Carboline Tech Service Podcast

Summary  Sulfur, an instrumental commodity to global industry, is a highly corrosive commodity typically shipped via rail in a molten state. Shippers must take care to protect their rolling stock by applying linings that resist heat, chemicals, and impacts. In this episode, rail industry expert Lupe Pavon and tank lining expert Steve Liebhart explore service environment, cleaning/surface preparation, and protective lining principles for rail cars in molten sulfur service. They also relate interesting findings from a field inspection.    And, Steve considers himself a near-perfect driver in the snow, and Lupe reveals his favorite vegetable.    **Timestamps ** 00:00 – Introduction  02:11 – Corrosion mechanisms and failure modes of molten sulfur tank cars  05:36 – A highly stressful service environment for a lining  09:01 – Pitting corrosion and substrate blending for surface preparation  14:12 – Carboline's new Plasite XHT 400 hybrid epoxy lining  18:14 – Eliminating an extra step in the surface preparation process  18:38 – We inspected Plasite XHT 400 in two cars after 30+ months in service  25:27 – The Four Questions

En el episodio inaugural en Español de The Red Bucket, nuestros compañeros de Carboline España Juan Pablo Ortega y Emilie Musso hablan sobre la reciente renovación del icónico Estadio Santiago Bernabéu en Madrid, España. El alcance del proyecto incluyó la aplicación de materiales ignífugos cementosos e intumescentes, así como recubrimientos protectores de alto rendimiento.    00:58 – Introducción: Presentación de Emilie Musso y Juan Pablo Ortega.  02:24 – Renovación del estadio: Alcance del proyecto.  04:21 – Requisitos contra incendios: Normas aplicadas en estadios.  05:47  – Césped retráctil: Impacto en los revestimientos.  07:28 –  Tipos de protección: Uso de mortero y pintura intumescente.  08:55 – Pyrocrete 40: Beneficios y aplicación.  10:20 – Nullifire SC902: Dónde y por qué se usó.  13:55 – Aplicación en una sola capa: Importancia del espesor.  15:58 – Protección anticorrosión: Recubrimientos adicionales.  17:15 – Plazos exigentes: Cómo se cumplió el tiempo.  18:51 – Cierre: Reflexión final sobre el proyecto.  20:45 – Preguntas extra: Toque personal para cerrar el episodio.

It's taken for granted in the corrosion industry that zinc protects steel. But there's more than one way to put zinc on steel and more than one mechanism at work that makes it so protective. Kristen Blankenship returns to The Red Bucket to answer some big questions with even bigger implications:  What's zinc actually doing on painted, galvanized, and metalized surfaces?  How do these corrosion protection methods compare in terms of performance?  Does the standard "zinc-epoxy-urethane" coating system hold zinc-rich primers back from performing as well as they could on their own?  How many ISO 12944-9 testing cycles will it take before any corrosion appears on panels coated in a two-coat inorganic system?  Kristen also contemplates the deathbed of a lonely scientist.  00:00 – Intro  02:13 – A very brief history of cathodic protection  04:05 – Electron chemistry explains behavior  06:15 – Summarizing galvanizing, metalizing, and painting  14:15 – Silicate resin technology is understudied  15:47 – Comparing adhesion of each method  17:09 – Engineers understand paint differently than the other methods  20:16 – Surprising results from cyclic aging testing of a two-coat inorganic system  23:43 – Why is paint held to a higher standard?  26:48 – Zinc loading and a sustainability comparison  Find out more at https://carboline-tech-service-podcast.pinecast.co

Water/wastewater operator customers are asking some strange questions lately. To experts Jeremy Sukola and Eric Zimmerman, it's as if they're asking for magic paint. In this episode, we identify an emerging demographic trend and the knowledge gap it's created. Then, Jeremy and Eric explain why the best ways to close that gap are to have hard conversations early and be involved in educating the next generation. Also, Eric imagines a driving range on the Mayflower and takes a bold stance against eggnog. 0:00 – Introduction 03:08 – Strange questions from customers 05:44 – Understanding capabilities and tackling misconceptions 08:00 – A generation of seasoned professionals is retiring out 10:18 – Part of a familiar trend 12:20 – The influence of project schedule pressure 14:18 – Capabilities of coatings/linings are limited 18:34 – Economic decline brings new contractors into industry 20:04 – Manufacturers as problem solvers and honest brokers 24:11 – Breaking barriers to knowledge sharing 29:35 – Benefits of industry involvement 33:12 – Gaining credibility by saying no 37:57 – Avoid 99% of problems with early collaboration 40:00 – Four questions

Understanding electrostatic dissipative (ESD) vs. conductive floor coatings is one of the industry's most persistently misunderstood topics. In this episode of The Red Bucket, subject matter expert Richie Cropp of Dudick discusses the purpose of these specialty products, provides use cases for each type, and explains the critical importance of seeking the knowledge of material manufacturers.    Also, Richie shares his plans for Black Friday.   00:00 – Intro  02:27 – This topic is misunderstood  04:05 – How static electricity is generated  08:01 – Resistivity ranges  10:01 – Where does the electricity go?  11:48 – Coating fillers carry the current  12:48 – When to apply conductive vs. dissipative floor coatings  15:45 – The same facility might require both types  17:20 – ESD/conductive coating performance vs. general purpose toppings  19:41 – How coating manufacturers help engineers/specifiers  22:00 – Installed cost comparison  23:28 – Four questions  Find out more at https://carboline-tech-service-podcast.pinecast.co

Shortly after the turn of the last century, the cellulosic fire time/temperature curve was developed to assess the performance and safety of building materials and passive fire resistive materials. It was the cutting edge for its time. But, according to Chris Burst, the composition and contents of our built environment today prove its time has run out. Also in the episode, Toby isn't sure he's never seen a ghost, and Chris tells a bad joke. This episode contains references to a three-part article series we recently published about modern fire loads. Read them here: Part 1. Part 2. Part 3. 00:00 – Introduction 01:07 – What we mean by "modern" 05:04 – Old, old standards 06:03 – Proliferation of rechargeable batteries 07:18 – Visualizing time/temperature curves 12:24 – These fires are harder to extinguish 15:24 – Structured parking complicates matters 20:26– Don't blame EVs 22:27– Similarities to tunnel fires 24:35– Leveraging existing alternatives 26:12– Ramifications of adopting code changes 30:53– Modern spaces require modern material safety testing 32:53– The four questions: Spooky Halloween edition Find out more at https://carboline-tech-service-podcast.pinecast.co

Kristen Blankenship discusses whether coatings manufacturers can truly impact product sustainability – minus the greenwashing. Then, we learn whether she sees molecules ‘Queen's Gambit' style. 00:00 – Introduction 02:16 – The purpose of protective coatings  04:27 – When sustainability impacts coatings  08:00 – Addressing pollution as a chemical company 18:47 – Water-based coating claims 32:56 – Where do we go from here? 36:47 – Kristen's four questions  Find out more at https://carboline-tech-service-podcast.pinecast.co

Dan Baribault and Paul Atzemis continue their exploration of the unique technology and wide range of use cases for surface-tolerant epoxy mastics like Carbomastic 15. Then, Paul likens himself to a cross between Rapunzel and Gandalf.  00:00 – Carbomastic 15 performs at high temperatures  01:43 – Summarizing recent Carbomastic 15 use cases  04:00 – Understanding curing shrinkage stress  08:16 – The good (and bad) of slow dry times  10:17 – Importance of low solvent load  12:55 – Dan's weirdest Carbomastic 15 experience  13:58 – Advice to owners/specifiers comparing surface-tolerant epoxy mastics  15:16 – Paul's four questions

Why do some surface-tolerant mastic epoxies work so well in so many different services? Paul Atzemis and Dan Baribault deconstruct Carbomastic 15, explaining why its resin technology and added pigmentation combine to make it one of the industry's best performers. And, Dan imagines a walk along the Lake Pontchartrain Causeway. 00:00 – Introduction 02:19 – How mastic coatings developed 04:39 – Length of carbon chains influence application characteristics 07:29 – Introduction and characteristics of aluminum pigmentation 13:39 – Galvanic protective effects 15:29 – Aluminum pigmentation effect of chalking of epoxy 17:20 – What owners/specifiers need to know 19:15 – The four questions

Inflow & infiltration (I&I) is a serious challenge to water and wastewater infrastructure owners, who usually don't know they have an I&I problem until it's too late. What is I&I? What does it cost? How do you stop it? How does controlling I&I fit into a holistic asset management and maintenance program? Jeremy Sukola and David Dingler of Prime Resins, a division of Carboline, explain. Spoiler: magic in a cup. Want to schedule a demo? Contact Prime Resins here, or Carboline here. 0:00 – Introduction 03:23 – Defining I&I 05:49 – It doesn't only afflict aging infrastructure 08:39 – Calculating the cost of I&I 12:12 – Proactive or reactive? Some owners can only triage 13:46 – Where Prime Resins fits in 16:44 – Owners need to update master specs, and we can help 23:14 – Building up the contractor pool with demos and education 26:40 – The four questions

After some time off the air, The Red Bucket returns with a narration of a complex electric vehicle (EV) facility construction project in Canada, with Jeffrey Lagendyk of Nor-Lag Coatings helping tell the story. The project included applying intumescent fireproofing under tight deadline pressure in foul weather. Paul introduces a new voice to the podcast.  00:00 – Intro  03:10 – Setting the scene in Becancour, Quebec  05:55 – Record-breaking rain   08:05 – Immediate impacts to application schedule  09:08 – Ripple effects  11:50 – Benefits of single-component application  13:08 – Qualities of Thermo-Sorb VOC  14:24 – A hybrid shop + field application approach is ideal for fast-track EV facility construction  18:19 – Ways applicators are valuable resources during pre-construction  20:25 – Did Nor-Lag finish on time?  21:59 – The four questions (non-technical)  26:11 – Closing remarks

Controlling soluble salts is one of the largest challenges faced during the surface preparation portion of a coating project. Failure to remove soluble salts can drastically shorten a coating's lifecycle. On this episode, Ken Rossy, President of HoldTight, joins us to discuss the differences between atmospheric and immersion services, the debate on allowable soluble salt limits, and how additives can help. All of this and more coming up next on The Red Bucket. 0:00 - Intro 1:36 - Introduction to Kon Rossy 3:17 - Introduction to HoldTight Solutions 6:34 - Why are Salts Detrimental to Steel? 8:38 - “Invisible” Contaminants and How to Find Them 13:18 - Cleanliness in Immersion and Atmospheric Service 19:51 - The Debate on the Amount of Allowable Soluble Salts 25:59 - Using Additives to Remove Salts and Hold Cleanliness 35:46 - "The Four Questions" [Non-Technical] 39:54 - "Tech Tips" 40:21 - Closing Remarks

On this episode of The Red Bucket, Pete Mitchell from GMA Garnet joins us as we explore the various factors of abrasive blasting that contribute to long-term coating performance. The industry has focused on cleanliness and profile for years, but a new study suggests that peak density could be the largest contributing factor. We talk about all of that and more coming up next on The Red Bucket. 0:00 - Intro 2:33 - Introduction to Pete Mitchell 4:39 - Introduction to GMA Garnet 6:08 - The Advantages of Garnet as an Abrasive Blast Media 9:36 - Friability 15:58 - Blast Cleanliness vs. Profile 22:40 - Density vs. Depth 28:51 - What Engineers and Specifiers Need to Know About Abrasives 35:08 - "The Four Questions" [Non-Technical] 38:00 - "Tech Tips" 39:16 - Closing Remarks

Previously on The Red Bucket, we began our exploration into all things concrete with our friend and AMPP Instructor, Paul Kennington. This month, we continue our conversation with Paul, discussing moisture effects, inspection, testing standards, and when to coat the concrete. All of that and more are coming up next on The Red Bucket. 0:00 - Intro 0:58 - Moisture and Concrete 6:02 - ASTM F1869: The Calcium Chloride Test 9:03 - ASTM F2170: The in situ Humidity Probes Test 13:08 - Visually Inspecting Concrete 17:26 - CSP Standards 20:18 - When to Coat Concrete 23:50 - "The Four Questions" [Non-Technical] 26:04 - "Tech Tips" 26:45 - Closing Remarks

It's been said that if you want to have problems, coat concrete. But if you know the intricacies of the concrete and the surrounding environment, the job should go smoothly. Join us this week for part one of our talk with Paul Kennington, AMPP Instructor and Coatings Consultant, about concrete. All of that and more are coming up next on The Red Bucket. 0:00 - Intro and Introduction to Paul Kennington 3:17 - Concrete: The Enemy of Coatings 4:29 - What Makes Up Concrete? 6:31 - The Different Types of Concrete 9:39 - Type 1 Concrete 10:26 - Type 2 Concrete 12:07 - Type 3 Concrete 16:50 - Vapor Barriers 17:54 - Type 4 Concrete 19:01 - Type 5 Concrete 22:05 - The Cure Mechanism (Pt. 1) 22:51 - Concrete vs. Cement 24:12 - The Cure Mechanism (Pt. 2) 32:14 - Closing Remarks

We all know that environmental factors affect a coating project. But it's important to remember how diverse geographic locations can complicate those factors. Today, we talk with Matt Morris of Gulf States Protective Coatings about these challenges and the impact that have on an applicator's day-to-day business. All of that and more are coming up next on The Red Bucket. 0:00 - Intro 2:04 - Introduction to Matt Morris 4:03 - Introduction to Gulf States Protective Coatings 4:49 - Painting Tanks in a Coastal Environment 6:57 - Wind Complications on a Coating Project 9:32 - Shrouding and Salts 14:44 - Surface Preparation for Different Areas in a Tank 19:25 - Crow's Nests and Complex Angles in Storage Tanks 24:26 - Elastomeric Coatings: The Best Friend of a Bolted Ground Storage Tank 25:45 - Elastomeric Coatings vs. Epoxy Coatings 29:32 - "The Four Questions" [Non-Technical] 33:04 - "Tech Tips" 33:57 - Closing Remarks

During this episode, we discuss CUI, its true meaning, and the various factors that influence corrosion with our good friend, Michael Pardo of S&B Engineers & Constructors. We also touch on the value that mentorships bring to the coatings industry. All of that and more coming up next on The Red Bucket. 0:00 - Intro 1:45 - Introduction to Michael Pardo 3:56 - The Importance of Mentors in the Protective Coatings Industry 6:23 - Why Michael Stayed in Coatings 9:39 - Introduction to S&B Engineers and Constructors 10:00 - Corrosion Under Insulation 13:05 - What Does "CUI" Mean? 18:43 - Factors that Impact the Design of Insulation and Fireproofing Systems 22:06 - What Coating Types to Use to Protect Steel 23:16 - Additional Factors that Impact the Design of a System 27:39 - The Importance of a Maintenance Plan 29:05 - The Cost of Corrosion 30:06 - Coating Specifications for Partially Insulated Assets 32:17 - "The Four Questions" [Non-Technical] 35:41 - "Tech Tips" 36:18 - Closing Remarks

Elevated water tank painters face several unique challenges every day when working on the job site. The intricacies of a coatings project become exponential, and safety becomes even more paramount when crews are several hundred feet in the air. During this episode, we will talk with Steve Birchmeier, owner of Semper Fi Industrial Coatings, about the success of such projects. All of that and more coming up next on The Red Bucket. 0:00 - Intro 1:38 - Introduction to Steve Birchmeier and Semper Fi Industrial Coatings 3:59 - The First Step in the Elevated Water Tank Coating Process 5:32 - Surface Preparation Considerations for Elevated Water Tanks 7:13 - Containment for Elevated Water Tank Exteriors 8:18 - Spray Applications vs. Brush and Roll 10:02 - Creative Designs on Elevated Water Tank Exteriors 10:49 - Primers and Intermediate Coats 12:22 - Adjustments for Elevated Water Tank Applications 14:47 - Coating Applications for Elevated Water Tank Interiors 17:52 - What Can Go Wrong When Painting Elevated Water Tanks? 18:52 - Holding Conditions Inside Water Tanks 20:08 - Safety Considerations for Painting Elevated Water Tanks 23:27 - Mechanical Repairs and Welding on Elevated Water Tank Projects 24:30 - Specifications for Elevated Water Tank Projects 27:11 - Travel Requirements for Elevated Water Tank Painters 28:16 - "The Four Questions" [Non-Technical] 30:48 - "Tech Tips" 31:36 - Closing Remarks

On this episode of The Red Bucket, we are joined by Ron Brashear of BYK – a global supplier of specialty chemicals and additives. Together we discuss the chemistry behind additives and their use in the paint formulation process. We also cover how additives can be designed to help the coating perform to the end user's specifications. All of that and more coming up next on The Red Bucket. 0:00 - Intro 1:36 - Introduction to Ron Brashear and BYK 5:22 - The Role Additives Play in Coating Formulations 9:14 - Wetting and Dispersing Additives 13:52 - The Relationship Between Coating Manufacturers and Additives Suppliers [Part 1] 16:39 - Surface Additives 20:59 - Flow Additives 24:30 - Defoamers 27:34 - Anti-Corrosive Pigments 30:04 - The Relationship Between Coating Manufacturers and Additives Suppliers [Part 2] 33:50 - The Misnomer That It's All the Same Thing in the Bucket  35:30 - "The Four Questions" [Non-Technical] 36:54 - "Tech Tips" 37:54 - Closing Remarks

This week on The Red Bucket, we are joined by Tanner Brooks of Peak Industrial Coatings & Linings. We discuss the subtle differences of applying a diverse range of industrial coatings in varying types of facilities. Join us as we cover the challenges associated with coating technologies and service environments. All of that and more coming up next on The Red Bucket. 0:00 - Intro 1:28 - Introduction to Tanner Brooks and Peak Industrial Coatings & Linings 4:32 - Working in Diverse Markets 9:16 - The Importance of Education in the Coatings Industry 10:07 - Surface Preparation and Providing Value 12:09 - Applying Coatings Without Causing Facility Downtime 14:43 - Tanner's Favorite Industries to Work In 15:28 - The Challenges of New Construction 17:41 - Secondary Containment Applications 20:04 - Tank Lining Applications 21:55 - Unique Challenges in the Coatings Industry 23:07 - Writing Specifications 25:00 - Saponification 26:24 - Why It's Not Just Paint 28:14 - Safety Considerations in the Coatings Industry 29:15 - "The Four Questions" [Non-Technical] 31:28 - "Tech Tips" 32:28 - Closing Remarks

Joining us on The Red Bucket is Dr. Marcus Foston of Washington University in St. Louis, Missouri. In our discussion with Dr. Foston, we look forward to the future of the coatings industry. We examine the various renewable raw materials that could impact our industry, what they are, why we chose them, and how they are used. All of that and more on The Red Bucket. 0:00 - Intro 1:06 - Introduction to Dr. Marcus Foston & Washington University's Energy, Environmental & Chemical Engineering Department 3:57 - Renewables 8:28 - How Coatings Can Go Green 11:03 - Vegetable Oils for Use in Coatings 12:34 - Waste Feedstocks 13:40 - How to Go Green by Changing the Parts 14:41 - The Challenge of Going Green in a Large-Scale, Commercially-Viable Way 16:53 - What is Lignin, and How Can It Be Used in Coatings? 21:43 - Renewables in Fire-Retardant Coatings 27:36 - Cellulose in Coatings 28:58 - How the Coatings Industry and Academia Can Help Each Other 31:04 - "The Four Questions" [Non-Technical] 36:26 - "Tech Tips" 36:51 - Closing Remarks

Due to changing laws and regulations, the cannabis industry has seen massive growth in the last several years. This growth has led to major capital investments and new construction as producers look to build new facilities in which to produce cannabis. During this next episode, we talk about all the factors that are needed to make a good resinous flooring recommendation for one of these facilities. All this and more coming up next on The Red Bucket. 0:00 - Intro 1:38 - Introduction to Michael Greenblatt and Surface Technology 2:48 - The Cannabis Industry and Its Similarities to the Pharmaceutical and Food and Beverage Industries 5:43 - The Construction Process Knowledge Gaps in the Cannabis Industry 8:06 - Regulatory Challenges in the Cannabis Industy 10:55 - Why You Shouldn't Just Buy a Flooring System off the Shelf 12:26 - Security Regulations on Projects in the Cannabis Industry 14:54 - The Requirements for Cleanroom Floors and Walls 15:57 - The Benefits of Resinous Floor and Wall Systems 18:06 - Floor and Wall System Recommendations for Cannabis Facilities 20:23 - The Benefits of Urethane Cement 22:07 - Urethane Cement vs. Epoxy Mortars 23:17 - The Importance of Using a Qualified Flooring Installer 24:24 - Chemical Resistance Requirements in a Cannabis Facility 27:14 - The Importance of Reflective and Light-Colored Flooring in a Cannabis Growing Facility 30:18 - Why You Shouldn't Leave Concrete Bare 33:18 - The Future of the Cannabis Industry 36:07 - "The Four Questions" [Non-Technical] 39:20 - Closing Remarks 40:35 - "Tech Tips"

Summary Have you ever wondered what the role of a coating inspector is and why they are essential to a successful coatings project? Are you interested in the tools that an inspector uses and the advancements that have been made through technological innovation? Have you wondered how drones are being used to not only increase the speed of inspections but also increase safety for workers? The answers to all that and more are coming up next on The Red Bucket. Timestamps 0:00 - Introduction to The Red Bucket: A Protective Coatings Podcast 4:42 - Introduction to Drayton Adkins and Team Bulwark 6:29 - Drayton's connection to Carboline 10:14 - What Does “Coating Inspection” Mean? 12:09 - What are the Best Practices for Coating Inspections? 15:17 - The Inspector's Gadgets: Type One Gauge 18:30 - The Inspector's Gadgets: Type Two Gauge 19:58 - Why a Coatings Inspector Must Understand the Vocabulary 22:57 - The Inspector's Gadgets: Sling Psychrometer 25:12 - The Inspector's Gadgets: Digital Hygrometers 27:35 - The Inspector's Gadgets: Surface Preparation Tools 31:55 - The Inspector's Gadgets: Drones 37:43 - Drone Technical Report 41:00- The Drone Infrastructure Inspection Act 43:52 - "The Four Questions" [Non-Technical] 46:49 - Introduction to "Tech Tips" 47:53 - "Tech Tips" 48:20 - Outro Find out more at https://carboline-tech-service-podcast.pinecast.co

Carboline's President and Chief Operating Officer, Chris Tiernay, joins Jack and Paul to discuss the company's past, present, and future in this very special episode. Oh, and the trio also announce the podcast's new name and direction! 0:00 – Intro 1:00 – Introduction to Chris Tiernay 2:00 – Carboline's history 4:23 – Raw materials and supply chain 7:05 – Carboline's future 11:53 – The future of the Tech Service Podcast 14:48 – Outro Subscribe via iTunes, Google Play, or Spotify. Find out more at https://carboline-tech-service-podcast.pinecast.co

In this special episode of the Carboline Tech Service Podcast, Jack and Paul celebrate reaching 200 episodes by taking a look back at some of the on-air highs (and lows) throughout the past few years. 0:00 – Intro 2:05 – Highlight #1: Shooting Jim Rippe out of a cannon 5:53 – Highlight #2: Galvanizing vs. inorganic zinc 9:03 – Highlight #3: The spheres are pretty 9:58 – Highlight #4: The differences between fire protection standards 12:35 – Highlight #5: Alien acid and baked phenolics 13:50 – Highlight #6: AWWA D102 - Inside coating systems 17:59 – Highlight #7: A voicemail from HR 19:27 – Highlight #8: CUI and ISO 19277 22:08 – Closing thoughts 23:22 – Highlight #9: A voicemail from EHS Subscribe via iTunes, Google Play, or Spotify. Find out more at https://carboline-tech-service-podcast.pinecast.co

Cortney Chalifoux, PhD, PE, PCS, Coatings Program Manager at Pond & Company, joins Jack and Paul to close out their series on specifications. They discuss the significance of having the right specification and explore what engineers see as the most crucial part of a specification (SPOILER ALERT: It's the whole thing). 0:00 – Intro and important announcement 1:53 – Introduction to Cortney Chalifoux and Pond Engineering 3:27 – Why specifications are necessary 4:32 – Why following the proper specification is critical 5:24 – The most important part of a specification for engineers 6:28 – The general portion of a specification 7:00 – The products portion of a specification 8:37 – The execution portion of a specification 9:33 – Wrap up Subscribe via iTunes, Google Play, or Spotify. Find out more at https://carboline-tech-service-podcast.pinecast.co

Kevin Kipp, Co-Owner, Project Manager, and Estimator at Hardig Industrial Services, joins Jack and Paul to weigh in on their ongoing discussion on specifications. They explore the process of matching contractors with projects and products based on their competencies and the importance of talking through specifications during pre-job conferences. 0:00 – Intro 1:03 – Introduction to Kevin Kipp and Hardig Industrial Services 2:31 – What contractors look for in specifications 4:41 – Frequent issues with specifications 6:37 – The importance of contractor selection based on specifications 8:57 – Matching contractors with products 10:21 – Standards and training protocols for contractors 12:47 – The importance of pre-job conferences 15:06 – Wrap up Subscribe via iTunes, Google Play, or Spotify. Find out more at https://carboline-tech-service-podcast.pinecast.co

Engineering Sales Manager Jeremy Sukola is back to cover the basics of specification writing with Jack and Paul. They discuss the three primary parts of a specification and the benefits of including manufacturers in the writing process. 0:00 – Intro 3:01 – The main authority for specification writing 4:20 – The three parts of a specification 4:58 – Specification Part 1: General & scope of work 7:01 – How improper specifications impact coatings 8:02 – The 4 C's of writing a specification 8:53 – Specification Part 2: Products 13:24 – The value of including manufacturers in the specification writing process 14:05 – Specification Part 3: Execution 17:01 – Wrap up Subscribe via iTunes, Google Play, or Spotify.

Vice President of Marketing Melissa Molitor joins Jack and Paul to discuss Carboline's new young professionals' program, CarboNext. The trio explores the need for more education and networking opportunities for young professionals in the corrosion industry and how CarboNext can be a valuable resource. 0:00 – Intro 1:15 – Intro to CarboNext 1:52 – Why we started CarboNext 3:03 – Carboline's dedication to education 3:38 – The need for programs like CarboNext 4:42 – How to get involved in CarboNext 6:04 – How CarboNext is different from other programs 6:59 – CarboNext on LinkedIn 7:38 – CarboNext at trade shows 8:34 – More exciting Carboline marketing news 10:03 – Wrap up Subscribe via iTunes, Google Play, or Spotify.

Carboline Engineering Sales Manager Jeremy Sukola joins Jack and Paul to discuss saturated surface dry (SSD). The trio discusses the factors that make SSD crucial to a successful concrete resurfacing job. 0:00 – Intro 1:10 – The definition of Saturated Surface Dry (SSD) 2:00 – Why SSD is essential to a concrete coatings project 3:20 – Clarification on coatings that require SSD 4:40 – The science behind SSD 8:10 – Project factors that drive SSD 9:51 – Onsite testing for SSD 11:05 – Natural or accidental achievement of SSD 13:06 - Summary Subscribe via iTunes, Google Play, or Spotify.

Carboline Water/Wastewater Market Manager Brian Cheshire joins Jack and Paul to discuss the challenges facing the water and wastewater industries today. They discuss the current status of infrastructure and the large investment that was just passed by the federal government. Subscribe via iTunes, Google Play, or Spotify.

Cabot Wilkinson and Dwayne Lum of Carboline join Jack and Paul to discuss a recent discovery about one of our legacy products. Listen as they discuss what makes this fireproofing project so unique. 0:00 – Intro 2:30 – Dwayne Lum and Cabot Wilkinson 3:45 – Introduction to the fireproofing project 6:00 – Service environment concerns 10:45 – The product 11:45 – Testing to validate the product's performance 16:00 – Wrap up Subscribe via iTunes, Google Play, or Spotify.

The CEO of Apellix Robotics, Robert Dahlstrom, joins Jack and Paul to discuss how drones make a difference in the coatings industry. The trio discusses the latest advancements in drone technology as it refers to coatings. 0:00 – Intro 2:00 – Introduction to Apellix Robotics 3:00 – Safety advantages of drone use 4:30 – Drones versus jobs 6:10 – How do drones measure dry film thickness? 10:10 – Data, data, and more data 11:20 – Inspection versus paint application through drone robotics 15:00 – Wrap up Subscribe via iTunes, Google Play, or Spotify.

Russ Nakoneshny, the Director of Canada for Carboline, joins Paul Atzemis and Jack Walker to discuss Carboline's expansion for Canada. The trio explores the changes and discusses ideal candidates for new open positions. 0:00 – Intro 1:30 – Changes on how Carboline conducts business in Canada 4:45 – Staffing challenges 7:45 – Industrial coatings growth in Canada and the ideal Carboline Canada Sales candidate 10:15 – Other openings as a part of the Canada expansion 12:30 – Wrap Up Subscribe via iTunes, Google Play, or Spotify.

Holly Tyler of SPC and Doug Sinitiere of Carboline join Paul and Jack to discuss corrosion causes and coating solutions for Midstream Oil and Gas assets. They'll discuss pipelines, storage tanks, and more. 0:00 - Intro 2:00 - Part 1 recap 3:50 - Biggest corrosion challenges in pipelines 4:40 - Coating solutions for corrosion challenges in pipelines 6:50 - Corrosion protection for above ground storage tanks 8:00 - Corrosion protection for storage tank roofs 9:00 - Tank ring corrosion protection 10:00 - Coating solutions for spherical storage tanks 11:30 - Corrosion protection for LNG facilities 15:00 - Coating application considerations 18:50 - Coatings for the internals of pipe 20:00 - Coatings for solar panel structures 21:00 - Wrap up Subscribe via iTunes, Google Play, or Spotify.

Episode 189 – AMPP Update with Bob Chalker Pt. 2 A continuation of the discussion about AMPP with CEO Bob Chalker. Make sure to listen to part 1 (Episode 188) before you listen to this episode. 0:00 – Intro and YouTube 2:00 – The FDA Network of Experts 4:00 – The expansion of the industry beyond steel and concrete 5:45 – Involvement in real-life material problems such as the collapsed condo in Florida 7:00 – Naming of industry standards. Will the names change with the new organization? 11:00 – Master Painter's Institute 12:30 – Wrap up Subscribe via iTunes, Google Play, or Spotify.

The Association of Materials Protection and Performance (AMPP) Chief Executive Officer Bob Chalker joins the guys to talk about the AMPP organization now that the merger is complete. In part one of the discussion, they discuss the significance of the new name and organization.   0:00 – Intro 1:45 – The formation of AMPP 6:15 – Breaking down “the competitor” walls 8:45 – AMPP – The meaning behind the name 10:45 – The rebranding process 15:15 – The AMPP logo 16:45 – Wrap up Subscribe via iTunes, Google Play, or Spotify.

Episode 187 – Michael Sellars from Elcometer The Managing Director of Elcometer, Michael Sellars, joins Paul Atzemis and Jack Walker to discuss all things Elcometer. This episode was recorded live at SSPC Coatings + in Orlando, FL, from 2019. 0:00 – Intro 3:30 – Michael Sellars – Elcometer 5:50 – History of coating inspection gauges 6:30 – Coating inspection gauges of today 8:00 – Elcometer and abrasive blasting equipment 10:30 – Managing the increased level of data with new coating inspection gauges 13:19 – Wrap Up Subscribe via iTunes, Google Play, or Spotify.

Carboline Water/Wastewater Market Manager Brian Cheshire joins Paul Atzemis and Jack Walker to discuss water treatment facilities. They discuss the treatment process, substrates, and coatings used in these facilities. 1:30 – The difference between water treatment facilities and wastewater treatment facilities 4:00 – History of water treatment for drinking water 5:30 – The water treatment process 7:30 – Chemical treatments in the water purification process 11:00 – Substrates found in water treatment facilities 14:00 – Coatings used in water purification facilities 16:00 – Filter media regeneration 17:30 – Carboline coatings for water treatment facilities 19:30 – Wrap up Subscribe via iTunes, Google Play, or Spotify. This podcast is powered by Pinecast.

Pete Mitchell of GMA Garnet joins Jack Walker and Paul Atzemis to discuss the role blast media selection plays in surface cleanliness. They discuss the impact blast media can have on a coatings job.   0:00 – Intro to GMA Garnet and Pete Mitchell 3:00 – Studies on the blast media 4:00 – Garnet as a blast media versus other types of media 6:30 – The importance of friability when selecting blast media 10:00 – The effects of dust due to media and its effect on a coating system 12:00 – The importance of peak density when measuring profile 16:00 – Wrap up Subscribe via iTunes, Google Play, or Spotify. This podcast is powered by Pinecast.

Jack Walker and Paul Atzemis are joined by Holly Tyler of SPC and Doug Sinitiere to discuss midstream oil & gas facilities, equipment, and piping. They explore corrosion considerations for this sector of the industry. 0:00 – Intro 2:00 – What is midstream oil & gas? 3:30 – Assets found in midstream oil & gas 4:30 – LNG Plants (liquid natural gas) 5:45 – Pipeline systems 7:00 – Regulations and regulatory bodies to consider 12:00 – Owners and operators in midstream oil & gas 14:45 – Corrosion challenges for midstream oil & gas assets and facilities 19:45 – Pipeline routing Subscribe via iTunes, Google Play, or Spotify. This podcast is powered by Pinecast.

Paul Atzemis and Jack Walker welcome Sean Younger back to the show. The trio discusses the differences between solvent and water-based intumescent coatings. They cover the advantages and disadvantages of both and the importance of being able to offer both solvent and water-based intumescent coatings. Subscribe via iTunes, Google Play, or Spotify. This podcast is powered by Pinecast.

Episode Notes Technical Service Engineer William “Bill-um” Seawell joins Jack Walker and Paul Atzemis to discuss the science behind phenalkamine epoxy coatings. The trio discusses where the phenalkamine coatings are used and the properties that make them an excellent choice for those services. 0:00 – Intro 2:30 – What Is a phenalkamine epoxy? 4:15 – Four factors that differentiate phenalkamine epoxies 7:30 – Moisture tolerance and phenalkamine epoxies 8:30 – Chemical resistance of phenalkamine epoxies 11:30 – Blush resistance of phenalkamine epoxies 13:00 – Summary of physical properties of phenalkamine epoxies 14:15 – Wrap up Subscribe via iTunes, Google Play, or Spotify. This podcast is powered by Pinecast.

Episode Notes Carboline Water/Wastewater Market Manager Brian Cheshire joins Jack Walker and Paul Atzemis to discuss the coating systems for the interior of water tanks as outlined by AWWA D102. 0:00 – Intro 2:00 – Review of AWWA D102 4:00 – Overview of interior system requirements per AWWA D102 – Coating Steel Water-Storage Tanks 5:00 – Systems used to coat the interior of water tanks per AWWA D102 – Coating Steel Water-Storage Tanks 9:00 – NSF/ANSI/CAN 600 effects on the systems outlined in AWWA D102 11:00 – Interior dry surfaces versus interior wet surfaces 13:30 – Carboline products used for AWWA D102 internal systems 15:30 – Wrap up Subscribe via iTunes, Google Play, or Spotify. This podcast is powered by Pinecast.

Matt McDonald, Director of Sales – Rail for Carboline, joins Jack Walker and Paul Atzemis to discuss important factors when deciding which coating to specify for rail work. They explore the advantages of selecting the right coating the first time. 0:00 – Intro 2:00 – Matt McDonald – Carboline Rail Sales 3:00 – The importance of proven performance 4:15 – The balance of proven performance and innovation 5:45 – The evaluation of coatings for rail exteriors 8:00 – No substitute for field history 9:30 – Cost of service life versus cost per gallon 12:00 – Savings on maintenance and repair by selecting a sustainable coating 14:45 – Tracking coating performance 17:00 – Wrap up Subscribe via iTunes, Google Play, or Spotify. This podcast is powered by Pinecast.

Carboline Oil & Gas Market Manager Doug Sinitiere joins Jack Walker and Paul Atzemis to discuss corrosion associated with Upstream Oil & Gas Assets and the coatings that protect them. 0:00 – Intro and the new Carboline Tech Service Podcast listener 3:45 – Re-introduction to upstream oil & gas 4:30 – Standards used to specify coatings for upstream oil & gas assets 7:00 – Certifications for fireproofing systems used with upstream oil & gas assets 13:00 – Coatings used for upstream oil & gas assets 19:31 – Wrap Up Subscribe via iTunes, Google Play, or Spotify. This podcast is powered by Pinecast.

Carboline Rail Sales Rep Joe Foster joins Paul Atzemis and Jack Walker to discuss how jacketed tank cars have a space between the jacket and the tank that requires inspection during the car's maintenance cycle.   0:00 – Intro 2:20 – Joe Foster – Carboline Rail Sales 3:00 – The "third side" of a rail car (tank car) 3:50 – Tank cars 5:00 – Jacketed tank cars and their similarities to coatings under insulation 5:30 – Visual look at the inspection areas 8:30 – Number of inspection points on jacketed tank cars 9:30 – Jacketed versus non-jacketed tank cars 10:00 – Corrosion mechanisms between the jacket and the tank 12:00 – Taking the rail car apart for inspection 12:40 – Coatings used to protect the space between the jacket and the tank on a rail car 15:00 – Wrap up Subscribe via iTunes, Google Play, or Spotify. This podcast is powered by Pinecast.

Carboline Water/Wastewater Market Manager Brian Cheshire joins Jack Walker and Paul Atzemis to discuss the AWWA D102 standard as it relates to coatings for the exterior of water tanks. They discuss factors relating to the industry, coating choice, surface prep, and more. 0:00 – MAJOR ANNOUNCEMENT for the Carboline Tech Service Podcast 3:00 – Brian Cheshire and an introduction to water tanks 8:00 – AWWA D102 – Coating Steel Water-Storage Tanks 10:00 – Outside coating systems (OCS) per AWWA D102 14:00 – Use of fluoropolymers for the exterior coating on water tanks 17:00 – Surface preparation for maintenance systems for coating the exterior of water tanks 19:30 – How to use the AWWA D102 standard 21:00 – Wrap up Subscribe via iTunes, Google Play, or Spotify. This podcast is powered by Pinecast.

Carboline Vice President of Research, Development & Innovation Jeff Anderson joins Paul Atzemis and Jack Walker to discuss common testing for coatings designed for immersion service. They examine the methods of testing and the reasoning behind them. 0:00 – Intro 2:00 – What is considered immersion service? 3:15 – Typical testing of coatings for immersion service 4:00 – Typical screening methods for coatings for immersion service 5:54 – NACE TM0174Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials on Metallic Substrates in Immersion Service 8:15 – Coatings used for immersion service 9:00 – Benefits of long-term immersion testing 11:45 – Commodity purity evaluation during immersion testing 13:00 – Additional testing for immersion scenarios that include undissolved solids or high flow 14:30 – Wrap up Subscribe via iTunes, Google Play, or Spotify. This podcast is powered by Pinecast.

Jack Walker and Paul Atzemis discuss common laboratory tests for coatings in atmospheric service. They discuss the definition of atmospheric service and describe some of the various tests. 0:00 – Intro and Paula 3:00 – Definition of atmospheric service 3:45 – CTSP Episode 130 – ISO 12944 Environment Classifications 4:15 – Coating types for atmospheric service 7:00 – Chalking and fading of epoxies in atmospheric service 8:30 – Polyurethanes and polyaspartics in atmospheric service 9:15 – QUV testing of coatings for atmospheric service 12:00 – Salt fog testing for coatings 13:30 – Adhesion testing for coatings 14:30 – Mandrel bend test for coatings 16:00 – Impact and Reverse Impact testing of coatings 17:00 – Natural weather testing 18:45 – Wrap up Subscribe via iTunes, Google Play, or Spotify. This podcast is powered by Pinecast.

Carboline Market Manager Brian Cheshire joins Paul Atzemis and Jack Walker to discuss the heavily used standard AWWA C210. This standard covers liquid-epoxy coatings for steel water pipes and fittings. This standard is widely used in the water industry and has begun to be used for other assets besides steel water pipes.   0:00 – Intro 2:00 – Drinking water infrastructure in the United States 4:45 – Types of steel pipes in the water industry and typical coatings that meet this standard 7:45 – Minimum requirements for AWWA C210 9:00 – Application of coatings per AWWA C210 9:30 – The constructor, the manufacturer, and the purchaser 10:00 – The growth of AWWA C210 and use in AWWA D102 11:00 – Testing requirements for coatings per AWWA C210 13:30 – Quality control measures per AWWA C210 15:30 – Real-world example that would benefit from AWWA C210 approved coatings 16:45 – Wrap up Subscribe via iTunes, Google Play, or Spotify. This podcast is powered by Pinecast.