Podcasts about kulzer

Join Journal Club Download my free guide to Internal Bleaching PDF Follow @dental_digest_podcast Instagram Follow @dr.melissa_seibert on Instagram Connect with Melissa on Linkedin  DOT - Use the Code DENTALDIGEST for 10% off   Qualified at the Royal London Hospital in 1995; achieving a number of awards including The Constance Klein Memorial, The Stafford Millar, and The Malcolm Jenkins Scholarships, The American Association of Endodontics Prize and the Overall Award for Clinical Dentistry. After spending 3 years in oral surgery residency in London and a further year practicing restorative dentistry in London's Harley Street Medical District, he relocated to Cornwall in the extreme southwest of England. Jason practices at Revitalise, Cornwall, UK where his main focus is microscope enhanced adhesive dentistry. His specific interest is direct composite resin artistry and minimally invasive all ceramic restorations and he has presented to dentists locally, nationally and internationally (USA, Canada, Australia, New Zealand, South East Asia and Europe) on this topic. He has given hands on programs in the UK, Europe, Asia, and North America on behalf of GC, Ivoclar, Kerr, Kulzer, Optident, Micerium, Carl Zeiss, Zumax, Global, Velopex and Triodent. He is a European “Key Opinion Leader” for Kulzer and is a member of the European Prosthodontic Advisory Board for GC Europe. Jason is Resident Faculty at The Centre for Esthetic Excellence, Chicago, USA. He is an Accredited International Trainer for Carl Zeiss Dental Academy. Jason is the only European Resident Faculty at Spear Education AZ USA, where he is an instructor in The Composite Program. Jason has achieved Diplomat Status in Restorative Dentistry from the Royal College of Surgeons (England). He is on the Editorial Board of The Russian Journal of Esthetic Dentistry and has published numerous peer-reviewed articles on adhesive and aesthetic dentistry in both the UK and abroad. He is joint author of “Vertical Margin Finish Lines In Fixed Prosthodontics”   

Ready to dive into the empowering journeys of three extraordinary women in tech? In today's episode, I invite three amazing women I have the honor of supporting to dive into their experiences, insights, and triumphs through the lens of executive coaching. Lindsay, Allison, and Jennifer candidly share their motivations for seeking executive coaching, its transformative impact on their professional development, and powerful career lessons around overcoming imposter syndrome, burnout, gender bias, and more. We explore the pivotal moments that led them to join The Lit Up Leadership Academy, the biggest successes they've achieved, and the one thing they wish they had known about themselves a decade ago. Join us to uncover the importance of embracing one's identity, confronting self-doubt, and cultivating resilience in the face of adversity - you don't want to miss these valuable leadership insights & strategies!  We dive into: The highlights and lowlights from their three incredible tech careers Why they joined the Lit Up Leadership Academy Some of their biggest academy successes: empathy, celebration, and finding alignment Effectively dealing with imposter syndrome and self-doubt in career transition Lessons on kindness and empathy in leadership, pushing tech boundaries, and external validation And more   **Useful links** Connect with today's amazing women in tech guests: Lindsay Kulzer: https://www.linkedin.com/in/lindsay-kulzer/ Jen Peters: https://www.linkedin.com/in/jenniferepeters/  Allison Williams: https://www.linkedin.com/in/allisonmwilliams/  If you are ready to uplevel your career, get unstuck or you are simply ready to unlock those leadership time-management techniques then join us in my monthly career & leadership coaching program exclusively for women in tech: https://www.tonicollis.com/academy  Catch the show notes, and more details about today's episode here: https://tonicollis.com/episode200  Check us out on Youtube. Join the Leading Women in Tech community in Slack where we discuss all-the-things for women's tech leadership, covering everything from early-career leadership to C-level executives.

Language matters.  Ein Thema, das mir am Herzen liegt und bei dem Prof. Dr. Bernhard Kulzer vom Diabetes Zentrum Mergentheim genau die richtigen Worte findet:  "Es ist wichtig an dem Hebel zu arbeiten; dass durch einen anderen Sprachgebrauch auch das Denken und die Art und Weise, wie man etwas ansieht, sich langfristig verändern kann". Und das gilt auch beim Diabetes. Wie beeinflusst die Sprache die Beziehung zwischen Ärzt:in und Patient:in? Welches Bild zeichnet eine künstliche Intelligenz von einem Menschen mit Diabetes? Wieso werden psychische Erkrankungen manchmal mit Gefahr assoziiert? Diese Fragen betrachte ich mit Prof. Dr. Kulzer, der seit über dreißig Jahren im Bereich Diabetes und Psychologie forscht und arbeitet. Zur Feier des 40-jährigen Jubiläums der Diabetes Klinik Mergentheim habe ich Bernd eingeladen und spreche mit ihm über die Wirkmächtigkeit von Sprache, von Vorurteilen und Stereotypen und was wir dem entgegen setzen können - ob bei Diabetes, Übergewicht oder psychischen Störungen. 

Simon Kulzer ist einer der wenigen Beachvolleyballer in Deutschland, die aktuell abseits der Nationalteams ihr Glück auf der Pro Tour versuchen. Wie er das macht und was dahinter steckt, erfahrt ihr in dieser Episode. Zu Gast: Simon Kulzer Maximum bei Twitch: https://www.twitch.tv/maximumbeachvolleyball Unterstützt mich bei Paypal: paypal.me/maximumbeach Folgt auch bei Youtube und Instagram und checkt maximumbeachvolleyball.de

In today's episode of The Sales Evangelist, our host Donald Kelly meets with Tom Kulzer to talk about how you can send optimal emails that will see results. Understanding Emails Over the years, Google's spam filter has slowly increased. Kulzer says that Google's filter has gotten better at figuring out what people WANT and what they DON'T want. Whatever isn't wanted will go to spam. If your emails are going to spam, then it means that Google's determined something in your email is what people AREN'T wanting. To avoid getting sent to spam, then you have to send emails with things people will want to see, at least according to Google. Setting Expectations One tool you can use to avoid your emails being marked as spam is by setting expectations. The example that Kulzer gives is How many emails your recipient is expecting. If someone signs up for your newsletter and is expecting an email once a month, but starts receiving daily emails, they'll likely start putting your emails down as spam. Set expectations for your receiver upfront. Provide information on what you'll be emailing the receiver, and how often they can expect emails. If you meet your receiver's expectations, they'll not only engage WITH your emails but also not mark them as spam.     Understanding Google's Process If you want your emails to be seen and engaged with, you have to understand just exactly how Google processes your email. Google has information that you, as a sender, don't. Google knows things like how the recipient responded to the email, whether or not they marked it as spam, how much of the email they read and how long they spent reading it, etc. You, as a sender, have to make sure your email meets the things Google is looking for. Structure your email in such a way that it won't get sent to the wrong folder. Make it engaging, so your recipient will actually read the email. The Framework of a Good Email   Use your own domain when sending emails. Kulzer has noticed that MANY business owners want to send emails from their Gmail accounts. AVOID THIS. If you use your own business's domain, you'll start building a reputation as an email sender. Don't play games. Another trend that Kulzer has noticed is: Sometimes, senders will try and play games with their emails. For example, they'll put “fwd;” in their subject line, to make the receiver think they've forwarded the email. This trick will make your recipient lose trust in you. Would you trust someone who tricked you into opening an email? Or would you mark the email as spam? Send emails that have a purpose. Some of the worst-performing emails that Kulzer has seen are emails that have NO PURPOSE. If there's no reason to send an email, don't send one. Give your recipient SOMETHING of value, whether that be a promotion, deal, update, or whatever. Give them an actual reason to OPEN your email in the first place. Write your emails for one person. Keep in mind, whenever you write an email, ONE PERSON will be reading it. Although you'll send the email out to multiple people, whenever your email gets sent, ultimately it only ends up being read by one person. You're not talking to a giant audience in a stadium, you're talking to someone one on one. Word your emails accordingly. Use email automation. There's a concept in email marketing called conditional content. Essentially, it's similar to the YouTube algorithm. You look at the data of how your recipients engage with your email. Maybe they look at certain content more than others. Maybe they prefer some links over others. Whatever content your recipient engages with more, automation can put THAT content at the forefront of the email. Prune for unengaged recipients. Look at the data of your emails, and see who engages with your email and who doesn't. Just like sending emails with a purpose, only send emails to people for a reason. If someone isn't engaging with your emails, then don't send emails to them.                       If you want to connect with Tom Kulzer, you can check out his website at www.aweber.com. You can talk to Donald and drop him a message on LinkedIn, Tik Tok, and Instagram at donaldckelly. You can also join TSE's space on Circle to talk to Donald and other sellers looking to improve their craft. This episode is brought to you in part by Scratchpad. Scratchpad is the first Revenue Team Workspace specifically designed to adapt to each salesperson's workflow, so you don't have to change your habits. Get Scratchpad free at Scratchpad.com.  Credits As one of our podcast listeners, we value your opinion and always want to improve the quality of our show. Complete our two-minute survey here: thesalesevangelist.com/survey. We'd love for you to join us for our next episodes by tuning in on Apple Podcast, Google Podcast, Stitcher, or Spotify. 

Bayerische Unterhaltungsmusik der 1970er-Jahre erklingt heute in "Servus". Im Mittelpunkt steht der Akkordeonist, Komponist und Arrangeur Heinz Kulzer, der mit seinen Ensembles das Radioprogramm viele Jahre geprägt hat. Andreas Estner unterhält sich mit Irmi Schwab, die mit Heinz Kulzer musiziert hat, und Max Huber vom "Goldenen Tal" in Narring.

Today we explore the Self Determination Program in California with Kelly Kulzer-Reyes of Club 21. Eighteen states in the US have similar personalized programs that distribute state funds in a way to insure that people with disabilities have access to appropriate services throughout their lifetime. An extremely informative episode for those who want to have more control of the state services provided for their loved ones. Club 21: https://clubtwentyone.org Disability Voices United: https://disabilityvoicesunited.org Independent Facilitator groups: https://www.guidelightgroup.org/about-us https://www.neuronav.org/ https://www.allycs.org/  DDS website on Self Determination https://www.dds.ca.gov/initiatives/sdp/ Episode Transcript: https://ifweknewthen701833686.wordpress.com/2021/12/16/83-the-self-determination-learning-circle-at-club-21-with-kelly-kulzer-reyes/2/ Please follow us on Twitter @ifweknewthenPOD you can drop us a line on our Facebook page @ifweknewthenPOD or visit our website https://www.IfWeKnewThen.com to send us an email with questions and comments. You can join our mailing list there and get alerts of future podcast episodes. Thank you again and we look forward to you joining us on the next episode of IF WE KNEW THEN.

DARE to say NO to bad impressions the shirt! Order one today! (https://www.bonfire.com/dare-to-say-no-to-bad-impressions-shirt-1/) 100% of the profits go towards The Foundation for Dental Laboratory Technology (https://dentallabfoundation.org/) October 2021 Elvis and Barb FINALLY got to record at a LIVE event together for the first times since February 2020. Lucky it was at the Whip Mix Digital Forum (https://www.whipmix.com/special-events/2021-digital-forum/), a packed event full of fantastic speakers, vendors, and attendees that were super excited just to be out enjoying the dental lab industry. This first episode for the event has Elvis and Barb talking to the CEO of Whip Mix (https://www.whipmix.com/) herself, Anne Steinbock. Anne talks about the family history, her past jobs at the company and becoming CEO, and some great tales of Whip Mix past. Then we talk to Pat Higgins and Bryce Hiller about the new Whip Mix VeriONE Digital (https://www.verionedigital.com/) workflow for clinicians. This workflow, when announced, caused a lot of rumors and misinformation about what it was. Pat and Bryce come on to set the record straight on how it's actually a good thing for dental labs. Did you know that most inLab MCX5 users that have ordered burs from Gro3X once, keep on ordering Gro3X burs over and over again? Because Gro3X (https://www.gro3x.com/) burs are engineered by some of the folks who have been providing burs to some of the largest US production labs for years. Did you also know, that most Roland and DGShape users have no idea what they are missing out? To give Roland and DGSHAPE users the opportunity to find out for themselves how good Gro3X burs work also for their machines, Gro3X is now offering a BUY 3, GET 2 BURS FREE special. This is exclusively for Voices From The Bench listeners. Simply go to the Gro3X website at gro3x.com (https://www.gro3x.com/) click on burs (https://www.gro3x.com/collections/mill), then select Roland & DGSHAPE. Add five burs of your choice to your cart, click on CHECK-OUT, enter discount code B3G2Burs and check out. Whip Mix (https://www.whipmix.com/), known today for its digital equipment and materials, has been known for decades as a leader in occlusion products with its Whip Mix, Hanau, and Denar articulators and facebows (https://www.whipmix.com/product-overview/?product-cat=occlusion). The most popular of these is the Denar Mark 300 Series articulator. These popular semi-adjustable instruments are engineered for superior performance and tested thoroughly based on proven methodology. They bring a new standard of interchangeability with factory set accuracy within 20 microns. With their sleek, ergonomic design and powder-coated finish, these articulators have a contemporary look that's as durable as it is aesthetically pleasing. The Denmat Mark 320 articulator (https://www.whipmix.com/products/denar-mark-320-dental-articulator/) features Adjustable condylar inclination with 0 to 60,° and Progressive side shift fixed at 15°. The Denar Mark 300 comes complete with: Dust cover, 10 magnetic mounting plates, instructions and standard black carrying case. Head over to Whipmix.com to order one today. Have you seen the high prices of precious metal these days? They are close to record highs on gold and palladium. With those high precious metal prices, you are paying a high cost for your alloys. We know that you are using less Precious metal in your lab these days, but if you send in half of what you sent in 5 years ago ,your scrap return will be higher than it was 5 years ago ,because of the high PM prices . You owe it to yourself to find a trusted, reputable refining company. Look no further! Kulzer refining (https://www.kulzerus.com/en_us/en_us/heraeuspreciousmetalsrefining/scraprefining.aspx) has been tested, trusted and reputable for over 100 years. They burn, melt and assay all under one roof at their state-of-the-art refining facility in Wartburg Tennessee. They have doubled their production capacity to ensure your scrap return within 2 weeks. With all the non-precious material that has become present in today's restorations it is important that we ensure the assay sample is homogenous. At Kulzer (https://www.kulzerus.com/en_us/en_us/home_9/home.aspx), they take the extra step to X-ray the top and bottom after they melt the bar to make sure the precious metal percentages--- are the same. If not, copper is added until they are positive the bar is homogeneous. We know this step is very important to get a precise assay result. Their reimbursement to the customer is after our 10% refining fee. They have zero additional fees. If you need any free shipping containers, which contain a UPS prepaid, full insured label, please visit mydental360.com/refining or call the Director of Precious Metal Refining, Tony Circelli, directly at (914) 906-1843. Special Guests: Anne Steinbock, Bryce Hiller, and Pat Higgins.

When we discovered a Instagram account by a "gentleman" named @mrawwesome (https://www.instagram.com/mrawwesome/), we knew that he would be a interesting guest. Justin Gerard is a removable technician that tells it like it is. Entertaining and slightly offensive, Justin comes on the podcast to talk about getting into the industry, characters that help shape him in the profession, opening his own lab (Colonial Dental Lab (https://colonialdentallaboratories.com/)) with a partner, and starting his Instagram account to share his unique take on dental lab technology. 2022 NADL Vision 21 meeting: Las Vegas January 20 - 22 (https://nadl.org/events/v21/2022/) Whip Mix (https://www.whipmix.com/) is very excited to announce the new PRO 4K large format 3D printer from Asiga (https://www.whipmix.com/products/asiga-pro-4k/). The open-material printer for 385nm and 405nm resins features renowned Asiga reliability, and super-fast print mode for large batch printing of virtually all print resins. It's ideal for printing any kind of model, dentures, splints, surgical guides, impression trays and more. The Asiga Pro 4K DLP printer is affordable so you can own it for under $25,000. It has a large build plate and is available in both 65 micron and 46 micron resolution versions. For information about the Asiga Pro 4K, visit whipmix.com or call Chris Frye at (513) 680-1512. Gro3X (https://www.gro3x.com/) is a dental supply, service, and marketing company. It is to help dental labs, and especially small labs to lower their cost for supplies, provide business opportunities, and generate growth. They carry amazing zirconia burs and their “rainbow burs” for PMMA and TriLor are top-notch. They also carry zirconia from Aidite, a wide range of Harvest Dental products, and different 3D print resins. What's really cool about Gro3X (https://www.gro3x.com/) is, that you can join their Gro3X Family program (https://www.gro3x.com/collections/family/products/gro3x-family) for only 99 cents. This will then give you an additional 10% discount on all of their supplies and even their CAD/CAM design and fabrication services. Get a 3-months trial membership with Gro3X Family now for only $0.99 and receive 3 Shade Peg Shots - free of charge (https://www.gro3x.com/products/shade-peg-refills?variant=39371434524715). Just go to www.gro3x.com and add Gro3X Family to your cart, then add 3- Shade Peg Shots of 3cc each to your cart and go to check out, enter discount code VFTB for Voices From The Bench and check out. Have you seen the high prices of precious metal these days? They are close to record highs on gold and palladium. With those high precious metal prices, you are paying a high cost for your alloys. We know that you are using less Precious metal in your lab these days, but if you send in half of what you sent in 5 years ago ,your scrap return will be higher than it was 5 years ago ,because of the high PM prices . You owe it to yourself to find a trusted, reputable refining company. Look no further! Kulzer refining (https://www.kulzerus.com/en_us/en_us/heraeuspreciousmetalsrefining/scraprefining.aspx) has been tested, trusted and reputable for over 100 years. They burn, melt and assay all under one roof at their state-of-the-art refining facility in Wartburg Tennessee. They have doubled their production capacity to ensure your scrap return within 2 weeks. With all the non-precious material that has become present in today's restorations it is important that we ensure the assay sample is homogenous. At Kulzer (https://www.kulzerus.com/en_us/en_us/home_9/home.aspx), they take the extra step to X-ray the top and bottom after they melt the bar to make sure the precious metal percentages--- are the same. If not, copper is added until they are positive the bar is homogeneous. We know this step is very important to get a precise assay result. Their reimbursement to the customer is after our 10% refining fee. They have zero additional fees. If you need any free shipping containers, which contain a UPS prepaid, full insured label, please visit mydental360.com/refining or call the Director of Precious Metal Refining, Tony Circelli, directly at (914) 906-1843. Special Guest: Justin Gerard.

Rund 600.000 Menschen in Deutschland erkranken Jahr für Jahr an Diabetes - eine folgenschwere Entwicklung, denn die Krankheit erschwert nicht nur den Alltag, sondern kann teilweise richtig gefährlich werden.

When has anyone ever said life in a dental lab is easy? It's not. There are many struggles and challenges every day. Todd Blankenbecler and Andy Stark from EasyRX (https://easyrxcloud.com/) have a solution for a few of the issues. Easy Rx is a software that can run production in the lab, but it also has a clinician aspect that allows the two to communicate efficiently. Oh, did we mention that it can also prep your digital scans for model printing? They talk about how two different software companies combined, how they deal with the different business models, and what makes EasyRx stand out over the other production software. Denture Babes website (https://www.denturebabes.com/) The first 500 orders placed between November 1st and November 14th will all get a FREE LIMITED EDITION Metallic Voices From the Bench sticker! Swiss School of Prosthetics 2022 course dates! (https://www.ssop.swiss/en-us/all-dates-venues) Gro3X (https://www.gro3x.com/) is a dental supply, service, and marketing company. It is to help dental labs, and especially small labs to lower their cost for supplies, provide business opportunities, and generate growth. They carry amazing zirconia burs and their “rainbow burs” for PMMA and TriLor are top-notch. They also carry zirconia from Aidite, a wide range of Harvest Dental products, and different 3D print resins. What's really cool about Gro3X (https://www.gro3x.com/) is, that you can join their Gro3X Family program (https://www.gro3x.com/collections/family/products/gro3x-family) for only 99 cents. This will then give you an additional 10% discount on all of their supplies and even their CAD/CAM design and fabrication services. Get a 3-months trial membership with Gro3X Family now for only $0.99 and receive 3 Shade Peg Shots - free of charge (https://www.gro3x.com/products/shade-peg-refills?variant=39371434524715). Just go to www.gro3x.com and add Gro3X Family to your cart, then add 3- Shade Peg Shots of 3cc each to your cart and go to check out, enter discount code VFTB for Voices From The Bench and check out. There are 3D Print resins for models that do a decent job, then there is Whip Mix (https://www.whipmix.com/) VeriModel OS. Dr. Michael Scherer, a prosthodontist from Sonora, CA says “Whip Mix VeriModel OS is one of the finest model resins I have ever worked with. It's amazing”. The popular resins offer the dental laboratory a high quality, smooth surface finish, extreme precision, reliable accuracy, and fine detail. They can be used in 385 and 405 nanometer printers, and are compatible with silicone-base separators. VeriModel OS print resins are available in Ivory (https://www.whipmix.com/products/verimodel-os-ivory-dental-resin/), Golden Brown (https://www.whipmix.com/products/verimodel-os-golden-brown-dental-resin/), Grey (https://www.whipmix.com/products/verimodel-os-grey-dental-resin/), and White (https://www.whipmix.com/products/verimodel-os-white-dental-resin/) colors for any model application. For more information, call (800) 626-5651, or visit www.whipmix.com. Have you seen the high prices of precious metal these days? They are close to record highs on gold and palladium. With those high precious metal prices, you are paying a high cost for your alloys. We know that you are using less Precious metal in your lab these days, but if you send in half of what you sent in 5 years ago ,your scrap return will be higher than it was 5 years ago ,because of the high PM prices . You owe it to yourself to find a trusted, reputable refining company. Look no further! Kulzer refining (https://www.kulzerus.com/en_us/en_us/heraeuspreciousmetalsrefining/scraprefining.aspx) has been tested, trusted and reputable for over 100 years. They burn, melt and assay all under one roof at their state-of-the-art refining facility in Wartburg Tennessee. They have doubled their production capacity to ensure your scrap return within 2 weeks. With all the non-precious material that has become present in today's restorations it is important that we ensure the assay sample is homogenous. At Kulzer (https://www.kulzerus.com/en_us/en_us/home_9/home.aspx), they take the extra step to X-ray the top and bottom after they melt the bar to make sure the precious metal percentages--- are the same. If not, copper is added until they are positive the bar is homogeneous. We know this step is very important to get a precise assay result. Their reimbursement to the customer is after our 10% refining fee. They have zero additional fees. If you need any free shipping containers, which contain a UPS prepaid, full insured label, please visit mydental360.com/refining or call the Director of Precious Metal Refining, Tony Circelli, directly at (914) 906-1843. Special Guests: Andy Stark and Todd Blankenbecler.

We love to talk to people that are so passionate about dental labs that they take their unique weirdness and turn it into a business that gives other technicians exactly what they want. Jenelle Tabaković (https://www.instagram.com/jtlabqueen/) and MacKenzie Mayer (https://www.instagram.com/toothfairyknz/) are both removable technicians with different career paths. But they didn't like the options of clothing for dental technicians. After a lot of planning and hard work they have now created a huge following of technicians that share their passion, weirdness, and toothcreepness. They come on the podcast to talk about getting into the industry, meeting each other on Instagram, and building a business they both do out of love for their profession. Plus plenty of fart jokes. It's a lot of fun that no one should miss. Denture Babes website (https://www.denturebabes.com/) The first 500 orders placed between November 1st and November 14th will all get a FREE LIMITED EDITION Metallic Voices From the Bench sticker! Whip Mix (https://www.whipmix.com/) offers you the ultimate in ease, material flexibility and unattended production with the Roland DGA DWX-52DCi (https://www.whipmix.com/products/roland-dwx-52dci/) milling machine. The popular mill's automatic disc changer expands your lab production and profit, using a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and several other automated features. The DWX-52DCi dental milling machine now comes with performance visualization software and other intelligent updates. The 5-axis mill even knows which tool to automatically swap out when tools have reached their designated lifespan. Just power it on, let it go, and automatically and accurately mill numerous dental restoration jobs with complete unattended confidence. If you're interested in learning more about the Roland DGA DWX-52DCi, visit whipmix.com or call 800-626-5651. Gro3X (https://www.gro3x.com/) is a dental supply, service and marketing company that was founded by Norbert Ulmer and their goal is to help dental labs, and especially small labs to lower their cost for supplies, provide business opportunities, and generate growth. Attend their upcoming Gro3X Gem Talks on November 5th in Charlotte, NC (https://www.gro3x.com/collections/family/products/gro3x-gem-talks). Gro3X Gem Talks is an all day marketing symposium in Ted-Talk style featuring some 10+ lab speakers as they share their most relevant and practical marketing techniques. We will hear from Sasha der Avanessian from Harvest Dental (https://harvestdental.com/), Anne Kelzer from AMK Dental Lab (https://www.facebook.com/people/AMK-Dental-Lab/100028120884702/), Frankie Acosta from AA Dental Design (https://www.aadentaldesign.com/) and Ricki Braswell from Beyond Coaching (https://www.transitionbeyond.com/) and former Co-Executive Director of the NADL. All of them will talk about real marketing as it is done in their own labs and businesses every day. Register now at gro3x.com to take advantage of their early bird special of only $95. Enter discount code VFTB for Voices from The Bench and receive an extra 10% discount, just because you listen to this Podcast. Have you seen the high prices of precious metal these days? They are close to record highs on gold and palladium. With those high precious metal prices, you are paying a high cost for your alloys. We know that you are using less Precious metal in your lab these days, but if you send in half of what you sent in 5 years ago ,your scrap return will be higher than it was 5 years ago ,because of the high PM prices . You owe it to yourself to find a trusted, reputable refining company. Look no further! Kulzer refining (https://www.kulzerus.com/en_us/en_us/heraeuspreciousmetalsrefining/scraprefining.aspx) has been tested, trusted and reputable for over 100 years. They burn, melt and assay all under one roof at their state-of-the-art refining facility in Wartburg Tennessee. They have doubled their production capacity to ensure your scrap return within 2 weeks. With all the non-precious material that has become present in today's restorations it is important that we ensure the assay sample is homogenous. At Kulzer (https://www.kulzerus.com/en_us/en_us/home_9/home.aspx), they take the extra step to X-ray the top and bottom after they melt the bar to make sure the precious metal percentages--- are the same. If not, copper is added until they are positive the bar is homogeneous. We know this step is very important to get a precise assay result. Their reimbursement to the customer is after our 10% refining fee. They have zero additional fees. If you need any free shipping containers, which contain a UPS prepaid, full insured label, please visit mydental360.com/refining or call the Director of Precious Metal Refining, Tony Circelli, directly at (914) 906-1843. Special Guests: Jenelle Tabaković and MacKenzie Mayer.

They say behind every famous person is the true group that makes them famous. John Archibald has been the in-office dental technician to the famous Dr. Gordon Christensen (https://www.pccdental.com/). This gave John a chance to be on the forefront of a lot of new products and procedures. Seeing an opportunity to teach the lab industry, he started the country's only full time apprenticeship school. Raising his son Jed Archibald (https://www.archibalddigital.com/) in the school, Jed was soon teaching in the school and continuing the name in the industry as a leader with the development to the digital workflow. Clinicians Report (https://www.cliniciansreport.org/) Gro3X (https://www.gro3x.com/) is a dental supply, service and marketing company that was founded by Norbert Ulmer and their goal is to help dental labs, and especially small labs to lower their cost for supplies, provide business opportunities, and generate growth. Attend their upcoming Gro3X Gem Talks on November 5th in Charlotte, NC (https://www.gro3x.com/collections/family/products/gro3x-gem-talks). Gro3X Gem Talks is an all day marketing symposium in Ted-Talk style featuring some 10+ lab speakers as they share their most relevant and practical marketing techniques. We will hear from Sasha der Avanessian from Harvest Dental (https://harvestdental.com/), Anne Kelzer from AMK Dental Lab (https://www.facebook.com/people/AMK-Dental-Lab/100028120884702/), Frankie Acosta from AA Dental Design (https://www.aadentaldesign.com/) and Ricki Braswell from Beyond Coaching (https://www.transitionbeyond.com/) and former Co-Executive Director of the NADL. All of them will talk about real marketing as it is done in their own labs and businesses every day. Register now at gro3x.com to take advantage of their early bird special of only $95. Enter discount code VFTB for Voices from The Bench and receive an extra 10% discount, just because you listen to this Podcast. Whip Mix (https://www.whipmix.com/) offers you the ultimate in ease, material flexibility and unattended production with the Roland DGA DWX-52DCi (https://www.whipmix.com/products/roland-dwx-52dci/) milling machine. The popular mill's automatic disc changer expands your lab production and profit, using a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and several other automated features. The DWX-52DCi dental milling machine now comes with performance visualization software and other intelligent updates. The 5-axis mill even knows which tool to automatically swap out when tools have reached their designated lifespan. Just power it on, let it go, and automatically and accurately mill numerous dental restoration jobs with complete unattended confidence. If you're interested in learning more about the Roland DGA DWX-52DCi, visit whipmix.com or call 800-626-5651. Have you seen the high prices of precious metal these days? They are close to record highs on gold and palladium. With those high precious metal prices, you are paying a high cost for your alloys. We know that you are using less Precious metal in your lab these days, but if you send in half of what you sent in 5 years ago ,your scrap return will be higher than it was 5 years ago ,because of the high PM prices . You owe it to yourself to find a trusted, reputable refining company. Look no further! Kulzer refining (https://www.kulzerus.com/en_us/en_us/heraeuspreciousmetalsrefining/scraprefining.aspx) has been tested, trusted and reputable for over 100 years. They burn, melt and assay all under one roof at their state-of-the-art refining facility in Wartburg Tennessee. They have doubled their production capacity to ensure your scrap return within 2 weeks. With all the non-precious material that has become present in today's restorations it is important that we ensure the assay sample is homogenous. At Kulzer (https://www.kulzerus.com/en_us/en_us/home_9/home.aspx), they take the extra step to X-ray the top and bottom after they melt the bar to make sure the precious metal percentages--- are the same. If not, copper is added until they are positive the bar is homogeneous. We know this step is very important to get a precise assay result. Their reimbursement to the customer is after our 10% refining fee. They have zero additional fees. If you need any free shipping containers, which contain a UPS prepaid, full insured label, please visit mydental360.com/refining or call the Director of Precious Metal Refining, Tony Circelli, directly at (914) 906-1843. Special Guests: Jed Archibald and John Archibald.

Posterior Composites – Tips & Tricks Episode #346 with Dr. Lee Ann Brady Today, Dr. Lee Ann Brady from The Pankey Institute shares some of her favorite and must-try techniques for posterior composites. From her favored isolation systems to the many uses for plumber's tape, she has a variety of advice to improve your dentistry today! To hear this expert's tips, tricks, and techniques for creating the best, aesthetic composites, listen to Episode 346 of The Best Practices Show! Main Takeaways: Patients find Isolite to be a comfortable form of isolation. ReLeaf isolation works best on patients with strong gag reflexes. Rubber dams might make a comeback peri-Covid for aerosol prevention. Ivoclar's OptraDam is the kinder, gentler version of a rubber dam. Retraction pastes are probably the best hemostatic agents in all of dentistry. Pre-wedge every time for a successful matrix. Teflon tape has multiple uses in dentistry. Prep scrub every tooth you prep to prevent sensitivity and reduce bond degradation. Be cautious about mixing and matching universal adhesives. Composite warmers will transform your life. To prevent cross-contamination between patients, don't reuse composites in the warmer. Quotes: “One of the biggest challenges we have when we do adhesive dentistry of any kind, direct or indirect, is managing contaminants, isolation — so, water, saliva, red blood cells, all of the contaminants that are automatically in the oral environment, and then some of the ones that we introduce through our handpiece. And they're actually not our friend when it comes to optimum adhesives, and we want to try to manage that.” (03:35—04:01) “I love working with an Isolite. Most of my patients find it really comfortable once you get it in and get it in position. And they prefer it over having to hope they're staying open wide enough for you or worrying about their tongue. It actually really does do a great job at managing isolation from a standpoint of moisture in the oral environment, managing aerosols.” (04:31—04:55) “I can't use [Isolite] on everybody. And so, the other device that you see listed on the picture is called ReLeaf, and it comes from a company named Kulzer. They're the people who make Ivory Rubber Dam materials. And I use ReLeaf for a couple of different scenarios. One is, somebody posted in the chat, ‘What about patients with a really strong gag reflex?' This will work much better because you're not putting any pressure or contacting the tongue. And it also works really well for patients at high functional risk.” (05:24—05:58) “If you get the ReLeaf, get one for your hygiene department as well, because it's probably the best thing that we can think about from a standpoint of using an ultrasonic.” (07:43—07:57) “Rubber dams are one of these things that most of us were super glad that we were able to leave behind when we left dental school. And then, there are other people who say, ‘I do all my dentistry under a rubber dam. I do think that thinking about going back to rubber dam isolation may be on people's radar screen after we get back in our offices, simply because of the fact that it does isolate us from the patient's oral environment, and it does prevent aerosols.” (08:42—09:12) “[The Ivoclar OptraDam is] actually what I call the kinder, gentler version of a rubber dam. Why is it the kinder, gentler version? Well, a couple of reasons. Number one, everything all comes together so you don't need to know where the frame is and sterilize it and find the dam material. It also isn't a flat piece of rubber dam, so it literally is the shape of the back of the mouth. And because it's not under tension, you don't need a rubber dam clamp. And if you don't use a clamp, you don't need palatal anesthesia on the maxillary, and you don't need long buccal anesthesia on the mandibular. It's already got the little holes punched in it, so you literally just punch the holes with your rubber dam punch.” (09:26—10:07)...

Check out A Very Dental Podcast: Shorts: Everyone Sucks at Their Job (except Elvis) (https://verydentalpodcast.com/episode/shorts-everyone-sucks-at-their-job-except-elvis) This week we welcome John Wilson from Sunrise Dental Laboratory (http://www.sunrisedentallab.com/) out in California to the podcast. He has been at this lab game for a while. Early on he saw the importance of putting his lab on the front line of implant restorations. John comes on the podcast to talk about his early days as a punk kid, mistakes he's made, and more importantly the lessons he has learned. It's just an added bonus that he shares the lessons in hope that he can prevent some others from making the same mistake. Whip Mix (https://whipmix.com/) is now providing its milling customers with Prima Milling Tools (https://whipmix.com/products/prima-milling-tools/), the high performance milling tools engineered specifically for Roland mills. This new tool range outperforms the competition. The results show not only that the tools last 29% longer than most others, their precision creates pin-point accuracy, ensuring a perfect fit for the patient. The uncoated tools save up to 40% per restoration over the market leaders, VISIT WHIPMIX.COM OR CALL (800) 626-5651 to get yours today! Gro3X (https://www.gro3x.com/) is a dental supply, service and marketing company that was founded by Norbert Ulmer and their goal is to help dental labs, and especially small labs to lower their cost for supplies, provide business opportunities, and generate growth. Attend their upcoming Gro3X Gem Talks on November 5th in Charlotte, NC (https://www.gro3x.com/collections/family/products/gro3x-gem-talks). Gro3X Gem Talks is an all day marketing symposium in Ted-Talk style featuring some 10+ lab speakers as they share their most relevant and practical marketing techniques. We will hear from Sasha der Avanessian from Harvest Dental (https://harvestdental.com/), Anne Kelzer from AMK Dental Lab (https://www.facebook.com/people/AMK-Dental-Lab/100028120884702/), Frankie Acosta from AA Dental Design (https://www.aadentaldesign.com/) and Ricki Braswell from Beyond Coaching (https://www.transitionbeyond.com/) and former Co-Executive Director of the NADL. All of them will talk about real marketing as it is done in their own labs and businesses every day. Register now at gro3x.com to take advantage of their early bird special of only $95. Enter discount code VFTB for Voices from The Bench and receive an extra 10% discount, just because you listen to this Podcast. Have you seen the high prices of precious metal these days? They are close to record highs on gold and palladium. With those high precious metal prices, you are paying a high cost for your alloys. We know that you are using less Precious metal in your lab these days, but if you send in half of what you sent in 5 years ago ,your scrap return will be higher than it was 5 years ago ,because of the high PM prices . You owe it to yourself to find a trusted, reputable refining company. Look no further! Kulzer refining (https://www.kulzerus.com/en_us/en_us/heraeuspreciousmetalsrefining/scraprefining.aspx) has been tested, trusted and reputable for over 100 years. They burn, melt and assay all under one roof at their state-of-the-art refining facility in Wartburg Tennessee. They have doubled their production capacity to ensure your scrap return within 2 weeks. With all the non-precious material that has become present in today's restorations it is important that we ensure the assay sample is homogenous. At Kulzer (https://www.kulzerus.com/en_us/en_us/home_9/home.aspx), they take the extra step to X-ray the top and bottom after they melt the bar to make sure the precious metal percentages--- are the same. If not, copper is added until they are positive the bar is homogeneous. We know this step is very important to get a precise assay result. Their reimbursement to the customer is after our 10% refining fee. They have zero additional fees. If you need any free shipping containers, which contain a UPS prepaid, full insured label, please visit mydental360.com/refining or call the Director of Precious Metal Refining, Tony Circelli, directly at (914) 906-1843. Special Guest: John Wilson.

Conversa à Bancada: a dental laboratory podcast out of Portugal (https://podcasts.apple.com/us/podcast/conversa-%C3%A0-bancada/id1564666913) Join Elvis and Barb at the Whip Mix Digital Forum October 29 & 30 in Louisville, Ky (https://www.whipmix.com/special-events/2021-digital-forum/) When you hear of people consulting in our industry, you would hope that they spent some time in our industry doing what they are "consulting". David Avery has done it all. Classically trained in school, worked in-house for a prosthodontist, owned his own lab, and help grow one of the largest labs on the east coast. David talks about the people who have influenced him along the way, how our profession has changes over the years, and what labs and technicians can do to prepare themselves for success in the coming years. Gro3X (https://www.gro3x.com/) is a dental supply, service and marketing company that was founded by Norbert Ulmer and their goal is to help dental labs, and especially small labs to lower their cost for supplies, provide business opportunities, and generate growth. Attend their upcoming Gro3X Gem Talks on November 5th in Charlotte, NC (https://www.gro3x.com/collections/family/products/gro3x-gem-talks). Gro3X Gem Talks is an all day marketing symposium in Ted-Talk style featuring some 10+ lab speakers as they share their most relevant and practical marketing techniques. We will hear from Sasha der Avanessian from Harvest Dental (https://harvestdental.com/), Anne Kelzer from AMK Dental Lab (https://www.facebook.com/people/AMK-Dental-Lab/100028120884702/), Frankie Acosta from AA Dental Design (https://www.aadentaldesign.com/) and Ricki Braswell from Beyond Coaching (https://www.transitionbeyond.com/) and former Co-Executive Director of the NADL. All of them will talk about real marketing as it is done in their own labs and businesses every day. Register now at gro3x.com to take advantage of their early bird special of only $95. Enter discount code VFTB for Voices from The Bench and receive an extra 10% discount, just because you listen to this Podcast. The Asiga MAX (https://whipmix.com/products/asiga-max/), the world's most advanced lab 3D printer, offers exceptional productivity. Well over 400 labs in the U.S. can attest to its accuracy, speed and precision. With 62 micron Print Precision, the Max is optimized for both dental lab or clinic environments. Its exclusive SPS™ Smart-Positioning-System Technology guarantees every layer is formed accurately, resulting in consistent results in any environment, and its single Point Calibration makes calibration extremely accurate and fast. As an Open Material System, you can print any suitable resin from any material manufacturer. Your choice, no strings. The Max also features the Fastest Material Changeover of any 3D printer. Labs LOVE this! Change completely from one print resin to another in under 30 seconds. All this and the finest, most dependable technical support staff in the dental lab industry. Call Whip Mix today or visit whipmix.com (https://whipmix.com/) to find out more about the Asiga Max! Have you seen the high prices of precious metal these days? They are close to record highs on gold and palladium. With those high precious metal prices, you are paying a high cost for your alloys. We know that you are using less Precious metal in your lab these days, but if you send in half of what you sent in 5 years ago ,your scrap return will be higher than it was 5 years ago ,because of the high PM prices . You owe it to yourself to find a trusted, reputable refining company. Look no further! Kulzer refining (https://www.kulzerus.com/en_us/en_us/heraeuspreciousmetalsrefining/scraprefining.aspx) has been tested, trusted and reputable for over 100 years. They burn, melt and assay all under one roof at their state-of-the-art refining facility in Wartburg Tennessee. They have doubled their production capacity to ensure your scrap return within 2 weeks. With all the non-precious material that has become present in today's restorations it is important that we ensure the assay sample is homogenous. At Kulzer (https://www.kulzerus.com/en_us/en_us/home_9/home.aspx), they take the extra step to X-ray the top and bottom after they melt the bar to make sure the precious metal percentages--- are the same. If not, copper is added until they are positive the bar is homogeneous. We know this step is very important to get a precise assay result. Their reimbursement to the customer is after our 10% refining fee. They have zero additional fees. If you need any free shipping containers, which contain a UPS prepaid, full insured label, please visit mydental360.com/refining or call the Director of Precious Metal Refining, Tony Circelli, directly at (914) 906-1843. Special Guest: David Avery AS, CDT, TE.

Every lab is looking for technicians. We all know about the lack of talent in the employee pool. What can we do about it? One man outside of London is attempting to help technicians and labs "hook up". Andy Foster comes on the podcast to talk about running his one person lab while at the same time running his website recruit4technicians.com (https://recruit4technicians.com/). This site is dedicated to our industry. If you are a technician looking for a career or are a lab looking for your next employee, this is an ideal place to post. Andy also talks about some interesting things he has noticed in our industry, some great ideas for labs when looking, and also some great ideas for technicians when looking for their next "home away from home". Great stuff for everyone in our industry. Check out Andy's Blog for more great resources for both the lab and the technicians. (https://recruit4technicians.com/blog/) Whip Mix (https://whipmix.com/) is pleased to add VeriCast OS (https://whipmix.com/products/vericast-generative-resin/), a burnout pattern print resin, to Whip Mix's growing Veri Brand Resin offering. VeriCast OS works with LCD and DLP printers in both 385 and 405 nanometer wavelengths. It prints accurate and detailed crowns, bridges, substructures, and RPD frameworks, is durable, and leaves no ash or residue. Since it burns out cleanly, VeriCast OS is ideal for investment casting and ceramic pressing. For optimal results, we recommend Whip Mix ResinVest (https://whipmix.com/products/resinvest-investment/), which is a phosphate investment made specifically for burning out printed or milled resin patterns. Visit whipmix.com to learn more about VeriCast OS or any of Whip Mix's other 3D Print Resins. Gro3X (https://www.gro3x.com/) is a dental supply, service and marketing company that was founded by Norbert Ulmer and their goal is to help dental labs, and especially small labs to lower their cost for supplies, provide business opportunities, and generate growth. Attend their upcoming Gro3X Gem Talks on November 5th in Charlotte, NC (https://www.gro3x.com/collections/family/products/gro3x-gem-talks). Gro3X Gem Talks is an all day marketing symposium in Ted-Talk style featuring some 10+ lab speakers as they share their most relevant and practical marketing techniques. We will hear from Sasha der Avanessian from Harvest Dental (https://harvestdental.com/), Anne Kelzer from AMK Dental Lab (https://www.facebook.com/people/AMK-Dental-Lab/100028120884702/), Frankie Acosta from AA Dental Design (https://www.aadentaldesign.com/) and Ricki Braswell from Beyond Coaching (https://www.transitionbeyond.com/) and former Co-Executive Director of the NADL. All of them will talk about real marketing as it is done in their own labs and businesses every day. Register now at gro3x.com to take advantage of their early bird special of only $95. Enter discount code VFTB for Voices from The Bench and receive an extra 10% discount, just because you listen to this Podcast. Have you seen the high prices of precious metal these days? They are close to record highs on gold and palladium. With those high precious metal prices, you are paying a high cost for your alloys. We know that you are using less Precious metal in your lab these days, but if you send in half of what you sent in 5 years ago ,your scrap return will be higher than it was 5 years ago ,because of the high PM prices . You owe it to yourself to find a trusted, reputable refining company. Look no further! Kulzer refining (https://www.kulzerus.com/en_us/en_us/heraeuspreciousmetalsrefining/scraprefining.aspx) has been tested, trusted and reputable for over 100 years. They burn, melt and assay all under one roof at their state-of-the-art refining facility in Wartburg Tennessee. They have doubled their production capacity to ensure your scrap return within 2 weeks. With all the non-precious material that has become present in today's restorations it is important that we ensure the assay sample is homogenous. At Kulzer (https://www.kulzerus.com/en_us/en_us/home_9/home.aspx), they take the extra step to X-ray the top and bottom after they melt the bar to make sure the precious metal percentages--- are the same. If not, copper is added until they are positive the bar is homogeneous. We know this step is very important to get a precise assay result. Their reimbursement to the customer is after our 10% refining fee. They have zero additional fees. If you need any free shipping containers, which contain a UPS prepaid, full insured label, please visit mydental360.com/refining or call the Director of Precious Metal Refining, Tony Circelli, directly at (914) 906-1843. Special Guest: Andy Foster.

Prior to his team's first conference clash of the 2021 season with Franklin Pierce University, American International College (AIC) interim head coach Kris Kulzer joined Matt Noonan for a brand new Noontime Sports Podcast to discuss his team's 2-0 start, which included a dramatic (and yes exciting, too) come-from-behind victory last week against Pace University. Kulzer and Noonan also chat about the Yellow Jackets' mindset for the 2021 season after finishing with just four wins in 2019, as well as how his team has been able to be so successful thus far on the road. Stay connected with Noontime Sports on Facebook, Twitter, and YouTube, as well as Instagram at @NoontimeNation --- This episode is sponsored by · Anchor: The easiest way to make a podcast. https://anchor.fm/app Support this podcast: https://anchor.fm/noontime-sports/support

Dental podcast: Welcome to DentalTalk. I'm Dr. Phil Klein. Today we'll be discussing different types of composites for various restorations. Our guest is Shannon Pace Brinker, an International Speaker, Author and Dental Assistant for over 32 years. Shannon has taught over 60K dental assistants across the US and Canada and is arguably the most well known and respected dental Assistant in North America.

Dental podcast: Welcome to DentalTalk. I'm Dr. Phil Klein. Today we'll be discussing hypersensitivity and the steps to help minimize this uncomfortable and sometimes painful condition associated with placing composite restorations. Our guest is Shannon Pace Brinker, an International Speaker, Author and Dental Assistant for over 32 years. Shannon has taught over 60K dental assistants across the US and Canada and is arguably the most well known and respected dental Assistant in North America.

Dental podcast: Welcome to DentalTalk. I'm Dr. Phil Klein. Today we'll be discussing traditional impression taking and impression materials. Our guest is Shannon Pace Brinker, an International Speaker, Author and Dental Assistant for over 32 years. Shannon has taught over 60K dental assistants across the US and Canada and is arguably the most well known and respected dental Assistant in North America.

Dental podcast: Welcome to DentalTalk. I'm Dr. Phil Klein. Today we'll be discussing how to maintain a Dry Field including isolation from aerosols. Our guest is Shannon Pace Brinker, an International Speaker, Author and Dental Assistant for over 32 years. Shannon has taught over 60K dental assistants across the US and Canada and is arguably the most well known and respected dental Assistant in North America.

Folge 17 stellt euch mal wieder einen Deutschen Meister vor. Armin Dollinger hat in seiner Karriere viel erlebt und beginnt nun mit seinem neuen Partner Paul Becker einen neuen Abschnitt! Die Gerüchte um die Arrangements im ehemaligen Team Dollinger/Kulzer sind genauso Thema wie der Überraschungstitel mit Clemens Wickler. Optimale Einstimmung auf das erste Turnier am Wochenende. In dieser Folge zu Gast: Armin Dollinger Folgt auch: Maximum Beachvolleyball Beachteam Becker/Dollinger

Happy 100th Episode!!! On today's episode we sit down with Eric Lutz, Brian Murray & Lyndsie Kulzer We talked about a ton of silly things, broke into song a few times, and tried to make each other laugh as much as possible. Thanks to everyone that has tuned in and been a part of Earsapce thus far.. Cheers to another 100 episodes!Music Used-Intro- Do what I want Birdcloud Outro-Peterframpton-Brian Byron & Eric 

This episode is straight FIRE. Are you ready for this? Today we sit down with the amazing Shelby Kulzer to talk about what it means to actually live life a your true, authentic self, and follow your intuition. Shelby is truly one of the most authentic, real, raw, and inspirational people I have ever met. She truly lives life to the fullest and is an amazing example of saying goodbye to the good to go for the great. Shelby helps entrepreneurs turn their ideas and gifts into a business. Through her work with 1:1 coaching, energy work, and her podcast, Shelby has mentored hundreds of women to see success in their own lives deemed off their OWN desires, not societies. Beyond that, seeing Shelby's growth as a person the last five years is truly unbelievable. On this episode Shelby shares her own journey of self-growth and following her intuition. She shares how she left her job as a registered dietitian to start her own business, move across the country, meet her soulmate, and help other women follow their knowing to bigger and better things! You are going to be SO inspired and ready to take action after listening to this one! You can follow Shelby on Instagram at: https://instagram.com/xo.shelbyrose?igshid=1ik2l7hzk0jvu You can listen to her podcast at: https://podcasts.apple.com/us/podcast/raise-your-vibration/id1449050659 You can connect with Shelby via her website: https://shelby-kulzer.mykajabi.com

What started as a side job selling wireless modems eventually led to Tom Kulzer creating the world’s first email automation tool, AWeber. As demand grew, he assembled a team and they built a business infrastructure to support the fast growth. 20 years later, over 1 million small businesses have used AWeber. 100,000 of them are active customers. In this episode, Tom provides the processes that laid the foundation for this scaling success story. Visit https://businessinfrastructure.tv/, Ep. 115 for show notes.

Dental podcast hosted by Dr. Phil Klein: This Viva Podcast will discuss universal dentin adhesives and their advantages. Our guest is Dr. Lee Ann Brady, Director of Education for the Pankey Institue and a dedicated educator who also maintains a private practice in Glendale Arizona.

Dental podcast hosted by Dr. Phil Klein: This Viva Podcast will discuss how to get exquisite diagnostic impressions using VPS materials. Our guest is Dr. Lee Ann Brady, Director of Education for the Pankey Institue and a dedicated educator who also maintains a private practice in Glendale Arizona.

Dental podcast hosted by Dr. Phil Klein: This Viva Podcast will discuss the use and clinical indications of opaque composites. Our guest is Dr. Lee Ann Brady, Director of Education for the Pankey Institue and a dedicated educator who also maintains a private practice in Glendale Arizona.

Dental podcast hosted by Dr. Phil Klein: This Viva Podcast will discuss isolation from aerosols and how to maximize the quality of your bonded restorations. Our guest is Dr. Lee Ann Brady, Director of Education for the Pankey Institue and a dedicated educator who also maintains a private practice in Glendale Arizona.

LAST TIME WE BEG VOTE for Voices From the Bench as the best dental podcast of 2019! VOTE HERE! (https://dentalpodcast.org/vote-for-your-favorite-dental-podcast-of-2019/) When we record at events and conventions, we talk to a lot of great people in our industry. Some of them sit down to chat. Sometimes we have to put a few together to get all the conversation out so we can release the ones we got at other events. There are just too many amazing people in dental laboratory technology and these three are no exception. First up we talk with Robert Gitman from NDX Thayer who talks about getting into the business from consulting and work at a lab that joins the NDX family. Then we talk to Bruce Barrish from Colonial Dental Lab. Bruce should consider stand-up comedy he's so funny. Bruce talks about his early days and how his lab markets using education. And the whole episode wraps up talking to previous lab owner tuned vendor speaker Jeremy Wohlers from Kulzer. Jeremy was presenting at LMT Lab Day East about creating digital dentures using the Pala system. Vision 21 Jan 16-18, 2020 - LAS VEGAS - Palms Casino Resort & Spa (https://nadl.org/events/v21/2020/) If you have never been to the meeting get in touch with the NADL to get a special discounted rate. Either by phone at (800) 950-1150 or by email at meetings@nadl.org and tell them you heard about the Vision 21 Meeting from Voices From the Bench and you will get a special rate of almost $200 off the regular attendee price. Voices of Dentistry Podcast Summit Jan 24 & 25, 2020 - SCOTTSDALE - Hilton Scottsdale Resort & Villas (https://voicesofdentistry.com/) Thanks to our good friends at Kettenbach (http://www.kettenbachusa.com/) LMT Lab Day Chicago - Feb 20 - 22, 2020 - Hyatt Regency Chicago (https://lmtmag.com/lmtlabday) Don't miss the biggest dental laboratory show of the year! This one will be EPIC! A special BIG thanks to our sponsors: Are you still doing full arch zirconia restorations? Why? There is a alternative that is better for your lab, the doctor, and the patients. Be sure to check out the AMAZING Nanoceramic Crystal Ultra® (https://crystalultra.com/voices/) from Digital Dental (https://digitaldental.com/). A Crystal Ultra arch is 60% lighter than a Zirconia arch; is easily adjusted chairside; and can be milled on a 1 to 1 basis with no sintering required! Do you want to get into digital dentures? Unsure of how to start? Worried about being FDA compliant? Why not use a already trusted company to be your partner. Whip Mix has put together a system that consists of a validated process using Dentca resins (https://whipmix.com/products/dentca/), which are the first FDA-cleared printed denture materials, an Asiga 3D printer (https://whipmix.com/products/asiga-max/) and the UViTRON UV curing light (https://whipmix.com/products/uvitron-uv-curing-unit/). Using these 3 elements together is fast, easy, and assures the dentist and the patient of a reliably predictable fit. Special Guests: Bruce Barrish, Jeremy Wohlers CDT, and Robert Gitman.

Wir sprachen mit Helmut Prieschenk und Johann Kulzer von WITRON sowie Thomas Visti von Mobile Industrial Robots. Prieschenk und Kulzer haben nicht nur das Logistikzentrum im Blick, sondern mittlerweile auch die Supply Chain. Thomas Visti entwickelt autonome Roboter. Spannend: Die AI Kamera und das schnelle Training der Roboter.

Dental podcast hosted by Dr. Phil Klein: This Viva Podcast will discuss why maintaining a dry field is so important during restorative procedures. Our guest is Dr. Lee Ann Brady, Director of Education for the Pankey Institue and a dedicated educator who also maintains a private practice in Glendale Arizona.

Dental podcast hosted by Dr. Phil Klein: This Viva Podcast will discuss how to reduce and prevent hypersensitivity following restorative procedures. Our guest is Dr. Lee Ann Brady, Director of Education for the Pankey Institue and a dedicated educator who also maintains a private practice in Glendale Arizona.

Dental podcast hosted by Dr. Phil Klein: This Viva Podcast will discuss adhesive dentistry and the benefits of using self-etch, total-etch and universal adhesives.Our guest is Dr. Lee Ann Brady, Director of Education for the Pankey Institue and a dedicated educator who also maintains a private practice in Glendale Arizona.

Dental podcast hosted by Dr. Phil Klein: This Viva Podcast will discuss composite materials and how does filler content and particle size play into your composite choice. Our guest is Dr. Lee Ann Brady, Director of Education for the Pankey Institue and a dedicated educator who also maintains a private practice in Glendale Arizona.

In this week’s episode I sat down with an up and coming young dentist in the Netherlands Dr. Maarten De Beer. Maarten is a very active member of the dental Instagram community, a columnist for Dentista magazine, opinion leader for Kulzer and is particularly interested in advanced restorative dentistry. He also runs rubber dam courses in Europe. In this episode we chat about the state of dentistry in the Netherlands, Maarten’s path through dental school and working as an associate and of course restorative and rubber dam dentistry. It is interviews like that that bring me back to the core value of why I started this podcast, the opportunity to speak with young dentists from around the world and give them a platform to share their experiences, struggles, wins is such a privilege. So I hope you guys really enjoy this interview. Dr. Maarten De Beer’s Details: Website: https://www.thedentaldutchman.com/ Instagram: @thedentaldutchman Links from the Episode: Dr. Łukasz Lassmann Course: http://master-level.pl/en/ Dr. Belograd Course: http://master-level.pl/en/ Sponsor Details: Henry Schein Halas:  https://henryschein.com.au Are you looking for ways to save money in your practice, but not really sure where to start? Look no further, Henry Schein360 has taken care of all this for you. Your benefits begin with a 4.5% cash rebate each month on everything you buy at Henry Schein (excluding large equipment), and you can access an average of 15% discount off products you use every day. Now, here is the most exciting part – Henry Schein360 has teamed up with businesses you deal with daily so you can save thousands every year. Our Program Partners cover areas such as practice analytics, website design, credit card merchant fees, online marketing and inventory management. Contact your Henry Schein Territory Manager to find out how to join. Podcast Details If you’ve been enjoying the Noobie Dentist podcast please be sure to rate us on iTunes and leave a review! If you have any feedback or questions or just want to get in touch you can find me on Instagram @noobiedentist The NoobieDentist podcast is now available on Spotify, youtube, noobiedentist.com, apple podcast app, stitcher and any other podcast apps out there!http://www.noobiedentist.com @noobiedentist on Instagramhttps://www.youtube.com/channel/UCu90HU1-gBJK1Pkz61OQaQA Noobie Dentist Study Club on Facebookhttps://www.facebook.com/groups/noobiedentistSC/  

Shelby Kulzer - spiritual life & biz coach, retreat leader, registered dietician, & all around wonderful human being - joins me today on the podcast to talk all about creating friendships with DEPTH.  We talk about: 1. How to find the right people to have these deep relationships with 2. How you can only get as deep with someone as you've gotten with yourself 3. How every relationship in your life serves a purpose or teaches you something 4. How to cultivate depth within your relationships & communicate your needs Find Shelby on Insta @shelby.set.free, & more info about her retreat: https://shelby-kulzer.mykajabi.com/retreat SHOW NOTES w/ reflection questions: https://jstreez.com/002

Welcome to July! As we start the first full month of summer, we bring you 4 interviews we got in Florida where it is always seems to be summer. Back in May Elvis and Barb were down in Barb's home state of Florida at the FDLA Symposium. This episode we sit down with: Chris Peterson CDT from Peterson Dental Laboratory talks about his family owned lab and what he gets out of sitting on the board of the FDLA. Gail Perricone from GPS Dental Laboratory talks about being a lab owner, a past president of the FDLA, and a new Carbon printer owner. David Sklarski from Laboratory Distribution Network (https://laboratorydistributionnetwork.com/) talks about how he came up with an interesting concept of utilizing the lab to be the technical help for products that are marketed to dentist. Let's be honest, we already are doing it now. Berdine Proctor from Kulzer talks about shifting careers to dental, working for Kulzer, and their Cara 4.0 printer and denture design software. Here is a link to the webinar she mentioned: https://cdeworld.com/webinars/21401-DigitalDentureDesignForBeginners Learn more about Pala Digital Dentures: The website is: www.paladesignstudio.com This is to create an account. If it is just 1 user that will be using this I suggest to choose individual. ( please note it may take 24-48 hours for your login to be active) Important information regarding the Pala Digital Dentures only: Service or support questions: Phone: 800-431-1785 (select option 2) Email: paladigital@kulzer-dental.com http://dentallabfoundation.org/wp-content/uploads/2018/12/RFF-6.0-Logo-1.jpg Support the Foundation For Dental Laboratory Technology (http://dentallabfoundation.org/) by supporting the Race For the Future 6.0 (http://dentallabfoundation.org/news-events/race-future-6-0/). Order a VFTB Special Edition shirt and all profits will go toward this wonderful event to raise money for education within our industry. https://www.bonfire.com/voices-from-the-benchrace-for-the-future-60/ We also dare all to participate in this year’s triathlon August 24 - 25, 2019 in Chicago. https://www.chicagotriathlon.com/ Special Guests: Berdine Proctor, Chris Peterson CDT, David Sklarski, and Gail Perricone.

EP:06 Fillin yo cup & Rasin yo vibe w/ Shelby Kulzer In this episode I jam out with my girl Shelby Kulzer, a registered dietician and spiritual coach. She coaches on business, life, she hosts retreats, has her own podcast (Raise Your Vibration!) and is living her most aligned life We talk all things: ⚡️Chakra ⚡️Nutrition ⚡️Reiki ⚡️Mindset ⚡️Authenticity Links from the show: Dirty Dozen & Clean Fifteen: https://www.ewg.org/foodnews/dirty-dozen.php Find Shelby on Instagram @shelby.set.free & over on her website shelbysetfree.com A gift from Shelby to YOU: Snag your free Raise Your Vibration guide on her website! (shelbysetfree.com)

 I am so excited for you guys to get to know my good friend Shelby! Shelby is a high vibe dietitian, life and business coach. She is an incredible light worker in this world. Today we chat on health, nutrition and eating high vibration foods. We talk all about being in and out of alignment and the importance of daily practices and rituals. She has so much great wisdom to give and I hope you enjoy this episode as much as I did! You can follow Shelby on her IG @shelby.set.free listen to her podcast the Raise Your Vibration podcast and on her website https://shelbysetfree.com/home where she is offering a free High Vibe Guide! 

In this episode I share a conversation with Shelby Kulzer. Shelby is a registered dietitian as well as a life and wellness coach. We connected over on instagram and really clicked. So after the first conversation we had, where she interviewed me for her podcast Raise Your Vibration, I asked her to come over for another epic conversation on Heart Space!In this episode we talk about: how she knew she wasn't on the right path working as a registered dietitian; childhood wounds & inner child work + why it’s so important; the importance of doing the inner work when it comes to manifesting your desires; the role of the subconscious in manifestation; not letting fear in the way of your dreams & allowing the fear to be there but going after your dreams anyway; how it feels like to live in alignment and her tips to be more aligned; how to protect your energy from energetically draining people. And so much more!Show notes:Shelby on Instagram: @Shelby.Set.FreeShelby’s podcast: Raise Your VibrationEpisode 20 of Raise Your Vibration Podcast: Connecting with Your Inner Guide with Sarah LewisShelby's Become Magnetic Facebook GroupBook: Big Magic by Elizabeth GilbertBook: The Universe Has Your Back by Gabrielle BernsteinFind me on InstagramWork with meThe Heart Space Private Facebook Group

We are pleased to bring back the Roundtable from last week to finish the discussion on 3D printing. The fantastic guests are: Tony Prestipino- Artifex Dental Laboratories in Washington DC Carbon M2D (https://www.carbon3d.com/) Michael Tanaka-Tanaka Dental Lab in Torrance, CA Carbon (https://www.carbon3d.com/) Kulzer Cara (https://www.kulzer.com/en/int/cad_cam_5/3d_printer/cara_print.aspx) Stratasys Object 30 (https://www.stratasys.com/3d-printers) Ken Kincaid –Bismarck/Mandan Dental Lab in Bismarck, North Dakota BEGO Varseo (https://usa.bego.com/3d-printing/3d-printer/3d-printer-varseo-s/) MiiCraft (https://3ddds.net/3d-printers/) Ackuretta Diplo (https://3ddds.net/3d-printers/) Laura Sanders, MDT - Studio32 Dental Arts in Amarillo, TX BEGO Varseo (https://usa.bego.com/3d-printing/3d-printer/3d-printer-varseo-s/) Whipmix Asiga Max (https://whipmix.com/products/asiga-max/) Contact Nowak Dental Supplies at 800-654-7623 or at nowakdental.com for all your laboratory needs. Tell them you heard them here on Voices From the Bench! Nowak Dental Supplies (https://www.nowakdental.com/) Special Guests: Ken Kincaid CDT, TE, Laura Sanders, MDT, CDT, Michael Tanaka, and Tony Prestipino, CDT.

Four different technicians from four different labs gather together to talk about 3d printing. We talk about equipment, resins, and workflow and how it has impacted their labs and lives. Joining us are: Tony Prestipino- Artifex Dental Laboratories in Washington DC Carbon M2D (https://www.carbon3d.com/) Michael Tanaka-Tanaka Dental Lab in Torrance, CA Carbon (https://www.carbon3d.com/) Kulzer Cara (https://www.kulzer.com/en/int/cad_cam_5/3d_printer/cara_print.aspx) Stratasys Object 30 (https://www.stratasys.com/3d-printers) Ken Kincaid –Bismarck/Mandan Dental Lab in Bismarck, North Dakota BEGO Varseo (https://usa.bego.com/3d-printing/3d-printer/3d-printer-varseo-s/) MiiCraft (https://3ddds.net/3d-printers/) Ackuretta Diplo (https://3ddds.net/3d-printers/) Laura Sanders, MDT - Studio32 Dental Arts in Amarillo, TX BEGO Varseo (https://usa.bego.com/3d-printing/3d-printer/3d-printer-varseo-s/) Whipmix Asiga Max (https://whipmix.com/products/asiga-max/) Stop by the Nowak Dental Supplies booth at Cal-Lab and booth B-47 in the main exhibit hall at LMT Lab Day Chicago 2019! Tell them you heard them here on Voices From the Bench! Nowak Dental Supplies (https://www.nowakdental.com/) Come see Voices From the Bench at LMT Lab Day on Friday afternoon and all day Saturday! Special Guests: Ken Kincaid CDT, TE, Laura Sanders, MDT, CDT, Michael Tanaka, and Tony Prestipino, CDT.

Dr. Robert Lee completed his dental training at the University of Sydney and his MBA at the University of New South Wales, Australia. After several years in private practice in Sydney, he transitioned to the corporate world and held various leadership positions including positions with Degussa Dental, Kulzer, GC and Procter & Gamble. Most recently, he was the Director of Marketing for North America with GC. He is the founder and President of Denticus, Inc., specializing in dental marketing and consulting.

During this hour, hosts Michael Wilde and Fr. Will Thompson sat down with Karen & Dave Kulzer, as they hosted live from St. James Coffee in Rochester, MN.

Welcome to episode 8! On this episode we get to know Lyndsie Kulzer my partner in crime.We had a very strange conversation with interruptions from the "ghosts" in the studio. We talked about life on the west coast, the police, first meetings gone south, and a bunch of other personal stuff As always EARSPACE is made possible by ROK10 productions you can find any of the instrumentals used in this and all further episodes exclusively for download at rok10productions.com Music used in this Episode Children (Prod.ROK10) off the EP SIdeways Tapes available for purchase at rok10productions.com

Shon Anderson, of B9 Creations, and Dr. Ulrich Koops stopped by Studio 1-A on Halloween to record a podcast all about 3D printers and some chemistry. Dr. Ulrich Koops works for Kulzer (http://www.kulzer.com) Mitsui Chemicals Group which is located in Hanau, Germany. He happened to be visiting Shon in Rapid City and decided to stop by for an old fashioned before heading home to Germany. We're glad they both came by to hang out for a bit!

Fri, 1 Jan 1993 12:00:00 +0100 https://epub.ub.uni-muenchen.de/9765/1/9765.pdf Heidland, August; Kulzer, Peter; Barkhausen, Regina; Schaefer, Liliana; Fink, Edwin; Schaefer, Roland M.