Podcast appearances and mentions of bill griggs

In this in-depth episode, Sarah is joined by the infamous Bill Griggs, a highly acclaimed Australian physician and trauma specialist who has left a mark on the field of medicine through his innovative contributions to trauma care and disaster response.  With his career spanning over four decades, Bill has been a true pioneer in the development of life-saving techniques, including the Griggs Technique, for aiding breathing issues.   Bill's expertise extends beyond the boundaries of Australia as he has played pivotal roles in international disaster relief efforts, as well as in a number of military deployments, starting with the 1991 Gulf War, where he served on a US Navy hospital ship and aircraft carrier, a dedicated educator and leader in the healthcare community.   Alongside sharing his amazing stories of heroism, Bill talks about the impact these experiences had on his mental health and the importance of reaching out for help when you truly need it. Listen to Bill share his first-hand accounts & show why he is a true inspiration to all of us!

In this episode, Fitz and Terry chat with electric model innovator, Bill Griggs. Super Timber (5:00) RC10T (13:45) Meet Bill (21:00) Pioneers (30:00) Build by phone (47:00) Little Tiny (1:09:30) Klingberg (1:34:15) Comet Gull (1:42:30) Backlog (1:48:00) Watch this episode on YouTube E-flite Super Timber Associated Electrics Klingberg videos Facebook CNC help group NEAT Fair

A 40 hour long raid. This was Derrick McManus' day at work in May 1994. Shot 14 times in a mere 5 seconds, and bleeding out on the ground for 3 hours.  Derrick is a 40-year veteran of the South Australia Police. After joining the force in 1976, he moved up the ranks and was eventually selected for the exclusive STAR Group, an elite tactical special operations unit that took on some of the state's most intense cases.  In this episode, Derrick tells host, Brent Sanders, how an arrest warrant turned into what would become South Australia's largest siege, with the offender firing over 2500 rounds in 40 hours, and how he managed to survive against all odds. If this content affects you, the number for Lifeline is 13 11 14. See omnystudio.com/listener for privacy information.

Dr Bill Griggs speaks with Matthew Pantelis. He's one of two senior clinicians who are heading up an inquiry into concerning claims by Dr David Pope from SASMOA about patients being ramped being off loaded and having preferential treatment over those waiting in the ED.See omnystudio.com/listener for privacy information.

The Brian D. O'Leary Show February 3, 2023   Today's show brought to you by O'Leary Beef and Southside Market & Barbecue. Set up your “Big Game” party with pit-roasted meats from Texas delivered to your front door.   Fountain.FM Listen and support us at the same time over at Fountain.FM   A tragic day, but “the Music” continued The legendary rock ‘n' roller Buddy Holly headlined a package show in early 1959, known as the Winter Dance Party. The itinerary was bananas. It covered twenty-four Midwestern cities in twenty-four days—there were no off days. The tour schedule crisscrossed the upper Midwest with no apparent logic. Overnight jaunts of several hundred miles—all in sub-freezing temperatures—were commonplace. Holly historian Bill Griggs had this to say about General Artists Corporation (GAC)—the operation which booked the tour: "They didn't care. It was like they threw darts at a map… The tour from hell—that's what they named it—and it's not a bad name." On February 2nd, the show in Clear Lake, Iowa ended, and the tour headed about 400 miles northwest from Clear Lake to Morehead, Minnesota. Holly famously chartered a plane for his band prior to the show. Buddy was concerned with getting some rest and making a head start to take care of some much-needed laundry for him and his tour mates. Ultimately, only the headliners of the show took the charter. Waylon Jennings, then playing bass guitar in Holly's band, said he felt more comfortable riding on the tour bus and voluntarily gave up his seat to J.P. Richardson, the Beaumont, Texas disc jockey and tour co-headliner, known as The Big Bopper. Richardson felt ill and needed rest. The Winter Dance Party consisted of several contemporary and would-be stars. Yet the party ended on February 3, 1959, for the 22-year-old Holly and 28-year-old Big Bopper when the plane went down in a blizzard shortly after takeoff, five miles northwest of Mason City, Iowa. Also perishing in the infamous crash was 17-year-old Ritchie Valens of “La Bamba” fame. Yet the tour played on. Sadly, in retrospect. Future chart-topper Bobby Vee, then but 15-years-old, had Buddy Holly's material down cold. So, the Minnesota child filled in—in place of Holly—on February 3 in Morehead. Jimmy Clanton, Frankie Avalon, and Fabian ultimately finished the tour in the place of the deceased stars. Waylon couldn't get to Holly's funeral. GAC wouldn't let him leave the tour. To add insult to injury, venue managers regularly threatened non-payment for shows because the original headliners didn't appear. It didn't matter that they had perished in a tragedy. After the crash, Jennings continued for two more weeks on the tour with doo-wop stars Dion and the Belmonts amongst others. Lead singer Dion DiMucci is the last original headliner still alive today and is in his early 80s. Jennings returned to Lubbock, Texas after the tour ended. Holly's father looked after young Waylon. In Waylon: An Autobiography, Jennings wrote: “Mr. Holley wanted to promote me, because he said Buddy believed in me, but I had enough sense to know that wouldn't be right. He bought me clothes and things like Buddy would.” Waylon returned to the job that got him noticed by Buddy Holly in the first place, as a radio disc jockey. He bounced around west Texas and Arizona as a DJ for the better part of a decade before he reappeared in the public consciousness as a musician once again in the late 1960s. So, contrary to the schmaltz unleashed by Don McLean in 1971, “music" did not die that day. It is more than unsettling that American Pie, McLean's terrible—and entirely too long of a—song, is what the hacky news sites reference on a day like this, the anniversary of the plane crash. But never fear, it happens every February 3rd. Diving into the McLean biography is more than a little unsettling as well. To wit: after his second divorce (from his wife of nearly 30 years) with accusations of abuse hanging over him, the now 77-year-old McLean took up with a “model and reality star” 48 years his junior. McLean still lives off the reputation of that crappy half-century-plus old song. Unfortunately, in my early twenties, I purchased some McLean music, but it was because it was a double-album of McLean's and Jim Croce's music. Croce was good, if not great. He also died in a tragic airplane crash. We wrote about Croce a while ago. https://briandoleary.substack.com/p/if-i-could-save-time-in-a-bottle Anyway, this is all a long way of saying, rock out to some Buddy Holly today, or sing along with “La Bamba,” or get a little “Chantilly Lace” pumping through the airwaves. Perhaps go with a doo-wop session of Dion and the Belmonts. “The Wanderer” by Dion when he went solo is also a great tune. There is never a bad day to play Waylon Jennings music or play it loud. I already listened to the horrible American Pie today. I can confirm that it is as bad as I remember and I feel like less of a man for not trusting my memory.   Links: Winter Dance Party Tour Schedule, 1959 Buddy Holly The Big Bopper Ritchie Valens Waylon Jennings Dion DiMucci Don McLean, 76, steps out with his model girlfriend Paris Dylan, 28, ahead of his performance at Manchester Bridgewater Hall Why the Beatles owe their success to the Comanche Indians   For your premium meats: O'Leary Beef   For all the rest of it, go to BrianDOLeary.com for more information.

The wife of a man who tragically died in the Canadian Rockies has thanked him for inviting her into his world of adventure. Direct entry and exit access from an upgraded South Rd will be built to the Adelaide Crows' proposed new HQ. A home handyman, who did work on well-known trauma specialist Dr Bill Griggs' Goolwa South holiday home, is facing a string of charges. Metropolitan councils have sold 15 properties to recoup outstanding ratepayer debts.For updates and breaking news throughout the day take out a subscription at advertiser.com.auSee omnystudio.com/listener for privacy information.

CENTROIDCNC ACORN UPDATECNC Router Tips Podcast Episode 65: CNCRT65What is the CentroidCNC Acorn? The Acorn is a User Friendly, DIY CNC Control board for Milling Machines, Lathes, Routers Tables and other CNC Machines. In this episode of the CNC Router Tips Podcast Bill Griggs talks about his experiences with the CentroidCNC Acorn. We discuss the Acorn Updates from the earlier version of the CNC Control board to the present version. Some of those features are more relays, status LEDs and removable header sockets. With CNC12 controller software users can control CNC router tables, Milling machines, lathes and more from the same basic interface with modifications for each type of machine. Bill Griggs has also been working on converting a Rhino ST-6 CNC lathe to work with a CentroidCNC Acorn with Closed loop Stepper motors. If you would like more information about CentroidCNC, check out Episode 54. https://www.cncroutertips.com/54The #CNC Router Tips Facebook group has just passed 19,550 members! If you would like to check out the group, join us at https://www.facebook.com/groups/cncroutertipsBill Griggs contact info:Twitter: @BillGriggsWebsite: http://www.cncroutertips.comSHOW NOTES: http://www.cncroutertips.com/65WEBSITES MENTIONEDDisclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.CentroidCNC Acorn https://www.centroidcnc.com/centroid_diy/acorn_cnc_controller.htmlThe Makers Guide http://themakersguide.com#CNC Router Tips https://www.facebook.com/groups/cncroutertips/Mach3 Software http://www.themakersguide.com/home/products/mach3CNC Starter Bit set http://cncroutertips.com/bitsVCarve Demo Video http://cncroutertips.com/demoVCarve Software http://themakersguide.com/vcarve8Triple Edge Finder http://themakersguide.comMaker Masters http://makermasters.comResources http://cncroutertips.com/resourcesYoutube https://www.youtube.com/c/BillGriggs/featured

CNC ROUTER TIPS IS BACKCNC Router Tips Podcast Episode 64CNCRT64: CNC Router Tips Is BackIt has been a while but CNC Router Tips is back. In this episode we discuss the many changes and adventure that we have been working through since the last episode. Bill Griggs went back to school to study Entrepreneurship and grow his CNC Router Table Business. While this has been going on Bill learned  a bunch about things he was doing wrong and how to do things better.I have been working on converting a Rhino ST-6 CNC lathe to work with a CentroidCNC Acorn with Closed loop Stepper motors. We discussed the CentroidCNC Acorn in Episode 54. The #CNC Router Tips Facebook group has just passed 19,550 members! If you would like to check out the group, join us at https://www.facebook.com/groups/cncroutertipsBill Griggs contact info:Twitter: @BillGriggsWebsite: http://www.cncroutertips.comSHOW NOTES: http://www.cncroutertips.com/64WEBSITES MENTIONEDDisclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.CentroidCNC Acorn https://www.centroidcnc.com/centroid_diy/acorn_cnc_controller.htmlMark Lindsay CNC https://marklindsaycnc.comSmartScreens https://ngeneyes.com/smartscreen/licensing/SmartScreens For Mach3 Triple Edge Finder https://www.youtube.com/watch?v=FUlXikOPHbwThe Makers Guide http://themakersguide.com#CNC Router Tips https://www.facebook.com/groups/cncroutertips/Mach3 Software http://www.themakersguide.com/home/products/mach3CNC Starter Bit set http://cncroutertips.com/bitsVCarve Demo Video http://cncroutertips.com/demoVCarve Software http://themakersguide.com/vcarve8Triple Edge Finder http://themakersguide.comMaker Masters http://makermasters.comResources http://cncroutertips.com/resourcesYoutube http://youtube.com

Howdy y'all! Listen in on how Bill Griggs used to work in a movie theater back in 1947.T for Texas is a short weekly History show, where Dr. T Lindsey Baker takes you on a journey throughout all of Texas' history one local story at a time.Tfortexas.org

Howdy y'all! Listen in on how Bill Griggs used to work in a movie theater back in 1947.T for Texas is a short weekly History show, where Dr. T Lindsey Baker takes you on a journey throughout all of Texas' history one local story at a time.Tfortexas.org

TULSA'S BEST KEPT SECRET?My guest today is Bill Griggs, the Chapter Chair of SCORE Tulsa. SCORE is a nationwide volunteer organization dedicated to helping individuals intending to start a small business and those already in business. The organization started in 1964 and now has more than 10,000 members and 369 Chapters. SCORE is a resource partner with the US Small Business Administration. The Tulsa SCORE Chapter has about thirty active members.  Members' background includes holding executive and managerial positions in manufacturing, construction, international sales, pharmacy, oil & gas, aerospace, public relations, and other areas.WHAT WE DISCUSSBill starts with his roots of growing up on a farm. He learned great life lessons through the time that he served in the Air Force. He tells about the desire he had to become a manager and how this path started with his move to IBM. After 42 years with IBM, he has decided to spend his retirement golfing, being on the board of Tulsa Boys home, and much more. You'll hear about his role in the Tulsa Chapter of Score and why he enjoys it so much. He also shares the history of the SCORE organization. We discuss the resources they offer, the process for getting mentored, and even how to become a mentor yourself. His goal is that SCORE doesn't remain one of Tulsa's best-kept secrets. http://www.tulsa.score.orgSupport the show (https://www.buymeacoffee.com/thisistulsa)

Therapists in Private Practice are excellent at their craft ... the work they do day in and day out.  However, as one myself, we are not great at the business of Private Practice. Very few therapists that I know, have a strong business background. There are always exceptions to everything, so they are a few who are mastering the business side of the practice. But the majority are not. And that is why in this episode, you will discover the importance of learning how to go from a therapist in private practice to what I refer to as a psychopreneur.  A psychopreneur is simply someone who has learned how to apply an entrepreneurial grid over their practice. This grid will allow them to generate more money without adding more clients.  It's a mindset shift that takes them from a one-to-one setting, to a one-to-many and to automation. Some people refer to this as generating passive income. In this episode, you will hear the host - Kingsley Grant - being interviewed by Bill Griggs on why a psychotherapist should become an psychopreneur.

In this week's episode of The Adelaide Show, we invite you to an audience with an epidemiologist during the Covid-19 pandemic, and we're doing this so you can be armed with more understanding of the complexity of this field and why our health authorities make decisions we often don't understand. Dr Jacqueline Stephens, Research Fellow and Epidemiologist at Flinders University, is our special guest and we were also joined by former host, Nigel Dobson, cognitive scientist. In the Musical Pilgrimage, we have a perfect song by Fergus Maximus, which is most fitting during this time of Covid-19 restrictions. To kick things off, in the SA Drink Of The Week, we return to Rojomoma for a hearty, Barossan red. You can navigate episodes using chapter markers in your podcast app. Not a fan of wine? You can click next to jump to the next chapter in the show. We're here to serve! And please consider becoming part of our podcast by joining our Inner Circle. It's an email list. Join it and you might get an email on a Sunday or Monday seeking questicon ideas, guest ideas and requests for other bits of feedback about YOUR podcast, The Adelaide Show. Email us directly and we'll add you to the list: podcast@theadelaideshow.com.au If you enjoy the show, please leave us a 5-star review in iTunes or other podcast sites, or buy some great merch from our Red Bubble store - The Adelaide Show Shop. We'd greatly appreciate it. And please talk about us and share our episodes on social media, it really helps build our community. Oh, and here's our index of all episode in one concise page Running Sheet: An audience with an epidemiologist during the Covid-19 pandemic 00:00:00 Intro Introduction to the show. 00:02:13 SA Drink Of The Week The SA Drink Of The Week is a Red Art Shiraz from Rojomoma in the Barossa Valley. We taste it with winemaker, Sam Kurtz. 00:10:34 Dr Jaqueline Stephens, an epidemiologist I've been saddened by the growing volume (both noise level and number of voices) of people who are citing anti-science and consipiracy-theory views about our government's approach to dealing with Covid-19. And it is not so much the content - although that's misleading enough, eg, I already have my Covid vaccine it's called Vitamin D - but there is a snide and toxic tone to the commentary. At a time when we all need to be working together for the common good, these voices of dissent are dangerous. As our contribution to helping inform public debate, I am joined by fellow podcast host and cognitive scientist, Nigel Dobson, and Dr Jacqueline Stephens, Research Fellow and Epidemiologist at Flinders University. Thank you both for braving a heatwave day to join me. I'd like to start by getting some reactions to a little grab bag of thoughts and comments, then settle into some definitions, and then dive more deeply into the complexities of your field, Jacqueline, as an epidemiologist. Grab bag one: Heat wave - I've heard someone say that we're lucky Covid struggles in heat and thrives in the cold, unlike some other threats. True? Grab bag two: Serving food today. I had to find separate dishes for our allocation of olives. Grab bag three: I'd like to insert a reading here from The Plague by Albert Camus (read by Luke, on the episode of Blind Insights entitled, The Plagues of 2020). In that passage, Camus writes that the plague never dies or disappears for good; it can lie dormant for years and years in furniture and linen-chests, etc. Is this generally true? Grab bag four: Former guest, Dr Bill Griggs just shared a thought about vaccinations - sure to be a hot topic again. The right to choose not to vaccinate is like the right to chose not to drive on the correct side of the road. Both are expressions of individual freedom. Both may cost you your life. And both may result in death or injury to others. - Quick comment? Jacqueline, can you give us an overview of your field because Susan Payne writes: Infectious disease epidemiology (which includes the epidemiology of viruses) is the study of the complex relationships among hosts and infectious agents. Epidemiologists are interested in virus spread or transmission, with or without disease. Viral epidemiologists try to predict the potential for development of epidemics, and a very important part of their job is to define the kinds of interventions that could contain a virus outbreak. Veterinarians are often concerned with threats to food animals (how a disease of food animals might be spread, or be introduced into a disease-free area). The keywords being complex relationships, hosts and infectious agents, predictions, and interventions. Nigel references this book: The Hot Zone. Steve references this podcast episode, Anatomy of a Pandemic, from the This Pathological Life podcast. How much relative effort goes into epidemiology in chronic illness (heart disease, diabetes etc) , acute illnesses (annual diseases such as flu, chicken pox) and acute pandemics (e.g. COVID)? How often are the various studies and data collections done? (So weekly flu vs. annual heart, cancer studies?) What level is this done at, National , or State? Is it done by the government,private industry of Academia? How does epidemiology influence the funding,policy and work effort in dealing with various health issues? What sort of criteria is used for what we track and what we don't? As more people start tracking their health, steps, heart rate, oxygen levels etc., what sort of impacts will this have on epidemiology? What have been some of the negative impacts of not having any good epidemiological data in certain medical issues? What are the major challenges in the industry? Too much data, changing health priorities, changing government policy, peoples apathy about their health ? etc. On this note, in a recent Sam Harris podcast, Pandemic of Incompetence, Nicholas A. Christakis, MD, PhD, MPH, the Sterling Professor of Social and Natural Science at Yale University, stated: that Trump was advised of the upcoming pandemic in December last year. Now, Trump's not the best example of a proper leader, but if he was briefed surely other leaders were. What blocks government's taking a science-based, timely response to findings of epidemilogists? How has the field changed over the past 30 years with the increased access to computing systems and technology? Given that many actions taken in response to epidemics seem to be counter intuitive to the uninformed, has our access to social media - we all have megaphones - made public health interventions harder? For example, I heard someone loudly complaining (and being supported) that why should a miner in Coober Pedy have to go into lockdown for our recent hard lockdown, when the activity was in Adelaide? When people are self reporting on health issues , how do you get them to give honest answers and not the answer they think the epidemiologists / researchers would want to hear? If people or their kids  are interested in working in this area what sort of education would they want to get? Has there been a public health upside to our new behaviours? 01:59:47 Musical Pilgrimage In the musical pilgrimage, we have a song, Closer To You by Fergus Maximus. This song is taken from a live EP called, One Gaslit Night, recorded at The Gaslight Tavern in Adelaide during August 2015.Fergus sings and plays sax on the EP, accompanied by Kym Perry played guitars (both acoustic and electric) and stompbox, and Jamie Harrison played basses (both electric and acoustic).This song captures the spirit of those living in quarantine - they are much closer to their family than they possibly ever wanted, while still being distant. Support the show: https://theadelaideshow.com.au/listen-or-download-the-podcast/adelaide-in-crowd/ See omnystudio.com/listener for privacy information.

CNC FOR BEGINNERS WITH MARK LINDSAYCNC Router Tips Podcast Episode 63CNCRT63: CNC For Beginners With Mark LindsayI think you will enjoy this episode of the CNC Router Tips Podcast because you get to meet Mark Linsay of Mark Lindsay CNC. Mark Lindsay built his first CNC router using plans from Dave Gatton. Since then Mark has grown from a man needing help to a man giving help to the CNC community. His CNC tutorials on his Youtube channel have helped many CNC beginners to get squared away. Mark Lindsey is the administrator of the CNC For The Beginner group on Facebook where nearly 9000 members meet and share information about CNC routers, milling machines and laser cutters. Members share information, files and opinions with each other.Mark's interest in CNC router started when he wanted to build a Cigar Box guitar using a CNC router. Mark dived in and began researching how to build a CNC Router Table. Bill Griggs contact info:Twitter: @BillGriggsWebsite: http://www.cncroutertips.comSHOW NOTES: http://www.cncroutertips.com/63WEBSITES MENTIONEDDisclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals. Mark Lindsay CNC https://marklindsaycnc.comDave Gatton http://www.davegatton.comSmartScreens https://ngeneyes.com/smartscreen/licensing/SmartScreens For Mach3 Triple Edge Finder https://www.youtube.com/watch?v=FUlXikOPHbwMach3 Software http://www.themakersguide.com/home/products/mach3The Makers Guide http://themakersguide.com#CNC Router Tips https://www.facebook.com/groups/cncroutertips/Mach3 Software http://www.themakersguide.com/home/products/mach3CNC Starter Bit set http://cncroutertips.com/bitsVCarve Demo Video http://cncroutertips.com/demoVCarve Software http://themakersguide.com/vcarve8Triple Edge Finder http://themakersguide.comMaker Masters http://makermasters.comResources http://cncroutertips.com/resourcesYoutube http://youtube.com Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click "View in iTunes"Next Click on ratings and reviews in iTunesClick the "Write a Review" buttonLeave an honest rating and write a review.

CNC FOR BEGINNERS WITH MARK LINDSAYCNC Router Tips Podcast Episode 63CNCRT63: CNC For Beginners With Mark LindsayI think you will enjoy this episode of the CNC Router Tips Podcast because you get to meet Mark Linsay of Mark Lindsay CNC. Mark Lindsay built his first CNC router using plans from Dave Gatton. Since then Mark has grown from a man needing help to a man giving help to the CNC community. His CNC tutorials on his Youtube channel have helped many CNC beginners to get squared away. Mark Lindsey is the administrator of the CNC For The Beginner group on Facebook where nearly 9000 members meet and share information about CNC routers, milling machines and laser cutters. Members share information, files and opinions with each other.Mark's interest in CNC router started when he wanted to build a Cigar Box guitar using a CNC router. Mark dived in and began researching how to build a CNC Router Table. Bill Griggs contact info:Twitter: @BillGriggsWebsite: http://www.cncroutertips.comSHOW NOTES: http://www.cncroutertips.com/63WEBSITES MENTIONEDDisclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals. Mark Lindsay CNC https://marklindsaycnc.comDave Gatton http://www.davegatton.comSmartScreens https://ngeneyes.com/smartscreen/licensing/SmartScreens For Mach3 Triple Edge Finder https://www.youtube.com/watch?v=FUlXikOPHbwMach3 Software http://www.themakersguide.com/home/products/mach3The Makers Guide http://themakersguide.com#CNC Router Tips https://www.facebook.com/groups/cncroutertips/Mach3 Software http://www.themakersguide.com/home/products/mach3CNC Starter Bit set http://cncroutertips.com/bitsVCarve Demo Video http://cncroutertips.com/demoVCarve Software http://themakersguide.com/vcarve8Triple Edge Finder http://themakersguide.comMaker Masters http://makermasters.comResources http://cncroutertips.com/resourcesYoutube http://youtube.com Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click "View in iTunes"Next Click on ratings and reviews in iTunesClick the "Write a Review" buttonLeave an honest rating and write a review.

PBF57: Repurpose Your Content To Grow Your AudienceBy Bill Griggs and Kingsley GrantPodcast By Friday Episode 57:Repurpose Your content to rapidly grow their audience, increase their influence and monetize your work ... Repurpose is defined as: 1. to find a new use for an idea, product, or building: 2. to use something for a different purpose to the one for which it was originally intended.Nobody can afford to spend money on advertisements that don't move the needle. Ads that don't convert, that don't do anything to help grow your business. You should only spend your money on ads that make a difference. And if you don't have an Ad budget to spend, there are other ways to achieve the same result. By putting out content in places where people see it, where people can react to it. and where people want to be involved with it. That is the most important reason for repurposing your content.You've got to go and try to see what works. You have to measure what is working, and then you make adjustments. There is no instant home run where you can say, "Well, I'm going to put everything out in Facebook, and life will be great, or I'm going to put everything out and Pinterest, and will life will be great, Or I'm going to go strictly with LinkedIn. And life will be great." You can't just do that. You have to actually try those things, and measure the results. Just having a Facebook tracking pixel on your page, or on in your episode, is not enough. You have to go in and you have to make some adjustments and settings inside of the Facebook ad manager so that it accurately tracks the results, not just that somebody's been to your page. That's a whole other episode, The ways we have used:Transcript Audio and Videodesignrr.ioCall To Action Request to be a part of our Facebook group at facebook.com/groups/podcastbyfridayPost a link to your original content and the link to where you repurposed it. We will critique your progress and share it with the group.Resources Mentioned:One Funnel Away Challenge - ClickFunnels http://www.podcastbyfriday.com/ofachallengeNote: *some of the links above are affiliate links. Podcast By Friday is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are not given any free products, services or anything else in exchange for mentioning them on our site. The only consideration is in the form of affiliate commissions.Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. One Funnel AwayOne Funnel Away Challenge - ClickFunnels http://www.podcastbyfriday.com/ofachallengeNote: *some of the links above are affiliate links. Podcast By Friday is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are not given any free products, services or anything else in exchange for mentioning them on our site. The only consideration is in the form of affiliate commissions.Contact Information:Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comWebsites MentionedOne Funnel Away Challenge http://www.podcastbyfriday.com/ofachallengeClickFunnels 14 Day Free Trial https://www.podcastbyfriday.com/freetrialWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburnerWP Profit Builder http://www.podcastbyfriday.com/builderThrive Global https://thriveglobal.com/Anchor FM https://anchor.fmMedium https://medium.com SHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/30

PBF57: Repurpose Your Content To Grow Your AudienceBy Bill Griggs and Kingsley GrantPodcast By Friday Episode 57:Repurpose Your content to rapidly grow their audience, increase their influence and monetize your work ... Repurpose is defined as: 1. to find a new use for an idea, product, or building: 2. to use something for a different purpose to the one for which it was originally intended.Nobody can afford to spend money on advertisements that don't move the needle. Ads that don't convert, that don't do anything to help grow your business. You should only spend your money on ads that make a difference. And if you don't have an Ad budget to spend, there are other ways to achieve the same result. By putting out content in places where people see it, where people can react to it. and where people want to be involved with it. That is the most important reason for repurposing your content.You've got to go and try to see what works. You have to measure what is working, and then you make adjustments. There is no instant home run where you can say, "Well, I'm going to put everything out in Facebook, and life will be great, or I'm going to put everything out and Pinterest, and will life will be great, Or I'm going to go strictly with LinkedIn. And life will be great." You can't just do that. You have to actually try those things, and measure the results. Just having a Facebook tracking pixel on your page, or on in your episode, is not enough. You have to go in and you have to make some adjustments and settings inside of the Facebook ad manager so that it accurately tracks the results, not just that somebody's been to your page. That's a whole other episode, The ways we have used:Transcript Audio and Videodesignrr.ioCall To Action Request to be a part of our Facebook group at facebook.com/groups/podcastbyfridayPost a link to your original content and the link to where you repurposed it. We will critique your progress and share it with the group.Resources Mentioned:One Funnel Away Challenge - ClickFunnels http://www.podcastbyfriday.com/ofachallengeNote: *some of the links above are affiliate links. Podcast By Friday is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are not given any free products, services or anything else in exchange for mentioning them on our site. The only consideration is in the form of affiliate commissions.Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. One Funnel AwayOne Funnel Away Challenge - ClickFunnels http://www.podcastbyfriday.com/ofachallengeNote: *some of the links above are affiliate links. Podcast By Friday is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are not given any free products, services or anything else in exchange for mentioning them on our site. The only consideration is in the form of affiliate commissions.Contact Information:Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comWebsites MentionedOne Funnel Away Challenge http://www.podcastbyfriday.com/ofachallengeClickFunnels 14 Day Free Trial https://www.podcastbyfriday.com/freetrialWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburnerWP Profit Builder http://www.podcastbyfriday.com/builderThrive Global https://thriveglobal.com/Anchor FM https://anchor.fmMedium https://medium.com SHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/30

Bill Griggs is the founder of the CNC Router Tips group on Facebook with over 15,000 members and the creator of the CNC Router Tips Podcast. He also has a website called The Maker’s Guide on which he sells a device that he designed called the Triple Edge Finder. In this episode we discuss a ... Read more

PBF56: Getting To Your Goals Faster Through Podcasting … By Bill Griggs and Kingsley GrantPodcast By Friday Episode 56:to rapidly grow their audience, increase their influence and monetize your work ... (Why setting goals is still important - Not their fault that they have not attained their goalBlogging has lost its appeal; not as popularIt’s hard to get found unless you throw a lot of money at it. It’s hard for the average guy to compete; get startedFear that it won’t work That they would be seen as just like othersNot being able to Suspicion of us trying to sell them on podcastingSkeptical of making this leapHawk their productsSecret of using this platform to make moneyOthers would tell you that Blogging is the way to go for SEO juice and Google searchSocial Media feed changes so quickly; your post gets lost in the shuffle. A podcast is evergreen - always thereGoogle and none of the other “platforms” can slap you; shut you down …Podcasting is their new vehicleIt gets them as much and more of SEO etc because of shownotes and more platforms such as iTunes, etc.The speed at which Podcast can get you to your overall goals Call To ActionListen to httP://www.podcastbyfriday.com/32 How to achieve your goals: goal setting tips”Resources Mentioned:One Funnel Away Challenge - ClickFunnels http://www.podcastbyfriday.com/ofachallengeNote: *some of the links above are affiliate links. Podcast By Friday is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are not given any free products, services or anything else in exchange for mentioning them on our site. The only consideration is in the form of affiliate commissions.Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comWebsites MentionedForbes Magazine https://www.forbes.com/sites/forbesagencycouncil/2017/05/17/websites-as-we-know-them-are-dead/#7f8b50e63d38One Funnel Away Challenge http://www.podcastbyfriday.com/ofachallengeEntrepreneur On Fire https://www.eofire.com/Smart Passive Income https://www.smartpassiveincome.com/WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Podcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comSHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/30

PBF56: Getting To Your Goals Faster Through Podcasting … By Bill Griggs and Kingsley GrantPodcast By Friday Episode 56:to rapidly grow their audience, increase their influence and monetize your work ... (Why setting goals is still important - Not their fault that they have not attained their goalBlogging has lost its appeal; not as popularIt’s hard to get found unless you throw a lot of money at it. It’s hard for the average guy to compete; get startedFear that it won’t work That they would be seen as just like othersNot being able to Suspicion of us trying to sell them on podcastingSkeptical of making this leapHawk their productsSecret of using this platform to make moneyOthers would tell you that Blogging is the way to go for SEO juice and Google searchSocial Media feed changes so quickly; your post gets lost in the shuffle. A podcast is evergreen - always thereGoogle and none of the other “platforms” can slap you; shut you down …Podcasting is their new vehicleIt gets them as much and more of SEO etc because of shownotes and more platforms such as iTunes, etc.The speed at which Podcast can get you to your overall goals Call To ActionListen to httP://www.podcastbyfriday.com/32 How to achieve your goals: goal setting tips”Resources Mentioned:One Funnel Away Challenge - ClickFunnels http://www.podcastbyfriday.com/ofachallengeNote: *some of the links above are affiliate links. Podcast By Friday is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are not given any free products, services or anything else in exchange for mentioning them on our site. The only consideration is in the form of affiliate commissions.Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comWebsites MentionedForbes Magazine https://www.forbes.com/sites/forbesagencycouncil/2017/05/17/websites-as-we-know-them-are-dead/#7f8b50e63d38One Funnel Away Challenge http://www.podcastbyfriday.com/ofachallengeEntrepreneur On Fire https://www.eofire.com/Smart Passive Income https://www.smartpassiveincome.com/WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Podcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comSHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/30

PBF54: 7 Secrets To Go From Blogging To PodcastingBy Bill Griggs and Kingsley Grant 7 Secrets To Go From Blogging To PodcastingSecret #1: Know whyWhy are you doing it?MobilityEasy accessReach an audience that doesn’t like to read - consume contentSecret #2: It’s possibleNot as complicated as you might thinkDIY for budgeting reasonsResources:Otter.aiVAsOutsourcingSecret #3: Get used to speaking out loudThoughts get disentangled through the lips and the fingertipsFinding your voiceAttend a Toastmasters GroupSecret #4: Sound better than you thinkYou’re so used to your voice it seems terribleSecret #5: Overcome false beliefsI’m not a speakerNo one will listen to meI don’t know how to operate technologyI don’t have to sound like NPRSecret #6: Good enough - release itDone is better than perfectSecret #7: Your WhatWhat difference will this make that blogging may not be able to fulfill?What problem you’re solving through podcastingThe nature of your showCTAWrite down “I’m capable of succeeding in Podcasting because ____”When and if I’m stuck I will _____Everytime I feel a doubt or insecurity I will remember that _______ Resources Mentioned:One Funnel Away Challenge - ClickFunnels http://www.podcastbyfriday.com/ofachallengeNote: *some of the links above are affiliate links. Podcast By Friday is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are not given any free products, services or anything else in exchange for mentioning them on our site. The only consideration is in the form of affiliate commissions.Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comWebsites MentionedForbes Magazine https://www.forbes.com/sites/forbesagencycouncil/2017/05/17/websites-as-we-know-them-are-dead/#7f8b50e63d38Entrepreneur On Fire https://www.eofire.com/One Funnel Away Challenge http://www.podcastbyfriday.com/ofachallengeWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburnerWP Profit Builder http://www.podcastbyfriday.com/builder SHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29http://www.podcastbyfriday.com/30 LEAVING A REVIEW & RATING ON iTunesHow to leave a review on iTunesGo to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click View in iTunes.Click on ratings and reviews in iTunesClick the Write a Review buttonLeave an honest rating. Then write a review Just a few words.

PBF54: 7 Secrets To Go From Blogging To PodcastingBy Bill Griggs and Kingsley Grant 7 Secrets To Go From Blogging To PodcastingSecret #1: Know whyWhy are you doing it?MobilityEasy accessReach an audience that doesn’t like to read - consume contentSecret #2: It’s possibleNot as complicated as you might thinkDIY for budgeting reasonsResources:Otter.aiVAsOutsourcingSecret #3: Get used to speaking out loudThoughts get disentangled through the lips and the fingertipsFinding your voiceAttend a Toastmasters GroupSecret #4: Sound better than you thinkYou’re so used to your voice it seems terribleSecret #5: Overcome false beliefsI’m not a speakerNo one will listen to meI don’t know how to operate technologyI don’t have to sound like NPRSecret #6: Good enough - release itDone is better than perfectSecret #7: Your WhatWhat difference will this make that blogging may not be able to fulfill?What problem you’re solving through podcastingThe nature of your showCTAWrite down “I’m capable of succeeding in Podcasting because ____”When and if I’m stuck I will _____Everytime I feel a doubt or insecurity I will remember that _______ Resources Mentioned:One Funnel Away Challenge - ClickFunnels http://www.podcastbyfriday.com/ofachallengeNote: *some of the links above are affiliate links. Podcast By Friday is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are not given any free products, services or anything else in exchange for mentioning them on our site. The only consideration is in the form of affiliate commissions.Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comWebsites MentionedForbes Magazine https://www.forbes.com/sites/forbesagencycouncil/2017/05/17/websites-as-we-know-them-are-dead/#7f8b50e63d38Entrepreneur On Fire https://www.eofire.com/One Funnel Away Challenge http://www.podcastbyfriday.com/ofachallengeWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburnerWP Profit Builder http://www.podcastbyfriday.com/builder SHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29http://www.podcastbyfriday.com/30 LEAVING A REVIEW & RATING ON iTunesHow to leave a review on iTunesGo to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click View in iTunes.Click on ratings and reviews in iTunesClick the Write a Review buttonLeave an honest rating. Then write a review Just a few words.

PBF53: Are Web Pages Dead?By Bill Griggs and Kingsley GrantPodcast By Friday Episode 53:Are Web Pages Dead?I heard someone say that web pages are dead for internet marketing. They said that SEO did not work reliably and that direct marketing and paid advertising was a better, more effective way to get leads and customers for your podcast and products.In a recent article in Forbes Magazine they stated that Websites as we know them are dead. Not because websites do not work but because people are using websites differently than they were originally designed. Consumers have evolved in their buying habits and so should the way we think about browser based content. So how will this effect your podcast web page? In this episode Bill Griggs and Kingsley Grant share their experiences with the ClickFunnels One Funnel Away Challenge. Both Bill and Kingsley are taking a 30 day intensive training on how to build web based sale funnels using ClickFunnels. The OFA Challenge helps bloggers, podcasters, content creators and e-commerce sites set up a sales funnel to market their products and grow their audiences without needing to be a programmer. What did we learn? What was a big surprise? What have we been doing wrong? We share all our thoughts and experiences in the challenge. We talked about some of these principals in Episode 52. We provided the links so you can take a peek at what we have done so far.When you model a proven, successful framework you can have rapid success.Resources Mentioned:One Funnel Away Challenge - ClickFunnels http://www.podcastbyfriday.com/ofachallengeNote: *some of the links above are affiliate links. Podcast By Friday is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are not given any free products, services or anything else in exchange for mentioning them on our site. The only consideration is in the form of affiliate commissions.Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comWebsites MentionedForbes Magazine https://www.forbes.com/sites/forbesagencycouncil/2017/05/17/websites-as-we-know-them-are-dead/#7f8b50e63d38One Funnel Away Challenge http://www.podcastbyfriday.com/ofachallengeEntrepreneur On Fire https://www.eofire.com/Smart Passive Income https://www.smartpassiveincome.com/WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Podcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comSHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/30

PBF53: Are Web Pages Dead?By Bill Griggs and Kingsley GrantPodcast By Friday Episode 53:Are Web Pages Dead?I heard someone say that web pages are dead for internet marketing. They said that SEO did not work reliably and that direct marketing and paid advertising was a better, more effective way to get leads and customers for your podcast and products.In a recent article in Forbes Magazine they stated that Websites as we know them are dead. Not because websites do not work but because people are using websites differently than they were originally designed. Consumers have evolved in their buying habits and so should the way we think about browser based content. So how will this effect your podcast web page? In this episode Bill Griggs and Kingsley Grant share their experiences with the ClickFunnels One Funnel Away Challenge. Both Bill and Kingsley are taking a 30 day intensive training on how to build web based sale funnels using ClickFunnels. The OFA Challenge helps bloggers, podcasters, content creators and e-commerce sites set up a sales funnel to market their products and grow their audiences without needing to be a programmer. What did we learn? What was a big surprise? What have we been doing wrong? We share all our thoughts and experiences in the challenge. We talked about some of these principals in Episode 52. We provided the links so you can take a peek at what we have done so far.When you model a proven, successful framework you can have rapid success.Resources Mentioned:One Funnel Away Challenge - ClickFunnels http://www.podcastbyfriday.com/ofachallengeNote: *some of the links above are affiliate links. Podcast By Friday is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are not given any free products, services or anything else in exchange for mentioning them on our site. The only consideration is in the form of affiliate commissions.Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comWebsites MentionedForbes Magazine https://www.forbes.com/sites/forbesagencycouncil/2017/05/17/websites-as-we-know-them-are-dead/#7f8b50e63d38One Funnel Away Challenge http://www.podcastbyfriday.com/ofachallengeEntrepreneur On Fire https://www.eofire.com/Smart Passive Income https://www.smartpassiveincome.com/WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Podcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comSHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/30

CNCRT62: 30 Days Could Change Your LifeCNC Router Tips Podcast Episode 62Change doesn't have to take a long time. Bold action can be a shortcut to success. In this episode Bill Griggs explains how 30 Days Could Change Your Life. Bill just recently completed the ClickFunnels One Funnel Away Challenge. The OFA Challenge is a 30 day intensive training program that teaches you how to set up a Sales Funnel for your business. The One Funnel Away Challenge course teaches you the belief system you need to be successful at starting an online business. It also teaches the systems, format and copy needed to tell your story in a way your customers will understand. BIll Griggs and Kingsley Grant will be taking the challenge together with members of the audience who want to take their business to the next level with sales funnels. Why not take the Challenge with us?If you would like to train with us and take the One Funnel Away Challenge you can join us at http://www.cncroutertips.com/ofachallenge. Bill Griggs contact info:Twitter: @BillGriggsWebsite: http://www.cncroutertips.comSHOW NOTES: http://cncroutertips.com/62Facebook LIve https://www.facebook.com/cncroutertips/videos/263559501017533/WEBSITES MENTIONEDDisclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.One Funnel Away Challenge http://www.cncroutertips.com/ofachallengePodcast By Friday http://www.podcastbyfriday.comThe Makers Guide http://themakersguide.com#CNC Router Tips https://www.facebook.com/groups/cncroutertipsMach3 Software http://www.themakersguide.com/home/products/mach3CNC Starter Bit set http://cncroutertips.com/bitsCNC Zone http://www.cnczone.comVCarve Demo Video http://cncroutertips.com/demoVCarve Software http://themakersguide.com/vcarve8Triple Edge Finder http://themakersguide.comMaker Masters http://makermasters.comResources http://cncroutertips.com/resourcesYoutube https://www.youtube.com/user/bgriggstwcny Microphones http://podcastbyfriday.com/micsLeaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click "View in iTunes"Next Click on ratings and reviews in iTunesClick the "Write a Review" buttonLeave an honest rating and write a review.

CNCRT62: 30 Days Could Change Your LifeCNC Router Tips Podcast Episode 62Change doesn't have to take a long time. Bold action can be a shortcut to success. In this episode Bill Griggs explains how 30 Days Could Change Your Life. Bill just recently completed the ClickFunnels One Funnel Away Challenge. The OFA Challenge is a 30 day intensive training program that teaches you how to set up a Sales Funnel for your business. The One Funnel Away Challenge course teaches you the belief system you need to be successful at starting an online business. It also teaches the systems, format and copy needed to tell your story in a way your customers will understand. BIll Griggs and Kingsley Grant will be taking the challenge together with members of the audience who want to take their business to the next level with sales funnels. Why not take the Challenge with us?If you would like to train with us and take the One Funnel Away Challenge you can join us at http://www.cncroutertips.com/ofachallenge. Bill Griggs contact info:Twitter: @BillGriggsWebsite: http://www.cncroutertips.comSHOW NOTES: http://cncroutertips.com/62Facebook LIve https://www.facebook.com/cncroutertips/videos/263559501017533/WEBSITES MENTIONEDDisclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.One Funnel Away Challenge http://www.cncroutertips.com/ofachallengePodcast By Friday http://www.podcastbyfriday.comThe Makers Guide http://themakersguide.com#CNC Router Tips https://www.facebook.com/groups/cncroutertipsMach3 Software http://www.themakersguide.com/home/products/mach3CNC Starter Bit set http://cncroutertips.com/bitsCNC Zone http://www.cnczone.comVCarve Demo Video http://cncroutertips.com/demoVCarve Software http://themakersguide.com/vcarve8Triple Edge Finder http://themakersguide.comMaker Masters http://makermasters.comResources http://cncroutertips.com/resourcesYoutube https://www.youtube.com/user/bgriggstwcny Microphones http://podcastbyfriday.com/micsLeaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click "View in iTunes"Next Click on ratings and reviews in iTunesClick the "Write a Review" buttonLeave an honest rating and write a review.

PBF52: Get Faster Results with A ChallengeBy Bill Griggs and Kingsley GrantPodcast By Friday Episode 52:How to get the result you want faster with a challenge?Have you ever been a part of a challenge? What was your experience?We've been in several different kinds of challenges and have experienced great results.Toward the end of last year, Kingsley and his wife were involved in a 10-Day Green Smoothie challenge where they both lost a combined total of 18 pounds in 10 days. Kingsley said, what made this challenge successful for both of them was the community inside the Challenge. The results speak for itself. Imagine losing that many pounds in 10 days!Imagine if you took the same approach with your podcast. We know that you could get your podcast up and running with the support of a community. When you model a proven, successful framework you can have rapid success.In this episode, you'll hear how Bill is following these same suggestions and his experience so far with the One Funnel Away Challenge. The OFA Challenge helps bloggers, podcasters, content creators and e-commerce site set up a sales funnel to market their products and grow their audiences without needing to be a programmer. Many of our favorite bloggers have used the training in the Challenge to launched their podcast. Some have experienced massive success. We talked about some of these podcasters in Episode 51. We provided the links so you can take a peek at what they have done.Resources Mentioned:One Funnel Away Challenge - ClickFunnels http://www.podcastbyfriday.com/ofachallengeNote: *some of the links above are affiliate links. Podcast By Friday is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are not given any free products, services or anything else in exchange for mentioning them on our site. The only consideration is in the form of affiliate commissions.Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.com Websites MentionedOne Funnel Away Challenge http://www.podcastbyfriday.com/ofachallengeIntensely Positive Podcast https://www.intenselypositive.com/Entrepreneur On Fire https://www.eofire.com/Smart Passive Income https://www.smartpassiveincome.com/WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Podcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comSHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/30

PBF52: Get Faster Results with A ChallengeBy Bill Griggs and Kingsley GrantPodcast By Friday Episode 52:How to get the result you want faster with a challenge?Have you ever been a part of a challenge? What was your experience?We've been in several different kinds of challenges and have experienced great results.Toward the end of last year, Kingsley and his wife were involved in a 10-Day Green Smoothie challenge where they both lost a combined total of 18 pounds in 10 days. Kingsley said, what made this challenge successful for both of them was the community inside the Challenge. The results speak for itself. Imagine losing that many pounds in 10 days!Imagine if you took the same approach with your podcast. We know that you could get your podcast up and running with the support of a community. When you model a proven, successful framework you can have rapid success.In this episode, you'll hear how Bill is following these same suggestions and his experience so far with the One Funnel Away Challenge. The OFA Challenge helps bloggers, podcasters, content creators and e-commerce site set up a sales funnel to market their products and grow their audiences without needing to be a programmer. Many of our favorite bloggers have used the training in the Challenge to launched their podcast. Some have experienced massive success. We talked about some of these podcasters in Episode 51. We provided the links so you can take a peek at what they have done.Resources Mentioned:One Funnel Away Challenge - ClickFunnels http://www.podcastbyfriday.com/ofachallengeNote: *some of the links above are affiliate links. Podcast By Friday is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are not given any free products, services or anything else in exchange for mentioning them on our site. The only consideration is in the form of affiliate commissions.Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.com Websites MentionedOne Funnel Away Challenge http://www.podcastbyfriday.com/ofachallengeIntensely Positive Podcast https://www.intenselypositive.com/Entrepreneur On Fire https://www.eofire.com/Smart Passive Income https://www.smartpassiveincome.com/WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Podcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comSHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/30

PBF51: Should You Turn Your Blog Into A PodcastBy Bill Griggs and Kingsley GrantPodcast By Friday Episode 51:How to turn your blog into Podcast?Turning your blog into a podcast is one of the fastest ways to grow your audience. People have less time for reading. Folks are spending less time reading and more time listening to audio or watching videos. Turning your blog into a Podcast can not only increase your audience but also increase your influence and perhaps monetize your work. A podcast can be a more efficient use of your resources. It allows you to speak with authority and in a manner that allows your audience hears your voice. A blog doesn’t allow that.Many bloggers have successfully made the transition to a podcast including: Pat Flynn - Smart Passive Income Podcast https://www.smartpassiveincome.com/podcasts/Michael Stelzner - Social Media Examiner https://www.socialmediaexaminer.com/Amy Porterfield - Online Marketing Made Easy https://www.amyporterfield.com/amy-porterfield-podcast/Leslie Samuel - Become A Blogger https://www.becomeablogger.com/Tony Robbins - Tony Robbins Podcast https://www.tonyrobbins.com/podcasts/Ray Edwards - The Ray Edwards Show https://rayedwards.com/podcast-archives/Michael Hyatt - Lead To Win Podcast https://michaelhyatt.com/leadtowin/Articles Mentioned:Top Income Earning Blogshttps://www.forbes.com/sites/robertadams/2017/03/02/top-income-earning-blogs/#7dad1992377eLinks: The Power of Broke by Damon John https://amzn.to/2SkdOIOCrush it Gary- Vaynerchuk https://amzn.to/2DMLBlPPlatform by Michael Hyatt https://amzn.to/2TpCGwe*some of the links above are affiliate links. Podcast By Friday is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are not given any free products, services or any thing else in exchange for mentioning them on our site. The only consideration is in the form of affiliate commissions. Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comSHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/30Websites Mentioned*some of the links above are affiliate links.WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburnerHow to leave a review on iTunesGo to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click View in iTunes.Click on ratings and reviews in iTunesClick the Write a Review buttonLeave an honest rating. Then write a review Just a few words.

Part 1 - Rock's pioneering singer songwriter is remembered by those whose lives he changed. Featuring John Goldrosen author of The Buddy Holly Story, preservationist Bill Griggs, plus musicians Bobby Vee, Bobby Goldsboro and Scott Turner. Includes Holly radio interview from 1959.

PBF51: Should You Turn Your Blog Into A PodcastBy Bill Griggs and Kingsley GrantPodcast By Friday Episode 51:How to turn your blog into Podcast?Turning your blog into a podcast is one of the fastest ways to grow your audience. People have less time for reading. Folks are spending less time reading and more time listening to audio or watching videos. Turning your blog into a Podcast can not only increase your audience but also increase your influence and perhaps monetize your work. A podcast can be a more efficient use of your resources. It allows you to speak with authority and in a manner that allows your audience hears your voice. A blog doesn’t allow that.Many bloggers have successfully made the transition to a podcast including: Pat Flynn - Smart Passive Income Podcast https://www.smartpassiveincome.com/podcasts/Michael Stelzner - Social Media Examiner https://www.socialmediaexaminer.com/Amy Porterfield - Online Marketing Made Easy https://www.amyporterfield.com/amy-porterfield-podcast/Leslie Samuel - Become A Blogger https://www.becomeablogger.com/Tony Robbins - Tony Robbins Podcast https://www.tonyrobbins.com/podcasts/Ray Edwards - The Ray Edwards Show https://rayedwards.com/podcast-archives/Michael Hyatt - Lead To Win Podcast https://michaelhyatt.com/leadtowin/Articles Mentioned:Top Income Earning Blogshttps://www.forbes.com/sites/robertadams/2017/03/02/top-income-earning-blogs/#7dad1992377eLinks: The Power of Broke by Damon John https://amzn.to/2SkdOIOCrush it Gary- Vaynerchuk https://amzn.to/2DMLBlPPlatform by Michael Hyatt https://amzn.to/2TpCGwe*some of the links above are affiliate links. Podcast By Friday is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We are not given any free products, services or any thing else in exchange for mentioning them on our site. The only consideration is in the form of affiliate commissions. Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comSHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/30Websites Mentioned*some of the links above are affiliate links.WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburnerHow to leave a review on iTunesGo to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click View in iTunes.Click on ratings and reviews in iTunesClick the Write a Review buttonLeave an honest rating. Then write a review Just a few words.

PBF50: Take Time To Know Your AudienceBy Bill Griggs and Kingsley GrantPodcast By Friday Episode 50: If you have been around the content creation space for any time, like me, you have heard people talking about knowing your audience or your avatar or your ideal person.One of the reasons that so many people talk or write about this topic is that it is critical for your overall success in business whether it's online or offline.When you don't know who it is you are creating content for it can be frustrating as you get to a point wondering who is reading, listening to, or purchasing your "stuff."In this episode, we discuss this very idea and share some behind the scenes frustration we experience ourselves and the decision we made.✅ Here is a summary of what we discussed in this episode:➡ Identifying your audience Even when you thought you didPivoting when you realize you are "shooting wildly in the air"➡ Finding your audienceIt's one thing to know who your audience is, it's quite another finding out where they areThey might be closer than you thinkStart with yourself and your interests➡ Make the hard decision and not be ashamedChanging course or tweaking what you're doing has to be embracedYou rarely end up how you startedDon't continue just to save face➡ Your Turn:Let us know what your experience was ...share with us in the facebook group*some of the links above are affiliate linksPodcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comSHOW NOTES Mentioned:On The Ledge http://www.spreaker.com/user/billgriggs/episode-pilothttp://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/36http://www.podcastbyfriday.com/35http://www.podcastbyfriday.com/37http://www.podcastbyfriday.com/38http://www.podcastbyfriday.com/39 Websites MentionedNext 7 Days Challenge http://www.podcastbyfriday.comED DALE Challenge https://yourfirstdollar.com/Google Online Challenge https://www.google.com/onlinechallenge/WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburner How to leave a review on iTunesGo to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click View in iTunes.Click on ratings and reviews in iTunesClick the Write a Review buttonLeave an honest rating. Then write a review Just a few words.

PBF50: Take Time To Know Your AudienceBy Bill Griggs and Kingsley GrantPodcast By Friday Episode 50: If you have been around the content creation space for any time, like me, you have heard people talking about knowing your audience or your avatar or your ideal person.One of the reasons that so many people talk or write about this topic is that it is critical for your overall success in business whether it's online or offline.When you don't know who it is you are creating content for it can be frustrating as you get to a point wondering who is reading, listening to, or purchasing your "stuff."In this episode, we discuss this very idea and share some behind the scenes frustration we experience ourselves and the decision we made.✅ Here is a summary of what we discussed in this episode:➡ Identifying your audience Even when you thought you didPivoting when you realize you are "shooting wildly in the air"➡ Finding your audienceIt's one thing to know who your audience is, it's quite another finding out where they areThey might be closer than you thinkStart with yourself and your interests➡ Make the hard decision and not be ashamedChanging course or tweaking what you're doing has to be embracedYou rarely end up how you startedDon't continue just to save face➡ Your Turn:Let us know what your experience was ...share with us in the facebook group*some of the links above are affiliate linksPodcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comSHOW NOTES Mentioned:On The Ledge http://www.spreaker.com/user/billgriggs/episode-pilothttp://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/36http://www.podcastbyfriday.com/35http://www.podcastbyfriday.com/37http://www.podcastbyfriday.com/38http://www.podcastbyfriday.com/39 Websites MentionedNext 7 Days Challenge http://www.podcastbyfriday.comED DALE Challenge https://yourfirstdollar.com/Google Online Challenge https://www.google.com/onlinechallenge/WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburner How to leave a review on iTunesGo to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click View in iTunes.Click on ratings and reviews in iTunesClick the Write a Review buttonLeave an honest rating. Then write a review Just a few words.

PBF49: The Power Of Influencers To Grow Your AudienceBy Bill Griggs and Kingsley GrantPodcast By Friday Episode 49: Sometimes meeting an influencer in your niche can be like pouring gasoline on a fire. The Power of Influencers can accelerate how you grow your audience. In this episode our host Bill Griggs and Kingsley Grant discuss influence and how the connections and relationships your make with influential people can help to grow your audience. Websters dictionary defines Influence as:the act or power of producing an effect without apparent exertion of force or direct exercise of commandthe power or capacity of causing an effect in indirect or intangible ways Why?Gain a level of influence through associationsTo create momentumLead to change/transformationGet results that was not foreseen initiallyHaving impact How? Connect with someone who in our eyes is an influencerJoint venturesSharing the stage/platform (interview/guest)Share contentHelp them achieve more of what they wantZig Ziglar’s Quote: "You can have everything in life you want, if you will just help other people get what they want." - Zig ZiglarReference them in your show, articles, SM, etc. When do you begin to leverage this relationship?As soon as we canAt eventsUpon invitation (don’t impose, assume …)*some of the links above are affiliate linksPodcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comSHOW NOTES Mentioned:On The Ledge http://www.spreaker.com/user/billgriggs/episode-pilothttp://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/36http://www.podcastbyfriday.com/35http://www.podcastbyfriday.com/37http://www.podcastbyfriday.com/38http://www.podcastbyfriday.com/39 Websites MentionedNext 7 Days Challenge http://www.podcastbyfriday.comED DALE Challenge https://yourfirstdollar.com/Google Online Challenge https://www.google.com/onlinechallenge/WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburner

PBF49: The Power Of Influencers To Grow Your AudienceBy Bill Griggs and Kingsley GrantPodcast By Friday Episode 49: Sometimes meeting an influencer in your niche can be like pouring gasoline on a fire. The Power of Influencers can accelerate how you grow your audience. In this episode our host Bill Griggs and Kingsley Grant discuss influence and how the connections and relationships your make with influential people can help to grow your audience. Websters dictionary defines Influence as:the act or power of producing an effect without apparent exertion of force or direct exercise of commandthe power or capacity of causing an effect in indirect or intangible ways Why?Gain a level of influence through associationsTo create momentumLead to change/transformationGet results that was not foreseen initiallyHaving impact How? Connect with someone who in our eyes is an influencerJoint venturesSharing the stage/platform (interview/guest)Share contentHelp them achieve more of what they wantZig Ziglar’s Quote: "You can have everything in life you want, if you will just help other people get what they want." - Zig ZiglarReference them in your show, articles, SM, etc. When do you begin to leverage this relationship?As soon as we canAt eventsUpon invitation (don’t impose, assume …)*some of the links above are affiliate linksPodcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard. Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comSHOW NOTES Mentioned:On The Ledge http://www.spreaker.com/user/billgriggs/episode-pilothttp://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/36http://www.podcastbyfriday.com/35http://www.podcastbyfriday.com/37http://www.podcastbyfriday.com/38http://www.podcastbyfriday.com/39 Websites MentionedNext 7 Days Challenge http://www.podcastbyfriday.comED DALE Challenge https://yourfirstdollar.com/Google Online Challenge https://www.google.com/onlinechallenge/WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburner

CNCRT61: CNC Automation with Mike GencarelliCNC Router Tips Podcast Episode 61IN this episode we talk with my friend Mike Gencarelli about CNC automation. Mike Gencarelli is an experienced tool maker, automation expert, software developer and has probably one of the most interesting garage workshops. Gencarelli writes about his adventures on his website https://mygarageshop.com/ where he displays his projects and talks about his machine shop which includes everything from CNC Router Table, Plasma cutter to milling machine. Mike has built quite a wide variety of automated machines in his past. His work on an automated parachute harness sewing machine got him noticed Later he began work on a plasma table with a dual chamber water table and a removable 4th axis.Mike Gencarelli decided that he wanted to automate some common CNC options to make them work better with Mach3. He developed software which allowed him to use multiple wifi relays to turn his equipment off and on. He hooked up his duct collection system, lights and water pumps to his SmartScreens Interface for Mach3 . SmartSreens for Mach3 integrates the control of simple to add Expansion Relays and Smart Wi-Fi Devices which can be controlled by SmartScreens through Mach3 via buttons on the screen, and MCodes in the GCode.Bill Griggs contact info:Twitter: @BillGriggsWebsite: http://www.cncroutertips.comSHOW NOTES: http://cncroutertips.com/60Facebook LIve https://www.facebook.com/cncroutertips/videos/263559501017533/WEBSITES MENTIONEDDisclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.SmartScreens https://ngeneyes.com/smartscreen/licensing/My Garage Shop https://mygarageshop.com/SmartScreens For Mach3 Triple Edge Finder https://www.youtube.com/watch?v=FUlXikOPHbwTowbot http://towbot.comVelox http://velox.comVideo tour of My Garage Shop https://www.youtube.com/watch?v=kSltNI0Gi7oStudents Make a CNC Router Table https://www.youtube.com/watch?v=H_SFnWiSWiwThe Makers Guide http://themakersguide.com#CNC Router Tips https://www.facebook.com/groups/cncroutertipsMach3 Software http://www.themakersguide.com/home/products/mach3CNC Starter Bit set http://cncroutertips.com/bitsCNC Zone http://www.cnczone.comVCarve Demo Video http://cncroutertips.com/demoVCarve Software http://themakersguide.com/vcarve8Triple Edge Finder http://themakersguide.comMaker Masters http://makermasters.comResources http://cncroutertips.com/resourcesYoutube https://www.youtube.com/user/bgriggstwcny OBS Studio https://obsproject.com/Smove Mobile http://smove.comMastercam https://www.mastercam.com/en-us/Stepcraft https://www.stepcraft.us/qMicrophones http://podcastbyfriday.com/micsLeaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click "View in iTunes"Next Click on ratings and reviews in iTunesClick the "Write a Review" buttonLeave an honest rating and write a review.

CNCRT61: CNC Automation with Mike GencarelliCNC Router Tips Podcast Episode 61IN this episode we talk with my friend Mike Gencarelli about CNC automation. Mike Gencarelli is an experienced tool maker, automation expert, software developer and has probably one of the most interesting garage workshops. Gencarelli writes about his adventures on his website https://mygarageshop.com/ where he displays his projects and talks about his machine shop which includes everything from CNC Router Table, Plasma cutter to milling machine. Mike has built quite a wide variety of automated machines in his past. His work on an automated parachute harness sewing machine got him noticed Later he began work on a plasma table with a dual chamber water table and a removable 4th axis.Mike Gencarelli decided that he wanted to automate some common CNC options to make them work better with Mach3. He developed software which allowed him to use multiple wifi relays to turn his equipment off and on. He hooked up his duct collection system, lights and water pumps to his SmartScreens Interface for Mach3 . SmartSreens for Mach3 integrates the control of simple to add Expansion Relays and Smart Wi-Fi Devices which can be controlled by SmartScreens through Mach3 via buttons on the screen, and MCodes in the GCode.Bill Griggs contact info:Twitter: @BillGriggsWebsite: http://www.cncroutertips.comSHOW NOTES: http://cncroutertips.com/60Facebook LIve https://www.facebook.com/cncroutertips/videos/263559501017533/WEBSITES MENTIONEDDisclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.SmartScreens https://ngeneyes.com/smartscreen/licensing/My Garage Shop https://mygarageshop.com/SmartScreens For Mach3 Triple Edge Finder https://www.youtube.com/watch?v=FUlXikOPHbwTowbot http://towbot.comVelox http://velox.comVideo tour of My Garage Shop https://www.youtube.com/watch?v=kSltNI0Gi7oStudents Make a CNC Router Table https://www.youtube.com/watch?v=H_SFnWiSWiwThe Makers Guide http://themakersguide.com#CNC Router Tips https://www.facebook.com/groups/cncroutertipsMach3 Software http://www.themakersguide.com/home/products/mach3CNC Starter Bit set http://cncroutertips.com/bitsCNC Zone http://www.cnczone.comVCarve Demo Video http://cncroutertips.com/demoVCarve Software http://themakersguide.com/vcarve8Triple Edge Finder http://themakersguide.comMaker Masters http://makermasters.comResources http://cncroutertips.com/resourcesYoutube https://www.youtube.com/user/bgriggstwcny OBS Studio https://obsproject.com/Smove Mobile http://smove.comMastercam https://www.mastercam.com/en-us/Stepcraft https://www.stepcraft.us/qMicrophones http://podcastbyfriday.com/micsLeaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click "View in iTunes"Next Click on ratings and reviews in iTunesClick the "Write a Review" buttonLeave an honest rating and write a review.

CNCRT60: CNC Router Tips Podcast On Face Book LiveCNC Router Tips Podcast Episode 60For the 60th episode of the CNC RouterTips Podcast we broadcast on Facebook Live. This is the first video episode of the podcast and we hope to add more video episodes in the future. Broadcasting the CNC Router Tips Podcast on Facebook Live should reach a broader audience of CNC enthusiast who might not already be podcast listeners. Bill Griggs discusses what he has been up to in CNC over the summer and what he has planned for the winter. Bill talked about his trips to the Podcast Movement Conference, MasterCam Education Summit and a field trip to Stepcraft US. Then BIll discussed a bit of new equipment he got for creating podcast and video content. For video we look at the new SMOVE Mobile extendable smartphone stabilizer. This camera gimbal shoul make better quality shop videos without jitters. Bill also discusses how he used OBS studio to create his Facebook Live Video. OBS Studio is an open Source broadcasting platform that is rapidly gaining popularity. On the audio side of things, Bill Griggs talked about 3 amazing microphone you can use for all your podcasting and video recording without breaking the back. In fact all 3 of the mics discussed can be bought for around $110 total. For more information and an in depth examination of these mic check out Podcast By Friday Episode 39 with Bill Griggs and Kingsley Grant. http://www.podcastbyfriday.com/39.Lastly in this episode we talk about BIll's new products and his soon to be released ebook. Bill Griggs contact info:Twitter: @BillGriggsWebsite: http://www.cncroutertips.comSHOW NOTES: http://cncroutertips.com/60Facebook LIve https://www.facebook.com/cncroutertips/videos/263559501017533/WEBSITES MENTIONEDDisclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.The Makers Guide http://themakersguide.com#CNC Router Tips https://www.facebook.com/groups/cncroutertipsMach3 Software http://www.themakersguide.com/home/products/mach3CNC Starter Bit set http://cncroutertips.com/bitsCNC Zone http://www.cnczone.comVCarve Demo Video http://cncroutertips.com/demoVCarve Software http://themakersguide.com/vcarve8Triple Edge Finder http://themakersguide.comMaker Masters http://makermasters.comResources http://cncroutertips.com/resourcesYoutube https://www.youtube.com/user/bgriggstwcny OBS Studio https://obsproject.com/Smove Mobile http://smove.comMastercam https://www.mastercam.com/en-us/Stepcraft https://www.stepcraft.us/qMicrophones http://podcastbyfriday.com/micsLeaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click "View in iTunes"Next Click on ratings and reviews in iTunesClick the "Write a Review" buttonLeave an honest rating and write a review.

CNCRT60: CNC Router Tips Podcast On Face Book LiveCNC Router Tips Podcast Episode 60For the 60th episode of the CNC RouterTips Podcast we broadcast on Facebook Live. This is the first video episode of the podcast and we hope to add more video episodes in the future. Broadcasting the CNC Router Tips Podcast on Facebook Live should reach a broader audience of CNC enthusiast who might not already be podcast listeners. Bill Griggs discusses what he has been up to in CNC over the summer and what he has planned for the winter. Bill talked about his trips to the Podcast Movement Conference, MasterCam Education Summit and a field trip to Stepcraft US. Then BIll discussed a bit of new equipment he got for creating podcast and video content. For video we look at the new SMOVE Mobile extendable smartphone stabilizer. This camera gimbal shoul make better quality shop videos without jitters. Bill also discusses how he used OBS studio to create his Facebook Live Video. OBS Studio is an open Source broadcasting platform that is rapidly gaining popularity. On the audio side of things, Bill Griggs talked about 3 amazing microphone you can use for all your podcasting and video recording without breaking the back. In fact all 3 of the mics discussed can be bought for around $110 total. For more information and an in depth examination of these mic check out Podcast By Friday Episode 39 with Bill Griggs and Kingsley Grant. http://www.podcastbyfriday.com/39.Lastly in this episode we talk about BIll's new products and his soon to be released ebook. Bill Griggs contact info:Twitter: @BillGriggsWebsite: http://www.cncroutertips.comSHOW NOTES: http://cncroutertips.com/60Facebook LIve https://www.facebook.com/cncroutertips/videos/263559501017533/WEBSITES MENTIONEDDisclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.The Makers Guide http://themakersguide.com#CNC Router Tips https://www.facebook.com/groups/cncroutertipsMach3 Software http://www.themakersguide.com/home/products/mach3CNC Starter Bit set http://cncroutertips.com/bitsCNC Zone http://www.cnczone.comVCarve Demo Video http://cncroutertips.com/demoVCarve Software http://themakersguide.com/vcarve8Triple Edge Finder http://themakersguide.comMaker Masters http://makermasters.comResources http://cncroutertips.com/resourcesYoutube https://www.youtube.com/user/bgriggstwcny OBS Studio https://obsproject.com/Smove Mobile http://smove.comMastercam https://www.mastercam.com/en-us/Stepcraft https://www.stepcraft.us/qMicrophones http://podcastbyfriday.com/micsLeaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click "View in iTunes"Next Click on ratings and reviews in iTunesClick the "Write a Review" buttonLeave an honest rating and write a review.

Episode 48: Meeting With Your Audience MembersWhy meet with our audience members?Personal touchBuild relationshipsGet feedbackShare ideasInterview member for a guest appearance for a future episodeHow do we set up these meetings?Through podcast announcementsThrough facebook groupEventbriteIn partnership with an event coordinator/hostWhere to set up meetings?In a lobbyAt a restaurant/barAt a conference roomSome place funWhen to set up meetings?Not at the last minuteAt least 3 to 4 weeks outCall To Action: Meet with you at Podcast MovementGo to our Eventbrite Page to register … letting us know your intentionhttp://eventbrite.comhttp://facebook.com*some of the links above are affiliate linksPodcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard.Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comSHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/36http://www.podcastbyfriday.com/35http://www.podcastbyfriday.com/37http://www.podcastbyfriday.com/38http://www.podcastbyfriday.com/39Websites MentionedNext 7 Days Challenge http://www.podcastbyfriday.comWP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburnerHow to leave a review on iTunesGo to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click View in iTunes.Click on ratings and reviews in iTunesClick the Write a Review buttonLeave an honest rating. Then write a review Just a few words.

Episode 48: Meeting With Your Audience MembersWhy meet with our audience members?Personal touchBuild relationshipsGet feedbackShare ideasInterview member for a guest appearance for a future episodeHow do we set up these meetings?Through podcast announcementsThrough facebook groupEventbriteIn partnership with an event coordinator/hostWhere to set up meetings?In a lobbyAt a restaurant/barAt a conference roomSome place funWhen to set up meetings?Not at the last minuteAt least 3 to 4 weeks outCall To Action: Meet with you at Podcast MovementGo to our Eventbrite Page to register … letting us know your intentionhttp://eventbrite.comhttp://facebook.com*some of the links above are affiliate linksPodcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard.Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comSHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/36http://www.podcastbyfriday.com/35http://www.podcastbyfriday.com/37http://www.podcastbyfriday.com/38http://www.podcastbyfriday.com/39Websites MentionedNext 7 Days Challenge http://www.podcastbyfriday.comWP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburnerHow to leave a review on iTunesGo to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click View in iTunes.Click on ratings and reviews in iTunesClick the Write a Review buttonLeave an honest rating. Then write a review Just a few words.

Episode 47: Networking at Meetup Groups Near You and AwayWhat is a meetup groups?Online organizing tool used to schedule meetings/events for like minded peopleWhy meetup groups?To meet people face to face who have similar interestsTo rally around a causeTo build membership To learn a new skillTo learn about trends, new ideas, new technology, etc.To build stronger relationshipsTo meet your audienceAllows you to find events within close proximity Where do we find meetup groups?Meetup dot comEventbrite dot comFacebook dot com(Sidenote: Set notification to be reminded of upcoming events)How do we network at a meetup group?Be intentional to meet new peopleProvide valueBe a participator not a spectator ...not a spectator sportListen to Episode 46: Networking at a live event where we cover a number of what to do at these eventsCTA: Now what?Go to Meetup Dot Com and choose an event that is of interest to you and schedule to attendLet us know what your experience was ...share with us in the facebook group

Episode 47: Networking at Meetup Groups Near You and AwayWhat is a meetup groups?Online organizing tool used to schedule meetings/events for like minded peopleWhy meetup groups?To meet people face to face who have similar interestsTo rally around a causeTo build membership To learn a new skillTo learn about trends, new ideas, new technology, etc.To build stronger relationshipsTo meet your audienceAllows you to find events within close proximity Where do we find meetup groups?Meetup dot comEventbrite dot comFacebook dot com(Sidenote: Set notification to be reminded of upcoming events)How do we network at a meetup group?Be intentional to meet new peopleProvide valueBe a participator not a spectator ...not a spectator sportListen to Episode 46: Networking at a live event where we cover a number of what to do at these eventsCTA: Now what?Go to Meetup Dot Com and choose an event that is of interest to you and schedule to attendLet us know what your experience was ...share with us in the facebook group

PBF45: Getting Up Close and Personal: An Interview of Bill Griggs by Kingsley Grant Podcast By Friday Episode 45:✅ In this episode, you'll discover some very telling stories of Bill Griggs, one of the co-hosts of the show. Bill shared behind the scenes insights of his life and covered a broad spectrum of his entrepreneurial journey.Here is a summary of what we discussed in this episode. You'll hear: ➡ Handling failure Changing perspective Reframing experiences➡ Solving a Problem All successful business solves a problem People purchase solutions to their problem➡ Discovering the power of the internet You don't know what you don't know until you know what you didn't know. Creating an E-Commerce site to give customers an easier way to pay for products and/or services Creating content to give value to your regular and potential customers➡ Start small Start with what you can Expand as demand grows Find a way to create another product from queries being made for additional resources➡ Keep the main thing the main thing Family first Making sacrifices in being consistent with your core values➡ CTA...what should you do now? Have someone interview you as a way to get your audience to know you better Post it in the Podcast By Friday Facebook Group✅ PS: The RECOMMENDED MICROPHONE is still available. If you need help choosing the Best microphone for your podcast we can help. We put together a bundle of the 3 best microphones for your Podcast. Just click the Button to see them. *some of the links above are affiliate linksPodcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard.Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comSHOW NOTES Mentioned:On The Ledge http://www.spreaker.com/user/billgriggs/episode-pilothttp://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/36http://www.podcastbyfriday.com/35http://www.podcastbyfriday.com/37http://www.podcastbyfriday.com/38http://www.podcastbyfriday.com/39Websites Mentioned Next 7 Days Challenge http://www.podcastbyfriday.comED DALE Challenge https://yourfirstdollar.com/Google Online Challenge https://www.google.com/onlinechallenge/WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburnerHow to leave a review on iTunesGo to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click View in iTunes.Click on ratings and reviews in iTunesClick the Write a Review buttonLeave an honest rating. Then write a review Just a few words.

PBF45: Getting Up Close and Personal: An Interview of Bill Griggs by Kingsley Grant Podcast By Friday Episode 45:✅ In this episode, you'll discover some very telling stories of Bill Griggs, one of the co-hosts of the show. Bill shared behind the scenes insights of his life and covered a broad spectrum of his entrepreneurial journey.Here is a summary of what we discussed in this episode. You'll hear: ➡ Handling failure Changing perspective Reframing experiences➡ Solving a Problem All successful business solves a problem People purchase solutions to their problem➡ Discovering the power of the internet You don't know what you don't know until you know what you didn't know. Creating an E-Commerce site to give customers an easier way to pay for products and/or services Creating content to give value to your regular and potential customers➡ Start small Start with what you can Expand as demand grows Find a way to create another product from queries being made for additional resources➡ Keep the main thing the main thing Family first Making sacrifices in being consistent with your core values➡ CTA...what should you do now? Have someone interview you as a way to get your audience to know you better Post it in the Podcast By Friday Facebook Group✅ PS: The RECOMMENDED MICROPHONE is still available. If you need help choosing the Best microphone for your podcast we can help. We put together a bundle of the 3 best microphones for your Podcast. Just click the Button to see them. *some of the links above are affiliate linksPodcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard.Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comSHOW NOTES Mentioned:On The Ledge http://www.spreaker.com/user/billgriggs/episode-pilothttp://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22 http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24 http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29 http://www.podcastbyfriday.com/36http://www.podcastbyfriday.com/35http://www.podcastbyfriday.com/37http://www.podcastbyfriday.com/38http://www.podcastbyfriday.com/39Websites Mentioned Next 7 Days Challenge http://www.podcastbyfriday.comED DALE Challenge https://yourfirstdollar.com/Google Online Challenge https://www.google.com/onlinechallenge/WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburnerHow to leave a review on iTunesGo to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click View in iTunes.Click on ratings and reviews in iTunesClick the Write a Review buttonLeave an honest rating. Then write a review Just a few words.

CNCRT59: What Is The Best Way To Learn CNCCNC Router Tips Podcast Episode 59In this episode of the CNC Router Tops Podcast, Bill Griggs answers a listener's question, "What is the best way to learn CNC? This is a very smart question although it may seem simple at first glance. The best way to learn CNC will be the most efficient, quickest and most thorough method. Learning CNC quickly while still getting all the bases covered is a real chore on your own. When you decide to learn CNC you have to have your end goal in mind. A person wishing to learn CNC for a hobby will have different goals and time lines than a person who plans to use CNC to create a business. Focused precise topic are the best way to guarantee your success.Learn what we recommend as the best way to learn CNC for your CNC Router Table and why.Bill Griggs contact info:Twitter: @BillGriggsWebsite: http://www.cncroutertips.comSHOW NOTES: http://cncroutertips.com/59WEBSITES MENTIONEDDisclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.The Makers Guide http://themakersguide.com#CNC Router Tips https://www.facebook.com/groups/cncroutertipsMach3 Software http://www.themakersguide.com/home/products/mach3CNC Starter Bit set http://cncroutertips.com/bitsCNC Zone http://www.cnczone.comTitans Of CNC Academy http://academy.titansofcnc.comVCarve Demo Video http://cncroutertips.com/demoVCarve Software http://themakersguide.com/vcarve8Triple Edge Finder http://themakersguide.comMaker Masters http://makermasters.comResources http://cncroutertips.com/resourcesYoutube https://www.youtube.com/user/bgriggstwcny NYCCNC https://www.nyccnc.com/Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click "View in iTunes"Next Click on ratings and reviews in iTunesClick the "Write a Review" buttonLeave an honest rating and write a review.

CNCRT59: What Is The Best Way To Learn CNCCNC Router Tips Podcast Episode 59In this episode of the CNC Router Tops Podcast, Bill Griggs answers a listener's question, "What is the best way to learn CNC? This is a very smart question although it may seem simple at first glance. The best way to learn CNC will be the most efficient, quickest and most thorough method. Learning CNC quickly while still getting all the bases covered is a real chore on your own. When you decide to learn CNC you have to have your end goal in mind. A person wishing to learn CNC for a hobby will have different goals and time lines than a person who plans to use CNC to create a business. Focused precise topic are the best way to guarantee your success.Learn what we recommend as the best way to learn CNC for your CNC Router Table and why.Bill Griggs contact info:Twitter: @BillGriggsWebsite: http://www.cncroutertips.comSHOW NOTES: http://cncroutertips.com/59WEBSITES MENTIONEDDisclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.The Makers Guide http://themakersguide.com#CNC Router Tips https://www.facebook.com/groups/cncroutertipsMach3 Software http://www.themakersguide.com/home/products/mach3CNC Starter Bit set http://cncroutertips.com/bitsCNC Zone http://www.cnczone.comTitans Of CNC Academy http://academy.titansofcnc.comVCarve Demo Video http://cncroutertips.com/demoVCarve Software http://themakersguide.com/vcarve8Triple Edge Finder http://themakersguide.comMaker Masters http://makermasters.comResources http://cncroutertips.com/resourcesYoutube https://www.youtube.com/user/bgriggstwcny NYCCNC https://www.nyccnc.com/Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click "View in iTunes"Next Click on ratings and reviews in iTunesClick the "Write a Review" buttonLeave an honest rating and write a review.

PBF44: Interview Podcasts: Kingsley GrantThe most common form of Podcast is the interview Podcast. An interview podcast allow you and your audience to get to know your guest and help spread their message. Finding interview sujects can be a challenge for new podcaster host so we recommend you start by interviewing a friend first.In this episode we interview Kingsley Grant, author, coach, counselor and host of multiole podcast about his life and his journey. We talk about his early years in Jamaica and why he decided to come to the US to start a new life. His health challenges and his drive to leave a legacy.We also discuss:Why we do interview podcastWho we should interview firstSmall winsHow we met.Kingsley’s storyCTA… What should you do nowInterview a friend or colleague.SHOW NOTES Mentioned:http://www.podcastbyfriday.com/19http://www.podcastbyfriday.com/20http://www.podcastbyfriday.com/21http://www.podcastbyfriday.com/22http://www.podcastbyfriday.com/23http://www.podcastbyfriday.com/24http://www.podcastbyfriday.com/25http://www.podcastbyfriday.com/26http://www.podcastbyfriday.com/27http://www.podcastbyfriday.com/28http://www.podcastbyfriday.com/29http://www.podcastbyfriday.com/36http://www.podcastbyfriday.com/35http://www.podcastbyfriday.com/37http://www.podcastbyfriday.com/38http://www.podcastbyfriday.com/39Websites MentionedNext 7 Days Challenge http://www.podcastbyfriday.comED DALE Challenge https://yourfirstdollar.com/Google Online Challenge https://www.google.com/onlinechallenge/WP Profit Builder http://www.podcastbyfriday.com/builderWordpress Hosted http://www.wordpress.comWordpress Self Hosted http://wordpress.orgiTunes www.apple.com/itunes/Spreaker http://spreaker.comPodcast By Friday http://www.podcastbyfriday.comCNC Router Tips http://www.cncroutertips.comSmart Passive Income http://smartpassiveincome.comFacebook Group http://facebook.com/groups/podcastbyfridayAmazon Associates https://affiliate-program.amazon.com/homeBluehost http://www.podcastbyfriday.com/bluehostAudible http://www.podcastbyfriday.com/audibleYoutube http://youtube.comVodburner http://www.podcastbyfriday.com/vodburnerCONTACT INFORMATIONPodcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard.Bill Griggs contact info:Twitter: @BillGriggsWebsites: http://podcastbyfriday.comhttp://cncroutertips.comKingsley Grant's Contact info:Twitter:@kingsleygrantWebsite: http://podcastbyfriday.comhttp://startabusinessonlinefromhome.comhttp://kingsleygrant.comHow to leave a review on iTunesGo to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2Click View in iTunes.Click on ratings and reviews in iTunesClick the Write a Review buttonLeave an honest rating. Then write a review Just a few words.