all heard the cliche "it's the little things that matter". In this case, it really IS the little things that make all the difference...in how I feel about working at my various tools. As much as we want to justify buying all kinds of new fangled jigs and shop accessories the one issue we run into eventually is where to put them, and more importantly, how will we find them when we need them the most? Being organized shouldn't just refer to having a set of well thought out plans to build a project. Being organized should also refer to where and why things are laid out also. I don't know the statistics off hand but I think it's safe to say that many of the shop accidents that occur regularly each year, both big and small, probably have to do with someone not taking the extra time to use a safety accessory simply because it wasn't close at hand. Surprisingly, it doesn't cost a lot of money to get well organized, nor does it take a lot of time. The accessories I talk about in today's episode took me longer to figure out exactly where to place them than it did to purchase OR put them in their new homes. You don't have to go as far as building fancy cabinets or caddies (although that could be fun) when you decide "now I'm ready to be organized", being organized is a state of mind and a way of life. The payoff at the end of the day will make a huge difference in how we work in the shop. Of course the second half of being organized is remembering to put things back in their place...but that's for another episode! Featured items in today's show: Magswitch and accessories Bench Dog Feather-Loc Featherboard with Bar Bench Dog Push Bloc Push Stick Tormek Rotational Base Micro-Jig Grrripper Fast Mount Shelving System All of these are also available at Amazon.com too! Help support the show - please visit our advertisers

You've seen the pictures and some of you have even been asking how I did it? After all, jewelry might be an amazing way to win over the love and affection of your significant other. Or it could simply be a way to wow your friends who still think the only thing you can do in your shop is "claim to be building a piece of furniture" but they can't understand why it takes days, weeks or even months considering the guys on TV do it in 30 minutes or less. Back around Valentine's Day 2013 I posted a blog entry titled "Fastest way to her heart is with wooden jewelry?" and ever since then I've been down in the shop experimenting with scraps and even buying some exotic stock to try and make new pieces that EVEN I can't believe came from me. In today's episode I share with you some of the basics to wooden ring making I've discovered over the past few weeks. I'll demonstrate the first technique I tried and the one I'm having a lot of success with currently. It's so simple and you probably already have all the tools on hand. Tools mentioned in today's post include: Auriou #6 rasp Rikon 70-100 Mini Lathe Forstner bits Milwaukee 49-56-0051 1-1/8-Inch Super-Tough Bi-Metal Hole Saw IRWIN 226340 4-Inch Drill Press Vise ***UPDATE*** Since recording this video I've been experimenting with a couple more options, which appear to be easier and more successful, for creating these beautiful rings. Keep a look out for follow-up posts and maybe even a follow-up video too? [haiku url="http://blip.tv/file/get/Mattvan-504WoodenRings353.mp3" title="MBW504"] Download Video Download HD 720 Video Download Audio Help support the show - please visit our advertisers

Thanks to a generous donation of some amazingly beautiful Teak boards from a friend of the show, I have an opportunity to work with an species of wood I probably would ordinarily not use. It's not that I don't want to use different species, I just have a few that I'm readily familiar with and just haven't had a reason to step out of my comfort zone before. So the first thing I'm building with these gorgeous boards is a...shoe rack! Tools featured in today's show: JET Benchtop Oscillating Spindle Sander with Spindle Assortment, 110-Volt 1 Phase SawStop Cabinet Table Saw Steel City Tool Works 14-Inch Band Saw Wood Slicer Resaw Bandsaw Blade Bora Pistol Grip Clamps Micro Jig ZeroPlay Guide Bar System [haiku url="https://archive.org/download/506TeakShoeRackPt1/506%20Teak%20Shoe%20Rack%20Pt%201.mp3" title="MBW506"] Download Video Download HD 720 Video Download Audio Help support the show - please visit our advertisers

In part 1 of the Teak shoe rack build I milled this amazing Teak stock my friend Jim sent. In today's episode it's time to wrap up the milling process by taking the components over to the router table and profiling the edges on all the pieces followed by prepping them for the mechanical fasteners. The final result is an amazing project that my family will put their shoes all over, soaking wet and nasty. But since it's made from Teak I'm not worried about it all. Tools featured in today's show: Fisch Drillbit/Countersink Set Bench Dog 40-300 ProMax RT Complete SawStop Cabinet Table Saw Steel City Tool Works 14-Inch Band Saw Wood Slicer Resaw Bandsaw Blade Bora Pistol Grip Clamps Micro Jig ZeroPlay Guide Bar System Download HD 720 Video Help support the show - please visit our advertisers

Every year I try to help my wife's business by making wedding boxes for her clients. They're simple and plain and are made to hold a few pictures and maybe a CD or other archive of the images from their happy occasion. This year we changed things up a bit, and went with a new design. One that's easier for me to build and batch out, often using not much more than some smaller scraps and off-cuts that normally might be thrown out or burned in a campfire. The joinery for this easy to build box is also quite simple. Grooves, rabbets and a miter are all there is to it, all joinery that can be accomplished on a table saw alone or with a variety of tools if you prefer. Simple and understated, this box can be built completely for utilitarian purposes or dressed up for something more elegant. Enjoy! Tools featured in today's video include: Bessey Web Clamp Kreg Bandsaw Fence Whiteside Router Bit Steel City Tool Works 14" Band Saw Bench Dog ProMax RT Bench Dog Feather-Loc Double Featherboard Milescraft Push Stick SawStop Cabinet Saw Help support the show - please visit our advertisers

Now that I lured you in with that “misleading” title here’s what today’s episode is really all about, a side-by-side comparison of my old Rigid 13” thickness planer and the new-to-me Steel City Tool Works 13” thickness planer with helical-style cutter head. Actually that description is also a little misleading considering the only thing being compared are the cutter heads. The Rigid planer has a traditional 2 straight-blade cutter head while the SCTW has a helical-style cutter head, which features numerous smaller cutters laid out in a helical pattern. Really my goal today was to demonstrate (to myself and you of course) that there is a noticeable difference between these two styles of cutter heads. So to achieve this goal I grabbed some scrap highly figured curly-maple, ripped it in half and fed one through each machine. The result? I guess you’ll have to watch to find out. ***FOR THE SAKE OF COMPLETE TRANSPARENCY: I originally received the Steel City Tool Works 13” planer for a review segment in 2013. Then after working with the staff of SCTW for an event at their Head Quarters, I received the tool as partial payment for my time and assistance. But I can assure you, my opinions on the tool are completely my own and cannot be altered by the manufacturer*** Looking to purchase either of these machines? You can find them at the following retailers (please remember, purchases made through these links help support the show while getting you the tools and supplies you need for the projects in your own shop): Amazon.com - Steel City Tool Works 40200H 13-Inch Planer with Helical Cutterhead Highland Woodworking - Steel City thickness planer Help support the show - please visit our advertisers

Now that I lured you in with that “misleading” title here’s what today’s episode is really all about, a side-by-side comparison of my old Rigid 13” thickness planer and the new-to-me Steel City Tool Works 13” thickness planer with helical-style cutter head. Actually that description is also a little misleading considering the only thing being compared are the cutter heads. The Rigid planer has a traditional 2 straight-blade cutter head while the SCTW has a helical-style cutter head, which features numerous smaller cutters laid out in a helical pattern. Really my goal today was to demonstrate (to myself and you of course) that there is a noticeable difference between these two styles of cutter heads. So to achieve this goal I grabbed some scrap highly figured curly-maple, ripped it in half and fed one through each machine. The result? I guess you’ll have to watch to find out. ***FOR THE SAKE OF COMPLETE TRANSPARENCY: I originally received the Steel City Tool Works 13” planer for a review segment in 2013. Then after working with the staff of SCTW for an event at their Head Quarters, I received the tool as partial payment for my time and assistance. But I can assure you, my opinions on the tool are completely my own and cannot be altered by the manufacturer*** Looking to purchase either of these machines? You can find them at the following retailers (please remember, purchases made through these links help support the show while getting you the tools and supplies you need for the projects in your own shop): Amazon.com - Steel City Tool Works 40200H 13-Inch Planer with Helical Cutterhead Highland Woodworking - Steel City thickness planer Help support the show - please visit our advertisers

Every year I try to help my wife's business by making wedding boxes for her clients. They're simple and plain and are made to hold a few pictures and maybe a CD or other archive of the images from their happy occasion. This year we changed things up a bit, and went with a new design. One that's easier for me to build and batch out, often using not much more than some smaller scraps and off-cuts that normally might be thrown out or burned in a campfire. The joinery for this easy to build box is also quite simple. Grooves, rabbets and a miter are all there is to it, all joinery that can be accomplished on a table saw alone or with a variety of tools if you prefer. Simple and understated, this box can be built completely for utilitarian purposes or dressed up for something more elegant. Enjoy! Tools featured in today's video include: Bessey Web Clamp Kreg Bandsaw Fence Whiteside Router Bit Steel City Tool Works 14" Band Saw Bench Dog ProMax RT Bench Dog Feather-Loc Double Featherboard Milescraft Push Stick SawStop Cabinet Saw Help support the show - please visit our advertisers

Thanks to a generous donation of some amazingly beautiful Teak boards from a friend of the show, I have an opportunity to work with an species of wood I probably would ordinarily not use. It's not that I don't want to use different species, I just have a few that I'm readily familiar with and just haven't had a reason to step out of my comfort zone before. So the first thing I'm building with these gorgeous boards is a...shoe rack! Tools featured in today's show: JET Benchtop Oscillating Spindle Sander with Spindle Assortment, 110-Volt 1 Phase SawStop Cabinet Table Saw Steel City Tool Works 14-Inch Band Saw Wood Slicer Resaw Bandsaw Blade Bora Pistol Grip Clamps Micro Jig ZeroPlay Guide Bar System [haiku url="https://archive.org/download/506TeakShoeRackPt1/506%20Teak%20Shoe%20Rack%20Pt%201.mp3" title="MBW506"] Download Video Download HD 720 Video Download Audio Help support the show - please visit our advertisers

In part 1 of the Teak shoe rack build I milled this amazing Teak stock my friend Jim sent. In today's episode it's time to wrap up the milling process by taking the components over to the router table and profiling the edges on all the pieces followed by prepping them for the mechanical fasteners. The final result is an amazing project that my family will put their shoes all over, soaking wet and nasty. But since it's made from Teak I'm not worried about it all. Tools featured in today's show: Fisch Drillbit/Countersink Set Bench Dog 40-300 ProMax RT Complete SawStop Cabinet Table Saw Steel City Tool Works 14-Inch Band Saw Wood Slicer Resaw Bandsaw Blade Bora Pistol Grip Clamps Micro Jig ZeroPlay Guide Bar System Download Audio Help support the show - please visit our advertisers

You've seen the pictures and some of you have even been asking how I did it? After all, jewelry might be an amazing way to win over the love and affection of your significant other. Or it could simply be a way to wow your friends who still think the only thing you can do in your shop is "claim to be building a piece of furniture" but they can't understand why it takes days, weeks or even months considering the guys on TV do it in 30 minutes or less. Back around Valentine's Day 2013 I posted a blog entry titled "Fastest way to her heart is with wooden jewelry?" and ever since then I've been down in the shop experimenting with scraps and even buying some exotic stock to try and make new pieces that EVEN I can't believe came from me. In today's episode I share with you some of the basics to wooden ring making I've discovered over the past few weeks. I'll demonstrate the first technique I tried and the one I'm having a lot of success with currently. It's so simple and you probably already have all the tools on hand. Tools mentioned in today's post include: Auriou #6 rasp Rikon 70-100 Mini Lathe Forstner bits Milwaukee 49-56-0051 1-1/8-Inch Super-Tough Bi-Metal Hole Saw IRWIN 226340 4-Inch Drill Press Vise ***UPDATE*** Since recording this video I've been experimenting with a couple more options, which appear to be easier and more successful, for creating these beautiful rings. Keep a look out for follow-up posts and maybe even a follow-up video too? [haiku url="http://blip.tv/file/get/Mattvan-504WoodenRings353.mp3" title="MBW504"] Download Video Download HD 720 Video Download Audio Help support the show - please visit our advertisers

The last few episodes of the Bedside Table build have been all about milling of components for the project and playing around with joinery techniques. It's time to start the final assembly. The first step is attaching the dust frames and shelves to the sides. We have a lot of joinery options to get the job done, but in my opinion the one that's right for this particular project isn't a complicated one, it's dowels. Years ago I bought my first dowel jig and feel in love with the simplicity of the joint. Unfortunately I hated the dowel jig! So eventually I abandoned the technique for something else. Recently though I bought a better jig and have started to use dowels in more of my projects. The result is a happy woodworker! In the line up of joinery techniques dowels appear to get a little more respect than biscuits or pocket hole joinery but aren't on the same level as mortise and tenon or other "traditional" joinery. Seems a shame considering how strong the joint can be, not to mention their versatility in location. Tools used in this episode: Wide capacity economy dowel jig Bora Pistol Grip Clamps 24" Veritas Aluminum straight edge Veritas Dovetail Saw Wentzloff & Sons Carcass Saw Benchcrafted Moxon Vise Bessey Bar Clamps Kreg K4 Kit Kreg Micro Jig [haiku url="http://blip.tv/file/get/Mattvan-498BedsideTablesPt4873.mp3" title="MBW498"] Download Video Download HD 720 Video Download Audio Help support the show - please visit our advertisers