Podcasts about 3D printing

Link Up w/The Morning Sickness Digitally All Over:Instagram: @hms_98_official, @bosskupd, @bretvesely, @dickToledoX/Twitter: @HMSon98, @DickToledo, @bretveselyFacebook: @HMSKUPDYouTube: @hmspodcast9320, @98kupdRequest/Call in/Wakeup Song line:(IN AZ) 602.585.9800More HMS: holmbergpodcast.com, 98kupd.comEmail: dtoledo@98kupd.com, bvesely@98kupd.com, bbogen@98kupd.comSee Privacy Policy at https://art19.com/privacy and California Privacy Notice at https://art19.com/privacy#do-not-sell-my-info.

Link Up w/The Morning Sickness Digitally All Over:Instagram: @hms_98_official, @bosskupd, @bretvesely, @dickToledoX/Twitter: @HMSon98, @DickToledo, @bretveselyFacebook: @HMSKUPDYouTube: @hmspodcast9320, @98kupdRequest/Call in/Wakeup Song line:(IN AZ) 602.585.9800More HMS: holmbergpodcast.com, 98kupd.comEmail: dtoledo@98kupd.com, bvesely@98kupd.com, bbogen@98kupd.comSee Privacy Policy at https://art19.com/privacy and California Privacy Notice at https://art19.com/privacy#do-not-sell-my-info.

For transcriptions and more detailed shownotes, please go to: https://swordschool.shop/blogs/podcast/episode-218-physics-rainbows-and-3d-printing-with-stephan-eickelmann  To support the show, come join the Patrons at  https://www.patreon.com/theswordguy Dr Stephan Eickelmann is the founder, president and head instructor of Schildwache Potsdam and a key organiser behind events such as Swords of the Renaissance (where you'll find Guy every year) and the International Torneo di Spada League. Alongside Stephan's work in historical martial arts, he is a physicist with a PhD in experimental soft matter and interface physics, and a university researcher and teacher. Stefan discovered historical martial arts during his PhD, and was drawn to its flat hierarchies, research driven mindset and emphasis on shared inquiry. His approach to teaching focuses on enabling independent thinking rather than transmitting authority. He is also involved in equipment design, open source safety development and building inclusive, responsibility driven club and event cultures. We chat about how historical fencing is where teaching, making, research, safety and community all come together. Our conversation also touches on the challenges of balancing traditional martial arts practices with modern safety and inclusivity. We discuss the impact of how small gestures, like painting nails and club t-shirts, create a more relaxed and inclusive environment in class.

Cobra is the premiere leader in 3D printed Golf Clubs, but why is no one else doing it? Is 3D printing Truly the future of Golf? Ryan Roach chats with Tony and Chris to get the ins and outs of Cobra's 3D printing mentality and their 3D printed irons. 00:00 Welcome back 04:44 What is 3D printing? 07:33 How 3D printing is used 10:38 Why 3D printing? 24:51The Future of 3D printing

Printing things Analogy to Media Content, Bambu's Breakout Year 

ASME Techcast talks with Boeing's Melissa Orme aboutsmart manufacturing, additive manufacturing, and the role of Women in 3D Printing.

“If you plan, the cases can go much more smoothly. And if you have patient-specific instrumentation, they can go much more quickly” says restor3D’s CEO Kurt Jacobus in this episode of Vanguards of Healthcare. He sat down with BI analyst Matt Henriksson to elaborate on personalized orthopedic implants, outlining how the win then for the surgeon is the capacity to complete more cases, with better patient outcomes reputationally, and the win for the facility is getting another case into the operating room. The in-depth interview covered restor3D’s AI planning and 3D printing capabilities, its path in integrating the Conformis acquisition to allow it to compete against larger companies in the knee-replacement market and the upcoming launch of its patient app. He also discussed how his drive to use technology to solve problems led him from the consulting world to leading medtech companies. Listen to this episode on Apple Podcasts and Spotify. See omnystudio.com/listener for privacy information.

Show DescriptionDave's upgrading his office with a 3D printer, Chris is ordering 3D printed parts for his van, using mobile Starlink, Chris redesigned his website, playing puzzle games like Statedoku, Chess Peace, and Clues by Sam, how CodePen is going to support pointing domains at your app, and what Vite getting bought by Cloudflare signals. Listen on WebsiteWatch on YouTubeLinks Kagi - Reclaim the Web & Restore Your Privacy A week on the road The New Van – Chris Coyier Chris Coyier – Web craftsman, blogger, author, speaker. Social RSS (?) – Chris Coyier Statedoku — Daily US States Puzzle | Sudoku Meets American Geography Chess Peace - A Peaceful Chess Puzzle Game for iPhone, iPad & Mac Clues By Sam Online Courses • Josh W. Comeau JavaScript for Everyone - Piccalilli SponsorsMacroMacro is a tool to cut through the noise - It's a workspace built for engineers; One place for all your emails, tasks, team chat, and documents. Sign up at Macro.com and get $100 of your subscriptions using code SHOPTALK100

​ @Creality3D  and  @BambuLab  have been BUSY this past week!! From Klitek (a clear  @bondtechab  INDX clone), Falcon T1 (a 5in1 laser), Falcon A1C (is it diabetic??), and even the Bambu A2L leaking to us from multiple distributors! So much to talk about this week!Want edited versions of these shows? Check out  @makingawesome  for edited down shows and clips as well! A HUGE Thank you to the Filament Sponsors of these streams,  @printedsolid  and  @3dprima481 ! Check them out: https://printedsolid.comhttps://3dprima.com Use "MakingAwesome" for 20% off on all PrimaCreator and Copymaster3D materials until April 30th 2026Want to get some of the UK's fastest, and the first REAL Bamboo printer out there or the newly launched ALLCLEAN, the first dedicated 3D printer bed cleaner? Check out  @construct3d  https://b.link/Construct3DUse the discount code : "makingawesome" for 15% off.Need HIGH END 3D Scanning ANYWHERE in the world?? Check out  @3DMusketeers !! Utilizing over $250k in scanners, projects both big and small they can easily handle! Fully portable, able to bring the gear to you, 3D Musketeers is your one stop shop for all things Physical to Digital and even Digital to Physical. Full Service Art To Part rapid prototyping, product development, and of course, 3D Printing with 3D Musketeers! https://b.link/3DM__________________________________Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com/podcast and someone will get you set up to be a guest!

Devin Crow talks about anime, videogames and more, including the movie "The Gangster The Cop The Devil,"  and some anime. Plus, beer of the week: Bero.

Send us Fan MailWelcome to Guilders-Ford Radio, a Necromunda podcast broadcasting from the East Gate Docks of Hive Primus (via Guildford Games Club, Surrey, UK).Episode 42 of Guilders-Ford Radio plays host to a reduced team, with Papa Nurgle taking up residency with Gaz, and Rosco lost in deepest darkest Cornwall... we've sent in the Ratskins, but even they can't find him!Dixie and Leigh are joined by Mike from Tempest Terrain to tell us about his amazing Sci-Fi Collection Kickstarter, and his Rapid Fire diceboxes that have proved a great success at Salute, Adepticon and across the Internet.  We get into the specifics of 3D Printing, and lots of ideas for Necromunda-style terrain ideas.If you like what you hear, Mike has very graciously provided a discount for GFR Listeners at the Tempest Terrain webstore - use code ‘GFR10' at checkout.Along with our usual hobby round up, Leigh and Dixie go through the numerous community events that are upcoming, and lament their consistent inability to get hold of tickets.We'd like to take the opportunity to thank all our listeners who have chosen to support us on Patreon & Buzzsprout - your contributions help us make a better show!• Flow • Denny Wright • Stefan Sahlin  • Matt Miler  • Matti Puh  • Nick McVett  •Warhammer in the Dark  •From_Somewhere • Alfonso  • The Traitor • Johnny DeVille • Stephan B • Jeff Nelson • Lankydiceroller • Morskul • Beau  • Justin Clark • Dr.Toe • Mikael Livas • Josh Reynolds • StandStab • ChestDrain • Scott Spieker • Tucker Steel • Shaughn • Stewart Young • Goatincoat  • Jason • Joseph Serrani • Billy  • Phil • Stephen Griffiths  • Søren D • Spruewhisperer • Kevin Fowler • Scott Spieker • Andy Tabor  • TheMichaelNimmo • Tucker Steel  • Dave Shearman  • Shaughn  • Stewart Young •Damien Davis • Wayne Jeffrey   •  Frawgenstein • Matthey Mulcahy   • William Payne •Thomas Laycock • Stephen Livingston • Tyler Anderson • McGobbo • Jed Tearle • Gene Archibald • James Marsden • John Haynes • Ryan Taylor • Yuki van Elzelingen  • Dick Linehan • Rhinoxrifter • Shawn Hall  • Eric McKenzie  • Paul Shaw  • Jenifer • Drew Williams  • Greg Miller • Andy Farrell  • Nate Combrink •  Don Johnson • Michael Yule • Joe Roberts • TheRedWolf • Lukasz Jainski • Aaron Vissers • One Punch Orlock (Tom) • Matt Price • ShnubutsSupport the showHelp us make better content, and download free community resources!www.patreon.com/guildersfordradioAny comments, questions or corrections? We'd love to hear from you! Join the Guilders-Ford Radio community over at;https://linktr.ee/guildersfordradiowww.instagram.com/guildersfordradiowww.facebook.com/guildersfordradioGuildersFordRadio@Gmail.com** Musical Attribution - Socket Rocker by (Freesound - BaDoink) **

The following article of the Aerospace industry is: “3D Printing and Design: A New Era for Mexico's Industry” by Ricardo Saenz, Business Development, Intelligy.

3D printing has evolved from being primarily used for prototyping to becoming a key manufacturing technology for high-volume production across a growing number of companies in the medical, aerospace, and aviation industries. For example, large parts of SpaceX's Raptor 3 engine are produced using 3D printing. Tekna Holding manufactures a titanium powder that serves as a feedstock material for industrial 3D printers. Today's guest on the Arctic Podcast is the company's CEO, Claude Jean.

Infill types for bottoms, Make your own Cells Bowl, BronzeFill, The problem with today's 3D Printers, Tinkerplay

Send us Fan MailSend us Fan MailSend a textJensen is once again missing, so four of the five of us are here for a fun, episode about, well... Star Wars. :)We recap some new 3D printing news, talk about getting back to the Posse roots via a Star Wars Group Build, recap the recent 2026 Rocky Mountain Expo in SLC, and discuss "Sleeper Builds." Did I mention we discuss Star Wars models?Remember to check out our YouTube page and our new regular video content at the Plastic Posse Podcast YouTube Page: https://www.youtube.com/channel/UCP7O9C8b-rQx8JvxFKfG-Kw If you would like to become a Posse Outrider, and make a recurring monthly donation of $ 1 and up, visit us at www.patreon.com/plasticpossepodcast .Plastic Posse Podcast on Facebook: https://www.facebook.com/PlasticPossePlastic Posse Group on Facebook: https://www.facebook.com/groups/302255047706269Plastic Posse Podcast MERCH! : https://plastic-posse-podcast.creator-spring.com/Plastic Posse Podcast on YouTube:https://www.youtube.com/channel/UCP7O9C8b-rQx8JvxFKfG-KwOrion Paintworks (TJ): https://www.facebook.com/orionpaintworksJB-Closet Modeler (JB): https://www.facebook.com/closetmodelerThree Tens' Modelworks (Jensen): https://www.facebook.com/ThreeTensModelWorksRocky Mountain Expo: https://rockymtnhobbyexpo.com/SPONSORS:Tankraft: https://tankraft.com/AK Interactive: https://ak-interactive.com/Tamiya USA: https://www.tamiyausa.com/Micro World Games: https://mwg-hobbies.com/Bases By Bill: https://basesbybill.com/?srsltid=AfmBOoojwgAlnXwsJcB_SlYzeclVt9ZuIX3Fd18Ig9k5f4vyIYmihobbSupport the showSupport the show

Hello voices from the bench community, John Wilson here and I wanted to share some news about the evolution of the Programill lineup. Most importantly, Ivoclar's new PrograMill 7. What stands out right away is the reduced air consumption this mill requires, but what you'll notice first is that impressive new touchscreen. For us, the biggest advantage has been increased spindle power. My laboratory's known for these larger cases with complex geometries, and I can tell you that extra power really makes a difference. Next time you see your Ivoclar representative, be sure to ask about the PrograMill 7 and tell them John Wilson sent you. Thank you. At exocad Insights in beautiful Mallorca, we finally caught up with Felix from Imagine USA—and the timing couldn't have been better. As an exocad dealer on the front lines of digital dentistry, Felix shared his excitement about the strong turnout, the familiar faces, and most importantly, the innovation coming from exocad. What stood out most? The new exocad Hub and its cloud-based capabilities, along with powerful AI-driven tools inside DentalDB designed for efficient batch processing. For Felix and the Imagine team, it's not just about seeing what's new—it's about putting it to the test. By running new features through their own production facility first, they ensure real-world performance before bringing solutions to their customers. Beyond the technology, Felix emphasized the value of being there in person—connecting face-to-face with partners, having meaningful conversations, and stepping back to see where the industry is headed. And of course, doing it all in Mallorca doesn't hurt either. Mallorca, Spain. exocad Insights 2026 Three completely different conversations somehow all landed on the same theme: digital dentistry keeps getting smaller, smarter, and way more connected. First up, the crew catches back up with digital designer and educator Marjorie de Andrade, who went from Brazil to New Zealand chasing opportunity, only to end up building a global career through remote design, social media, and education. Marjorie talks about creating the Mastering exocad course, freelancing for dentists around the world, and why finding purpose through teaching became more important than simply designing crowns. She also shares thoughts on the newly announced exocad Hub, remote collaboration, and how digital dentistry is making communication between dentists and technicians easier than ever. Then the microphones turn to Dr. Dwight Pate for one of the most workflow-heavy conversations the podcast has ever had. From hand waxing cases the old-school Dawson and Pankey way to designing provisionals and controlling full-mouth rehabs completely through exocad, Dr. Pate breaks down how he combines analog principles with digital workflows. The discussion dives deep into occlusion, provisionals, articulators, guided workflows, AI design, and why he believes digital dentistry still has to prove itself back in the analog world before it ever reaches the patient's mouth. Finally, the crew reconnects with Dr. Eimear O'Connell to talk about why clinicians need to attend events like Insights just as much as technicians. Eimear shares how digital workflows are improving communication between doctors, labs, and patients while making implant planning, dentures, and aesthetic dentistry more predictable than ever. From digital dentures that fit with almost zero adjustment to helping patients emotionally reconnect with their smiles, the conversation reminds everyone that behind every scanner, workflow, and software update is still a real person whose life changes because of dentistry.Special Guests: Dr. Dwight Pate, Dr. Eimear O'Connell, and Marjorie de Andrade .

From threatening solo devs to actual house fires, it has not been a great couple of weeks for  @BambuLab   @BambuLabSupport . And this is the time to break it ALL down, LIVE. From Open Source Violations to an actual house fire from a burned NTC Thermistor there is a lot to talk about. We have been covering the NTC issue for over a year, so we absolutely have some details to share. Ask your questions live!!We also had a chat with  @FauxHammer  the other day about differences of opinions in the industry that Jacob and Grant will be breaking down too, and MAYBE, if all goes well, THE HAMMER himself can join us for a bit ;) Want to check out the newest Prusa?? Use our affiliate link: https://b.link/CoreOneL-3DMWant edited versions of these shows? Check out  @makingawesome  for edited down shows and clips as well! A HUGE Thank you to the Filament Sponsors of these streams,  @printedsolid  and  @3dprima481 ! Check them out: https://printedsolid.comhttps://3dprima.com Use "MakingAwesome" for 20% off on all PrimaCreator and Copymaster3D materials until April 30th 2026Want to get some of the UK's fastest, and the first REAL Bamboo printer out there or the newly launched ALLCLEAN, the first dedicated 3D printer bed cleaner? Check out  @construct3d  https://b.link/Construct3DUse the discount code : "makingawesome" for 15% off.Need HIGH END 3D Scanning ANYWHERE in the world?? Check out  @3DMusketeers !! Utilizing over $250k in scanners, projects both big and small they can easily handle! Fully portable, able to bring the gear to you, 3D Musketeers is your one stop shop for all things Physical to Digital and even Digital to Physical. Full Service Art To Part rapid prototyping, product development, and of course, 3D Printing with 3D Musketeers! https://b.link/3DM__________________________________Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com/podcast and someone will get you set up to be a guest!

Contributing writer Jake Fogleman and I cover a new analysis of violent crime data that appears to show a further record drop in murder. We also discuss New York Governor Kathy Hochul's signing of a novel restriction on 3D printers aimed at preventing them from being used to create gun parts. Stories: -https://thereload.com/report-america-on-track-for-lowest-murder-rate-ever/ -https://thereload.com/new-york-bans-digital-gun-files-aims-at-3d-printers-capable-of-using-them/ -https://thereload.com/eighth-circuit-dismisses-challenge-to-minnesota-gun-carry-reciprocity-restrictions/ -https://thereload.com/analysis-where-is-dojs-gun-rights-restoration-plan-member-exclusive/ -https://www.virginiascope.com/virginia-state-police-to-start-background-checks-on-private-gun-sales-again/

Optimal Layer heights, Printing Food Safe, Using the last bits of filament, Voronoi it!, Thingiverse Spam, Bronzefill finishing

Dr. Gerardo Martinez is a returning guest on the show. We met up at AAPD and decided to record a podcast after flying home. We begin the conversation around changes in behavior management, and why it's ok for kids to cry at the dentist. The key is parent expectation and good communication.Dr. Martinez is also a visionary and advocate for 3D printing in pediatric dentistry. He has spent the last 5 years learning to incorporate scanning and 3D printing crowns, veneers, aligners, and appliances into his pediatric practice. We talk about first steps a practitioner can take to get started. Dr. Martinez is also hosting a CE event in Los Cabos from July 23-26. "The One Summit" has 28 CE credits with a central theme of airway, ortho, and 3D workflows. This would be a great way to get some CE this summer along with time on the beach. Even though it's a bit last minute, you can use code BTT to get $500 off registration and lodging.

David Tobin from @3DPrintingNerd , designer of the @zellerfeld D7, and 3D Printing lawful advocate will be joining us for a more in depth discussion on the laws regarding 3D Printing Regulation happening all over the USA. As a resident of California, David is in the middle of it and is one of the figureheads of protecting the rights of users, makers, and businesses nationwide. The laws David is working against would have astronomical impacts on the industry as a whole and would likely destroy the 3D printing industry as we know it. He is educated, passionate, and a professional in the industry as the Producer of the 3D Printing Nerd channel hosted by Joel Telling. Want to learn more about the California bill David and many others are opposing? Check it out here: https://www.the3dprintingnerd.com/ab2047Want to get some AWESOME 3D printed shoes?? check out the ones David designed: https://www.zellerfeld.com/products/d7Want to follow along in the endeavours of David? Follow him on IG: https://www.instagram.com/david_tobin/Want to check out the newest Prusa?? Use our affiliate link: https://b.link/CoreOneL-3DMWant edited versions of these shows? Check out @makingawesome for edited down shows and clips as well! A HUGE Thank you to the Filament Sponsors of these streams, @printedsolid and @3dprima481 ! Check them out: https://printedsolid.comhttps://3dprima.com Use "MakingAwesome" for 20% off on all PrimaCreator and Copymaster3D materials until April 30th 2026Want to get some of the UK's fastest, and the first REAL Bamboo printer out there or the newly launched ALLCLEAN, the first dedicated 3D printer bed cleaner? Check out @construct3d https://b.link/Construct3DUse the discount code : "makingawesome" for 15% off.Need HIGH END 3D Scanning ANYWHERE in the world?? Check out @3DMusketeers !! Utilizing over $250k in scanners, projects both big and small they can easily handle! Fully portable, able to bring the gear to you, 3D Musketeers is your one stop shop for all things Physical to Digital and even Digital to Physical. Full Service Art To Part rapid prototyping, product development, and of course, 3D Printing with 3D Musketeers! https://b.link/3DM__________________________________Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com/podcast and someone will get you set up to be a guest!

We're joined by Special Guest CoRy Wysz and discuss Devil May Cry update; Cowboy BeBop; Oysters; Beer of the Week and more. 

Devin Crow talks about The Boroughs, Punisher: One More Kill; and more, including (of course) our Beer of the Week Busch Apple.

Today we're joined by long time friend of the show, pillar of the community, fellow youtuber, and 3D Printing sculptor Landspeeder Luke! He's seen The Mandalorian & Grogu, and he'll talk about it in non-spoilery ways. Don't forget to give Zach a follow on his new IG @blackseriescantina! https://www.instagram.com/blackseriescantina/ If you want to join future podcasts and listen as we record live and interact with us as it's recording, consider joining us on Patreon. We also host give aways. Or if you just want to support the podcast and see a video version, you can do that there too. The video version is already up! https://www.patreon.com/blackseriescantina Check out our Merch! https://blackseriescantina.myspreadshop.com/ Email us with any questions or comments blackseriescantina@gmail.com Check out Zach on Instagram @blackseriescantina Zach on TikTok @thestarwarsblackseries Check out Mike on YouTube www.youtube.com/c/mikekaess And on IG @mike.kaess Blue Sky Mike.Kaess

In this episode of Retail War Games, I sit down with Ben Baltes, the co-founder and CEO of Toybox. Ben is a brilliant former Microsoft programmer who took a heavily fragmented, complex industrial tool and completely reimagined it for true consumer adoption. We pull back the curtain on how Toybox built a friction-free "click-to-print" software ecosystem that allows kids aged 6 to 12 to print out high-quality toys with the press of a button. Ben shares the reality of moving from an 8-year, highly predictable DTC framework to landing major retail wins—including an insane 20,000-unit sell-out at Sam's Club in just a couple of months. We also dive into the high-stakes world of entertainment licensing with heavy hitters like DreamWorks, Warner Bros, and NASA, and get the honest, unfiltered story of how a legendary appearance on Shark Tank literally saved the business from shutting down.  

Slic3r and Mightyboard based bots, Voxel Stacking, Julia Vases, Different Infill for Top and Bottom, Bed Leveling, Ben Franklin's Key

Senior Editor Michael McConnell speaks with Jason Rolland, PhD, chief technology officer at Carbon, a California-based 3D printing technology company, about the growing role of additive manufacturing in healthcare and where he thinks the technology will go in the future. This episode is a recording of the latest episode of Advanced Manufacturing Live. Previous episodes of Advanced Manufacturing Live are available on advancedmanufacturing.org/live. Follow SME Media on Facebook, LinkedIn, X and YouTube to join us live every other Thursday at 1 p.m. Eastern Time.

In the 300th episode of the 3DPOD, we take a look at what we think will happen over the next 12 months; for instance, what will happen with Bambu’s dominance, what will happen to Formlabs, what will happen to the market as a whole? Then we veer off into a discussion about heroes, Midway, and how the entire future of the US´s global dominance rests on the shoulders of two very different men. This episode of the 3DPOD is brought to you by FacFox, where your next product starts as a file and ends as a custom-made reality. With instant quoting, rapid design feedback, and on-demand 3D printing, CNC machining, injection molding, and more, FacFox makes it easier to test out ideas, fine-tune every detail, and manufacture with confidence. Curious what your design could become? Upload it and find out.  

Hello voices from the bench community, John Wilson here and I wanted to share some news about the evolution of the Programill lineup. Most importantly, Ivoclar's new PrograMill 7. What stands out right away is the reduced air consumption this mill requires, but what you'll notice first is that impressive new touchscreen. For us, the biggest advantage has been increased spindle power. My laboratory's known for these larger cases with complex geometries, and I can tell you that extra power really makes a difference. Next time you see your Ivoclar representative, be sure to ask about the PrograMill 7 and tell them John Wilson sent you. Thank you. At exocad Insights in beautiful Mallorca, we finally caught up with Felix from Imagine USA—and the timing couldn't have been better. As an exocad dealer on the front lines of digital dentistry, Felix shared his excitement about the strong turnout, the familiar faces, and most importantly, the innovation coming from exocad. What stood out most? The new exocad Hub and its cloud-based capabilities, along with powerful AI-driven tools inside DentalDB designed for efficient batch processing. For Felix and the Imagine team, it's not just about seeing what's new—it's about putting it to the test. By running new features through their own production facility first, they ensure real-world performance before bringing solutions to their customers. Beyond the technology, Felix emphasized the value of being there in person—connecting face-to-face with partners, having meaningful conversations, and stepping back to see where the industry is headed. And of course, doing it all in Mallorca doesn't hurt either. This week at the Dental Laboratory Association of Texas Meeting 2026, the microphones stayed hot as three completely different conversations all circled around the same thing: how fast the dental lab industry is evolving. First up, the crew sat down with Tony Aliatim from Axis Dental Milling to talk about going from biomedical engineering and printing silicone heart models for surgeons… to becoming one of the go-to names in dental milling. From industrial machining roots in Michigan to AI-powered calibration systems and Straumann plug-and-play workflows, Tony breaks down how VersaMill machines are helping labs mill everything from zirconia to implant abutments faster, smarter, and safer. Along the way, the conversation dives into HyperDent, trade show madness, wet vs dry milling nightmares, and why dental technicians may not realize how close this industry really is to aerospace-level manufacturing. Then things shifted from mills to maintenance with Rebekah Serrago and Chris Wilson from Garland Dental Services. What started decades ago as a garage-based repair business fixing handpieces has grown into one of the industry's best-kept secrets for equipment sales, service, and support. Rebekah shares the story of growing up folding flyers for her father's repair company before eventually becoming CEO and expanding Garland into a massive online sales and service operation supporting everything from ovens to mills. Chris joins in to talk preventative maintenance, service certifications, keeping ancient ovens alive, and why labs desperately need dealers that actually understand the equipment they sell. It's equal parts family-business story, repair shop wisdom, and hilarious behind-the-scenes dental lab banter. Finally, the future officially arrived when the podcast crew sat down with Antoine Coppens from Relu and orthodontic lab owner Christian Saurman of New England Orthodontic Laboratory. What started as four engineering students experimenting with AI in Belgium somehow turned into fully automated dental workflows capable of designing surgical guides, night guards, models, and restorations in minutes. The conversation explores how AI is reshaping lab workflows, reducing manual design time, integrating directly into LMS systems, and even learning individual lab preferences. Christian explains how his custom-built orthodontic lab management system helped eliminate workflow chaos and automate huge portions of production, while Antoine gives a fascinating look into where dental AI is headed next. Between AI-generated appliances, automated scan checks, and self-learning workflows, this episode feels less like science fiction and more like a preview of what labs will look like over the next five years.Special Guests: Antoine Coppens, Chris Wilson, Christian Saurman, Rebekah Serrago, and Tony Aliatim.

Gabe from Slant 3D  joins us after a hiatus to talk all about what it takes to make one of the most successful 3d print farms in the USA. From custom printers to filament made in house, his tips and tricks will help you grow your business FAST. Check them out: https://slant3d.com Want to check out the newest Prusa?? Use our affiliate link: https://b.link/CoreOneL-3DMWant edited versions of these shows? Check out  @makingawesome  for edited down shows and clips as well! A HUGE Thank you to the Filament Sponsors of these streams,  @printedsolid  and  @3dprima481 ! Check them out: https://printedsolid.comhttps://3dprima.com Use "MakingAwesome" for 20% off on all PrimaCreator and Copymaster3D materials until April 30th 2026Want to get some of the UK's fastest, and the first REAL Bamboo printer out there or the newly launched ALLCLEAN, the first dedicated 3D printer bed cleaner? Check out  @construct3d  https://b.link/Construct3DUse the discount code : "makingawesome" for 15% off.Need HIGH END 3D Scanning ANYWHERE in the world?? Check out  @3DMusketeers !! Utilizing over $250k in scanners, projects both big and small they can easily handle! Fully portable, able to bring the gear to you, 3D Musketeers is your one stop shop for all things Physical to Digital and even Digital to Physical. Full Service Art To Part rapid prototyping, product development, and of course, 3D Printing with 3D Musketeers! https://b.link/3DM__________________________________Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com/podcast and someone will get you set up to be a guest!

Terrain2STL, Adjusting fit in Blender, 3d Printing and Pet Birds, Stepper Motors for Beginners, 

See the movie here: The Xenophobes https://watch.amazon.com/detail?gti=amzn1.dv.gti.c94da764-374d-439d-a9c7-1168dd8b815d Get your Xenophobes social media banners here:  lancerkind.com/the-xenophobes-latest-news About Jess Weaver Jess on IMDB: https://www.imdb.com/name/nm7118486/?ref_=ttfc_fcr_3_9 Jess’s other work: https://www.harlequinproductions.org/artist/jessica-weaver/ Jess’s home page: https://www.jessicaweaver.net About the movie: I've got some big news I've been waiting to share: my science fiction film THE XENOPHOBES is going to be available for rental on […]

Help us welcome our newest sponsor...GORILLA GLUE! Go to gorillatough.com/shopsounds to learn more about their amazing line up of products!In this episode, Jason talks about his Seahawks project and has some issues with faceframes, powder coating and steel studs. Keith STILL can't get out of his own way on his current wall hanging cabinet and his LED's are strangling the whole project. Mary didn't measure twice before cutting her leather, but is enjoying her new stained glass work area and backyard reno. Be sure to check out Bits & Bits at www.bitsbits.com and use coupon code MORSELS15 to save 15% on your order of router and/or CNC bits. Be sure to hit up Katz-Moses Tools at www.KMTools.com - cool tools at a fair price. If it's on their website, it's in Jonathan's apron. www.kmtools.com **And check out the new Katz Moses toolless adjustable countersink and new sharpening jig and sliding stop block. Oh, and don't forget about his new aluminum channel French Cleat system with some bad azz 3D printed accessories that lock in place!! WTB Woodworking's latest giveaway is a $1000 shopping spree with Bits and Bits!! Register at wtbwoodworking.com/giveaway. And be sure to check out WTB Woodworking at 390 Pike Road, Unit 2, Huntingdon Valley, PA for lumber, slabs, woodworking tools and MORE!! Or shop online and earn yourself some Burkell bucks for every dollar you spend! Go to wtbwoodworking.com to shop online. Join us at WTB Woodworking for Mafell Day on Friday May 23rd from 8a-1pm. Demos, food, bevvies and giveaways.Help us support Grit-Grip!! A revolutionary new breed of double-sided sanding sponges that we all LOVE! Check it out at https://grit-grip.com/ and use code "shopsounds" at checkout to get a free sanding block!The Bourbon Blade: https://www.bourbonmoth.com/shop/p/the-bourbon-blade-original-pocket-chiselIf you'd like to support us on Patreon and have access to our irreverent aftershow, you can sign up here: https://www.patreon.com/shopsoundspodcastYou can find us on Instagram, Youtube, Facebook and TikTok (maybe): Bourbon Moth Woodworking and Keith Johnson Woodworking and Kodamari Design

We review the racing from IRONMAN 70.3 Gulf Coast and that world record breaking dominant bike performance from Sam Long. Kate Bevilaqua has been following the recent Ultraman in Australia. Plus, we review the racing from Challenge Salou The state of professional prize pools – are there athlete payment issues within the PTO? The evolving technology in cycling including gear ratios and 3D-printed components. Upcoming races to watch – IRONMAN 70.3 Chattanooga and IRONMAN 70.3 Aix en Provence. Jack shares with us how he would tackle that hilly bike course in Aix. Kevin Hunt discusses his race at IRONMAN 70.3 Western Sydney   CHAPTERS 0:03:40 – Jacks last run training session before Hawkes Bay Marathon 0:10:17 – Ultraman Australia recap 0:13:12 – IRONMAN 70.3 race review and Sam Long's bike split 0:23:16 - 3D Printing in bike design 0:28:46 – IRONMAN 70.3 Chattanooga this weekend 0:29:19 – Challenge Salou recap 0:33:46 – PTO athlete payout concerns 0:40:21 – Chattanooga race insights and Chris Beckmans 0:45:48 – IRONMAN 70.3 Aix en Provence 0:56:26 – Bike course at IRONMAN 70.3 Aix en Provence 0:58:21 – Kevin Hunt and IRONMAN 70.3 Western Sydney LINKS: Jack Moody at https://www.instagram.com/jacktmoody/ Kate Bevilaqua at https://www.instagram.com/katebevilaqua/ Guy Crawford at https://www.instagram.com/guyrcrawford/ IM703 Gulf Coast at https://www.ironman.com/races/im703-gulf-coast Sam Long at https://www.instagram.com/samgolong/ IM703 Western Sydney at https://www.ironman.com/races/im703-western-sydney Hawkes Bay Marathon at https://hawkesbaymarathon.co.nz/ Ultraman Australia at https://ultramanoz.com.au/ IM703 Aix en Provence at https://www.ironman.com/races/im703-aix-en-provence IM703 Chattanooga at https://www.ironman.com/races/im703-chattanooga Challenge Salou at https://challenge-salou.com/en/

Devin Crow talks about anime and movies, including The Toxic Avenger and Late Night with the Devil

Hello voices from the bench community, John Wilson here and I wanted to share some news about the evolution of the Programill lineup. Most importantly, Ivoclar's new PrograMill 7. What stands out right away is the reduced air consumption this mill requires, but what you'll notice first is that impressive new touchscreen. For us, the biggest advantage has been increased spindle power. My laboratory's known for these larger cases with complex geometries, and I can tell you that extra power really makes a difference. Next time you see your Ivoclar representative, be sure to ask about the PrograMill 7 and tell them John Wilson sent you. Thank you. At exocad Insights in beautiful Mallorca, we finally caught up with Felix from Imagine USA—and the timing couldn't have been better. As an exocad dealer on the front lines of digital dentistry, Felix shared his excitement about the strong turnout, the familiar faces, and most importantly, the innovation coming from exocad. What stood out most? The new exocad Hub and its cloud-based capabilities, along with powerful AI-driven tools inside DentalDB designed for efficient batch processing. For Felix and the Imagine team, it's not just about seeing what's new—it's about putting it to the test. By running new features through their own production facility first, they ensure real-world performance before bringing solutions to their customers. Beyond the technology, Felix emphasized the value of being there in person—connecting face-to-face with partners, having meaningful conversations, and stepping back to see where the industry is headed. And of course, doing it all in Mallorca doesn't hurt either. From wire-bending machines and digital ortho workflows to Vulcanite dentures and photogrammetry, this episode from the DLAT floor is packed with stories, laughs, and a whole lot of dental lab wisdom. First up, the crew sits down with Jason Dyas — better known these days as the man behind Ortho Outlaw and everyone's favorite outlaw mascot, Clyde. Jason shares his journey from construction work and garage-built orthodontic appliances to running successful ortho labs and diving headfirst into digital technology. What started with fax-machine marketing and Walmart bench grinders eventually evolved into automated wire-bending machines, digital scanning, social media content creation, and a growing mission to help older labs embrace modern workflows instead of shutting their doors. The conversation covers everything from AI-driven ortho tech and the future of wire bending to building a brand, traveling to industry events around the world, and how Ortho Outlaw became one of the most recognizable new names in orthodontic lab social media. Then the podcast catches up with longtime friend of the show Jim Collis for an incredible deep dive into 45 years of dental technology experience. Jim talks about teaching hands-on courses at DLAT, helping labs transition from analog workflows into digital dentures and 3D printing, and why education is still the key to success in modern dentistry. From discussing AI-assisted denture design and automated workflows to reminiscing about fixing Vulcanite dentures and the earliest days of implants, Jim delivers one amazing story after another. Along the way, he shares lessons from his CDT journey, the mentors who shaped his career, his passion for consulting and education, and why he still loves this industry after nearly five decades. It's equal parts history lesson, technology discussion, and classic Voices From the Bench chaos — complete with Star Trek references, Slurpee stories, and enough off-topic tangents to make Barb proud.Special Guests: Clyde, Jason Dyas, and Jim Collis CDT.

A weekly live show covering all things Freedom Tech with Max, Q and Seth.GO TO https://watchmanprivacy.com for more information [[BILLLKEONNE]]TO DONATE TO ROMAN'S DEFENSE FUND: https://freeromanstorm.com/donateVALUE FOR VALUEThanks for listening you Ungovernable Misfits, we appreciate your continued support and hope you enjoy the shows.You can support this episode using your time, talent or treasure.TIME:- create fountain clips for the show- create a meetup- help boost the signal on social mediaTALENT:- create ungovernable misfit inspired art, animation or music- design or implement some software that can make the podcast better- use whatever talents you have to make a contribution to the show!TREASURE:- BOOST IT OR STREAM SATS on the Podcasting 2.0 apps @ https://podcastapps.com- DONATE via Monero @ https://xmrchat.com/ugmf- BUY SOME STICKERS @ https://www.ungovernablemisfits.com/shop/FOUNDATIONhttps://foundation.xyz/ungovernableFoundation builds Bitcoin-centric tools that empower you to reclaim your digital sovereignty.As a sovereign computing company, Foundation is the antithesis of today's tech conglomerates. Returning to cypherpunk principles, they build open source technology that “can't be evil”.Thank you Foundation Devices for sponsoring the show!Use code: Ungovernable for $10 off of your purchaseCAKE WALLEThttps://cakewallet.comCake Wallet is an open-source, non-custodial wallet available on Android, iOS, macOS, and Linux.Features:- Built-in Exchange: Swap easily between Bitcoin and Monero.- User-Friendly: Simple interface for all users.Monero Users:- Batch Transactions: Send multiple payments at once.- Faster Syncing: Optimized syncing via specified restore heights- Proxy Support: Enhance privacy with proxy node options.Bitcoin Users:- Coin Control: Manage your transactions effectively.- Silent Payments: Static bitcoin addresses- Batch Transactions: Streamline your payment process.Thank you Cake Wallet for sponsoring the show!MYNYMBOXhttps://mynymbox.ioYour go-to for anonymous server hosting solutions, featuring: virtual private & dedicated servers, domain registration and DNS parking. We don't require any of your personal information, and you can purchase using Bitcoin, Lightning, Monero and many other cryptos.Explore benefits such as No KYC, complete privacy & security, and human support.

Different Ways of Controlling Toolpaths, Barker Dam Scan

Jesse Roitenberg is the Education Director at Stratasys. We go through his 20-year journey in additive, starting in some really pioneering days at Stratasys in sales. Jesse talks about desktop 3D printers, using 3D printing in education, using 3D printing in universities, 3D printers in schools, and more. We talk about software, CAD, and teaching 3D printing as well. From dental training solutions to machines for engineering, it all passes the review. We also go through Stratasys’s position and the journey the company has been on. This episode of the 3DPOD is brought to you by Alexander Daniels Global, specialists in talent solutions for the additive manufacturing and advanced engineering sectors. From the production line to the C-suite, ADG delivers confidential hiring, supports rapid scale-up phases, and secures critical leadership appointments, helping industry 4.0 businesses buld teams that need to perform, innovate, and lead.

Fluent Fiction - Hindi: From Mismatched Shoes to Standing Ovations: Arohi's Breakthrough Find the full episode transcript, vocabulary words, and more:fluentfiction.com/hi/episode/2026-05-04-07-38-19-hi Story Transcript:Hi: वसंत का मौसम था और सूर्य की किरणें अंतरराष्ट्रीय शिखर सम्मेलन के केंद्र को खुशी से चमका रही थीं।En: It was the season of spring, and the sun's rays were joyfully illuminating the International Summit Center.Hi: इस बार का सम्मलेन नई दिल्ली के विशाल सम्मेलन केंद्र में हो रहा था, जहां दुनियाभर के कलाकार, तकनीकी विशेषज्ञ और कला प्रेमी 3D प्रिंटिंग की नई तकनीकों पर चर्चा करने आए थे।En: This time, the summit was taking place at the vast conference center in New Delhi, where artists, technical experts, and art enthusiasts from around the world had gathered to discuss new techniques in 3D printing.Hi: बगीचे की ताजी हवा और फूलों की सुगंध चारों तरफ फैल रही थी।En: The fresh garden air and the fragrance of flowers spread all around.Hi: आरोही और उनके दो सहयोगी, निष्ठा और राहुल, उत्साहित थे।En: Arohi and her two colleagues, Nishtha and Rahul, were excited.Hi: आरोही सम्मेलन में भाग लेने के लिए नई दिल्ली आए थे क्योंकि उन्हें अचानक एक महत्वपूर्ण प्रस्तुति देने का मौका मिला था।En: Arohi had come to New Delhi to participate in the conference because she suddenly got an opportunity to deliver an important presentation.Hi: यह प्रस्तुति उनके लिए बहुत महत्वपूर्ण थी, क्योंकि इससे उन्हें अपने कला प्रोजेक्ट के लिए समर्थन और पहचान मिल सकती थी।En: This presentation was very important for her, as it could bring her support and recognition for her art project.Hi: सम्मेलन में पहुंचने से पहले सब कुछ सामान्य लग रहा था।En: Everything seemed normal before reaching the conference.Hi: लेकिन जब आरोही मंच के पास पहुंचे, उन्हें अहसास हुआ कि उन्होंने गलती से अलग-अलग जोड़ी के जूते पहन लिए थे।En: But when Arohi reached near the stage, she realized she had mistakenly worn mismatched shoes.Hi: एक जूता काले रंग का था, और दूसरा भूरा।En: One shoe was black, and the other was brown.Hi: इस अजीब गलती ने आरोही को असमंजस में डाल दिया।En: This unusual mistake left Arohi bewildered.Hi: वे घबरा गए, लेकिन फिर उन्होंने खुद को शांत किया।En: She panicked, but then she calmed herself.Hi: तभी उनके मन में एक विचार आया।En: Suddenly, an idea struck her.Hi: अपनी प्रस्तुति के दौरान, आरोही ने एक बात बड़े आत्मविश्वास से कही, "दोस्तो, जैसा कि आप सभी देख सकते हैं, मेरे पैरों में अलग-अलग रंग के जूते हैं।En: During her presentation, Arohi confidently said, "Friends, as you can all see, I'm wearing shoes of different colors.Hi: लेकिन यह गलती नहीं, यह हमारे असली जीवन की तरह एक प्रतीक है।En: But this isn't a mistake; it's a symbol of our real lives.Hi: कभी-कभी हमारे जीवन और कला में अपूर्णताएं होती हैं।En: Sometimes, there are imperfections in our lives and art.Hi: और ये अपूर्णताएं ही हमारी रचनात्मकता को बुनती हैं।En: And these imperfections are what weave our creativity."Hi: " आरोही की यह बात सुनकर पूरा हॉल तालियों की गूंज से गूंज उठा।En: Hearing this, the entire hall erupted in applause.Hi: आरोही के इस अप्रत्याशित समाधान को सभी ने सराहा।En: Everyone appreciated Arohi's unexpected solution.Hi: प्रस्तुति के बाद कई दर्शक उनके पास आए और उनके झूठे उत्साह और रचनात्मकता को सराहा।En: After the presentation, many attendees approached her and praised her spontaneous enthusiasm and creativity.Hi: उनमें से कुछ ने उनके प्रोजेक्ट के लिए वित्तीय सहयोग का भी प्रस्ताव दिया।En: Some even offered financial support for her project.Hi: इस अनुभव से आरोही ने सीखा कि जीवन में परिस्थितियाँ अप्रत्याशित होती हैं।En: From this experience, Arohi learned that circumstances in life are unpredictable.Hi: लेकिन अगर हम उनका सामना साहस और रचनात्मकता से करें, तो वे ही हमें आगे बढ़ा सकती हैं।En: But if we face them with courage and creativity, they can propel us forward.Hi: उस दिन आरोही को यह एहसास हुआ कि उन्होंने न केवल एक महत्वपूर्ण प्रदर्शन किया, बल्कि एक अनमोल सबक भी सीखा जो उनके जीवन में अटल रहेगा।En: That day, Arohi realized that she not only made an important presentation but also learned a priceless lesson that would remain steadfast throughout her life. Vocabulary Words:illuminating: चमका रहीsummit: शिखर सम्मेलनenthusiasts: प्रेमीfragrance: सुगंधmismatched: अलग-अलग जोड़ीbewildered: असमंजसspontaneous: झूठेimperfections: अपूर्णताएंweave: बुनतीapplause: तालियों की गूंजunpredictable: अप्रत्याशितcourage: साहसsteadfast: अटलopportunity: मौकाvast: विशालsupport: समर्थनrecognition: पहचानunusual: अजीबmistakenly: गलती सेsymbol: प्रतीकappreciated: सराहाfinancial: वित्तीयcircumstances: परिस्थितियाँstruck: आयाdelivering: देनेconference: सम्मेलनpropel: आगे बढ़ा सकतीpresentation: प्रस्तुतिartists: कलाकारexperts: विशेषज्ञ

We've got a project potpourri this week of things we've been getting our hands on, literally in the case of Will and his brand new Steam Controller. We talk through the ins and outs of Valve's first new hardware in a while, including button feel, a variety of use cases, what you can do with it if Steam isn't present, and more. Will's also been in the mouse labs, testing an 8000Hz polling rate and glass feet, and finally, he reports on what he's gotten out of his first month with a new 3D printer. Brad's also been down a rabbit hole on 2D printing (and has the battle scars to prove it) with some news and revelations about paper printers new and old. Projects! Support the Pod! Contribute to the Tech Pod Patreon and get access to our booming Discord, a monthly bonus episode, your name in the credits, and other great benefits! You can support the show at: https://patreon.com/techpod

This week, Hackaday's Elliot Williams and Kristina Panos met up over the international tubes to bring you the latest news, mystery sound results show, and of course, a big bunch of hacks from the previous seven days or so. Regarding Hackaday Europe, we announced the last round of speakers and opened up the workshop ticket sales. In other news, the Green-Powered Challenge has wrapped, and judging will begin quite soon. On What's That Sound, we can score another one for Kristina, which brings her record to approximately four wins and sixty-eight losses. She knew without a doubt that this was a guillotine paper cutter, probably because she recorded the sound herself. Hey, don't take this away from her. After that, it's on to the hacks, beginning with a really cool laser-powered mist-and-mirrors multi-view display, a robotic drawing assistant of questionable utility, and a new slicer that enables horizontal overhangs without supports. We also look at a trackball 3D controller, a 3D-printed pinball machine, and a good way to kill humidity sensors with humidity. Finally, we're both shocked to learn that we've been on GPS mk. II for some time now. But then once we get over that, we talk tablets and their usefulness, or lack thereof. Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!  

Facet Knife Tool, Five Things You Should Not Print, Seams

On this episode, Marty Johnson, VP of Product and Technical Fellow at 3D Systems, joins the show to take a clear-eyed look at additive manufacturing materials—what they can do, what they can't, and what engineers should realistically expect when composites and filled materials enter the 3D-printing conversation. The post 268: 3D Printing Boundaries – What Additive Manufacturing Can and Can't Do first appeared on Cast Polymer Radio.

Hey Voices from the Bench community! Jessica Love here, sending a shoutout from Utah! If you're passionate about creating natural, beautiful smiles—but want to simplify your workflow without sacrificing aesthetics—this is for you. I'm honored to be part of Ivoclar's development team introducing a powerful new stain and glaze system featuring Structure Paste, IPS e.max Ceram Art. Create stunning depth and lifelike color in as little as one firing. Let's continue to innovate, simplify, and create meaningful change—one smile at a time. CAM has been a major topic lately, and a lot of that conversation keeps coming back to hyperDENT. But instead of just talking about the software itself, it's worth looking at real-world experience. Imagine USA has been using hyperDENT in their own lab for over 15 years. That kind of longevity says a lot—they're not just selling and supporting it, they're relying on it in their own production every single day. That's what really sets them apart. This week's episode brings it full circle as Elvis reconnects with one of the podcast's very first guests, Renata Bundy, now a longtime professor at New York City College of Technology. Along with her are two technicians who represent both sides of the journey—lab owner Roberto Rossi and workflow master Eugene Vega—creating a conversation that dives deep into education, mentorship, and what it really takes to succeed in today's dental lab world. Roberto shares his unlikely path from working sanitation in New York to building a thriving lab, Synergy Dental Studio, over nearly three decades. With a relentless focus on quality, constant improvement, and embracing digital (while still questioning it), he explains how his lab has grown into a tight-knit, high-level operation. Eugene adds perspective from inside the lab, describing his evolution from student to managing daily workflow, highlighting how important environment, mentorship, and work ethic are when transitioning from school to real-world production. Renata ties it all together from the educational side, reflecting on over 20 years of teaching and how the program has evolved alongside the industry—from analog fundamentals to digital workflows—while still preparing students for the realities they'll face after graduation. The group doesn't shy away from the tough truths either: low starting pay, steep learning curves, and the high dropout rate among new technicians. But the message is clear—stick with it, find the right lab, and the opportunity is there. It's a conversation about growth, grit, and the importance of surrounding yourself with the right people—whether that's in the classroom or the lab. And if nothing else, you'll learn that a little Italian lunch might just be the secret to building a loyal team.Special Guests: Eugene Vega, Renata Budny, CDT, TE, and Roberto Rossi.

New York's latest budget proposal could fundamentally change how 3D printers work—requiring built-in software that scans and blocks certain designs. Supporters say it's about stopping ghost guns. Critics say it opens the door to surveillance and limits innovation. In this episode, we discuss what's actually in the proposal, why it's raising alarms across the tech community, and what it could mean for the future of user-controlled technology. ** Links mentioned on the show ** Stop New York's Attack on 3D Printing! https://www.eff.org/deeplinks/2026/04/stop-new-yorks-attack-3d-printing ** Watch this episode on YouTube ** ** Become a Shared Security Supporter ** Get exclusive access to bonus episodes, listen to new episodes before they are released, receive a monthly shout-out on the show, and get a discount code for 15% off merch at the Shared Security store. Become a supporter today by going to our YouTube channel's membership section: https://www.youtube.com/channel/UCg9CCDIYkDDqwEZ3UYaxjnA/join ** Thank you to our sponsors! ** SLNT Visit slnt.com to check out SLNT's amazing line of Faraday bags and other products built to protect your privacy. As a listener of this podcast you receive 10% off your order at checkout using discount code “sharedsecurity”. ** Subscribe and follow the podcast ** Subscribe on YouTube: https://www.youtube.com/c/SharedSecurityPodcast Follow us on Bluesky: https://bsky.app/profile/sharedsecurity.bsky.social Follow us on Mastodon: https://infosec.exchange/@sharedsecurity Join us on Reddit: https://www.reddit.com/r/SharedSecurityShow/ Visit our website: https://sharedsecurity.net Subscribe on your favorite podcast app: https://sharedsecurity.net/subscribe Sign-up for our email newsletter to receive updates about the podcast, contest announcements, and special offers from our sponsors: https://shared-security.beehiiv.com/subscribe Leave us a rating and review: https://ratethispodcast.com/sharedsecurity Contact us: https://sharedsecurity.net/contact The post New York's 3D Printing Crackdown: Security or Surveillance? appeared first on Shared Security Podcast.

Paint Vs Part, More Elegoo Mess, Kicking the old machines to the curb

Hey Voices from the Bench community! Jessica Love here, sending a shoutout from Utah! If you're passionate about creating natural, beautiful smiles—but want to simplify your workflow without sacrificing aesthetics—this is for you. I'm honored to be part of Ivoclar's development team introducing a powerful new stain and glaze system featuring Structure Paste, IPS e.max Ceram Art. Create stunning depth and lifelike color in as little as one firing. Let's continue to innovate, simplify, and create meaningful change—one smile at a time. CAM has been a major topic lately, and a lot of that conversation keeps coming back to hyperDENT. But instead of just talking about the software itself, it's worth looking at real-world experience. Imagine USA has been using hyperDENT in their own lab for over 15 years. That kind of longevity says a lot—they're not just selling and supporting it, they're relying on it in their own production every single day. That's what really sets them apart. This week, Elvis and Barb sits down with Katherine Steinbock-Dyke of Whip Mix to talk legacy, leadership, and the evolution of a family-run powerhouse in the dental industry. As part of the Steinbock lineage, Katherine shares what it was like growing up around the business—from selling Girl Scout cookies on the shop floor to eventually stepping into the CEO role. Her journey wasn't a straight line, starting instead in international business and corporate HR before finding her way back to Whip Mix and working her way through multiple roles across the company. The conversation dives into the realities of running a multi-generational company in a rapidly changing industry. Katherine talks about balancing tradition with innovation, from gypsum and articulators to digital workflows and resin development. She opens up about the challenges of staying relevant, the importance of continuous improvement (hello, WIN program), and what it really means to lead a team she genuinely cares about. Along the way, there's plenty of classic bench banter—everything from assembling pizzas at Papa John's to the chaos of early 3D printing workflows and navigating massive trade shows like IDS. The episode wraps with a look at where Whip Mix is headed, Katherine's focus on reconnecting with labs and customers, and how the next generation is shaping the future of dental manufacturing while respecting its roots.Special Guest: Katherine Steinbock-Dyke.

XL nozzle crash, Controlling Color Depth, Prusa Material Temps

Brad's out this week, so Norman Chan takes the guest chair to talk us through the current state of the art in 3D printing. We cover the latest in FDM printers, whether resin printers are right for you, the best places to find 3D models to print, how you can edit and adjust the models you want to print, and a whole lot more!  Support the Pod! Contribute to the Tech Pod Patreon and get access to our booming Discord, a monthly bonus episode, your name in the credits, and other great benefits! You can support the show at: https://patreon.com/techpod