Ask Paul | National Electrical Code

In this episode, Paul was asked a question about where to find the 2 foot – 4 foot and 5 foot – 12-foot rules for receptacle spacing in the NEC, and why they do not see the 4 foot, or 12 feet mentioned. We also answer a question on do standalone sprinkler systems have to have a dedicated circuit and all the labeling requirements of a fire alarm system per NEC 760.41(B). Well, we have the answer for you on this episode so enjoy.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Welcome to The Bond and Ground Podcast—On this episode Paul Abernathy discusses the misunderstanding of how to connect equipment grounding conductors, also known as EGC's in a box when you have multiple sizes and what happens when you have a metal box interposed in a PVC raceway system and visa versa for PVC boxes in metal raceway systems. On this podcast the National Electrical Code® becomes personal, practical, and powerfully clear. Hosted by Paul Abernathy, a respected voice on Code Making Panel 5 (CMP-5) and industry-leading expert on grounding and bonding, this show delivers deep insights into Article 250 and beyond. Each episode breaks down real-world applications of grounding and bonding rules, dispels myths, and explores the Code's intent—so you're not just following the rules, you're understanding them. Whether you're a licensed electrician, inspector, engineer, or serious Code student, The Bond and Ground Podcast equips you with the grounded knowledge you need to wire with confidence and stay compliant.

In this episode, Paul was asked a question about wide spread confusion over the last sentence in 680.26(B)(6)(a) regarding the use of a double insulated water pump motor for pool applications in Article 680 Part II. What do you do with that 8 AWG CU Solid Bonding Jumper when you take it to the pool pump motor and find out it is a special double insulated system motor. Well, we have the answer for you on this episode so enjoy.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Master The NEC Podcast | Episode 24 | Failure to Achieve Mental Blocks |  In this episode, Paul talks very candid about the issue of failure and the concept of Failure to Achieve that so many up and coming electrical professionals struggle with. You have heard the old saying "Failure is part of success" but thats fine until the failure begins to eat you up inside. Listen as Paul talks about your success.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul was asked a question about torquing and his thoughts on torque values and the changes from calibrated torque tools to now approved method. Paul also answers a question about SER being stripped out for use in raceways.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul was asked a question about tariffs and my thoughts on them and how it will help America become the greatest nation in the world. AGAIN.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul was asked a question about the location allowance of panels in locations such as stairwell areas and about the loads for a service or feeder with regards to EVSE. In fact, this episode may help clear up some confusion on some basic load calculations for those EV Lovers.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul will announce some new Virginia CE Code Update Seminars coming to Virginia starting in the summer of 2025. These seminars will be “ACTION” packed with NEC Code and Real Works Situations that only Paul can deliver. These will be a MUST ATTEND event that will be located at convenient locations on the east and west of Central Virginia. These events will be a MUST attend and updates will be posted at https://fasttraxsystem.com/events in the coming months.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul will talk about voltage drop and the requirements of VD as provided by Articles 647 and 695. However, what about the mandates in the International Energy Conservation Codes (IECC) C405.10 where it mandates an overall 5%.Well, in this episode we talk about it and break it down. Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul was asked to comment on an installation that inspectors are forcing the installation of a green bonding conductor between the meter enclosure and the service equipment. Since a neutral is already connected at each end of this installer, as permitted in 250.142 and as required by 250.24, the question being raised is about the parallel paths for return current and the pesky objectionable current argument.Well, on this episode I dig into both and give my opinion. Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul was asked to comment on how Artificial Intelligence will be integrated to the contractors and tradesman in the field. In this episode, we dig into why AI Technology is going to make your job easier in the field. Why, because those time sensitive questions are answered in a fast and reliable way. The TRADES are going to fall in love with TradeHog.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Get Trade Hog™ at https://tradehog.netBecome a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul was asked to comment on a listener's situation where they want to go into business for themselves but are not sure they are ready. Listen as Paul gives them guidance on being your own boss and how to look forward rather than behind. This episode will inspire you to succeed.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul was asked to comment on a listener's situation where they want to go into business for themselves but are not sure they are ready. Listen as Paul gives them guidance on being your own boss and how to look forward rather than behind. This episode will inspire you to succeed.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul will talk about dealing with customers who are disgruntled or simply problematic. We show you how to turn it around and earn a good future customer by breaking down how to use the Soft Skills to win over the customers. This is a MUST podcast episode for anyone who works with customers in the field.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul will talk about the various methods to grassroots marketing to help grow your business and the things to think about in terms of marketing in 2025. In this episode, we deep dive into marketing tips and tricks to success.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul is asked to explain why the sizing rules for the common grounding electrode conductor per 250.64(D)(1) and how it applies when 250.66 is on the table. For example, sizing the common GEC when the grounding electrodes are ground rods. Well, in this episode you get the facts.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul will talk about Metal-Clad Cable and Bundling of Multiconductor Cables as they apply to the adjustment factors in 310.15(C)(1).Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul is asked to explain why he blocks comments on his social media channels and why does he filter comments on those platforms, such as Tik Tok, Instagram, and Facebook? Also do the stupid comments get paul mad? Well, on this episode you get the facts. Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul will talk about the misinformation that circles around securely fastening EMT within 3 feet. It seems that folks still do not get the commonsense approach to the NEC on this and want to live in a dream world. Well, let's break it down in today's episode.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul is asked to explain the interpretation of Dry, Damp, and Wet Locations and how to tell which is which. Now, clearly this can have different interpretations based on regional conditions of use and some inspectors may view things differently depending on historical data from their location they are charged with ensuring safe construction. In many cases the NEC is ambiguous on purpose so that each locality can interpret a code reference more germane to their area and just something being black and white. Does this mean arguments can happen on the interpretation, oh most certainly that can happen. So, in this episode we talk about these definitions, and I will give you, my thoughts.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul is asked to explain the intent of 210.11(C)(2) Laundry Circuit and 210.52(F) Receptacle Outlets for dedicated areas for Laundry Equipment. So, what about the other receptacle outlets in the room or area or does it matter? Let's Go Pablo….Explain That CODE!If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul is asked about a situation where the electrician has stubbed out NM Cable for a luminaire at a apartment complex and the electrician did not install a junction box. So, what does the NEC say on this and in this episode, Paul will dig deep into what the NEC actually says. Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul is asked about bonding the metal water piping system and do you need to bond both the cold and hot water in a water piping system. We also clear up what is not considered a system and thus not required to meet 250.104(A).If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul will talk about a discussion online pertaining to the required length of free conductor at each box as specified in 300.14 of the 2023 National Electrical Code. This is an interesting discussion and a worth wild discussion because it is a case of common sense versus what the letter of the NEC is as written. In Fact, in this episode Paul will give you his opinion and the option of NFPA, or at the least someone who supplied their opinion from NFPA. So, I hope you enjoy this episode with your morning coffee and thank you all for your continued support.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.PS: You can post your own questions to us at PaulAbernathy.com - It's FREE!Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul is asked about putting  an EVSE on a shared circuit with a Dryer and still be compliant with 625.40 of the 2023 National Electrical Code. Also Paul answers a question about where you can use SE Cable in apartment complexes.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul is asked if adding a service disconnect, included with a transfer switch, and changing a 3 wire set of service conductors to now a 4 wire feeder to the existing inside panel which is now a remote distribution panel (Sub-Panel) considered a service upgrade or change?If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Is GFCI Required for EVSE in Garages, Outdoors, or Anywhere. Let's rant about it on today's mobile podcastBecome a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Calculating the existing service is critical to adding new loads. Taking amp meter readings is only a snap shot in time. Now, following 220.87 is an option and other than an actual load calculation is the only option. So, you need demand data for 1 year. Now, their is an exception for 30 day, 15 minute peak data to be used. So, you take the max demand load provided and multiply it by 125% plus the new loads and it is not to exceed the existing service or feeder rating. In Lexi's case it did so it means that 220.87 was ONLY to be used to determine if the existing service can be used.... Since it can't a NEW load calculation on the entire building is required and you DO NOT use the values given by the utility.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com. In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about all the comments on Facebook for a post about HVAC Protection and circuit conductors sizing. The original poster got 100% correct but the following commentors just made me cringe. The fact that some people will openly post comments that are so wrong simply amazes me. In fact, here is link to the original post on facebook - https://www.facebook.com/share/p/8KW62wwtTuJRRuT5/?mibextid=oFDknk If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com. In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to handle electrical inspectors and other issues around electrical inspections.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is our Mastering the NEC Course for those not studying for an electrical exam. This is our basic course for anyone wanting advanced knowledge of the National Electrical Code. This course never expires and works great on your mobile device. The course goes into extreme detail about the NEC and is great for those who simply desire to continue learning the NEC for their career advancement. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Understanding the 240-Volt Split-Phase System: A Simple ExplanationElectricity can be a complex subject, but we can make it easier to understand with somesimple analogies and explanations. One common question is how a 240-volt split-phasesystem works. Let's break it down step by step, using a seesaw analogy to make itclear.The Basics of a Split-Phase SystemA split-phase system is often used in homes. It involves two hot wires and a neutralwire, delivering power to houses. Each hot wire carries 120 volts, and together, theyprovide 240 volts to certain appliances.1. Two Hot Wires (L1 and L2):Each wire carries 120 volts of electricity. These wires are 180° out of phase with each other.2. Neutral Wire:This wire is connected to the center of the transformer and serves as a return path for current.The Seesaw AnalogyTo simplify understanding, imagine a seesaw in a playground with two kids on eitherend. The seesaw moves up and down, with one kid going up while the other goes down.This seesaw represents the two 120-volt wires in a split-phase system.Center of the Seesaw (Center Tap)The center pivot of the seesaw is like the neutral point in a split-phase electrical system.It is grounded and divides the transformer's secondary winding into two equal halves.The Two Kids on the SeesawKid 1 (L1): Represents the first hot wire carrying 120 volts.Kid 2 (L2): Represents the second hot wire carrying 120 volts.How They MoveWhen Kid 1 goes up, Kid 2 goes down. This means they move in opposite directions.This movement is always opposite – when one kid is at the top (positive peak),the other is at the bottom (negative peak).Phase Difference and Voltage CalculationIn an AC system, the voltage changes over time following a wave pattern. When twowaves are 180° out of phase, it means that when one wave is at its maximum positivevalue, the other is at its maximum negative value, and vice versa.Visualizing the ConceptImagine the wave patterns for L1 and L2:L1: Starts at zero, goes up to +120 volts, back to zero, down to -120 volts, and returns to zero in one complete cycle.L2: Starts at zero, goes down to -120 volts (when L1 is at +120 volts), back to zero, up to +120 volts (when L1 is at -120 volts), and returns to zero.This means when L1 is at its highest positive voltage (+120 volts), L2 is at its lowestnegative voltage (-120 volts). This opposite behavior continues throughout the cycle,creating a 180° phase difference.Why This Matters1. Balanced Loads:This 180° phase difference helps balance the electrical load and reduce the current inthe neutral wire.2. Combined Voltage:The total voltage across a load connected between L1 and L2 is the sum of the twovoltages, resulting in 240 volts.Simplified SummaryTwo Kids on a Seesaw: Represent the two 120-volt wires.Up and Down Movement: Represents the alternating current going in opposite phases.Height Difference: Represents the voltage difference, which adds up to 240 volts.ConclusionBy understanding the seesaw analogy and the concept of a center-tap transformer, itbecomes clear why the two 120-volt lines are considered 180° out of phase in a split-phase system. This phase difference allows the system to provide a total of 240 volts tocertain appliances, ensuring efficient and balanced electrical power distribution inhomes.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the Certified Master Electrical Code Professional® program and the use of the CMECP® trademark. The CMECP® Program is the next level in electrical code education for Master Electricians who wish to rise above the crowd and soak with the eagles. There is no other certification on the planet for Master Electricians and our CMECP® Program is protected by the USPTO section 8 and 15 approvals. You can find out more about the CMECP® Program at CMECP.org If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about so many topics that it is just better to listen and enjoy. If you submitted a question to PaulAbernathy.com you might want to listen as I probably addressed your question. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about the lack of true understanding of Grounding and Bonding. While the concepts seem simple enough, it seems that every time I read a social media post that has something to do with grounding or bonding it is wrong and misleading. So, today's podcast is my opinion on the issues with understanding grounding and bonding.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the new website https://necwitness.com and the expert witness services being promoted to the legal industry. With over 38 years of experience in electrical, such as Master Electrician, Electrical Inspector, Electrical Engineer II, Code Expert and Field Rep for NEMA, and Director of Technical Services to Encore Wire, as well as being the founder and educator at Electrical Code Academy, Inc. We bring a wide array of experiences to the table. This episode explains some of the history.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about calculating the grounded (neutral) conductor on a service and for individual service disconnects as it applied to a grouped allowance in 230.40 Ex. 2. We also explain the use of FMC with service conductors and the need for a SSBJ and lastly tips on cheap exam prep study.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Service Bonding QuestionsBecome a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is when to use the nameplate or 5KW for dryer calculations depending on the standard or optional method of calculating the load for a service. We also tackle the issue of the 2-6 disconnect rule in 230.71 in the 2020 National Electrical Code for an inspector in California.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Will the GFCI or OCPD to the GFCI Function on a Ground Fault?Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Facebook has gone CRAZY!Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com. In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the relationship of direct and inverse proportion to voltage, current, resistance, and power when using Ohm Law and Power Formulas. Now, I am not the BEST at electrical theory so I will try and break it down into understandable analogies to help hammer the principles home. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Ground Rods and Parking Lot Light Poles...Say WhatBecome a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is the use of multiple EGC's or a single EGC for multiple branch circuits and Disconnect Ratings for Detached Structures or Buildings supplied by a feeder. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about how to calculate the service or feeder load calculations for a school using the optional method in 220.86 of the 2023 National Electrical Code.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to calculate the primary and secondary amperes for a single phase as we as three-phase transformers. We will also discuss loading a transformer and a basic calculation that how that takes place. As always podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to find the Horsepower in DC, and Single and Three Phase exam questions that are simply trying to find a horsepower value. As always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is how to perform ampere calculations when factors such as Horsepower, Kilowatts, Voltages, Power Factors, and so forth are given in terms of a question on an exam that simply wants to know the ampere values of a specific question. As always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about how to perform Series and Parallel Circuit calculations. In this episode, we will talk about how to find the amps, ohms (resistance), and voltage calculations in combination series and parallel circuits. As always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode. If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is to discuss how to perform Parallel Circuit calculations. In this episode, we will talk about how to find the amps, ohms (resistance), and voltage calculations in parallel circuits. Now as always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planeBecome a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, as he answers more questions from the Let's Ask Paul Portal over at www.PaulAbernathy.com.In this episode, Paul will tackle the questions submitted by a listener. The topic covered in this episode is about how to perform Series Circuit calculations. In this episode, we will talk about how to find the amps, ohms (resistance), and voltage calculations in series circuits. Now as always, podcasts can be hard to follow so make sure you listen first and then come back later with a pen and paper and work on some of the examples discussed in this episode.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.