Podcasts about Sirius

This week, Julie & Brandy read the internet. And it's pretty much all MAGA slop.*****Follow Trevor Trump and wish him a Happy Birthday on TikTok: @TrevorMorris245bBuy a Cameo from Black Trump!*******CHECK OUT FREE EPISODES OF JULIE & BRANDY'S PATREON PODCAST**********FOLLOW JULIE ON INSTAGRAM & TWITTER****FOLLOW BRANDY ON INSTAGRAM & TWITTER***CHECK OUT THEIR T-SHIRTS!***EMAIL THEM! JulieBrandyPodcast@gmail.com******************** Dumb Gay Politics with Julie & Brandy **** Dumb Gay Podcast with Julie & Brandy **** Julie Goldman **** Brandy Howard **** Julie and Brandy *** The People's Couch *** DGP *** Gay Podcast *** Political Podcast *** Lesbian *** Bravo *** Housewives *** Queer *** Liberal **** LGBTQ **** Killer Burlesque *** Host *** Portland *** Denver *** Nightmare on Strip Street *** Funny *** Comedy *** Democrat *** Progressive *** Comedian *** Jewish *** Politics *** Left *** San Francisco ***See Privacy Policy at https://art19.com/privacy and California Privacy Notice at https://art19.com/privacy#do-not-sell-my-info.

Trump's antics :: "This is war" - Trump about Venezuela :: MK Ultra is real, the gov looked into woo woo subjects :: People who are trying to ring the alarm that AI is dangerous :: Legalizing drugs would end fent problems faster and better than war would :: Gypsy Rose Blanchard and psychopathy :: The psychopaths want us to not care :: Movies actually mind control :: The US knew the Japanese were going to bomb Pearl Harbor :: Caller asks about convo with Bonnie from Porcfest and Tether :: EU fines Elon Musk's X $140,000,000 :: Turd's problem with Indians :: Is there a NAP argument for cop unalivings? :: Candace Owens saga and cult families in Delaware :: Trannies enslaved to big pharma :: 2025-12-07 Hosts: Bonnie, Angelo and Riley O'Bill

Trump's antics :: "This is war" - Trump about Venezuela :: MK Ultra is real, the gov looked into woo woo subjects :: People who are trying to ring the alarm that AI is dangerous :: Legalizing drugs would end fent problems faster and better than war would :: Gypsy Rose Blanchard and psychopathy :: The psychopaths want us to not care :: Movies actually mind control :: The US knew the Japanese were going to bomb Pearl Harbor :: Caller asks about convo with Bonnie from Porcfest and Tether :: EU fines Elon Musk's X $140,000,000 :: Turd's problem with Indians :: Is there a NAP argument for cop unalivings? :: Candace Owens saga and cult families in Delaware :: Trannies enslaved to big pharma :: 2025-12-07 Hosts: Bonnie, Angelo and Riley O'Bill

STAYradio Episode #296 aired Friday December 5th, 2025. This episode features new music by Hawk, Wax Motif, Basta, Relova, Meduza, Stripes, Malaa and many more!!!

PSYOPs :: NCI engineered reality scoring system :: Sarah in NM wants to vote for the mayor that will keep speeding cameras :: Rob from VT calls about the "Dick act" :: Book: Lawful Tax Avoidance (.com) :: Dave Ridley calls about ex-cop turning pro-freedom and challenging the "resisting arrest" law in NH :: Skeeter says freedom is the real psyop/ fails to deny working for the government :: Jet calls to discuss mindsets in relation to government :: Right to travel vs. driving :: FSP :: Freedom migration to New Hampshire :: 2025-11-30 Hosts: Stu, Bear Arms, Mr. Penguin

In this conversation, Britten welcomes back Suprasensory Shahir for their third appearance on Moon to Moon to explore Living Emergence as a relationship to divination and omens. Recording during Mercury's helical rising - when Mercury becomes visible in the pre-dawn sky after its retrograde - they discuss how omens are messages rising and becoming visible, and how divination serves as a practice of aligned action that calls forth the spirit.   Topics They Cover: Living Emergence as aligned action that calls forth the spirit, with messages rising and becoming visible Mercury as the lord of divination and the significance of its current helical rising How dream divination guided major life decisions, from choosing graduate schools to adopting Britten's dog The Three Graces story: how omens can simmer and reveal themselves across time through multiple channels Navigating the cultural baggage around the word "omen" and why it often conjures fear rather than curiosity The difference between literal and obscure omens, and how they ask us to connect dots or revisit them in hindsight Sagittarius energy and the balance between the human self making "good choices" and the beast self trusting instinct Why shame blocks Living Emergence and how omens help us cut through the heaviness of infinite choice The Eight of Wands as the swiftness of Mercury in Sagittarius How cultivating trust in divination is a process of becoming more fluent and masterful over time Staying with your own omens rather than getting lost in comparison with others' paths The upcoming Oh My Omens! workshop on December 14th in Living Emergence   Shahir emphasizes that omens are a form of preparation and attunement to natural rhythms, like ancient Egyptians reading the helical rising of Sirius to predict the Nile's flooding. They describe their role as an omen translator who helps people navigate difficult transits and challenging cards not by abandoning them in the desert, but by offering multiple perspectives and helping them trust their own agency to work with what arises. This conversation celebrates divination as one of the most direct ways to interface with a magical life, where we write our own stories in conversation with the Universe.   Learn More: Suprasensory Shahir (they/he) is a love devotee mystic who shows up as an astrologer of the moment & diviner of the future. They embrace the spiritual tools of tarot, astrology & spirit guide connections to help people embrace a magical life. Shahir is a Queer Muslim from Southeast Asia who aligns themselves with Sufism, a mystical and inward-focused dimension of Islam.    Consultation: https://suprasensory.as.me/schedule.php  Writing: https://suprasensory.substack.com/  YouTube: Suprasensory Astrology https://www.youtube.com/@suprasensory  Instagram & Threads: https://www.instagram.com/suprasensoryshahir    Revisit Shahir's previous Moon to Moon episodes: 147. Unshaming the Third House 168. Staying in Your Mystical Circle   +++   The Oh My Omens! workshop with Shahir will take place on Sunday, December 14th inside Living Emergence, Britten's new living, year-round ecosystem. Part mystery school, part creative laboratory, part game, part devotional gym for magic and intuition. This is by far the most dynamic, emergent, and accessible experience she's ever created.    Britten's course Unshaming Your Chart begins December 17th inside Living Emergence. The class includes a two-hour initiation, access to the pre-recorded library of "Unshaming the Signs" and "Unshaming the Houses," and meetups in January and February with breakout groups for deep community processing. Doors open on December 12th.   Living Emergence reopens this month. You can join as a member for $95/month to access Unshaming Your Chart, the Oh My Omens! workshop, and the entire Living Emergence ecosystem, or purchase Unshaming Your Chart as a standalone class for $400.   +++ E M E R G E N C E  A S T R O L O G Y ⁠⁠https://brittenlarue.com/ ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠Instagram: ⁠⁠⁠⁠⁠@brittenlarue Order Living Astrology Join my newsletter here Check out my new podcast CRYSTAL BALLERS on Spotify, Podbean, and Apple. +++ Podcast art: Angela George. Podcast music: Jonathan Koe.

Opie wakes up in a skyscraper 500 feet above NYC and instantly loses his mind over the annual “holiday tip pamphlet” that demands envelopes for 40+ building staffers while Jimmy Fallon's perfect-happy Christmas vibes play on Sirius. From rage-baiting to doormen who make six figures in cash tips to the worst field-goal attempt in NFL history and French chocolate-fart pills, this episode is pure unfiltered holiday misery you'll relate to harder than you want to admit. Coffee cups up, bitches

And so is Trump.******CHECK OUT FREE EPISODES OF JULIE & BRANDY'S PATREON PODCAST************* Dumb Gay Politics with Julie & Brandy **** Dumb Gay Podcast with Julie & Brandy **** Julie Goldman **** Brandy Howard **** Julie and Brandy *** The People's Couch *** DGP *** Gay Podcast *** Political Podcast *** Lesbian *** Bravo *** Housewives *** Queer *** Liberal **** LGBTQ **** Killer Burlesque *** Host *** Portland *** Denver *** Nightmare on Strip Street *** Funny *** Comedy *** Democrat *** Progressive *** Comedian *** Jewish *** Politics *** Left *** See Privacy Policy at https://art19.com/privacy and California Privacy Notice at https://art19.com/privacy#do-not-sell-my-info.

PSYOPs :: NCI engineered reality scoring system :: Sarah in NM wants to vote for the mayor that will keep speeding cameras :: Rob from VT calls about the "Dick act" :: Book: Lawful Tax Avoidance (.com) :: Dave Ridley calls about ex-cop turning pro-freedom and challenging the "resisting arrest" law in NH :: Skeeter says freedom is the real psyop/ fails to deny working for the government :: Jet calls to discuss mindsets in relation to government :: Right to travel vs. driving :: FSP :: Freedom migration to New Hampshire :: 2025-11-30 Hosts: Stu, Bear Arms, Mr. Penguin

Greetings in love, light, and wisdom as one.  A situation arose with this month's channeling session with the members of Ashtar Command and the session chosen for this month only had ten minutes total on side B. We had another tape with only the first thirty minutes recorded so we added them together to make a complete addition to the Ashtar Command archives. We will have guests in the second session but this session it was just me answering questions right away from Korton about a astral travel trip Tia and I had taken earlier that day out to Alpha Centauri and back using Sirius as a waypoint. This was a breakthrough for me that we had made it that far to visit the base on Alpha Centauri and so he was interested in the process that helped me achieve that trip. He can only stay for a short while so Tia comes on and we go over the trip also as a sort of continuing debrief of how everything went. Much of what we discuss is about the navigation needed to reach a point in space when constellations are changing as your position in space is changing. She gives me some good tips about using known planets and constellations as waypoints so as to not lose direction. She also helps me to understand the use of charged particles and dark matter as fuel that I was testing out for the first time. We next talk about the base itself on Alpha Centauri and how it was outside instead of being deep below a planet like Hades base. We finished with coming up with analogies to use for future trips that will bring back all the successful things done that day. Kiri is the next very pregnant speaker and we start off with chitchat about her pregnancy, the end of the ski season and putting in a golf course on the base. She has a funny response to that last one. We finally get to coercion questions and her advice for shortening coercive commands into one or two word sentences. After that it's time for Omal to come on for the minute or so left on the tape before we move on to his picking things up again on side two.   For full transcripts of this session and more information about Hades Base and the 6th dimension, please visit our website:  http://hadesbasenews.com  The sessions lasted from 1992 to 2001 with this one being taped on 02/06/93 & 05/20/1994. Side one includes:   1.)(0:00)- Korton only has a few minutes to channel so he uses the time to debrief me on a trip he already had a report but wanted to hear firsthand what it was I did to get to where I was going in my astral body.   2.)(3:46)- Tia and I now go over what took place during our astral travel trip together to Alpha Centauri and how not to get lost when constellations seen from Earth look so different the closer you get to them.   2.)(3:46)- Tia and I now go over what took place during our astral travel trip together to Alpha Centauri and how not to get lost when constellations seen from Earth look so different the closer you get to them.

Thanksgiving with activists :: Quebec to ban public prayer :: Is covering your skin for your husband "freedom"? :: Open AI shut down their safety team :: Trump is using one shooter to crack down on all immigrants :: The ridiculousness of "This Land is Your Land, My Land" song :: Economic pressure to get men to join the military :: Shout out to Ron Paul :: Are Muslims wearing fetish outfits? :: Trump basically declaring war with Venezuela :: Does Trump want a third term? :: The CIA started by Nazis and MI6 and running drugs :: The penny worth more than a Bitcoin? :: 2025-11-29 Hosts: Bonnie, Riley O Bill, Angelo

Thanksgiving with activists :: Quebec to ban public prayer :: Is covering your skin for your husband "freedom"? :: Open AI shut down their safety team :: Trump is using one shooter to crack down on all immigrants :: The ridiculousness of "This Land is Your Land, My Land" song :: Economic pressure to get men to join the military :: Shout out to Ron Paul :: Are Muslims wearing fetish outfits? :: Trump basically declaring war with Venezuela :: Does Trump want a third term? :: The CIA started by Nazis and MI6 and running drugs :: The penny worth more than a Bitcoin? :: 2025-11-29 Hosts: Bonnie, Riley O Bill, Angelo

STAYradio Episode #295 aired Friday November 28th, 2025. This episode features new music by HAYLA, Fashen, Donny Graves, CHANEY, Mister Gray & Rokwell, 5HOURS, MORTEN, Kaskade and many more!!

Antoine Fourcade, cofondateur de Sirius Space Services, était l'invité de François Sorel dans Tech & Co, la quotidienne, ce jeudi 27 novembre. Il s'est penché sur les stratégies pour relancer la conquête spatiale française, sur BFM Business. Retrouvez l'émission du lundi au jeudi et réécoutez la en podcast.

This week, Julie & Brandy discuss Trump signing the Epstein bill, Marjorie Taylor Greene's retirement announcement, and how to deal with the nightmare of the holidays. *******CHECK OUT FREE EPISODES OF JULIE & BRANDY'S PATREON PODCAST**********DEALS FROM OUR SPONSORS:NUTRAFOL HAIR SUPPLEMENTS: Get $10 off your first month's subscription + free shipping. Go to www.Nutrafol.com and enter promo code DGP at checkout**********FOLLOW JULIE ON INSTAGRAM & TWITTER****FOLLOW BRANDY ON INSTAGRAM & TWITTER***CHECK OUT THEIR T-SHIRTS!***EMAIL THEM! JulieBrandyPodcast@gmail.com******* Dumb Gay Politics with Julie & Brandy **** Dumb Gay Podcast with Julie & Brandy **** Julie Goldman **** Brandy Howard **** Julie and Brandy *** The People's Couch *** DGP *** Gay Podcast *** Political Podcast *** Lesbian *** Bravo *** Housewives *** Queer *** Liberal **** LGBTQ **** Killer Burlesque *** Host *** Portland *** Denver *** Nightmare on Strip Street *** Funny *** Comedy *** Democrat *** Progressive *** Comedian *** Jewish *** Politics *** Left *** San Francisco ***See Privacy Policy at https://art19.com/privacy and California Privacy Notice at https://art19.com/privacy#do-not-sell-my-info.

No cannabis for veterans? :: Dave Ridley calls about AI doom and offers solutions :: Paul calls about Ukraine/Russia - recommends book: "what's our problem" :: Marjorie Taylor Greene resigns :: Sarah from NM calls about inspiring voters :: different flavors of communism :: Skeeter calls about HOAs - can't define his terms :: Trump Ukraine deal :: Eugenist origins of Zionism :: Edward calls about the war on drugs :: 2025-11-22 Hosts: Stu, Riley O Bill

Under the mystical energy of the New Moon in Scorpio, Therese channels a profound message from the Golden Circle Council of Sirius and the Arcturian Council of Light on the sacred power of inner purification.This transmission invites you to release the stories of suffering that no longer serve your evolution and to allow your mind to be cleansed of fear, doubt, and distortion. The Councils remind us that our true power lies not in control—but in surrendering to the divine current that flows through us, as conduits of higher love and light.Therese also leads a guided meditation and prayer for universal love, activating deeper compassion, presence, and remembrance of unity consciousness.

Mr.Sirius es una de las tantas bandas japonesas que se formaron a mediados de los 80 con solo 2 álbumes lanzados en su corta carrera. La más exitosa y considerada como la mejor es la segunda oferta denominada Dirge de 1990. La música es una combinación de pasajes sinfónicos con una clara dirección clásica y una sensación de Canterbury agregada a la mezcla.

No cannabis for veterans? :: Dave Ridley calls about AI doom and offers solutions :: Paul calls about Ukraine/Russia - recommends book: "what's our problem" :: Marjorie Taylor Greene resigns :: Sarah from NM calls about inspiring voters :: different flavors of communism :: Skeeter calls about HOAs - can't define his terms :: Trump Ukraine deal :: Eugenist origins of Zionism :: Edward calls about the war on drugs :: 2025-11-22 Hosts: Stu, Riley O Bill

Available on Amazon https://amzn.to/4rfv0giThe Unspeakable Truth shatters the carefully constructed illusions that have shaped human history for more than 5,000 years. In this groundbreaking work, researcher and UFO investigator Roderick Martin, published by 4biddenknowledge Inc., exposes how fake history, religious manipulation, and cultural conditioning have silenced African American voices in the global UFO and extraterrestrial conversation.Drawing from ancient texts, worldwide flood myths, megalithic monuments, suppressed archaeology, biblical reinterpretations, and global creation narratives, this book reveals a hidden past in which advanced extraterrestrial beings lived openly among humanity, influencing culture, science, and spiritual systems across the planet.Martin uncovers:• Lost global civilizations buried beneath cataclysmsMegastructures from Egypt, South Africa, Turkey, Peru, Easter Island, and North America point to an advanced world that existed over 11,000 years ago—long before mainstream history allows.• Encounters with giants, elongated skull beings, and hybrid humansDocumented skeletons and DNA anomalies from Peru, Malta, Asia, and the Americas suggest that humanity's early ancestors were more diverse—and more advanced—than we are told.• Star maps encoded into pyramids and monumentsGlobal sites align with Orion, Sirius, and the Pleiades, revealing a long-forgotten cosmic relationship between humans and star-born visitors.• How Christianity strategically rewrote extraterrestrial historyMartin investigates how the early church recast ancient “gods” and celestial beings as angels, demons, and biblical characters—rebranding extraterrestrial contact into religious doctrine to control populations.• The silenced UFO narratives of African and Native American communitiesCentered on Roderick Martin's personal journey from Southern Baptist upbringing to MUFON investigator, the book highlights why entire communities remain quiet about extraterrestrial contact—and why reclaiming these stories is crucial today.Why This Book Matters NowAs governments worldwide admit to UAP/UFO encounters, The Unspeakable Truth reconnects modern revelations to humanity's ancient origins. It breaks down race-based distortions, exposes manipulated history, and restores the rightful place of African Americans and Indigenous peoples in the global extraterrestrial story.Foreword written by six time best selling author Billy Carson.This is not just a book—it is a revelation, a reclamation, and a call to awaken.30 Day Free Trial Of 4biddenknowledge.TV 30 Day Free Trial On 4biddenknowledge.TVSupport the show

Available on Amazon https://amzn.to/4rfv0giThe Unspeakable Truth shatters the carefully constructed illusions that have shaped human history for more than 5,000 years. In this groundbreaking work, researcher and UFO investigator Roderick Martin, published by 4biddenknowledge Inc., exposes how fake history, religious manipulation, and cultural conditioning have silenced African American voices in the global UFO and extraterrestrial conversation.Drawing from ancient texts, worldwide flood myths, megalithic monuments, suppressed archaeology, biblical reinterpretations, and global creation narratives, this book reveals a hidden past in which advanced extraterrestrial beings lived openly among humanity, influencing culture, science, and spiritual systems across the planet.Martin uncovers:• Lost global civilizations buried beneath cataclysmsMegastructures from Egypt, South Africa, Turkey, Peru, Easter Island, and North America point to an advanced world that existed over 11,000 years ago—long before mainstream history allows.• Encounters with giants, elongated skull beings, and hybrid humansDocumented skeletons and DNA anomalies from Peru, Malta, Asia, and the Americas suggest that humanity's early ancestors were more diverse—and more advanced—than we are told.• Star maps encoded into pyramids and monumentsGlobal sites align with Orion, Sirius, and the Pleiades, revealing a long-forgotten cosmic relationship between humans and star-born visitors.• How Christianity strategically rewrote extraterrestrial historyMartin investigates how the early church recast ancient “gods” and celestial beings as angels, demons, and biblical characters—rebranding extraterrestrial contact into religious doctrine to control populations.• The silenced UFO narratives of African and Native American communitiesCentered on Roderick Martin's personal journey from Southern Baptist upbringing to MUFON investigator, the book highlights why entire communities remain quiet about extraterrestrial contact—and why reclaiming these stories is crucial today.Why This Book Matters NowAs governments worldwide admit to UAP/UFO encounters, The Unspeakable Truth reconnects modern revelations to humanity's ancient origins. It breaks down race-based distortions, exposes manipulated history, and restores the rightful place of African Americans and Indigenous peoples in the global extraterrestrial story.Foreword written by six time best selling author Billy Carson.This is not just a book—it is a revelation, a reclamation, and a call to awaken.

Nikki Glaser returns to talk orgasms, kids fucking teachers, phone addiction, her Sirius radio show YOU UP, and her love for MONSTER ENERGY drinks. Follow her on Instagram @nikkiglaser, @Adamraycomedy, @bradwilliamscomic & @alnpodcast   Learn more about your ad choices. Visit megaphone.fm/adchoices

STAYradio Episode #294 aired Friday November 21st, 2025. This episode features new music by Richard Vision, Freejack, Dj Snake, Don Diablo, Afrojack, R3hab, Tujamo, Steve Aoki, Nicky Romero, Alesso and many more!!

MAGA and America First is over :: Trump said Indians better workers than Americans :: Gerhard's new proposal for Grand Juries to use their full power in New Hampshire and beyond :: Is Candace Owens controlled op? :: Sarah uses her feminine wiles to get votes off the side of the road :: Give Taiwanese people citizenship to avoid WW3 :: Bonnie's story of getting kicked out of court in Massachusetts :: Drone wars :: Chemtrails and Jason's bill in NH House to end CT :: Skyglass :: TSA security theater :: Cops in jails the worst and least accountable :: The Egyptian planes following Charlie Kirk everywhere ::Jason says even as a state rep he had to go through lawyers :: Memetic warfare :: :: 2025-11-16 Hosts: Bonnie, Jason Gerhard, Angelo

FULL SHOW DESCRIPTION Renowned rock historian, producer, DJ, and author Denny Somach joins Metal Mayhem ROC to explore the newly updated 2025 edition of his classic book Get the Led Out: How Led Zeppelin Became the Biggest Band in the World, originally released in 2012. Denny recounts Zeppelin's journey from The New Yardbirds to worldwide domination, shares never-before-told stories from his decades in radio, and reveals how his infamous Howard Stern Show appearance reignited the “Stairway to Heaven” song-theft controversy. He discusses the Black Sabbath–Led Zeppelin jam rumor, the inside details of the Stairway lawsuit, and hints at unreleased Zeppelin live recordings that might finally see daylight. Somach also teases his latest project, Rock and Roll for Grown-Ups, and reflects on 50 years of chronicling rock history.

MAGA and America First is over :: Trump said Indians better workers than Americans :: Gerhard's new proposal for Grand Juries to use their full power in New Hampshire and beyond :: Is Candace Owens controlled op? :: Sarah uses her feminine wiles to get votes off the side of the road :: Give Taiwanese people citizenship to avoid WW3 :: Bonnie's story of getting kicked out of court in Massachusetts :: Drone wars :: Chemtrails and Jason's bill in NH House to end CT :: Skyglass :: TSA security theater :: Cops in jails the worst and least accountable :: The Egyptian planes following Charlie Kirk everywhere ::Jason says even as a state rep he had to go through lawyers :: Memetic warfare :: 2025-11-16 Hosts: Bonnie, Jason Gerhard, Angelo

Messages from the Galactic Council You Need to Hear - Channeling representatives from Sirius, Arcturus, Lyra, and Pleiades, Flo Karuna brings forward revelations about Earth's future. From timelines of disclosure to the role of starseeds and sound healers, this film unveils the cosmic blueprint guiding humanity's ascension. The Portal To Ascension platform is a resource for awakening to the truth of our existence while exploring the nature of reality and the cosmos. Our efforts are aimed at manifesting full disclosure of: • Humanity's ancient origins • The truth of the Extraterrestrial presence • The release of advanced technology • Transparency within business and global economic affairs • An understanding beyond our third dimensional perception Official website: https://portaltoascension.org/ Official Facebook Page: https://www.facebook.com/PortalToAscension/ Official Instagram Page: https://www.instagram.com/portaltoascension Official Twitter Page: https://twitter.com/p2ascension Official Telegram Chat Room: https://t.me/portaltoascension Join Our Rapidly Growing Mailing List: https://portaltoascension.org/sign-up/ Portal To Ascension Conferences: In Person: https://ascensionconference.com Online: https://portaltoascension.org/upcoming-events/ Also Find Us On : Spotify: https://open.spotify.com/show/3uolCCJknWQV9I3i07OZtC Apple Podcast: https://podcasts.apple.com/us/podcast/portal-to-ascension-radio/id1544194663

They offered initiation into ancient Christian mysticism, ritual communion with the spirits, an understanding of reincarnation, and the destined transition to inhabiting a "solar-body" in the Sirius star-system. But it all ended in murderous blood sacrifice and fire—and 74 dead believers. What is this dark preoccupation with sacrifice and ritual killing in the name of metaphysical belief? Grotesque to modern ears, yet quite commonplace historically. Julian covers the late 20th-century French cult, The Order of the Solar Temple, for his Roots of Conspirituality series. They identified with the Knights Templar, weaving Rosicrucianism and Theosophy into a tangled web of fraud, spiritual deception, and the dramatic, tragic deaths of everyone involved. Learn more about your ad choices. Visit megaphone.fm/adchoices

Podfic Text-to-Speech (TTS) reading of This Unwritten Future by imparfait Cover Art sorenphelps  Summary In October of 1981, three secret keepers flee Godric's Hollow in the middle of the night for parts unknown, but Sirius finds he's got more than one secret to carry when a one-night stand with Remus leaves him pregnant, alone, and in hiding. When the war ends a year and a half later and Remus finds Sirius again after his own exile in Mongolia, how will they piece together a life with a child thrown into the mix? Will they finally admit their feelings to each other? Creators imparfait | Tumblr | AO3sorenphelps | TumblrBurningAurora | Tumblr | AO3 | linktr.ee Kaleana | Tumblr | AO3  flowerhawk_highinthesky | Tumblr | AO3    R33sesPieces | Tumblr | AO3     

Andrew Wilkow (of The Wilkow Majority) says Zohran Mamdani's plans for NYC will end in disaster. Viva Frei goes off on Canada's forced slaughter of the Universal Ostrich Farm birds, which their government claimed was for “biosecurity and biocontainment protocols to mitigate the risk of spreading HPAI (Highly Pathogenic Avian Influenza)” despite objections from the farm's owners. Dr. Drew learned about gold, silver & retirement with Augusta – now it's your turn: https://drdrew.com/gold Andrew Wilkow is the host of The Wilkow Majority, airing weekdays on Sirius/XM Patriot 125. He began his radio career in college and rose to prominence after being hired by Sirius in 2006. Follow at https://x.com/WilkowMajority David Freiheit, known as Viva Frei, is an attorney and commentator who hosts The Viva Frei Show on Rumble and Locals. He cohosts Viva & Barnes Live with attorney Robert Barnes. Follow at https://x.com/TheVivaFrei 「 SUPPORT OUR SPONSORS 」 Find out more about the brands that make this show possible and get special discounts on Dr. Drew's favorite products at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://drdrew.com/sponsors⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠  • AUGUSTA PRECIOUS METALS – Thousands of Americans are moving portions of their retirement into physical gold & silver. Learn more in this 3-minute report from our friends at Augusta Precious Metals: ⁠https://drdrew.com/gold⁠ or text DREW to 35052 ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠• FATTY15 – The future of essential fatty acids is here! Strengthen your cells against age-related breakdown with Fatty15. Get 15% off a 90-day Starter Kit Subscription at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://drdrew.com/fatty15⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠ • PALEOVALLEY - "Paleovalley has a wide variety of extraordinary products that are both healthful and delicious,” says Dr. Drew. "I am a huge fan of this brand and know you'll love it too!” Get 15% off your first order at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://drdrew.com/paleovalley⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠ • VSHREDMD – Formulated by Dr. Drew: The Science of Cellular Health + World-Class Training Programs, Premium Content, and 1-1 Training with Certified V Shred Coaches! More at https://drdrew.com/vshredmd • THE WELLNESS COMPANY - Counteract harmful spike proteins with TWC's Signature Series Spike Support Formula containing nattokinase and selenium. Learn more about TWC's supplements at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://twc.health/drew⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠ 「 MEDICAL NOTE 」 Portions of this program may examine countervailing views on important medical issues. Always consult your physician before making any decisions about your health. 「 ABOUT THE SHOW 」 Ask Dr. Drew is produced by Kaleb Nation (⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://kalebnation.com⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠) and Susan Pinsky (⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://twitter.com/firstladyoflov⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠e⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠). This show is for entertainment and/or informational purposes only, and is not a substitute for medical advice, diagnosis, or treatment. Executive Producers • Kaleb Nation - ⁠⁠⁠⁠⁠https://kalebnation.com⁠⁠⁠⁠⁠ • Susan Pinsky - ⁠⁠⁠⁠⁠https://x.com/firstladyoflove⁠⁠⁠⁠⁠ Content Producer & Booking • Emily Barsh - ⁠⁠⁠⁠⁠https://x.com/emilytvproducer⁠⁠⁠⁠⁠ Hosted By • Dr. Drew Pinsky - ⁠⁠⁠⁠⁠https://x.com/drdrew⁠⁠⁠⁠⁠ Learn more about your ad choices. Visit megaphone.fm/adchoices

He's the man behind the afternoon voice on Sirius XM's 70's at 7. JAYBEAU JONES' love and appreciation for music goes well beyond being a radio personality. His "Music Drives Us" podcast features some of the greatest voices in music history has featured amazing guests like Mickey Dolenz (of the Monkees), actor Keifer Sutherland, Russell Hitchcock (of Air Supply) and so many others who talk about how music has made their lives what they are today. Jaybeau also has stories from behind the microphone, including radio station promotions gone wrong and the great story of filling in for Rick Dees on the Rick Dees Weekly top 40 (That story is worth the whole show!) If you're a fan of radio personalities or Sirius 70's at 7, this is a must listen! Hosted by Simplecast, an AdsWizz company. See pcm.adswizz.com for information about our collection and use of personal data for advertising.

Epstein files released by House dems but not serious ones :: Caller points out AI is so good there's no way to really know if something like a document is faked :: Trump to permit 50 year mortgages and portable mortgages :: Internet slop may push people into the real world :: Bonnie and Riley's experiences with comparing themselves to others online :: US to go to war with Venezuela? :: Mayor of Albuquerque in favor of state-run grocery stores :: Fire departments can be run by the free market :: Turd wants men to be more like Humphrey Bogart :: Trump hard to figure out. He doesn't make sense even to his own agenda :: Ways Trump has followed Project 2025 :: Trump blew up boats with Venezuelan kids on board :: Three reasons Mamdani's state-run grocery stores wont work :: 2025-11-15 Hosts: Bonnie, Riley O'Bill

Astrologer and consciousness teacher Mercedes Arnús Arraut explains how astrology and the star chart reveal a hidden design connecting human destiny, awakening consciousness, and the rise of technology in episode 225 of Far Out with Faust.Mercedes Arnús Arraut is an astrologer, consciousness teacher, and founder of The Astral Method, an education platform that bridges Hellenistic, Egyptian, and Vedic astrology with modern psychology and energy work. She guides students in reading their natal chart blueprint as a mirror of consciousness — a map of patterns, ancestral memory, and potential. Her teachings restore astrology's original purpose: a tool for self-knowledge and spiritual awakening.In this conversation, Faust Checho and Mercedes trace astrology's origins and its modern evolution, exploring how the star chart decodes both personal and collective destiny. They examine Carl Jung's insight that “until you make the unconscious conscious, it will rule your life,” and connect that idea to ancient cosmology and today's rise of AI and ChatGPT. Mercedes discusses how Emperor Constantine and the Catholic Church severed humanity's link to the stars, how civilizations like Atlantis fell when they misused technology, and why dream journaling can reopen a channel to higher awareness. Together they uncover how cosmic patterns, free will, and consciousness intertwine in the unfolding story of humanity's evolution.In this episode:

Shawn Tierney meets up with Mark Berger of Siemens to learn how Siemens integrates SIRIUS ACT devices (push buttons, selector switches, pilot lights) with PROFINET in this episode of The Automation Podcast. For any links related to this episode, check out the “Show Notes” located below the video. Watch The Automation Podcast from The Automation Blog: Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 253 Show Notes: Special thanks to Mark Berger of Siemens for coming on the show and sending us a sample! Read the transcript on The Automation Blog: (automatically generated) Shawn Tierney (Host): Thank you for tuning back in to the automation podcast. My name is Shawn Tierney from Insights. And today on the show, we have a special treat. We have Mark Berger back on from Siemens to bring us up to speed on serious act. He’s gonna tell us all about the product, and then we’re even gonna do a small demo and take a look at it working live. So with that said, let’s go ahead and jump into this episode with Mark Burger from Siemens and learn all about their push buttons on PROFINET. Mark, it’s been a while since you’ve been on the show. Thank you for coming back on and agreeing to talk about this. Mark Berger (Siemens): Oh, thank you so much. I truly appreciate you letting me be on. I appreciate your channel, and I enjoy watching it. And I’m excited to show you some of this great technology. So I’ve got, the PowerPoint up here. We’ll just do a simple PowerPoint to kinda give you an overview, and then we’ll dive into the hardware. Shawn Tierney (Host): Appreciate it. Thank you. Mark Berger (Siemens): No problem. So as we stated, the Sirius X over PROFINET, let me emphasize that, the, actuators, the push buttons, the estops, the selector switches, they are all standard, when you use these. So if you have those on the shelf, the only thing that PROFINET does is that it adds, removes the normal contact blocks and adds the PROFINET, terminal blocks on the back. So every all the actuators that we’re showing are just standard actuators for the 22 millimeter push button line. So easy to use, modern design, performance and action, and extremely rugged and flexible. The, 22 millimeter is out of the box IP 69 k, which for those who are maybe in the food and beverage, verticals would understand what that is. And that’s for direct hose down, wash down, able to handle a high pressure washing and not able to leak past the actuator into the panel. So IP 69 k is a a great place for dust and wash down and hosing and where you’re having rain and so forth, to be able to protect for a keep of any, water passing into the panel. So introduction wise, it’s, the PROFINET push buttons for us. It it is, again, the same actuators, the same, connections, and so forth, but what we’re going to exchange is the terminal blocks, for it. So on there, I stated it’s, IP 69 k is standard. You don’t need any, extra covers forward or anything to fulfill that requirement, But it’s, it’s insensitive to dust and oil and caustic solutions, you know, like citric acid where you’re hosing down some stainless steel parts and so forth. Now what we have here is, changing out the terminal blocks that have wiring. So usually on a push button, you have two wires coming in, and then you have, for illuminated, you have two wires coming in and so forth and going out. And after you have 20 or 30 push buttons or 10 or 15 push buttons, you’ve got a substantial little bit of wiring or cabling that will be passing from the door over into the main cabinet of your control cabinet. What we’re going to do with PROFINET push buttons is we’re going to eliminate all that wiring. And then in addition, eliminate the input and output cards that you will need for your PLC and take it down to a pro, Ethernet cable, an r j r j 45 cable, and then down to a 24 volts. And that’s all that will pass from the cabinet onto the door where you’re mounting your push buttons. So, huge, safe and cost of wires. We’re reducing all the wire outlay. And, you know, back in the day when I build panels, it was an art how you got all the wires all nice and pretty and got them laid out and wire tied them down and so forth and just made the a piece of art on the backside. And then, it it was all done. You got it all wired. And then, of course, there was somebody that said, hey. We forgot to add another selector switch. So you had to go back and cut all that stuff and redo the whole layout and so forth. So with PROFINET, it’s extremely flexible and easily, to adapt to if you need something, more because you’re not taking all that wiring back to the panel, passing it across the hinge of the door and so forth. It is also with a safety PLC. You do have PROFIsafe, so we can do estops on the door as you can see here in the picture, but then we can do non safe applications also. So today, we’ll be just doing some non safe applications. And then the communications again is PROFINET. But then also just to touch real quick, we do have it on IO Link and on Aussie with our push buttons. So what is SiriusACT with PROFINET? There we go. So what you have is the first, block or interface module that you put on the back of your push button, that’s where the, Ethernet is plugged into and your 24 volts is plugged into. And then after that, subsequently, then the push buttons that you have is that you have what we call a terminal module. And in between the, the interface module to a terminal module or from terminal module to terminal module, you can go up to one meter of cabling, and it’s a ribbon cable. And we’ll show that here shortly. And then if you have up to we can do up to 20 push buttons, terminal modules, with a total of 21 push buttons. And then so from the first interface module all the way to the last push button, you can go up to 10 meters. And then it gives, again, 24 volt power supply for it. And we have, again, as I stated, as nonsafe, talking just PROFINET, and then the safety version, talking PROFISAFE on PROFINET. So serious act, we can go up on the the safety up to seal three and performance level e as an echo. We have, again, the the standard interface module without safety. You have the PLC, the interface module, and then the subsequent terminal modules for it. And then the cabling that goes from the interface module to out to the terminal modules is a simple ribbon cable that comes into the back of the terminal modules. The only tool that you need is simply it’s just a screwdriver, and, you, push it into the terminal module, push down. It uses, vampire connections, insulation displacement, vampire connections, and you push it down in. There’s no stripping of the wires. There’s no mix up. The indicator you can see on the wires here in a minute will show you that there’s a little red line that shows you, which way it, enters into the terminal, and then that’s it. It’s very straightforward. It’s, very simple with tools. And, as I stated, it’s, just like a normal push button that you’d put on, but then we’re gonna add, remove the contact block and add the terminal module or the interface module in the place of the contact block. Just to emphasize again, we can do PROFISAFE on, with a safety PLC and a safety controller, and we can give you all the safety, requirements for the either the ISO or the IEC specifications for safety out there in the field. Here’s some of the part numbers. First one, of course, is the interface module, and that has the ability to do PROFIsafe. It has also, additionally, four digital inputs, one digital output, and then one analog input. And we’ll talk about that a little bit more just in a few minutes. And then the non safe version, 24 volts. You have a, two versions of this one, one with just with just a standard, 24 volts input, but then there’s an additional one that has the four digital in, one digital out, and one analog in. So there’s two different part numbers. One where you don’t need the additional, digital inputs and outputs and analog, and then the and then the part number with the the additional inputs and outputs. But the safety one comes there’s no other version, just the one. Then you have what we call the terminal modules, and there’s three versions. One terminal module is just the command module only. It’s mounted with two mechanical signaling blocks to signal. So you have two contact blocks built in. Then you have one that’s a terminal module with the command, the terminal blocks, and then also an integrated LED. And then you can put what color you want the LED to be, and you can see there the the part number changed for red, blue, amber, so on. And then you have a just an LED module to where it’s no contactors. It’s just LED. And, I think with our demo we’re gonna show today, we’re just gonna show the contact block and LED module and only the LED module today. There’s some other, accessories with the safety. There’s a memory module to where that you, is all the configurations are put into the memory module, and something happens to that interface module. Everything’s put in there, the IP address, the configuration, and everything. If something gets broke and so forth or you have to replace it, you pull the memory module out, put the new terminal or interface module in, plug in the memory module, cycle the power, and it’s up and running. All the configurations, the IP address, everything’s already there. And then on the interface module, it does not come with an LED, so you’re required to buy this this, LED right here if you need it for it, and that’s what you use for the interface module. And then, of course, the ribbon cable that goes between the interface module to the terminal block or terminal module and terminal module and so forth come in five meter length and 10 meter length. K. So what’s it provide for you? Well, the benefits are, I’ll I’ll be very blunt. If it’s just one or two buttons on a panel, it won’t be that cost effective. Yes. We’re reducing the IO, the IO inputs and outputs, but for the savings, it’s not the best. Now when you get up to about three or four push buttons, then that cost saving is, very realized. Now when you go up to 20 push buttons, yes, you’re saving a lot of money, especially in the IO cards that you’re not gonna be required to have. And then, of course, all the wiring and the labor, getting it all wired up and doing all the loop checks to make sure that when you push this button, it’s wired into the right terminal block on the IO card, so on and so forth. So about, the break is about two to three push buttons to where it will become very cost effective for you to use it. But like I said yesterday, without PROFINET push buttons, it was all the wiring you brought across and putting them into all your IO cards and so forth. And now with PROFINET push buttons, all that goes away, and all you’re bringing across is an Ethernet cable and 24 volts positive and 24 volts negative across that hinge into the door. And that’s it. K. And then emphasizing again, we can do PROFIsafe and those, push buttons and estops. The estop can be part of your safety circuit and give you the, safety levels that you’re required from either sill and or performance level safeties depending on the specification, IEC, or ISO that you’re following within your plant. K? And then hardware configuration. Now this is where we step into reduction of engineering and helping you guys get going, quicker and making sure engineering is done properly. You know, back in the day, we’d wire up all the wires, coming from the push buttons, you know, a selector switch, a start button, stop button, indicator lights, and so forth. And and all those wires sometimes just, you know, the what we’re working with, all the wires look the same. You’ve put labels on them. You may have labeled it wrong, and you wired into an input card or an output card. So there’s some time where you’re over there doing some loop checks where you’re trying to say, yes. That’s coming into input byte dot bit, and that should be the selector switch. Well, with the PROFINET push buttons, we’re able to not have to worry about that, and we’re gonna demonstrate that just here in a minute. But you also have a full lineup of the push buttons coming into portal so that you can see the lineup and verify that it is the parts that you want. In TI portal, you can see that, of course, the first, button is the interface module, and then sequentially is the terminal modules that have either just contactors, LED and contactors, or just LEDs. And we’ll we’ll show that just here momentarily. But it’s all integrated into TIA portal. It has a visual representation of all the push buttons, and it’s simple and fast, to, configure. We’ll show you that here in just a moment. And there’s no addressing, for it. So some of the stuff that you have out there, you have addressing, making sure what the address is right, and so on. This is a standardized data management, and it’s extremely time saving and engineering saving for, the user. Shawn Tierney (Host): Well, let me ask you a question about that. If the snow addressing, do the items show up, in the order that they’re wired? In other words, you know, you’re daisy chasing the you’re you’re going cable to cable from device to device. Is that the order that they show up? Mark Berger (Siemens): That’s exactly right. Shawn Tierney (Host): Okay. Mark Berger (Siemens): So if you don’t know which ones are what, you just literally put run your hand from the interface module, follow that cable, and the next one that will be visually saw in portal will be the one that it lands on first. Perfect. And then there’s a cable that leaves that one and goes into the next one, daisy chained, and then that’s what’ll be represented in that lineup. And here in just a minute, we’ll we’ll show that. Alright. Thank you for that question. Okay. Now once I got it wired up, how do I know that I got it wired properly? And we’re gonna show that here in just a minute. But just graphically wise, you have the ability to see if it is all wired up. You do not need to plug it into the PLC. This all it needs is 24 volts. The PLC can come later and plugging it in later and so forth. There’s no programming. This all comes out of the box. So once you plug it in, if all on the backside looking at the terminal blocks and the daisy chain ribbon cable, if it’s all green, you wired it up properly, and it’s working properly. But then if you see a red light flashing either at the terminal module because that will that will bubble up to the terminal module. So if you have a problem somewhere pardon me, the interface module. If you have some problem with the terminal modules, a push button like number two or three or four, it will bubble up into the, interface module to let it know, hey. We got a problem. Can you look to see where it’s at? And as you see here, we have maybe a device that’s defective. And so it bubbles up into the interface module to let you know, and a red light lets you know that we have maybe a defective module. You know, something hammered it pretty hard, or, it may have been miswired. Then the second one down below, we’ve got a wiring error to where you don’t have the green lights on the back and everybody else’s there’s no green light shown. That means you have a wiring error. Or if everything works great, it’s green lights across, but then the next level of this is is my push button working? So then we you’ll push or actuate the push button or actuate the selector switch, and the green light will flash to let you know that that terminal module or interface module is working properly. And we’ve done our our, loop checks right there before we’ve even plugged it into the PLC or your programmer has come out and sat down and worked with it. We can prove that that panel is ready to roll and ready to go, and you can set it aside. And if you got four or five of the same panel, you can build them all up, power it up, verify that it’s all green lights across the board. It is. Great. Set it down. Build up another one and go on from there. So it shows you fast fault detection without any additional equipment or additional people to come in and help you show you that. When we used to do loop checks, usually had somebody push the button, then yell at the programmer, hey. Is this coming in at I zero dot zero? Yeah. I see it. Okay. Or then he pushed another one. Hey. Is this coming in on I 0.one? No. It’s coming in on i0. Three. So there was that two people and then more time to do that loop check or the ring out as some people have called it. So in this case, you don’t need to do that, and you’ll see why here in just a minute. And then, again, if we do have an interface module that, maybe it got short circuited or something hit it, it you just pull the ePROM out, plug it into the new one, bring in the ribbon cable, and cycle the power, and you’re up and running. Alright. And then this is just some of the handling options of how it handles the data, with the projects and so forth, with basic setups, options that you can be handling with this, filling bottles. What we wanna make sure to understand is that if maybe push buttons, you can pick push buttons to work with whatever project you want it to do. So if you have six push buttons out there, two of them are working on one, bottle filling, and then the rest of them are working on the labeling, you can separate those push buttons. Even though that they’re all tied together via PROFINET, you can use them in different applications across your machine. Shawn Tierney (Host): You’re saying if I have multiple CPUs, I could have some buttons in light work with CPU one, PLC one, and some work with PLC two? Mark Berger (Siemens): Yep. There’s handling there. There’s programming in the backside that needs to be done, but, yes, that can happen. Yep. Oh, alright. So conclusion, integrated into TI portal. We’re gonna show that here in a minute. So universal system, high flexibility with your digital in, digital outs, analogs, quick and easy installation, one man, one hand, no special tooling, and then substantially reducing the wiring and labor to get it going. And then, again, integrated safety if, required for the your time. So with that, let’s, switch over to TI portal. So I’ve already got a project started. I just called it project three. I’ve already got a PLC. I’ve got our, new g, s seven twelve hundred g two already in. And then what I’m gonna do is I’ve, already built up the panel. And, Shawn, if you wanna show your panel right here. Shawn Tierney (Host): Yeah. Let me go ahead and switch the camera over to mine. And so now everybody’s seeing my overhead. Now do you want me to turn it on at this point? It’s off. Yeah. Yeah. Mark Berger (Siemens): Let’s do it. Shawn Tierney (Host): Gonna turn it on, and all the lights came on. So we have some push buttons and pilot lights here, but the push buttons are illuminated, and now they’ve all gone off. Do you want me to show the back now? Mark Berger (Siemens): Yep. So what we did there is that we just showed that the LEDs are all working, and that’s at the initial powering up of the 24 volts. Now we’re gonna switch over and, you know, open up the cabinet and look inside, and now we’re looking on the backside. And if you remember in the PowerPoint, I said that we’d have all green lights, the everything’s wired properly. And as you look, all the terminal modules all have green lights, and so that means that’s all been wired properly. If you notice, you see a little red stripe on the ribbon cable. That’s a indication. Yep. To show you that. And then if you look on the on the out on the, the interface module, Shawn, there’s it says out right there at the bottom. Yeah. There’s a little dot, and that dot means that’s where the red stripe goes, coming out. So that little dot means that’s where the red stripe comes. Yep. Right there. And that’s how it comes out. And then if you look just to the left a little bit, there’s another, in, and there’d be a red dot underneath that ribbon cable showing you how the red the the red goes into it. Notice that everything’s clear, so you can see that the wire gets engaged properly all the way in. And then all you do is take a screwdriver and push down, and then the vent, comes in. The insulation displacement comes in and, and, makes the connections for you. So there’s no strip tie cable stripping tools or anything special for doing that. Another item, just while we’re looking, if you look in the bottom left hand corner of that terminal module, you see kind of a a t and then a circle and then another t. That’s an indicator to let you know that that’s two contactors and an LED that you have on the backside. Shawn Tierney (Host): We’re talking about right here? Mark Berger (Siemens): Yep. Yep. Right there. Shawn Tierney (Host): Okay. Mark Berger (Siemens): So that’s an indicator to tell you what type of terminal block it is a terminal, block that it is. That’s two contactors and LED. And then if you look at one in the bottom left hand corner, there’s just a circle. That means you just have an LED. So you have some indicators to show you what you’re looking at and so forth. So today, we’re just using the two, LED only, and then we’re doing the contactor and LED combination. I I don’t have one there on your demo that’s just the contactor. So Shawn Tierney (Host): Now you were telling me about these earlier. Yeah. Mark Berger (Siemens): So yeah. The so if you look there on that second row of the terminal blocks, you have a UV and an AI, and I’ll show that in the schematic here in just a little bit, but there, that is a 10 volt output. If you put a 250 ohm or 250 k ohm, potentiometer and then bring that signal back into AI, you have an analog set point that comes in for it that will automatically be scaled zero to 1,000 count or zero to 10 volts. Mhmm. And then you can use that for a speed reference for a VFD. And it’s already there. All you have to do, you don’t have to scale it or anything. You can put it towards, you know, okay. Zero to 1,000 count means zero to 500 PSI or or zero to 100 feet per second on a conveyor belt, and I’m I’m just pulling numbers out. But that’s the only real scalability scaling you have to do. So it’ll be a zero to 1,000 count is what you’ll see instead of, like, yep. Then you got four digital ins that you can use and then a one digital out. Now the four, I, kinda inquired wife just four, but let’s say that you have a four position joystick. You could wire all four positions into that interface module, and then the output could be something else for a local horn that you want or something to that case with it. So you in addition to the, push buttons, you also have a small, distribution IO block right there in the in your panel. Shawn Tierney (Host): Which is cool. Yeah. I mean, maybe yeah. Like you said, maybe you have something else on the panel that doesn’t fit in with, you know, this line of push buttons and pilot lights like a joystick. Right? And that makes a lot of sense. You were saying too, if I push the button, I can test to see if it’s working. Mark Berger (Siemens): Correct. So if you yep. Go right ahead. Shawn Tierney (Host): I’m pushing that middle one right there. You can see it blinking now. Mark Berger (Siemens): And that tells you that the contacts have been made, and it’s telling you that the contacts work properly. Shawn Tierney (Host): And now I’m pushing the one below it. So that shows me that everything’s working. The contacts are working, and we’re good to go. Mark Berger (Siemens): Yep. Everything’s done. We’ve done the loop checks. We know that this is ready to be plugged into the PLC and handed off to whomever is going to be, programming the PLC and bring it in, in which means that we’ll go to the next step in the TI portal. Shawn Tierney (Host): Yeah. Let me switch back to you, and we’re seeing your TI portal now. Mark Berger (Siemens): Awesome. Okay. So I’ve got the PLC. I’ve plugged it in to if if I needed an Ethernet switch or I’ve plugged it directly into the PLC. Now I have just built up that panel. I haven’t had anything, done with it for an IP address because it is a TCP IP protocol. So we need to do a IP address, but it’s on PROFINET. And then I’m gonna come here to online access, and I wanna see that I can see it out there that I’m talking to it. So I’m gonna do update accessible devices. It’s gonna reach out via my, Ethernet port on my laptop. And then there’s our g two PLC and its IP address. So that’s that guy right here. Mhmm. And then I have something out there called accessible devices, and then this is its MAC address. So what I and I just have those two items on the network, but, you know, you could have multiples as, you know, with GI portal. We can put an entire machine in one project. So I come here and drop that down, and I go to online diagnostics. I I go online with it, but I don’t have really a lot here to tell me what’s going on or anything yet. But I come here, and I say assign IP address. And I call one ninety two, one sixty eight, zero zero zero, and zero ten zero, and then our usual 255, two fifty five, two fifty five, and then I say assign IP address. Give it a second. It’s gonna go out and tell it, okay. You’re it. Now I wanna see if it took, and you look right there, it took. And I’m I’m kinda anal, so I kinda do it again just to verify. Yep. Everything’s done. It’s got an IP address. Now I’m gonna come up, and I’m going to go to my project, and I’m gonna switch this to new network view. Here’s my PLC. I’m gonna highlight my project. Now there’s two ways I can go about it, and I’m sure, Shawn, you’ve learned that Siemens allows you to kinda do it multiple ways. I could come in here and go into my field devices, and I could come into my commanding and interface modules, and I’d start building my push button station. But we’re gonna be a little oh and ah today. We’re gonna highlight the project. I’m gonna go to online, and I’m gonna come down here to hardware detection and do PROFINET devices from network. Brings up the screen to say, hey. I want you to go out and search for PROFINET industrial Ethernet. Come out via my, NIC card from my laptop, and I want you to start search. Shawn Tierney (Host): For those of you who watched my previous episodes doing the e t 200 I o, this is exactly the same process we used for that. Mark Berger (Siemens): Yep. And I found something out there that I know I gave the IP address, but it doesn’t have a PROFINET name yet. So that’s okay. I’ve I got the IP address. We’ll worry about the PROFINET name. So we’ll hide check mark this, and this could be multiple items. Shawn Tierney (Host): Mhmm. Mark Berger (Siemens): K. So now add device. Shawn Tierney (Host): And this is the sweet part. Mark Berger (Siemens): And right here, it’s done. It went out, interrogated the interface module, and said, okay. Are you there? Yep. I’m here. Here’s my IP address. And it also shared with it all of come in here, double click on it now. Shawn Tierney (Host): The real time saver. Yep. Mark Berger (Siemens): Yep. And then now here’s all the push buttons in your thing. And let me zoom that out. It’s at 200%. Let’s go out to a 100. And now it already interrogated the interface module and all the terminal modules to tell me what’s in my demo. Yep. And again, as you stated in your questions, how do I know which one’s the next one? You just saw the ribbon cable Mhmm. And then it brings you so forth and so on. So that’s done. We’re good. I’m gonna go back to my network view, and I’m gonna say, hey. I want you to communicate via PROFINET to there, which I’m done. And then it also gives you here’s the PLC that you’re gonna do because, you know, if we have a big project, we may have four or five of these stations, and you wanna know which PLC is the primary PLC on it. And then we’ve done that. I’m going to quickly just do a quick compile. And next, I’m gonna come here. I’m gonna click here. Now I could just do download and and let the PROFINET name, which is here, go into it. But I’m gonna right click, and I’m gonna say assign device name and say update list. It’s gonna go interrogate the network. Takes a second. No device name assigned. No PROFINET name. So this is how we do that time determinism with PROFINET. So I’m gonna highlight it, and I say assign the name, and it’s done. Close. So now it has a PROFINET name and IP address. So now I’m able to go in here and hit download and load. And we’re going to stop because we are adding hardware, so we are putting the CPU in stop and hit finish. Now I always make sure I’m starting the CPU back up and then hit finish. And then I’m gonna go online, go over here and show network view, and go online. And I got green balls and green check marks all over the board, so I’m excited. This works out. Everything’s done. But now what about the IO? So now your programmer is already talking to it, but now I need to know what the inputs and outputs are. So go back offline, double click here, and then I’m gonna just quickly look at a couple things. The interface modules IO tags are in a different spot than the terminal modules. So just a little note. It’s right here. If you double click on integrated I LED, you click here and then go to properties and say IO tags. There it lists all of the inputs and outputs. So it comes here. But if I do a terminal module, click here, then once you just click on it in general oops. Sorry. In general, it’s right here in the IO addressing. There’s where it starts start the bytes, but then I come here to tags, and then here’s the listing. So the the the programs automatically already allocated the byte and the bit for each of these guys. So if I click there, there, click there, there’s it there, onward and upward. Now notice that the byte so if I click on position four, it is three. So it’s one one less because the base zero versus here, it’s five. Just give me a little bit of a so if you look in here, all that starts at I four dot zero. I four dot zero. So k. So that’s there. So I’m gonna come here. I’m gonna go to the selector switch for this, and I’ve called it s s one, and that’s input two dot zero. Then I’m gonna click here, and I’m gonna call this green push button. Notice there’s two inputs because I have one contactor here, one contactor there, and 30 and 31. So then what I’m gonna do is that I’m going to go over here to the PLC, and I’m gonna go to and it’s updated my PLC tag table. There you go. It’s in there. So then I’m gonna grab that guy. I’m gonna because portal pushes you to use two monitors. I’m gonna come here, go to the main OB, and then I’m gonna just grab a normally open contact, drag it on, drop it, put it in there we go. And then I’m gonna grab selector switch and drop that right there, and grab green LED and drop that right there, and then close that out and compile. And everybody’s happy. I’m gonna download and say yes. Okay. And then I’m gonna go online. Alright. So it’s waiting in for me to switch that, and there you go. And if you wanna see my screen there, Shawn, that’s the green light is turned on. Shawn Tierney (Host): Yeah. Let me switch over to Okay. Bring up your, alright. And could you switch it back off now? Mark Berger (Siemens): Yeah. No problem. Yep. So there we go. We switch it off. We switch it on. Now I wanna show you something kinda cool. If I turn that off and I come back here and I go offline Mhmm. I have a indicator light that needs to flash to let the operator know that there’s something here I need you to attend to. So we used to put in some type of timer. Right? Mhmm. Shawn Tierney (Host): Mhmm. Mark Berger (Siemens): And so what we would do here instead of that, I’m gonna come back down here to my tab and go to the hardware config. I’m gonna double click here. I’m gonna go to module parameters, and I’m gonna drop this down, and I’m gonna put it at two hertz. Also, just to point out, I can also do a normally open contact and a normally closed contact and switch them. You see right here. Cool. And I can control the brightness of the LED if it has an LED, and it’s all hard coded into it. So once I’ve done that, do a quick compile. I’m I mean, you know, I’ve always compile and then do download. Mhmm. Mhmm. So we’re gonna download that and hit load and finish. K. Here we go. Turn that on, and now it’s flashing. Shawn Tierney (Host): That’s great. So you have a timer built in. If you need to flash, you don’t have to go get a clock bit or create your own timer. Plus, if it’s a button, you can change the contacts from normally open to normally closed. That is very cool. Mark Berger (Siemens): Yep. And that is PROFINET push buttons. As I stated let me quickly pull that up. Remember, you pointed out just a few minutes ago, here is the wiring diagram for that. So here’s the back of that with the terminal blocks. And you come down here, and it shows you that you just wire in that, variable resistor or a potentiometer. And you see m and you there’s the 10 volts, and then the signal comes into a. And then that guy is right here. Excellent. So if you come here, you go to properties and IO tags, and it comes in on I 60 fours and input and IO tags, and then I could call that a pot. Yeah. And now you have a potentiometer that you can use as a a speed reference for your VFD. That is very cool. Engineering efficiency, we reduced wiring. We don’t have all the IO cards that is required, and we have the diagnostics. Emphasize that each of these here, their names, you can change those if you would like because this is your diagnostic string. So if something goes wrong here, then it would come up and say commanding. So you double click here, and we go here to general, and it’ll say commanding and underscore LED module two, or you can you can call that start conveyor p b. And then that would change this. Now see this changed it. This would be your diagnostic string to let you know if if that button got damaged or is not working properly. Shawn Tierney (Host): You know, I wanted to ask you too. If I had, let’s say I needed two potentiometers on the front of the enclosure, could I put another interface module in the system? Even if it didn’t have any push buttons on it or pilots on it, could I just put it in there to grab, some more IO? Mark Berger (Siemens): Yep. Yes, sir. I have a customer that he uses these as small little IO blocks. Shawn Tierney (Host): Yeah. I mean, if you just needed a second pot, it might make sense to buy another interface module and bring it into that than buying an analog card. Right? Assuming the resolution and everything was app you know, correct for your application, but that’s very cool. I you know, it it really goes in line with all the videos we’ve done recently looking at e t 200 I o, all the different flavors and types. And when you walk through here, you know, I’m just so especially, thankful that it reads in all the push buttons and their positions and pilot lights. Because if you have this on your desk, you’re doing your first project, you can save a lot of dragging and dropping and searching through the hardware catalog just by reading it in just like we can read in a rack of, like, e t 200 SPIO. Mark Berger (Siemens): Yep. Engineering efficiency, reducing wiring, reducing time in front of the PC to get things up and running. You saw how quickly just a simple push button and a and, you know, again, a simple start and turn that on and off the races we went. Shawn Tierney (Host): Well, Mark, I really wanna thank you. Was there anything else that we wanted to cover before we close out the show? Mark Berger (Siemens): Nope. That’s just about it. I think, we got a little bit to have your your viewers, think about for it. So I appreciate the time, and I really appreciate you allowing me to show this. I think this is a a really engineering efficiency way of going about using our push buttons and and, making everybody’s projects in a timely manner and getting everything done and having cost savings with it. Shawn Tierney (Host): Well, and I wanna thank you for taking the time out of your busy day, not only to put together a little demo like you have for me to use here in the school, but also to come on and show our audience how to use this. And I wanna thank our audience. This was actually prompted from one of you guys out there at calling in or writing in. I think it was on YouTube somewhere and saying, hey. Could you cover the PROFINET push buttons from Siemens? I didn’t even know they had them. So thanks to the viewers out there for your feedback that helps guide me on what you wanna see. And, Mark, this would not be possible if it wasn’t for your expertise. Thank you for coming back on the show. I really appreciate it. Mark Berger (Siemens): Thank you, Shawn. All the best. Thank you. Shawn Tierney (Host): I hope you enjoyed that episode. And I wanna thank Mark for taking time out of his busy schedule to put together that demo and presentation for us and really bring us up to speed on Sirius X. And I wanna thank the user out there who put a comment on one of my previous videos that said, hey. Did you know Siemens has this? Because I wouldn’t have known that unless you said that. So thank you to all you. I try to read the comments every day or at least every two days, and so I appreciate you all wherever you are, whether you’re on YouTube, the automation blog, Spotify, iTunes, Google Podcasts, and wherever you’re listening to this, I just wanna thank you for tuning in. And now with next week being Thanksgiving, we’ll have a pause in the automation show, then we have some more shows in December, and we’re already filming episodes for next year. So I’m looking forward to, releasing all those for you. And if you didn’t know, I also do another podcast called the History of Automation. Right now, it’s only available on video platforms, so YouTube, LinkedIn, and the automation blog. Hopefully, someday we’ll also do it on, audio as well. But, we’re meeting with some of the really legends in automation who worked on some of the really, you know, just really original PLCs, original HMIs, up and through, like, more modern day systems. So it’s just been a blast having these folks on to talk about the history of automation. And so if you need something to listen to during Thanksgiving week or maybe during the holidays, check out the history of automation. Again, right now, it’s only available on YouTube, the automation blog, and LinkedIn, but I think you guys will enjoy that. And I wanna wish you guys, since I won’t be back next week, a very happy Thanksgiving. I wanna thank you always for tuning in and listening, and I also wanna wish you all good health and happiness. And until next time, my friends, peace. Until next time, Peace ✌️  If you enjoyed this content, please give it a Like, and consider Sharing a link to it as that is the best way for us to grow our audience, which in turn allows us to produce more content

TRACKLIST: 01. lost.empathy - chance meeting 02. hozuki, SOULIFY — death is tired of waiting 03. insensible, Jay Karin - after all im not alone 04. 120days - i want to forget 05. Sirius X - Days Go By 06. Moook - Past and Present 07. ID10, Genie Cassini - deserve all of this 08. Antent — weakness 09. Antent, Genie Cassini — let me warm you 10. HXRI!ZON, lone yme, nleave - the last train 11. diedlonely, énouement — when we disappear 12. AUXEAN - Heliosphere (Ambient) 13. inalery - how it used to be 14. Moook - Emberflow 15. Chilly Holliday - luvair 16. vowl., Antent — broken 17. Tor Lundvall - Dark Spring 18. Mark Barrott - Looking Through The Mirror Of The Soul (Chihei Hatakeyama Extended Remix) 19. LXGIØN, brndoom - i miss you 20. diedlonely - memories of you 21. Snow In March - Nightfall 22. diedlonely, leadwave, ihatemyjob - cessation 23. Chilly Holliday - lost to dream 24. diedlonely, Etsu — you're not the same 25. Notan Nigres - One Last Time 26. a vow - foggy skies 27. Notan Nigres - Lost Soul 28. pxlse., ascxnd — this place feels familiar 29. 120days - together 30. Unnholy — left behind 31. for home use only, Houle - mystica ▶ band.link/AmbientPlanet Если вам понравилась музыка, оставьте свой комментарий, а также можете поддержать проект по ссылке: pay.cloudtips.ru/p/a811f671 ______ Ambient Planet Broadcast, авторские сеты проекта Sirius X (диджея и музыканта M.Pravda). Сборник уникальной музыки и эксклюзивных треков в стиле Ambient и Chill Out. ______ #siriusx #ambient #chillout #chill #relax #meditation #drone #chillstep #mpravda #ambientplanet #backgroundmusic #workmusic #focusmusic #chillmusic #concentrationmusic #chillmix #relaxing #studymusic #musicforstudying #deepfocus #productivitymusic #calmmusic #pianomusic #deepfocusmusic #codingmusic #relaxingmusic 01. lost.empathy - chance meeting 02. hozuki, SOULIFY — death is tired of waiting 03. insensible, Jay Karin - after all im not alone 04. 120days - i want to forget 05. Sirius X - Days Go By 06. Moook - Past and Present 07. ID10, Genie Cassini - deserve all of this 08. Antent — weakness 09. Antent, Genie Cassini — let me warm you 10. HXRI!ZON, lone yme, nleave - the last train 11. diedlonely, énouement — when we disappear 12. AUXEAN - Heliosphere (Ambient) 13. inalery - how it used to be 14. Moook - Emberflow 15. Chilly Holliday - luvair 16. vowl., Antent — broken 17. Tor Lundvall - Dark Spring 18. Mark Barrott - Looking Through The Mirror Of The Soul (Chihei Hatakeyama Extended Remix) 19. LXGIØN, brndoom - i miss you 20. diedlonely - memories of you 21. Snow In March - Nightfall 22. diedlonely, leadwave, ihatemyjob - cessation 23. Chilly Holliday - lost to dream 24. diedlonely, Etsu — you're not the same 25. Notan Nigres - One Last Time 26. a vow - foggy skies 27. Notan Nigres - Lost Soul 28. pxlse., ascxnd — this place feels familiar 29. 120days - together 30. Unnholy — left behind 31. for home use only, Houle - mystica

STAYradio Episode #293 aired Friday November 14th, 2025. This episode features new music by Fraze, Fashen, Curbi, Prospa, Joel Corry, Beachcrimes, Felix Cartel, Surf Mesa, 5HOURS and many more!

Эмбиент-проект Sirius X, приглашает вас погрузиться в завораживающее путешествие со своим новым синглом «Days Go By», в котором сочетаются завораживающие мелодии с богатыми атмосферными текстурами. Эта чарующая композиция соткана из таинственности и эмоций, затягивая вас в свои глубины и пробуждая глубокие чувства в вашей душе. Воздушные звуковые ландшафты плавно переплетаются с замысловатыми звуковыми деталями, создавая глубокое погружение. «Days Go By» воплощает исключительное мастерство Sirius X, приглашая слушателей отправиться в успокаивающее и в то же время интроспективное путешествие по звуковым ландшафтам, пробуждающим одновременно ностальгию и надежду. Слушая этот трек, вы перенесётесь в безмятежную гавань, место умиротворения и размышлений, что делает этот сингл настоящим шедевром для всех, кто ищет момент умиротворения и эмоциональной связи. National Sound Records ▶ band.link/daysgoby ______ #ambeint #music #ambient #electronic #ambient #chill #chillout #darkambient #relax #relaxation #relaxing #siriusx

Alice and Martha return to the thrilling page sequence in Sirius's bedroom. A shady reference to Muriel, a (Hermione voice) "Harry" and a possible hint of Bucky's presence? What more could we ask for??Please consider supporting us on Patreon! www.patreon.com/realweirdsisters New episodes are released every Monday and special topics shows are released periodically. Don't forget to subscribe to our show to make sure you never miss an episode!

Caning to be imposed on online scammers in Singapore :: Dave Ridley calls about Naomi Brockwell's liberty AI course :: Sketter calls about scalpers :: Turd Fergeson calls about Sydney Sweeny :: Sarah from NM calls about mayoral runoff :: #2 story: Delta flyer spends 5.5 hours next to a man who soiled himself :: call about man fainting at trump press conference :: Trump banning visas for fatties :: Carl's Jr. offers $1 meals in California during shutdown :: Trump halts emergency EBT payments :: Alu Axleman calls about a bill to limit time for "speedy trial" :: 2025-11-09 Hosts: Stu, Rich E Rich, Big Kahuna

Caning to be imposed on online scammers in Singapore :: Dave Ridley calls about Naomi Brockwell's liberty AI course :: Sketter calls about scalpers :: Turd Fergeson calls about Sydney Sweeny :: Sarah from NM calls about mayoral runoff :: #2 story: Delta flyer spends 5.5 hours next to a man who soiled himself :: call about man fainting at trump press conference :: Trump banning visas for fatties :: Carl's Jr. offers $1 meals in California during shutdown :: Trump halts emergency EBT payments :: Alu Axleman calls about a bill to limit time for "speedy trial" :: 2025-11-09 Hosts: Stu, Rich E Rich, Big Kahuna

Declaration of Independence Today - do the grievances against King George still apply to Washington? :: Ridley calls, still getting calls from press on past activism :: Skeeter thinks all libertarians should have left the US when they turned 18 :: Sarah in New Mexico helps her guy do well in the election but not convinced she should run for office. She says SNAP is too much paperwork :: DC sandwich guy not indicted :: Peanut allergies drop after a return to not telling parents to keep children away from peanuts :: what has the Free State Project actually accomplished in New Hampshire? Quite a bit it turns out :: 2025-11-08 Hosts: Chris, Riley, Penguin

He's the man behind the afternoon voice on Sirius XM's 70's at 7. JAYBEAU JONES' love and appreciation for music goes well beyond being a radio personality. His "Music Drives Us" podcast features some of the greatest voices in music history has featured amazing guests like Mickey Dolenz (of the Monkees), actor Keifer Sutherland, Russell Hitchcock (of Air Supply) and so many others who talk about how music has made their lives what they are today. Jaybeau also has stories from behind the microphone, including radio station promotions gone wrong and the great story of filling in for Rick Dees on the Rick Dees Weekly top 40 (That story is worth the whole show!) If you're a fan of radio personalities or Sirius 70's at 7, this is a must listen! Hosted by Simplecast, an AdsWizz company. See pcm.adswizz.com for information about our collection and use of personal data for advertising.

Declaration of Independence Today - do the grievances against King George still apply to Washington? :: Ridley calls, still getting calls from press on past activism :: Skeeter thinks all libertarians should have left the US when they turned 18 :: Sarah in New Mexico helps her guy do well in the election but not convinced she should run for office. She says SNAP is too much paperwork :: DC sandwich guy not indicted :: Peanut allergies drop after a return to not telling parents to keep children away from peanuts :: what has the Free State Project actually accomplished in New Hampshire? Quite a bit it turns out :: 2025-11-08 Hosts: Chris, Riley, Penguin

8. The Trans Earth Injection, Lovell's Navigation Error, and the Successful Reentry. Bob Zimmerman discusses how the Trans Earth Injection (TEI) was the mission's second moment of highest risk, requiring the non-redundant SPS engine to fire on the backside of the moon to propel them back to Earth. Susan Borman had been most anxious about this burn, knowing failure meant certain death in lunar orbit. When they reacquired signal, Jim Lovell famously declared, "I want to report that there is a Santa Claus," signaling success. On the return journey, Lovell, the navigator, accidentally cleared the navigation data in the computer (the gimbal), causing the spacecraft to lose orientation. Lovell was forced to correct the craft's position by manually using a sextant and taking readings from stars like Rigel and Sirius, proving the value of the backup system. Finally, they successfully executed the complex "double skip trajectory" reentry at 25,000 mph, landing within three miles of the recovery ships, though the capsule temporarily flipped upside down. 1618

STAYradio Episode #292 aired Friday November 7th, 2025. This episode features new music by Katch, Biscuts, DVRKO, COASTR, Martin Garrix, Lost Kings, Jordan Peak and many more!

No more food stamps for you :: Phone given to the masses as a distraction and division tactic :: Gremlins in the machines :: Bonnie decides not to use a Ouija board :: Voluntary society as compared to forced "social contract" :: Incentives left wing politics invite homelessness into towns with :: If the US constitution WAS a contract it's null and void now that the gov has broken their end :: Taxation just social control :: Gold rush to cash in :: Gold in Fort Knox? :: Immigrants who would never get here to begin with without getting shipped here by the gov :: You shouldn't be paying taxes :: Dr. Reality podcast :: Helicopter parents :: 2025-11-01 Hosts: Bonnie, Colin, Angelo

Riley O'Bill is in a horrible mood :: Pine Tree Riot flag banned, called "racist" :: Of Course You Do, You're 12 Theory :: Does Trump want to conquer Venezuela? :: Welfare has become a lifestyle :: Speeding camera task force defeating the purpose of speeding cameras :: What is "deja vu" to you? :: Do you have a right to food? :: Becoming libertarian for practical purposes :: Zohran Mamdani and the fear of what his policies may do :: In US we have cronyism, not capitalism :: Slovakia implements a speed limit for pedestrians :: Chocolate bars cutting down on the amount of chocolate in the bars :: 2025-11-02 Hosts: Bonnie, Riley, Rich E Rich

No more food stamps for you :: Phone given to the masses as a distraction and division tactic :: Gremlins in the machines :: Bonnie decides not to use a Ouija board :: Voluntary society as compared to forced "social contract" :: Incentives left wing politics invite homelessness into towns with :: If the US constitution WAS a contract it's null and void now that the gov has broken their end :: Taxation just social control :: Gold rush to cash in :: Gold in Fort Knox? :: Immigrants who would never get here to begin with without getting shipped here by the gov :: You shouldn't be paying taxes :: Dr. Reality podcast :: Helicopter parents :: 2025-11-01 Hosts: Bonnie, Colin, Angelo

This week's episode is late & unhinged, per usz. While researching the 22nd amendment, Julie & Brandy stumbled upon the unfortunate reality of (the lack of) women's rights protected under the United States Constitution. This revelation led to a spiral of hopeless histrionics, which can only be described as very f*cking annoying. ****CHECK OUT FREE EPISODES OF JULIE & BRANDY'S PATREON PODCAST****FOLLOW JULIE ON INSTAGRAM & TWITTER****FOLLOW BRANDY ON INSTAGRAM & TWITTER***CHECK OUT THEIR T-SHIRTS!***EMAIL THEM! JulieBrandyPodcast@gmail.com******* Dumb Gay Politics with Julie & Brandy **** Dumb Gay Podcast with Julie & Brandy **** Julie Goldman **** Brandy Howard **** Julie and Brandy *** The People's Couch *** DGP *** Gay Podcast *** Political Podcast *** Lesbian *** Bravo *** Housewives *** Queer *** Liberal **** LGBTQ **** Killer Burlesque *** Host *** Portland *** Denver *** Nightmare on Strip Street *** Funny *** Comedy *** Democrat *** Progressive *** Comedian *** Jewish *** Politics *** Left *** San Francisco *** Politics *** Rights *** See Privacy Policy at https://art19.com/privacy and California Privacy Notice at https://art19.com/privacy#do-not-sell-my-info.