Podcasts about Flexi

Why We Chose Flexi-Schooling — Benefits, Challenges & What It Really Looks Like In this first episode of The Fleximum Life, I'm sharing why we chose flexi-schooling for our family, how it works in the UK, and what a real week looks like in our muddy, messy, joy-filled home ed life. We'll explore the benefits of flexible education, the challenges of part-time school and home learning, and the reasons it's been the right choice for our child's wellbeing and our family values. Whether you're curious about home education, looking into alternative schooling options, or just want a peek into our flexi-school rhythm—this one's for you!

1994 saw some of the most classic releases in hip-hop and among them was the underground classic Between A Rock And A Hard Place from rap duo The Artifacts. Tame One and EL Da Sensai brought hip-hop back to its roots, focusing on MCing, DJing and graffiti-writing over boom bap beats making this album a masterpiece from start to finish.

Mercredi 7 mai:La nouvelle majorité songe à généraliser les flexi-jobs à l'ensemble des secteurs sauf à ceux qui s'y opposent. Flexi-jobs et travail étudiant donnent droit à des cotisations sociales réduites. Selon le syndicat chrétien, ces mesures vont créer un trou d'un milliard et demi d'euros dans les caisses de la Sécu d'ici la fin de la législature.Le black-out de la semaine dernière en Espagne et au Portugal soulève des questions sur la robustesse de notre réseau électrique. Elia reste sur ses gardes, tout comme Mathieu Bihet, le ministre de l'Énergie. Ensemble, ils doivent participer à une réunion avec des experts internationaux pour comprendre ce qu'il s'est passé dans la péninsule ibérique. Entre-temps, la piste de la cyberattaque semble être exclue.Avec les conflits commerciaux, les tensions géopolitiques et la politique controversée du président Trump, la position du dollar américain en tant que monnaie de réserve mondiale est sous pression. L'annonce de lourdes taxes commerciales et surtout l'imprévisibilité des politiques rendent les investisseurs nerveux. La baisse simultanée du dollar et l'augmentation des taux d'intérêt à long terme aux États-Unis illustrent une perte de confiance dans le dollar en tant que monnaie de réserve. Il est donc temps de s'arrêter un instant pour réfléchir à cette fameuse “monnaie de réserve” avec Peter de Keyzer.

1. aktuální novinkyzdanění zaměstnaneckých akciíodpočet úroků z hypotéky placené bytovým družstvem (od roku 2026)drobná novela DPH od 1.7.2025 - zdaňování dlouhodobých zakázekjednotné měsíční hlášení zaměstnavatelenovela zákona o účetnictví pro rok 2025 a 20262. Flexi novela zákoníku práce od 1.6.2025 (od 7.58 min)počítání výpovědní dobyprodloužení zkušební dobynáhrada při ukončení pracovního poměru z důvodu pracovního úrazu apod a její zdaněníupřesnění doplňkového penzijního spoření jako daňově podporovaného produktu spoření na stáří

De regering De Wever wil inzetten op maximale werkgelegenheid. In dit licht bevat het Arizona akkoord verschillende maatregelen met als doel om werken flexibeler te maken, (langdurig) zieken te reactiveren en  ouderen langer op de arbeidsmarkt te houden.In deze podcast geven Sieglien Huyghe en Nele Gijsemans van Claeys & Engels meer duiding bij deze drie thema's.0:00 Intro1:20 Flexibilisering van werk: Flexi-jobs en studentenjobs 3:12 Flexibilisering van werk: Arbeidsduur en impact op de praktijk8:25 Re-integratie van langdurig zieken - responsabilisering werkgevers10:50 Re-integratie van langdurig zieken - responsabilisering werknemers12:20 Ziektebriefje14:34 Verzuimbeleid16:28 Preventie en re-integratie en inschatten arbeidspotentieel22:43 Procedure medische overmacht24:15 Progressieve werkhervatting27:50 Langer werken door een gezonde werk-privé balans en afstappen van SWTVeel kijk- en luisterplezier! MEER INFO over de impact van het regeerakkoord op HR-beleid+++Honger naar meer? SCHRIJF JE IN VOOR DE NIEUWSBRIEF BLIJF OP DE HOOGTE VAN ALLE HR-ACTUAABONNEER JE OP HET #ZIGZAGHR BOOKAZINE It's a great time to be in HR!+++Opgenomen in The Hub (Mechelen) met dank aan The Tipping Point en Tom Nijsmans

¡¡ NUEVO PODCAST !!-Padre José de Jesús Aguilar Valdés nos da una flexión sobre el legado del  Papa Francisco y su lamentable partida…    -Maestro Karl Ayala…  “Mi Yo Creativo con Mi Yo Innovador" (Día Mundial de la Creatividad y la Innovación)  -Ivonne Sieck,  Asesora Certificada en Metabolismo de Natural Slim.  “La Tiroides y su Cuidado”  -Bióloga, Ivonne Guadalupe Olalde… “Calor y  el Riego en las Plantas”  - Arriba Corazones…  Rafael Perrín.

Recent high-profile office return mandates belie a broader availability of flexi-work options from more firms. Synopsis: Every first and third Monday of the month, get a headstart in your personal finance and career with The Straits Times. Those of us who are humming along at a comfortable rhythm with hybrid work might have watched with worry recent developments of major firms insisting on five days in office a week by default. After all, it seemed like an equilibrium was reached in the years following the Covid-19 pandemic of working remotely for at least part of the week. Moreover, this comes after Singapore has issued landmark guidelines that make putting in place a process to fairly evaluate flexi-work arrangement requests compulsory. To piece together what to make of this mixed outlook, ST correspondent Tay Hong Yi speaks with his guest, a two-decade corporate veteran who now works with industry players to put in place progressive workplace practices. His guest is: Mr Aslam Sardar, chief executive of the Institute for Human Resource Professionals Highlights (click/tap above): 2:20 What is driving some employers to get workers back in the office so often? 5:11 Flexi-work arrangements are still more prevalent than before 7:57 Is there a chance of a “domino effect” of firms issuing office return mandates, one after the other? 15:31 How are employers here weighing up their options for office returns? 21:07 What to do if your employer asks you to return to the office more often Read about recent moves to make flexi-work more pervasive here: https://str.sg/tgoM Read Tay Hong Yi's articles: https://str.sg/w6cz Follow Tay Hong Yi on LinkedIn: https://str.sg/AAxy Host: Tay Hong Yi (hytay@sph.com.sg) Produced & edited by: Amirul Karim Executive producers: Ernest Luis, Lynda Hong & Joanna Seow Follow Headstart On Record Podcast channel here: Channel: https://str.sg/wB2m Apple Podcasts: https://str.sg/wuN3 Spotify: https://str.sg/wBr9 Feedback to: podcast@sph.com.sg Get business/career tips in ST's Headstart newsletter: https://str.sg/headstart-nl --- Follow more podcast channels: All-in-one ST Podcasts channel: https://str.sg/wvz7 ST Podcast website: http://str.sg/stpodcasts ST Podcasts YouTube: https://str.sg/4Vwsa --- Get The Straits Times' app, which has a dedicated podcast player section: The App Store: https://str.sg/icyB Google Play: https://str.sg/icyX --- #headstartSee omnystudio.com/listener for privacy information.

Recent high-profile office return mandates belie a broader availability of flexi-work options from more firms. Synopsis: Every first and third Monday of the month, get a headstart in your personal finance and career with The Straits Times. Those of us who are humming along at a comfortable rhythm with hybrid work might have watched with worry recent developments of major firms insisting on five days in office a week by default. After all, it seemed like an equilibrium was reached in the years following the Covid-19 pandemic of working remotely for at least part of the week. Moreover, this comes after Singapore has issued landmark guidelines that make putting in place a process to fairly evaluate flexi-work arrangement requests compulsory. To piece together what to make of this mixed outlook, ST correspondent Tay Hong Yi speaks with his guest, a two-decade corporate veteran who now works with industry players to put in place progressive workplace practices. His guest is: Mr Aslam Sardar, chief executive of the Institute for Human Resource Professionals Highlights (click/tap above): 2:20 What is driving some employers to get workers back in the office so often? 5:11 Flexi-work arrangements are still more prevalent than before 7:57 Is there a chance of a “domino effect” of firms issuing office return mandates, one after the other? 15:31 How are employers here weighing up their options for office returns? 21:07 What to do if your employer asks you to return to the office more often Read about recent moves to make flexi-work more pervasive here: https://str.sg/tgoM Read Tay Hong Yi's articles: https://str.sg/w6cz Follow Tay Hong Yi on LinkedIn: https://str.sg/AAxy Host: Tay Hong Yi (hytay@sph.com.sg) Produced & edited by: Amirul Karim Executive producers: Ernest Luis, Lynda Hong & Joanna Seow Follow Headstart On Record Podcast channel here: Channel: https://str.sg/wB2m Apple Podcasts: https://str.sg/wuN3 Spotify: https://str.sg/wBr9 Feedback to: podcast@sph.com.sg Get business/career tips in ST's Headstart newsletter: https://str.sg/headstart-nl --- Follow more podcast channels: All-in-one ST Podcasts channel: https://str.sg/wvz7 ST Podcast website: http://str.sg/stpodcasts ST Podcasts YouTube: https://str.sg/4Vwsa --- Get The Straits Times' app, which has a dedicated podcast player section: The App Store: https://str.sg/icyB Google Play: https://str.sg/icyX --- #headstartSee omnystudio.com/listener for privacy information.

On this episode of Nailing the Apex, the current situation at Red Bull (00:00), the Flexi-wing debate (15:00), Tim in the sim at Saudi Arabia (16:30), Lando vs Oscar (30:00), Alpine's potential (40:00), Ferrari's race pace and strategy (50:00), Follow Tim Hauraney on Twitter / X: @TimHauraney Follow Adam Wylde on Twitter / X: @AdamWylde Visit https://sdpn.ca for merch and more. Follow us on Twitter (X): @sdpnsports Follow us on Instagram: @sdpnsports For general inquiries email: info@sdpn.ca Learn more about your ad choices. Visit megaphone.fm/adchoices

In this season, Mich Bondesio is talking to change makers creating impact both inside and outside of traditional sustainability sectors about effective ways to build more regenerative work practices and doing business that supports people, planet, and profit.In episode 78 of the Creating Cadence Podcast we cover:[00:01:22] News & Updates[00:02:03] How I became a Magic Mind Ambassador[00:04:55] Vedic Meditation[00:06:46] B Corp Fest[00:07:36] Introduction To Flexible Working[00:08:23] Part 1 - Why Flex Matters[00:09:29] Part 2 - Flexible Working Options[00:11:44] Part 3 - The Human Benefits of Flex[00:14:10] Part 4 - The Challenges[00:17:22] Part 5 - Season 13 GuestsFull transcript and show note links can be found at: https://creatingcadence.co/ep78-why-flexi-working-matters/MAGIC MIND Mental Performance Shot Offer - Get 20% discount on a one time purchase or up to 48% off for subscriptions with my code: CADENCEGet your Magic Mind here : https://www.magicmind.com/CADENCE #sustainability #environment #triplebottomline #creatingcadencepodcast #regenerativeleadership #sustainablebusiness #intentionalproductivity #socialimpact #consciousbusiness #bcorp #purposedrivenbusiness #regenerativepractices #attunement #sustainablebusiness #magicmind #mentalperformance Hosted on Acast. See acast.com/privacy for more information.

In this week's episode of You Have My Interest, we're diving into all things deposits – a term that's often misunderstood in the property world.Evelyn unpacks the key differences between your deposit (the upfront payment when signing a contract) and your overall contribution (your full financial input into the purchase). She also clears up some common confusion caused by marketing lingo and lender terminology around percentages.In the second half of the episode, Evelyn is joined by Mitch Perry from Deposit Assure to talk all about deposit bonds – what they are, how they work, and when they might be a smart alternative to a cash deposit. They also touch on how Deposit Assure's Flexi option works, the QBE backing, and how these bonds can support buyers navigating tricky timing or auction purchases.This is an episode you won't want to miss if you're looking to demystify deposit bonds and make smarter property decisions.Keen to learn more or get in touch with Mitch at Deposit Assure? See details below!Website: www.depositassure.com.auEmail: mitch@depositassure.com.auFacebook: https://www.facebook.com/depositassure/Find out your next step in property finance:You Have My Interest is brought to you by Everlend, a mortgage and finance broking firm built for the purpose of educating and empowering you to make informed financial decisions tailored to your wealth goals. Find out more and book in your free initial consultation at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.everlend.com.au/⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠Get in touch:Find out more about You Have My Interest at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠everlend.com.au/podcast⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠ and connect with us at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠podcast@everlend.com.au⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠You Have My Interest provides information and educational content relating to mortgages, finance and property. You Have My Interest's content is general in nature and does not take into account the individual financial, legal or tax needs or objectives of its audience members.It is not intended as a substitute for professional advice. Listeners should seek out a licensed professional to discuss their individual financial, legal and tax requirements.If you need mortgage or finance advice tailored to your own personal situation, contact ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠Everlend⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠ today for a free consultation. Everlend are authorised credit representatives of Loan Market Pty Ltd, Australian Credit Licence number 390222Podcast produced with ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠Apiro. ⁠

Recorded: - 9th April 2025This week, Cal and Dan talk about...The Nintendo Switch 2 reveal, and the price points...Daredevil: Born again...and MORE!

Recorded: - 27th March 2025This week, Cal and Dan talk about...The Last Nintendo Direct for The Switch 1...Daredevil: Born again...and MORE!

As Manchester City prepare to face Bournemouth in the FA Cup quarter-final, Luke Walters and Joe Bray are back to tackle the biggest issue facing fans right now. £750+ season ticket prices. Is the club pricing out its most loyal supporters? Are tourists being prioritised over locals? With the Viagogo deal and cost-of-living pressures, City fans are voicing frustration louder than ever.

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Flexi Pangolin By FilliFuu https://makerworld.com/en/models/1090887-flexi-pangolin Bambu X1C Brown Pink Black PLA 8hr 24mins X:173 Y:165 Z:36mm .2mm layer / .4mm Nozzle 6% Infill / 1mm Retraction 200C / 60C 99g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

Recorded: - 27th March 2025This week, Cal and Dan talk about...Daredevil: Born Again...Invincible Season 3...Captain America: Brave New World...Thunderbolts*...and MORE!

Ian Cheeseman was the BBC's Manchester City correspondent for nearly 25 years and has been a fan all of his life. Here he hosts his weekly podcast, Forever Blue, where all things Man City are discussed. Sponsored by Counting King, experts in business finance. Ian is joined by representatives of Man City fan groups to discuss season tickets, pricing, atmosphere, fan representative strikes and lots more. To buy a "It's Great to be a Blue" TShirt go via this linkbuytickets.at/itsgreattobeablue/storeIf you'd like to support Ian's work you can message him by DM on twitter @iancheeseman

It's that time again already! The LB trio preview the Chinese GP, breaking down which teams have the best chance of dethroning McLaren, the potential impact of the FIA's flexi-wing clampdown, and the mixed up midfield. They wrap up with Domenicali's contract extension as F1 CEO, and a game of Higher or Lower... FOLLOW us on socials! You can find us on YouTube, Instagram, X (Twitter) and TikTok SUPPORT our Patreon for bonus episodes JOIN our Discord community JOIN our F1 Fantasy League EMAIL us at podcast@latebraking.co.uk   & SUBSCRIBE to our podcast! Learn more about your ad choices. Visit podcastchoices.com/adchoices

It's that time again already! The LB trio preview the Chinese GP, breaking down which teams have the best chance of dethroning McLaren, the potential impact of the FIA's flexi-wing clampdown, and the mixed up midfield. They wrap up with Domenicali's contract extension as F1 CEO, and a game of Higher or Lower... FOLLOW us on socials! You can find us on YouTube, Instagram, X (Twitter) and TikTok SUPPORT our Patreon for bonus episodes JOIN our Discord community JOIN our F1 Fantasy League EMAIL us at podcast@latebraking.co.uk   & SUBSCRIBE to our podcast! Learn more about your ad choices. Visit podcastchoices.com/adchoices

Recorded: - 7th March 2025This week, Cal and Dan talk about...Daredevil: Born Again, Marvel Television's all-new series #DaredevilBornAgain showing only on ‪@disneyplus‬Stuff we talked about▶ Daredevil: Born Again | Final Trailer https://tinyurl.com/mr3reh73

1. aktuální novinkynovela zákona o dětské skupině a novela energetického zákonaflexi novela zákoníku prácejednotné měsíční hlášení zaměstnavatelenovelizace směrnice o DPH směrnicí ViDA - např. zrušení režimu call od stock skladů2. podávání přehledů OSVČ (od 7.56 min)přehled o příjmech a výdajích pro účely pojistného na důchodové pojištěnípřehled o vyměřovacím základů pro pojistné na zdravotní pojištěnívztah ke lhůtě pro podání daňového přiznání

We hit the big news stories in Formula 1 and delve into the stories of pre-season testing with the help of Kimi Raikkonen's former race engineer Julien Simon-Chautemps in the latest edition of The Race F1 Podcast.  Along with Jon Noble and host Edd Straw, Simon-Chautemps sheds light on the successful legal bid mounted by Ferrari to prevent Enrico Cardile starting work for Aston Martin before July, and the latest in a long-line of flexi wing controversies.  We then look back at pre-season testing, which includes Simon-Chautemps running through long-run pace analysis produced by motorsport software, data and technology company Paceteq and shedding light on how teams approach analysing and improving their own performance - and that of rivals.  He also explains what teams do between testing and the first race of the season in a bid to implement the lessons learned. And finally, we discuss the latest FIA controversy with Motor Sport UK's David Richards launching a public critique of president Mohammed Ben Sulayem. SPECIAL OFFER: Get 90% off your first month when you join The Race Members' Club on Patreon today - we even have an F1-only tier! Head to Patreon.com/therace An edit of our London live show is available to purchase here (free for Champions tier members): https://www.patreon.com/posts/live-show-race-121105739 Follow The Race on Instagram, X and Facebook Check out our latest videos on YouTube Learn more about your ad choices. Visit megaphone.fm/adchoices

We hit the big news stories in Formula 1 and delve into the stories of pre-season testing with the help of Kimi Raikkonen's former race engineer Julien Simon-Chautemps in the latest edition of The Race F1 Podcast. Along with Jon Noble and host Edd Straw, Simon-Chautemps sheds light on the successful legal bid mounted by Ferrari to prevent Enrico Cardile starting work for Aston Martin before July, and the latest in a long-line of flexi wing controversies. We then look back at pre-season testing, which includes Simon-Chautemps running through long-run pace analysis produced by motorsport software, data and technology company Paceteq and shedding light on how teams approach analysing and improving their own performance - and that of rivals. He also explains what teams do between testing and the first race of the season in a bid to implement the lessons learned.And finally, we discuss the latest FIA controversy with Motor Sport UK's David Richards launching a public critique of president Mohammed Ben Sulayem.SPECIAL OFFER: Get 90% off your first month when you join The Race Members' Club on Patreon today - we even have an F1-only tier! Head to Patreon.com/therace An edit of our London live show is available to purchase here (free for Champions tier members): https://www.patreon.com/posts/live-show-race-121105739Follow The Race on Instagram, X and FacebookCheck out our latest videos on YouTube Hosted on Acast. See acast.com/privacy for more information.

De FIA gaat vanaf de Grand Prix van Spanje extra controles uitvoeren op flexibele onderdelen. Hoewel niet elk team daar blij mee is, heeft de FIA daar naar eigen zeggen een hele logische verklaring voor. In deze GPFans Special duiken we in de flexi-wing-saga, die nog altijd voortduurt.

The FIA will conduct additional checks on flexible parts starting from the Spanish Grand Prix. Although not every team is happy about this, the FIA claims to have a very logical explanation for it. In this GPFans Special, we dive into the flexi-wing saga, which is still ongoing.

Recorded: - 26th February 2025This week, Cal and Dan talk about...taking the Podcast Personality Quiz...Andor Season 2...Daredevil Born Again...Stand Alone Punisher Special....plus more!Stuff we talked about▶ Andor | Season 2 Trailer https://tinyurl.com/mrxs8ztx▶ Daredevil: Born Again | Final Trailer https://tinyurl.com/mr3reh73

Hablamos con Evaristo Sánchez de Flexión Teatro para hablar del Torneo de Dramaturgia. Un torneo en el que cuatro dramaturgos escriben un texto de 35 minutos para ser interpretado por dos actores. Ninguno de ellos conoce quien ha escrito el texto, ni quien va a interpretarlo. Las condiciones son que ninguno de los actores necesita ningún elemento escénico, sólo se les proporciona un atril y una silla a cada uno y dos horas antes de comenzar el autor se reúne con ellos para trabajar y hacer una lectura dramatizada. A partir de ahí suben a un pequeño rin donde comienza el combate. Finalmente será el público el que con su papeleta que deposita en una urna decide cual es el texto ganador. El premio será una pluma de vidrio.

On The BIG Show Angel shared about the recent news from The Straits Times about the Flexible Work for Teachers and Glenn shared about the recent fire in Punggol. Read more here - Flexible Work For Teachers: https://www.straitstimes.com/singapore/flexi-work-for-spore-teachers-considering-their-needs-for-different-seasons-of-life Fire in Punggol: https://www.straitstimes.com/singapore/50-evacuated-after-fire-breaks-out-in-punggol-flat See omnystudio.com/listener for privacy information.

We look at the Flexi Spot Standing Desk With Brushless Motors(E9), see more about the product here. Flexi Spot Standing Desk With Brushless Motors(E9) reviewed The desk base and surface top come in to different packages. Both of these have a serious heft to them. If your postman does not collapse then you are good to go with the assembly process. This particular model is one of their top of the range products, and it does offer a feeling of stability and ideally, longevity too. The fact that the company is also selling the desk with a twenty year warranty further suggests that they are confident about it's durability and long life time too. This is a good thing too, because, while our testers went up and down numerous times with the controls, adjusting the height level of the desk top, it is of course impossible replicate twenty years of repetitious usage. That said, apart from your standing up moments, you would imagine that, for the most part it will be more often used in one, favoured setting. With this caveat in mind our testers were positive and enjoyed the user experience for this desk. Welcome to FlexiSpot's Mega Factory! More about the standing desk Exceptional Stability Enhanced Columns with Semi-T Leg Structure With a thickened semi-circular joint at the column, E9's T-shaped base enhances the desk's stability. Thickest Column LegMade from high-quality carbon steel, it is the latest column design among market standing desks, measuring 95.6mm, 26mm thicker than average. Well-designed Leg Structure Compared to inverted structure, unmatched stability can be delivered with upright three-stage leg design. Superior Sturdiness Steady when movingThe liquid in the water glass stays smooth as E9 moves. Sturdy at the highest levelAs the E9 rose to its maximum altitude, all angles of push remain sturdy. Stable under higher loadsE9 can withstand push-ups performed by adult men. Strong Load-bearing Capacity and Durability Smooth TransitionsThe dual-motor system runs more smoothly with brushless motor technology, reducing vibration due to the lack of brushes and commutators. Ultra-long service lifeBrushless motors extend E9's service life to 71 years*, allowing it to be used from youth to old age, namely three generations. 180kg Weight BearingWith a dynamic weight capacity of up to 180kg, the E9 can support multiple heavy equipment, while most desks can only handle 125kg. *Based on third-party testing under a light load of 30kg, simulating over 260,000 height adjustments (calculated at 10 adjustments per day, 365 days/year). Actual lifespan may vary with load and usage conditions. Intelligent Operation Smart TouchscreenInnovative touchscreen design for easy height adjustment. Ideal Memory Function4 Preset heights for personalized sitting and standing positions. Child LockSafety child lock design prevents accidental operation and gives your family peace of mind. USB Charging PortConvenient USB charging port provides easy access to power, ensuring efficient work and life. Tidy Workstation Magnetic Fabric Cable Cover The desk also comes with a magnetic fabric cable cover to keep your workspace looking spick and span. Visually organized and attractive Friendly to family with furry friends See more product reviews here.

We dissect Formula 1's latest flexi-wings row in the latest edition of The Race F1 Podcast. Following news of a technical directive being issued curbing front wing flexibility, Jon Noble and Mark Hughes join Edd Straw to explain what's changing and why. Inevitably, there's the question of which teams this could help and hinder to consider, as well as the political dimension as the usual competitive paranoia bubbles up among the ultra-competitive teams. We also explain why flexi-wings can't be regulated out of F1, and the reasons for the eternal push-and-pull battle between the rulemakers and teams on what's permitted. And with the rule change kicking in after eight races, we ask whether it could distort the season and lead to a competitive swing in June.Want extra podcast content and to ask questions on the show? Join The Race Members' Club on Patreon - we even have an F1-only tier! Head to Patreon.com/therace An edit of our London live show is available to purchase here (free for Champions tier members): https://www.patreon.com/posts/live-show-race-121105739Follow The Race on Instagram, X and FacebookCheck out our latest videos on YouTubeDownload our app on iOS or Android Hosted on Acast. See acast.com/privacy for more information.

We dissect Formula 1's latest flexi-wings row in the latest edition of The Race F1 Podcast. Following news of a technical directive being issued curbing front wing flexibility, Jon Noble and Mark Hughes join Edd Straw to explain what's changing and why.  Inevitably, there's the question of which teams this could help and hinder to consider, as well as the political dimension as the usual competitive paranoia bubbles up among the ultra-competitive teams.  We also explain why flexi-wings can't be regulated out of F1, and the reasons for the eternal push-and-pull battle between the rulemakers and teams on what's permitted.  And with the rule change kicking in after eight races, we ask whether it could distort the season and lead to a competitive swing in June. Want extra podcast content and to ask questions on the show? Join The Race Members' Club on Patreon - we even have an F1-only tier! Head to Patreon.com/therace An edit of our London live show is available to purchase here (free for Champions tier members): https://www.patreon.com/posts/live-show-race-121105739 Follow The Race on Instagram, X and Facebook Check out our latest videos on YouTube Download our app on iOS or Android Learn more about your ad choices. Visit megaphone.fm/adchoices

Graham and Luke return as the F1 offseason marches, painfully, on, alas! This week, we talk: FIA's flexi-wing clampdown: the major battlefield of 2025 and the massive change which could impact the 2025 season (4:45) Adrian Newey's comments on 2026 regs (43:44) Herbert removed as steward; the growing tide calling for permanent F1 stewards (53:50) Australian Grand Prix corner tweaks for 2025 (56:56) Three vying South African GP bids (64:24) Ford joining Hypercar for 2027; McLaren likely to follow, other endurance (67:03) Dino Beganovic and Ferrari, and Formula Regional chatter (73:20) Has Yuki Tsunoda shafted his options for 2026? (82:34)

Craig Petrie, Principal East Glendalough School and Kevin Shortall, Principal of St. Aidan's Community School, Tallaght

Hello! We just couldn't keep away, and having recently passed our first 100,000 listens, we thought we would say thank you and Happy Christmas with this special episode looking at the first 4 years of Beatles fan club Christmas flexi discs! We recorded the in person on a handheld recorder, so apologies if not up the usual audio quality. We hope you all have a lovely festive period and new year, and we will see you in 2025! If you want to view the chart up to the latest episode, you can do so⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠ here! ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠ Below are links to our respective music projects! ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠Smiles On Lonely Souls | Garry Abbott (bandcamp.com)⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠ ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://goodgriefliverpool.bandcamp.com/⁠⁠⁠⁠⁠⁠⁠

This week @adafruit we're taking a look at the Motorized POV LED Display. Prototyping a new case for the Raspberry Pi Touch Display V2. 3D printing a jig for CNC wood project.Quick look at a new SLA case for the BQ25185 solar charter. New 3D models added to our GitHub repo. Timelapse this week features a multicolor snowman! Motor POV Guide https://learn.adafruit.com/motorized-pov-led-display/ Feather RP2040 https://www.adafruit.com/product/4884 Motor FeatherWing https://www.adafruit.com/product/2927 FeatherWing Doubler https://www.adafruit.com/product/2890 DotStar LEDs https://www.adafruit.com/product/2328 TT Motor https://www.adafruit.com/product/3777 Slip Ring https://www.adafruit.com/product/736 Timelapse Tuesday Flexi Snowman By Zentangle99 thingiverse.com/thing:6856071 https://youtu.be/0KnIZAVp8pc Community Makes https://www.printables.com/model/864293-gravity-falls-memory-gun/comments/2245425 https://www.printables.com/model/723974-snow-bird-mold/comments/2244482 https://www.printables.com/model/7260-raspberry-pi-zero-stand/comments/2239044 https://www.printables.com/model/7271-heat-set-insert-press/comments/2235232 https://www.printables.com/model/7271-heat-set-insert-press/comments/2232454

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Flexi Snowman By Zentangle99 thingiverse.com/thing:6856071 Bambu X1C Red Black White Gold PLA 15hr 35mins X:69 Y:100 Z:48mm .2mm layer / .4mm Nozzle 6% Infill / 1mm Retraction 200C / 60C 34g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting -----------------------------------------

e492 with Michael & Michael — #holiday desktop #decorations, #AR, #ImmersiveVideo in sports, user experience and interaction and a whole lot more!

AVERMEDIA FLEXI GO , LE TEST par Yohann LemoreÀ savoir► Matière: Aluminium► Prix: 99€► Rotation Horizontale Max : 360 degrés► Rotation Verticale Max : Bras inférieur : 180 degrés / Bras supérieur : 360 degrés► Poids Max Supporté : 1,5 kg► Montage sur Bureau : Étrier en C (jusqu'à 55 mm)► Filets de Montage Supportés : 1/4”, 5/8”► Dimensions (L x P x H) : 680 x 85 x 60 mm► Poids: Bras : 431,1 g / Étrier en C : 533,8 g

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Pumpkin Cat By 3D_FlexSeeds https://www.thingiverse.com/thing:6769725 CR10S SmartPro Green Purple PLA 05hr 36mins X:241 Y:183 Z:16mm .2mm layer / .4mm Nozzle 6% Infill / 1mm Retraction 200C / 60C 14g 60mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting -----------------------------------------

Ian Cheeseman was the BBC's Manchester City correspondent for nearly 25 years and has been a fan all of his life. Here he hosts his weekly podcast, Forever Blue, where all things Man City are discussed. Sponsored by Counting King, experts in business finance. Ian is joined by City fans representing the 1894 fan atmosphere group, mcfc foodbank, Solid Citizens and City Matters to discuss off field concerts that affect all match going fans. To buy a "It's Great to be a Blue" TShirt go via this linkbuytickets.at/itsgreattobeablue/storeIf you'd like to support Ian's work you can message him by DM on twitter @iancheeseman

New qualitative and quantitative tools are being developed to measure and track changes in proteins relevant for neurodegenerative disease, and these tools have the potential to accelerate drug discovery and clinical trials. In this episode, Dr. Judith Steen discusses her work creating novel qualitative and quantitative tools and workflows at the interface of proteomics and transcriptomics, including their novel FLEXI platform. This platform uses targeted, high- throughput quantitative mass spectrometry to isolate, quantify, and identify molecular changes in proteins. She describes her ongoing project, funded by The Michael J. Fox Foundation, to develop FLEXISyn, which aims to track post-translational changes in alpha-synuclein to better understand how the protein becomes dysfunctional and begins misfolding and forming toxic aggregations in Parkinson's disease. Judith is Associate Professor of Neurology at Harvard Medical School, a member of the Harvard Stem Cell Institute, and Director of the Neuroproteomics Laboratory in the F.M. Kirby Neurobiology Center at Boston Children's Hospital.This podcast is geared toward researchers and clinicians. If you live with Parkinson's or have a friend or family member with PD, listen to The Michael J. Fox Foundation Parkinson's Podcast. Hear from scientists, doctors and people with Parkinson's on different aspects of life with the disease as well as research toward treatment breakthroughs at https://www.michaeljfox.org/podcasts.

New qualitative and quantitative tools are being developed to measure and track changes in proteins relevant for neurodegenerative disease, and these tools have the potential to accelerate drug discovery and clinical trials. In this episode, Dr. Judith Steen discusses her work creating novel qualitative and quantitative tools and workflows at the interface of proteomics and transcriptomics, including their novel FLEXI platform. This platform uses targeted, high- throughput quantitative mass spectrometry to isolate, quantify, and identify molecular changes in proteins. She describes her ongoing project, funded by The Michael J. Fox Foundation, to develop FLEXISyn, which aims to track post-translational changes in alpha-synuclein to better understand how the protein becomes dysfunctional and begins misfolding and forming toxic aggregations in Parkinson's disease. Judith is Associate Professor of Neurology at Harvard Medical School, a member of the Harvard Stem Cell Institute, and Director of the Neuroproteomics Laboratory in the F.M. Kirby Neurobiology Center at Boston Children's Hospital.This podcast is geared toward researchers and clinicians. If you live with Parkinson's or have a friend or family member with PD, listen to The Michael J. Fox Foundation Parkinson's Podcast. Hear from scientists, doctors and people with Parkinson's on different aspects of life with the disease as well as research toward treatment breakthroughs at https://www.michaeljfox.org/podcasts.

Saludos Corillo! Esta semana Maricelys nos habla sobre los alerones flexibles y lo ocurrido en el Gran Premio de Monza. Sigan a Maricelys como @maricelysf1 --- Support this podcast: https://podcasters.spotify.com/pod/show/prracingsports/support

On this episode of the pod, host Edd Straw and former F1 technical director Gary Anderson dig into two of the big technical talking points from the Italian Grand Prix in Monza: Red Bull's sharp decline in form, and fresh concerns - from Red Bull and Ferrari - about the flexibility of the front wing used by Formula 1 pacesetter McLaren. After those discussions, Gary tackles another batch of questions from listeners, including ones on Red Bull spec reversion, adjustable aero and Mercedes' anti dive experiments. Got a tech question? Drop Edd and Gary a question via podcasts@the-race.com Want extra podcast content? Join The Race Members' Club on Patreon! Head to Patreon.com/therace Follow The Race on Instagram, Twitter and Facebook Check out our latest videos on YouTube Download our app on iOS or Android Learn more about your ad choices. Visit megaphone.fm/adchoices

On this episode of the pod, host Edd Straw and former F1 technical director Gary Anderson dig into two of the big technical talking points from the Italian Grand Prix in Monza: Red Bull's sharp decline in form, and fresh concerns - from Red Bull and Ferrari - about the flexibility of the front wing used by Formula 1 pacesetter McLaren.After those discussions, Gary tackles another batch of questions from listeners, including ones on Red Bull spec reversion, adjustable aero and Mercedes' anti dive experiments.Got a tech question? Drop Edd and Gary a question via podcasts@the-race.comWant extra podcast content? Join The Race Members' Club on Patreon! Head to Patreon.com/theraceFollow The Race on Instagram, Twitter and FacebookCheck out our latest videos on YouTubeDownload our app on iOS or Android Hosted on Acast. See acast.com/privacy for more information.

This episode Sara & Sophie tackle some controversial topics and give their opinions

Putting the dog back on lead is a fundamental skill that can significantly enhance training and repair various behavioural issues. Experts in the field emphasise the importance of this practice for both novice and experienced dog owners. They believe that putting the dog back on lead helps reinforce obedience, control, and trust between the handler and the dog. This practice can correct behaviours such as pulling, lunging, and ignoring commands. When a dog is back on lead, it must focus on the handler, which strengthens the dog's response to commands. This consistent practice helps dogs understand their boundaries and the expectations set by their owners. Additionally, putting the dog back on lead can be a confidence booster for both the dog and the owner. It provides a structured environment where the dog can relearn and practice essential skills, making it easier to address and correct unwanted behaviours. The lead acts as a communication tool, guiding the dog and reinforcing positive behaviour. Incorporating this practice into daily training routines ensures that dogs remain well-behaved and responsive. The simple act of putting the dog back on lead is a powerful method to enhance skills, repair training issues, and foster a stronger bond between the dog and the owner. We mentioned Flexi leads in this episode and Jay Jack spoke about this in an older episode you can find here Further details looking for great dog trainers and supporters of the canine paradigm? Below is a vast array of people and business's who stand by us, donate to our running costs and do great things for the canine community. Glenn runs and has almost everything canine related at, Canine Evolution or Pet Resorts Australia Pat has a full range of coaching and dog training services at Operant Canine You can support our show and get extra content right here on our Patreon page. Everything goes into keeping the show running and we love all the wonderful people who are part of that community. If you're not sure how, just ask us. You can get our full range of our Merch at our Teespring store here You can help us by spreading the word amongst the canine community or even suggesting a special guest to interview. If you need to find out how to listen to our podcast, go here We have a YOUTUBE channel that you can subscribe to now If you enjoyed the podcast, please review us on Itunes, spotify and any other podcast directory Details on joining the IACP can be found here. If you're not in it you should be! Check out Dogs Playing for Life! A rescue process changing dogs lives across the USA Support our supporters Narelle Cooke's raw feeding guide for dogs here. Narelle has her own podcast on all podcast directories called Natural Health for people and pets. Check it out in person. Looking for the best, human grade supplement range for your dogs? Check out Canine Ceuticals. Now available in the USA. SHOW SPONSOR Jason Firmin Einzweck Dog quip SHOW SPONSOR The motorcycle dog kennel by Rowdy Hound SHOW SPONSOR Daycare and training from the heart dog training SHOW SPONSOR Our beloved friend and regular contributor, Birdy O'Sheedy can be found at birdyosheedy.com HUGE thanks to all our contributing artists. Please support their works Jane StuartAvery KellerZoie Neidy

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Crate with Flexi Legs By Audi https://www.printables.com/model/862547-milk-crate-with-flexi-legs CR10S Pro V2 Purple PLA 4hr 55mins X:259 Y:184 Z:57mm .2mm layer / .4mm Nozzle 6% Infill / 1mm Retraction 200C / 60C 27g 60mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Bartlebeats https://soundcloud.com/adafruit -----------------------------------------

Edtech ThrowdownEpisode 160: 7 Awesome AI-Powered EdTech ToolsWelcome to the EdTech Throwdown This is episode 160 called “7 Awesome AI-Powered EdTech Tools”. In this episode, we'll update everyone on where we are at in our 2024 edtech march madness bracket and examine 7 awesome AI powered edtech tools! This is another episode you don't want to miss, check it out!Segment 1: Narrative: #edtechmadness24Okay hold on to your socks because they are about to be knocked off by the AI tool selection we've got coming up. We need to take a break to hear from Teach Better, but don't go anywhere because when we come back we're going to break down this year's edtech march madness bracket. Segment 2: 7 Awesome AI-Powered EdTech ToolsFactors.worldAI powered survey and worksheet for K-12 classrooms.Learnt.ai With Learnt.ai you can save time and effort by automating the creation of high-quality lesson plans, learning objectives, assessment questions, and a range of other resources.Try Learnt AI for FreeClass CompanionClass Companion empowers teachers to give instant feedback and support each student to learn at their own pace. Thousands of teachers use the AI platform to create assignments, engage students, generate feedback, and gain insights into progress.Lumen5Lumen5 is a video creation platform powered by AI that enables anyone without training or experience to easily create engaging video content within minutes.Recommendation Sarah Greck @sgrackock12.orgElevate your learning journey with Flexi - your FREE AI Tutor for Science & Math. Improve your grades with tailored practice, bite-sized learning,Recommendation Patrick Hausammann @PHausEDUGammaA New Medium for Presenting Ideas Powered by AI. Gamma is a new platform that allows users to create polished documents, presentations, and webpages in seconds using AI.Ethiqly “Sneak Peak”Ethiqly is a digital writing hub for teachers and students to shareFor...