Podcasts about Tradesman

Today is World Suicide Prevention Day, so I wanted to check in to see how you're doing. With construction workers being four times more likely to die by suicide than the national average, we want to let you know you're not alone and discuss how you could seek help for yourself or even help a friend. Here are some stats to start you off today. On The Tools, recently found that 73% of the country's 2.1 million construction workers have been affected by mental illness and in the last decade, over 7,000 have taken their own lives. We want you to know today you are not alone, we're here to help as are all your mates, not just on your site, but everyone listening to this up and down the country.We were joined by James Pacy who told us about his very powerful experience and Keith Lewis from Samaritan who told us about the services they provide and who helped us with some advice to help family and friends. Remember, if you ever need them Samaritans are available 24 hours a day 7 days a week on 116 123. Plus, there's the pub lunch quiz, and you'll hear the very best messages we received.You matter and are never alone. If you've been struggling, help is always available:Samaritans - https://www.samaritans.org/how-we-can-help/contact-samaritan/Fix Radio Foundation - https://fixradiofoundation.co.uk/Construction Industry Helpline - https://www.constructionindustryhelpline.com/Andy's Man Club - https://andysmanclub.co.uk/Catch Clive On Fix Radio Monday - Thursday 12 PM - 3 PM Across The UK On DAB Radio And Online At https://www.fixradio.co.uk/ 

As The Met Office confirms that summer 2025 was officially the hottest on record for the United Kingdom, we're talking about working in that heat! The World Health Organization and the World Meteorological Organization have reported recently that millions of workers are exposed to heat stress, which affects their health, and their performance. They've both called for governments, employers, and workers to co-operate to develop adaptation strategies! Closer to home, unions such as GMB and Unite are calling for a 27oC limit for manual work to protect workers. So today I'm asking, is a maximum working temperature a good thing? Or just more red tape that's going to stop you getting on with the job? We spoke to Gary Mcyintire AKA Roofing Banksy and Sean Kelly to hear how they think heat should be dealt with in our industry. Plus, there's the pub lunch quiz and you'll hear the very best messages that we received.Catch Clive On Fix Radio Monday - Thursday 12 PM - 3 PM Across The UK On DAB Radio And Online At https://www.fixradio.co.uk/ 

We're hearing about plenty of you struggling with increased van insurance costs and this is something we've covered a number of times on this show, so today I'm asking - would you have a Black Box installed to your van if it would mean cheaper insurance costs? If not, why not? And do you have any other tips for how to reduce your insurance costs as they seem to spiral every year! I was joined by Pointy Plumber & his Apprentice Grandad as well as insurance expert Gavin Hill from Adrian Flux to hear what they think we can expect from the future of construction education. Plus, there's also the pub lunch quiz, and you'll hear the very best messages we received.Catch Clive On Fix Radio Monday - Thursday 12 PM - 3 PM Across The UK On DAB Radio And Online At https://www.fixradio.co.uk/ 

Today it was a lighthearted Thursday, and we were discussing superstitions. With our industry being thousands of years old, over the years a lot of superstitions have built up around it! From burying a jar of honey in the deepest part of the foundation to the 5,000-year-old belief that walking under a ladder will give you bad luck, these superstitions are everywhere. So today I wanted to hear if you follow any superstitions or what the most ridiculous ones you've heard on site are!We heard great responses from across the country. Plus, our mates at Wickes helped us help out Doug The Handyman after his van and tools were stolen! And of course, there's also the pub lunch quiz for your chance to bag yourself 6 points.Catch Clive On Fix Radio Monday - Thursday 12 PM - 3 PM Across The UK On DAB Radio And Online At https://www.fixradio.co.uk/ 

Today we were talking about business jargon! I wanted to touch base to see if you really think business jargon is the best practice when communicating in the trades. Do you think it brings something to the table, or should the phrase “Drill Down” only be used in relation to the job!? We did a deep dive on the topic and spoke to Maria Coulter and Grant Gundelfinger to see whether it has a place in our industry or if we should phase it out. Plus, we looped in our listeners to see if the ducks were aligned, and there's the pub lunch quiz.Catch Clive On Fix Radio Monday - Thursday 12 PM - 3 PM Across The UK On DAB Radio And Online At https://www.fixradio.co.uk/ 

Today we were talking about Partnerships! According to the Federation of Small Businesses, across all industries, only 6% of small businesses were partnerships. But is there a reason for this, or is it Business's best-kept secret! We spoke to Danny Webb and John Argyl to hear the pros and cons of going into business with a mate. Plus, there's also the pub lunch quiz, and you'll hear the very best messages we received.Catch Clive On Fix Radio Monday - Thursday 12 PM - 3 PM Across The UK On DAB Radio And Online At https://www.fixradio.co.uk/ 

With the kids back at school this month, today I want to ask a very simple question - would you want your kids to study a construction course and then join the trade? If not, why not? I was joined by Peter Roberts and Dan Brown to hear what they think we can expect from the future of construction education. Plus, there's also the pub lunch quiz, and you'll hear the very best messages we received - Enjoy.Catch Clive On Fix Radio Monday - Thursday 12 PM - 3 PM Across The UK On DAB Radio And Online At https://www.fixradio.co.uk/ 

Today it was a lighthearted Thursday, and with Fix Fest, the only festival for the trades just a few days away, I wanted to know what your niche festival essentials are? From gaffer tape for emergency shoe repairs to questionable ways of avoiding the queues for the loo. We heard great responses from across the country. Plus, there's also the pub lunch quiz for your chance to bag yourself 6 points.Catch Clive On Fix Radio Monday - Thursday 12 PM - 3 PM Across The UK On DAB Radio And Online At https://www.fixradio.co.uk/ 

Today we were talking about networking. Though our industry relies on what you know, sometimes to get booked out, who you know is just as important! However, with 40% of professionals claiming to find networking difficult, I wanted to hear how you go about networking. We heard some fantastic advice from Lee Fuller and Bob Hay.Plus, as always, there's the Pub lunch Quiz and you will hear the very best messages we received!Catch Clive On Fix Radio Monday - Thursday 12 PM - 3 PM Across The UK On DAB Radio And Online At https://www.fixradio.co.uk/ 

Today it was a lighthearted Thursday where we like to have a laugh. So today, with the bank holiday approaching, we wanted to know: What are you doing this Bank Holiday? A family day out? Actually putting your feet up? Going to the gym? We heard great responses from across the country. Plus, there's also the pub lunch quiz for your chance to bag yourself 6 points.Catch Clive On Fix Radio Monday - Thursday 12 PM - 3 PM Across The UK On DAB Radio And Online At https://www.fixradio.co.uk/ 

Today we were discussing future home standards and what it could mean for your business. With it set to be introduced this year I wanted to know if it's going to push your costs up or change your way of working. We were joined by John Cruickshank and Tim Pollard to hear what it could mean for you?Catch Clive On Fix Radio Monday - Thursday 12 PM - 3 PM Across The UK On DAB Radio And Online At https://www.fixradio.co.uk/ 

Whether you like it or not, you are the salesperson in your business.And chances are, you're losing work not because of price but because you're saying or doing the wrong things during your sales process.When a customer says it's “too expensive,” that's usually a cover-up. The truth? You've missed something they were expecting, or rubbed them the wrong way.In this episode, I'll show you how to fix that and become the ultimate sales machine for your business, even if you hate selling.WHAT YOU WILL LEARN AND KEY ACTIONS FROM THIS EPISODE:1. Discover the most powerful questions that build trust and win more jobs.2. Mirror their body language to build instant connection and rapport fast.3. Position them by hand holding and explain the next steps clearly to reduce doubt.4. How to make follow-up calls and stop leaving money on the table. 5. Learn to close sales and handle common objections like price.Listen now to 3x your conversion rate, win more work and make more profit. Rise of The Trades Summit Tickets: ⁠⁠Grab your ticket here⁠⁠LeadZilla - Marketing and Sales Software: ⁠⁠Start your 14 day free trial now⁠⁠ServiceM8 - Job Management Software: ⁠⁠Start your extended 28 day free trial and bonuses ⁠⁠BECOME A MEMBER: Join our ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠Growth Club and get instant access⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠ to live marketing training, business coaching, courses and a thriving community of professional trades. Guaranteed to help you to achieve time and financial freedom. JOIN OUR FACEBOOK GROUP: Join our free and thriving ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠Facebook group and community ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠APPLY TO JOIN OUR INNER CIRCLE: Apply to join our 12-month ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠business and marketing coaching programme ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠WHO WE HELP AND SUPPORTAt the Trades Freedom Club, we help tradesmen and tradeswomen such as Plumbers, Heating Engineers, Electricians, Renewable Energy, Plasterers, Builders, Joiners, Roofers, Flooring, HVAC, Glazing, Scaffolders, CCTV, Security companies and Sub Contractors to build, grow and scale their trades or construction businesses.

Today we were discussing Rude Customers! From treating you like a second-class citizen to acting like your hard-earned skills are easy, dealing with them is part of the job. We heard stories from Alex Burman and Myles Dylan about their experiences. Plus there's also the pub lunch quiz and you'll hear the very best messages we received!Catch Clive On Fix Radio Monday - Thursday 12 PM - 3 PM Across The UK On DAB Radio And Online At https://www.fixradio.co.uk/ 

Only costs $200 for a drivers license in Kentucky. Tradesman continue to make more than recent college graduates. Jeremy Rosenthal on the reclassification of mariuana and the Adam Schiff residency case. Your texts and talkbacks on today's topics. Steadmans Lil Sports Corner. Jeff Monosso Illinois screening kids for mental health. Good plan?

Today was all about managing difficult neighbours!From being asked to keep the noise down to complaints about where you've parked your van, sometimes the neighbours can be a massive inconvenience. So today we wanted to know your top tips for keeping them at bay when you are working on a property?We were joined by Danny Madden and Dean Saxton to hear their advice. Plus as always there's the pub lunch quiz for your chance to grab yourself 6 points and you will hear the very best messages we received!

Too many good tradesmen and women are stuck working harder than ever… with barely anything to show for it. Long days, low margins, and no time to breathe.The problem? You're calling it a business, but really, you've just created yourself a hard fricken job.In this new episode, I break down the 5 mindset shifts that will help you step off the tools, take control, and finally start building a business that provides you and your family with the lifestyle you deserve. WHAT YOU WILL LEARN AND KEY ACTIONS FROM THIS EPISODE:1. Learn what numbers you must get top side of to increase profits2. Discover why doing everything yourself is killing your growth and how to fix it.3. Find out how to escape firefighting mode with a 12-month business vision.4. Understand how to protect your valuable time bank with 3 productivity strategies 5. Get the step-by-step mindset to go from tradesman to respected businessman Listen now to stop winging it and wasting years of time. Rise of The Trades Summit Tickets: Grab your ticket hereBECOME A MEMBER: Join our ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠Growth Club and get instant access⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠ to live marketing training, business coaching, courses and a thriving community of professional trades. Guaranteed to help you to achieve time and financial freedom. JOIN OUR FACEBOOK GROUP: Join our free and thriving ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠Facebook group and community ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠APPLY TO JOIN OUR INNER CIRCLE: Apply to join our 12-month ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠business and marketing coaching programme ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠WHO WE HELP AND SUPPORTAt the Trades Freedom Club, we help tradesmen and tradeswomen such as Plumbers, Heating Engineers, Electricians, Renewable Energy, Plasterers, Builders, Joiners, Roofers, Flooring, HVAC, Glazing, Scaffolders, CCTV, Security companies and Sub Contractors to build, grow and scale their trades or construction businesses.

Today on the show we were discussing the times where you tell the client a little too much information.Communicating with a client is vital to the success of any job and a happy customer - But sometimes it can go too far and you can accidentally say the wrong thing. So today we wanted to know when you told a client too much? We were joined by George McKenchie and Dan Brown who gave their advice on what's off limits when talking to a client. Plus as always there's the pub lunch quiz for your chance to grab yourself 6 points and you will hear the very best messages we received - Enjoy!

A North Clare firefighter, GAA Coach, Tradesman and Charity fundraiser extraordinaire who passed away following a tragic accident last week has been described as "the salt of the earth at his funeral mass". Clouna Church in Ennistymon was packed to capacity today to say goodbye to their own Joe Crosse.

Today was all about when banter goes too far and becomes bullying. With research showing that 21% of construction employees have experienced bullying in the last year, and almost 3 in 10 claiming the bullying was labelled as ‘banter'. We wanted to establish what's over the line and how we stop and ultimately prevent it on site! We were joined by GMB Union Rep Charlotte Brumpton-Childs and Jimmy Hendry for an insight into how bullying can occur and affect people on site. Plus as always there's the pub lunch quiz for your chance to grab yourself 6 points and you will hear the very best messages we received - Enjoy!

Send us a textThis week, John and Tim welcome Matt Sigler, Executive Director of Plumbing, Mechanical, and Fuel Gas at the International Code Council (ICC). Matt talks everything codes—from thought to adoption—a global, uniform code and the Windsor Declaration.The For The Pro® app is available for both iOS and Android devices through the Apple and Google app stores, download it today!Subscribe to the Appetite for Construction podcast at any of your favorite streaming channels and don't forget about the other ways to interact with the Mechanical Hub Team! Follow Plumbing Perspective IG @plumbing_perspective Follow Mechanical Hub IG @mechanicalhub Sign up for our newsletter at www.mechanical-hub.com/enewsletter Visit our websites at www.mechanical-hub.com and www.plumbingperspective.com Send John and Tim your feedback or topic ideas: @plumbing_perspective

In this episode of Ahead of the Curve, you'll hear innovative ideas on financial literacy programs and leveraging technology for better customer service from Anne Tangen, President and CEO of BankFive.Tune in as we discuss: How to engage customers in learning about improving their credit The role of financial literacy in getting the right loan products in front of customers What BankFive is doing to improve its customer experience with thoughtfully designed branches  How Tangen and her team have prioritized keeping a human touch in new self-serve technologies and how the investment has paid offAbout the guest:Anne P. Tangen joined BankFive in 2020 as its President and CEO. She has had a long and distinguished career in financial services, having served in various senior roles at Fidelity Investments, State Street Bank, and The Cooperative Bank of Cape Cod. A respected leader in the industry, she sits on several high-profile boards, including the Massachusetts Bankers Association and the Federal Reserve Bank of Boston's First District's Community Depository Institutions Advisory Council (CDIAC), which advises the Fed on the local economy, lending conditions, and other issues. In addition, she has been featured in the Boston Business Journal, Banker & Tradesman, and Bloomberg Radio Boston, and as a speaker at the New England Bankers Annual Conference and Future Branches Boston. Anne is involved in various local nonprofits, including the Alden Pettengill Foundation Board of Argosy Collegiate Charter School in Fall River and the Savings Banks Employees Retirement Association (SBERA). She also serves on the Endowment Committee for the Fall River Historical Society.Helpful links: Webpage: About | BankFiveWebpage: Change Management Services | AbrigoBlog: How accountants can leverage technology to boost client financial literacy, loyalty 

Today we are joined by Sergio, an American welder living and working in Japan. He shares his inspiring journey from U.S. shipyards to becoming the first foreign employee at a Japanese manufacturing company. We talk about his path to learning Japanese, getting the Specified Skilled Worker visa, adapting to life in Japan, and his thoughts on Japanese work culture, language, and society.Follow Sergio and learn about his work:https://www.instagram.com/sergsplurgehttps://wakita-develop.com/wakita/wp/Follow us on our social media:https://www.youtube.com/@unpackingjapanshortshttps://www.instagram.com/unpacking_japanhttps://www.tiktok.com/@unpackingjapanhttps://www.x.com/unpacking_japanhttps://www.facebook.com/unpackingjapanSubscribe for more in-depth discussions about life in Japan! Interested in working at a global e-commerce company in Osaka? Our parent company ZenGroup is hiring! To learn more, check out https://careers.zen.group/en/

Today's guest is Andrew Pristach. He's a Sergeant with Spartanburg FD's Rescue 60, owner of Tradesman Fire, co-designer of the Council TD30 Halligan, and an instructor with the Mississippi State Fire Academy. Andrew's also one of the founding members of Dixie Firemanship. He brings a sharp edge to topics like forcible entry, tool design, fire attack, and the uncomfortable truths about our training culture.

In this episode, Paul was asked a question about torquing and his thoughts on torque values and the changes from calibrated torque tools to now approved method. Paul also answers a question about SER being stripped out for use in raceways.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/master-the-nec-podcast--1083733/support.

In this episode, Paul was asked a question about tariffs and my thoughts on them and how it will help America become the greatest nation in the world. AGAIN.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul was asked a question about torquing and his thoughts on torque values and the changes from calibrated torque tools to now approved method. Paul also answers a question about SER being stripped out for use in raceways.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul was asked a question about torquing and his thoughts on torque values and the changes from calibrated torque tools to now approved method. Paul also answers a question about SER being stripped out for use in raceways.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

E97 | How tradesman can Lose Weight Without Exercise! I Was An ELECTRICIAN, But Now I Show Tradesmen how to get into shape and lose weight.In this episode of the Trade Legends Podcast, @MJTiffPlumbing sat down with Joe  @thetradesmanscoach to discuss all things health in the construction industry. Joe qualified as an electrician over 12 years ago, and even though he enjoyed his career as a tradesman in the construction industry, he decided to retrain as a Personal Trainer. Initially, he was able to comfortably balance the two jobs, but the personal training was starting to grow exponentially. Going against his parents' wishes, Joe decided to give up his 'steady' job as an electrician and become a full-time personal trainer and focus on the health of people in the trades.Guest this week: Joe  @thetradesmanscoach | joe_thetradesmanscoach (Insta)Hosts:Mark  @MJTiffPlumbing ⭐ Proudly Sponsored by Aspen Pump Groups | https://www.aspenpumps.com/en-gb⭐ Supported by Tradify | https://tradifyhq.com/ | @TradifyHQ

In this episode, Paul was asked a question about the location allowance of panels in locations such as stairwell areas and about the loads for a service or feeder with regards to EVSE. In fact, this episode may help clear up some confusion on some basic load calculations for those EV Lovers.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/master-the-nec-podcast--1083733/support.

In this episode, Paul was asked a question about the location allowance of panels in locations such as stairwell areas and about the loads for a service or feeder with regards to EVSE. In fact, this episode may help clear up some confusion on some basic load calculations for those EV Lovers.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul was asked a question about the location allowance of panels in locations such as stairwell areas and about the loads for a service or feeder with regards to EVSE. In fact, this episode may help clear up some confusion on some basic load calculations for those EV Lovers.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Meet Jason Liers, owner of Stone Ridge Remodeling, Inc. based in Cleveland, Tennessee. From growing up in a family of builders to navigating the highs and lows of running his own remodeling business, Jason shares his journey of resilience, reinvention, and the lessons learned along the way. He dives into the challenges of transitioning from tradesman to business owner, the power of mentorship, and how he rebuilt his company with a clear vision and strong processes. Jason's story is packed with valuable insights on perseverance, branding, and building a business the right way.     Here are some of the key takeaways from our discussion with Jason: Building a strong reputation drives business Essential systems for scaling Having the right mindset and perseverance   Learn more about Stone Ridge Remodeling here: https://stoneridgeremodeling.com/   Own a construction company and want to share your story? Apply to be on an upcoming episode of Builder Stories at https://www.builderstories.com

In this episode, Paul will talk about all the free content available from Electrical Code Academy, Inc. From the Blogs to free mobile apps with calculators, or even free online electrical courses. In todays episode we examine the FREEBIES.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/master-the-nec-podcast--1083733/support.

In this episode, Paul was asked to comment on a listener's situation where they want to go into business for themselves but are not sure they are ready. Listen as Paul gives them guidance on being your own boss and how to look forward rather than behind. This episode will inspire you to succeed.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/master-the-nec-podcast--1083733/support.

In this episode, Paul was asked to comment on a listener's situation where they want to go into business for themselves but are not sure they are ready. Listen as Paul gives them guidance on being your own boss and how to look forward rather than behind. This episode will inspire you to succeed.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul was asked to comment on a listener's situation where they want to go into business for themselves but are not sure they are ready. Listen as Paul gives them guidance on being your own boss and how to look forward rather than behind. This episode will inspire you to succeed.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul was asked to comment on a listener's situation where they want to go into business for themselves but are not sure they are ready. Listen as Paul gives them guidance on being your own boss and how to look forward rather than behind. This episode will inspire you to succeed.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

In this episode, Paul is asked to explain why the sizing rules for the common grounding electrode conductor per 250.64(D)(1) and how it applies when 250.66 is on the table. For example, sizing the common GEC when the grounding electrodes are ground rods. Well, in this episode you get the facts.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/master-the-nec-podcast--1083733/support.

In this episode, Paul is asked to explain why he blocks comments on his social media channels and why does he filter comments on those platforms, such as Tik Tok, Instagram, and Facebook? Also do the stupid comments get paul mad? Well, on this episode you get the facts. Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul is asked to explain the intent of 210.11(C)(2) Laundry Circuit and 210.52(F) Receptacle Outlets for dedicated areas for Laundry Equipment. So, what about the other receptacle outlets in the room or area or does it matter? Let's Go Pablo….Explain That CODE!If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/master-the-nec-podcast--1083733/support.

The 60-minute reggae mixtape show curated by Dubmatix showcases the finest Sticky Icky Reggae tunes from around the globe — spanning dub to dancehall, rocksteady to roots, and every rhythm in between. PLAYLIST Olinka, Brother Culture, Little Lion Sound - Reggae Roots & Vibes Dubmatix - Hot & Steady Upper Cut Band & Horseman - Live & Love Danny T & Tradesman, Earl 16 and Bim One - Distraction Trap Perfect Giddimani, Lutan Fyah & Dr Edward - Everyday Above Ground Is Good The Specials - Vote For Me Kiwi - Cure Dubarise & Soundfanger - Plantation Dub Nadia McAnuff & The SOA - Peace Begins Within Lenky Marsden - Twelve Thirty Tsadiq Section & Crootsy & Tribuman - Rising Theme Milton Blake - Nuclear Age Ikadub & Marcus I - Never Judge The Dub Chronicles - No Vaccine Pinnacle Sound, Emanuel & The Bionites - Psalm 2   Carry the show on your station. Get in touch dubmatix@dubmatix.com https://www.mixcloud.com/dubmatix/

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul is asked about bonding the metal water piping system and do you need to bond both the cold and hot water in a water piping system. We also clear up what is not considered a system and thus not required to meet 250.104(A).If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/master-the-nec-podcast--1083733/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul is asked about bonding the metal water piping system and do you need to bond both the cold and hot water in a water piping system. We also clear up what is not considered a system and thus not required to meet 250.104(A).If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul will talk about a discussion online pertaining to the required length of free conductor at each box as specified in 300.14 of the 2023 National Electrical Code. This is an interesting discussion and a worth wild discussion because it is a case of common sense versus what the letter of the NEC is as written. In Fact, in this episode Paul will give you his opinion and the option of NFPA, or at the least someone who supplied their opinion from NFPA. So, I hope you enjoy this episode with your morning coffee and thank you all for your continued support.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.PS: You can post your own questions to us at PaulAbernathy.com - It's FREE!Become a supporter of this podcast: https://www.spreaker.com/podcast/ask-paul-national-electrical-code--4971115/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul will talk about Arc Fault Circuit Interrupter devices, also known as AFCI Devices. They are available as circuit breakers or as receptacles devices. On today's podcast we will talk about the testing involved, on a 10,000' level, and the currents involved in series and parallel tests.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.PS: If you want some great videos check out https://fasttraxtube.com and subscribe today. Get 50% off with coupon code : 50OFFBecome a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.In this episode, Paul will talk about his opinion of Good Electricians vs Bad Electricians. There are many people who say good electricians are those who strive to go above the minimum standards of the National Electrical Code and those who do not are bad electricians. Well, on this episode Paul will give his opinion on the subject.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planetBecome a supporter of this podcast: https://www.spreaker.com/podcast/master-the-nec-podcast--1083733/support.

Talking shop updates, Makita event, Cantek Edgebander, and my thoughts after one year with the CNC.

As we covered the highlights of Chad's westward trip, head over to Asphalt Chasers for all the detail on the trip. Split into five segments and posted as episodes 20-24, enjoy! https://www.asphaltchasers.com/20 https://www.asphaltchasers.com/21 https://www.asphaltchasers.com/22 https://www.asphaltchasers.com/23 https://www.asphaltchasers.com/24 Lessons learned: * Take a small notebook to jot down thoughts, ideas, memories * Review your overall health and condition, consider if you should make the trip at all New bike for Chad: * 2017 Kawasaki Versys 1000: https://www.totalmotorcycle.com/motorcycles/2017/2017-Kawasaki-Versys1000-ABS-LT Chads new 2017 Kawasaki Versys 1000 https://media24.fireside.fm/file/fireside-uploads-2024/images/e/e9f8d2eb-9140-4ae8-8ade-c38bd0c47027/KmDYujxr.jpg Mini review of Corbin seat on Rich's VFR: https://www.corbin.com/honda/hvfr814e.shtml * Rough to start, numbing in legs * Starting to break in and will report back * Looked at GSXS 1000 GT again, likely not a replacement for VFR just yet New truck for Rich: * 2024 Ram 2500 Tradesman - 6.4 Hemi 2024 Ram 2500 Tradesman https://media24.fireside.fm/file/fireside-uploads-2024/images/e/e9f8d2eb-9140-4ae8-8ade-c38bd0c47027/QFYpmPNE.jpeg Pivot to Guns: * Banish 45: https://www.silencercentral.com/products/banish-45/ * Avidity Arms PD10: https://avidityarms.com/pd10-pistol/ * MCX Spear line from Sig Sauer: https://www.sigsauer.com/mcx-spear-6-8-x-51.html * Dr. Martin Fackler and others on Terminal Ballistics: https://www.everydaymarksman.co/marksmanship/terminal-ballistics/ * NRA Annual Meeting: https://www.nraam.org/

Welcome back to the Ol' Boy Podcast! In today's episode, we're diving deep with our special guest, John Michael Stewart—an industrious social media sensation from South Arkansas who's taken blue-collar trades and turned them into online gold. Join us as we uncover John Michael's journey from working 60-hour weeks and climbing the ranks in the trades industry to cruising in a tricked-out truck he's earned through smart marketing and trade deals. You'll hear about his adventures at truck shows, his passion for mud rides, and the incredible camaraderie he's built with fans and other creators, including the hilarious Ginger Billy.John Michael's social media success didn't come easy. We'll discuss the laborious yet rewarding path of juggling a traditional job with the demands of a burgeoning online presence, and how he ultimately took the courageous leap to focus full-time on his passion. From his first job at AutoZone to mastering trades like welding and crane operation, to navigating the complex world of social media analytics, John shares invaluable insights and candid stories that you won't want to miss.We'll also tackle the lighter side of his content creation—from hilarious character development inspired by real-life coworkers to his popular and sometimes controversial videos that have amassed millions of followers. And don't miss John's funny and heartfelt recount of local culture and favorite pastimes like crawfish boils and side-by-side rides in South Arkansas.Whether you're intrigued by gritty work ethics, social media strategies, or the humorous, human stories behind viral sensations, this episode has something for everyone. Stay tuned, and let's get started with John Michael Stewart on the Ol' Boy Podcast! Hosted on Acast. See acast.com/privacy for more information.

Joined on this episode by Andrew Pristach and we had a lot of topics to cover!  We discuss forcible entry and training realism. Skill acquisition, training theory and stress.  Tool design and the challenges and processes involved. Of course that is just what we had planned and does not include the wonderful topics and questions from the audience! Enjoy!!!