Podcasts about sanding

Dean advices about painting a home and stucco + the type of paint to use. The important part of painting is the preparation. Dean talks about re-staining a mahogany front door and how to treat mahogany doors right. Dean continues to talk about stains and original coating of mahogany doors. Plus, Dean talks about sanding projects and sanding tricks. 

SHOW NOTES: Today's show has tips for crafting your perfect outdoor living space, asking key questions before hiring a contractor, and choosing the best tile for your next project. Whether your DIY project is indoors or outdoors, we've got the answers you need for all your home improvement questions! - Outdoor Living: Follow these 5 tips for creating the perfect outdoor living space. - Hiring Contractors: Choose wisely by asking these 5 key questions before hiring a home improvement professional. - Centurion Garden & Outdoor Living Product Feature – 3-in-1 Wild Bird Feeder   Q & A: - HVAC Water: Gail's boiler provides both the heat and the hot water. She needs to find out how to set the mixing valve so the shower water won't be too hot. - Bathroom Vent: Mike wonders about connecting his bathroom fan vent to the plumbing vent. He can't do that, but we've got tips on how to run the exhaust vent to the outside. - Plumbing: A cracked waste pipe flooded the basement. Helen should file an insurance claim and hire a remediation company to clean up the sewage damage. - Foundation Cracks: Pat has multiple big cracks in his foundation walls. He'll need a structural engineer to address the problem and design the proper repairs. - Odors: Mason can't find the source of odors in his home. We have a few ideas and give him tips on steam-cleaning the carpets and priming and painting the walls to seal them. - Textured Wall Prep: Dave wants to tile over a textured bathroom wall. Sanding the surface will give him better adhesion to glue the tile right over it. - Kitchen Cabinet Lazy Susan: The top shelf of an old kitchen cabinet carousel has dropped. Marge gets advice on how to find parts and try to repair it.   ASK A QUESTION: Need help with your own home improvement or décor question? We'd love to help! Call the show 24/7 at 888-MONEY-PIT (888-666-3974) or post your question here: https://www.moneypit.com/ask. Learn more about your ad choices. Visit podcastchoices.com/adchoices

Dean talks about ember-free crawl space vents and the importance of this type of fire hardening investment. Dean advised a caller about repurposing a piano with glued panels and how to dissolve glue. Dean discusses sanding down walls with bad texture and painting over the old coat.  Plus, placing tile in an outdoor exterior patio..

In Part 2 of this episode with T.J. Haas of Mad Science Flooring (www.madscienceflooring.com) in Syracuse, N.Y., T.J. and host Stephen Diggins discuss the right ways to use multi-disc and planetary sanding machines to get a floor flat while removing the scratches, how to choose your abrasives wisely in today's wood flooring market, how T.J. has made a living out of doing things that nobody else wants to do, and how he charges a premium for his work and also finds new revenue streams for his business every year. They also talk about cool old wood floor sanding machines and funny machine maintenance mistakes.  To read T.J.'s article “My Trigger Phrase: ‘Been Doing It That Way for 35 Years'” about his dad and why he cares so much about electrical safety, click here: https://bit.ly/jj23llearn Read T.J.'s article “Do You Need a Power Station? Yes, and Here's Why” from the February/March 2025 issue of WFB here: https://bit.ly/fm25ftf To read T.J.'s ghost story about working at a bowling alley, click here: https://bit.ly/on24talkback

In this 'best of' episode of the Repcolite Home Improvement Show, Dan and Hailey discuss coping with the winter blues through project planning. Dan shares his personal strategy of tackling outdoor projects to stay positive when caught in cold weather. The episode includes a detailed conversation about a significant home project where Allie Bryde from Mustard Seed Beginnings sanded, stained, and refinished hardwood floors, including overcoming challenges in marrying new and old flooring. Additionally, the show covers practical tips for painting vinyl flooring as a short-term solution and emphasizes the importance of setting proper expectations for such projects.CHAPTERS00:00 Introduction and New Year Greetings00:17 Battling the Winter Blues02:05 The Power of Planning08:51 Wood Floor Refinishing Project09:17 Meet Allie from Mustard Seed Beginnings14:33 Challenges of Sanding and Refinishing19:56 Choosing the Perfect Stain Color20:31 Sampling and Testing the Stain21:45 The Staining Process22:59 Dealing with Staining Issues24:19 Applying the Finish28:22 Living Through the Renovation30:10 Final Thoughts and Future Projects32:55 Painting Vinyl Floors: A Temporary Fix

We sit down with Sebastien of 3D products at the Detail Summit Netherlands and talk about the advanced technique of dry sanding followed by polishing.

Mill glaze has long been a debated topic in the wood care industry. In this episode of the Stain & Seal Experts Podcast, we explore what mill glaze is, whether it actually exists, and how it impacts stain and sealer performance. Drawing on research from the U.S. Forest Products Laboratory and practical industry insights, we'll guide you through the best practices for overcoming challenges attributed to mill glaze. Learn how to prepare wood surfaces, ensure optimal stain penetration, and deliver professional-grade results every time.Research HighlightsU.S. Forest Products Laboratory:Their studies suggest that mill glaze is less about heat-sealed resins and more about surface texture and preparation. Simply put, sanding and proper cleaning are more critical than combating a mythical glaze. (Source)Keywords:Mill glaze, wood finishing, wood staining, surface preparation, stain adhesion, U.S. Forest Products Laboratory, oil-based stains, professional wood care, wood restoration, sanding, cleaning woodHashtags:#MillGlaze #WoodCare #StainAndSealExperts #ProfessionalWoodCare #SurfacePreparation #WoodStaining #WoodFinishing #WoodRestoration #StainAndSealExperts #WoodCareProfessionals #FenceStaining #DeckCare #ContractorSuccess #StainingPodcast #BusinessGrowth #WoodRestoration

In this episode of the Pints of Polishing podcast, hosts Marshall Hill and Nick delve into the intricacies of sanding and paint correction in the automotive detailing industry. They discuss the importance of technique, the challenges faced by beginners, and the respect required for the craft. The conversation also touches on the future of paint correction businesses, the common mistakes made with wheels and tires, and the ongoing debate about solvent tire shine products. Insights from their experiences highlight the need for proper training and understanding in the detailing profession, especially as the industry evolves with new technologies and products. In this conversation, Nick and Marshall discuss the realities of gambling in casinos, the changing dynamics of the SEMA show, and the evolving attitudes of attendees. They explore the concept of 'the grind' in business, emphasizing the importance of perspective and personal choice in one's career. The discussion also touches on the pressures of social media and the implications of sharing personal successes online. Takeaways Sanding requires skill and respect for the craft. Beginners often underestimate the complexity of sanding. Production sanding can be high-pressure and challenging. Understanding compounds is crucial for effective correction. Sanding can be applied to various surfaces, including interiors. Mistakes in detailing are common and should be addressed honestly. The future of paint correction may require a broader skill set. Solvent tire shine products can potentially cause damage. SEMA showcases the latest trends and technologies in detailing. Training and experience are essential for mastering detailing techniques. Casinos are designed for profit, not for winners. Attendees at SEMA are shifting from networking to vacationing. There's a noticeable change in the attitude of industry professionals. Many are choosing to focus on personal enjoyment rather than industry involvement. The grind in business is often misunderstood; it's about commitment, not suffering. Social media can create pressure to share successes, leading to scrutiny. It's important to share experiences authentically, not for validation. Business owners should focus on their work rather than the grind mentality. The relationship with social media should be healthy and intentional. Personal growth often comes from reassessing one's motivations. Chapters 00:00 Introduction to Sanding and Correction 03:01 The Art and Technique of Sanding 05:46 Production Sanding and Its Challenges 09:02 Understanding Compounds and Their Role 11:45 Sanding on Interior Surfaces 15:05 The Future of Paint Correction Businesses 18:02 Wheels, Tires, and Common Mistakes 20:59 The Debate on Solvent Tire Shine 24:02 SEMA Week Insights 24:56 SEMA: A Shift in Attitude 27:46 The Changing Dynamics of SEMA Attendance 30:11 The Purpose of SEMA: Networking vs. Vacation 34:02 Understanding the Grind in Business 40:14 Social Media and the Pressure to Share Success

I'm so glad James reached out to me.  He's one of those people who you just connect with right away.  He's extremely intelligent, well spoken, and has a dynamic skill set that has enabled him to take an idea and develop a product in his garage that just might revolutionize the way sanding is done in the drywall industry.  He's very funny and we get into the weeds on the industry, marketing, and how it came to be that he is now a product developer.  I'm pretty sure you're going to like this episode, the 115th episode, of The Drywall Podcast.   This episode, and all the episodes of The Drywall Podcast in the month of November are brought to you by CSR Building Supply.  You can find out more about CSR by visiting their website at www.csrbuilding.com 

In this episode of the Pints and Polishing Podcast, Marshall and Brian discuss various aspects of boat detailing, including winterization, maintenance, and the challenges faced by detailers. They explore the importance of educating customers about proper boat care, the realities of ceramic coatings, and the misconceptions surrounding sanding. The conversation also touches on the business side of detailing, emphasizing the profitability of washing cars and the value of training and education in the industry. Takeaways Winterization is often neglected by boat owners. Most boat owners do not take care of their boats after the season. Ceramic coatings are beneficial for winter storage. Detailing boats requires different techniques than cars. Education is key for customers to understand boat maintenance. Sanding boats is labor-intensive and not always profitable. Newer boats are easier to detail and more profitable. Washing cars can be a lucrative business. Training and education can help detailers improve their skills. Building relationships with boat dealerships can lead to more work. Chapters 00:00 Introduction and Beer Talk 02:52 Winterization and Boat Maintenance 06:05 Detailing Boats: Challenges and Techniques 11:54 The Business of Boat Detailing 18:10 Sanding and Its Misconceptions 24:02 Ceramic Coatings and Their Realities 30:07 Training and Education in Boat Detailing

Seems a little shady.See Privacy Policy at https://art19.com/privacy and California Privacy Notice at https://art19.com/privacy#do-not-sell-my-info.

When you sand a piece of wood, you are taught to ‘sand with the grain'. If you sand across the grain, the grit of the sandpaper will leave grooves– like scratches or small cuts that are obvious in the finished project. When you sand ‘with the grain', those scratches are less obvious, as they blend in with the natural grain of the wood. But sometimes in life, we should be actually sanding ‘against' the grain in order to produce a beautiful and unique life. Listen in to learn more about the benefits of sanding ‘against the grain' in your own simple life!Understanding Wood Grain Patterns: Types, Examples & Terms (duffieldtimber.com)Send us a textSupport the showThe Farm Wife (website)Let's Visit! (email)Amazon Shop PageGreat Products by The Farm Wife:The Simple Life WorkbookSimple Life Home Finance BundleThe Art of HomemakingFind other helpful Simple Life Products in The Farm Wife ShopDo you want to learn more about living a simple life? Then a great place to start is with the books in my Simple Life Series! Living a Simple Life on the Farm (my story) The Search for a Simple Life How to Cook a Possum: Yesterday's Skills & Frugal Tips for a Simple Life (don't worry – this isn't a cookbook!)

No matter how crazy you think it is, this is how the average 'undecided' voter votes. Cultural values matter and when you mass import a radically different culture there's going to be  problems. Assimilating to the dominant culture. Weak republicans helped facilitate the mass importation of illegals. What a military mascot does for the Democrats. Sanding off the rough edges. See omnystudio.com/listener for privacy information.

This Episodes Questions: Brians Questions: As a hobbyist who buys wood occasionally, I have never developed the skill of correctly identifying the grain pattern or even the cut type (plain, rift, quarter) in rough cut lumber at lumber yards. It's all fuzzy and impossible for me to discern. Any tips for a dumb dumb like me? American Bob Hey guys! I started listening to your podcast a couple months ago, and began dabbling in woodworking only a couple months before that. I can't tell you how helpful your podcasts has been to me, as I don't really have anyone to show me the ropes. I'm usually pretty good at figuring things out via YouTube and Google, but a lot of use concepts are so new to me that I'm not sure what to search for. I don't know what I don't know. I have to admit that I have been cutting off sending in a question to you guys primarily because I'm listening to your podcast while I'm in my fledgling shop and I have a hard time putting down what I'm doing to get on my phone if I don't have to. Having said that, I'm sure that I can come up with enough questions to completely fill out half a dozen podcast episodes, so I'm finally answering the call. Thank you in advance for your answers and insights. I chose to serve with this question because it is an issue I run into constantly. To put it simply, I do not as of yet own jointer or a planer, and I can't afford one for the time being. I have been trying to make do with a number of workarounds, to varying degrees of success. For example, cleaning a board or panel with a belt sander, which is exactly as much fun as it sounds. My recently discovered work around for jointing boards is a jig I made for my table saw. It's essentially a fence I guess, with an outfeed and in feed side. The outfeed side is flush with my saw blade, while the infeed side is offset. The width of my saw blade. I can send you a picture if you are curious. My question is, for a person who absolutely cannot afford a jointer and planer right now, are there any other tricks you can think of to accomplish these essential woodworking processes? Thanks again for your help and all the great information you provide. Zach Guys Questions: Hello, this is Zach from Minnesota again. I have a question that has been bugging me for quite some time now. Ever since I learned about water-based polyurethane, it's almost exclusively what I have used to finish my projects. I almost always apply this with my Wagner or HVLP sprayer with a detail nozzle and it has worked great for me. There are a lot of topics in woodworking where people have opposing views. One practice, however, that seems to be universally supported, and strongly so, is sanding between codes of polyurethane. I very, very rarely follow this practice. For whatever reason, on one project I did not do this and it turned out fine, so I haven't really bothered since, and I haven't had any issues, even when I've applied polyurethane over paint. Why is sanding so strongly recommended, and what issues am I risking by skipping this step? Thanks again. Zach Good morning Woodshop Life Podcast Folks! I am about to finish up my largest commissioned work, netting me a nice little profit.  This isn't my full time job, so any sort of money I make from woodworking I want to put back into the shop and continue to grow as a woodworker. I have the Dewalt DW735 Planer and a Grizzly 8” Jointer, both with straight knife cutter heads.  If I could only do one for now, Which one should I upgrade first to a helical cutter head? I love listening to you all when I am in the shop, and have grown tremendously as a woodworker because of it!  Keep up the great work! Nathan Huys Questions: I just built a router table with a lift.  Was going to upgrade to a 3+ hp router as I have been told “the large bits need 3 or more hp”.   Looking at the routers I can purchase they all come with 15 amp plugs. The 15 amp can only carry 2.4 hp max no matter what the hp of the motor is.  Even if the plug / receptacle is 20 amp it still could not carry the watts/hp of 3 hp.    Just wondering why I should spend the money to upgrade.  Can you enlighten me? Thanks and love the show. John-Michael Do you have any tips for drilling the holes in legs to insert leg levelers? I have practiced a few times and I can't consistently get the holes straight. I have avoided using the leg levelers because of this. Thanks Jeff

Wayne and Rob are joined by guest Robbie Smith to discuss the new Bona Diamond Sanding Plates for the Bona Power Drive. Follow Bona US Professional online: Website: https://www1.bona.com/en-us/professional/ Subscribe on YouTube: https://www.youtube.com/BonaProfessional Facebook: https://www.facebook.com/bonauspro/ Instagram: https://www.instagram.com/bonapro.us/

Wayne and Rob discuss the features and benefits of the Bona CombiEdge with guest Jeremiah Strong. Follow Bona US Professional online: Website: https://www1.bona.com/en-us/professional/ Subscribe on YouTube: https://www.youtube.com/BonaProfessional Facebook: https://www.facebook.com/bonauspro/ Instagram: https://www.instagram.com/bonapro.us/

3M™ makes a lot of useful products for contract painters. In this sponsored podcast, we get tips from three 3M™ experts on how to best utilize a variety of products, including respirators, sanding equipment, and tapes.

Help support future episodes of the podcast at: https://patreon.com/workshopbanter Donate via PayPal: https://paypal.me/workshopbanter In this episode we discuss new tools, if the Workshop Banter podcast is coming to an end, new sanding discs and buying things online You can find us at: Badger Workshop on YouTube (Matthew Smith) https://www.youtube.com/c/Badgerworkshop www.badgerworkshop.com Rag 'n' Bone Brown on YouTube (Keith Brown) https://www.youtube.com/c/RagnBoneBrown www.ragnbonebrown.com Our Socials / Get In Touch! www.workshopbanter.com Instagram @workshopbanter Facebook @workshopbanter workshopbanter@gmail.com Our Recommendations: Mike Krabal - Camper Project https://youtu.be/B9qug1rEQnM?si=QOxRhJQHw8_2E-Ci  @Smallbarnworkshop  https://www.youtube.com/@Smallbarnworkshop --- Send in a voice message: https://podcasters.spotify.com/pod/show/workshopbanter/message

This Episode's Quesions: Brians Questions: I plan to build a handtool workbench in the future, maybe in a year or so, but as of right now, I do not have any workholding devices.  I have a large assembly table that does have an overhang and the top is 1.25" thick.  I have been using clamps to the top as a stop for planing and it does not work very well.  I also need a way to hold the wood for using chisels, and I haven't bought any dovetailing tools yet because of the lack of workholding devices.  Are there any good vises that don't require cutting a hole in my assembly table or makeshift ways to hold the wood until I can build a proper bench? Thanks Jeff When sanding end grain, say when you've got a panel where you've chamfered or rounded over the edge, which direction should you sand? I'd imagine you continue to follow the grain direction from the adjacent face grain but I'm not sure. Can you sand across the grain? Thanks for the great podcast, you guys really do have the best wood working show out there! Eric Guys Quesions: Hey Guys I am looking to set up a shop in my  unheated garage. I live in Canada so the weather is inconsistent. Very cold in the winter and very hot and humid in the summer. I am thinking of setting up a small workbench in my basement to cut joinery and do glue ups/assembly. I would keep all of my big power tools( table saw, planer etc.) in the garage. This setup would allow me to work comfortably through the year. My question is with wood movement. If I stored wood in my air conditioned basement and just took it out to the garage for a few hours at a time to plane and cut to size and then brought it back inside to cut joinery with hand tools, would the few hours spent in the humid or cold garage be enough time to warp the boards after I brought them back in? Heating the garage isn't  a realistic option right now as I have two young children and would probably only be able to get a few hours in the shop a week. (Not worth the cost) Thanks for all of the help. This podcast has been a huge influence in helping me to get started with woodworking. Derek I have a small benchtop jointer that a friend gave me for free and a Dewalt 735 planer. For anything but pretty small parts, I use a sled to joint lumber in my planer. I'd like to upgrade both of these eventually. I have a big shop with plenty of power, so neither of those are an issue. My budget is generally the limiting factor. I do plan to keep using standalone machines for the convenience of maintaining settings and flexibility of workflow.  I'd like to get a big jointer first and keep using the 735 while I save up for a big, heavy 220v planer. My question is about 12 inch combo machines. I keep seeing decent 12" combo machines come up used for way less than I can find a standalone 12" jointer. I've seen a few of the Jet machines for $2k-$2500 and a friend recently got a Hammer A3 31 for $3500. Even new, combo machines seem to run way cheaper than a 12" jointer. Why? I understand the beds are shorter, but other than that, what is the disadvantage. Is it ridiculous to buy one if I have no long term need of the planer function and don't plan to use it? Parker Huys Quesions: Hey guys, Thank you for your many thoughtful responses to the questions you receive from your listeners. I  tend to get bored after I've made the same type of project several times (ie pencil boxes, pens, etc..). If I am not in a time crunch,  I like figuring out how to do something to make a project a little more challenging and interesting. I like looking at projects to give me some inspiration on how I might make a new project.  Early on in my woodworking journey I gained a lot of positive inspiration from watchin 'New Yankee Workshop'. The way Norm broke down processes in his projects was very helpful to me. However, there are some projects I've seen which are incredibly intimidating.(ie  highboys, Maloof rockers, etc...).  While I admire these types of projects,  I don't think I would tackle them without taking a specific class.  Where do you guys find inspiration for you projects? Are there any type of projects that intimidate you? Thank you for your responses. Have a great day. Chuck I am designing a dresser which will be 48” high and 72” wide and a chest of drawers which will be 60” high and 40” wide. I would like to join the carcass sides and top with dovetails. With the sides being 48” and 60” and the width being 72” and 60”, how should I clamp the sides and top/bottom to my bench and stand in order to cut the dovetails by hand? I'm only 5'8” and have never cut dovetails up by my head. With a dresser and chest of drawers being the above sizes, would you recommend another method for my joinery? Love the podcast, keep up the great work!! Mike

Guest: Eoghan McCabe, CEO, Chairman, and Co-Founder of Intercom“We are not ready for the degree to which our world is going to change,” says Intercom CEO Eoghan McCabe, “in insane and incredible ways.” When he co-founded the company in 2011, the Irish-born entrepreneur was making it easier for companies to offer human customer service to their customers. But Eoghan believes “every single type of knowledge work” will soon be done by AI, and Intercom is well on its way to that destination: 45 percent of all tickets are being answered by bots now, and he expects that number to climb to 70 percent by 2026. “The agents no longer have to do the repetitive, painful, boring work,” Eoghan says. “They can focus on the more human, creative, interesting work that requires their empathy and creativity.”In this episode, Eoghan and Joubin discuss fitting in, Archana Agrawal, authentic comms, taking risks, returning to the company you founded, politics at work, celebrating innovation, therapy for founders, and Ram Dass.Chapters:(01:04) - Insecurity and success (06:16) - What Intercom does (08:20) - Reinvention and “big company values” (15:50) - Becoming an AI company (16:53) - 2011 vs. 2024 in San Francisco (21:03) - AI for customer service — and more (25:07) - “The shitty gift that being attacked brings” (30:25) - Expectations vs. reality, part one (33:16) - What success means now (36:08) - Running away (39:56) - Coming back (41:58) - Being busy is BS (44:10) - Expectations vs. reality, part two (45:44) - Self-mastery (50:38) - Sanding off the rough edges (55:08) - Who Intercom is hiring and what “grit” means to Eoghan Links:Connect with EoghanTwitterLinkedInConnect with JoubinTwitterLinkedInEmail: grit@kleinerperkins.com Learn more about Kleiner PerkinsThis episode was edited by Eric Johnson from LightningPod.fm

In this Portrait of an Editor, Dave Wielgosz discusses his move from the East Coast to the West Coast and his journey from editor to writer. Along the way, we cover what could help you become an editor at DC Comics or Marvel and the support he got from his folks in his hometown. Dave let me ramble on about my obsession with DC's 80-page Giants and the importance of short stories like them for a writer's profile and for an editor to test talent.Portrait of an Editor has a sponsor: Magic Mind, an excellent productivity elixir. The show's discounts are available at https://www.magicmind.co/portraitofaneditor with discount code ANTIX20.

In this Portrait of an Editor, Dave Wielgosz discusses his move from the East Coast to the West Coast and his journey from editor to writer. Along the way, we cover what could help you become an editor at DC Comics or Marvel and the support he got from his folks in his hometown. Dave let me ramble on about my obsession with DC's 80-page Giants and the importance of short stories like them for a writer's profile and for an editor to test talent.Portrait of an Editor has a sponsor: Magic Mind, an excellent productivity elixir. The show's discounts are available at https://www.magicmind.co/portraitofaneditor with discount code ANTIX20.

This Episode's Questions: Brian's Questions: Gentlemen, First, I hope you all know that the sounds that pop through occasionally from your families in the background don't make a bad podcast; they make you human and THAT is part of what makes your podcast great. On the subject of families, I have 3 young sons (6, 4, 2 years old) that love "helping" with woodworking projects and learning about tools.  The family has outgrown our current dinner table, and I've been tasked with building a new one.  I'm planning a 6.5'x3.5' dinner table that doesn't need to be an showpiece heirloom dining table, but I'd love to produce something that will look nice and can handle the inevitable mayhem of a young family.   Can you recommend a wood species and some finish options that will stand up to these demands? I can feel white oak calling me here, should I answer the call?  (For context, our kitchen cabinets and floors are all darker wood tones so more dark might just blend into the background too much.) Thank you as always for your contribution to the woodworking community.  Your knowledge, experience, and unique characters make this truly the best woodworking podcast. Evan Hey guys! Love the podcast and appreciate all the work you put into it. My wife and I have been planning a remodel of our kitchen for a few years. I really want to build the cabinets, but also recognize that my time is pretty limited with work, and my wife doesn't want a partially completed kitchen for months. I'm currently designing the kitchen in Sketchup to a pretty high level of detail because we have some restrictions with the space that I need to ensure I take into account. The goal is to work through as much as I can in Sketchup to reduce guesswork, decisions, and time once I start  building. We have currently decided that I will build the cabinet boxes and face-frames since it will be easer to custom design and build for the space, and I'm researching options for outsourcing the drawer boxes and drawer/door fronts. We are planning on using rift sawn white oak with inset door and drawer fronts. The drawer boxes seem like a pretty easy option to outsource, but the fronts seem like they could pose some challenges that I may not be considering. Should I be worried about significant color or grain differences between the outsourced supplier, and what I can get locally to build the face-frames? Since they will be inset, do you have a recommendation on sizing when I order? For example, I'm planning on a 3/32" reveal between the face-frame and doors/drawers, should I order with 1/16" or the full 3/32" oversized so I can trim to the exact opening once the cabinets are installed in case something shifts? Thanks for the help! Jason Guy's Questions: Hi guys. Love the podcast! Wish I could find a fishing podcast as good. Life would be perfect. I made the move to a Fuji Sprayer.  I bought one with the gravity feed gun but now think I made a mistake. I think it would be easier to hold finish in the cup between coats. What is your preference and why? Thanks so much. Joe Hi Guys, I recently asked a question concerning how to glue up a frame and panel so it's flat. I took your advice and it worked great. Thanks so much!!! I have two unrelated questions: I recently purchased expensive hinges from Horton-brasses. When I received the hinges I made a jig out of MDF so I could simply rout out the mortises for the hinges to sit in. As usual, I make the jig so they are a perfect fit for the hing. I tested the jig on a piece of scrap and the hinge fit perfectly. I then used the jig on a cabinet I made and the hinge did not fit. I tried the various hinges I purchased and only one of the hinges fit (the hinge I used to make and test the jig). After measuring the hinges, I discovered that they were all different sizes varying by about .01”. I contacted Horton-brasses and explained the problem and they told me that their acceptable tolerance is +/- .05”. With some simple math this means that their tolerance is about 1/16”. I have purchased hinges from other manufacturers and never had this problem before. My question is: am I being too picky to expect the hinges to be the same size or a lot closer than +/- .01? When you make jigs for hinges, do you leave a little extra room for hinges that are off a little? Finally, where do you recommend purchasing hinges and other hardware from? Mike Gitberg Huy's Questions: Hi fellas, I would love to hear some advice regarding sanders. I have a small hobby business of selling large wood slabs that I mill with a chainsaw mill. I know this isn't traditional woodworking but it is enjoyable and brings me enough money to buy new tools and gain experience with real woodworking. After each slab is dried I plane it down with a TrueTrac router sled system. It works great and only leaves minor ridges to sand out except on knots, crotch grain, curl and all the other "defects" that folks like in slabs where I get some tear out. I usually run 40 grit over each slab with my Dewalt random orbit but this can take a long time to get the tear out sanded. I have an old Makita belt sander but no matter what I do that seems to dig in at the tear of the belt and leave grooves in the wood. If I were to buy a dedicated sander for just 40/60 grit first pass of slabs what do you recommend? A better belt sander? Or a wider diameter orbit and high quality sand paper? Thanks for the great podcast, keep it up! Jeremy Westra I've been woodworking for a few years but I'm still fairly new. Recently I've been building chairs that are either heavily influenced or loose copies of some famous Hans Wegner designs. So far I've built these chairs for friends and family but I'm getting more and more unsolicited requests. While I don't think making chairs for family and friends is an issue, I suspect posting and selling chairs online that are obvious copies of classic designs (like Wegner's ch25) could be patent or trademark infringement. What do you think? Also, its worth mentioning, many large retailers like Target, Walmart, Wayfair, etc. are selling obvious knock-offs based on famous designs while not mentioning the original. Apparently this is ok since I'm sure their legal departments reviewed the issue. I'd love to hear your thoughts. Earl

SHOW NOTES: In this one-stop shop for all things home improvement, we'll tackle the war against bathroom germs, explore the art of building a paver patio that lasts, reveal expert tips for restoring rotted wood, and answer more questions from callers. Whether you're a seasoned DIY enthusiast or a novice homeowner, this episode has something for everyone! - Bathroom Germs: Experts are flush with ideas on the best way to stop the spread of bathroom germs. - Paver Patio: Get some tricks of the trade on building a paver patio that will last for years to come. - Rotted Wood: When wet weather leads to rotted wood, learn how to restore and rebuild the damaged areas.   Q & A: - Windows: Amy thinks her windows are discolored from water damage, but it's probably normal fading from sun and rain. Sanding and exterior polyurethane can restore the finish. - Shower Plumbing: The shower temperature changes whenever the toilet flushes. Brad needs to install a pressure balance valve to regulate the mix of hot and cold water. - Pest Control: Ick! Kelly wants to get rid of bugs, slugs, and rodents. She must seal any gaps, remove any food that may attract rodents, and hire a professional for general pesticide treatment. - Mortar Repair: The mortar is breaking apart between the doorframes and limestone of Steve's home. He gets tips on removing the loose mortar and how to repoint those areas. - Tree Roots: Large tree roots in Kevin's yard are a problem. We suggest covering them with natural landscaping solutions like mulch, soil, or groundcover plants. - Electrical Outlets: Pat has questions about installing GFCI outlets in his kitchen. They're good to have and we explain how they work and how he can do it. - Sealing Concrete: Past flooding left cracks in Bonnie's basement floor. She can use silicone caulk to seal them and add a two-part epoxy product over the surface. - Plumbing Noise: Robert's new faucet is making a trumpet sound! He get tips on checking the washer and aerator for obstructions before having to replace the faucet. - Ventilation: After reshingling his roof, Ken gets advice about removing the power vent, adding ridge vents, and completely opening the soffits to improve ventilation.   ASK A QUESTION: Need help with your own home improvement or décor question? We'd love to help! Call the show 24/7 at 888-MONEY-PIT (888-666-3974) or post your question here: https://www.moneypit.com/ask. Learn more about your ad choices. Visit podcastchoices.com/adchoices

SHOW NOTES: Today's show has tips for crafting your perfect outdoor living space, asking key questions before hiring a contractor, and choosing the best tile for your next project. Whether your DIY project is indoors or outdoors, we've got the answers you need for all your home improvement questions! - Outdoor Living: Follow these 5 tips for creating the perfect outdoor living space. - Hiring Contractors: Choose wisely by asking these 5 key questions before hiring a home improvement professional. - Choosing Tile: Learn how to pick the best type of tile for your project.   Q & A: - HVAC Water: Gail's boiler provides both the heat and the hot water. She needs to find out how to set the mixing valve so the shower water won't be too hot. - Bathroom Vent: Mike wonders about connecting his bathroom fan vent to the plumbing vent. He can't do that, but we've got tips on how to run the exhaust vent to the outside. - Plumbing: A cracked waste pipe flooded the basement. Helen should file an insurance claim and hire a remediation company to clean up the sewage damage. - Foundation Cracks: Pat has multiple big cracks in his foundation walls. He'll need a structural engineer to address the problem and design the proper repairs. - Odors: Mason can't find the source of odors in his home. We have a few ideas and give him tips on steam cleaning the carpets and priming and painting the walls to seal them. - Textured Wall Prep: Dave wants to tile over a textured bathroom wall. Sanding the surface will give him better adhesion to glue the tile right over it. - Kitchen Cabinet Lazy Susan: The top shelf of an old kitchen cabinet carousel has dropped. Marge gets advice on how to find parts and try to repair it.   ASK A QUESTION: Need help with your own home improvement or décor question? We'd love to help! Call the show 24/7 at 888-MONEY-PIT (888-666-3974) or post your question here: https://www.moneypit.com/ask. Learn more about your ad choices. Visit podcastchoices.com/adchoices

Wayne and Rob are joined by guest Robby Smith to discuss the new Bona Diamond Sanding Plates for the Bona Power Drive. Follow Bona US Professional online: Website: https://www1.bona.com/en-us/professional/ Subscribe on YouTube: https://www.youtube.com/BonaProfessional Facebook: https://www.facebook.com/bonauspro/ Instagram: https://www.instagram.com/bonapro.us/

Listeners have be contacting me with tips they wanted to share. Sanding, planing and finishing, I'm sure you will find these helpful.RecommendationsSolidworks for Veterans https://veteran-store.solidworks.com/veteran/default.phpThe Edge-On-Up Sharpness Testers https://www.sharpeningsupplies.com/Edge-On-Up-Industrial-Edge-Tester-P1562C286.aspxSpecial Thanks to Listeners InWoonsocket, Rhode IslandBrackley, Northamptonshireone listener in Belize!Support The Show On:     Buy Me A Coffee: https://www.buymeacoffee.com/workatwoodwork     Donate Directly: https://www.workingatwoodworking.com/support.phpCoaching:  https://www.workingatwoodworking.com/coaching.phpYoutube Channel: https://www.youtube.com/@workingatwoodworking Sound effects from: http://www.freesfx.co.uk  Working At Woodworking Podcast hopes to encourage and provide information to amateur woodworkers who dream about turning their hobby into a full-time or part-time business, and to help current business owners succeed. Business coaching is available at very reasonable rates.Support the showContact Me: https://www.workingatwoodworking.comSupport This Podcast: Buy Me A Coffee: https://www.buymeacoffee.com/workatwoodwork

Sanding is a challenge for any DIYer, but a professional woodworker must learn to sand quickly, effectively, and economically. Here are some tips I have learned over the years.RecommendationsSanding With Fein Multimaster https://youtu.be/3SZY2rqmkcALargest Sandpaper Test EVER Done https://youtu.be/NZDCRFi8dKY?si=Bc4S49Ru1U0ST8jBClark Howard on Furniture https://youtu.be/hJmohkch3Ss?si=O2JtZCrMVDqAjVIv&t=908Special Thanks to Listeners InDetroit, MISaskatoon, Saskatchewanone listener in Pakistan! Support The Show On: Buy Me A Coffee: https://www.buymeacoffee.com/workatwoodwork Donate Directly: https://www.workingatwoodworking.com/support.phpCoaching: https://www.workingatwoodworking.com/coaching.phpYoutube Channel:https://www.youtube.com/@workingatwoodworkingSound effects from: http://www.freesfx.co.uk  Working At Woodworking Podcast hopes to encourage and provide information to amateur woodworkers who dream about turning their hobby into a full-time or part-time business, and to help current business owners succeed. Business coaching is available at very reasonable rates.Support the showContact Me: https://www.workingatwoodworking.comSupport This Podcast: Buy Me A Coffee: https://www.buymeacoffee.com/workatwoodwork

Welcome to another episode of the UK Flooring Podcast, where we delve into the fascinating world of flooring, sharing insights, trends, and conversations with industry experts.In this episode, we are joined by Ben Osborne, a renowned figure in the floor sanding and refinishing space, known for his extensive online presence with over 10 million combined views on his websites and YouTube channel.Find Ben's insightful floor sanding tips and tutorials on his website: How to Sand a Floor and YouTube channel: HowToSandAFloor.Episode BreakdownGetting to Know Ben OsborneBen introduces himself as a floor sander, YouTuber, and family man with a passion for politics.He shares his journey from working in a call center to becoming a floor sanding expert and starting his own business in 2012.The Evolution of His BusinessBen discusses the growth of his business, his transition to self-employment, and the challenges of perfectionism in his work.Insights into expanding his team and the operational dynamics of his business.Ben's YouTube JourneyThe story behind his first YouTube video and how it evolved into a successful channel.Strategies for creating engaging content and the unpredictability of YouTube success.Discussion on monetizing YouTube content and the impact of specific videos on his channel's growth.Challenges and Successes in Floor SandingBen talks about the difficulties faced in floor sanding, including dealing with unpredictable flooring conditions and customer interactions.Insights into his preferences for flooring products, stains, and lacquers.Business Insights and Personal GrowthBen shares valuable lessons learned in business, particularly the importance of continuous learning and being open to new ideas.Discussion on the challenges of managing a team and finding the right people.Rapid Fire QuestionsBen answers quick questions about his investment choices, least favorite business tasks, and notable personalities he'd like to meet.He concludes by reflecting on what's currently holding him back and how he's addressing these challenges.ConclusionA big thank you to Ben Osborne for sharing his expertise and experiences in the floor sanding industry.Reminder to listeners to check out Ben's work on his YouTube channel and website.Stay tuned for more episodes from the UK Flooring Podcast. Hosted on Acast. See acast.com/privacy for more information.

Fit your miniature pieces together and get them ready for decoration! Shaping, sanding and glue are so important to getting the derired shape that fits your display exactly. So watch as I create some pieces for us to emboss in the next episode Yes this podcast episode is 1 day late.....I could not get my editor to work. Then the internet was offline for several hours! I guess it was not meant to be! So- better late thn never.... If you'd like to purchase some of my Fairy garden items, please head to my Etsy shop here: https://sprouteddreams.etsy.com Or visit the site here: https://www.sprouteddreams.com Thanks so much for watching or listening!

Wait, SOB stands for something else?? Taylor Swift song or fragrance? Onion Ring dance on The Phone Jenks and more!Leave a rating and review wherever you listen, it helps us out a lot! Also follow us on social @joeyandlaurenshow

Hosted on Acast. See acast.com/privacy for more information.

Welcome to the first ever Metalsmith Society podcast episode! My goal is to be able to discuss some the most popular tips we have shared as a community on Instagram @metalsmithsociety often after a tip is shared there is gold in comments! Great questions, valid counterpoints and entirely different techniques suggested. So join me for this episode as you work in your studio today! In this episode I discussed Japanese Finger Guards you can use to protect your fingers while jewelry making. See the Instagram post here: https://www.instagram.com/reel/C1Mt8Qtu7oAffiliate link to purchase the finger guards from Pepetools: https://pepetools.com/products/japanese-rubber-finger-guards?aff=2Patina tip with refillable watercolor brush. See the Instagram post here: https://www.instagram.com/reel/C1VG3iiOZThAffiliate link to purchase refillable water color brushes: https://amzn.to/3tAiYFvAffiliate link for Jax Silver Blackener: https://amzn.to/3RPaqT1Tip for creating decorative bezel wires with craft scissors. See the Instagram post here: https://www.instagram.com/p/C1eIeuRscICAffiliate link for inexpensive craft scissors: https://amzn.to/3TQ8mNmCheck out my book Metalsmith Society's Guide To Jewelry Making: https://metalsmithsociety.com/pages/bookSupport the podcast by becoming a Patreon: https://www.patreon.com/metalsmithsociety Mistake from episode, the was I called "resistance" wax is actually Renaissance wax. It's used to keep metals from tarnishing and oxidising and it can help keep patina looking fresh!Music attribution: Stock Music provided by RomanSenykMusic, from Pond5

See omnystudio.com/listener for privacy information.

Find More Episodes on PCA Overdrive: https://www.pcaoverdrive.org/ask-a-painter PCA Overdrive is free for members. Not a member? Download the app on the Apple Store or Google Play and enjoy a 7 day free trial! Become a member: https://www.pcapainted.org/membership-resources/ Painting Contractors Association - PCA Upcoming Events: -Women In Paint Conference 1-3 Nov https://www.pcapainted.org/event/women-in-paint/ -Commercial Painting Conference 1-3 Nov https://www.pcapainted.org/.../pca-commercial-painting.../ -The EXPO! 26 Feb - 1 Mar https://www.pcapainted.org/expo/ Want a LIVE Masters Class in your area? Contact Marsha at the PCA mbass@pcapainted.org and we can arrange it for you! Save $100 on the Busibess Training below w the promo code “NICK100”! A personal ask from me to you: Join the PCA Business Accelerator! The easiest way to professionalize your business: cohort of your peers, learning management system, subject matter experts from our industry. To sign up: https://www.pcapainted.org/business-training/ @followers

SHOW NOTES: - Getting Rid of Leaves: Rake in some tips on the best ways to get rid of fallen leaves to help next year's garden. - Concrete Repair and Resurfacing: Learn the easy way to restore cracked and damaged concrete surfaces. - Energy-Efficient Windows: Keep drafts out and heat in by choosing the best energy-efficient windows.   Q & A: - Peeling Linoleum Floor: Mindy has a peeling linoleum floor with even more layers underneath. It will take some work, but we recommend pulling it all up before installing a new floor. - Uneven Heating and Cooling: It's hard to regulate temperatures in a split-level home. Brent should check the registers and returns and consider adding supplemental heating. - Crumbling Concrete: The concrete basement floor is crumbling from water damage. Mary should address any drainage issues first, then use a patching compound and epoxy floor paint. - Retaining Wall Runoff: Water from a retaining wall is seeping into Richard's walkout basement. He gets tips on how to intercept and redirect the water. - Sealing Siding: Peggy's siding is flush against a concrete slab where rainwater pools. She must remove some of the bottom siding and install flashing. - Paint vs. Stain for a Deck: Half of Teresa's wood deck is painted and the other half is unfinished. She can paint over stain, but she can't stain over paint. She'll need to choose one or have a two-tone deck. - Glue Removal: Charlotte needs to remove glue that got on the new floor after it was installed, but she should use an adhesive remover carefully to avoid damaging the surface. - Pet Stains on Wood Floor: Oops! The dog had an accident on the wood floor that Mike plans to refinish. Sanding should cut through the stain before he adds coats of polyurethane.   ASK A QUESTION: Need help with your own home improvement or décor question? We'd love to help! Call the show 24/7 at 888-MONEY-PIT (888-666-3974) or post your question here: https://www.moneypit.com/ask. Learn more about your ad choices. Visit podcastchoices.com/adchoices

Wayne and Rob discuss the importance of orbital sanders in the sand and finish process. Follow Bona US Professional online: Website: https://www1.bona.com/en-us/professional/ Subscribe on YouTube: https://www.youtube.com/BonaProfessional Facebook: https://www.facebook.com/bonauspro/ Instagram: https://www.instagram.com/bonapro.us/

See omnystudio.com/listener for privacy information.

Sanding isn't always necessary to restore a hardwood floor's luster and appearance. Learn how to determine whether it's needed - and the tools to use either way.  Learn more about your ad choices. Visit podcastchoices.com/adchoices

Wayne and Rob revisit the very important topic of taking care of your body when working on the job. Follow Bona US Professional online: Website: https://www1.bona.com/en-us/professional/ Subscribe on YouTube: https://www.youtube.com/BonaProfessional Facebook: https://www.facebook.com/bonauspro/ Instagram: https://www.instagram.com/bonapro.us/

In this episode Jeff shares with us his recent family vacation driving an RV out West. Jeff and his family visited so many places that include St. Louis, MO, Oklahoma, New Mexico, Arizona, Colorado, Wyoming, South Dakota, Iowa and Chicago, IL. They visited National Parks and dear friends in the home building industry too!In this episode Jeff continues to discuss the home building process that Wieland Builders follows. During the Mid Stage Phase we celebrate that the drywall is up and now the moisture control continues for the walls and flooring inside the home. Sanding of the drywall is completed and the floor prep and roll-out begins. During this time the floors are screwed down and joints are sanded so there are no future squeaks. Also, multiple coats of paint are applied to the ceiling, one coat on the drywall and the electrician installs all plugs, switches, outlets and can lights.  The furnace is hard wired and the sump pump installed and then ceramic tile and hardwood flooring is installed all while continuing to check the moisture reading on the interior of the home. The cabinets and the built-ins are next to be installed.Te next stage is the Trim Stage. Inside the home during this stage the beams are set and then the inside trim, sills, casing, molding, doors, cabinetry are installed and the countertop templates are measured. The interior painting is completed. On the outside of the home during this phase the brick is finished and cleaned, straw put down around the home to prevent mud splashing on the newly installed brick.  The trim is installed, vinyl wrap, doors and gutters. When we are done on the outside then the stone is applied on the home and also on any fireplaces both on the inside and outside of the home.  Landscaper does the walkway layout planning during this phase. Concrete prep work and pouring of the porches and driveway is completed.  This is an exciting phase and a time for us to share the progress with our clients. We provide a special date night for our clients to enjoy on us and time to visit the home to see how all the selections and planning has come together.When Jeff continues the Home Building Phases in a future podcast, he will be discussing the Finishing and Mechanics Phases.Email Jeff your comments, questions, topic requests or be a guest on The WB Download. WBDOWNLOAD@wielandbuilders.comSee Wieland Builders custom home gallery  www.wielandbuilders.comSee podcast behind the scenes photos Follow us on Facebook, Instagram, YouTube, Houzz or Pinterest

New hobbyists, or veterans to Warhammer all need accessories for their gaming/hobby experience. This top 15 list caters to all! This is not just for new players wondering what to buy first, but also more experienced hobbyists looking to upgrade. Hosts: David tha Warboss & Medicae Steve Show: Top Accessories  Good sprue clippers - citadel ones are nice, but a little pricey  Xacto knife with extra blades – generic from Walmart or any craft store  Bright hobby light  Glue - Tamiya Plastic Cement or Team Super Glue  Paint- Citadel, Vallejo, ProAcryl (found at local store) Decent and garbage brushes - Cheap  or Mid-price  Wet pallet  Water pot  Hobby mat Citadel tape measure – small/light  Magnifying goggles Sanding sticks Painting Handle or wooden blocks + sticky tack  Paint tray – makeup holder  Tweezers – decals, shrub/grass  Web - ⁠www.dadhammerpodcast.com⁠ Twitter - ⁠@dadhammerbb⁠ Instagram - ⁠@dadhammerpodcast⁠ Tiktok - ⁠@dadhammerpodcast

This is Zack Fuss, an investor at Irenic Capital, and today we're breaking down the biggest manufacturer of chip making equipment in the world, Applied Materials. Last week, we looked at the other leading equipment maker in the semi-industry, ASML, and while that business currently has a higher market cap, Applied Materials generated more revenue and profit last year. It earned $26 billion, spent $3 billion on R&D and currently has 17,300 patents. To explore the business behind those numbers, I'm joined by Dylan Patel, Chief Analyst at SemiAnalysis. Dylan takes us through the industry's evolution, how Applied's business differs to ASML, and how geopolitics is a double-edged sword. Please enjoy this breakdown of Applied Materials. For the full show notes, transcript, and links to the best content to learn more, check out the episode page here.  ----- This episode is brought to you by Tegus, the modern research platform for leading investors. Tired of running your own expert calls to get up to speed on a company? Tegus lets you ramp faster and find answers to critical questions more efficiently than any alternative method. The gold standard for research, the Tegus platform delivers unmatched access to timely, qualitative insights through the largest and most differentiated expert call transcript database. With over 60,000 transcripts spanning 22,000 public and private companies, investors can accelerate their fundamental research process by discovering highly-differentiated and reliable insights that can't be found anywhere else in the market. As a listener, drive your next investment thesis forward with Tegus for free at tegus.co/patrick. ----- Business Breakdowns is a property of Colossus, LLC. For more episodes of Business Breakdowns, visit joincolossus.com/episodes. Stay up to date on all our podcasts by signing up to Colossus Weekly, our quick dive every Sunday highlighting the top business and investing concepts from our podcasts and the best of what we read that week. Sign up here. Follow us on Twitter: @JoinColossus | @patrick_oshag | @jspujji | @zbfuss | @ReustleMatt | @domcooke Show Notes (00:02:33) - (First question) - An overview of the vital and diverse semiconductor industry (00:05:11) - The shift to specialization in semiconductors (00:09:04) - Geopolitical factors that impact the sector (00:12:16) - The dynamic evolution of Applied Materials (00:15:22) - What differentiates Applied Materials from their competitors (00:18:52) - Strong margins, growth, and efficient capital allocation drive their financials  (00:22:00) - The cyclical nature of the semiconductor industry (00:24:36) - Optimizing equipment for next-gen chips through collaboration with manufacturers (00:29:09) - How Applied Materials' specialization limits equipment changes for manufacturers (00:32:54) - Contributing factors to Applied Materials' continued growth (00:36:05) - Market share varies by equipment and processes (00:39:13) - Biggest risks for Applied (00:41:23) - AI's growing demand for semiconductors (00:43:20) - Lessons learned from studying Applied Materials Learn more about your ad choices. Visit megaphone.fm/adchoices

Brians Questions: Hi guys, I'm a hobbyist woodworker on the gold coast Australia. I have slowly acquired all the tools I feel are necessary to build those pieces that my children will one day inherit/sell in a yard sale

Ask us a question at:ask.forgecast@gmail.comfind us at:https://www.instagram.com/the.forgecast/https://www.facebook.com/TheForgeCastPodcast/Sam Townshttps://www.instagram.com/samtownsbladesmith/https://www.facebook.com/SamTownsBladesmithhttps://www.youtube.com/channel/UCaJMbidCdie0rbmfN9ckkqwZac Nesbitthttps://www.instagram.com/laughingfishforgehttps://www.facebook,com/laughingfishforgehttps://www.tiktok.com/@laughingfishforgehttps://youtube.com/@laughingfishforge

Catching up on cosplay mishaps and Amber reviews a book that's all about sanding!

Catching up on cosplay mishaps and Amber reviews a book that's all about sanding!

The landscape is changing again, let's get up to speed and get current with PDR advancement. Stay to the end for a special announcement!

Guys Questions: Hey gentlemen, welcome Brian. I have a commission for a big walnut slab table that will live in a nook with windows on 3 sides (lots of UV exposure). What do you recommend for finishing. I seem to recall Guy mentioning some walnut finishes don't hold up well to UV exposure. I'm probably a month out from delivery so hopefully this makes it to the show before then! Sincerely your accidentental woodworking fabricator. Will In the past I've done a few small veneering projects and am currently working on one which will require a few larger panels- about 24”x 31”. Previously I used a train-load of clamps and cauls to press the veneer but now I want to step up my game so I ordered a vacuum press. Thanks to a few of Guy's videos the process seems pretty straightforward but I do have a question on the glue. For veneering my only experience is with Titebond cold press veneer glue with good results but in some videos I've seen some folks recommend Urea-formaldehyde glue - especially for larger panels. Do any of you have experience with this stuff? Sounds a bit nasty but if it's better for the application I'll give it a shot. Thanks! Jeffrey Brians Questions: Been listening to the podcast for a couple years now, and while I'm sorry to see Sean step away for now, I'm happy that you found someone willing to chip in! Two things, both mainly for Brian. One, you've mentioned that you don't have much of a social media presence or any way to really show case your work. While a lot of people do turn to Facebook, Instagram, etc. for this... I wonder if maybe simply an account on SimpleCove.com (Sean's website) might be a good fit? Two... work bench. Lots of questions - what style are you planning (Roubo, Nicholson, Moravian, Shaker, hybrid, something else?), size, what kind of wood are you thinking of using - fancy with hardwoods, or something simpler ala Siemensen's Naked Woodworker bench or Schwarz's Anarchist Workbench (both 2x construction lumber)? I think you'd mentioned still being up in the air about vise hardware - are you leaning towards wood screws like Lake Erie Toolworks, or metal like Benchcrafted? Maybe Hovarter, which has some quick-release options? And then the really big question... dog holes. Round or square? Answer carefully ;) I'm one of those people who has to fight the urge to build almost every bench design I see. Started with a Nicholson, but kind of went off in a weird direction with it and didn't like how it turned out. Deconstructed it and re-purposed most of the lumber for other projects. Couldn't make up my mind what I wanted to build next (not enough room for one of each!) so I put some inexpensive import (Yost) vises on a utility bench in the shop, and have been living with that for now. Not ideal, but it's letting me work out a few ideas on a trial basis before I have to commit. Very much looking forward to hearing (or seeing) more about your bench project! - Monte Thank you all for spreading the knowledge and answering questions. I find myself building more cabinets lately out of plywood and I'm edge banding them with solid lumber (I go with 5/16 on the banding). I cut the banding a little wider than the sheet goods, glue it on and then trim it flush. I'm running into some issues during the trimming that I'm hoping you guys can chime in on. Often times, when I'm trimming the banding I get a little gouge here and there on the face veneer. It's not a huge deal on paint grade stuff but when I'm using something like walnut, cherry or white oak ply, it becomes a problem. What tips do you have for trimming the edge banding cleanly and efficiently without damaging the veneer? Below are some things I've tried and some of my experiences with these methods. I'm curious if you have other methods, or if you have some tips to improve what I'm already doing. Things I've tried so far: - Router balanced on the edge - so far the worst method. Too tippy and additional supports can take a while to set up, with ocasional slipups still. - Router jig - I saw Fredie @periodcraftsmen share a jig for flush triming the edge banding and I copied it. The jig has a flat wide reference face that rides on the panel face (laid flat) and it has a 90 degree fence that holds up a trim router horizontally. Using a downcut bit, the router is adjusted so that the bit is almost flush to the reference face and it trims the edgebanding protruding above the flat face. I hope you can picture that. This gives good results but I ocasionally run into issues at the start and end of the panel where the jig may want to tip a bit and bite into the face. - Tall fence on the table saw - using it kind of like an L-fence, the sacrificial face is set up above the blade and flush with the outer teeth. The panel rides the fence vertically and the edgbanding rides under the fence where it gets trimmed off. This so far gives the best results especially when I went to an extra tall fence to give it more of a bearing surface and not let the panel tip. Ocasionally the panel is a bit bowed which gives it a bit of trouble and it can be a bit unwieldy if the panel is large. Can be hard to keep it flat on a long panel. It is fast though. - Hand plane - using a block plane carefully work it down. I have still bit into it a few times when not careful but this is overall the most accurate method. It is slow though and can be a pain if there is a lot of trimming. - Bojan Huy's Questions: When you're building a piece of furniture (like a dresser), do you follow a specific order? Like cutting everything first, arming (make sure that everything works), disarming. Karel I love your podcast. You try hard to fully answer questions asked and not provide flippant answers like other shows do. That's what makes this show great. Now to my question. I have been wanting to upgrade my sanding game. I want to reduce the vibration, have it stop quickly, and produce a great result. I would love to hear your thoughts on what you look for in sanders such as the size (5 or 6 in), pad types (soft through hard), brands you have used and liked, and what brand of paper you buy. I'm starting to realize no one sander does it all anymore, so do you have a progression of sander purchases you would make for a simple furniture maker? Thanks you for anything you provide. - Brian Russell