POPULARITY
Continuo con la segunda y probablemente ultima parte de mis comentarios acerca del los documentales The Beatles Get Back, dirigido por Peter Jackson, y McCartney 3 2 1, ambos en Disney+ En este capítulo, además, te propongo un reto ENLACES RELACIONADOS Enlace con el artículo sobre este podcast en el blog Unicorn-ST Podcrastinando YTD 238 - The Beatles get Back - Parte 1 Conflictos entre Apple Computer y Apple Corps Lista de reproducción en Spotify de mis selección de temas conocidos de los Beatles The Beatles: Get Back" en Disney+ McCartney 3,2,1" en Disney+ The Beatles: Get Back | Official Trailer | Disney+ McCartney 3 2 1 | Tráiler Oficial | Disney+ INFORMACIÓN Y DATOS DE CONTACTO Twitter: @SansaTwit e-mail: info@unicorn-st.es www.podcrastinando.es www.unicorn-st.com www.genide.com www.wintablet.info Grupo Telegram Unicorn ST http://bit.ly/GrupoTelegramUnicornST Suscríbete a Podcrastinando, el feed que contiene todos mis podcast (Unicorn ST & Ya Te Digo) https://feedpress.me/sospechososPodcrastinando Podcast asociado a la red de SOSPECHOSOS HABITUALES. Suscríbete con este feed: https://feedpress.me/sospechososhabituales Podcast grabado y editado con la aplicación Audacity, micro Behringer XM8500, mesa Behringer Xenyx 302 USB. Algunas partes grabadas directamente con un Samsun Galaxy Z Fold 3 --- Send in a voice message: https://anchor.fm/podcrastinando/message
Continuo con la segunda y probablemente ultima parte de mis comentarios acerca del los documentales The Beatles Get Back, dirigido por Peter Jackson, y McCartney 3 2 1, ambos en Disney+ En este capítulo, además, te propongo un reto ENLACES RELACIONADOS Enlace con el artículo sobre este podcast en el blog Unicorn-ST Podcrastinando YTD 238 - The Beatles get Back - Parte 1 Conflictos entre Apple Computer y Apple Corps Lista de reproducción en Spotify de mis selección de temas conocidos de los Beatles The Beatles: Get Back" en Disney+ McCartney 3,2,1" en Disney+ The Beatles: Get Back | Official Trailer | Disney+ McCartney 3 2 1 | Tráiler Oficial | Disney+ INFORMACIÓN Y DATOS DE CONTACTO Twitter: @SansaTwit e-mail: info@unicorn-st.es www.podcrastinando.es www.unicorn-st.com www.genide.com www.wintablet.info Grupo Telegram Unicorn ST http://bit.ly/GrupoTelegramUnicornST Suscríbete a Podcrastinando, el feed que contiene todos mis podcast (Unicorn ST & Ya Te Digo) https://feedpress.me/sospechososPodcrastinando Podcast asociado a la red de SOSPECHOSOS HABITUALES. Suscríbete con este feed: https://feedpress.me/sospechososhabituales Podcast grabado y editado con la aplicación Audacity, micro Behringer XM8500, mesa Behringer Xenyx 302 USB. Algunas partes grabadas directamente con un Samsun Galaxy Z Fold 3 --- Send in a voice message: https://anchor.fm/podcrastinando/message
Continuo con la segunda y probablemente ultima parte de mis comentarios acerca del los documentales The Beatles Get Back, dirigido por Peter Jackson, y McCartney 3 2 1, ambos en Disney+ En este capítulo, además, te propongo un reto ENLACES RELACIONADOS Enlace con el artículo sobre este podcast en el blog Unicorn-ST Podcrastinando YTD 238 - The Beatles get Back - Parte 1 Conflictos entre Apple Computer y Apple Corps Lista de reproducción en Spotify de mis selección de temas conocidos de los Beatles The Beatles: Get Back" en Disney+ McCartney 3,2,1" en Disney+ The Beatles: Get Back | Official Trailer | Disney+ McCartney 3 2 1 | Tráiler Oficial | Disney+ INFORMACIÓN Y DATOS DE CONTACTO Twitter: @SansaTwit e-mail: info@unicorn-st.es www.podcrastinando.es www.unicorn-st.com www.genide.com www.wintablet.info Grupo Telegram Unicorn ST http://bit.ly/GrupoTelegramUnicornST Suscríbete a Podcrastinando, el feed que contiene todos mis podcast (Unicorn ST & Ya Te Digo) https://feedpress.me/sospechososPodcrastinando Podcast asociado a la red de SOSPECHOSOS HABITUALES. Suscríbete con este feed: https://feedpress.me/sospechososhabituales Podcast grabado y editado con la aplicación Audacity, micro Behringer XM8500, mesa Behringer Xenyx 302 USB. Algunas partes grabadas directamente con un Samsun Galaxy Z Fold 3 --- Send in a voice message: https://anchor.fm/podcrastinando/message
Continuo con la segunda y probablemente ultima parte de mis comentarios acerca del los documentales The Beatles Get Back, dirigido por Peter Jackson, y McCartney 3 2 1, ambos en Disney+ En este capítulo, además, te propongo un reto ENLACES RELACIONADOS Enlace con el artículo sobre este podcast en el blog Unicorn-ST Podcrastinando YTD 238 - The Beatles get Back - Parte 1 Conflictos entre Apple Computer y Apple Corps Lista de reproducción en Spotify de mis selección de temas conocidos de los Beatles The Beatles: Get Back" en Disney+ McCartney 3,2,1" en Disney+ The Beatles: Get Back | Official Trailer | Disney+ McCartney 3 2 1 | Tráiler Oficial | Disney+ INFORMACIÓN Y DATOS DE CONTACTO Twitter: @SansaTwit e-mail: info@unicorn-st.es www.podcrastinando.es www.unicorn-st.com www.genide.com www.wintablet.info Grupo Telegram Unicorn ST http://bit.ly/GrupoTelegramUnicornST Suscríbete a Podcrastinando, el feed que contiene todos mis podcast (Unicorn ST & Ya Te Digo) https://feedpress.me/sospechososPodcrastinando Podcast asociado a la red de SOSPECHOSOS HABITUALES. Suscríbete con este feed: https://feedpress.me/sospechososhabituales Podcast grabado y editado con la aplicación Audacity, micro Behringer XM8500, mesa Behringer Xenyx 302 USB. Algunas partes grabadas directamente con un Samsun Galaxy Z Fold 3 --- Send in a voice message: https://anchor.fm/podcrastinando/message
Si te ha gustado mi review y quieres hacerte con una Xenyx 302 USB puedes hacer a través de im enlace de afiliados de Amazon https://amzn.to/3LHIlIxRecuerda que puedes apoyar a este podcast a través de mi perfil en Ko-Fi invitándome a un café entrando en: https://jorgemarinnieto.com/cafe o si lo prefieres comprando la taza oficial del podcast en https://jorgemarinnieto.com/taza. Si no quieres que te cueste nada, puedes hacerlo realizando tus compras en Amazon a través de mi enlace de afiliados: https://jorgemarinnieto.com/amazonRevisa la pestaña de Commissions si quieres que tu proyecto se convierta en el patrocinador de este podcast. Puedes escoger entre un episodio dedicado, un patrocinio semanal, quincenal o mensual.Por otro lado, si apoyas este podcast a través de Aureal harás que mi trabajo se vea recompensando. Puedes escucharlo allí entrando en https://aureal.one/podcast/10722 e incluso subir tu propio podcast a través del siguiente enlace https://aureal.one/referral?refCode=a9b3af206183Si no quieres perderte ninguna de las recomendaciones, noticias, herramientas, eventos o curiosidades relacionadas con el podcasting te recomiendo unirte al canal de Telegram del podcast a través de: https://t.me/alotroladodelmicrofono o bien, siguiendo mi cuenta de Twitter: @EoveLa sintonía que me acompaña en cada episodio pertenece a Jason Shaw y su título es 2 Above Zero
This track used a Behringer Pro-1 synth (kindly on-loan from a friend), and played using the arpeigiator on my Arturia Keystep. It was mixed via a Behringer Xenyx 502 and Behringer UCA202 into Audacity (with some additions of numerous effects and stuff).
Si estás buscando una interface USB que sea portátil, que tenga buena buena ganancia para tus micrófonos y que puedas grabar con excelente calidad entonces debes conocer la Audient Evo 4. Hoy te la reseño, escucha. ¿Estás interesado en crear un podcast o acabas de crearlo? Entonces estás en el lugar indicado, porque en este programa tendrás claves, técnicas, herramientas, aplicaciones, y respuestas para que lleves tu podcast al siguiente nivel. Y contigo tu anfitrión: Podcaster y solopreneur que ha hecho del podcast su mejor medio para vivir. El del apellido japonés pero dominicano hasta la tambora: Robert Sasuke. Abre bien tus oídos porque ¡Esto es Podcast! Si estás comenzando tu podcast o si ya diste el paso con tus primeros episodios, ve por más aprendiendo cómo hacerlo en menos tiempo, con menos recursos pero elevando la calidad de tu producción. Tienes el curso completo con todo lo que necesitas para aprender a crear, crecer y monetizar tu podcast en www.creaunpodcast.com Enlaces mencionados en este episodio: 35% OFF en Curso online: Crea y lanza tu negocio online - https://lanzup.me 35% OFF en Academia: Kaiisen.com - https://kaiisen.com 35% OFF en Curso online: Crea un podcast nivel PRO - https://creaunpodcast.com Nueva Red Social - COMUNIDAD SASUKE: https://robertsasuke.com/social Episodios relacionados:9 tips de locución para aplica con tu podcastEl Micrófono que llegó para hacer historia: PreSonus PD-70Envía notificaciones a la pc o móvil de tu audiencia: OneSignalGraba como los profesionales: Espumas y filtros POPLa App más potente para grabar tu podcast sin editar: Backpack StudioMesa de mezcla pequeña pero potente: Behringer Xenyx 302 USBMicrófono Análogo y Digital super potente: Samson Q9URecibe Apoyo Económico de tu Audiencia sin Limitaciones: Ko-fi Gracias por Escucharnos! Comparte lo que piensas: Deja un comentario al final de esta sección, en el cuadro de comentarios. Puedes proponer un tema o votar por otros que sean propuesto, hazlo aquí Para ayudar a crecer este programa: Deja una reseña y una valoración en iTunes (Apple Podcast). Tus valoraciones realmente nos ayudan mucho a alcanzar a otras personas.
En mis inicios utilicé esta mesa de mezcla y la recomiendo siempre, es compacto, potente y versatil... ah y está a buen precio porque hace buen tiempo que salió al mercado. Te hablo de la Xenyx 302 USB. ¿Estás interesado en crear un podcast o acabas de crearlo? Entonces estás en el lugar indicado, porque en este programa tendrás claves, técnicas, herramientas, aplicaciones, y respuestas para que lleves tu podcast al siguiente nivel. Y contigo tu anfitrión: Podcaster y solopreneur que ha hecho del podcast su mejor medio para vivir. El del apellido japonés pero dominicano hasta la tambora: Robert Sasuke. Abre bien tus oídos porque ¡Esto es Podcast! Si estás comenzando tu podcast o si ya diste el paso con tus primeros episodios, ve por más aprendiendo cómo hacerlo en menos tiempo, con menos recursos pero elevando la calidad de tu producción. Tienes el curso completo con todo lo que necesitas para aprender a crear, crecer y monetizar tu podcast en www.https://www.kaiisen.com/curso/hacer-un-podcast-exitoso/ Enlaces mencionados en este episodio: 35% OFF en Curso online: Crea y lanza tu negocio online - https://www.kaiisen.com/curso/lean-startup-negocios/ 35% OFF en Academia: Kaiisen.com - https://www.kaiisen.com 35% OFF en Curso online: Crea un podcast nivel PRO - https://www.kaiisen.com/curso/podgratis/ Nueva Red Social - COMUNIDAD SASUKE: https://t.me/teinvitouncafe [custom-related-posts title="Episodios relacionados:" none_text="None found" order_by="title" order="ASC"] Gracias por Escucharnos! Comparte lo que piensas: Deja un comentario al final de esta sección, en el cuadro de comentarios. Puedes proponer un tema o votar por otros que sean propuesto, hazlo aquí Para ayudar a crecer este programa: Deja una reseña y una valoración en iTunes (Apple Podcast). Tus valoraciones realmente nos ayudan mucho a alcanzar a otras personas.
En mis inicios utilicé esta mesa de mezcla y la recomiendo siempre, es compacto, potente y versatil... ah y está a buen precio porque hace buen tiempo que salió al mercado. Te hablo de la Xenyx 302 USB. ¿Estás interesado en crear un podcast o acabas de crearlo? Entonces estás en el lugar indicado, porque en este programa tendrás claves, técnicas, herramientas, aplicaciones, y respuestas para que lleves tu podcast al siguiente nivel. Y contigo tu anfitrión: Podcaster y solopreneur que ha hecho del podcast su mejor medio para vivir. El del apellido japonés pero dominicano hasta la tambora: Robert Sasuke. Abre bien tus oídos porque ¡Esto es Podcast! Si estás comenzando tu podcast o si ya diste el paso con tus primeros episodios, ve por más aprendiendo cómo hacerlo en menos tiempo, con menos recursos pero elevando la calidad de tu producción. Tienes el curso completo con todo lo que necesitas para aprender a crear, crecer y monetizar tu podcast en www.creaunpodcast.com Enlaces mencionados en este episodio: 35% OFF en Curso online: Crea y lanza tu negocio online - https://lanzup.me 35% OFF en Academia: Kaiisen.com - https://kaiisen.com 35% OFF en Curso online: Crea un podcast nivel PRO - https://creaunpodcast.com Nueva Red Social - COMUNIDAD SASUKE: https://robertsasuke.com/social Episodios relacionados:14 errores técnicos que cometes con tu podcast y no lo sabes4 Equipos BBB para crear un estudio de podcasting9 tips de locución para aplica con tu podcastEnvía notificaciones a la pc o móvil de tu audiencia: OneSignalGraba como los profesionales: Espumas y filtros POPInterface USB Sencilla pero Poderosa: La Audient Evo 4Pod.Fan: Crea un podcast con membresía Gracias por Escucharnos! Comparte lo que piensas: Deja un comentario al final de esta sección, en el cuadro de comentarios. Puedes proponer un tema o votar por otros que sean propuesto, hazlo aquí Para ayudar a crecer este programa: Deja una reseña y una valoración en iTunes (Apple Podcast). Tus valoraciones realmente nos ayudan mucho a alcanzar a otras personas.
Si bien es cierto que el locutor de oficio se dedica a hablar en los medios de comunicación tradicionales, hay técnicas y recomendaciones que pueden aplicarse al podcast. Hoy te regalo 9 de ellos para que los pongas en práctica. ¿Estás interesado en crear un podcast o acabas de crearlo? Entonces estás en el lugar indicado, porque en este programa tendrás claves, técnicas, herramientas, aplicaciones, y respuestas para que lleves tu podcast al siguiente nivel. Y contigo tu anfitrión: Podcaster y solopreneur que ha hecho del podcast su mejor medio para vivir. El del apellido japonés pero dominicano hasta la tambora: Robert Sasuke. Abre bien tus oídos porque ¡Esto es Podcast! Si estás comenzando tu podcast o si ya diste el paso con tus primeros episodios, ve por más aprendiendo cómo hacerlo en menos tiempo, con menos recursos pero elevando la calidad de tu producción. Tienes el curso completo con todo lo que necesitas para aprender a crear, crecer y monetizar tu podcast en www.creaunpodcast.com Enlaces mencionados en este episodio: 35% OFF en Curso online: Crea y lanza tu negocio online - https://lanzup.me 35% OFF en Academia: Kaiisen.com - https://kaiisen.com 35% OFF en Curso online: Crea un podcast nivel PRO - https://creaunpodcast.com Nueva Red Social - COMUNIDAD SASUKE: https://robertsasuke.com/social Episodios relacionados:11 trucos para eliminar las muletillas cuando grabas14 errores técnicos que cometes con tu podcast y no lo sabes4 Equipos BBB para crear un estudio de podcasting7 tips para captar la atención hacia tu podcastInterface USB Sencilla pero Poderosa: La Audient Evo 4Las 3 Maneras para Crear un Plan de Contenidos para mi PodcastMesa de mezcla pequeña pero potente: Behringer Xenyx 302 USBSi ya tienes la atención, ahora te falta la retención: 5 tips para lograrlo¿Cuál debe ser la duración óptima para mis episodios? Te regalo una fórmula¿Cómo promover mi podcast sin que se vea como Spam?¿Cómo puedo lograr miles de descargas al iniciar mi podcast?¿Se puede hacer dinero comenzando un podcast? Si, pero... Gracias por Escucharnos! Comparte lo que piensas: Deja un comentario al final de esta sección, en el cuadro de comentarios. Puedes proponer un tema o votar por otros que sean propuesto, hazlo aquí Para ayudar a crecer este programa: Deja una reseña y una valoración en iTunes (Apple Podcast). Tus valoraciones realmente nos ayudan mucho a alcanzar a otras personas.
Estos artículos son básicos y parecerían ser tan insignificantes para grabar, pero la realidad es que hacen una diferencia tremenda a la hora de entregar un audio con buena calidad de grabación. Conoce la importancia del uso de los filtros antipop. ¿Estás interesado en crear un podcast o acabas de crearlo? Entonces estás en el lugar indicado, porque en este programa tendrás claves, técnicas, herramientas, aplicaciones, y respuestas para que lleves tu podcast al siguiente nivel. Y contigo tu anfitrión: Podcaster y solopreneur que ha hecho del podcast su mejor medio para vivir. El del apellido japonés pero dominicano hasta la tambora: Robert Sasuke. Abre bien tus oídos porque ¡Esto es Podcast! Si estás comenzando tu podcast o si ya diste el paso con tus primeros episodios, ve por más aprendiendo cómo hacerlo en menos tiempo, con menos recursos pero elevando la calidad de tu producción. Tienes el curso completo con todo lo que necesitas para aprender a crear, crecer y monetizar tu podcast en www.creaunpodcast.com Enlaces mencionados en este episodio: 35% OFF en Curso online: Crea y lanza tu negocio online - https://lanzup.me 35% OFF en Academia: Kaiisen.com - https://kaiisen.com 35% OFF en Curso online: Crea un podcast nivel PRO - https://creaunpodcast.com Nueva Red Social - COMUNIDAD SASUKE: https://robertsasuke.com/social Episodios relacionados:11 trucos para eliminar las muletillas cuando grabas4 Equipos BBB para crear un estudio de podcastingEl Micrófono que llegó para hacer historia: PreSonus PD-70Envía notificaciones a la pc o móvil de tu audiencia: OneSignalEstudio de podcasting todo en uno: Zoom Podtrak P4Interface USB Sencilla pero Poderosa: La Audient Evo 4Mesa de mezcla pequeña pero potente: Behringer Xenyx 302 USBPod.Fan: Crea un podcast con membresía Gracias por Escucharnos! Comparte lo que piensas: Deja un comentario al final de esta sección, en el cuadro de comentarios. Puedes proponer un tema o votar por otros que sean propuesto, hazlo aquí Para ayudar a crecer este programa: Deja una reseña y una valoración en iTunes (Apple Podcast). Tus valoraciones realmente nos ayudan mucho a alcanzar a otras personas.
En el día de hoy quiero presentarte una web app que te facilita el enviar notificaciones push a las pantalla de los móviles y los escritorios de los computadores de tus escuchas, se llama One Signal y te muestro sus características. ¿Estás interesado en crear un podcast o acabas de crearlo? Entonces estás en el lugar indicado, porque en este programa tendrás claves, técnicas, herramientas, aplicaciones, y respuestas para que lleves tu podcast al siguiente nivel. Y contigo tu anfitrión: Podcaster y solopreneur que ha hecho del podcast su mejor medio para vivir. El del apellido japonés pero dominicano hasta la tambora: Robert Sasuke. Abre bien tus oídos porque ¡Esto es Podcast! Si estás comenzando tu podcast o si ya diste el paso con tus primeros episodios, ve por más aprendiendo cómo hacerlo en menos tiempo, con menos recursos pero elevando la calidad de tu producción. Tienes el curso completo con todo lo que necesitas para aprender a crear, crecer y monetizar tu podcast en www.creaunpodcast.com Enlaces mencionados en este episodio: 35% OFF en Curso online: Crea y lanza tu negocio online - https://lanzup.me 35% OFF en Academia: Kaiisen.com - https://kaiisen.com 35% OFF en Curso online: Crea un podcast nivel PRO - https://creaunpodcast.com Nueva Red Social - COMUNIDAD SASUKE: https://robertsasuke.com/social Episodios relacionados:11 trucos para eliminar las muletillas cuando grabas14 errores técnicos que cometes con tu podcast y no lo sabes3 maneras de preparar el guión de tu podcast4 Equipos BBB para crear un estudio de podcastingGraba como los profesionales: Espumas y filtros POPInterface USB Sencilla pero Poderosa: La Audient Evo 4Mesa de mezcla pequeña pero potente: Behringer Xenyx 302 USBPodfade: 7 tips para no abandonar tu podcastTú móvil: el computador más práctico para grabar tu podcast Gracias por Escucharnos! Comparte lo que piensas: Deja un comentario al final de esta sección, en el cuadro de comentarios. Puedes proponer un tema o votar por otros que sean propuesto, hazlo aquí Para ayudar a crecer este programa: Deja una reseña y una valoración en iTunes (Apple Podcast). Tus valoraciones realmente nos ayudan mucho a alcanzar a otras personas.
Si estás interesado en crear tu estudio de podcasting hoy te presento 4 elementos que deben ser indispensables para crearlo y sobre todo hablarte de equipos que son BBB para montarlo más rápido. Escucha. ¿Estás interesado en crear un podcast o acabas de crearlo? Entonces estás en el lugar indicado, porque en este programa tendrás claves, técnicas, herramientas, aplicaciones, y respuestas para que lleves tu podcast al siguiente nivel. Y contigo tu anfitrión: Podcaster y solopreneur que ha hecho del podcast su mejor medio para vivir. El del apellido japonés pero dominicano hasta la tambora: Robert Sasuke. Abre bien tus oídos porque ¡Esto es Podcast! Si estás comenzando tu podcast o si ya diste el paso con tus primeros episodios, ve por más aprendiendo cómo hacerlo en menos tiempo, con menos recursos pero elevando la calidad de tu producción. Tienes el curso completo con todo lo que necesitas para aprender a crear, crecer y monetizar tu podcast en www.creaunpodcast.com Enlaces mencionados en este episodio: 35% OFF en Curso online: Crea y lanza tu negocio online - https://lanzup.me 35% OFF en Academia: Kaiisen.com - https://kaiisen.com 35% OFF en Curso online: Crea un podcast nivel PRO - https://creaunpodcast.com Nueva Red Social - COMUNIDAD SASUKE: https://robertsasuke.com/social Episodios relacionados:11 trucos para eliminar las muletillas cuando grabas14 errores técnicos que cometes con tu podcast y no lo sabes3 maneras de preparar el guión de tu podcast7 Elementos que debe tener un Dossier de tu Podcast9 tips de locución para aplica con tu podcastEl Micrófono que llegó para hacer historia: PreSonus PD-70Envía notificaciones a la pc o móvil de tu audiencia: OneSignalEstudio de podcasting todo en uno: Zoom Podtrak P4Graba a distancia, edita y publica tu podcast sin instalar programas: SoundtrapGraba como los profesionales: Espumas y filtros POPMesa de mezcla pequeña pero potente: Behringer Xenyx 302 USBPod.Fan: Crea un podcast con membresíaPodfade: 7 tips para no abandonar tu podcastTú móvil: el computador más práctico para grabar tu podcast¿Cómo promover mi podcast sin que se vea como Spam?¿Se puede hacer dinero comenzando un podcast? Si, pero... Gracias por Escucharnos! Comparte lo que piensas: Deja un comentario al final de esta sección, en el cuadro de comentarios. Puedes proponer un tema o votar por otros que sean propuesto, hazlo aquí Para ayudar a crecer este programa: Deja una reseña y una valoración en iTunes (Apple Podcast). Tus valoraciones realmente nos ayudan mucho a alcanzar a otras personas.
He decidido hacer una lista de detalles que quizás estás dejando pasar por alto pero yo considero que son errores que debes comenzar a corregir y me atrevo por los años y errores que yo mismo he cometido. Espero te sirvan ¿Estás interesado en crear un podcast o acabas de crearlo? Entonces estás en el lugar indicado, porque en este programa tendrás claves, técnicas, herramientas, aplicaciones, y respuestas para que lleves tu podcast al siguiente nivel. Y contigo tu anfitrión: Podcaster y solopreneur que ha hecho del podcast su mejor medio para vivir. El del apellido japonés pero dominicano hasta la tambora: Robert Sasuke. Abre bien tus oídos porque ¡Esto es Podcast! Si estás comenzando tu podcast o si ya diste el paso con tus primeros episodios, ve por más aprendiendo cómo hacerlo en menos tiempo, con menos recursos pero elevando la calidad de tu producción. Tienes el curso completo con todo lo que necesitas para aprender a crear, crecer y monetizar tu podcast en www.creaunpodcast.com Enlaces mencionados en este episodio: 35% OFF en Curso online: Crea y lanza tu negocio online - https://lanzup.me 35% OFF en Academia: Kaiisen.com - https://kaiisen.com 35% OFF en Curso online: Crea un podcast nivel PRO - https://creaunpodcast.com Nueva Red Social - COMUNIDAD SASUKE: https://robertsasuke.com/social Episodios relacionados:11 trucos para eliminar las muletillas cuando grabas3 maneras de preparar el guión de tu podcast4 Equipos BBB para crear un estudio de podcasting9 tips de locución para aplica con tu podcastAmplificador para 2 auriculares: M-audio Bass TravelerEnvía notificaciones a la pc o móvil de tu audiencia: OneSignalEstudio de podcasting todo en uno: Zoom Podtrak P4Graba a distancia, edita y publica tu podcast sin instalar programas: SoundtrapMesa de mezcla pequeña pero potente: Behringer Xenyx 302 USBPod.Fan: Crea un podcast con membresíaPodfade: 7 tips para no abandonar tu podcastTú móvil: el computador más práctico para grabar tu podcast¿Cómo promover mi podcast sin que se vea como Spam?¿Cómo puedo lograr miles de descargas al iniciar mi podcast?¿Se puede hacer dinero comenzando un podcast? Si, pero... Gracias por Escucharnos! Comparte lo que piensas: Deja un comentario al final de esta sección, en el cuadro de comentarios. Puedes proponer un tema o votar por otros que sean propuesto, hazlo aquí Para ayudar a crecer este programa: Deja una reseña y una valoración en iTunes (Apple Podcast). Tus valoraciones realmente nos ayudan mucho a alcanzar a otras personas.
Si estás interesado en monetizar tu podcast creando episodios exclusivos y así obtener ingresos recurrentes, entonces puedes considerar utilizar pod.fan una plataforma que integra características de micro mecenazgo pero solo para podcasters. Aquí te lo presento. ¿Estás interesado en crear un podcast o acabas de crearlo? Entonces estás en el lugar indicado, porque en este programa tendrás claves, técnicas, herramientas, aplicaciones, y respuestas para que lleves tu podcast al siguiente nivel. Y contigo tu anfitrión: Podcaster y solopreneur que ha hecho del podcast su mejor medio para vivir. El del apellido japonés pero dominicano hasta la tambora: Robert Sasuke. Abre bien tus oídos porque ¡Esto es Podcast! Si estás comenzando tu podcast o si ya diste el paso con tus primeros episodios, ve por más aprendiendo cómo hacerlo en menos tiempo, con menos recursos pero elevando la calidad de tu producción. Tienes el curso completo con todo lo que necesitas para aprender a crear, crecer y monetizar tu podcast en www.creaunpodcast.com Enlaces mencionados en este episodio: 35% OFF en Curso online: Crea y lanza tu negocio online - https://lanzup.me 35% OFF en Academia: Kaiisen.com - https://kaiisen.com 35% OFF en Curso online: Crea un podcast nivel PRO - https://creaunpodcast.com Nueva Red Social - COMUNIDAD SASUKE: https://robertsasuke.com/social Episodios relacionados:14 errores técnicos que cometes con tu podcast y no lo sabes4 Equipos BBB para crear un estudio de podcastingAmplificador para 2 auriculares: M-audio Bass TravelerEstudio de podcasting todo en uno: Zoom Podtrak P4Graba a distancia, edita y publica tu podcast sin instalar programas: SoundtrapGraba como los profesionales: Espumas y filtros POPMesa de mezcla pequeña pero potente: Behringer Xenyx 302 USBPodfade: 7 tips para no abandonar tu podcastTú móvil: el computador más práctico para grabar tu podcast Gracias por Escucharnos! Comparte lo que piensas: Deja un comentario al final de esta sección, en el cuadro de comentarios. Puedes proponer un tema o votar por otros que sean propuesto, hazlo aquí Para ayudar a crecer este programa: Deja una reseña y una valoración en iTunes (Apple Podcast). Tus valoraciones realmente nos ayudan mucho a alcanzar a otras personas.
O wyglądzie, możliwościach, oraz przykładowych zastosowaniach tego prostego miksera audio opowiada Kamil Kaczyński.
Algunos comentarios del episodio anterior... ENLACES DE INTERÉS Capítulo 190 Wild Horses de los Rolling Stones en Spotify Mesa de mezclas Behringer Xenyx 502 UCA200 Soundblaster Audigy 2NX Micro Behringer XM8500 INFORMACIÓN Y DATOS DE CONTACTO· Twitter: @SansaTwit e-mail: info@unicorn-st.es www.podcrastinando.es www.unicorn-st.com www.wintablet.info www.genide.es Grupo Telegram Unicorn ST http://bit.ly/GrupoTelegramUnicornST Suscríbete a Podcrastinando, el feed que contiene todos mis podcast www.podcrastinando.es http://feeds.feedburner.com/Podcrastinando Podcast asociado a la red de SOSPECHOSOS HABITUALES. Suscríbete con este feed: https://feedpress.me/sospechososhabituales Podcast grabado en Audacity con micro Boya LM1 en la aplicación de Anchor --- Send in a voice message: https://anchor.fm/podcrastinando/message
Algunos comentarios del episodio anterior... ENLACES DE INTERÉS Capítulo 190 Wild Horses de los Rolling Stones en Spotify Mesa de mezclas Behringer Xenyx 502 UCA200 Soundblaster Audigy 2NX Micro Behringer XM8500 INFORMACIÓN Y DATOS DE CONTACTO· Twitter: @SansaTwit e-mail: info@unicorn-st.es www.podcrastinando.es www.unicorn-st.com www.wintablet.info www.genide.es Grupo Telegram Unicorn ST http://bit.ly/GrupoTelegramUnicornST Suscríbete a Podcrastinando, el feed que contiene todos mis podcast www.podcrastinando.es http://feeds.feedburner.com/Podcrastinando Podcast asociado a la red de SOSPECHOSOS HABITUALES. Suscríbete con este feed: https://feedpress.me/sospechososhabituales Podcast grabado en Audacity con micro Boya LM1 en la aplicación de Anchor --- Send in a voice message: https://anchor.fm/podcrastinando/message
Algunos comentarios del episodio anterior... ENLACES DE INTERÉS Capítulo 190 Wild Horses de los Rolling Stones en Spotify Mesa de mezclas Behringer Xenyx 502 UCA200 Soundblaster Audigy 2NX Micro Behringer XM8500 INFORMACIÓN Y DATOS DE CONTACTO· Twitter: @SansaTwit e-mail: info@unicorn-st.es www.podcrastinando.es www.unicorn-st.com www.wintablet.info www.genide.es Grupo Telegram Unicorn ST http://bit.ly/GrupoTelegramUnicornST Suscríbete a Podcrastinando, el feed que contiene todos mis podcast www.podcrastinando.es http://feeds.feedburner.com/Podcrastinando Podcast asociado a la red de SOSPECHOSOS HABITUALES. Suscríbete con este feed: https://feedpress.me/sospechososhabituales Podcast grabado en Audacity con micro Boya LM1 en la aplicación de Anchor --- Send in a voice message: https://anchor.fm/podcrastinando/message
Algunos comentarios del episodio anterior... ENLACES DE INTERÉS Capítulo 190 Wild Horses de los Rolling Stones en Spotify Mesa de mezclas Behringer Xenyx 502 UCA200 Soundblaster Audigy 2NX Micro Behringer XM8500 INFORMACIÓN Y DATOS DE CONTACTO· Twitter: @SansaTwit e-mail: info@unicorn-st.es www.podcrastinando.es www.unicorn-st.com www.wintablet.info www.genide.es Grupo Telegram Unicorn ST http://bit.ly/GrupoTelegramUnicornST Suscríbete a Podcrastinando, el feed que contiene todos mis podcast www.podcrastinando.es http://feeds.feedburner.com/Podcrastinando Podcast asociado a la red de SOSPECHOSOS HABITUALES. Suscríbete con este feed: https://feedpress.me/sospechososhabituales Podcast grabado en Audacity con micro Boya LM1 en la aplicación de Anchor --- Send in a voice message: https://anchor.fm/podcrastinando/message
Ya que estaba haciendo pruebas con mi recientemente adquirida mesa de mezclas Behringer Xenyx 502, he grabado este capítulo en el que te lo cuento. ENLACES DE INTERÉS Wild Horses de los Rolling Stones en Spotify Mesa de mezclas Behringer Xenyx 502 UCA200 Soundblaster Audigy 2NX Micro Behringer XM8500 INFORMACIÓN Y DATOS DE CONTACTO· Twitter: @SansaTwit e-mail: info@unicorn-st.es www.podcrastinando.es www.unicorn-st.com www.wintablet.info www.genide.es Grupo Telegram Unicorn ST http://bit.ly/GrupoTelegramUnicornST Suscríbete a Podcrastinando, el feed que contiene todos mis podcast www.podcrastinando.es http://feeds.feedburner.com/Podcrastinando Podcast asociado a la red de SOSPECHOSOS HABITUALES. Suscríbete con este feed: https://feedpress.me/sospechososhabituales Podcast grabado en Audacity con micro Behringer XM8500 y mesa de mezclas Behringer Xenyx 502 en un Dell XPS 13 --- Send in a voice message: https://anchor.fm/podcrastinando/message
Ya que estaba haciendo pruebas con mi recientemente adquirida mesa de mezclas Behringer Xenyx 502, he grabado este capítulo en el que te lo cuento. ENLACES DE INTERÉS Wild Horses de los Rolling Stones en Spotify Mesa de mezclas Behringer Xenyx 502 UCA200 Soundblaster Audigy 2NX Micro Behringer XM8500 INFORMACIÓN Y DATOS DE CONTACTO· Twitter: @SansaTwit e-mail: info@unicorn-st.es www.podcrastinando.es www.unicorn-st.com www.wintablet.info www.genide.es Grupo Telegram Unicorn ST http://bit.ly/GrupoTelegramUnicornST Suscríbete a Podcrastinando, el feed que contiene todos mis podcast www.podcrastinando.es http://feeds.feedburner.com/Podcrastinando Podcast asociado a la red de SOSPECHOSOS HABITUALES. Suscríbete con este feed: https://feedpress.me/sospechososhabituales Podcast grabado en Audacity con micro Behringer XM8500 y mesa de mezclas Behringer Xenyx 502 en un Dell XPS 13 --- Send in a voice message: https://anchor.fm/podcrastinando/message
Ya que estaba haciendo pruebas con mi recientemente adquirida mesa de mezclas Behringer Xenyx 502, he grabado este capítulo en el que te lo cuento. ENLACES DE INTERÉS Wild Horses de los Rolling Stones en Spotify Mesa de mezclas Behringer Xenyx 502 UCA200 Soundblaster Audigy 2NX Micro Behringer XM8500 INFORMACIÓN Y DATOS DE CONTACTO· Twitter: @SansaTwit e-mail: info@unicorn-st.es www.podcrastinando.es www.unicorn-st.com www.wintablet.info www.genide.es Grupo Telegram Unicorn ST http://bit.ly/GrupoTelegramUnicornST Suscríbete a Podcrastinando, el feed que contiene todos mis podcast www.podcrastinando.es http://feeds.feedburner.com/Podcrastinando Podcast asociado a la red de SOSPECHOSOS HABITUALES. Suscríbete con este feed: https://feedpress.me/sospechososhabituales Podcast grabado en Audacity con micro Behringer XM8500 y mesa de mezclas Behringer Xenyx 502 en un Dell XPS 13 --- Send in a voice message: https://anchor.fm/podcrastinando/message
Ya que estaba haciendo pruebas con mi recientemente adquirida mesa de mezclas Behringer Xenyx 502, he grabado este capítulo en el que te lo cuento. ENLACES DE INTERÉS Wild Horses de los Rolling Stones en Spotify Mesa de mezclas Behringer Xenyx 502 UCA200 Soundblaster Audigy 2NX Micro Behringer XM8500 INFORMACIÓN Y DATOS DE CONTACTO· Twitter: @SansaTwit e-mail: info@unicorn-st.es www.podcrastinando.es www.unicorn-st.com www.wintablet.info www.genide.es Grupo Telegram Unicorn ST http://bit.ly/GrupoTelegramUnicornST Suscríbete a Podcrastinando, el feed que contiene todos mis podcast www.podcrastinando.es http://feeds.feedburner.com/Podcrastinando Podcast asociado a la red de SOSPECHOSOS HABITUALES. Suscríbete con este feed: https://feedpress.me/sospechososhabituales Podcast grabado en Audacity con micro Behringer XM8500 y mesa de mezclas Behringer Xenyx 502 en un Dell XPS 13 --- Send in a voice message: https://anchor.fm/podcrastinando/message
My guest is Andrew Gelina - host of Underserved (a podcast aimed at the tech industry) and CEO of the software consulting firm Syrinx. We discussed so much: Shure SM7b (love/hate relationship) Shure SM58's All mics go through Cloudlifters, SM7B also goes through a dbx 286s Behringer Xenyx 1832 mostly just for mix minus to two dedicated Skype machines Zoom-Zoom setup (H6 as primary recorder of all vox on separate channels, H5 as a backup off the mixer/backup mode -12db as well) Copy 48K/24 bit WAVs off Zooms to a Dell Windows 10 PC (desktop, 4 monitors), import into Reaper WAVs rendered, converted to MP3, upload to Libsyn for distribution to everywhere, and use Libsyn for podcast website too. Backblaze for backups, Microsoft OneDrive for syncing, and a Macbook Pro laptop for working on editing mobile and experimenting with video. Started with Audacity for an episode, then learned Reaper Normalize each track separately to -23 LUFS with SWS Extension (free) Auto Trim / Split Silence 250 ms -32db (Reaper built-in) on all tracks Custom LUA script I had built by Raymond Radet (https://www.extremraym.com/) to do a Truncate Silence like Audacity, similar to Overcast’s Smart Speed Each track has iZotope RX 7 voice denoise, breath control, de-ess, mouth click, plosive, adjusted as needed (paid) Sonible Smart EQ – learn each track’s voice separately. (paid) AWESOME Dugan-style automixer script (free) https://forum.cockos.com/showthread.php?t=173289 Master channel: Ozone 8 to add a little air, Tri-Leveler 2 (free) to get to -16 LUFS, Limiter, Loudness meter Render to 48K/24 bit mono wav, watch peaks. Custom Python script watches /renders directory, converts WAVs to MP3 using ffmpeg (yes, LAME encoder, I know) and copies out to my private www server for QA. Second pass of editing I work backwards using timestamped notes to avoid shifting things out from under myself. Libsyn – I think they update tags IN the mp3 FROM their data, not the other way around. I checked in VLC. Other Audacity holdover. I would love to help you make Reaper your home – no Sound Forge or separate RX 7 needed! Multi-platform Reaper editing is interesting – use OneDrive to allow bouncing back and forth between Windows and Mac editing the same episode/files. Relative paths turned on, copy to /Media. VST paths set for both Win/Mac. Export complete configuration from Reaper (Win) to Reaper (Mac). Andrew's Favorite PES episodes/guests: Mike Delgaudio, Dan Dugan, Dan Gonzalez My kids can now recite Barry lines when they hear them drop in the car Thanks for being a great guest, Andrew! DID YOU KNOW........We exist for the purpose of helping you, so please comment below with any questions or remarks. We appreciate you listening. Want to Start a Business or Have a Career as a Podcast Producer/Engineer? Listen and Subscribe in Apple Podcasts, Spotify, Google Podcasts, iHeartRadio, Stitcher, TuneIn, Android, RSS, Email
On episode 183 of the BSP, I analyze YouTube banning 17,000 channels for hate speech over a 3 month period, YouTube disabling all comments and notifications for channels that create content for children, and much more. Subscribe to the full audio podcast at http://www.bandrewsays.com Gear Used This Episode (Affiliate Links): Shure Sm7b: https://geni.us/shuresm7b Universal Audio LA610 MKII: http://bit.ly/2MBhwLA Universal Audio Arrow: https://geni.us/uaarrow Sony MDR7506: https://geni.us/7506 Twitter: @bandrewsays Ask Questions: AskBandrew@gmail.com Merch; https://teespring.com/stores/podcastage-store Discord: http://discord.podcastage.com 00:00 - Intro 01:10 - YouTube Bans 17,000 Channels for Hate Speech YouTube Blog: https://youtube.googleblog.com/2019/09/the-four-rs-of-responsibility-remove.html Community Guidelines Enforcement: https://transparencyreport.google.com/youtube-policy/removals?hl=en Hate Speech Policy: https://support.google.com/youtube/answer/2801939?hl=en 11:05 - YouTube Disabling Comments & Notifications for Videos Targeting Children YouTube Blog About Policy Surrounding Kids: https://youtube.googleblog.com/2019/09/an-update-on-kids.html 16:52 - WYHTS: YouTube Deranks Indie Political Commentary Channels 18:32 - WYHTS: Bandrew Doesn’t Understand Marketing AT ALL! 19:58 - WYHTS: Why Was this Dislikes!? 21:18 - WYHTS: Who Wrote the Script of the BM800 Marketing Video? 22:04 - WYHTS: We NEED Higher Interest Rates! 25:20 - Ask Bandrew 25:47 - Email 1 26:04 - Difference Between Movo LV4, LV6, and LV8 https://www.movophoto.com/blogs/movo-photo-blog/best-xlr-lavalier-mic-by-movo 27:31 - Email 2 27:49 - Are the Behringer Xenyx 802 and Scarlett Interfaces the Same? 31:20 - Email 3 32:31 - External Mic Options for Action Cameras? 35:11 - Movies of the Week 35:25 - The Elephant Man (1980) 40:09 - Outro
That's right I learned how to set up a Behringer Xenyx 802 mixer with a UCA 222 to get the sound just right in the MacBook Pro. I think it sounds great. I also learned how to wire a phone into the board so the sound turns out great. Please check out my YouTube page under my name Joshua Peek or the code name dhswpea. I'm not sure how to change that, if anyone knows, please let me know. Thanks for listening. Please rate, review, subscribe, and share with your friends and family. If you want to be part of the conversation, let me know. We'll figure it out together. :) --- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app --- Send in a voice message: https://anchor.fm/joshua-peek/message Support this podcast: https://anchor.fm/joshua-peek/support
In this episode I review my favorite mixer that I've been using for 5 years.
Nick Seuberling from Cincinnati Soccer Talk joins us this week as Dave dusts off his award 2:15 Gear Talk: HOw do you record multiple people on location on the road? Nick is using the BEHRINGER XENYX 1002B 09:15 Quitting a show that is getting thousands of downloads per episode 17:10 Thanks to Our Awesome Supporters on Patreon. Become an Awesome Support and keep the lights on 18:30 Spotify is creating a new format for podcasts that mixes images with audio.... 24:50 Spotify is boosting podcast listening 26:00 Libsyn new stats question. Total Downloads? 32:20 What tools do you use to take live callers? Nick uses Callinstudio.com, Wirecast, Joicaster 35:35 Dave gets a sales call 37:00 Dave has his cell phone plugged into his mixer using Magic Jack 38:40 Podcasting on the Road 42:15 Nick likes the Tascam DR-40 Portable Recorder ($179) 43:30 Saramonic Smartrig ($99) to plug a microphone into the Phone. 46"55 Nicks Headset is an Audio Technica BPHS1 51:30 You don't need to make money with your show 8% of podcasters get enough downloads to get a major sponsor Mentioned in this show Ham Radio 360 Screaming Eagles on Spotify Overcast.fm
TrueOS stable 17.12 is out, we have an OpenBSD workstation guide for you, learnings from the PDP-11, FreeBSD 2017 Releng recap and Duo SSH. This episode was brought to you by Headlines TrueOS stable release 17.12 (https://www.trueos.org/blog/trueos-17-12-release/) We are pleased to announce a new release of the 6-month STABLE version of TrueOS! This release cycle focused on lots of cleanup and stabilization of the distinguishing features of TrueOS: OpenRC, boot speed, removable-device management, SysAdm API integrations, Lumina improvements, and more. We have also been working quite a bit on the server offering of TrueOS, and are pleased to provide new text-based server images with support for Virtualization systems such as bhyve! This allows for simple server deployments which also take advantage of the TrueOS improvements to FreeBSD such as: Sane service management and status reporting with OpenRC Reliable, non-interactive system update mechanism with fail-safe boot environment support. Graphical management of remote TrueOS servers through SysAdm (also provides a reliable API for administrating systems remotely). LibreSSL for all base SSL support. Base system managed via packages (allows for additional fine-tuning). Base system is smaller due to the removal of the old GCC version in base. Any compiler and/or version may be installed and used via packages as desired. Support for newer graphics drivers and chipsets (graphics, networking, wifi, and more) TrueOS Version 17.12 (2017, December) is now available for download from the TrueOS website. Both the STABLE and UNSTABLE package repositories have also been updated in-sync with each other, so current users only need to follow the prompts about updating their system to run the new release. We are also pleased to announce the availability of TrueOS Sponsorships! If you would like to help contribute to the project financially we now have the ability to accept both one-time donations as well as recurring monthly donations which wil help us advocate for TrueOS around the world. Thank you all for using and supporting TrueOS! Notable Changes: Over 1100 OpenRC services have been created for 3rd-party packages. This should ensure the functionality of nearly all available 3rd-party packages that install/use their own services. The OpenRC services for FreeBSD itself have been overhauled, resulting in significantly shorter boot times. Separate install images for desktops and servers (server image uses a text/console installer) Bhyve support for TrueOS Server Install FreeBSD base is synced with 12.0-CURRENT as of December 4th, 2017 (Github commit: 209d01f) FreeBSD ports tree is synced as of November 30th (pre-FLAVOR changes) Lumina Desktop has been updated/developed from 1.3.0 to 1.4.1 PCDM now supports multiple simultaneous graphical sessions Removable devices are now managed through the “automounter” service. Devices are “announced” as available to the system via *.desktop shortcuts in /media. These shortcuts also contain a variety of optional “Actions” that may be performed on the device. Devices are only mounted while they are being used (such as when browsing via the command line or a file manager). Devices are automatically unmounted as soon as they stop being accessed. Integrated support for all major filesystems (UFS, EXT, FAT, NTFS, ExFAT, etc..) NOTE: The Lumina desktop is the only one which supports this functionality at the present time. The TrueOS update system has moved to an “active” update backend. This means that the user will need to actually start the update process by clicking the “Update Now” button in SysAdm, Lumina, or PCDM (as well as the command-line option). The staging of the update files is still performed automatically by default but this (and many other options) can be easily changed in the “Update Manager” settings as desired. Known Errata: [VirtualBox] Running FreeBSD within a VirtualBox VM is known to occasionally receive non-existent mouse clicks – particularly when using a scroll wheel or two-finger scroll. Quick Links: TrueOS Forums (https://discourse.trueos.org/) TrueOS Bugs (https://github.com/trueos/trueos-core/issues) TrueOS Handbook (https://www.trueos.org/handbook/trueos.html) TrueOS Community Chat on Telegram (https://t.me/TrueOSCommunity) *** OpenBSD Workstation Guide (https://begriffs.com/posts/2017-05-17-linux-workstation-guide.html) Design Goals User actions should complete instantaneously. While I understand if compiling code and rendering videos takes time, opening programs and moving windows should have no observable delay. The system should use minimalist tools. Corollary: cache data offline when possible. Everything from OpenStreetMaps to StackExchange can be stored locally. No reason to repeatedly hit the internet to query them. This also improves privacy because the initial download is indiscriminate and doesn't reveal personal queries or patterns of computer activity. No idling program should use a perceptible amount of CPU. Why does CalendarAgent on my Macbook sometimes use 150% CPU for fifteen minutes? Who knows. Why are background ChromeHelpers chugging along at upper-single-digit CPU? I didn't realize that holding a rendered DOM could be so challenging. Avoid interpreted languages, web-based desktop apps, and JavaScript garbage. There, I said it. Take your Electron apps with you to /dev/null! Stability. Old fashioned programs on a conservative OS on quality mainstream hardware. There are enough challenges to tackle without a bleeding edge system being one of them. Delegate to quality hardware components. Why use a janky ncurses software audio mixer when you can use…an actual audio mixer? Hardware privacy. No cameras or microphones that I can't physically disconnect. Also real hardware protection for cryptographic keys. Software privacy. Commercial software and operating systems have gotten so terrible about this. I even catch Mac command line tools trying to call Google Analytics. Sorry homebrew, your cute emojis don't make up for the surveillance. The Hardware Core To get the best hardware for the money I'm opting for a desktop computer. Haven't had one since the early 2000s and it feels anachronistic, but it will outperform a laptop of similar cost. After much searching, I found the HP Z240 Tower Workstation. It's no-nonsense and supports exactly the customizations I was looking for: No operating system pre-loaded (Cut out the “Windows tax”) Intel Xeon E3-1270 v6 processor (Supports ECC ram) 16 GB (2x8 GB) DDR4-2400 ECC Unbuffered memory (2400Mhz is the full memory clock speed supported by the Xeon) 256 GB HP Z Turbo Drive G2 PCIe SSD (Uses NVMe rather than SATA for faster throughput, supported by nvme(4)) No graphics card (We'll add our own) Intel® Ethernet I210-T1 PCIe (Supported by em(4)) A modest discrete video card will enable 2D Glamor acceleration on X11. The Radeon HD 6450 (sold separately) is fanless and listed as supported by radeon(4). Why build a solid computer and not protect it? Externally, the APC BR1300G UPS will protect the system from power surges and abrupt shutdowns. Peripherals The Matias Ergo Pro uses mechanical switches for that old fashioned clicky sound. It also includes dedicated buttons along the side for copying and pasting. Why is that cool? Well, it improves secondary selection, a technique that Sun computers used but time forgot. Since we're talking about a home office workstation, you may want a printer. The higher quality printers speak PostScript and PDF natively. Unix machines connect to them on TCP port 9100 and send PostScript commands directly. (You can print via telnet if you know the commands!) The Brother HL-L5100DN is a duplex LaserJet which allows that “raw” TCP printing. Audio/Video I know a lot of people enjoy surrounding themselves with a wall of monitors like they're in the heart of NASA Mission Control, but I find multi-monitor setups slightly disorienting. It introduces an extra bit of cognitive overhead to determine which monitor is for what exactly. That's why I'd go with a modest, crisp Dell UltraSharp 24" U2417H. It's 1080p and yeah there are 4k monitors nowadays, but text and icons are small enough as it is for me! If I ever considered a second monitor it would be e-ink for comfortably reading electronic copies of books or long articles. The price is currently too high to justify the purchase, but the most promising monitor seems to be the Dasung Paperlike. In the other direction, video input, it's more flexible to use a general-purpose HDMI capture box like the Rongyuxuan than settle on a particular webcam. This allows hooking up a real camera, or any other video device. Although the motherboard for this system has built-in audio, we should use a card with better OpenBSD support. The WBTUO PCIe card uses a C-Media CMI8768 chipset, handled by cmpci(4). The card provides S/PDIFF in and out ports if you ever want to use an external DAC or ADC. The way to connect it with other things is with a dedicated hardware mixer. The Behringer Xenyx 802 has all the connections needed, and the ability to route audio to and from the computer and a variety of devices at once. The mixer may seem an odd peripheral, but I want to mix the computer with an old fashioned CD player, ham radio gear, and amplifier so this unifies the audio setup. When doing remote pair programming or video team meetings it's nice to have a quality microphone. The best ones for this kind of work are directional, with a cardioid reception pattern. The MXL 770 condenser mic is perfect, and uses a powered XLR connection supplied by the mixer. Backups We're going dead simple and old-school, back to tapes. There are a set of tape standards called LTO-n. As n increases the tape capacity gets bigger, but the tape drive gets more expensive. In my opinion the best balance these days for the home user is LTO-3. You can usually find an HP Ultrium 960 LTO-3 on eBay for 150 dollars. The cartridges hold 800GB and are about 15 dollars apiece. Hard drives keep coming down in price, but these tapes are very cheap and simpler than keeping a bunch of disk drives. Also tape has proven longevity, and good recoverability. To use old fashioned tech like this you need a SCSI host bus adapter like the Adaptec 29320LPE, supported by ahd(4). Cryptography You don't want to generate and store secret keys on a general purpose network attached computer. The attack surface is a mile wide. Generating or manipulating “offline” secret keys needs to happen on a separate computer with no network access. Little boards like the Raspberry Pi would be good except they use ARM processors (incompatible with Tails OS) and have wifi. The JaguarBoard is a small x86 machine with no wireless capability. Just switch the keyboard and monitor over to this machine for your “cleanroom.” jaguar board: Generating keys requires entropy. The Linux kernel on Tails samples system properties to generate randomness, but why not help it out with a dedicated true random number generator (TRNG)? Bit Babbler supplies pure randomness at a high bitrate through USB. (OneRNG works better on the OpenBSD main system, via uonerng(4).) bit babbler: This little computer will save its results onto a OpenPGP Smartcard V2.1. This card provides write-only access to keys, and computes cryptographic primitives internally to sign and encrypt messages. To use it with a regular computer, hook up a Cherry ST2000 card reader. This reader has a PIN pad built in, so no keylogger on the main computer could even obtain your decryption PIN. The Software We take the beefed up hardware above and pair it with ninja-fast software written in C. Some text-based, others raw X11 graphical apps unencumbered by ties to any specific window manager. I'd advise OpenBSD for the underlying operating system, not a Linux. OpenBSD has greater internal consistency, their man pages are impeccable, and they make it a priority to prune old code to keep the system minimal. What Have We Learned from the PDP-11? (https://dave.cheney.net/2017/12/04/what-have-we-learned-from-the-pdp-11) The paper I have chosen tonight is a retrospective on a computer design. It is one of a series of papers by Gordon Bell, and various co-authors, spanning the design, growth, and eventual replacement of the companies iconic line of PDP-11 mini computers. This year represents the 60th anniversary of the founding of the company that produced the PDP-11. It is also 40 years since this paper was written, so I thought it would be entertaining to review Bell's retrospective through the lens of our own 20/20 hindsight. To set the scene for this paper, first we should talk a little about the company that produced the PDP-11, the Digital Equipment Corporation of Maynard, Massachusetts. Better known as DEC. It's also worth noting that the name PDP is an acronym for “Programmed Data Processor”, as at the time, computers had a reputation of being large, complicated, and expensive machines, and DEC's venture capitalists would not support them if they built a “computer” A computer is not solely determined by its architecture; it reflects the technological, economic, and human aspects of the environment in which it was designed and built. […] The finished computer is a product of the total design environment. “Right from the get go, Bell is letting us know that the success of any computer project is not abstractly building the best computer but building the right computer, and that takes context.” It is the nature of computer engineering to be goal-oriented, with pressure to produce deliverable products. It is therefore difficult to plan for an extensive lifetime. Because of the open nature of the PDP-11, anything which interpreted the instructions according to the processor specification, was a PDP-11, so there had been a rush within DEC, once it was clear that the PDP-11 market was heating up, to build implementations; you had different groups building fast, expensive ones and cost reduced slower ones The first weakness of minicomputers was their limited addressing capability. The biggest (and most common) mistake that can be made in a computer design is that of not providing enough address bits for memory addressing and management. A second weakness of minicomputers was their tendency not to have enough registers. This was corrected for the PDP-11 by providing eight 16-bit registers. Later, six 32-bit registers were added for floating-point arithmetic. […] More registers would increase the multiprogramming context switch time and confuse the user. “It's also interesting to note Bell's concern that additional registers would confuse the user. In the early 1970's the assumption that the machine would be programmed directly in assembly was still the prevailing mindset.” A third weakness of minicomputers was their lack of hardware stack capability. In the PDP-11, this was solved with the autoincrement/autodecrement addressing mechanism. This solution is unique to the PDP-11 and has proven to be exceptionally useful. (In fact, it has been copied by other designers.) “Nowadays it's hard to imagine hardware that doesn't have a notion of a stack, but consider that a stack isn't important if you don't need recursion.” “The design for the PDP-11 was laid down in 1969 and if we look at the programming languages of the time, FORTRAN and COBOL, neither supported recursive function calls. The function call sequence would often store the return address at a blank word at the start of the procedure making recursion impossible.” A fourth weakness, limited interrupt capability and slow context switching, was essentially solved with the device of UNIBUS interrupt vectors, which direct device interrupts. The basic mechanism is very fast, requiring only four memory cycles from the time an interrupt request is issued until the first instruction of the interrupt routine begins execution. A fifth weakness of prior minicomputers, inadequate character-handling capability, was met in the PDP-11 by providing direct byte addressing capability. “Strings and character handling were of increasing importance during the 1960's as scientific and business computing converged. The predominant character encodings at the time were 6 bit character sets which provided just enough space for upper case letters, the digits 0 to 9, space, and a few punctuation characters sufficient for printing financial reports.” “Because memory was so expensive, placing one 6 bit character into a 12 or 18 bit word was simply unacceptable so characters would be packed into words. This proved efficient for storage, but complex for operations like move, compare, and concatenate, which had to account for a character appearing in the top or bottom of the word, expending valuable words of program storage to cope.” “The problem was addressed in the PDP-11 by allowing the machine to operate on memory as both a 16-bit word, and the increasingly popular 8-bit byte. The expenditure of 2 additional bits per character was felt to be worth it for simpler string handling, and also eased the adoption of the increasingly popular 7-bit ASCII standard of which DEC were a proponent at the time. Bell concludes this point with the throw away line:” Although string instructions are not yet provided in the hardware, the common string operations (move, compare, concatenate) can be programmed with very short loops. A sixth weakness, the inability to use read-only memories, was avoided in the PDP-11. Most code written for the PDP-11 tends to be pure and reentrant without special effort by the programmer, allowing a read-only memory (ROM) to be used directly. A seventh weakness, one common to many minicomputers, was primitive I/O capabilities. A ninth weakness of minicomputers was the high cost of programming them. Many users program in assembly language, without the comfortable environment of editors, file systems, and debuggers available on bigger systems. The PDP-11 does not seem to have overcome this weakness, although it appears that more complex systems are being built successfully with the PDP-11 than with its predecessors, the PDP-8 and PDP-15. The problems faced by computer designers can usually be attributed to one of two causes: inexperience or second-systemitis Before the PDP-11, there was no UNIX. Before the PDP-11, there was no C, this is the computer that C was designed on. If you want to know why the classical C int is 16 bits wide, it's because of the PDP-11. UNIX bought us ideas such as pipes, everything is a file, and interactive computing. UNIX, which had arrived at Berkley in 1974 aboard a tape carried by Ken Thompson, would evolve into the west coast flavoured Berkley Systems Distribution. Berkeley UNIX had been ported to the VAX by the start of the 1980's and was thriving as the counter cultural alternative to DEC's own VMS operating system. Berkeley UNIX spawned a new generation of hackers who would go on to form companies like Sun micro systems, and languages like Self, which lead directly to the development of Java. UNIX was ported to a bewildering array of computer systems during the 80's and the fallout from the UNIX wars gave us the various BSD operating systems who continue to this day. The article, and the papers it is summarizing, contain a lot more than we could possibly dig into even if we dedicated the entire show to the topic *** News Roundup Two-factor authentication SSH with Duo in FreeBSD 11 (https://www.teachnix.com/2017/11/29/configuring-two-factor-authentication-on-freebsd-with-duo/) This setup uses an SSH key as the first factor of authentication. Please watch Part 1 on setting up SSH keys and how to scp it to your server. Video guide (https://www.youtube.com/watch?v=E5EuvF-iaV0) Register for a free account at Duo.com Install the Duo package on your FreeBSD server pkg install -y duo Log into the Duo site > Applications > Protect an Application > Search for Unix application > Protect this Application This will generate the keys we need to configure Duo. Edit the Duo config file using the course notes template vi /usr/local/etc/pam_duo.conf Example config [duo] ; Duo integration key ikey = Integration key goes here ; Duo secret key skey = Secret key goes here ; Duo API host host = API hostname goes here Change the permissions of the Duo config file. If the permissions are not correct then the service will not function properly. chmod 600 /usr/local/etc/pam_duo.conf Edit the SSHD config file using the course notes template vi /etc/ssh/sshd_config Example config ListenAddress 0.0.0.0 Port 22 PasswordAuthentication no UsePAM yes ChallengeResponseAuthentication yes UseDNS no PermitRootLogin yes AuthenticationMethods publickey,keyboard-interactive Edit PAM to configure SSHD for Duo using the course notes template Example config ``` # auth auth sufficient pamopie.so nowarn nofakeprompts auth requisite pamopieaccess.so nowarn allowlocal auth required /usr/local/lib/security/pamduo.so # session # session optional pamssh.so wantagent session required pam_permit.so # password # password sufficient pamkrb5.so nowarn tryfirstpass password required pamunix.so nowarn tryfirstpass ``` Restart the sshd service service sshd restart SSH into your FreeBSD server and follow the link it outputs to enroll your phone with Duo. ssh server.example.com SSH into your server again ssh server.example.com Choose your preferred method and it should log you into your server. FreeBSD 2017 Release Engineering Recap (https://www.freebsdfoundation.org/blog/2017-release-engineering-recap/) This past year was undoubtedly a rather busy and successful year for the Release Engineering Team. Throughout the year, development snapshot builds for FreeBSD-CURRENT and supported FreeBSD-STABLE branches were continually provided. In addition, work to package the base system using pkg(8) continued throughout the year and remains ongoing. The FreeBSD Release Engineering Team worked on the FreeBSD 11.1-RELEASE, with the code slush starting mid-May. The FreeBSD 11.1-RELEASE cycle stayed on schedule, with the final release build starting July 21, and the final release announcement following on July 25, building upon the stability and reliability of 11.0-RELEASE. Milestones during the 11.1-RELEASE cycle can be found on the 11.1 schedule page (https://www.freebsd.org/releases/11.1R/schedule.html). The final announcement is available here (https://www.freebsd.org/releases/11.1R/announce.html). The FreeBSD Release Engineering Team started the FreeBSD 10.4-RELEASE cycle, led by Marius Strobl. The FreeBSD 10.4-RELEASE cycle continued on schedule, with the only adjustments to the schedule being the addition of BETA4 and the removal of RC3. FreeBSD 10.4-RELEASE builds upon the stability and reliability of FreeBSD 10.3-RELEASE, and is planned to be the final release from the stable/10 branch. Milestones during the 10.4-RELEASE cycle can be found on the 10.4 schedule page (https://www.freebsd.org/releases/10.4R/schedule.html). The final announcement is available here (https://www.freebsd.org/releases/10.4R/announce.html). In addition to these releases, support for additional arm single-board computer images were added, notably Raspberry Pi 3 and Pine64. Additionally, release-related documentation effective 12.0-RELEASE and later has been moved from the base system repository to the documentation repository, making it possible to update related documentation as necessary post-release. Additionally, the FreeBSD Release Engineering article in the Project Handbook had been rewritten to outline current practices used by the Release Engineering Team. For more information on the procedures and processes the FreeBSD Release Engineering Team follows, the new article is available here and continually updated as procedures change. Finally, following the availability of FreeBSD 11.1-RELEASE, Glen Barber attended the September Developer Summit hosted at vBSDCon in Reston, VA, USA, where he gave a brief talk comprising of several points relating directly to the 11.1-RELEASE cycle. In particular, some of the points covered included what he felt went well during the release cycle, what did not go as well as it could have, and what we, as a Project, could do better to improve the release process. The slides from the talk are available in the FreeBSD Wiki. During the question and answer time following the talk, some questions asked included: Q: Should developers use the ‘Relnotes' tag in the Subversion commit template more loosely, at risk of an increase in false positives. A: When asked when the tag in the template was initially added, the answer would have been “no”, however in hindsight it is easier to sift through the false positives, than to comb through months or years of commit logs. Q: What issues are present preventing moving release-related documentation to the documentation repository? A: There were some rendering issues last time it was investigated, but it is really nothing more than taking the time to fix those issues. (Note, that since this talk, the migration of the documentation in question had moved.) Q: Does it make sense to extend the timeframe between milestone builds during a release cycle from one week to two weeks, to allow more time for testing, for example, RC1 versus RC2? A: No. It would extend the length of the release cycle with no real benefit between milestones since as we draw nearer to the end of a given release cycle, the number of changes to that code base significantly reduce. FLIMP - GIMP Exploit on FreeBSD (https://flimp.fuzzing-project.org) In 2014, when starting the Fuzzing Project (https://fuzzing-project.org/), Hanno Böck did some primitive fuzzing on GIMP and reported two bugs. They weren't fixed and were forgotten in the public bug tracker. Recently Tobias Stöckmann found one of these bugs (https://bugzilla.gnome.org/show_bug.cgi?id=739133) (CVE-2017-17785) and figured out that it's easy to exploit. What kind of bug is that? It's a classic heap buffer overflow in the FLIC parser. FLIC is a file format for animations and was introduced by Autodesk Animator. How does the exploit work? Tobias has created a detailed writeup (https://flimp.fuzzing-project.org/exploit.html). The exploit doesn't work for me! We figured out it's unreliable and the memory addresses are depending on many circumstances. The exploit ZIP comes with two variations using different memory addresses. Try both of them. We also noticed putting the files in a subdirectory sometimes made the exploit work. Anything more to tell about the GIMP? There's a wide variety of graphics formats. GIMP tries to support many of them, including many legacy formats that nobody is using any more today. While this has obvious advantages - you can access the old images you may find on a backup CD from 1995 - it comes with risks. Support for many obscure file formats means many parsers that hardly anyone ever looks at. So... what about the other parsers? The second bug (https://bugzilla.gnome.org/show_bug.cgi?id=739134) (CVE-2017-17786), which is a simple overread, was in the TGA parser. Furthermore we found buffer overreads in the XCF parser (https://bugzilla.gnome.org/show_bug.cgi?id=790783) (CVE-2017-17788), the Gimp Brush (GBR) parser (https://bugzilla.gnome.org/show_bug.cgi?id=790784) (CVE-2017-17784) and the Paint Shop Pro (PSP) parser (https://bugzilla.gnome.org/show_bug.cgi?id=790849) (CVE-2017-17789). We found another Heap buffer overflow (https://bugzilla.gnome.org/show_bug.cgi?id=790849) in the Paint Shop Pro parser (CVE-2017-17787) which is probably also exploitable. In other words: The GIMP import parsers are full of memory safety bugs. What should happen? First of all obviously all known memory safety bugs should be fixed. Furthermore we believe the way GIMP plugins work is not ideal for security testing. The plug-ins are separate executables, however they can't be executed on their own, as they communicate with the main GIMP process. Ideally either these plug-ins should be changed in a way that allows running them directly from the command line or - even better - they should be turned into libraries. The latter would also have the advantage of making the parser code useable for other software projects. Finally it might be a good idea to sandbox the import parsers. Dell FS12-NV7 Review – Bargain FreeBSD/ZFS box (http://blog.frankleonhardt.com/2017/dell-fs12-nv7-review-bargain-freebsdzfs-box/) It seems just about everyone selling refurbished data centre kit has a load of Dell FS12-NV7's to flog. Dell FS-what? You won't find them in the Dell catalogue, that's for sure. They look a bit like C2100s of some vintage, and they have a lot in common. But on closer inspection they're obviously a “special” for an important customer. Given the number of them knocking around, it's obviously a customer with big data, centres stuffed full of servers with a lot of processing to do. Here's a hint: It's not Google or Amazon. So, should you be buying a weirdo box with no documentation whatsoever? I'd say yes, definitely. If you're interests are anything like mine. In a 2U box you can get twin 4-core CPUs and 64Gb of RAM for £150 or less. What's not to like? Ah yes, the complete lack of documentation. Over the next few weeks I intend to cover that. And to start off this is my first PC review for nearly twenty years. As I mentioned, it's a 2U full length heavy metal box on rails. On the back there are the usual I/O ports: a 9-way RS-232, VGA, two 1Gb Ethernet, two USB2 and a PS/2 keyboard and mouse. The front is taken up by twelve 3.5″ hard drive bays, with the status lights and power button on one of the mounting ears to make room. Unlike other Dell servers, all the connections are on the back, only. So, in summary, you're getting a lot for your money if its the kind of thing you want. It's ideal as a high-performance Unix box with plenty of drive bays (preferably running BSD and ZFS). In this configuration it really shifts. Major bang-per-buck. Another idea I've had is using it for a flight simulator. That's a lot of RAM and processors for the money. If you forego the SAS controllers in the PCIe slots and dump in a decent graphics card and sound board, it's hard to see what's could be better (and you get jet engine sound effects without a speaker). So who should buy one of these? BSD geeks is the obvious answer. With a bit of tweaking they're a dream. It can build-absolutely-everything in 20-30 minutes. For storage you can put fast SAS drives in and it goes like the wind, even at 3Gb bandwidth per drive. I don't know if it works with FreeNAS but I can't see why not – I'm using mostly FreeBSD 11.1 and the generic kernel is fine. And if you want to run a load of weird operating systems (like Windows XP) in VM format, it seems to work very well with the Xen hypervisor and Dom0 under FreeBSD. Or CentOS if you prefer. So I shall end this review in true PCW style: Pros: Cheap Lots of CPUs, Lots of RAM Lots of HD slots Great for BSD/ZFS or VMs Cons: Noisy no AES-NI SAS needs upgrading Limited PCI slots As I've mentioned, the noise and SAS are easy and relatively cheap to fix, and thanks to BitCoin miners, even the PCI slot problem can be sorted. I'll talk about this in a later post. Beastie Bits Reflections on Hackathons (https://undeadly.org/cgi?action=article;sid=20171126090055) 7-Part Video Crash Course on SaltStack For FreeBSD (https://www.youtube.com/watch?v=HijG0hWebZk&list=PL5yV8umka8YQOr1wm719In5LITdGzQMOF) The LLVM Thread Sanitizer has been ported to NetBSD (https://blog.netbsd.org/tnf/entry/the_llvm_thread_sanitizer_has) The First Unix Port (1998) (http://bitsavers.informatik.uni-stuttgart.de/bits/Interdata/32bit/unix/univWollongong_v6/miller.pdf) arm64 platform now officially supported [and has syspatch(8)] (https://undeadly.org/cgi?action=article;sid=20171208082238) BSDCan 2018 Call for Participation (https://www.freebsdfoundation.org/news-and-events/call-for-papers/bsdcan-2018-call-for-participation/) AsiaBSDCon 2018 Call for Papers (https://www.freebsdfoundation.org/news-and-events/call-for-papers/asiabsdcon-2018-call-for-papers/) *** Feedback/Questions Shawn - DragonFlyBSD vagrant images (http://dpaste.com/3PRPJHG#wrap) Ben - undermydesk (http://dpaste.com/0AZ32ZB#wrap) Ken - Conferences (http://dpaste.com/3E8FQC6#wrap) Ben - ssh keys (http://dpaste.com/0E4538Q#wrap) SSH Chaining (https://www.bsdnow.tv/tutorials/ssh-chaining) ***
My Ruby Story with Charles Max Wood This week’s episode is a bit different. Charles Max Wood interviews… Charles Max Wood! Hear a bit about how Charles’ grandfather inspired him towards his career in programing, how handling technical support for Mozy somehow led him to writing Ruby code, and hear a bit about what he is working on now! Stay tuned. How did you get into Programming? Charles talks about remembering some of his first programming exposure as far back as second grade. He talks about programming the iconic turtle to move around on the screen and draw shapes. Later on he had more experience in a particular Math class in high school, this time Pascal, then of course the TI-85. Inspired by his Grandfather Charles gives a bit of a background story on his inspiration for taking electronics classes in school, his Grandfather. His Grandfather was an inventor that created various inventions, including tools used in the manufacturing of rocket boosters for the NASA Space Shuttle. Charles became very interested in electronics and took his first electronic class. Electrical engineering in College Charles then attended Brigam Young University majoring in Electrical Engineering, giving him even further chances to experience programming. To Charles, programming seemed fun but didn’t feel serious enough to hold weight as his career. His interest grew in computers. He eventually switches to Computer Engineering and graduates, also picking up a job in the office of information technology at BYU. Programming gets more serious Charles talks about how programming in college tended to lean towards games and fun projects, and it wasn’t until after college that the projects that he got involved with felt as if the work he was doing meant something. From building a system to help college students find apartments that fit their needs, to Bash scripts that made some of the IT updates at BYU faster and safer. His first job with Ruby on Rails Charles then lands a job with Mozy, the popular online backup service. Mozy’s systems were all running with Ruby on Rails and Charles worked as Technical Support. Mozy gets publicity in The Wall Street Journal, increasing the Technical Support workload. Charles then writes a Ruby on Rails system that created a smoother flow when cycling through emails. He soon added extra features like canned responses and a way to measure how often canned responses were sent as a way to highlight any particular issues Mozy was having. Shifting into Podcasting Charles talks about switching from a Management position to a developer track and working with a man name Don, who had an original iPod and listened to podcasts. Introducing him to Rails Envy, a podcast by Jason Seifer and Gregg Pollack. After emailing Gregg, to Charles’ surprise he responds and encourages him to start his own podcast. Charles talks about how he feels his main contribution to the Ruby community is his podcast. Since then he has had a chance to interview some really influential people, including David Heinemeier Hansson, the creator of Ruby on Rails. Outside of the podcast, Charles adds that he has also taken over Teach Me To Code and has contributed a few open source libraries, one connecting to project HoneyPot, as well as contributing indirectly through his other podcast work including JavaScript Jabber, and Adventures in Angular. What are you working on now? Charles talks about hoping to get back into writing open source code and even starting a project. Charles spends most of his time doing ‘businessy’ stuff for the podcast as well as the conferences, currently working on putting together a Ruby Dev Summit. Charles talks about a few new podcast shows he is working on, including bringing some requested content like web application security, React, and Elixir. Charles talks a bit about other things he is involved in at home and creating systems to help him manage his busy workload. Picks Electro-Voice RE20 Microphone Behringer Xenyx 802 Roland EDIROL R-09 ZOOM H6 Audio Technica 2100 GetACoderJob.com Charles’ Links Devchat.tv Charles’ Twitter Devchat.tv’s Twitter Charles GitHub Chuck@devchat.tv
My Ruby Story with Charles Max Wood This week’s episode is a bit different. Charles Max Wood interviews… Charles Max Wood! Hear a bit about how Charles’ grandfather inspired him towards his career in programing, how handling technical support for Mozy somehow led him to writing Ruby code, and hear a bit about what he is working on now! Stay tuned. How did you get into Programming? Charles talks about remembering some of his first programming exposure as far back as second grade. He talks about programming the iconic turtle to move around on the screen and draw shapes. Later on he had more experience in a particular Math class in high school, this time Pascal, then of course the TI-85. Inspired by his Grandfather Charles gives a bit of a background story on his inspiration for taking electronics classes in school, his Grandfather. His Grandfather was an inventor that created various inventions, including tools used in the manufacturing of rocket boosters for the NASA Space Shuttle. Charles became very interested in electronics and took his first electronic class. Electrical engineering in College Charles then attended Brigam Young University majoring in Electrical Engineering, giving him even further chances to experience programming. To Charles, programming seemed fun but didn’t feel serious enough to hold weight as his career. His interest grew in computers. He eventually switches to Computer Engineering and graduates, also picking up a job in the office of information technology at BYU. Programming gets more serious Charles talks about how programming in college tended to lean towards games and fun projects, and it wasn’t until after college that the projects that he got involved with felt as if the work he was doing meant something. From building a system to help college students find apartments that fit their needs, to Bash scripts that made some of the IT updates at BYU faster and safer. His first job with Ruby on Rails Charles then lands a job with Mozy, the popular online backup service. Mozy’s systems were all running with Ruby on Rails and Charles worked as Technical Support. Mozy gets publicity in The Wall Street Journal, increasing the Technical Support workload. Charles then writes a Ruby on Rails system that created a smoother flow when cycling through emails. He soon added extra features like canned responses and a way to measure how often canned responses were sent as a way to highlight any particular issues Mozy was having. Shifting into Podcasting Charles talks about switching from a Management position to a developer track and working with a man name Don, who had an original iPod and listened to podcasts. Introducing him to Rails Envy, a podcast by Jason Seifer and Gregg Pollack. After emailing Gregg, to Charles’ surprise he responds and encourages him to start his own podcast. Charles talks about how he feels his main contribution to the Ruby community is his podcast. Since then he has had a chance to interview some really influential people, including David Heinemeier Hansson, the creator of Ruby on Rails. Outside of the podcast, Charles adds that he has also taken over Teach Me To Code and has contributed a few open source libraries, one connecting to project HoneyPot, as well as contributing indirectly through his other podcast work including JavaScript Jabber, and Adventures in Angular. What are you working on now? Charles talks about hoping to get back into writing open source code and even starting a project. Charles spends most of his time doing ‘businessy’ stuff for the podcast as well as the conferences, currently working on putting together a Ruby Dev Summit. Charles talks about a few new podcast shows he is working on, including bringing some requested content like web application security, React, and Elixir. Charles talks a bit about other things he is involved in at home and creating systems to help him manage his busy workload. Picks Electro-Voice RE20 Microphone Behringer Xenyx 802 Roland EDIROL R-09 ZOOM H6 Audio Technica 2100 GetACoderJob.com Charles’ Links Devchat.tv Charles’ Twitter Devchat.tv’s Twitter Charles GitHub Chuck@devchat.tv
My Ruby Story with Charles Max Wood This week’s episode is a bit different. Charles Max Wood interviews… Charles Max Wood! Hear a bit about how Charles’ grandfather inspired him towards his career in programing, how handling technical support for Mozy somehow led him to writing Ruby code, and hear a bit about what he is working on now! Stay tuned. How did you get into Programming? Charles talks about remembering some of his first programming exposure as far back as second grade. He talks about programming the iconic turtle to move around on the screen and draw shapes. Later on he had more experience in a particular Math class in high school, this time Pascal, then of course the TI-85. Inspired by his Grandfather Charles gives a bit of a background story on his inspiration for taking electronics classes in school, his Grandfather. His Grandfather was an inventor that created various inventions, including tools used in the manufacturing of rocket boosters for the NASA Space Shuttle. Charles became very interested in electronics and took his first electronic class. Electrical engineering in College Charles then attended Brigam Young University majoring in Electrical Engineering, giving him even further chances to experience programming. To Charles, programming seemed fun but didn’t feel serious enough to hold weight as his career. His interest grew in computers. He eventually switches to Computer Engineering and graduates, also picking up a job in the office of information technology at BYU. Programming gets more serious Charles talks about how programming in college tended to lean towards games and fun projects, and it wasn’t until after college that the projects that he got involved with felt as if the work he was doing meant something. From building a system to help college students find apartments that fit their needs, to Bash scripts that made some of the IT updates at BYU faster and safer. His first job with Ruby on Rails Charles then lands a job with Mozy, the popular online backup service. Mozy’s systems were all running with Ruby on Rails and Charles worked as Technical Support. Mozy gets publicity in The Wall Street Journal, increasing the Technical Support workload. Charles then writes a Ruby on Rails system that created a smoother flow when cycling through emails. He soon added extra features like canned responses and a way to measure how often canned responses were sent as a way to highlight any particular issues Mozy was having. Shifting into Podcasting Charles talks about switching from a Management position to a developer track and working with a man name Don, who had an original iPod and listened to podcasts. Introducing him to Rails Envy, a podcast by Jason Seifer and Gregg Pollack. After emailing Gregg, to Charles’ surprise he responds and encourages him to start his own podcast. Charles talks about how he feels his main contribution to the Ruby community is his podcast. Since then he has had a chance to interview some really influential people, including David Heinemeier Hansson, the creator of Ruby on Rails. Outside of the podcast, Charles adds that he has also taken over Teach Me To Code and has contributed a few open source libraries, one connecting to project HoneyPot, as well as contributing indirectly through his other podcast work including JavaScript Jabber, and Adventures in Angular. What are you working on now? Charles talks about hoping to get back into writing open source code and even starting a project. Charles spends most of his time doing ‘businessy’ stuff for the podcast as well as the conferences, currently working on putting together a Ruby Dev Summit. Charles talks about a few new podcast shows he is working on, including bringing some requested content like web application security, React, and Elixir. Charles talks a bit about other things he is involved in at home and creating systems to help him manage his busy workload. Picks Electro-Voice RE20 Microphone Behringer Xenyx 802 Roland EDIROL R-09 ZOOM H6 Audio Technica 2100 GetACoderJob.com Charles’ Links Devchat.tv Charles’ Twitter Devchat.tv’s Twitter Charles GitHub Chuck@devchat.tv
This week's podcast features the audio from our meetup on how to get good sound, featuring multimedia photojournalist Ryan Jackson of Full Circle Visuals and podcaster and video editor Chris Sikkenga. We gathered at Variant Edition Comics and Culture in June to learn more about why sound is so important, how to control the room to improve the conditions for recording, how to work the microphone to avoid common errors, how to monitor your sound along the way, and what, if anything, you can do after the fact to fix it up if you mess up. The irony is not lost on me that the sound for this is not pristine, as it was recorded on a snowball mic on a table in a room with a lot of hard surfaces. And it occurred to me after re-listening to the recording that I still haven't mastered their advice for good microphone technique. It's not terrible, but there's room for improvement. Do as they say, not as I do. This episode is also available in iTunes, on Google Play, on SoundCloud or on Stitcher. Be sure to follow Full Circle Visuals on Twitter, Facebook and Instagram. And please listen to, subscribe to and rate Chris's podcasts, Montreal Sauce and Film Frown. Thanks again to Variant Edition for technical assistance, the room and a door prize; to NeWest Press for another door prize; and to CafeRista for delicious treats. Our next meetup will be held at CafeRista (14213 103 Ave.) on Sunday, Sept. 18, at 1 pm. Save the date, and watch for details on the Edmonton Podcasting Meetup page. Here is some of the gear that Chris brought along for show and tell: Behringer XENYX 802 eight-channel compact audio mixer Rolls Pro switchable microphone mute/talk switch Shure SM58-LC vocal microphone Pyle Pro PHA40 four-channel stereo headphone amplifier Zoom H4nSP four-channel handy recorder A lot of that is next-level stuff. If you're just looking for gear to get started, previous podcast meetup guest Justin Jackson recommends this setup: Microphone: Audio-Technica ATR2100-USB Pop filter: "Find one that will work with your mic. This one is a good start." Headphones: Sennheiser HD 202 II Editing software: Garage Band (for Mac) and Audacity (for PC) This week’s Seen and Heard in Edmonton is brought to you by Podcast Canvas, a tool to help businesses and organizations that want to start a podcast figure out who to reach, what to say, and how to make it happen. If you want to start a podcast, want to help your company start a podcast, or keep getting asked "How do I start a podcast?", visit podcastcanvas.com for a free planning tool and guide. Musical credits: Beethoven’s Sonata No. 1 in F Minor, Op. 2 No. 1, played by Daniel Veesey, from freemusicarchive.com.
Podsumowanie testów aplikacji do tworzenia podkastów na telefonach komórkowych Spreaker Studio.Szczegółowe podsumowanie na stronie http://podkasty.info/bl/134W tym odcinku użyłem mikrofonu Studio Production B1, miksera Behringer Xenyx 802 USB i do nagrania przez line-in Zoom H-2. Odcinek został wstępnie obrobiony w Auphonic. Zbędne elementy usunąłem w Adobe Audition 1.5.
Podsumowanie testów aplikacji do tworzenia podkastów na telefonach komórkowych Spreaker Studio. Szczegółowe podsumowanie na stronie http://podkasty.info/bl/134 W tym odcinku użyłem mikrofonu Studio Production B1, miksera Behringer Xenyx 802 USB i do nagrania przez line-in Zoom H-2. Odcinek został wstępnie obrobiony w Auphonic. Zbędne elementy usunąłem w Adobe Audition 1.5.
Lean Coffee recorded in Seattle, June 24, 2015 Vic (@AgileCoffee) attended the Scrum Alliance's fourth Scrum Coaching Retreat in the USA. It was three days of examination of what it means to be a coach in a scrum environment and how we can improve our coaching methods worldwide. In the first two days, participants had the opportunity to pitch a project they wished to focus on. Everyone then joined a project team and organized using scrum processes and roles. We had three sprints (spanning the two days) in which to iterate and increment on a delivery of our final products. The final day was devoted to an Open Space event and a closing retrospective. One of the projects created can be found at AgileLeadershipToolkit.com. I'll make others available once I receive explicit permission and links from their creators. Special kudos go out to Stewart Young (@Stuartliveart) of illustrationstation.co.uk for completing some amazing artwork throughout the three days. Vic hosted a lean coffee during Open space on the third day, and he was joined by: Dan Fuller of SolutionsIQ CeeDee Doyle of Assurity in New Zealand Kelley Harris(@mkelleyharris) of SourceCell Max Lamers (@maxlamers) Jeff Nielsen of RMC Learning Solutions Dave Cornelius (@DrCorneliusInfo) of 5saturdays Topics included: Overcoming team dysfunctions at the Scrum Coaching Retreat Alternative formats for a three-day retreat How to do podcasts (see below) PO coaching beyond the basics Impact Mapping Value proposition for coaching vs just training For more information on retreats Links to previous (and upcoming) Coaching Retreats in the USA: Boulder, CO - Dec 7-9, 2011 Chandler, AZ - Dec 4-6, 2013 - archive of projects Raleigh (Chapel Hill), NC - Oct 28-30, 2014 Seattle, WA - June 22-24, 2015 Irvine, CA - Spring 2016 Podcasting Tools and Techniques I produce my shows old school - by gathering participants in a room and recording with a bunch of mics. (I have a degree in audio engineering, so I'm a bit of an audiophile.) It's fun, and nothing beats the face-to-face communication with all its nuances and clarity. We meet about twice a month in a mostly quiet space, and it takes my about 10-15 minutes to set up the equipment and do a quick check of levels. For these bigger on location recording (from 4 to 6 attendees), I use a Behringer X1222 mixing board and Audio Technica ATR2100 or similar mics, plug it into my laptop and be good. [None of these links are affiliate links - just plain links to Amazon.] When it's only a few of us, I'll just bring my Zoom H5 handy recorder to blug mics in to - no need to lug my laptop around. In my home studio where it's only me, I either plug my mic into the laptop or go through a smaller Behringer Xenyx mixer. For post-production I use the free software Audacity (for PC). It does everything I need; I only do a minor amount of editing, and I like to tweak the levels somewhat. I export the file as MPEG Layer 3 (.mp3) format and load it into my local iTunes to enter the metadata (pretty much just cut-and-paste from a template). Then it's time to upload to my audio host. Libsyn costs about $12 / month, but you can get a cheaper plan with them (or free elsewhere) if you podcast less frequently (I post at least two Agile Coffee podcasts a month and sometimes other projects as well). Libsyn also provides download stats. When it's time to announce the new episode, the
Este episodio es algo especial, vamos a ir de compras, si, sabemos que un Podcast se puede hacer cogiendo tu teléfono móvil y grabando y subiéndolo a la red, sin más. Pero aquí vamos a extendernos en ese momento en el que el gusanillo te entra, ese momento en el que QUIERES MEJORAR, ese momento que quieres saber ¿dónde subo el podcast? sin importar si es de pago el servicio.En esta Sunnecracia, el podcast del metapodcasting, vamos a:* Recomendar software para tu Podcast* Recomendar hardware para tu "estudio de grabación"* Realizar una comparativa de precios de distintas plataformas de alojamiento de audios.Para empezar quiero hablar de lo más básico, el software de grabación:* GarageBand para MAC (grabador y editor de audio gratis) , graba y edita de manera sencilla por pistas o canales de audio. https://www.apple.com/es/mac/garageband/* Audacity (para MAC y PC), descárgalo gratis y empieza tu grabación/ edición de audio de inmediato. http://sourceforge.net/projects/audacity/Otras opciones, de pago:* Amadeus Pro, (MAC) http://www.hairersoft.com/pro.html* Adobe audition (MAC y Windows) https://creative.adobe.com/es/products/auditionQuiero grabar conversaciones de SKYPE, ¿qué necesito?Tienes opción Software o hardware. Software:* Audio Hijack Pro, su precio es de 49 dólares y hace virgerías, Configura que deseas grabar. Cómo no soy usuario de MAC y no he tenido el gusto de probarlo os dejo un post de una web.- http://www.rogueamoeba.com/audiohijack/-http://www.appsmac.com/2015/02/audio-hijack-3-la-captura-de-audio-perfecta/* Soundtap streaming Audio Recorder, graba los sonidos de tu ordenador, graba Skype, Youtube, incluso graba Spotify... El precio ronda los 20 euros http://www.nch.com.au/soundtap/index.html* Pamela for skype, es el software que usé durante años en Agüesome. Pruébalo 30 días gratis. http://www.pamela.biz/en/Existen muchos otros pero no los conozco en profundidad o no los he usado, se aceptan recomendaciones para incrementar información.Grabar llamadas de Skype con Hardware.Para grabar llamadas de Skype con tu programa de edición, ya sea GarageBand o Audacity, por ejemplo, necesitarás una mesa de mezclas y por supuesto, micrófonos. Voy a dejarte una pequeña lista y tu eliges el que más se adapte a tu economía o número de entradas de micrófonos.- Si deseas más información sobre este tema, te recomiendo LOS CURSOS DE PODCASTING DE JOSSGREEN LIVE-Para ver los enlaces dirígete a la web www.lasunnecracia.com si es que estás leyendo esto desde otro lugar.BEHRINGER Mesa de mezclas XENYX 302USB : esta mini mesa es RECOMENDADISIMA, no sólo por su tamaño si no porque es de las pocas que te permiten grabar Skype y todo lo que entre en tu computadora de una manera super sencilla, mediante cable USB y un solo botón, sin cables extras de audio por encima de la mesa. Recomendada incluso para hacer "de puente" con otras mesas y proceder a una grabación ULTRA cómoda.Otras mesas de mezclas:* Behringer Xenyx 802 - Mezclador para DJ (0,005%, 13W, 18,9 cm, 22 cm, 4,7 cm)* MESA MEZCLAS XENYX Q1202USBAlgunos micrófonos:* Behringer Ultravoice XM8500 - Micrófono dinámico cardioide, impedancia 150 ohms (sencillito)* Behringer XM1800S - Micrófono (Studio, -52 Db, 80 - 15000 Hz, Negro) (pack de micros sencillos)* Audio-Technica ATR2100-USB Cardioid Dynamic USB/XLR Microphone (RECOMENDADO 100% importación)Extras para tu estudio de Podcasting:*InLine 99323 - Adaptador para cable (6.3mm M, 2x RCA F, macho/hembra) Negro*S-Conn - Cable de audio adaptador (de 6,3 mm a 2 conexiones macho RCA, 1,5 m)*5 Piezas Esponja Cubierta Funda Protectora para Micrófono KTV Karaoke Mic*Radiostore - Adaptador (de conector RCA a conector Jack mono, 6,35 mm) 11 unidades* Brazo flexo para sujetar el micrófono al aire Mic micrófono estudio difusión suspensión Boom Scissor soporte el soporte del brazoUna vez hemos comprado cosas para poder realizar el producto, programa, Podcast. Vamos a realizar una comparativa de precios entre las plataformas de alojamiento de audios que conozco.* SpreakerSpreaker es una plataforma que te permite además de alojar audios, realizar una emisión en directo de manera sencilla a través de su página web, de las App móviles o de servicios externos de Streaming/ broadcasting. Tiene un modo gratuito en el que funcionan todas las opciones pero de manera escasa, una vez necesitas más, ya sea por falta de espacio o porque deseas emitir más tiempo de directo pasas a visitar la página de la Store. En la versión gratis, el hosting no es ilimitado, si dejas de usar su servicio, te borrarán audios previo aviso.Las tarifas se pagan por usuario y se aplican a todos los show que quieras crear: On Air Talent, Broadcaster, Anchorman y Station y varían sus precios desde 3.99 euros al mes hasta 99.99 euros mensuales, dándote más tiempo de directo y de almacenamiento, además de mejorar estadísticas por ejemplo.* iVooxIvoox es una plataforma Española que contiene un gran número de audios en sus servidores, una auténtica fonoteca o quiosko del audio, su modo gratuito te ofrece hosting gratuito ilimitado con algunas restricciones que puedes desbloquear haciéndote premium. Tenemos 3 tarifas y una serie de extras a elegir, al más puro estilo concesionario.Los premium de Ivoox son, la tarifa básica, la Silver y la Gold, la Silver y la Gold te otorgan mayor visibilidad dentro de la página, escalando mejor en el Ránking y apareciendo en la Ivoox Magazine. El pack de visibilidad básico es gratis, mientras que el Silver te sale por 9.99 al mes y el Gold 24.99 euros mensuales, hablamos de pago por Show, es decir, pagarías por el podcast que elijas dentro de tu cuenta.Si además, queremos mejorar (o dejar que dejen de empeorar) el audio de alguno de nuestros podcast, podremos adquirir la mejora de la calidad del audio por 2.49 euros al mes.Y por último , Ivoox te permite hacerte pro por 2.49 euros al mes puedes desactivar la opción de mostrar los 20 últimos elementos en tu feed y pasar a mostrar todos los audios en tu feed, este pago es por el usuario y se aplica a todos los podcast que tengas a la vez, de esta manera en los Feeds, podcatchers, iTunes, se verían todos tus capítulos (si le diste el feed de iVoox) y no solamente los últimos 20 episodios.Otras plataformas menos usadas en nuestro país son Libsyn, Feedpress, SoundCloud o Podcasts.Los precios de Libsyn podemos encontrarlos aquí http://www.libsyn.com/plans-pricing/y van desde 5 a 75 euros al mes, a partir de 20 dólares incluye creación de aplicación móvil.y Si amigos, Feedpress , que es una web de gestión de Feeds también están en fase Beta para alojar Podcasts. https://feed.press/blog/2015/03/03/introducing-podcast-hosting/Si teníamos pocas sorpresas os presento las nuevas tarifas de Podcasting de Soundcloud https://soundcloud.com/pro?ref=t202 , aunque originalmente SoundCloud es una potente herramienta para músicos, recientemente han sacado al público su modo podcaster que tuvieron durante años en fase beta, podemos leer la noticia en wwwhatsnew.Noticia: http://wwwhatsnew.com/2015/04/28/soundcloud-abre-su-servicio-de-podcasting-a-todos-los-usuarios/Y para finalizar quiero enseñaros un último descubrimiento, se trata de algo parecido a iVoox, dónde al Podcaster, al creador de contenido le ofrecen los servicios de manera gratuita, la página es http://www.podcasts.com/. Tiene una opción para leer tus Rss, otra para importar los audios desde tu Rss y un extra para poner tus contenidos solamente en modo premium para el oyente. Curioso cuanto menos.Espero que os haya servido de ayuda, cualquier cosa no dudéis en contactar.Suscríbete via http://feedpress.me/lasunnecraciaBúscalo en Itunes: https://itunes.apple.com/es/podcast/la-sunnecracia/id488826202Sígueme en Twitter @lasunnecracia/ @sunneEscríbeme a lasunnecracia@gmail.com SPREAKER:http://www.spreaker.com/show/la_sunnecracia_live_with Canal alternativo con audios cortos sobre podcasting: Sunndercover http://www.spreaker.com/show/1037093/episodes/feedLee revista Podcast:https://flipboard.com/section/revista-podcast-bj3YjQ?utm_campaign=widgets&utm_medium=web&utm_source=magazine_widget
Este episodio es algo especial, vamos a ir de compras, si, sabemos que un Podcast se puede hacer cogiendo tu teléfono móvil y grabando y subiéndolo a la red, sin más. Pero aquí vamos a extendernos en ese momento en el que el gusanillo te entra, ese momento en el que QUIERES MEJORAR, ese momento que quieres saber ¿dónde subo el podcast? sin importar si es de pago el servicio.En esta Sunnecracia, el podcast del metapodcasting, vamos a:* Recomendar software para tu Podcast* Recomendar hardware para tu "estudio de grabación"* Realizar una comparativa de precios de distintas plataformas de alojamiento de audios.Para empezar quiero hablar de lo más básico, el software de grabación:* GarageBand para MAC (grabador y editor de audio gratis) , graba y edita de manera sencilla por pistas o canales de audio. https://www.apple.com/es/mac/garageband/* Audacity (para MAC y PC), descárgalo gratis y empieza tu grabación/ edición de audio de inmediato. http://sourceforge.net/projects/audacity/Otras opciones, de pago:* Amadeus Pro, (MAC) http://www.hairersoft.com/pro.html* Adobe audition (MAC y Windows) https://creative.adobe.com/es/products/auditionQuiero grabar conversaciones de SKYPE, ¿qué necesito?Tienes opción Software o hardware. Software:* Audio Hijack Pro, su precio es de 49 dólares y hace virgerías, Configura que deseas grabar. Cómo no soy usuario de MAC y no he tenido el gusto de probarlo os dejo un post de una web.- http://www.rogueamoeba.com/audiohijack/-http://www.appsmac.com/2015/02/audio-hijack-3-la-captura-de-audio-perfecta/* Soundtap streaming Audio Recorder, graba los sonidos de tu ordenador, graba Skype, Youtube, incluso graba Spotify... El precio ronda los 20 euros http://www.nch.com.au/soundtap/index.html* Pamela for skype, es el software que usé durante años en Agüesome. Pruébalo 30 días gratis. http://www.pamela.biz/en/Existen muchos otros pero no los conozco en profundidad o no los he usado, se aceptan recomendaciones para incrementar información.Grabar llamadas de Skype con Hardware.Para grabar llamadas de Skype con tu programa de edición, ya sea GarageBand o Audacity, por ejemplo, necesitarás una mesa de mezclas y por supuesto, micrófonos. Voy a dejarte una pequeña lista y tu eliges el que más se adapte a tu economía o número de entradas de micrófonos.- Si deseas más información sobre este tema, te recomiendo LOS CURSOS DE PODCASTING DE JOSSGREEN LIVE-Para ver los enlaces dirígete a la web www.lasunnecracia.com si es que estás leyendo esto desde otro lugar.BEHRINGER Mesa de mezclas XENYX 302USB : esta mini mesa es RECOMENDADISIMA, no sólo por su tamaño si no porque es de las pocas que te permiten grabar Skype y todo lo que entre en tu computadora de una manera super sencilla, mediante cable USB y un solo botón, sin cables extras de audio por encima de la mesa. Recomendada incluso para hacer "de puente" con otras mesas y proceder a una grabación ULTRA cómoda.Otras mesas de mezclas:* Behringer Xenyx 802 - Mezclador para DJ (0,005%, 13W, 18,9 cm, 22 cm, 4,7 cm)* MESA MEZCLAS XENYX Q1202USBAlgunos micrófonos:* Behringer Ultravoice XM8500 - Micrófono dinámico cardioide, impedancia 150 ohms (sencillito)* Behringer XM1800S - Micrófono (Studio, -52 Db, 80 - 15000 Hz, Negro) (pack de micros sencillos)* Audio-Technica ATR2100-USB Cardioid Dynamic USB/XLR Microphone (RECOMENDADO 100% importación)Extras para tu estudio de Podcasting:*InLine 99323 - Adaptador para cable (6.3mm M, 2x RCA F, macho/hembra) Negro*S-Conn - Cable de audio adaptador (de 6,3 mm a 2 conexiones macho RCA, 1,5 m)*5 Piezas Esponja Cubierta Funda Protectora para Micrófono KTV Karaoke Mic*Radiostore - Adaptador (de conector RCA a conector Jack mono, 6,35 mm) 11 unidades* Brazo flexo para sujetar el micrófono al aire Mic micrófono estudio difusión suspensión Boom Scissor soporte el soporte del brazoUna vez hemos comprado cosas para poder realizar el producto, programa, Podcast. Vamos a realizar una comparativa de precios entre las plataformas de alojamiento de audios que conozco.* SpreakerSpreaker es una plataforma que te permite además de alojar audios, realizar una emisión en directo de manera sencilla a través de su página web, de las App móviles o de servicios externos de Streaming/ broadcasting. Tiene un modo gratuito en el que funcionan todas las opciones pero de manera escasa, una vez necesitas más, ya sea por falta de espacio o porque deseas emitir más tiempo de directo pasas a visitar la página de la Store. En la versión gratis, el hosting no es ilimitado, si dejas de usar su servicio, te borrarán audios previo aviso.Las tarifas se pagan por usuario y se aplican a todos los show que quieras crear: On Air Talent, Broadcaster, Anchorman y Station y varían sus precios desde 3.99 euros al mes hasta 99.99 euros mensuales, dándote más tiempo de directo y de almacenamiento, además de mejorar estadísticas por ejemplo.* iVooxIvoox es una plataforma Española que contiene un gran número de audios en sus servidores, una auténtica fonoteca o quiosko del audio, su modo gratuito te ofrece hosting gratuito ilimitado con algunas restricciones que puedes desbloquear haciéndote premium. Tenemos 3 tarifas y una serie de extras a elegir, al más puro estilo concesionario.Los premium de Ivoox son, la tarifa básica, la Silver y la Gold, la Silver y la Gold te otorgan mayor visibilidad dentro de la página, escalando mejor en el Ránking y apareciendo en la Ivoox Magazine. El pack de visibilidad básico es gratis, mientras que el Silver te sale por 9.99 al mes y el Gold 24.99 euros mensuales, hablamos de pago por Show, es decir, pagarías por el podcast que elijas dentro de tu cuenta.Si además, queremos mejorar (o dejar que dejen de empeorar) el audio de alguno de nuestros podcast, podremos adquirir la mejora de la calidad del audio por 2.49 euros al mes.Y por último , Ivoox te permite hacerte pro por 2.49 euros al mes puedes desactivar la opción de mostrar los 20 últimos elementos en tu feed y pasar a mostrar todos los audios en tu feed, este pago es por el usuario y se aplica a todos los podcast que tengas a la vez, de esta manera en los Feeds, podcatchers, iTunes, se verían todos tus capítulos (si le diste el feed de iVoox) y no solamente los últimos 20 episodios.Otras plataformas menos usadas en nuestro país son Libsyn, Feedpress, SoundCloud o Podcasts.Los precios de Libsyn podemos encontrarlos aquí http://www.libsyn.com/plans-pricing/y van desde 5 a 75 euros al mes, a partir de 20 dólares incluye creación de aplicación móvil.y Si amigos, Feedpress , que es una web de gestión de Feeds también están en fase Beta para alojar Podcasts. https://feed.press/blog/2015/03/03/introducing-podcast-hosting/Si teníamos pocas sorpresas os presento las nuevas tarifas de Podcasting de Soundcloud https://soundcloud.com/pro?ref=t202 , aunque originalmente SoundCloud es una potente herramienta para músicos, recientemente han sacado al público su modo podcaster que tuvieron durante años en fase beta, podemos leer la noticia en wwwhatsnew.Noticia: http://wwwhatsnew.com/2015/04/28/soundcloud-abre-su-servicio-de-podcasting-a-todos-los-usuarios/Y para finalizar quiero enseñaros un último descubrimiento, se trata de algo parecido a iVoox, dónde al Podcaster, al creador de contenido le ofrecen los servicios de manera gratuita, la página es http://www.podcasts.com/. Tiene una opción para leer tus Rss, otra para importar los audios desde tu Rss y un extra para poner tus contenidos solamente en modo premium para el oyente. Curioso cuanto menos.Espero que os haya servido de ayuda, cualquier cosa no dudéis en contactar.Suscríbete via http://feedpress.me/lasunnecraciaBúscalo en Itunes: https://itunes.apple.com/es/podcast/la-sunnecracia/id488826202Sígueme en Twitter @lasunnecracia/ @sunneEscríbeme a lasunnecracia@gmail.com SPREAKER:http://www.spreaker.com/show/la_sunnecracia_live_with Canal alternativo con audios cortos sobre podcasting: Sunndercover http://www.spreaker.com/show/1037093/episodes/feedLee revista Podcast:https://flipboard.com/section/revista-podcast-bj3YjQ?utm_campaign=widgets&utm_medium=web&utm_source=magazine_widget
Este episodio es algo especial, vamos a ir de compras, si, sabemos que un Podcast se puede hacer cogiendo tu teléfono móvil y grabando y subiéndolo a la red, sin más. Pero aquí vamos a extendernos en ese momento en el que el gusanillo te entra, ese momento en el que QUIERES MEJORAR, ese momento que quieres saber ¿dónde subo el podcast? sin importar si es de pago el servicio.En esta Sunnecracia, el podcast del metapodcasting, vamos a:* Recomendar software para tu Podcast* Recomendar hardware para tu "estudio de grabación"* Realizar una comparativa de precios de distintas plataformas de alojamiento de audios.Para empezar quiero hablar de lo más básico, el software de grabación:* GarageBand para MAC (grabador y editor de audio gratis) , graba y edita de manera sencilla por pistas o canales de audio. https://www.apple.com/es/mac/garageband/* Audacity (para MAC y PC), descárgalo gratis y empieza tu grabación/ edición de audio de inmediato. http://sourceforge.net/projects/audacity/Otras opciones, de pago:* Amadeus Pro, (MAC) http://www.hairersoft.com/pro.html* Adobe audition (MAC y Windows) https://creative.adobe.com/es/products/auditionQuiero grabar conversaciones de SKYPE, ¿qué necesito?Tienes opción Software o hardware. Software:* Audio Hijack Pro, su precio es de 49 dólares y hace virgerías, Configura que deseas grabar. Cómo no soy usuario de MAC y no he tenido el gusto de probarlo os dejo un post de una web.- http://www.rogueamoeba.com/audiohijack/-http://www.appsmac.com/2015/02/audio-hijack-3-la-captura-de-audio-perfecta/* Soundtap streaming Audio Recorder, graba los sonidos de tu ordenador, graba Skype, Youtube, incluso graba Spotify... El precio ronda los 20 euros http://www.nch.com.au/soundtap/index.html* Pamela for skype, es el software que usé durante años en Agüesome. Pruébalo 30 días gratis. http://www.pamela.biz/en/Existen muchos otros pero no los conozco en profundidad o no los he usado, se aceptan recomendaciones para incrementar información.Grabar llamadas de Skype con Hardware.Para grabar llamadas de Skype con tu programa de edición, ya sea GarageBand o Audacity, por ejemplo, necesitarás una mesa de mezclas y por supuesto, micrófonos. Voy a dejarte una pequeña lista y tu eliges el que más se adapte a tu economía o número de entradas de micrófonos.- Si deseas más información sobre este tema, te recomiendo LOS CURSOS DE PODCASTING DE JOSSGREEN LIVE-Para ver los enlaces dirígete a la web www.lasunnecracia.com si es que estás leyendo esto desde otro lugar.BEHRINGER Mesa de mezclas XENYX 302USB : esta mini mesa es RECOMENDADISIMA, no sólo por su tamaño si no porque es de las pocas que te permiten grabar Skype y todo lo que entre en tu computadora de una manera super sencilla, mediante cable USB y un solo botón, sin cables extras de audio por encima de la mesa. Recomendada incluso para hacer "de puente" con otras mesas y proceder a una grabación ULTRA cómoda.Otras mesas de mezclas:* Behringer Xenyx 802 - Mezclador para DJ (0,005%, 13W, 18,9 cm, 22 cm, 4,7 cm)* MESA MEZCLAS XENYX Q1202USBAlgunos micrófonos:* Behringer Ultravoice XM8500 - Micrófono dinámico cardioide, impedancia 150 ohms (sencillito)* Behringer XM1800S - Micrófono (Studio, -52 Db, 80 - 15000 Hz, Negro) (pack de micros sencillos)* Audio-Technica ATR2100-USB Cardioid Dynamic USB/XLR Microphone (RECOMENDADO 100% importación)Extras para tu estudio de Podcasting:*InLine 99323 - Adaptador para cable (6.3mm M, 2x RCA F, macho/hembra) Negro*S-Conn - Cable de audio adaptador (de 6,3 mm a 2 conexiones macho RCA, 1,5 m)*5 Piezas Esponja Cubierta Funda Protectora para Micrófono KTV Karaoke Mic*Radiostore - Adaptador (de conector RCA a conector Jack mono, 6,35 mm) 11 unidades* Brazo flexo para sujetar el micrófono al aire Mic micrófono estudio difusión suspensión Boom Scissor soporte el soporte del brazoUna vez hemos comprado cosas para poder realizar el producto, programa, Podcast. Vamos a realizar una comparativa de precios entre las plataformas de alojamiento de audios que conozco.* SpreakerSpreaker es una plataforma que te permite además de alojar audios, realizar una emisión en directo de manera sencilla a través de su página web, de las App móviles o de servicios externos de Streaming/ broadcasting. Tiene un modo gratuito en el que funcionan todas las opciones pero de manera escasa, una vez necesitas más, ya sea por falta de espacio o porque deseas emitir más tiempo de directo pasas a visitar la página de la Store. En la versión gratis, el hosting no es ilimitado, si dejas de usar su servicio, te borrarán audios previo aviso.Las tarifas se pagan por usuario y se aplican a todos los show que quieras crear: On Air Talent, Broadcaster, Anchorman y Station y varían sus precios desde 3.99 euros al mes hasta 99.99 euros mensuales, dándote más tiempo de directo y de almacenamiento, además de mejorar estadísticas por ejemplo.* iVooxIvoox es una plataforma Española que contiene un gran número de audios en sus servidores, una auténtica fonoteca o quiosko del audio, su modo gratuito te ofrece hosting gratuito ilimitado con algunas restricciones que puedes desbloquear haciéndote premium. Tenemos 3 tarifas y una serie de extras a elegir, al más puro estilo concesionario.Los premium de Ivoox son, la tarifa básica, la Silver y la Gold, la Silver y la Gold te otorgan mayor visibilidad dentro de la página, escalando mejor en el Ránking y apareciendo en la Ivoox Magazine. El pack de visibilidad básico es gratis, mientras que el Silver te sale por 9.99 al mes y el Gold 24.99 euros mensuales, hablamos de pago por Show, es decir, pagarías por el podcast que elijas dentro de tu cuenta.Si además, queremos mejorar (o dejar que dejen de empeorar) el audio de alguno de nuestros podcast, podremos adquirir la mejora de la calidad del audio por 2.49 euros al mes.Y por último , Ivoox te permite hacerte pro por 2.49 euros al mes puedes desactivar la opción de mostrar los 20 últimos elementos en tu feed y pasar a mostrar todos los audios en tu feed, este pago es por el usuario y se aplica a todos los podcast que tengas a la vez, de esta manera en los Feeds, podcatchers, iTunes, se verían todos tus capítulos (si le diste el feed de iVoox) y no solamente los últimos 20 episodios.Otras plataformas menos usadas en nuestro país son Libsyn, Feedpress, SoundCloud o Podcasts.Los precios de Libsyn podemos encontrarlos aquí http://www.libsyn.com/plans-pricing/y van desde 5 a 75 euros al mes, a partir de 20 dólares incluye creación de aplicación móvil.y Si amigos, Feedpress , que es una web de gestión de Feeds también están en fase Beta para alojar Podcasts. https://feed.press/blog/2015/03/03/introducing-podcast-hosting/Si teníamos pocas sorpresas os presento las nuevas tarifas de Podcasting de Soundcloud https://soundcloud.com/pro?ref=t202 , aunque originalmente SoundCloud es una potente herramienta para músicos, recientemente han sacado al público su modo podcaster que tuvieron durante años en fase beta, podemos leer la noticia en wwwhatsnew.Noticia: http://wwwhatsnew.com/2015/04/28/soundcloud-abre-su-servicio-de-podcasting-a-todos-los-usuarios/Y para finalizar quiero enseñaros un último descubrimiento, se trata de algo parecido a iVoox, dónde al Podcaster, al creador de contenido le ofrecen los servicios de manera gratuita, la página es http://www.podcasts.com/. Tiene una opción para leer tus Rss, otra para importar los audios desde tu Rss y un extra para poner tus contenidos solamente en modo premium para el oyente. Curioso cuanto menos.Espero que os haya servido de ayuda, cualquier cosa no dudéis en contactar.Suscríbete via http://feedpress.me/lasunnecraciaBúscalo en Itunes: https://itunes.apple.com/es/podcast/la-sunnecracia/id488826202Sígueme en Twitter @lasunnecracia/ @sunneEscríbeme a lasunnecracia@gmail.com SPREAKER:http://www.spreaker.com/show/la_sunnecracia_live_with Canal alternativo con audios cortos sobre podcasting: Sunndercover http://www.spreaker.com/show/1037093/episodes/feedLee revista Podcast:https://flipboard.com/section/revista-podcast-bj3YjQ?utm_campaign=widgets&utm_medium=web&utm_source=magazine_widget
Of the many benefits of having a great podcast media host, having the ability to seamlessly replace a file is a nice option. With both Libsyn and Blubrry (use code: PodcastHelper for a free month at both), you have the ability to insert a new file in place of an already published one. This allows you […]
Recientemente ivoox.com ha incorporado nuevas opciones y vamos a debatir sobre podcasting en torno a ellas, una pestaña en Facebook llamada Podcast y un botón en nuestra página de iVoox de Paypal. En el directo realizado en La Sunnecracia del día 7/2/15 hemos podido debatir sobre estas cuestiones y otras cómo la monetización, fidelización y toma de decisiones importantes que se nos presentará este 2015 para nuestros podcast.http://www.ivoox.com/blog/En una primera parte contamos con invitados, cómo son Jorge @eove de Porque Podcast y a sr Solid de Hoth Factory.http://porquepodcast.com/http://hothfactory.com/Y en una segunda parte Juan Ignacio "iVoox" nos honra con su presencia para aclarar dudas, dar noticias sobre el futuro de iVoox y el podcasting en España y responder a cualquier duda realizada por los oyentes que había en Spreaker en el chat.Lectura de mensajes realizadosComentario en iVoox:Diego López SánchezHola! Un Podcast interesantisimo. Escucho los podcast de todos y cada vez soy más adicto a ellos.De hecho he convencido a dos compañeros, un licenciado en derecho y un sociólogo, de empezar nuestro propio podcast sobre el mundo de la empresa pero desde un punto de vista más legal, sociologico y de productividad personal.Uno de los temas que trataremos sin duda es el de los "mitos" sobre obtener ingresos de diversas fuentes pero por si puedo ayudar unas brevisimas notas.- No puedes pagar dos veces autónomos. Pagas el mínimo o más dependiendo de las prestaciones (seguro de baja, paro y pensiones que quieras tener).- Si trabajas por cuenta ajena y eres autónomo es una putada ya que tienes que hacer la declaración de la renta sí o sí. Es perjudicial para personas que cobren menos de 18.000€ al año - Si eres ya autónomo con la seguridad social no tienes ningún problema. El problema lo tienes con hacienda ya que tienes que elegir más epígrafes del IAE y desglosar cada trimestre los beneficios por cada epígrafe. Esto si estas por módulos puede ser letal.Bueno no me enrollo más, mi enhorabuena por vuestro trabajo y espero que sigamos en contacto.Un saludo. Email:Andy RamosBuenos días,No existe jurisprudencia al respecto y la cuestión ha sido discutida en más de una ocasión dentro del seno de la organización Creative Commons (más información: https://wiki.creativecommons.org/Frequently_Asked_Questions#Does_my_use_violate_the_NonCommercial_clause_of_the_licenses.3F, https://wiki.creativecommons.org/NonCommercial_interpretation y https://wiki.creativecommons.org/Defining_NoncommercialDesde mi punto de vista, y como verás en esa documentación, se puede entender que hay un uso comercial cuando se obtiene una ventaja comercial o una compensación económica de cualquier tipo, ya sea para cubrir costes o, incluso, tener beneficios.En cualquier caso, como digo, es una cuestión controvertida y al final tendrás que seguir tu criterio.Un saludo y suerte con el podcast Suscríbete via http://feedpress.me/lasunnecraciaBúscalo en Itunes: https://itunes.apple.com/es/podcast/la-sunnecracia/id488826202Sígueme en Twitter @lasunnecracia/ @sunneEscríbeme a lasunnecracia@gmail.com SPREAKER:http://www.spreaker.com/show/la_sunnecracia_live_with Canal alternativo con audios cortos sobre podcasting: Sunndercover http://www.spreaker.com/show/1037093/episodes/feedLee revista Podcast:https://flipboard.com/section/revista-podcast-bj3YjQ?utm_campaign=widgets&utm_medium=web&utm_source=magazine_widgetLa Sunnecracia subasta al precio más bajo Behringer XENYX 302 USBhttp://www.lasunnecracia.com/2015/02/la-sunnecracia-subasta-al-precio-mas.html
Recientemente ivoox.com ha incorporado nuevas opciones y vamos a debatir sobre podcasting en torno a ellas, una pestaña en Facebook llamada Podcast y un botón en nuestra página de iVoox de Paypal. En el directo realizado en La Sunnecracia del día 7/2/15 hemos podido debatir sobre estas cuestiones y otras cómo la monetización, fidelización y toma de decisiones importantes que se nos presentará este 2015 para nuestros podcast.http://www.ivoox.com/blog/En una primera parte contamos con invitados, cómo son Jorge @eove de Porque Podcast y a sr Solid de Hoth Factory.http://porquepodcast.com/http://hothfactory.com/Y en una segunda parte Juan Ignacio "iVoox" nos honra con su presencia para aclarar dudas, dar noticias sobre el futuro de iVoox y el podcasting en España y responder a cualquier duda realizada por los oyentes que había en Spreaker en el chat.Lectura de mensajes realizadosComentario en iVoox:Diego López SánchezHola! Un Podcast interesantisimo. Escucho los podcast de todos y cada vez soy más adicto a ellos.De hecho he convencido a dos compañeros, un licenciado en derecho y un sociólogo, de empezar nuestro propio podcast sobre el mundo de la empresa pero desde un punto de vista más legal, sociologico y de productividad personal.Uno de los temas que trataremos sin duda es el de los "mitos" sobre obtener ingresos de diversas fuentes pero por si puedo ayudar unas brevisimas notas.- No puedes pagar dos veces autónomos. Pagas el mínimo o más dependiendo de las prestaciones (seguro de baja, paro y pensiones que quieras tener).- Si trabajas por cuenta ajena y eres autónomo es una putada ya que tienes que hacer la declaración de la renta sí o sí. Es perjudicial para personas que cobren menos de 18.000€ al año - Si eres ya autónomo con la seguridad social no tienes ningún problema. El problema lo tienes con hacienda ya que tienes que elegir más epígrafes del IAE y desglosar cada trimestre los beneficios por cada epígrafe. Esto si estas por módulos puede ser letal.Bueno no me enrollo más, mi enhorabuena por vuestro trabajo y espero que sigamos en contacto.Un saludo. Email:Andy RamosBuenos días,No existe jurisprudencia al respecto y la cuestión ha sido discutida en más de una ocasión dentro del seno de la organización Creative Commons (más información: https://wiki.creativecommons.org/Frequently_Asked_Questions#Does_my_use_violate_the_NonCommercial_clause_of_the_licenses.3F, https://wiki.creativecommons.org/NonCommercial_interpretation y https://wiki.creativecommons.org/Defining_NoncommercialDesde mi punto de vista, y como verás en esa documentación, se puede entender que hay un uso comercial cuando se obtiene una ventaja comercial o una compensación económica de cualquier tipo, ya sea para cubrir costes o, incluso, tener beneficios.En cualquier caso, como digo, es una cuestión controvertida y al final tendrás que seguir tu criterio.Un saludo y suerte con el podcast Suscríbete via http://feedpress.me/lasunnecraciaBúscalo en Itunes: https://itunes.apple.com/es/podcast/la-sunnecracia/id488826202Sígueme en Twitter @lasunnecracia/ @sunneEscríbeme a lasunnecracia@gmail.com SPREAKER:http://www.spreaker.com/show/la_sunnecracia_live_with Canal alternativo con audios cortos sobre podcasting: Sunndercover http://www.spreaker.com/show/1037093/episodes/feedLee revista Podcast:https://flipboard.com/section/revista-podcast-bj3YjQ?utm_campaign=widgets&utm_medium=web&utm_source=magazine_widgetLa Sunnecracia subasta al precio más bajo Behringer XENYX 302 USBhttp://www.lasunnecracia.com/2015/02/la-sunnecracia-subasta-al-precio-mas.html
Recientemente ivoox.com ha incorporado nuevas opciones y vamos a debatir sobre podcasting en torno a ellas, una pestaña en Facebook llamada Podcast y un botón en nuestra página de iVoox de Paypal. En el directo realizado en La Sunnecracia del día 7/2/15 hemos podido debatir sobre estas cuestiones y otras cómo la monetización, fidelización y toma de decisiones importantes que se nos presentará este 2015 para nuestros podcast.http://www.ivoox.com/blog/En una primera parte contamos con invitados, cómo son Jorge @eove de Porque Podcast y a sr Solid de Hoth Factory.http://porquepodcast.com/http://hothfactory.com/Y en una segunda parte Juan Ignacio "iVoox" nos honra con su presencia para aclarar dudas, dar noticias sobre el futuro de iVoox y el podcasting en España y responder a cualquier duda realizada por los oyentes que había en Spreaker en el chat.Lectura de mensajes realizadosComentario en iVoox:Diego López SánchezHola! Un Podcast interesantisimo. Escucho los podcast de todos y cada vez soy más adicto a ellos.De hecho he convencido a dos compañeros, un licenciado en derecho y un sociólogo, de empezar nuestro propio podcast sobre el mundo de la empresa pero desde un punto de vista más legal, sociologico y de productividad personal.Uno de los temas que trataremos sin duda es el de los "mitos" sobre obtener ingresos de diversas fuentes pero por si puedo ayudar unas brevisimas notas.- No puedes pagar dos veces autónomos. Pagas el mínimo o más dependiendo de las prestaciones (seguro de baja, paro y pensiones que quieras tener).- Si trabajas por cuenta ajena y eres autónomo es una putada ya que tienes que hacer la declaración de la renta sí o sí. Es perjudicial para personas que cobren menos de 18.000€ al año - Si eres ya autónomo con la seguridad social no tienes ningún problema. El problema lo tienes con hacienda ya que tienes que elegir más epígrafes del IAE y desglosar cada trimestre los beneficios por cada epígrafe. Esto si estas por módulos puede ser letal.Bueno no me enrollo más, mi enhorabuena por vuestro trabajo y espero que sigamos en contacto.Un saludo. Email:Andy RamosBuenos días,No existe jurisprudencia al respecto y la cuestión ha sido discutida en más de una ocasión dentro del seno de la organización Creative Commons (más información: https://wiki.creativecommons.org/Frequently_Asked_Questions#Does_my_use_violate_the_NonCommercial_clause_of_the_licenses.3F, https://wiki.creativecommons.org/NonCommercial_interpretation y https://wiki.creativecommons.org/Defining_NoncommercialDesde mi punto de vista, y como verás en esa documentación, se puede entender que hay un uso comercial cuando se obtiene una ventaja comercial o una compensación económica de cualquier tipo, ya sea para cubrir costes o, incluso, tener beneficios.En cualquier caso, como digo, es una cuestión controvertida y al final tendrás que seguir tu criterio.Un saludo y suerte con el podcast Suscríbete via http://feedpress.me/lasunnecraciaBúscalo en Itunes: https://itunes.apple.com/es/podcast/la-sunnecracia/id488826202Sígueme en Twitter @lasunnecracia/ @sunneEscríbeme a lasunnecracia@gmail.com SPREAKER:http://www.spreaker.com/show/la_sunnecracia_live_with Canal alternativo con audios cortos sobre podcasting: Sunndercover http://www.spreaker.com/show/1037093/episodes/feedLee revista Podcast:https://flipboard.com/section/revista-podcast-bj3YjQ?utm_campaign=widgets&utm_medium=web&utm_source=magazine_widgetLa Sunnecracia subasta al precio más bajo Behringer XENYX 302 USBhttp://www.lasunnecracia.com/2015/02/la-sunnecracia-subasta-al-precio-mas.html
Tässä podcast jaksossa käsittelemme hieman välineistöä mitä suunnittelen hankkimaan podcastiani varten. Kommentoi vapaasti! Aiempi artikkeli blogissa (https://markokaartinen.net/podcast-valineistoa/) Behringer Xenyx 802 (http://www.thomann.de/fi/behringer_xenyx_802.htm) Audio-Technica AT2020 Popkiller Set (http://www.thomann.de/fi/audio_technicaat2020_popkiller_set.htm) Behringer HA400 (http://www.thomann.de/fi/behringer_ha400.htm) Behringer U-Control UCA202 (http://www.thomann.de/fi/behringer_ucontrol_uca_202.htm) Zoom H-4N + APH-4n Bundle (http://www.thomann.de/fi/zoom_h_4naph_4n_bundle.htm) Miten teen podcastia (https://markokaartinen.net/miten-teen-podcastia/) Bossjock (iPad & Kotisivut) Lataa podcastin AIFF -tiedosto tästä (201mb). 016 Podcast välineistön pohdiskelua julkaistiin ensin Marko Kaartinen sivulla.