Podcasts about zirconia

Can composite really outperform ceramic in the right case? Do you know when to choose an inlay over an onlay? What makes occlusal veneers so effective — even at just 0.6 mm thickness? After years of anticipation, Dr. Pascal Magne finally joins Jaz Gulati on the podcast for an episode packed with adhesive dentistry gold. They dive deep into occlusal veneers, material selection, and why indirect composite may be the best-kept secret for worn, root-filled molars. They also unpack the full bonding protocol step-by-step—from air abrasion and IDS to silane application and cementation with preheated composite. Whether you're doing full rehabs or composite repairs, this episode is your go-to guide for smarter biomimetic dentistry. https://youtu.be/WTsF1mD-nTo Watch PDP221 on Youtube Protrusive Dental Pearl: After applying silane, don't just let it evaporate—let it react for 30 seconds, then air dry, and crucially, use a heat source (like a hairdryer) for 60 seconds to activate it properly and achieve optimal bond strength. This enhances the effectiveness of silane and significantly improves the bond strength of indirect restorations like composite or lithium disilicate. Key Takeaways: Occlusal veneers can be as thin as 0.6 mm. Indirect composite is often a superior choice for restorations. Proper bonding protocols are crucial for successful restorations. Focusing on strengths rather than weaknesses is key in dentistry. Conservative approaches in dentistry can preserve tooth structure. The vital tooth is always preferable to a non-vital tooth. Composite resin has wear properties similar to enamel. Occlusal veneers provide excellent protection for compromised teeth. Porcelain veneers have long-term durability compared to composites. The evolution of composite materials has led to better options for restorations. Zirconia is strong but difficult to adjust and bond effectively. Immediate dentin sealing is crucial for successful bonding and patient comfort. The Dahl principle allows for minimal preparation in certain cases. Composites can be as effective as ceramics when used correctly. Understanding the properties of materials is essential for successful restorations. Thin occlusal veneers can be successfully bonded with proper techniques. Highlights of this episode: 0:00 Introduction 02:52 Protrusive Dental Pearl 04:42 Dr. Pascal Magne on His Current Focus 10:16 Understanding Cusp Coverage and Material Choices 15:48 Conservative Approaches in Dentistry 23:16 Unsupported Enamel: Can it Still be Reinforced? 28:05 Occlusal Veneers Indications 37:00 Material Selection: Composite vs Ceramic 01:24:42 Outro Referenced Studies - all below are available to download on Protrusive Vault in Protrusive Guidance Effect of immediate dentine sealing on the aging and fracture strength of lithium disilicate inlays and overlays  Short-fiber Reinforced MOD Restorations of Molars with Severely Undermined Cusps  Ultrathin CAD-CAM glass ceramic and composite resin occlusal veneers for the treatment of severe dental erosion  Strains in the marginal ridge during occlusal loading  Antagonist Enamel Wears More Than Ceramic Inlays  Outcomes of resin-bonded attachments for removable dental prostheses Performance of ceramic laminate veneers with immediate dentine sealing  Keep the learning going with Magne Education If you enjoyed this episode, don't miss A Geeky Discussion on Adhesive Onlays – that's PDP161! This episode is eligible for 1.25 CE credit via the quiz on Protrusive Guidance.  This episode meets GDC Outcomes B and C. AGD Subject Code: 250 OPERATIVE (RESTORATIVE)DENTISTRY (Indirect restorations) Aim: To provide clinicians with evidence-based guidance on occlusal veneer indications, material selection, and conservative restorative protocols—emphasizing the role of adhesive techniques and biomimetic prin...

An experienced Dental Lab Ceramist and Academy Educator, Suzanne brings her 35+ years of experience to each course she leads to provide participants with up-to-date information about dental products and procedures. As a Chairside Specialist, Academy Educator supporting the Dentsply Sirona Restorative and CAD/CAM teams on the Blocks, Suzanne has extensive experience within the CAD/CAM market and has an in-depth knowledge of fabricating esthetic and functional restorations with both Zirconia and Glass Ceramic materials.   Suzanne's early career was spent within the Dental Laboratory space as a Ceramist—progressing to Dentsply's R&D with porcelains, then moving into a role as Technical Communications and Sales Support and later to product development support and sales training. Suzanne's background provides her with both foundational material science knowledge and procedure expertise that allow her courses to focus on both how to process CAD/CAM materials and where common mistakes can lead to pitfalls and inefficiencies.  Suzanne lives in New Jersey with her husband Ralph and their two daughters. In her spare time, she enjoys reading, spending time at the NJ Shore with her family, and has recently welcomed a new granddaughter.

Did you know that the metal filling in your mouth essentially functions as an antenna for nnEMFs (i.e. cell phones)? That's not good for your mitochondria.  And if you have a mercury filling, did you know that every time you chew food you are causing mercury vapor to be released that you then breathe in? Think of all the deleterious effects from those two instances along.​​Every time I talk to biological dentists, I am always impressed with just how much our oral cavity impacts our entire system; and today's conversation with brother biological dentists from Smilebody, Dr. Shawn Javid and Dr. Shawn Javid, is another insightful look into how and why we need to be taking our oral hygiene and health more seriously for overall wellness.​​Countless people are dealing with brain fog, cardiac dysfunction, low back pain, hormonal issues and so much more than can be directly tied to an underlying root cause issue in their mouth that has never been considered. Many of the aforementioned issues are "patched up" with drugs, surgeries, and other modalities  — even something like red light therapy  — that may help stem the tide or provide temporary relief, but not attack the root cause of something like a cavitation, infected root canal, metal dental work in the mouth, an infected jaw bone or leaky gums.  The Javid brothers founded their renowned holistic dental practice, Smilebody, in Los Angeles where they have patients that fly in from all over the country because of their impeccable skillset as biological dentists and also because of their unique knowledge base and perspective that allows them to embody a whole-body paradigm versus treating the oral cavity in isolation. Their incorporation of effective, efficacious biohacking modalities also lends their clientele to receiving an unparalleled, comprehensive treatment. ​​If you found the information in today's episode with Dr. Ben & Shawn Javid particularly interesting and/or compelling, please share it with a family member, friend, colleague and/or anyone that you think could benefit and be illuminated by this knowledge. Sharing is caring :)As always, light up your health! - Watch this video on YouTube - Where to learn more from and about Dr. Ben & Shawn Javid:​​InstagramFacebook​​MySmileBody.com​ - Key Points: [00:16] Introducing guests: Dr. Ben Javid & Dr. Sean Javid, biological dentists from SoCal [01:36] The transition from conventional to biological dentistry [02:37] The creation of Smilebody: Integrating biological dentistry with functional medicine [03:26] How Dr. Mike met Dr. Ben through Dr. Dominic Nischwitz [04:02] The evolution of Smilebody into a holistic health & longevity center [05:36] Treating the body as a whole rather than in silos [07:48] Frustration with lack of functional medicine support led to Smilebody's creation [09:33] Breaking down biological vs. conventional dentistry [10:36] Five main focuses of biological dentistry (root canals, mercury toxicity, etc.) [12:26] Understanding the mouth-body connection (meridians, systemic health) [14:45] Three key topics to discuss: • Biocompatibility & toxic load • Mouth-body connection • Oral microbiome [15:55] Biocompatibility: How to determine if a material is safe [16:13] Mercury fillings: Hidden dangers & toxicity exposure [17:46] EMF exposure & its impact on dental materials [18:28] Safe alternatives: Zirconia & porcelain [21:12 ] Root Canals & Infections [22:26 ] Cavitations & Toxicity [23:06 ] Nutrition & Healing [24:49 ] Case Study: Root Canal Infection & Chronic Sinus Issues [26:34] Biocompatible Dental Materials [27:46 ] Systemic Health Improvements Post-Dental Treatment [28:53 ] Dental Meridians & Whole-Body Impact [30:43 ] Oral Microbiome & Gut Health [34:21] Dangers of Conventional Mouthwashes [35:50] Evolution of Dental Health & Weston A. Price Research [37:36] Heavy Metals & Generational Toxic Load [38:28] The Future of Biological Dentistry [38:56] pH & Oral Microbiome Balance [40:33] The Impact of Anaerobic Conditions in the Mouth [41:01] Balancing Oral and Systemic Health [42:19] Eliminating Inflammatory Foods [43:15] Integrating Technology in Biological Dentistry [45:13] Photobiomodulation in Dentistry [48:08] The Role of Everyday Oral Care Technology [51:30] Additional Oral Health Practices [54:00] Importance of Tongue Scraping [55:10] Customizing Oral Health Routines [56:20] Where to Learn More [57:35] Upcoming Speaking Engagements and Events [59:08] Final Message: Living with Passion  - The Illume sonic toothbrush is quickly becoming the favorite tool for improving overall oral health by biological dentists around the world, including Dr. Ben & Dr. Shawn Javid!   For the next week, save 15% on all orders of the Illume toothbrush and add red and blue light to your oral health regimen!Discount code: mysmilepodcast   Shop the BioLight Illume by clicking here! - Dr. Mike's #1 recommendations: Water products: Water & Wellness Grounding products: Earthing.com EMF-mitigating products: Somavedic Blue light-blocking glasses: Ra Optics - Stay up-to-date on social media: Dr. Mike Belkowski: Instagram LinkedIn   BioLight: Website Instagram YouTube Facebook

Latest episode of Elvis on the Dental Fuel Podcast. Apple Podcasts:https://podcasts.apple.com/us/podcast/elvis-dahl-financial-mistake/id1683707577?i=1000689968481 Spotify: https://open.spotify.com/episode/2GyFDOvuGLdAp2Xkmulip8?si=N5DXdWrGT7-5xvwzAdYqIA Make sure you visit Ivoclar (https://www.ivoclar.com/en_us) at LMT Lab Day Chicago 2025 (https://lmtmag.com/lmtlabday). Ivoclar will be in their usual spot at Grand Ballroom A&B in the East Tower, on the Gold Level. Right across from the registration desk. Register today! (https://lmtmag.com/ivoclar) Make sure you come see VOICES FROM THE BENCH recording from the Ballroom all weekend! Attend the 99th Annual Cal-Lab Meeting (https://cal-lab.org/) Feb 20 & 21 at the Swissôtel in Chicago. (Connected to the Hyatt and Lab Day) Elvis & Barb will be *recording there Thursday night during the "Cocktail Hour" from 4:00 to 6:30 * Register today: https://cal-lab.org/annual-meeting This week we had the privilege of sitting down with the dynamic team from Amann Girrbach (https://www.amanngirrbach.com/en-us/). We kicked off the conversation with CEO Keith Clements, who shared his remarkable journey to AG. With over 20 years of experience in the dental sector, Keith transitioned from semi-retirement to leading Amann Girrbach, emphasizing the importance of a strong distribution model, highlighting the company's commitment to building trust with their dealer partners. Director of Operations Nick Pizzo followed up with insights into his extensive background in supply chain and logistics. After spending over a decade with Amazon, Nick brings to the company unmatched customer service experience. Industry veteran Maurice "Mo" Whitlock, who has been with AG for nearly a decade, brought a wealth of knowledge to the discussion. He emphasized the importance of customer experience with the motto "The relationship to me starts after the sale." This sentiment resonates deeply in a market where service can make or break a company's reputation. Throughout the episode, the team discussed the innovative changes they are implementing to enhance customer service. From remote repairs utilizing high-resolution cameras to a focus on technician training, AG is setting new standards in the dental milling space. Keith shared their vision of creating a customer-centric approach, all while celebrating every mill install they do. This episode is not just about the products; it's about the passion and commitment behind them. You are invited to Ivoclar (https://www.ivoclar.com/en_us)'s IPS e.max Panel Discussion Friday, February 22nd stating at 3:00 at LMT Lab Day in Chicago. Our very own Barb Warner will be on stage with Jessica Birrell, Stephenie Goddard, Mike Roberts, Jed Archibald and Dr. Ken Malament as they dive into the world of e.max. After the panel discussion, Ivoclar will host a Happy Hour to commemorate this 20-year milestone. So, please join us by registering at Labday.com/Ivoclar. Make sure you visit Aidite (https://www.aidite.com/) at Booth E-26 during your visit at LMT Lab Day Chicago (https://lmtmag.com/lmtlabday)! They will be there showcasing their exciting new products and cutting-edge solutions in digital dentistry. Attendees can explore hands-on demonstrations of Biomic stain & glaze (https://www.aidite.com/detail/materials/Biomic_Stain_Glaze_130_2.html) techniques and some of their other innovative technologies. Aidite will also host engaging lectures in Grand Suite 2, East Tower, covering topics such as EZneer (https://www.aidite.com/detail/materials/EZneer_113_2.html), 3D Pro-Zir, (https://www.aidite.com/detail/materials/3D_Pro_Zir_111_2.html) Digital Dentures, and their Aidite Cloud design service (https://www.aiditecloud.com/). Even before you go, you can stay updated by following @AiditeNorthAmerica (https://www.instagram.com/aiditenorthamerica/) on all social media platforms. Don't miss the opportunity to see how Aidite is shaping the future of dental labs! Special Guests: Keith Clements, Maurice “Mo” Whitlock, CDT, and Nick Pizzo.

All on X ... Cosmetic cases for everyone ... new grads with no experience. We've lost our way in dentistry. Join Dr. Gordon Chrisensen - learn the data on what you're being told works long-term vs reality. From implants, to Zirconia, to the most highly marketed CE courses ... you're going to be shocked!

We've been involved in a blind test of 8 different types of zirconia. We've analyzed the optical properties. We've analyzed the strength properties. And ultimately, we've analyzed the results. This has led us to a breakthrough in material discovery, and we are pleased to say we will be making our new PREMIUM ZIRCONIA available for your cases on January 1st. Being in the dental lab business for nearly 50 years, we needed a zirconia that we could be proud of. Our slogan is #TheArtBehindYourSmile so esthetics played a huge role in this discovery. At the same time, strength and reliability are equally as important. An expensive car is of no use to anybody if it's always needing to be fixed or repaired in the shop, and premium restorations are no different. They have to look great AND be reliable to not break. We've discovered a material that finds the perfect equilibrium. A premium material we can use for Anterior Restorations, Full Arch zirconia, 3-4 Unit Posterior Bridges, All on X, and so much more. This is a zirconia that can deliver exceptional results on many of the restorations you and your patients see every day, and will continue to see long into the future. Ladies & Gentlemen, you're listening to "Confessions From A Dental Lab" and we're happy you're here. Subscribe today and tell a friend so we can all get 1% better :) Follow KJ & NuArt on Instagram at @lifeatnuartdental, you can also reach us via email: kj@nuartdental.com Learn more about the lab and request information via our website: https://www.nuartdental.com/new-dentist-contact-form/

Today we'll be taking a clinical journey through the delivery of a zirconia crown. We'll talk about the scan, marking our margins, working with the lab, choosing the right kind of zirconia and the tools and techniques for seating, adjusting and polishing our zirconia crown. Our guest is Dr. Marty Jablow, known as America's Dental Technology Coach.

To run a successful company you need a good range of quality products and stellar people to help promote and train. Well that is who we found out is behind the company Aidite North America (https://www.aidite.com). Tom Heusing is the General Manager, Bob Hadley is the National Sales Manager, and Erica DiManna is the Marketing Manager. Together they talk about their previous employment together, finding their way back working together again, all about Aidite and Aidite North America, and why having the right people and the right partners is their key to their growth and success. Be sure to follow them everywhere at: Sign up for the Aidite Pulse monthly newsletter here: https://bit.ly/aiditepulse Aidite website: https://www.aidite.com Facebook: https://www.facebook.com/AiditeNorthAmerica LinkedIn: https://www.linkedin.com/company/aidite-north-america/ Instagram: https://www.instagram.com/aiditenorthamerica/ YouTube: https://www.youtube.com/@AiditeNorthAmerica If you are in the market for purchasing a new milling machine or a furnace, Voices From the Bench invites you to connect with an Ivoclar (https://www.ivoclar.com/en_us) sales associates. They have several great deals and financing options now available for you to take advantage of. These robust and dependable machines were designed to make your laboratory more efficient and profitable. They are work horses when it comes to processing IPS e.max lithium disilicate (https://www.ivoclar.com/en_us/products/metal-free-ceramics/ips-e.max-press-lab) and the amazing Prime Zirconia (https://www.ivoclar.com/en_us/products/digital-processes/prime-zirconia). The PM7 mill (https://www.ivoclar.com/en_us/products/digital-equipment/programill-pm7) also allows you to do digital dentures with their game changing Ivotion puck (https://www.ivoclar.com/en_us/products/digital-processes/ivotion). Head over to ivoclar.com (https://www.ivoclar.com/en_us), voicesfromthebench.com/ivoclar, or call them at 1-800-533-6825. Special Guests: Bob Hadley, Erica DiManna, and Tom Heusing.

Praises or critics can be send here! Also if there's anything you wish to hear about please send your requests here!Ever wondered what it takes to conquer an 11th boss in Molten Core? Join us at the Pig and Whistle Inn in Stormwind as we share the latest Azerothian gossip and delve into hot topics like the emergence of Basricron, Zirconia, Elders, and Aerostar. We'll break down the current bonuses for battlegrounds and dissect the mythic affixes: Raging, Afflicted, and Fortified. The highlight of our discussion revolves around the Season of Discovery and the formidable new boss that surfaces post-Ragnaros. Tune in to understand how strategic coordination with Hydraxian firefighters can tip the scales in this epic encounter, and hear our take on the community's feedback about this boss's design limitations and creative potential.Is the grind in MMOs a necessary evil or a cornerstone of player engagement? We sift through community opinions on the complexity of Molten Core's bosses, from Lucifron to Gar, and tackle the debate over raid mechanics and gear-specific requirements. Our conversation then shifts to the broader MMO landscape, examining how grinding—from gear farming to PvP rating—keeps players coming back for more. Finally, we address the pervasive negativity in gaming forums and advocate for fostering positive interactions within the community. Share your thoughts with us on social media and let us know what you want to hear next. Grab a drink, sit back, and enjoy our latest episode! Hope you all enjoy and hope you relate to any of these stories. And I will speak to you all in the next episode!Support the show here:https://www.buzzsprout.com/1196870/supportpatreon.com/Pigandwhistlehttps://www.buymeacoffee.com/PigandWhistleSocials :Twitch : https://www.twitch.tv/pigandwhistletalesYoutube : https://www.youtube.com/channel/UCAOi6rHO3x90lOmmb82Jv1wWebsite : https://www.pigandwhistletales.com/Instagram : https://www.instagram.com/pigandwhistletales/Facebook : https://www.facebook.com/PigAndWhistleTalesTry out Buzzsprout yourself! https://www.buzzsprout.com/?referrer_id=1154066Listen to the podcast on other platforms:https://www.listennotes.com/podcasts/pig-whistle-tales-from-azeroth-gabriel-nsa902LrQVw/https://www.podchaser.com/podcasts/pig-whistle-tales-from-azeroth-1315927https://open.spotify.com/show/5ZTkLtQvRSm4PStUfZquWkhttps://podcastaddict.com/podcast/3032607The Music at the start is from Tony Catch they do many amazing cover songs for games you can find the link here: The Gaming BlenderCould you design a video game?Listen on: Apple Podcasts SpotifySupport the Show.Support the show here: https://www.buzzsprout.com/1196870/support patreon.com/Pigandwhistle https://www.buymeacoffee.com/PigandWhistle

Practicing with Integrity: How It All Began and How It Has Evolved E1 In this episode of “Practicing with Integrity,” host Dr. Daniel Galindo kicks off the podcast by welcoming Rob Dinker, the founder and CEO of Integrity Dental Services. Rob takes us through the fascinating journey of his company, which started in 2019 just […] The post Practicing with Integrity: How It All Began and How It Has Evolved E1 appeared first on Business RadioX ®.

Practicing with Integrity: How It All Began and How It Has Evolved E1 In this episode of “Practicing with Integrity,” host Dr. Daniel Galindo kicks off the podcast by welcoming Rob Dinker, the founder and CEO of Integrity Dental Services. Rob takes us through the fascinating journey of his company, which started in 2019 just […] The post Practicing with Integrity: How It All Began and How It Has Evolved E1 appeared first on Business RadioX ®.

This week we wrap up the conversations at the exocad (https://exocad.com/) Insights 2024 meeting from Mallorca, Spain. Elvis and Barb can not thank exocad enough for this amazing opportunity to showcase some many AMAZING people in our industry. Things were learned, friends were made, laptops were returned, and memories were made. Thank you exocad! First up is dental technician that is working on business development at Nobel Biocare (https://www.nobelbiocare.com/en-us), Chuck Genco. Chuck is 35 year veteran in various dental labs. He's now with Nobel Biocare helping them create a solution based digital workflow with a emphasis on "time to teeth". He talks about his journey, his role at Nobel, and what some interesting things they are working on. Then we talk to two friends in Spain, from Syria, working in Sweden. Yousef Ibrahim is a ceramist. Maher Al Hanfeish is the cad/cam technician. After leaving Syria, they both found their way to the same lab in Sweden and have been friends ever since. They talk about their journey into the lab, getting to Sweden, and their daily life in a lab. As a special BONUS, we talk to the Chair of the Foundation for Dental Laboratory Technology (https://dentallabfoundation.org/), Jen Ludwig and the Executive Director, Lindsey Rowan. They both come on to talk about the upcoming Race for the Future happening on September 15th, 2024 in Fort Worth, Texas. Join the Race: https://fdlt.memberclicks.net/donor-form DONATE TODAY: https://fortworth.californiatriathlon.org/Race/Register/?raceId=99407 Introducing Ivotion Digital Dentures (https://www.ivoclar.com/en_us/products/digital-processes/ivotion) from Ivoclar (https://www.ivoclar.com/en_us) – Experience unparalleled precision and efficiency with Ivoclar‘s state-of-the-art digital denture workflow. Ivotion is available in their patent pending monolithic disc that combines denture base and tooth materials in one seamless puck. Or if you lab needs more flexibility, Ivotion is also available as stand-alone discs - Ivotion Base, Dent and Dent Multi all in 98mm width to fit your favorite milling machine. With Ivotion you can streamline your lab's processes, reduce production time, and enhance patient satisfaction. Elevate your lab's capabilities with Ivotion Digital Dentures – where innovation meets perfection. Discover the future of dentures today with Ivoclar." Thanks for your continued support of the podcast Ivoclar. Join the GOLDEN BENCH CLUB! All you have to do is leave us a 5-star review and comment on the Apple Podcast app (or any other app and email us a screen shot) and we will read your review on the podcast and welcome you to the Golden Bench Club. This super elite club is only for the best of the best. Special Guests: Chuck Genco, Jennifer Ludwig, CDT, Lindsey Rowan, Maher Al Hanfeish , and Yousef Ibrahim.

What's the best way to deliver a zirconia crown quickly. In this episode we'll take a closer look at the nuances of cementing, adhesion, and zirconia primers. Our guest is Dr. Todd Snyder, a popular speaker on Viva Learning.com, a cosmetic dentist, international author, lecturer and consultant to dental companies. He hosts a weekly podcast, Delusional: Winning the Weekly War of Dentistry. You can reach Dr. Snyder at: www.Legion.Dentist.

When it comes to choosing the right material for your veneer or crown it can get a little tricky. Lately, it's been a contest between zirconia and lithium disilicate. There are definite clinical indications for each. And the other question is do we bond or use traditional cements. To give his perspective on all this is our guest is Dr. Todd Snyder. Dr Snyder is a popular speaker on Viva Learning.com, a cosmetic dentist, international author, lecturer and consultant to dental companies. He hosts a weekly podcast, Delusional: Winning the Weekly War of Dentistry. You can reach Dr. Snyder at: www.Legion.Dentist.

This throwback episode features Dr. John Burgess. I heard of his recent passing and thought it would be very appropriate to replay a spectacular interview I was privileged to have with him back in 2022. Do you have advice that you've heard that you use on almost every single procedure? I do. And it came from today's guest, Dr. John Burgess. Dr. Burgess is the assistant Dean for Clinical Research at the University of Alabama at Birmingham as well as Director of the Graduate Biomaterials Program and was recently featured on the main stage at the Spear Summit 2022.  But I heard John at the Spring Vedder society meeting some years back and some of the things he said have stayed with me to this day. It was a true pleasure to get to talk with John about what he does, how materials research should be done and how dentists can be better at understanding materials. How does someone get in to biomaterials research? Clinical research at LSU How to find unbiased information...how do we evaluate literature? Is the research measuring what they think it's measuring? Bevels on posterior composites? How do we test this? (spoiler alert: don't bevel occlusal margins) The best material is "abuse tolerant." How do patients get screened for clinical research? NCCLs (noncarious cervical lesions) and the controversy surrounding them New chemistry Read the instructions more often than you think you should! "Dentists don't read" Manufacturers take their instructions very seriously...you should, too. Burgess on zirconia Designing research equipment on a napkin Zirconia is very kind to the opposing when polished Cementing zirconia crowns Cement removal...he REALLY likes Panavia SA Universal Polish vs. glaze on zirconia (glaze facial on premolars) The power of a credible speaker and disclosure of honoraria Some links from the show: Dr. John Burgess' website Spear Practice Solutions Panavia SA Universal Axis by Kerr zirconia polishers Join the Very Dental Facebook group using the password "Timmerman," Hornbrook" or "McWethy," "Papa Randy" or "Lipscomb!" The Very Dental Podcast network is and will remain free to download. If you'd like to support the shows you love at Very Dental then show a little love to the people that support us! -- Crazy Dental has everything you need from cotton rolls to equipment and everything in between and the best prices you'll find anywhere! If you head over to verydentalpodcast.com/crazy and use coupon code “VERYDENTAL10” you'll get another 10% off your order! Go save yourself some money and support the show all at the same time! -- The Wonderist Agency is basically a one stop shop for marketing your practice and your brand. From logo redesign to a full service marketing plan, the folks at Wonderist have you covered! Go check them out at verydentalpodcast.com/wonderist! -- Enova Illumination makes the very best in loupes and headlights, including their new ergonomic angled prism loupes! They also distribute loupe mounted cameras and even the amazing line of Zumax microscopes! If you want to help out the podcast while upping your magnification and headlight game, you need to head over to verydentalpodcast.com/enova to see their whole line of products! -- CAD-Ray offers the best service on a wide variety of digital scanners, printers, mills and even  their very own browser based design software, Clinux! CAD-Ray has been a huge supporter of the Very Dental Podcast Network and I can tell you that you'll get no better service on everything digital dentistry than the folks from CAD-Ray. Go check them out at verydentalpodcast.com/CADRay!

https://www.robbinsdds.com/ https://www.mystoneoakdental.com/ Follow @dental_digest_podcast Instagram Follow @dr.melissa_seibert on Instagram Connect with Melissa on Linkedin  DOT - Use the Code DENTALDIGEST for 10% off   J. William Robbins, D.D.S., MA., maintains a full-time private practice and is an Adjunct Clinical Professor in the Department of Comprehensive Dentistry at the University of Texas Health Science Center at San Antonio Dental School. He graduated from the University of Tennessee Dental School in 1973. He completed a rotating internship at the Veterans Administration Hospital in Leavenworth, Kansas and a 2-year General Practice Residency at the V.A. Hospital in  San Diego, California. Dr. Robbins has published over 80 articles, abstracts, and chapters on a wide range of dental subjects and has lectured in the United States, Canada, Mexico, South American, Europe, Middle East and Africa. He co-authored a textbook, Fundamentals of Operative Dentistry – A Contemporary Approach, which is published by Quintessence, and is in its 4th edition. He recently co-authored a new textbook, Global Diagnosis – A New Vision of Dental Diagnosis and Treatment Planning, which is also published by Quintessence. He has won several awards including the Presidential Teaching Award at the University of Texas Health Science Center, the 2002 Texas Dentist of the Year Award, the 2003 Honorary Thaddeus V. Weclew Fellowship Award from the Academy of General Dentistry, the 2010 Saul Schluger Award given by the Seattle Study Club, the Southwest Academy of Restorative Dentistry 2015 President's Award, and the 2016 Academy of Operative Dentistry Award of Excellence. He is a diplomat of the American Board of General Dentistry. He is past president of the American Board of General Dentistry, the Academy of Operative Dentistry, the Southwest Academy of Restorative Dentistry, and the American Academy of Restorative Dentistry.

I am a highly experienced holistic dentist with a professional journey spanning over three decades among disciplines and continents. My clinical practice, based in both the U.S. and Europe, encompasses general dentistry, systemic dentistry, cosmetic enhancements, preventive care, and specialized treatments such as amalgam removal, infection treatment, and snoring/sleep apnea interventions. I have had the privilege of leading dental departments, directing operations, creating dental technologies and patents, and overseeing patient care in diverse settings from private practices to specialized medical centers.    My commitment to holistic health extends beyond traditional dentistry; I've pursued advanced studies in aesthetic medicine, acupuncture, electro-acupuncture, and other integrative disciplines, furthering my understanding of the interconnectedness of oral health with overall wellbeing. My academic credentials include an MSc in Aesthetic Medicine from Queen Mary University of London, a Doctor of Dental Surgery Degree from the University of the Pacific, School of Dentistry, and a deep foundation in biochemistry from both California State University and UCLA.    As a staunch advocate for holistic, biomimetic, and environmentally conscious dentistry, I've acquired numerous accreditations, notably from the International Academy of Oral Medicine and Toxicology (IAOMT), Academy of Biomimetic Dentistry, and American Academy of Cosmetic Dentistry. Furthermore, my unique expertise in forensic dentistry as a Police Surgeon in New York showcases the diversity of my skills and contributions to the dental field.    Throughout my career, I have maintained active memberships with globally recognized dental associations, remaining committed to ongoing education, knowledge sharing, and promoting holistic dentistry principles. As a seasoned practitioner, I'm passionate about harnessing the power of integrative care to create personalized and comprehensive dental experiences for my patients.    Over the years, a consistent dedication to holistic dentistry has been showcased through diverse professional engagements, from the Holistic Dental Association's emphasis on Dental Epigenetics and Biomimetics to collaborations with Dr. Klinghardt Institute on systemic dentistry. This journey, marked by insights into the links between oral health and systemic well-being, has positioned dentistry as central to overall health. Both live sessions and online appearances, like the Myers Detox Podcast and Dr. Talks Summit, have echoed this sentiment, spotlighting the evolving role of dental practices in holistic wellness. I'm most proud of my patent established on United Stats Patient, Registered September 8th, 2020 for the Casanova Facelift technology.    I possess a wealth of expertise in dentistry and related fields, gained through extensive continuous education and specialized training that is unmatched except by the 1% of top dentists. My journey encompasses a diverse range of courses, seminars, and conferences, spanning topics such as advanced aesthetics, injectable fillers, dental implants, holistic dentistry, and more. Through this journey, I've developed a deep understanding of dental practice, blending theoretical knowledge with hands-on experience to embrace emerging technologies and evolving medical trends. Website : www.systemicdentist.com     Work With Me: Mineral Balancing HTMA Consultation: https://www.integrativethoughts.com/category/all-products  My Instagram: @integrativematt My Website: Integrativethoughts.com   Advertisements:   Valence Nutraceuticals: Use code ITP20 for 20% off https://valencenutraceuticals.myshopify.com/   Zeolite Labs Zeocharge: Use Code ITP for 10% off https://www.zeolitelabs.com/product-page/zeocharge?ref=ITP Magnesium Breakthrough: Use Code integrativethoughts10 for 10% OFF https://bioptimizers.com/shop/products/magnesium-breakthrough Just Thrive: Use Code ITP15 for 15% off https://justthrivehealth.com/discount/ITP15 Therasage: Use Code Coffman10 for 10% off https://www.therasage.com/discount/COFFMAN10?rfsn=6763480.4aed7f&utm_source=refersion&utm_medium=affiliate&utm_campaign=6763480.4aed7f   Chapters:   00:00 Introduction and Background 08:15 The Influence of Dr. Klinghardt 29:57 Preparation and Protocols for Dental Procedures 38:30 Understanding Cavitations and Their Impact on Health 54:46 The Importance of Holistic Healing in Addressing Cavitations 01:07:43 Diagnosing Cavitations with 3D Cone Beam Scans 01:17:20 Zirconia Implants: A Better Alternative to Titanium   Takeaways:   Biological dentistry takes a holistic approach to dental health, considering the impact of dental issues on the immune system and overall well-being. Mercury fillings and dental infections can have long-term effects on health, including chronic issues and systemic toxicity. Proper preparation and protocols are essential before and after dental procedures to ensure successful outcomes and minimize the risk of complications. Biomimetic dentistry focuses on conserving as much natural tooth structure as possible and using advanced techniques to promote longevity and oral health. Addressing gut health and heavy metal detoxification are crucial aspects of dental care and overall wellness. Cavitations are infections in the jaw that can cause autoimmune issues and other health problems. Improper tooth extractions and other factors can lead to cavitations. Mercury fillings and heavy metal toxicity can contribute to cavitations and other health issues. Detoxification and chelation protocols should be approached with caution and under the guidance of a knowledgeable practitioner. Addressing the physical, energetic, mental, intuitive, and spiritual aspects of healing is important. A 3D cone beam scan is recommended for diagnosing cavitations. Finding a dentist with expertise in whole body dentistry is crucial. 3D scans are essential for identifying cavitations and should be a standard practice in dentistry. Continuing education is crucial for dentists to stay updated on new treatments and technologies. Mineral balancing plays a significant role in overall health and should be considered in patient care. Melatonin can aid in detoxification and improve sleep architecture. Zirconia implants are a better alternative to titanium implants due to their biocompatibility and ability to allow light to pass through. Addressing structural issues before dental procedures is important for long-term success. Collaboration between dentists and chiropractors can enhance treatment outcomes.   Keywords: biological dentistry, mercury fillings, dental infections, cavitations, holistic approach, immune system, dental toxins, dental procedures, biomimetic dentistry, gut health, heavy metal detoxification, root canals, cavitations, jaw infections, autoimmune issues, tooth extractions, mercury fillings, heavy metal toxicity, detoxification, chelation, holistic healing, 3D cone beam scan, whole body dentistry, cavitations, 3D scans, continuing education, mineral balancing, melatonin, zirconia implants, structural issues, collaboration

Most of us have started using zirconia as a material for our indirect restorations. We either mill it chairside or send it out to the lab to be fabricated. Either way we need to make sure that our technique is perfect when delivering it to the tooth, especially if we are working with a non-retentive prep. If we need to rely on adhesion, we have to understand the nuances of bonding zirconia to tooth structure. To tell us all about it is our guest Dr. Alex Vasserman. Dr Vasserman is a respected clinician running his own practice on the Upper East side of Manhattan.

When you want biologically compatible tooth restoration, you can't go wrong with zirconia dental implants. Get in touch with Holistic Dental Wellness of Kansas City for the latest metal-free dental treatments. Get in touch today at +1-816-772-5637 or visit https://holisticdentalwellnesskc.com/ Holistic Dental Wellness of Kansas City City: Independence Address: 17000 E US Hwy 40 #6 Website: https://holisticdentalwellnesskc.com Phone: +18167725637 Email: press@holisticdentalwellnesskc.com

Want to go on the ULTIMATE exocad (https://exocad.com/) vacation? Endless fun, epic weather, amazing food, exotic culture, and two days all about the greatest software in dental, exocad. Join Elvis and Barb on May 9 and 10 on the beautiful Spanish island of Mallorca (https://www.spain.info/en/region/mallorca-island/). It's called exocad Insights 2024 and it's full of amazing speakers, great breakout sessions, evening events, and attendees from all over the world. Don't wait, register today at exocad.com/insights2024 and use the code VFTB15 to save 15% off the fee. We will see you there! The shirts and hoodies are BACK! Back in January we sold "Dental Technicians: Making Dentist Look Good since the 1700s" shirts for Lab Day. So many people asked us to bring them back, so we did! Get them here before April 18! https://www.bonfire.com/vftb-the-zippered-hoodie-era/ We have even more conversations this week from the Ivolcar (https://www.ivoclar.com/en_li) Ballroom at LMT Lab Day Chicago 2024 with: James "The Denture Man" Angelone Jr and James Angelone III talking about being at the Smart Denture Conversion (https://smartdentureconversions.com/) booth all weekend, why they don't do "Big Hole" conversions anymore, teaching the next generation, and using Ivotion (https://www.ivoclar.com/en_ca/products/digital-processes/ivotion) dentures. Ivoclar's premier educator, Patrick Coon, stops by to talk about his history in the Air Force, on boarding with Ivoclar (https://www.ivoclar.com/en_li), being moved up to Digital Consultant, and some exciting things Ivoclar is working on. Then a special unexpected guest sits down, Peggy Alexander. Peggy is 87 years young and talks about the struggles of becoming a female dentist in the 50s, getting into teaching at the University of Texas, the importance of working with your lab, and life after retirement (which she hasn't even happened yet). Wanting to take your knowledge and skills to the next level? If you are looking for the best education dedicated to dentistry in both the labs and clinics, check out Ivoclar Academy. (https://resources.ivoclar.com/lab/en/academy) From on-demand webinars to in-person training, Ivoclar Academy has a program to meet your busy schedule. Check out all they have to offer HERE! (https://resources.ivoclar.com/lab/en/academy) Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth (https://vitanorthamerica.com/en-US/VITA-MFT-Anterior-369,273,126133.html) are the ultimate solution for creating lifelike and stunning smiles. Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA (https://vitanorthamerica.com/) believes in the power of experiencing excellence firsthand, for a limited time only, they're offering you the chance to get a complimentary case sample. That's right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft (https://www2.vitanorthamerica.com/mft/) Don't wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you're ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store. Join the VITA family today. Special Guests: James Angelone III, James Angelone “The Denture Man” , Patrick Coon, CDT, TE, and Peggy Alexander.

Alan was joined at the Chicago Midwinter by Dr. David Juliani and Heather Garner of Ivoclar to talk about a big roll out of a huge innovation in chairside CAD-CAM Zirconia! Ivoclar introduced Zircad Prime blocks at Midwinter this year and it turns out Dave is one of the beta testers who has used them most extensively! According to Heather the whole roll out was "low key amazing!" It also turns out that Al and Dave have some pretty interesting connections as they grew up in the same home town (Midland, MI) and graduated from the same high school (H.H. Dow High!). Dave and Heather explain how this next generation of chairside CAD-CAM delivers strength and esthetics that matches lithium disilicate!  Some links from the show: Zircad Prime blocks Join the Very Dental Facebook group using the password "Timmerman," Hornbrook" or "McWethy," "Papa Randy" or "Lipscomb!" The Very Dental Podcast network is and will remain free to download. If you'd like to support the shows you love at Very Dental then show a little love to the people that support us! -- Crazy Dental has everything you need from cotton rolls to equipment and everything in between and the best prices you'll find anywhere! If you head over to verydentalpodcast.com/crazy and use coupon code “VERYDENTAL10” you'll get another 10% off your order! Go save yourself some money and support the show all at the same time! -- The Wonderist Agency is basically a one stop shop for marketing your practice and your brand. From logo redesign to a full service marketing plan, the folks at Wonderist have you covered! Go check them out at verydentalpodcast.com/wonderist! -- Enova Illumination makes the very best in loupes and headlights, including their new ergonomic angled prism loupes! They also distribute loupe mounted cameras and even the amazing line of Zumax microscopes! If you want to help out the podcast while upping your magnification and headlight game, you need to head over to verydentalpodcast.com/enova to see their whole line of products! -- CAD-Ray offers the best service on a wide variety of digital scanners, printers, mills and even  their very own browser based design software, Clinux! CAD-Ray has been a huge supporter of the Very Dental Podcast Network and I can tell you that you'll get no better service on everything digital dentistry than the folks from CAD-Ray. Go check them out at verydentalpodcast.com/CADRay!

709: The Why's and Y's of Zirconia – Dr. Shashikant SinghalHow much do you know about zirconia? If zirconia is still a mystery, don't miss this episode! Kirk Behrendt brings in Dr. Shashikant Singhal, Director of Education & Professional Services at Ivoclar, to explain the different types of zirconia, its properties, and what dentists get wrong when using this material. To improve how you craft your dental masterpiece, listen to Episode 709 of The Best Practices Show!Learn More About Dr. Singhal:Follow Dr. Singhal on Instagram: https://www.instagram.com/drshashi_singhalLearn more about Ivoclar: https://www.ivoclar.com/en_usRegister for Ivoclar Academy: https://www.ivoclar.com/en_us/academy/about-the-academyMore Helpful Links for a Better Practice & a Better Life:Subscribe to The Best Practices Show: https://the-best-practices-show.captivate.fm/listenJoin The Best Practices Association: https://www.actdental.com/bpaJoin ACT's To The Top Study Club: https://www.actdental.com/tttSee the ACT Dental/BPA Live Event Schedule: https://www.actdental.com/eventGet The Best Practices Magazine for free: https://www.actdental.com/magazinePlease leave us a review on the podcast: https://podcasts.apple.com/us/podcast/the-best-practices-show-with-kirk-behrendt/id1223838218Main Takeaways:Not all zirconia is the same.Learn the properties of 3Y, 4Y, and 5Y.Know the appropriate uses for each zirconia type.Zirconia is strong — but each type has its limitations.Snippets:0:00 Introduction.1:32 Dr. Singhal's background.2:22 The background of zirconia.4:01 The three types of zirconia and GT technology.9:05 Color, explained.11:33 Strength and reliability, explained.14:04 Accuracy, explained.17:06 The importance of beauty.18:12 The importance of strength.20:26 What people get wrong about zirconia.21:45 The future of zirconia.23:28 Final thoughts.24:50 Learn more about Ivoclar and get in touch with Dr. Singhal.Dr. Shashikant Singhal Bio:Dr. Shashikant Singhal, BDS, MS, has diverse work experience spanning over a decade, and has held various positions in different organizations. He started his career as an intern at the College of Dental Sciences in 2008. In 2009, he worked as a graduate assistant at the UAB School of Dentistry, and also served as a supervisor at the UAB School of Public Health. In 2012, he joined the University at Buffalo's School of Dental Medicine as a materials research dentist. From 2012 onwards, he has been associated with Ivoclar NA, where he has held multiple roles including clinical specialist, manager of professional services, and director of professional services. He currently serves as the director of education and professional...

QUEENS -Women In The Industry event is happening April 5th & 6th 2024 at Bellisimo Castle! Check out queenswomenintheindustry.com to register for this wonderful event Elvis and Barb cannot believe Voices from the Bench is still going after 6 years! We owe it all to the listeners, the sponsors, and of course the guests that make this podcast what it is. 6 years ago, one educator agreed to be our very first guest, not knowing that she would be coming back every year. Renata Budny is a professor in the Restorative Dentistry (https://www.citytech.cuny.edu/restorativedentistry/dental-laboratory-aas.aspx) program at New York City College of Technology (https://www.citytech.cuny.edu/)and updates us on the school, how students find it, where they go after, and how as an industry we can help the school help the industry. This year, Renata brings on the podcast a recent graduate that has a unique story on why he signed up, Paul Beck. Paul talks about his experience in the program, what he learned, and why he decided to take his knowledge and social skills to Sierra Dental Tools. Did you know that not all Zirconia is the same? ZirCAD Prime (https://www.ivoclar.com/en_li/products/digital-processes/ips-e.max-zircad-prime-family) Zirconia from Ivoclar (https://www.ivoclar.com/en_us) is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength. ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Tell them you heard it on the podcast and get a FREE Prime disc to try – just use promo code 723! Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth (https://vitanorthamerica.com/en-US/VITA-MFT-Anterior-369,273,126133.html) are the ultimate solution for creating lifelike and stunning smiles. Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA (https://vitanorthamerica.com/) believes in the power of experiencing excellence firsthand, for a limited time only, they're offering you the chance to get a complimentary case sample. That's right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft (https://www2.vitanorthamerica.com/mft/) Don't wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you're ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store. Join the VITA family today. Join Elvis & Barb as Voices From the Bench goes international! On May 9th and 10th, the podcast will be recording at https://exocad.com/insights2024 on the beautiful Spanish island of Mallorca (https://www.seemallorca.com/). This is a fantastic educational event for all of you in the lab industry – and your clinical colleagues! The international speaker line-up is top-notch. There will be: keynote presentations from master dental technicians, digital experts, implant surgeons, lab owners, and more! Exocad's software experts will run hands-on sessions so you can get to know the latest releases…including DentalCAD 3.2 Elefsina (https://exocad.com/our-products/dentalcad-elefsina)…which was released recently. Techs…. Do you have a problem with a design? Just bring your stl file and let the Application Specialists take a look at it. Check out exocad.com/insights2024 to see the AMAZING line up of speakers and to register. Use promo code VFTB15 to save 15% off registration to what will be one of the greatest events of the year. See you there! Special Guests: Paul Beck and Renata Budny, CDT, TE.

Unlock the secrets of zirconia implants with Colorado Surgical Institute,  who join me for a riveting exploration of the aesthetic and health benefits these metal-free marvels bring to the table. We dissect the surgical precision required, compare their integration process to that of traditional titanium implants, and swap tales from the trenches of social media's impact on professional life. Whether it's navigating the meticulous world of osteotomy preparation or brushing off the dust from a viral post gone wild, this episode packs a punch for the curious and the seasoned dental practitioner alike.Ever wondered why some patients opt for the gleam of zirconia over the luster of titanium? Tune in as we scrutinize the increasing demand for these implants, particularly among the metal-sensitive and the aesthetically inclined. We travel from the high-demand urban jungles to the more tranquil rural landscapes, unpacking the role of geography in patient preferences. Amidst this, we also share insider tips on how to leverage the allure of zirconia implants to grow your practice, from savvy social media engagement to mastering the latest implantology techniques.Lastly, we pull back the curtain on the upcoming hands-on dental implant course, a rare gem promising live patient surgery and the kind of surgical insight that usually remains behind closed doors. If you're drawn to the adrenaline rush of groundbreaking educational experiences, this is where you want to be. Plus, we throw in a sneak peek at the comprehensive surgical training programs awaiting at the Colorado Surgical Institute, where advancing your dental prowess is the name of the game. Join us for a journey into the heart of dental innovation and leave equipped to take your surgical skills to the next level. LISTENER SURVEY!!! please go to my website at www.dentalpracticeheroes.com to fill out a listener survey and let me know what you like!DPH Coaching Operational Excellence: Strategies to streamline practice operations for efficiency and growth. Team Building and Leadership: Techniques to build a cohesive team and lead effectively. Financial Management: Guidance on managing the financial aspects of a dental practice for long-term success. Personal Development: Coaching on personal growth to enhance professional performance. Visit www.dentalpracticeheroes.com to Learn more Visit www.ColoradoSurgicalInstitute.com for more information about CE courses and get 10% off as a DPH listener!

Want to go on the ULTIMATE exocad (https://exocad.com/) vacation? Endless fun, epic weather, amazing food, exotic culture, and two days all about the greatest software in dental, exocad. Join Elvis and Barb on May 9 and 10 on the beautiful Spanish island of Mallorca (https://www.spain.info/en/region/mallorca-island/). It's called exocad Insights 2024 and it's full of amazing speakers, great breakout sessions, evening events, and attendees from all over the world. Don't wait, register today at exocad.com/insights2024 and use the code VFTB15 to save 15% off the fee. We will see you there! One of Elvis and Barb's favorite meetings every year is Cal-Lab (https://cal-lab.org/). Barb loves it so much she sits on the board and will be the Chair in 2026. This year the board asked if Voices From the Bench would record during their cocktail reception on Thursday night. We jumped at the chance to have an opportunity to talk to such amazing lab owners and managers. On this episode we talk to: Basil Callahan, the VP of Derby Dental Laboratories (https://www.derbydental.com/) who talks about his journey from janitor to VP, the importance of technology and data, and working with Elvis Sean Siegel from Castable Ceramics (https://www.apexlabgroup.com/castable-ceramics/) and Jim Thacker from Utah Valley Dental Lab (https://www.utahvalleydentallab.com/) talk about what Cal-Lab means to them, what they get out of it every year, some of the speakers from the day, and how other labs can join this association. Jeff Stronk, the current Chair of Cal-lab and owner of Treasure Dental Studio (https://treasuredentalstudio.com/) talks about what's it like being on stage among so many peers and friends, how Cal-Lab is reinventing themselves for a better meeting, how they choose the topics and speakers, getting Jim Glidewell to be the Keynote, and bring back epic evening parties. Did you know that not all Zirconia is the same? ZirCAD Prime (https://www.ivoclar.com/en_li/products/digital-processes/ips-e.max-zircad-prime-family) Zirconia from Ivoclar (https://www.ivoclar.com/en_us) is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength. ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Tell them you heard it on the podcast and get a FREE Prime disc to try – just use promo code 723! Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth (https://vitanorthamerica.com/en-US/VITA-MFT-Anterior-369,273,126133.html) are the ultimate solution for creating lifelike and stunning smiles. Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA (https://vitanorthamerica.com/) believes in the power of experiencing excellence firsthand, for a limited time only, they're offering you the chance to get a complimentary case sample. That's right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft (https://www2.vitanorthamerica.com/mft/) Don't wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you're ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store. Join the VITA family today. Join Elvis & Barb as Voices From the Bench goes international! On May 9th and 10th, the podcast will be recording at https://exocad.com/insights2024 on the beautiful Spanish island of Mallorca (https://www.seemallorca.com/). This is a fantastic educational event for all of you in the lab industry – and your clinical colleagues! The international speaker line-up is top-notch. There will be: keynote presentations from master dental technicians, digital experts, implant surgeons, lab owners, and more! Exocad's software experts will run hands-on sessions so you can get to know the latest releases…including DentalCAD 3.2 Elefsina (https://exocad.com/our-products/dentalcad-elefsina)…which was released recently. Techs…. Do you have a problem with a design? Just bring your stl file and let the Application Specialists take a look at it. Check out exocad.com/insights2024 to see the AMAZING line up of speakers and to register. Use promo code VFTB15 to save 15% off registration to what will be one of the greatest events of the year. See you there! Special Guests: Basil Callahan, Jeff Stronk, Jim Thacker, and Sean Siegel.

We go in-depth on implants and discuss the benefits of Zirconia and Titanium.

Today's episode has been brought to you by our friends at Ivoclar! Alan is joined by dental superstar Dr. David Rice! Dave and Al recently spent some time together at the Chicago midwinter and discuss David's thoughts on dental meetings and where they're going.  Then they launched into a discussion about zirconia! Did you know that not all zirconia is the same? David has recently written an article for Dental Economics entitled "The Why's and Y's of Zirconia!" and it's the subject of today's episode! What's the difference between the strongest zirconia and the prettiest zirconia? 3Y-->5Y zirconia Ask your lab what they're using! Ivoclar's IPS e.max ZirCAD Prime zirconia  Preparing teeth for zirconia restorations Cementing vs. bonding zirconia restorations David on podcasting! Some links from the show: IPS e.max ZirCAD Prime zirconia Dentistry Unmasked podcast Dental Economics Dentistry IQ ZirCAD Prime blocks (podcast coming soon!)

Aleksandra Polczynski is an artist. Without even knowing what a dental technician was, she met and married a Master Dental Technician. The lab he worked at offered her a job after looking at some of her drawings. From there a passion and a career was born. She nailed her first few wax ups and was soon a ceramist. After partnering up with companies like GC America (https://www.gc.dental/america/) and Straumann (https://www.straumann.com/us/en/dental-professionals.html), Aleksandra was soon teaching others the art of full arch composite and staining. Wanting to do more, she partnered up with a dentist and opened Visual Dental Arts (https://www.facebook.com/p/Visual-Dental-Arts-100063516994366/) where she gets to work one-on-one with patients to give them the results they want. Aleksandra talks about her life in office, teaching, the craziness of Lab Day Chicago, and how she embraced technology to enhance her analog and artistic side. Did you know that not all Zirconia is the same? ZirCAD Prime (https://www.ivoclar.com/en_li/products/digital-processes/ips-e.max-zircad-prime-family) Zirconia from Ivoclar (https://www.ivoclar.com/en_us) is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength. ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Tell them you heard it on the podcast and get a FREE Prime disc to try – just use promo code 723! Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth (https://vitanorthamerica.com/en-US/VITA-MFT-Anterior-369,273,126133.html) are the ultimate solution for creating lifelike and stunning smiles. Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA (https://vitanorthamerica.com/) believes in the power of experiencing excellence firsthand, for a limited time only, they're offering you the chance to get a complimentary case sample. That's right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft (https://www2.vitanorthamerica.com/mft/) Don't wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you're ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store. Join the VITA family today. Join Elvis & Barb as Voices From the Bench goes international! On May 9th and 10th, the podcast will be recording at https://exocad.com/insights2024 on the beautiful Spanish island of Mallorca (https://www.seemallorca.com/). This is a fantastic educational event for all of you in the lab industry – and your clinical colleagues! The international speaker line-up is top-notch. There will be: keynote presentations from master dental technicians, digital experts, implant surgeons, lab owners, and more! Exocad's software experts will run hands-on sessions so you can get to know the latest releases…including DentalCAD 3.2 Elefsina (https://exocad.com/our-products/dentalcad-elefsina)…which was released recently. Techs…. Do you have a problem with a design? Just bring your stl file and let the Application Specialists take a look at it. Check out exocad.com/insights2024 to see the AMAZING line up of speakers and to register. Use promo code VFTB15 to save 15% off registration to what will be one of the greatest events of the year. See you there! Special Guest: Aleksandra Polczynski.

We are all back from Lab Day and very tired.... but yet we are still all going to the bench because the work never stops. THANK YOU Ivoclar, for hosting us over the weekend! This week we get to meet John Rano. John's dad was a dental technician, so it only made sense that John would end up in the family business. At the age of 14, John started learning what he could. By 18, he was doing conversions. But John wanted more. So after working at another lab and learning even more, John opened Unique Solutions Dental Lab (https://www.uniquesolutionsdentallab.com/). John comes on to talk about his journey, what he learned about providing a positive environment for new employees, and using digital for his full arch workflow. Did you know that not all Zirconia is the same? ZirCAD Prime (https://www.ivoclar.com/en_li/products/digital-processes/ips-e.max-zircad-prime-family) Zirconia from Ivoclar (https://www.ivoclar.com/en_us) is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength. ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Tell them you heard it on the podcast and get a FREE Prime disc to try – just use promo code 723! Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth (https://vitanorthamerica.com/en-US/VITA-MFT-Anterior-369,273,126133.html) are the ultimate solution for creating lifelike and stunning smiles. Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA (https://vitanorthamerica.com/) believes in the power of experiencing excellence firsthand, for a limited time only, they're offering you the chance to get a complimentary case sample. That's right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft (https://www2.vitanorthamerica.com/mft/) Don't wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you're ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store. Join the VITA family today. Candulor (https://www.candulor.com/en-us) a dental supply company from Switzerland has solutions no matter if you are analog or digital Check out their PhysioSet TCR (https://www.candulor.com/en-us/product-portfolio/tooth-lines/physioset-tcr) tooth line that has been complemented with 18 new shapes. A total of 48 age-appropriate anterior tooth shapes are available for the laboratory or dental practice to select from. The Swiss School of Prosthetics (https://ssop.swiss/en-us) in Springfield, Missouri is the place to learn all things removable. America with get supported and supplied by the only authorized partner Edmonds Dental Supply (https://edmondsdentalsupply.com/) Candulor, High End Only Special Guest: John Rano.

✅اپیزود میانی✅⚡️⚡️⚡️در قسمت❌ دوازدهم❌In-Sight در مورد مقایسه ی رستوریشنهای از جنس زیرکونیای مونولیتیک و رستوریشنهای فلز سرامیک در تک ایمپلنتهای ناحیه ی خلفی صحبت میکنیم.این ابسترکت مقاله مربوط به JPD هست و مقاله سیستماتیک ریویو هستش.‼️‼️پادکست In-Sight مجموعه ای از پادکستهای کوتاهه که در اون ها ما بدون پرداختن به جزئیات ،خلاصه ی مقالات را مرور میکنیمپادکست In-Sight اپیزود میانی دنتکستهاستدکتر فواد شهابیان متخصص پروتز ،ایمپلنت زیباییاهواز کیانپارس061 3338 0090⚡️⚡️لینک ابسترکت مقاله❌❌

Be sure to come see us in the Ivoclar (https://www.ivoclar.com/en_li) Ballroom during LMT Lab Day Chicago 2024 (https://lmtmag.com/lmtlabday). Register today! Resin 3D printing is going strong in our industry. Almost to the point of not remembering how we functioned without one. Well it's time for the next "phase" of 3D printing. Metal. This week we talk to Josh Williams from GPS Digital RPD (https://gpsdigitalrpd.com/) in Orlando, Florida. Josh runs a 100% digital metal printing facility specializing (as of now) in partial frameworks. He talks about his early days of learning the analog method of making frames, owning his own lab in a bait shop, and partnering up with GPS Dental (https://gpsdental.com/) to take it all digital. Josh also talks about researching the printers, the complete workflow, how they overcame issues, and some of the maintenance these highly fascinating machines take to produce perfect fitting metal frameworks. What we love is that Josh doesn't sell printers or metal. He just uses them every day making frames for only other labs that need a good and reliable solution for their doctors. Did you know that not all Zirconia is the same? ZirCAD Prime (https://www.ivoclar.com/en_li/products/digital-processes/ips-e.max-zircad-prime-family) Zirconia from Ivoclar (https://www.ivoclar.com/en_us) is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength. ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Tell them you heard it on the podcast and get a FREE Prime disc to try – just use promo code 723! Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth (https://vitanorthamerica.com/en-US/VITA-MFT-Anterior-369,273,126133.html) are the ultimate solution for creating lifelike and stunning smiles. Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA (https://vitanorthamerica.com/) believes in the power of experiencing excellence firsthand, for a limited time only, they're offering you the chance to get a complimentary case sample. That's right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft (https://www2.vitanorthamerica.com/mft/) Don't wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you're ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store. Join the VITA family today. Candulor (https://www.candulor.com/en-us) a dental supply company from Switzerland has solutions no matter if you are analog or digital Check out their PhysioSet TCR (https://www.candulor.com/en-us/product-portfolio/tooth-lines/physioset-tcr) tooth line that has been complemented with 18 new shapes. A total of 48 age-appropriate anterior tooth shapes are available for the laboratory or dental practice to select from. The Swiss School of Prosthetics (https://ssop.swiss/en-us) in Springfield, Missouri is the place to learn all things removable. America with get supported and supplied by the only authorized partner Edmonds Dental Supply (https://edmondsdentalsupply.com/) Candulor, High End Only Special Guest: Josh Williams.

Today we'll be discussing zirconia, arguably the most popular and talked about material in indirect restorative dentistry. To tell us why the rage and what to look for, is our guest Dr. Larry Grillo. He is the founding partner in a three partner, three associate practice in South Florida. He has over 30 years of experience in general practice with an emphasis on aesthetics, implants, crown and bridge & veneers.

⚡️⚡️⚡️در قسمت❌ هشتم ❌In-Sight در مورد مقایسه ی موفقیت کلینیکی رستوریشنهای زیرکونیای مونولیتیک و زیرکونیای layered در درمان تمام قوس ایمپلنتی صحبت میکنیم.این مقاله ی systematic review مربوط به JPD هستش.‼️‼️پادکست In-Sight مجموعه ای از پادکستهای کوتاهه که در اون ها ما بدون پرداختن به جزئیات ،خلاصه ی مقالات را مرور میکنیمپادکست In-Sight اپیزود میانی دنتکستهاستدکتر فواد شهابیان متخصص پروتز ،ایمپلنت زیباییاهواز کیانپارس061 3338 0090⚡️⚡️لینک ابسترکت مقاله❌❌

Be sure to get a SUPER LIMITED edition ZIPPERED HOODIE (or shirt) before JANURARY 6th. Get your "Dental Technicians: Making Dentist Look Good Since the 1700s" HERE! (https://www.bonfire.com/vftb-the-zippered-hoodie-era/) HAPPY 2024! We are super excited to start another year of the podcast with a wonderful guest that is a ceramist in London. Alina CeClan's mother recommended a dental technology school while she was in Romania. Not loving it at first, she struggled. But by the third year she was as obsessed with teeth as the rest of us. Love took her to the UK where she discovered that she is more suited for quality over quantity and fell in love with MIYO. Now she's killing it on Instagram and teaching others in other countries her skills. Did you know that not all Zirconia is the same? ZirCAD Prime (https://www.ivoclar.com/en_li/products/digital-processes/ips-e.max-zircad-prime-family) Zirconia from Ivoclar (https://www.ivoclar.com/en_us) is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength. ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Tell them you heard it on the podcast and get a FREE Prime disc to try – just use promo code 723! Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth (https://vitanorthamerica.com/en-US/VITA-MFT-Anterior-369,273,126133.html) are the ultimate solution for creating lifelike and stunning smiles. Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA (https://vitanorthamerica.com/) believes in the power of experiencing excellence firsthand, for a limited time only, they're offering you the chance to get a complimentary case sample. That's right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft (https://www2.vitanorthamerica.com/mft/) Don't wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you're ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store. Join the VITA family today. Candulor (https://www.candulor.com/en-us) a dental supply company from Switzerland has solutions no matter if you are analog or digital Check out their PhysioSet TCR (https://www.candulor.com/en-us/product-portfolio/tooth-lines/physioset-tcr) tooth line that has been complemented with 18 new shapes. A total of 48 age-appropriate anterior tooth shapes are available for the laboratory or dental practice to select from. The Swiss School of Prosthetics (https://ssop.swiss/en-us) in Springfield, Missouri is the place to learn all things removable. America with get supported and supplied by the only authorized partner Edmonds Dental Supply (https://edmondsdentalsupply.com/) Candulor, High End Only Special Guest: Alina Ceclan.

⚡️⚡️⚡️در قسمت❌ چهارم ❌In-Sight طبق یکی‌از آخرین مقالات JPD توضیح میدیم برای تنظیم زیرکونیاکدوم فرز مناسبتره.این مقاله مربوط به JPD هستش.‼️‼️پادکست In-Sight مجموعه ای از پادکستهای کوتاهه که در اون ها ما بدون پرداختن به جزئیات ،خلاصه ی مقالات را مرور میکنیمپادکست In-Sight اپیزود میانی دنتکستهاستدکتر فواد شهابیان متخصص پروتز ،ایمپلنت زیباییاهواز کیانپارس061 3338 0090⚡️⚡️لینک ابسترکت مقاله❌❌ Hosted on Acast. See acast.com/privacy for more information.

The Billion Dollar Podcast is weekly business insight by Dr. George Hariri and Dr. Matt Guarino. These business partners look through the REAL lens of business development, realities of the world and their personal / professional lives. We talk facts, and we talk candidly, so you've been warned! Outside of The Billion Dollar Podcast, George is the CEO of Shared Practices, Matt is the COO and together, co-host the Shared Practices podcast.   http://bdppod.com/

Opperman Live - His name was RICO He wore a Cubic zirconiaSeptember 2Guess what issue Ed is discussing in this episode. I doubt I need to tell you. But how has Trump managed to cash in on his many transgressions? Is it right to paint yourself as a martyr with your mugshot? Does it make him stronger or damage his campaign? And is Fani Willis wrong, that no matter who you are in America, you are the same in the eyes of the law?We also remember all those people who have appeared or supported the Opperman Report who are no longer with us. With the passing of Daniel Hopsicker recently, the world is a poorer place.This show is part of the Spreaker Prime Network, if you are interested in advertising on this podcast, contact us at https://www.spreaker.com/show/1198501/advertisement

On today's episode, Dr. Mark Costes is joined by Dr. Dan Briskie and Dr. Taher Dhoon from the Colorado Surgical Institute (CSI) for another enlightening Surgical Saturday. The trio, along with special guests Jamie Levine and Brittany Sherwin from NeoDent, dive into a comprehensive discussion comparing different implant types and protocols, with a spotlight on zirconia implants. The episode kicks off with Dr. Briskie sharing his journey from skepticism to acceptance concerning zirconia implants, attributing the shift to increased patient demand driven by aesthetic preferences and theoretical allergy concerns related to titanium. Brittany Sherwin chimes in on the historical evolution and adoption of zirconia implants, emphasizing NeoDent's innovative two-piece ceramic design tailored for aesthetic and immediate loading protocols. A substantial portion of the discussion is dedicated to contrasting the placement protocols of zirconia and titanium implants, led by Dr. Briskie. He elaborates on the need for a delicate approach when handling zirconia implants to prevent cracking, a common issue attributed to the difference in torque requirements between zirconia and titanium. The discussion navigates through the detailed steps of preparing the osteotomy, the use of bone taps, and the importance of adhering to specified RPM and torque values to ensure the successful placement of zirconia implants. Dr. Dhoon supplements the conversation by sharing his own experiences and the need to unlearn some muscle memory associated with titanium implant placement to accommodate the delicate nature of zirconia. The episode is rich with practical insights, offering listeners a deep dive into the nuanced world of implantology, especially the emerging trend and protocols surrounding zirconia implants. Dr. Briskie and Dr. Dhoon's shared experiences and the information provided by the NeoDent representatives make this episode a valuable resource for dental practitioners keen on staying updated with the evolving landscape of dental implant materials and techniques. Don't miss out on the upcoming event from CSI. Explore and register here: https://www.coloradosurgicalinstitute.com/#1 EPISODE RESOURCES https://www.coloradosurgicalinstitute.com https://www.truedentalsuccess.com Dental Success Network Subscribe to The Dentalpreneur Podcast

Back in September, a group called the DTG (https://www.dentaltechniciansguild.com/) gathered for the first time in a while at the GC America (https://www.gc.dental/america/) facility in Alsip, Illinois. Luckily, we were honored to be a part of this amazing show. There was so many talented technicians in one room, our biggest regret is not getting to talk to all of them. BUT we did get two reluctant people to sit down and share their stories. First up is Shelia Raquel, president of White Peaks Dental Solutions USA (https://whitepeaks-usa.com/). Shelia talks about being a dental assistant in the military, working on the bench, and her new female empowered group called "Queens - Women in the Industry" (https://www.queenswomenintheindustry.com/). Next we sat down with Quint Whipple from Phoenician Dental Studio (https://www.phoeniciandental.com/). Quint talks about wanting to be a dentist, getting wise, working in Las Vegas, how occlusion affects overall health, and the history behind the famous DTG coins. Are you in the market for top-notch digital equipment, such as mills, scanners, or furnaces? Well, the time to act is NOW! Ivoclar (https://www.ivoclar.com/en_li), has introduced unbeatable rates exclusively for customers in North America. Ivoclar has made it easier for you to invest in cutting-edge digital equipment with lower-than-prime interest rates. Whether you're looking to upgrade your milling capabilities (https://www.ivoclar.com/en_li/products/digital-equipment/programill-dry), enhance your scanning technology (https://www.ivoclar.com/en_li/products/digital-equipment/prograscan-ps7-lab-scanner), or optimize your furnace performance (https://www.ivoclar.com/en_li/products/equipment/programat-ceramic-furnaces), Ivoclar Digital has you covered. To take advantage of this offer, the dedicated Digital Specialists at Ivoclar are ready to assist you. For details on how to get in touch, visit Voicesfromthebench.com and the Ivoclar tab to find all the information you need to get started. Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth (https://vitanorthamerica.com/en-US/VITA-MFT-Anterior-369,273,126133.html) are the ultimate solution for creating lifelike and stunning smiles. Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA (https://vitanorthamerica.com/) believes in the power of experiencing excellence firsthand, for a limited time only, they're offering you the chance to get a complimentary case sample. That's right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft (https://www2.vitanorthamerica.com/mft/) Don't wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you're ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store. Join the VITA family today. GC Initial® LiSi Press (https://www.gc.dental/america/products/laboratory/porcelain-systems/gc-initial-lisi-press) is the first lithium disilicate ceramic ingot with High Density Micronization (HDM), a technology unique to GC that provides exceptional physical properties and the most natural, life-like aesthetics. HDM uses equally dispersed lithium disilicate micro-crystals to fill the entire glass matrix rather than using traditional larger size crystals that do not take full advantage of the matrix structure. The result is the ultimate combination of strength and aesthetics, making GC Initial® LiSi Press perfectly suitable for all types of restorations through all levels of transparency. Most importantly, HDM technology helps ensure the product remains extremely stable, without distortion or drop in value, even after multiple firings. For more information call GC America (https://www.gc.dental/america/) at 800-323-0763 or visit gcamerica.com Special Guests: Quint Whipple and Sheila Raquel.

DOT - Use the Code DENTALDIGEST for 10% off olsenna.com Olsen Facebook Olsen Instagram Olsen Linkedin Olsen Youtube https://www.oneplacecapital.com/ Follow @dental_digest_podcast Instagram Follow @dr.melissa_seibert on Instagram Connect with Melissa on Linkedin Dr. Markus B. Blatz is Professor of Restorative Dentistry, Chairman of the Department of Preventive and Restorative Sciences and Assistant Dean for Digital Innovation and Professional Development at the University of Pennsylvania School of Dental Medicine in Philadelphia, Pennsylvania, where he also founded the Penn Dental Medicine CAD/CAM Ceramic Center, an interdisciplinary venture to study emerging technologies and new ceramic materials while providing state-of-the-art esthetic clinical care. Dr. Blatz graduated from Albert-Ludwigs University in Freiburg, Germany, and was awarded additional Doctorate Degrees, a Postgraduate Certificate in Prosthodontics, and a Professorship from the same University. Dr. Blatz is co-founder and past President of the International Academy for Adhesive Dentistry (IAAD) and a founding member of the European Academy of Digital Dentistry (EADD). He is a board-certified Diplomat in the German Society for Prosthodontics and Biomaterials (DGPro) and a member of multiple other professional organizations, including the American Academy of Esthetic Dentistry, the European Academy of Esthetic Dentistry, the International College of Prosthodontists, the American College of Prosthodontists (honorary member), Academy of Osseointegration, and O.K.U. Honor Dental Society. He is the Editor-in-Chief of Compendium of Continuing Education in Dentistry, Associate Editor of the Journal of Esthetic and Restorative Dentistry and of Quintessence International, Section Editor for the International Journal of Prosthodontics, and serves on the editorial boards of numerous other recognized scientific dental journals. He is coauthor of the international bestseller “evolution – contemporary protocols for anterior single-tooth implants”, which has been translated on over 8 languages. Prior to joining Penn Dental Medicine as Chairperson of the Department of Preventive and Restorative Sciences in September 2006, Dr. Blatz was at Louisiana State University (LSU) Health Sciences Center School of Dentistry in New Orleans, where he served as Chairman of the Department of Comprehensive Dentistry and Biomaterials and Assistant Dean for Clinical Research. During his tenure at LSU, Dr. Blatz also directed the Masters of Science in Oral Biology Program and was a senior faculty member in the Department of Prosthodontics. From 1994 to 1998 he was an Assistant Professor and from 1998 to 1999 a senior faculty member in the Department of Prosthodontics at Albert Ludwigs University Freiburg School of Dentistry in Freiburg, Germany. A widely published and internationally respected lecturer, Dr. Blatz's main focus within clinical practice and research is esthetic dentistry with an emphasis on implantology and dental materials, particularly ceramics and adhesion. Dr. Blatz is the recipient of multiple teaching and research awards and has published and lectured extensively on dental esthetics, restorative materials, and implant dentistry. He was recently named one of the “World's Top 100 Doctors in Dentistry”.

Nightshift Online Symposium! November 21: Removables with Jenelle Tabakovic and Emily Pittard (https://www.eventbrite.co.uk/e/nightshift-online-symposium-prosthetics-tickets-701562661807?aff=oddtdtcreator) November 22: Crown and Bridge with Dora Rodriges and Lisa Johnson (https://www.eventbrite.co.uk/e/nightshift-online-symposium-crown-and-bridge-tickets-701572671747?aff=oddtdtcreator) Check out Part 1 of the Dental Showdown by Ivoclar featuring Elvis Dahl and Dr. David Rice! (https://www.ivoclar.com/en_us/course/consistency-or-lack-thereof/168934?) Join us for a FREE and LIVE Ivoclar webinar on October 12 at 7:00 pm eastern time. (https://www.linkedin.com/events/thedentalshowdown-part2-deliver7113201623367131137/comments/) In 2024, an iconic company in the dental space will turn 100 years old! To start the celebration we welcome the Director of Marketing Communications with VITA North America (https://www.vitanorthamerica.com/) Sam Nekola to the podcast. Sam comes on to talk about her role, the history of VITA, many of the amazing products that make up their company, and how they plan to engage the customers as they turn 100. Also joining the podcast is VITA user and past podcast guest Mackenzie Mayer. Mackenzie updates us on her new lab, Bella Dental Studio (https://www.instagram.com/belladentalstudiollc/), why she loves VITA, and her hopes to teach others the VITA way of producing fantastic looking restorations. Did you know that Ivoclar (https://www.ivoclar.com/en_us) has Digital Equipment Sales Specialists (https://www.ivoclar.com/en_us/landing-pages/digital-equipment)? These experienced professionals are here to help make your transition to digital, a smooth one. They help provide customized solutions, analyze your ROI, provide hands on assistance and localized support. All of this, catered to your needs. Contact a Digital Equipment Sales Specialist today by emailing Digitalspecialists@ivoclar.com. Tell them you heard it on the podcast! Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth (https://vitanorthamerica.com/en-US/VITA-MFT-Anterior-369,273,126133.html) are the ultimate solution for creating lifelike and stunning smiles. Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA (https://vitanorthamerica.com/) believes in the power of experiencing excellence firsthand, for a limited time only, they're offering you the chance to get a complimentary case sample. That's right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft (https://www2.vitanorthamerica.com/mft/) Don't wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you're ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store. Join the VITA family today. Special Guests: MacKenzie Mayer and Sam Nekola.

We love dental legacies. When we got contacted by a dental technician that works in a dental office with 3 family members as dentists and another getting ready to graduate dental school, we knew a great story of a busy technician would be there. Dr. Jill Morris and Dr. Burr Bakke own World Class Dentistry (https://sarasotadentist.com/) in Sarasota, Florida dealing in high-end cosmetic work and ceramic implants. They are joined by their son, Dr. Cameron Johnson who specializes in ortho and airway. Both of the younger siblings went to the New York City Tech School of Restorative Dentistry (https://www.citytech.cuny.edu/restorativedentistry/). Sydney Johnson went on to dental school while Kelton Johnson became the in-office (https://sarasotadentist.com/team/higher-aesthetics-laboratory/) technician. They talk about family life, workflow, treatment planning, and leaving a legacy for future generations of this dental family. Did you know that not all Zirconia is the same? ZirCAD Prime (https://www.ivoclar.com/en_li/products/digital-processes/ips-e.max-zircad-prime-family) Zirconia from Ivoclar (https://www.ivoclar.com/en_us) is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength. ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Tell them you heard it on the podcast and get a FREE Prime disc to try – just use promo code 723! Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth (https://vitanorthamerica.com/en-US/VITA-MFT-Anterior-369,273,126133.html) are the ultimate solution for creating lifelike and stunning smiles. Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA (https://vitanorthamerica.com/) believes in the power of experiencing excellence firsthand, for a limited time only, they're offering you the chance to get a complimentary case sample. That's right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft (https://www2.vitanorthamerica.com/mft/) Don't wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you're ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store. Join the VITA family today. Special Guests: Dr. Burr Bakke, Dr. Cameron Johnson, Dr. Jill Morris , Kelton Johnson, and Sydney Johnson.

For the last three years, we have gone to the Ladies of the Mill (https://www.ladiesofthemill.com/) Summit and recorded a ton of amazing females in our industry. This year is no different and we talked to some fantastic people. First up, we had our first opportunity to record ON-STAGE in front of a LIVE audience with Jessica Scott and Mandy Arena. Then we had a conversation with the force behind the NADL (https://nadl.org/), NBC (https://nbccert.org/), and the FDLT (https://dentallabfoundation.org/), Rachel Luoma. After that we start our "Speed Recording" by spending just a few minutes with Jill Swafford, Christina Heaslip, Angelika Roseberry, Joetta Dixon, Amy Joers, and Becca Williams. It's jam packed with conversations, laughs, and new friendships. And it's only part 1...... Did you know that not all Zirconia is the same? ZirCAD Prime (https://www.ivoclar.com/en_li/products/digital-processes/ips-e.max-zircad-prime-family) Zirconia from Ivoclar (https://www.ivoclar.com/en_us) is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength. ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Tell them you heard it on the podcast and get a FREE Prime disc to try – just use promo code 723! Whether you are looking to elevate your craftsmanship or looking to cut back costs, look no further – VITA MFT Teeth (https://vitanorthamerica.com/en-US/VITA-MFT-Anterior-369,273,126133.html) are the ultimate solution for creating lifelike and stunning smiles. Crafted with precision and backed by cutting-edge technology, VITA MFT Teeth offers unparalleled esthetics and durability. And since VITA (https://vitanorthamerica.com/) believes in the power of experiencing excellence firsthand, for a limited time only, they're offering you the chance to get a complimentary case sample. That's right, a full case, absolutely free. Just visit vitanorthamerica.com/freemft (https://www2.vitanorthamerica.com/mft/) Don't wait any longer to start providing your customers with a premium tooth at an economy price. Redeem your free case sample and if you're ready to buy, VITA will even give you an extra 10% discount by shopping online on their newly launched online store. Join the VITA family today. Special Guests: Amy Joers, Angelika Roseberry, Becca Williams, Christina Heaslip, Jessica Scott, Jillian Swafford, Joetta Dixon, Mandy Arena, and Rachel Luoma.

Prime Zirconia: White and Pink Esthetics: Ivoclar is having two amazing in-house training sessions in September featuring Jurgen Seger. September 7 & 9 in Mississauga, Ontario, Canada (https://www.ivoclar.com/en_us/course/prime-zirconia---white-and-pink-esthetics/159773) September 11& 12 in Amherst, NY, USA (https://www.ivoclar.com/en_us/course/prime-zirconia---white-and-pink-esthetics/155360) SAVE 30% by using the code: VFTB30 You and a friend can each save 50% by emailing Nicola.Kowal@ivoclar.com and telling them you heard it on Voices From the Bench! TOPICS INCLUDE: * Choice of zirconia material related to strengths, esthetics and efficiency * Design nesting and milling strategies for Multi Zirconia * Infiltration options * Processing monolithic restorations surface finish, staining * Gingiva microlayering different pink ceramic colors * Tooth microlayering management of color and 3D effects. * Key tips related to firing aspects for zirconia bridge structures * Micro and macrotexture of the tooth surface On August 27th many brave and fearless dental technicians will take to the water and road to participate in the 2023 Chicago Triathlon (https://www.chicagotriathlon.com/). They don't do it for fame or personal gain, but to raise money for the Foundation For Dental Laboratory Technology (https://dentallabfoundation.org/). PLEASE head over to dentallabfoundation.org (https://dentallabfoundation.org/) and click the DONATE TODAY button. Log in and choose the “Race for the Future” option. There you can put the name of a racer you want to sponsor. You can put: Barb Warner Team Abutments (Elvis Dahl, Mark Williamson, Bobby Kennedy) Voices From the Bench (50/50 split between Barb and Elvis' team) It's always sad when good things come to an end and this week we bring you the last of all the amazing conversations Elvis and Barb got when Ivoclar (https://www.ivoclar.com/en_us) partnered up with us to record at LMT (https://lmtmag.com/) Lab Day West 2023. First up is a 45-year veteran of removable dentures, Glen Smith. Glen comes on to talk about how his lab, Robertson Lab (https://www.robertsondentallab.com/) (part of the Apex Dental Laboratory Group (https://www.apexlabgroup.com/)) can do so much of their removables digitally. Even after all this time, Glen is full of excitement and passion for this workflow. He talks about the workflow, automating certain steps, and training the next generation of lab technician. Then a “movie star” in our industry stops by, Gary Archer. Gary makes custom dental prosthetics for movies and television shows. He talks about what shows he is working on, some recent movies where his teeth have been featured, the stories behind them, and how he makes some with removable teeth for gory scenes. Did you know that not all Zirconia is the same? ZirCAD Prime (https://www.ivoclar.com/en_li/products/digital-processes/ips-e.max-zircad-prime-family) Zirconia from Ivoclar (https://www.ivoclar.com/en_us) is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength. ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Tell them you heard it on the podcast and get a FREE Prime disc to try – just use promo code 723! Special Guests: Gary Archer and Glen Smith CDT TE.

On August 27th many brave and fearless dental technicians will take to the water and road to participate in the 2023 Chicago Triathlon (https://www.chicagotriathlon.com/). They don't do it for fame or personal gain, but to raise money for the Foundation For Dental Laboratory Technology (https://dentallabfoundation.org/). PLEASE head over to dentallabfoundation.org (https://dentallabfoundation.org/) and click the DONATE TODAY button. Log in and choose the “Race for the Future” option. There you can put the name of a racer you want to sponsor. You can put: Barb Warner Team Abutments (Elvis Dahl, Mark Williamson, Bobby Kennedy) Voices From the Bench (50/50 split between Barb and Elvis' team) Come see Elvis and Barb on stage together for the first time as we record an episode in front of a live audience! Register for the Ladies of the Mill Summit in Chattanooga, TN on July 21-22 (https://www.ladiesofthemill.com/) Long before this crazy hot summer even started, Ivoclar (https://www.ivoclar.com/en_us) invited Elvis and Barb to set up and record at LMT (https://lmtmag.com/) Lab Day West. As soon as the crowds started, the recording took off and this week we talk to three wonderful people. First up is Amber Rodriguez from Preat (https://www.preat.com/). Amber was speaking for the first time, so of course we talked about that, but we also talk about her going from no implant experience to becoming known for her vast knowledge of implants and attachments and how they handle discontinued implant systems. Then we had the extreme pleasure of meeting two ROCK STARS in our industry. Long before scanners, mills, and printers there were technicians making their own tools for a better workflow and if you do it well enough, someone else will buy it. That is what Robert and Ardith Berger did when they started Belle de St. Claire. With over 500 products and 21 patents, they invented many tools and equipment that became staples in analog dental labs. They reflect on those early days, how they changed the industry, and what they did when it was time to move on. Did you know that not all Zirconia is the same? ZirCAD Prime (https://www.ivoclar.com/en_li/products/digital-processes/ips-e.max-zircad-prime-family) Zirconia from Ivoclar (https://www.ivoclar.com/en_us) is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength. ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Tell them you heard it on the podcast and get a FREE Prime disc to try – just use promo code 723! Special Guests: Amber Rodriguez, Ardith Berger, and Robert Berger.

On August 27th many brave and fearless dental technicians will take to the water and road to participate in the 2023 Chicago Triathlon (https://www.chicagotriathlon.com/). They don't do it for fame or personal gain, but to raise money for the Foundation For Dental Laboratory Technology (https://dentallabfoundation.org/). PLEASE head over to dentallabfoundation.org (https://dentallabfoundation.org/) and click the DONATE TODAY button. Log in and choose the “Race for the Future” option. There you can put the name of a racer you want to sponsor. You can put: Barb Warner Team Abutments (Elvis Dahl, Mark Williamson, Bobby Kennedy) Voices From the Bench (50/50 split between Barb and Elvis' team) Come see Elvis and Barb on stage together for the first time as we record an episode in front of a live audience! Register for the Ladies of the Mill Summit in Chattanooga, TN on July 21-22 (https://www.ladiesofthemill.com/) Back in May, Elvis and Barb loaded up the gear and headed out to LMT (https://lmtmag.com/) Lab Day West to record some of the amazing people that attend that show. Thanks to Ivoclar (https://www.ivoclar.com/en_us), a table was set up in the main hall and a constant flow of conversations happened. This week we start off talking with the President of the National Association of Dental Laboratories (https://nadl.org/), Heather Voss. Heather is on a dental lab show tour this year to promote community engagement with the industry. Heather talks about the NADL, some of the great things they are working on, and why a lab should join. Then the man who can fix anything stops by the table, Daniel Serrago, owner of Garland Dental Services (https://garlanddental.com/). Daniel talks about getting into the handpiece repair business, accidentally discovering dental labs, moving his skills to more modern equipment, and some interesting facts he's learned along the way. Did you know that not all Zirconia is the same? ZirCAD Prime (https://www.ivoclar.com/en_li/products/digital-processes/ips-e.max-zircad-prime-family) Zirconia from Ivoclar (https://www.ivoclar.com/en_us) is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength. ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Special Guests: Daniel Serrago and Heather Voss MBA, CDT.

Send us your audio thanks to celebrate CDT and Dental Technology Appreciation Month. Every episode in June we will feature technicians thanking the ones that have made a positive impact on their dental Journey. It's super easy and fun. Just record yourself on your phone or computer. Just say your name, where you are from, who you are thanking, and why. Then email it to info@voicesfromthebench.com. Get a shirt that highlights "Dental Technicians Have Better Technique". Head over to https://www.bonfire.com/we-have-better-technique-the-shirt/ before June 10th to order a shirt, hoodie, or even a tank top. 100% of the profits are donated to the Foundation of Dental Laboratory Technology. (https://dentallabfoundation.org/) Ever hear of a Crozat (https://www.instagram.com/daily_crozat/) appliance? We haven't either, but luckily this week we talk to one of the only four technicians that makes these palate expanding devices, Jay Work III. Jay tells the amazing story of stumbling upon a gentleman specializing in these wire devices and after some persistent bugging agreed to teach him. Jay explains what a Crozat is, what it does, and why they are so hard to make. It's a fascinating conversation about a little known appliance that hardly anyone makes but is in high demand. Did you know that not all Zirconia is the same? ZirCAD Prime (https://www.ivoclar.com/en_li/products/digital-processes/ips-e.max-zircad-prime-family) Zirconia from Ivoclar (https://www.ivoclar.com/en_us) is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength. ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Special Guest: Jay R. Work III.

Send us your audio thanks to celebrate CDT and Dental Technology Appreciation Month. Every episode in June we will feature technicians thanking the ones that have made a positive impact on their dental Journey. It's super easy and fun. Just record yourself on your phone or computer. Just say your name, where you are from, who you are thanking, and why. Then email it to info@voicesfromthebench.com. Get a shirt that highlights "Dental Technicians Have Better Technique". Head over to https://www.bonfire.com/we-have-better-technique-the-shirt/ before June 10th to order a shirt, hoodie, or even a tank top. 100% of the profits are donated to the Foundation of Dental Laboratory Technology. (https://dentallabfoundation.org/) In a time where many are saying the labs are closing or consolidating, here on the podcast we hear about labs owners killing it every week. This episode features a technician that went out to prove to everyone that this industry is still a great profession to find success. Daniel Hassler learned all about dental technology in the Airforce. After his service he traveled to a few states and bettered his skills at a few different labs. Then in October 2022, Daniel opened "Wizards of the Bench" and was a instant success and he's so busy, he's already looking at bring on other technicians. It's a great (and shorter) conversation proving once again that this is a great industry for those wanting a career worth working for. Did you know that not all Zirconia is the same? ZirCAD Prime (https://www.ivoclar.com/en_li/products/digital-processes/ips-e.max-zircad-prime-family) Zirconia from Ivoclar (https://www.ivoclar.com/en_us) is uniquely produced with Gradient Technology which allows two powders that normally sinter at different intervals, to be combined into one material which sinters uniformly. The manufacturing process not only optimizes the translucent properties but also creates a seamless progression of shade while maintaining optimal strength. ZirCAD prime is now more affordable than ever and will give you results that your Dentists will notice! Contact your local Ivoclar Sales representative today to find out more about Prime and how Ivoclar can support your success! Special Guest: Daniel Hassler.

We all know the struggle of placing posterior pre-fabbed zirconia crowns on primary molars. Sometimes they fit like a glove, and sometimes they become a hot dumpster fire where you try 5 different crowns and none of them fit. Dr. Chad Davis, a pediatric dentist out of Arizona, and Dr. Andrew Johnson, a prosthodontist out of Arkansas, have worked together to develop Alphabyte. Alphabyte is a scanning system that allows you to quickly scan a primary molar and determine the correct crown size along with reduction discrepancies via a heat map to improve speed and efficiency with placing posterior crowns. Chad and Andrew come on the podcast to discuss how they developed this system, and how Alphabyte has practical applications beyond zirconia crowns. They will be at AAPD at the Kinder Crown booth where attendees can get a hands-on demo to see how the product works. You can learn more at https://alphabytedental.com/

Open wide everybody – today's episode takes us back into the mighty mouth for a special exploration of all things oral health with my own personal dentists and world class experts in the field, Drs. Stuart M. Nunnelly and Candice Owens. We're reminded of the stark truths about fluoride and modern dentistry before learning all about parasites, deleterious dead teeth, and the many serious risks presented by root canal procedures, the long list of which being the main reason why Drs. Nunnelly and Owens do not currently offer the otherwise widely accepted treatment at their practice here in Texas. But it's not all gloom, doom, and decay in this one. Their holistic approach to dentistry, steeped in the wisdom of two research legends which we give a nod to, is one we can all root for. What's more, we hear a little bit about how and why the psychospiritual realm is so important in this space. In layman's terms, going to the dentist shouldn't be a nightmare. With these two, and others on the right side of the science, it isn't. Enjoy.    00:06:43 — Holistic vs. Traditional Dentistry  What's new in the field Emphasizing the patient experience Appreciating the legacy of Weston Price Learning under and working with Hal Huggins Learning the shocking truth about fluoride  Breath: The New Science of a Lost Art by James Nestor Impact of lifestyle and nutrition   00:29:36 — Amalgam Fillings & Mercury Exposure Why mercury is used in dentistry Do all fillings contain mercury? The 5G EMF Apocalypse & Why Health Food Won't Save You with Dr. Jack Kruse #191 Galvanic energy currents Zirconia vs. titanium implants  Luke's negative experience with oral surgery  Mercury filling removal protocol (SMART) 00:53:20 — The Mighty Microbiome in Our Mouths Masking's negative effect on oral health Acid reflux and tooth enamel Identifying patterns in tooth care Harmful oral parasites (Amoeba and spirochaetes)  Dr. Dwight Jennings Bonus Show: Luke's Shocking Dental Exam #321 Nano hydroxyapatite to restore enamel  Use of a water pick to reach sneaky bacteria 01:05:57 — Unpacking the Evolving Reality of Root Canals Average lifespan of a root canal – 11 years Increased risk for infection and cardiovascular event The deleterious dead tooth The link between root canals and depression (Published research) When is a tooth a lost cause? Safe teeth whitening tips Facebook group rapid-fire questions  The International Academy of Oral Health & Toxicology    More about this episode. Watch on YouTube.   THIS SHOW IS BROUGHT TO YOU BY: BRAND LINK ALL CAPS. Description goes here. CTA with link in bold. AND... BRAND LINK ALL CAPS. Description goes here. CTA with link in bold. AND… BRAND LINK ALL CAPS. Description goes here. CTA with link in bold. AND… BRAND LINK ALL CAPS. Description goes here. CTA with link in bold.   Resources Learn more about Nunnally, Freeman & Owens Find a holistic dentist near you — The International Academy of Oral Health & Toxicology  Are you ready to block harmful blue light, and look great at the same time? Check out Gilded By Luke Storey. Where fashion meets function: gildedbylukestorey.com Join me on Telegram for the uncensored content big tech won't allow me to post. It's free speech and free content: www.lukestorey.com/telegram Related Episodes Dr. Dwight Jennings Bonus Show: Luke's Shocking Dental Exam #321 Dr. David Villarreal: How To Protect Your Teeth From Dumb Dentistry #35