Podcasts about 8V

  • 26PODCASTS
  • 58EPISODES
  • 28mAVG DURATION
  • 1EPISODE EVERY OTHER WEEK
  • Oct 3, 2024LATEST

POPULARITY

20172018201920202021202220232024


Best podcasts about 8V

Latest podcast episodes about 8V

Adafruit Industries
EYE ON NPI - ams OSRAM TMF8806 Single-Zone direct Time of Flight sensor

Adafruit Industries

Play Episode Listen Later Oct 3, 2024 12:19


This week's EYE ON NPI is having Too Much Fun - it's the ams OSRAM TMF8806 Single-Zone direct Time of Flight sensor (https://www.digikey.com/en/product-highlight/a/ams/tmf8806-single-zone-tof) the latest in ams' series of ToF sensors. This sensor may seem like "YAToF" but there's a few things that caught our eye. One is the excellent pricing, about $2 in quantity. Another is the simplicity of function: unlike many ToF sensors, there isn't a massive firmware stack required to load on each boot. Instead, the default firmware is in ROM for a lightweight interface. We've stocked ToF sensors (https://www.adafruit.com/search?q=tof) for quite a while - mostly the ST VL series. These sensors have developed quite a bit over the years, starting with the 100mm-range VL6180 (https://www.adafruit.com/product/3316) and continuing onto multi-grid devices that we've covered on previous EYE ON NPI's (https://www.youtube.com/watch?v=3PocFz427NE). The way these work is by blasting laser pulses out of a VCSEL (https://en.wikipedia.org/wiki/Vertical-cavity_surface-emitting_laser) which then bounces off of the target and the 'time of flight' is measured in the pF range to give accuracy and range. Easy to describe, but non-trivial to implement...the light doesn't bounce off perfectly, and a lot of individualy measurements need to be taken and then averaged - this is called the histogram. The histogram data is filtered in software to toss outliers and double-bounces, to get the 'true' calibrated distance. And it has to do this dozens of times a second. The complexity of the algorithm is what gives each product its accuracy, precision, repeatability and range - so its no surprise that its running on an in-package microcontroller. However, as the sensors have gotten more advanced, the firmware process has also gotten complex: for many ToF sensors you have to 'load' the firmware algorithm on boot (https://github.com/STMicroelectronics/stm32-vl53l5cx/blob/main/modules/vl53l5cx_buffers.h#L33) and even if you don't, its a non-trivial port to other platform. That's what caught our eye for the ams OSRAM TMF8806 (https://www.digikey.com/short/f9v8w20d), the description specifies "No FW download is required to operate this device, saving host MCU memory space, reducing startup time, and saving overall system power by enabling customers to quickly start the device and make measurements in a few milliseconds". The interface is trivial, they even provide the I2C commands required to boot, load firmware, and perform a reading, its about a dozen commands. For hardware, it's also a nice and simple integration - with a small OLGA package, I2C communication, and 1.8V or 3.3V logic level. One thing to watch for, the sensor comes with 3 'modes' - short, medium and long range. Minimum range for all of these is 10mm, the max is 200, 2500 or 5000mm. And,while the sensor can do 5000mm, it requires pretty specific calibration and lighting. The default range is 2500 and we recommend sticking to that if you can because then you get the benefit of built-in configuration and calibration for speed/simplicity. To get started fast, ams OSRAM supplies multiple drivers for Arduino or other C microcontrollers (https://github.com/ams-OSRAM/tmf8806_driver_arduino), generic Python (https://github.com/ams-OSRAM/tmf8806_driver_python) and Linux kernel (https://github.com/ams-OSRAM/tmf8806_driver_linux). You can also grab an eval board in 'shield' format that has a microcontroller for plug-and play usage (https://www.digikey.com/en/products/detail/ams-osram-usa-inc/TMF8806-EVM-EB-SHIELD/24768739) Add low power, super fast ToF sensing to your next design with the ams OSRAM TMF8806 Single-Zone direct Time of Flight sensor (https://www.digikey.com/short/f9v8w20d), in stock for immediate shipment from DigiKey! Order today and it will ship to you at pico-second speed, so that you can be integrating it by tomorrow morning.

Specialisterna podcast
461. Stor man-special

Specialisterna podcast

Play Episode Listen Later Jul 28, 2024 66:09


Anton Magnusson och Simon Gärdenfors pratar om olika saker. Det finns en massa bonusavsnitt för dig som donerar pengar till den här podden på Patreon: https://www.patreon.com/specialisternaI sommar åker vi ut med Specialisterna! Livepodd & standup. Biljetter på specialisterna.seGöteborg - 1/8Malmö - 5/8Växjö - 6/8Kalmar - 7/8Stockholm - 8/8Albin Olsson, Anton Magnusson och Simon Gärdenfors! Hosted on Acast. See acast.com/privacy for more information.

Specialisterna podcast
460. Medlidande-special

Specialisterna podcast

Play Episode Listen Later Jul 22, 2024 73:36


Anton Magnusson och Simon Gärdenfors pratar om olika saker. Det finns en massa bonusavsnitt för dig som donerar pengar till den här podden på Patreon: https://www.patreon.com/specialisternaI sommar åker vi ut med Specialisterna! Livepodd & standup. Biljetter på specialisterna.seGöteborg - 1/8Malmö - 5/8Växjö - 6/8Kalmar - 7/8Stockholm - 8/8Albin Olsson, Anton Magnusson och Simon Gärdenfors! Hosted on Acast. See acast.com/privacy for more information.

Specialisterna podcast
459. Älta-special

Specialisterna podcast

Play Episode Listen Later Jul 14, 2024 64:23


Albin Olsson, Simon Gärdenfors och Johannes Brenning pratar om olika saker. Det finns en massa bonusavsnitt för dig som donerar pengar till den här podden på Patreon: https://www.patreon.com/specialisternaI sommar åker vi ut med Specialisterna! Livepodd & standup. Biljetter på specialisterna.seGöteborg - 1/8Malmö - 5/8Växjö - 6/8Kalmar - 7/8Stockholm - 8/8Albin Olsson, Anton Magnusson och Simon Gärdenfors! Hosted on Acast. See acast.com/privacy for more information.

Specialisterna podcast
458. Simons smärtsamma skilsmässa-special

Specialisterna podcast

Play Episode Listen Later Jul 7, 2024 72:36


Nu har det blivit dags att släppa det här avsnittet som spelades in 19:e Juni 2024. Simon, Anton och Albin pratar om Simons smärtsamma skilsmässa. Det finns en massa bonusavsnitt för dig som donerar pengar till den här podden på Patreon: https://www.patreon.com/specialisternaI sommar åker vi ut med Specialisterna! Livepodd & standup. Biljetter på specialisterna.seGöteborg - 1/8Malmö - 5/8Växjö - 6/8Kalmar - 7/8Stockholm - 8/8Albin Olsson, Anton Magnusson och Simon Gärdenfors! Hosted on Acast. See acast.com/privacy for more information.

Specialisterna podcast
457. Sexualkunskap-special

Specialisterna podcast

Play Episode Listen Later Jul 1, 2024 64:35


Albin, Anton och Simon pratar om olika saker. Det finns en massa bonusavsnitt för dig som donerar pengar till den här podden på Patreon: https://www.patreon.com/specialisternaI sommar åker vi ut med Specialisterna! Livepodd & standup. Biljetter på specialisterna.seGöteborg - 1/8Malmö - 5/8Växjö - 6/8Kalmar - 7/8Stockholm - 8/8Albin Olsson, Anton Magnusson och Simon Gärdenfors! Hosted on Acast. See acast.com/privacy for more information.

Specialisterna podcast
456. Frysmat-special

Specialisterna podcast

Play Episode Listen Later Jun 23, 2024 77:28


Anton och Simon pratar om olika saker. Det finns en massa bonusavsnitt för dig som donerar pengar till den här podden på Patreon: https://www.patreon.com/specialisternaI sommar åker vi ut med Specialisterna! Livepodd & standup. Biljetter på specialisterna.seGöteborg - 1/8Malmö - 5/8Växjö - 6/8Kalmar - 7/8Stockholm - 8/8Albin Olsson, Anton Magnusson och Simon Gärdenfors! Hosted on Acast. See acast.com/privacy for more information.

Adafruit Industries
EYE ON NPI - ams OSRAM's TCS3530 True Color Sensor

Adafruit Industries

Play Episode Listen Later May 9, 2024 12:14


This week's EYE ON NPI is catchy like an 80's pop song (https://www.youtube.com/watch?v=LPn0KFlbqX8), it's ams OSRAM's TCS3530 True Color Sensor (https://www.digikey.com/en/product-highlight/a/ams/tcs3530-true-color-sensor) It is a new light sensor from ams OSRAM that is pre-calibrated for CIE XYZ color temperature sensing output, without a lot of gnarly math! We're huge fans of ams's light sensors, one of our first sensor breakouts was the TSL2561, (https://www.digikey.com/en/products/detail/ams-osram-usa-inc/TSL2561T/3095179) a wide-input-range light sensor with an I2C interface. We followed that up with a breakout for the TCS34725 which can detect separate red, green, blue and clear channels. With a little math, color reflected off of objects can be calculated into RGB color-space - we used it to make an umbrella that matches whatever color it touches! (https://learn.adafruit.com/florabrella/) Since then, ams OSRAM has worked to create better light sensors that reduce the need for end-user calibration or a lot of microcontroller lifting. The chips have carefully tuned PN diodes to not only be able to report correct color values, but ideally also have little variation from sensor-to-sensor. The TCS3530 (https://www.digikey.com/short/qwt595fh) is the latest color sensor from ams OSRAM, and it's also their newest with XYZ color output! This means you can read CIE XYZ color values out directly from the driver, which is going to be the best way to model what a human eye sees (https://en.wikipedia.org/wiki/CIE_1931_color_space) - not just an optimal concept based on 'pure' RGB photodiodes. This makes it ideal for use with cameras, monitors, printers/copiers and other devices that have humans that are looking at the colors. By detecting ambient light temperature, monitors and camera sensors can adjust their white balance to have their color gamut appear more 'natural' even in yellowish incandescent or halogen, or blueish fluorescent light. The TCS3530 (https://www.digikey.com/short/qwt595fh) does this by having 8 separate PN diodes, each tuned to a specific frequency band, to cover from about 400nm to 750nm. The diodes are normalized by the ALS engine so that you don't get over-sensitivity to green or IR. The diodes are arranged in a 4-way symmetric array to get fully balanced readings across all frequencies: there's probably some reasoning to how the layout is done to avoid signal from one diode from affecting a nearby one, something ams has decades of experience with. A modulator and flicker detection system can sense light pulses such as those from incandescent bulbs (at 120 Hz) or monitors (30 to 60 Hz) so that we can sample at the same times during the wave, or sample long enough to capture a full waveform worth of light. Interfacing is fairly simple, although there are a few things to watch out for during integration. The sensor supports both I2C and I3C (https://www.youtube.com/watch?v=hC4zkvdVag4) so it's good for legacy or modern microprocessors. Note the chip requires no greater than 1.8V power and logic, so for 3.3V systems - a shifter will be necessary. Finally - the chip has a massive number of registers to tweak the settings. So while you could write a driver, you're probably best off using ams OSRAM's TCS3502 linux C kernel driver to base your implementation if you are not just using Linux/Android directly. If you want to add precision color sensing with pre-calibrated CIE XYZ outputs to your next design, the ams OSRAM's TCS3530 True Color Sensor (https://www.digikey.com/en/product-highlight/a/ams/tcs3530-true-color-sensor) is a top choice from a world leader in light sensing. And best of all, it's in stock right now at DigiKey for immediate shipment! Order today and you will get this compact all-in-one devices shipped to your door so you can start letting your true colors shine by tomorrow afternoon.

Amigo Catolico
A fé precisa ser vivida de coração

Amigo Catolico

Play Episode Listen Later Feb 6, 2024 5:30


Leitura do Evangelho de Jesus Cristo segundo Marcos 7,1-13 Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: “Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos”. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus, a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: “Honra teu pai e tua mãe”. E ainda: “Quem amaldiçoa o pai ou a mãe deve morrer”. 11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: “O sustento que vós poderíeis receber de mim é Corban, isto é, Consagrado a Deus”. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a Palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”. --- Send in a voice message: https://podcasters.spotify.com/pod/show/amigocatolico/message

Adafruit Industries
EYE on NPI - MPS MPM3510A 36 V 1.2 A Step-Down Converter

Adafruit Industries

Play Episode Listen Later Feb 5, 2024 9:12


This week's EYE ON NPI is one of a kind - it's the MPS MPM3510A 36 V 1.2 A Step-Down Converter from Monolithic Power Systems (https://www.digikey.com/en/product-highlight/m/mps/mpm3510a-36v-1-2a-step-down-converter). You might be asking yourself, "wait, is this the same Monolith that appeared in Kubrick's 2001 Space Odyssey (https://www.youtube.com/watch?v=ypEaGQb6dJk)?" Technically... no. But, we are talking about a new product that comes to you as a black oblong, and contains technology that will transform and evolve your schematic to the next level of existence. The MPM3510A and friends (https://www.digikey.com/short/5dv839jp) are part of the fully-integrated DC/DC converter family from MPS. These modules contain a step-down chip as well as an inductor - plus maybe a passive or two - to create a tiny buck converter that can take an input from 4.5V to 36V DC and convert it down to 0.8V to 36V, configurable with a resistor divider. Despite it's petite stature, it can source 1.2A, and as its an efficient DC/DC converter, no heatsink is required. With the high integration, you only need two resistors and two capacitors to complete the design. We first spotted these converters on Arduino boards like the Nano Every (https://www.digikey.com/en/products/detail/arduino/ABX00028/10239971) that need to be small and thin. Specifically, that's using the MPM3610A (https://www.digikey.com/en/products/detail/monolithic-power-systems-inc/MPM3610AGQV-Z/5292908), which is an earlier version of the MPM3510 which goes to 21V max instead of 36V. We also have a cute breakout for the MPM3610 with either 3.3V fixed (https://www.digikey.com/en/products/detail/adafruit-industries-llc/4683/12822323) or 5V fixed (https://www.digikey.com/en/products/detail/adafruit-industries-llc/4739/13175530) output. Files for those boards are available on GitHub under an open source license (https://github.com/adafruit/Adafruit-MPM3610-PCB) If you want to quickly integrate the MPM series, check out the downloadable footprints and 3D models available in the EDA Models page (https://www.digikey.com/en/models/7361650). And, even though layout is simple, you should still consult the datasheet to make sure you've got the right setup for the bulk capacitors and power fills, since 1.2A output is a fair amount. One trade-off of having such a small solution is that to get the combined package so small, the inductor has to be low inductance, which means that the PWM frequency of the DC/DC converter is 1-2 MHz. That means you won't be at the top of efficiency...for that you'd have to design a converter with lower frequencies and much bigger inductor. If you need more or less than 1.2A output, or a different range of voltages for inputs or outputs, there's a whole family available of MPM modules, from the diminutive 2mm x 2mm MPM3804 that works only up to 5V and 0.6A (https://www.digikey.com/en/products/detail/monolithic-power-systems-inc/MPM3804GG-Z/7361493) up the chonkin' MPM3686, with a 12x15x14mm body, and 20 Amps output. (https://www.digikey.com/en/products/detail/monolithic-power-systems-inc/MPM3686GRU/5298342) Thankfully, all these chips are yours to use! And, best of all, the MPS MPM3510A 36 V 1.2 A Step-Down Converter (https://www.digikey.com/short/5dv839jp) and friends are all in stock right now for immediate purchase from DigiKey. Order today and it will be shipped instantly, so that you can get your design completed and to market in record time: no worrying over your DC/DC converter design size, efficiency or component selection.

Predikningar Ryttargårdskyrkan

Eva-Marie HultbergEtt barn har föttshttps://www.ryttargardskyrkan.se/app/undervisning/evig-fader-ar4gcVad betyder det för dig och mig att när Gud föds som människa in i vår värld, när Jesus kommer till oss, så får han namnet Evig Fader? Och hur kan det vara ett hopp för vår värld, nu och för vår framtid? Vad säger det dig och mig och vår värld att barnet – Jesus - är Evig Fader?1: EvigVi som ofta hör om Gud, eller ofta är på gudstjänst och t ex sjunger om Gud, vi är så vana vid att använda ordet evig, så att vi kanske inte tänker på storheten i det ordet. Och det blir kanske mest ett slags tidsbegrepp. Evig tid – tid som aldrig tar slut. Evigt liv – liv som aldrig tar slut. Underbart i sig.Men att det används som egenskap på någon, på Gud, och på det här barnet som ska födas. Att Jesus är evig. Att vår Himmelske Fader är evig – det är ngt mer än en tidsangivelse.Det betyder att allt det han är, inte förändras, och att han aldrig försvinner, eller ruckas på eller plötsligt visar sig vara något annat eller någon annan. Det betyder både att han fanns före allt och att han finns utan slut. Att han inte kan vara olika mkt kärlek, allt utifrån dagsform, eller att något av hans godhet liksom kan rinna ut i sanden. Han blir inte dement, eller åldrad, eller svag. Han kan inte bli personlighetsförändrad. Han utvecklas inte och blir en annan personlighet. Han är evig. Evig som i pålitlig, som i bergfast, likadan, omöjlig att välta omkull, eller manipulera bort, slita ut, eller förbruka. Han är evig.2: Fader I Bibeln sägs det en del vackra saker om honom…I Efesierbrevet 3:14-15 ska Paulus be för församlingen och han brister ut i ”Därför vill jag falla på knä inför Fadern, efter vilket allt vad fader heter, i himlen och på jorden, har sitt namn.”Han som kallas Evig Fader är själva prototypen för den perfekta pappan, han är den första, och han är helt utan begränsningar eller brister.I Matt 10:29-31 står det: ”Säljs inte två sparvar för en kopparslant? Men ingen av dem faller till marken utan att er fader vet om det. Och på er är t o m hårstråna räknade. Var alltså inte rädda: ni är mer värda än aldrig så många sparvar.” Vår evige Fader ser på oss, på dig, med så mycket kärlek, ditt värde är oändligt i hans ögon, oavsett vad någon människa säger om dig. Ingen detalj i ditt liv är ointressant för honom.I Lukas kapitel 15 berättar Jesus liknelsen om Den förlorade sonen – vad berättar den berättelsen om Fadern? Jo, att Fadern, alltså Gud Fader är en älskande, väntande, förlåtande, saknande pappa, med famnen öppen för varje barn som kommer hem, alldeles oavsett vad som hänt under bortavaron och alldeles oavsett hur sonen i det här fallet behandlat sin far.Var barmhärtig så som er fader är barmhärtig. Luk 6:36Var fullkomliga så som er fader i himlen är fullkomlig. Matt 5:48I Ef 4:5-6 talar Paulus om enheten i kyrkan men kan inte låta bli att brista ut i hurdan Gud Fader är… En är Herren, en är tron, ett är dopet, en är Gud och allas Fader, han som står över allting, verkar genom allt och finns i allt.Er fader vet vad ni behöver redan innan ni har bett honom om det. Matt 6:8Vår evige Fader, förutom att han är evig, dvs pålitlig, bergfast, likadan, omöjlig att välta omkull, eller manipulera bort, eller förbruka, vår Fader står över allt, är fullkomlig, väntar, älskar, förlåter, vet vad vi behöver, är barmhärtig. Och ännu mer. Han är facit, själva prototypen för hur en förälder ska vara. 3: Ett hem hos GudEn av de vackraste tankar som har att göra med föräldrar, och då också vår evige Fader är att det är så nära sammankopplat med att få komma h...

Electric Spirit
Healing and Growth in Twin Flame Connections with VC Pitt

Electric Spirit

Play Episode Listen Later Oct 26, 2023 39:10


Today we welcome to the show author & healer V.C. Pitt. V.C. discusses twin flames and what she learned from her own experience meeting her twin flame. In this episode, we address the challenges that often arise in twin flame relationships. We discuss the intensity of the connection, the push-pull dynamics, and the common obstacles faced by twin flames. Our aim is to provide guidance, support, and practical advice for listeners who may be struggling in their own twin flame journey.If you have questions about twin flames, you can message V.C. or check out her book by clicking on the links below!V.C.'s Book: My Twin Flame Journeyhttps://www.amazon.com/Flame-Journey-Separation-Surrender-Release/dp/B0BB5MX47L/ref=tmm_pap_swatch_0?_encoding=UTF8&qid=1661082444&sr=8-8V.C.'s Website/Social Mediahttps://mytfjourney.com/You can find the host Jamie here:https://www.buymeacoffee.com/jamielynn12Bob Olson Best Psychic Directory:https://bestpsychicdirectory.com/california/Jamie-Lynn-l.htmlwww.electricspiritpodcast.com@electricspiritpodcasthttps://psychicjamie.com/@socalhealerElectric Spirit Podcast YouTube channel:https://youtube.com/@electricspiritpodcastJamie Lynn YouTube Channel (pick a card readings):https://youtube.com/@jamieintuitivereaderElectric Spirit Podcast Facebook Group:https://www.facebook.com/groups/661261524931303/?ref=share_group_linkDisclaimer:https://psychicjamie.com/jdisclaimerPlease note: The opinions stated by the guests are not always the opinions of Jamie Lynn's.By accessing this Podcast, I acknowledge that the entire contents are the property of Psychic Medium Jamie Lynn, or used by Psychic Medium Jamie Lynn, with permission, and are protected under U.S. and international copyright and trademark laws. Except as otherwise provided herein, users of this Podcast may save and use information contained in the Podcast only for personal or other non-commercial, educational purposes. No other use, including, without limitation, reproduction, retransmission or editing, of this Podcast may be made without the prior written permission of the Psychic Medium Jamie Lynn, which may be requested by contacting electricspiritpodcast@gmail.comhttps://www.buymeacoffee.com/jamielynn12#twinflames #trueLove #love #twinflame #twinflamejourneySupport the show

Adafruit Industries
EYE on NPI - Texas Instruments' TMUX821x Flat RON SPST 4-Channel Switches

Adafruit Industries

Play Episode Listen Later Sep 21, 2023 9:43


This week's EYE ON NPI is switching it up, with a look at some high-voltage-capable analog switches - Texas Instruments' TMUX821x Flat RON SPST 4-Channel Switches (https://www.digikey.com/en/product-highlight/t/texas-instruments/tmux821x-flat-ron-spst-4-channel-switches). A simple and effective way to switch and control up to 4 x 100V connections with up to 200mA each from any microcontroller or microcomputer. We carry dozens of different switches (https://www.adafruit.com/category/759), and DigiKey stocks easily 50K different switch configurations (https://www.digikey.com/en/products/result?s=N4IgTCBcDaIM4HcCWAXAxgCxAXQL5A0) from push-buttons (https://www.digikey.com/en/products/filter/pushbutton-switches/199) to toggles (https://www.digikey.com/en/products/filter/toggle-switches/201) but all of these require a person to push the button mechanically, whereas the TMUX series will connect and disconnect based on a separate digital signal, as low as 1.8V and as high as 48V. These are often used for switch audio or video, but are also often used in sensor measurement or test equipment. They're not good for power supply switching, and for digital signals there's often other ways of moving signals around, although they are sometimes used for the data lines of bidirectional digital signaling systems like USB. Like mechanical switches, the TI TMUX family of analog switches are 'bidirectional' (https://www.youtube.com/watch?v=z9GRiYPq7LM) - that means you can pass signal from A to B or from B to A. However, unlike mechanical switches there is no, well, mechanical connection. Instead, the switches are created by putting an N-FET and P-FET back-to-back. This means that there is no switch-bounce (https://en.wikipedia.org/wiki/Switch#Contact_bounce) or contact oxidation (https://en.wikipedia.org/wiki/Electrical_contact). Analog switches are pretty magical, and solve design problems that involve moving an analog signal around without having to hand-build a switch on board, but there are a few things to watch out for when 'modeling' how an analog switch varies from a mechanical one! First up, analog switches have fairly low 'Ron' resistance when the analog switch connection is made - on the order of a few ohms - and that is much higher than a mechanical switch. There is also 'very very high resistance, but not an open-circuit' when the analog switch connection is broken - on the order of a few hundred mega-ohms. (https://www.youtube.com/watch?v=n9EklrCrgH8) And don't forget you will need to have positive and negative power supplies beyond the voltages switched. So, if you are trying to switch 24Vpp signal, that ranges from -12V to +12V, you will need to supply them on the VDD and VSS lines. Also these are not electrically isolated, so add a separate opto/digital isolation (https://www.ti.com/isolation/digital-isolators/overview.html) circuitry if you want to keep your microcontroller fully disconnected from any high voltages. But compared to classic jellybean analog switches like the CD4066 ,(https://www.digikey.com/short/jw44n87t) the TI TMUX series of analog switches have improved circuit protections that will keep you from popping your chips (https://www.youtube.com/watch?v=RTPHjhjUl0E) by accident - especially since this series can be used with up to 100V. Check the datasheet for all details, but highlights include: built in pull-down resistors, protection against over/undervoltage as well as out-of-order voltage application, and latch-up immunity. If you're looking to switch up some analog signals on your next design, check out the Texas Instruments' TMUX821x 4-Channel Analog Switch (https://www.digikey.com/short/r3rhn270) family with 3 different configurations of NO/NC. And all are in stock for immediate shipment from DigiKey! Order tonight and by tomorrow morning you will be switchin' and swatchin' with these low Ron SPST analog switches.

Adafruit Industries
EYE on NPI: Texas Instruments DRV8411 Dual H-Bridge Motor Driver

Adafruit Industries

Play Episode Listen Later May 11, 2023 11:12


This week's EYE ON NPI will drive it's way into your heart and into your motorized design BOMs: it's the Texas Instruments DRV8411 Dual H-Bridge Motor Driver (https://www.digikey.com/en/product-highlight/t/texas-instruments/drv8411-dual-h-bridge-motor-driver), a nifty multi-purpose dual H-bridge driver for use with either two brushless DC motors or bi-polar stepper motor. This driver features a wide operating voltage, from 11V down to 1.65V, and up to 4A current output so it can be used in just about any motor control design. It's intended as an upgrade replacement to the popular DRV8833 (https://www.digikey.com/en/products/detail/texas-instruments/DRV8833PW/4251165), with pin-compatible options or with reduced BOM options if you're good with a little redesigning. Now you might be thinking: Hey, that DRV8833 (https://www.digikey.com/en/products/detail/texas-instruments/DRV8833PW/4251165) part number sounds so familiar - where have a I seen that before? Well, if you were thinking that you saw our Chip Shortage video clip from about 1 year ago (https://blog.adafruit.com/2022/05/26/chip-shortage-ti-drv8833-motor-driver-chipshortage-adafruit-adafruit-digikey-txinstruments/) we were desperately begging for some DRV8833's in PWP package so that we could get Crickit boards back in stock (https://www.adafruit.com/product/3093). We did get some eventually so that we have both our Crickit and DRV8833 breakout boards (https://www.digikey.com/en/products/detail/adafruit-industries-llc/3297/6419360) back in stock but now we're looking at maybe updating the design with this fancy upgrade. The original DRV8833 is a great chip, and can drive two DC motors or one stepper at 2.7-10.8V and peak current of 2A. To compare, the DRV8411 has a wider range of 1.65-11V which means its better at low voltage motors, say ones running off of 2 alkaline batteries. It's also available in 4A peak output transistor as the DRV8411A (https://www.digikey.com/en/products/detail/texas-instruments/DRV8411ARTER/18111300) - double the current! Note that if you are pushing that much current, at long intervals, through your driver you will have to think about heat-sinking (https://www.digikey.com/en/videos/c/cui/how-to-select-a-heat-sink). There's a section in the datasheet about how to use copper fill as a heat sink: 2 oz copper will do better than 1 oz and you'll want a large square area. Otherwise, you may have to look at adding an external heatsinking or forced cooling with a fan. Or, you may want to avoid getting into such a hot state by adding current limiting. These drivers can use a resistor that is in series with the motor power to limit how much current will sink: once the voltage across the resistor hits 200mV, the feedback system will reduce current draw. Our original breakout used these power/current-sense resistors to limit current to 1.2A by default. One nifty feature we saw in the DRV8411A version (https://www.digikey.com/short/5d917nh7) of this family is they've gotten rid of the 'in path' current sense resistors. While they worked great they needed to be high wattage in order to handle the full current from the motor path. The A changes this to a current mirror (https://en.wikipedia.org/wiki/Current_mirror) so that low wattage resistors, say 0402 or 0603 size, can be used instead saving a ton of space. You can also connect the monitor pads to your favorite microcontroller ADC to monitor current draw. And, oh yes, the DRV8411 (https://www.digikey.com/short/f8z23pm7) and DRV8411A (https://www.digikey.com/short/5d917nh7) are both in stock right now for instant shipping from Digi-Key! When you order from Digi-Key they will pack and ship your order from Thief River Falls within the day and you will get it as quickly as tomorrow morning so you can get your motors twisting and turning with this fabulous NPI.

The Space Industry
Powering the latest trends of space electronics - with Texas Instruments

The Space Industry

Play Episode Listen Later Apr 13, 2023 41:33


Episode 49 is a conversation with Adrian Helwig, Analog Field Application Engineer, and Michael Seidl, Systems Engineer from Texas Instruments, about the trends in space electronics.Texas Instruments is a global semiconductor manufacturing company with expertise in analog and embedded processing chips. The company was founded in 1930 and headquartered in Dallas, Texas. In this episode, we discuss: While power is a very precious good in space satellite applications continue to become even more power-hungry in the future: More intelligence/processing power for telecom and data routing applications AI for pre-processing on-board on optical and radar imaging payload to reduce data rates even though resolution goes up   Electrically steered antennas replace classic mechanical antenna pointing system, RF to bits (RF sampling) Small satellites autonomous maneuvering for debris avoidance, etc. Designers must increase total power capabilities / power density and bring efficiency up. Efficiency is very important as any improvement will bring a double benefit: power that is no longer wasted does not have to be produced anymore. Reduced power losses save efforts in cooling. With higher efficiency, there is also greater power density possible. TI's products enable such higher power density to also enable savings in the board area. The high quality of the voltage rails is increasingly challenging to meet: e.g. Only 0.8V core voltages with tens of Amperes but +/-3% tolerance leaves only mV intolerance; Power distribution network requires a high amount of capacitance which adds cost and board area. highly precise instruments and very high-throughput communication systems require super-low noise levels on the supply voltage.  The power tree is fundamentally important for the overall robustness and availability of the satellite. TI provides a high level of radiation hardness (especially against heavy ion impacts which are challenging for power devices) combined with several protection solutions – integrated into the actual power devices but also as discrete functions to complement the actual power supply solution. Tight control of the voltage rails is very important to assure the reliability of the system. For e.g. a 10% transient applied to a downstream device can easily damage it or degrade its longevity. With -SEP and QMLP/QMLV the right level of cost & rad hardness. Fault Detection, Isolation & Recovery Full portfolio and strong roadmap, including eFuses, all to power density, protection, integration  Strong design support capabilities; Stability analysis, pricing, and availability via web store; PMP designs; EVMs; TIDAs… All radiation reports, quality data, materials, etc. are available online. You can find out more about Texas Instruments here on their satsearch supplier hub.And if you would like to learn more about the space industry and our work at satsearch building the global marketplace for space, please join our newsletter.[Music from Uppbeat (free for Creators!): https://uppbeat.io/t/all-good-folks/when-we-get-there License code: Y4KZEAESHXDHNYRA] 

DEUS AMA EM VOCÊ!
É preciso passar pela provação!

DEUS AMA EM VOCÊ!

Play Episode Listen Later Feb 21, 2023 2:40


Primeira Leitura: Eclesiástico 2,1-13 Leitura do livro do Eclesiástico – 1Filho, se decidires servir o Senhor, permanece na justiça e no temor e prepara a tua alma para a provação. 2Mantém o teu coração firme e sê constante, inclina teu ouvido e acolhe as palavras de inteligência, e não te assustes no momento da contrariedade. 3Suporta as demoras de Deus, agarra-te a ele e não o deixes, para que sejas sábio em teus caminhos. 4Tudo o que te acontecer, aceita-o, e sê constante na dor; e, nas contrariedades de tua pobre condição, sê paciente. 5Pois é no fogo que o ouro e a prata são provados e, no cadinho da humilhação, os homens agradáveis a Deus. 6Crê em Deus, e ele cuidará de ti; endireita os teus caminhos e espera nele. Conserva o seu temor, e nele envelhecerás. 7Vós que temeis o Senhor, contai com a sua misericórdia e não vos desvieis, para não cair. 8Vós, que temeis o Senhor, confiai nele, e a recompensa não vos faltará. 9Vós, que temeis o Senhor, esperai coisas boas: alegria duradoura e misericórdia. 10Vós, que temeis o Senhor, amai-o, e vossos corações ficarão iluminados. 11Considerai, filhos, as gerações passadas e vede: quem confiou no Senhor e ficou desiludido? 12Quem permaneceu nos seus mandamentos e foi abandonado? Quem o invocou e foi por ele desprezado? 13Pois o Senhor é compassivo e misericordioso, perdoa os pecados no tempo da tribulação e protege a todos os que o procuram com sinceridade. – Palavra do Senhor. Salmo Responsorial: 36(37) Entrega teu caminho ao Senhor, e o mais ele fará. 1. Confia no Senhor e faze o bem, / e sobre a terra habitarás em segurança. / Coloca no Senhor tua alegria, / e ele dará o que pedir teu coração. – R. 2. O Senhor cuida da vida dos honestos, / e sua herança permanece eternamente. / Não serão envergonhados nos maus dias, / mas, nos tempos de penúria, saciados. – R. 3. Afasta-te do mal e faze o bem, / e terás tua morada para sempre. / Porque o Senhor Deus ama a justiça / e jamais ele abandona os seus amigos. / Os malfeitores hão de ser exterminados, / e a descendência dos malvados destruída. – R. 4. A salvação dos piedosos vem de Deus; / ele os protege nos momentos de aflição. / O Senhor lhes dá ajuda e os liberta, † defende-os e protege-os contra os ímpios, / e os guarda porque nele confiaram. – R. Evangelho: Marcos 9,30-37 Aleluia, aleluia, aleluia. Minha glória é a cruz do Senhor Cristo Jesus, / pela qual o mundo está crucificado para mim e eu para este mundo (Gl 6,14). – R. Proclamação do Evangelho de Jesus Cristo segundo Marcos – Naquele tempo, 30Jesus e seus discípulos atravessavam a Galileia. Ele não queria que ninguém soubesse disso, 31pois estava ensinando a seus discípulos. E dizia-lhes: “O Filho do Homem vai ser entregue nas mãos dos homens, e eles o matarão. Mas, três dias após sua morte, ele ressuscitará”. 32Os discípulos, porém, não compreendiam essas palavras e tinham medo de perguntar. 33Eles chegaram a Cafarnaum. Estando em casa, Jesus perguntou-lhes: “O que discutíeis pelo caminho?” 34Eles, porém, ficaram calados, pois pelo caminho tinham discutido quem era o maior. 35Jesus sentou-se, chamou os doze e lhes disse: “Se alguém quiser ser o primeiro, que seja o último de todos e aquele que serve a todos!” 36Em seguida, pegou uma criança, colocou-a no meio deles e, abraçando-a, disse: 37“Quem acolher em meu nome uma destas crianças é a mim que estará acolhendo. E quem me acolher está acolhendo não a mim, mas àquele que me enviou”. – Palavra da salvação.

DEUS AMA EM VOCÊ!
Experimentar Deus que é sabedoria e amor!

DEUS AMA EM VOCÊ!

Play Episode Listen Later Feb 20, 2023 2:32


Primeira Leitura: Eclesiástico 2,1-13 Leitura do livro do Eclesiástico – 1Filho, se decidires servir o Senhor, permanece na justiça e no temor e prepara a tua alma para a provação. 2Mantém o teu coração firme e sê constante, inclina teu ouvido e acolhe as palavras de inteligência, e não te assustes no momento da contrariedade. 3Suporta as demoras de Deus, agarra-te a ele e não o deixes, para que sejas sábio em teus caminhos. 4Tudo o que te acontecer, aceita-o, e sê constante na dor; e, nas contrariedades de tua pobre condição, sê paciente. 5Pois é no fogo que o ouro e a prata são provados e, no cadinho da humilhação, os homens agradáveis a Deus. 6Crê em Deus, e ele cuidará de ti; endireita os teus caminhos e espera nele. Conserva o seu temor, e nele envelhecerás. 7Vós que temeis o Senhor, contai com a sua misericórdia e não vos desvieis, para não cair. 8Vós, que temeis o Senhor, confiai nele, e a recompensa não vos faltará. 9Vós, que temeis o Senhor, esperai coisas boas: alegria duradoura e misericórdia. 10Vós, que temeis o Senhor, amai-o, e vossos corações ficarão iluminados. 11Considerai, filhos, as gerações passadas e vede: quem confiou no Senhor e ficou desiludido? 12Quem permaneceu nos seus mandamentos e foi abandonado? Quem o invocou e foi por ele desprezado? 13Pois o Senhor é compassivo e misericordioso, perdoa os pecados no tempo da tribulação e protege a todos os que o procuram com sinceridade. – Palavra do Senhor. Salmo Responsorial: 36(37) Entrega teu caminho ao Senhor, e o mais ele fará. 1. Confia no Senhor e faze o bem, / e sobre a terra habitarás em segurança. / Coloca no Senhor tua alegria, / e ele dará o que pedir teu coração. – R. 2. O Senhor cuida da vida dos honestos, / e sua herança permanece eternamente. / Não serão envergonhados nos maus dias, / mas, nos tempos de penúria, saciados. – R. 3. Afasta-te do mal e faze o bem, / e terás tua morada para sempre. / Porque o Senhor Deus ama a justiça / e jamais ele abandona os seus amigos. / Os malfeitores hão de ser exterminados, / e a descendência dos malvados destruída. – R. 4. A salvação dos piedosos vem de Deus; / ele os protege nos momentos de aflição. / O Senhor lhes dá ajuda e os liberta, † defende-os e protege-os contra os ímpios, / e os guarda porque nele confiaram. – R. Evangelho: Marcos 9,30-37 Aleluia, aleluia, aleluia. Minha glória é a cruz do Senhor Cristo Jesus, / pela qual o mundo está crucificado para mim e eu para este mundo (Gl 6,14). – R. Proclamação do Evangelho de Jesus Cristo segundo Marcos – Naquele tempo, 30Jesus e seus discípulos atravessavam a Galileia. Ele não queria que ninguém soubesse disso, 31pois estava ensinando a seus discípulos. E dizia-lhes: “O Filho do Homem vai ser entregue nas mãos dos homens, e eles o matarão. Mas, três dias após sua morte, ele ressuscitará”. 32Os discípulos, porém, não compreendiam essas palavras e tinham medo de perguntar. 33Eles chegaram a Cafarnaum. Estando em casa, Jesus perguntou-lhes: “O que discutíeis pelo caminho?” 34Eles, porém, ficaram calados, pois pelo caminho tinham discutido quem era o maior. 35Jesus sentou-se, chamou os doze e lhes disse: “Se alguém quiser ser o primeiro, que seja o último de todos e aquele que serve a todos!” 36Em seguida, pegou uma criança, colocou-a no meio deles e, abraçando-a, disse: 37“Quem acolher em meu nome uma destas crianças é a mim que estará acolhendo. E quem me acolher está acolhendo não a mim, mas àquele que me enviou”. – Palavra da salvação.

DEUS AMA EM VOCÊ!
Imagem e Semelhança!

DEUS AMA EM VOCÊ!

Play Episode Listen Later Feb 7, 2023 3:27


Evangelho: Marcos 7,1-13 Aleluia, aleluia, aleluia. Inclinai meu coração às vossas advertências / e dai-me a vossa lei como um presente valioso! (Sl 118,36.29) – R. Proclamação do Evangelho de Jesus Cristo segundo Marcos – Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos'. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: ‘Honra teu pai e tua mãe'. E ainda: ‘Quem amaldiçoa o pai ou a mãe, deve morrer'. 11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: ‘O sustento que vós poderíeis receber de mim é Corban, isto é, consagrado a Deus'. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a Palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”. – Palavra da salvação.

Palavra do Dia
Palavra do dia - Mc 7,1-13 - 07/02/23

Palavra do Dia

Play Episode Listen Later Feb 7, 2023 5:22


Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos'. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus, a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: ‘Honra teu pai e tua mãe'. E ainda: ‘Quem amaldiçoa o pai ou a mãe deve morrer'. 11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: ‘O sustento que vós poderíeis receber de mim é Corban, isto é, Consagrado a Deus'. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a Palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”.

The Mint Condition: NFT and Digital Collectibles Entertainment

Today on TMC:#y00ts staking live#UniSwap NFT platform + AIRDROPSPhantom wallet to support Ethereum and PolygonBlockfi files for bankruptcy#BAYC Trial of Jimmy the Monkey to begin (What is coming for Christmas?Powered by @dGenNetworkWebsite: https://dgen.network/Follow us on Twitter:dGEN Network: https://twitter.com/dGenNetworkTMC Twitter: https://twitter.com/TheMintCond​​​​Follow dGEN on all of our Social Media:Discord: https://discord.gg/8vbVZ8vDhrTikTok: https://www.tiktok.com/@dgennetwork?_t=8V..FB: https://www.facebook.com/DecentralizedGenerationNetwork/Support the show

The Mint Condition: NFT and Digital Collectibles Entertainment

Today on TMC:Rally Rd. Co-Founder and Chief Product Officer, Rob Petrozzo joins us to discuss Rally's upcoming drop.  #Rally x Pixel Hall of Fame: The Future is HistoryRally is a platform for buying and selling equity shares in collectible assets. Their offerings include a triceratops skull, a broadside of The Declaration of Independence, as well as classic cars, rare comics, and #NFTs.Rally Website: https://rallyrd.com/#section1The Future is History Website: https://thefutureishistory.com/Rally's Twitter:  https://twitter.com/OnRallyRd?s=20&t=pdYCATh1bhUWAZTsevDQDwRob's Twitter:  https://twitter.com/robpetrozzo?s=20&t=pdYCATh1bhUWAZTsevDQDw Powered by @dGenNetworkWebsite: https://dgen.network/Follow us on Twitter:dGEN Network: https://twitter.com/dGenNetworkTMC Twitter: https://twitter.com/TheMintCond​​​​Follow dGEN on all of our Social Media:Discord: https://discord.gg/8vbVZ8vDhrTikTok: https://www.tiktok.com/@dgennetwork?_t=8V..FB: https://www.facebook.com/DecentralizedGenerationNetwork/Support the show

Coffee with Captain: Daily NFT Conversations
Tom Brady Has Been Invited to This Show

Coffee with Captain: Daily NFT Conversations

Play Episode Listen Later Nov 18, 2022 44:29


- julzy's nft London recap - ftx (Tom Brady invite)- World Cup predictions- adidas capsules (edited)Powered by @dGenNetworkWebsite: https://dgen.network/Follow us on Twitter:dGEN Network: https://twitter.com/dGenNetworkB-Love & Julzy Twitter: https://twitter.com/blovejulzyshowFollow dGEN on all of our Social Media:Discord: https://discord.gg/8vbVZ8vDhrTikTok: https://tiktok.com/@dgennetwork?_t=8V...FB: https://www.facebook.com/Decentralize...Support the show

Coffee with Captain: Daily NFT Conversations
Chatting with T-Shirt Bob about “A Common Place"

Coffee with Captain: Daily NFT Conversations

Play Episode Listen Later Nov 11, 2022 55:39


Today on The B-Love and Julzy show:- launching during a bear - cc0- history of artPowered by @dGenNetworkWebsite: https://dgen.network/Follow us on Twitter:dGEN Network: https://twitter.com/dGenNetworkB-Love & Julzy Twitter: https://twitter.com/blovejulzyshowFollow dGEN on all of our Social Media:Discord: https://discord.gg/8vbVZ8vDhrTikTok: https://www.tiktok.com/@dgennetwork?_t=8V.FB: https://www.facebook.com/DecentralizedGenerationNetwork/Support the show

Coffee with Captain: Daily NFT Conversations
How We Minted Art Gobblers!!

Coffee with Captain: Daily NFT Conversations

Play Episode Listen Later Nov 2, 2022 29:31


Join us for an honest discussion of how we ended up #minting  #ArtGobblers , and our thoughts on the project.How did we get in?How did the marketing/WL strategy workHow to fight #fomo and stay in the gameLet's set the record straight.Powered by @dGenNetworkWebsite: https://dgen.network/Follow us on Twitter:dGEN Network: https://twitter.com/dGenNetworkB-Love & Julzy Twitter: https://twitter.com/blovejulzyshowFollow dGEN on all of our Social Media:Discord: https://discord.gg/8vbVZ8vDhrTikTok: https://tiktok.com/@dgennetwork?_t=8V...FB: https://www.facebook.com/Decentralize...Support the show

The Mint Condition: NFT and Digital Collectibles Entertainment
NFT and Crypto Security with Ledger Enterprise

The Mint Condition: NFT and Digital Collectibles Entertainment

Play Episode Listen Later Oct 26, 2022 66:24


About Ledger Enterprise:Ledger Enterprise is the leading provider of technology solutions that empower organizations to participate in the digital value ecosystem securely and at scale. While creating massive opportunities, Web3 at scale presents compounded security, regulatory and operational challenges. Ledger Enterprise provides end-to-end hardware, firmware and software solutions together with industry expertise and support, to empower our clients to unlock these distributed networks opportunities. We are the B2B division of Ledger, a global leader in digital assets security, protecting 15% of global crypto value. The Ledger Enterprise Platform provides secure access to top distributed networks, offering secure governance to help scale treasury, DeFi, NFT and Token management capabilities for more than 70 innovative customers around the world.Learn more on https://enterprise.ledger.com/BIO:Joel Edgerton is Head of Americas - Enterprise at Ledger where he is responsible for overseeing clients' strategic growth in the United States, Canada, and Latin America.He is also a member of the Board of Directors of bitFlyer, the largest Japanese crypto exchange, where he was head of the US. He has over 20 years of experience in traditional finance and insurance through IBM, State Street, Citigroup, Legg Mason, and BNP Paribas.Powered by @dGenNetworkSponsored by @DraftKingsWebsite: https://dgen.network/Follow us on Twitter:dGEN Network: https://twitter.com/dGenNetworkTMC Twitter: https://twitter.com/TheMintCond​​​​Follow dGEN on all of our Social Media:Discord: https://discord.gg/8vbVZ8vDhrTikTok: https://tiktok.com/@dgennetwork?_t=8V...FB: https://www.facebook.com/DecentralizedGenerationNetwork/Support the show

Coffee with Captain: Daily NFT Conversations
Is it time to sell all your NFTs?

Coffee with Captain: Daily NFT Conversations

Play Episode Listen Later Oct 21, 2022 52:49


- timing the bear market - #sandbox experience - scamming the #scammers part 2Powered by @dGenNetworkSponsored by @DraftKingsWebsite: https://dgen.network/Follow us on Twitter:dGEN Network: https://twitter.com/dGenNetworkB-Love & Julzy Twitter: https://twitter.com/blovejulzyshowFollow dGEN on all of our Social Media:Discord: https://discord.gg/8vbVZ8vDhrTikTok: https://tiktok.com/@dgennetwork?_t=8V...FB: https://www.facebook.com/DecentralizedGenerationNetwork/Support the show

Coffee with Captain: Daily NFT Conversations
Creative pioneers Vinnie Hager and Toby Lasso

Coffee with Captain: Daily NFT Conversations

Play Episode Listen Later Sep 23, 2022 55:18


On today's show: Interviewing creative pioneers Vinnie Hager and Toby Lasso- Exploring creative #NFT processes - What projects are gonna make it- #Community, Community, Community - Confidence in your craft- Discussing Letters and #WeatheReportNFTPowered by @dGenNetworkSponsored by @DraftKingsWebsite: https://dgen.network/Follow us on Twitter:dGEN Network: https://twitter.com/dGenNetworkB-Love & Julzy Twitter: https://twitter.com/blovejulzyshowFollow dGEN on all of our Social Media:Discord: https://discord.gg/8vbVZ8vDhrTikTok: https://tiktok.com/@dgennetwork?_t=8V...FB: https://facebook.com/DecentralizedGen...Support the show

DEUS AMA EM VOCÊ!
Gerando Cristo em nossas vidas

DEUS AMA EM VOCÊ!

Play Episode Listen Later Sep 3, 2022 2:50


Primeira Leitura: 1 Coríntios 4,6-15 Leitura da primeira carta de São Paulo aos Coríntios – 6Irmãos, apliquei essa doutrina a mim e a Apolo por causa de vós, para que o nosso exemplo vos ensine a não vos inchar de orgulho, tomando o partido de um contra outro, e a “não ir além daquilo que está escrito”. 7Com efeito, quem é que te faz melhor que os outros? O que tens que não tenhas recebido? Mas, se recebeste tudo que tens, por que, então, te glorias, como se não o tivesses recebido? 8Vós já estais saciados! Já vos enriquecestes! Sem nós, já começastes a reinar! Oxalá estivésseis mesmo reinando, para nós também reinarmos convosco! 9Na verdade, parece-me que Deus nos apresentou, a nós, apóstolos, em último lugar, como pessoas condenadas à morte. Tornamo-nos um espetáculo para o mundo, para os anjos e os homens. 10Nós somos os tolos por causa de Cristo; vós, porém, os sábios nas coisas de Cristo. Nós somos os fracos; vós, os fortes. Vós sois tratados com toda a estima e atenção, e nós, com todo o desprezo. 11Até a presente hora, padecemos fome, sede e nudez; somos esbofeteados e vivemos errantes; 12fadigamo-nos, trabalhando com as nossas mãos; somos injuriados, e abençoamos; somos perseguidos, e suportamos; 13somos caluniados, e exortamos. Tornamo-nos como que o lixo do mundo, a escória do universo, até o presente. 14Escrevo-vos tudo isso não com a intenção de vos envergonhar, mas para vos admoestar como meus filhos queridos. 15De fato, mesmo que tivésseis dez mil educadores na vida em Cristo, não tendes muitos pais. Pois fui eu que, pelo anúncio do Evangelho, vos gerei em Jesus Cristo. – Palavra do Senhor. Salmo Responsorial: 144(145) O Senhor está perto de quem o invoca! 1. É justo o Senhor em seus caminhos, / é santo em toda obra que ele faz. / Ele está perto da pessoa que o invoca, / de todo aquele que o invoca lealmente. – R. 2. O Senhor cumpre os desejos dos que o temem, / ele escuta os seus clamores e os salva. / O Senhor guarda todo aquele que o ama, / mas dispersa e extermina os que são ímpios. – R. 3. Que a minha boca cante a glória do Senhor † e que bendiga todo ser seu nome santo / desde agora, para sempre e pelos séculos. – R. Evangelho: Lucas 6,1-5 Aleluia, aleluia, aleluia. Sou o caminho, a verdade e a vida: / ninguém vem ao Pai, senão por mim (Jo 14,6). – R. Proclamação do Evangelho de Jesus Cristo segundo Lucas – 1Num sábado, Jesus estava passando através de plantações de trigo. Seus discípulos arrancavam e comiam as espigas, debulhando-as com as mãos. 2Então alguns fariseus disseram: “Por que fazeis o que não é permitido em dia de sábado?” 3Jesus respondeu-lhes: “Acaso vós não lestes o que Davi e seus companheiros fizeram quando estavam sentindo fome? 4Davi entrou na casa de Deus, pegou dos pães oferecidos a Deus e os comeu, e ainda por cima os deu a seus companheiros. No entanto, só os sacerdotes podem comer desses pães”. 5E Jesus acrescentou: “O Filho do Homem é senhor também do sábado”. – Palavra da salvação.

Adafruit Industries
EYE on NPI - AVR DD Family of Microcontrollers

Adafruit Industries

Play Episode Listen Later Aug 25, 2022 12:10


This week's EYE ON NPI is a throwback to the 8-bit era, with a new spin on the classic AVR microcontrollers we've loved for decades: it's Microchip's AVR® DD Family of Microcontrollers (https://www.digikey.com/en/product-highlight/m/microchip-technology/avr-dd-family-of-microcontrollers), a powerful update to the powerful and low-power AVR RISC core that came from Atmel. While many folks may be moving to Cortex M0 or RISC-V chipsets to get 32-bit performance, there's still a lot of demand and use for 8-bit microcontrollers. Cost, simplicity, reliability, code-size, and power usage can all be better on 8-bit. If you're only on a 32-bit micro because of peripherals that tend to come with the fancier chips, you might be surprised by what the AVR DD family has to offer. For example, these chips have external interrupts on (just about all) the GPIO pins. There's four 16-bit timers plus one 12-bit (that's *five* total timers!), SPI & I2C, two UARTs, a 10-bit DAC, and 12-bit input ADC that's muxed to almost every pin. In particular, the high-bit ADC and DAC are a little unusual to see in an 8-bit platform. (https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/AVR32-16DD20-14-Prel-DataSheet-DS40002413.pdf) There's also some funky MCP-specific peripherals that can help reduce BOM cost. For example, CCL/LUT is a peripheral that allows you to make custom logic-lookup-tables for making simple - but very very fast - multi-input logic gates that can use interrupts or peripherals as input. (http://ww1.microchip.com/downloads/en/AppNotes/TB3218-Getting-Started-with-CCL-90003218A.pdf) For example, you can make a SR latch, logic gate, or Manchester encoder - you can think of it as like a 'micro' PIO or CPLD. MVIO is a new capability that we haven't seen before, where an IO port can run at a different logic level - either higher or lower than the VCC power. This allows easy bi-directional interfacing of SPI/I2C/GPIO to 3V logic from 5V, or vice versa, without the use of level shifting! (http://ww1.microchip.com/downloads/en/Appnotes/GettingStarted-MVIO-AVRDB-DS90003287A.pdf) Perfect if you want to run this main core at 5V for speed and signal strength, but have some 3V sensors to interface to, or run the core at 1.8V for power and IO but have a 3.4V LED you want to light up. Clock rate is up to 24 MHz, can be powered from 1.8 to 5.5V - it's exceedingly rare to find 5V ARM chips - and have FLASH, SRAM, EEPROM and NVM. EEPROM in particular is not common on ARM chips, and some don't even have built in Flash. So think of this as a compact li'l chip with pretty much everything you need to get a product out the door, with a range of memory sizes and physical packages from QFN to DIP! (http://ww1.microchip.com/downloads/en/DeviceDoc/AVR-DD-Product-Brief-DS40002215A.pdf) It's nice to see Microchip is still innovating the AVR line, to make better 8-bit micros that power the electronics around us. For programming, of course you can use MPLAB IDE but we like Arduino compatibility and SpenceKonde's DxCore (https://github.com/SpenceKonde/DxCore) looks like it's adding or added AVR DD support, so you can quickly get going with compiling code and using the basic peripherals in just a few minutes! Best of all, the AVR DD family of parts (https://www.digikey.com/short/m4qb8wf8) are totally in stock at Digi-Key right now for immediate shipment. There's SOIC, SSOP and QFN packages with up to 64KB flash / 8 KB RAM, all for about $1.50 in individuals, $1 in qty. If you're looking for an alternative to the ATmega328, this is a nice step up. We recommend getting started with the AVR DD Curiosity Nano board which is breadboard compatible and has everything needed to get started. (https://www.digikey.com/short/10n70tmc) Order today and you can be MVIOing towards your next AVR 8-bit based product by tomorrow afternoon!

Adafruit Industries
EYE on NPI - ams OSRAM AS7343 Spectral Sensor

Adafruit Industries

Play Episode Listen Later Aug 11, 2022 9:02


This week's EYE ON NPI is making the rainbow connection - it's the ams OSRAM AS7343 Spectral Sensor (https://www.digikey.com/en/product-highlight/a/ams/as7343-spectral-sensor). This is a great update to the AS7341 11-channel sensor (https://www.digikey.com/short/p4vv8b5w) we released a STEMMA QT breakout (https://www.digikey.com/short/n8bv0j9w) for a few years ago. ams OSRAM's AS7343 is a 14-channel, highly versatile, multi-purpose spectral sensor that enables consumer, commercial, industrial, and laboratory applications. It is optimized for reflective, transmissive, and emissive measurements including color matching, fluid or reagent analysis, or general spectral reconstruction. The spectral response is defined by individual channels covering approximately 380 nm to 1,000 nm with 12+2 channels: 12 in the visible spectrum (VIS) to near-infrared (NIR) range, a clear channel, and a flicker channel. The AS7343 is an interesting bird - most light sensors only support RGB and maybe IR / Clear diodes. That means you can often get a fairly good 'human eye spectral response' (https://en.wikipedia.org/wiki/Spectral_sensitivity) of the color that is being detected. However, the sensors cannot determine whether they are seeing something that is truly 'orange wavelength' (https://en.wikipedia.org/wiki/Spectral_color) or if it's a mix of RGB that just looks orange. This doesn't matter too much for if you're trying to detect the color of a Skittle (https://techcrunch.com/2017/02/06/this-candy-sorting-machine-isnt-the-hero-the-world-wants-but-its-the-hero-the-world-needs/) but if you're trying to determine the spectral radiation of a material (https://publiclab.org/notes/homechemist/08-24-2018/diy-high-resolution-spectrometer) - you really want to be able to detect the actual wavelengths. The AS7343 is a remarkably inexpensive sensor for being able to detect 14 channels: 12 wavelengths plus a clear and flicker output channel. That's also 4 more wavelengths than the AS7341! Great for scientific experimentation, LED color calibration, miniature optical spectrometers, etc. Interfacing is pretty simple: you just need I2C and a 1.8V power supply. It even looks like it's pin-compatible with the AS7341 so you could probably use our open source breakout board files (https://github.com/adafruit/Adafruit-AS7341-PCB) and our Arduino/C (https://github.com/adafruit/Adafruit_AS7341) or Python (https://github.com/adafruit/Adafruit_CircuitPython_AS7341) libraries to jump-start your design. Best of all, the ams OSRAM AS7343 Spectral Sensor (https://www.digikey.com/short/qw708dhm) is available and in stock at Digi-Key right now for immediate shipment. Order today and you can be sensing the rainbow by tomorrow afternoon. See ams YouTube videos https://www.youtube.com/watch?v=dylVmxE9Tzg&list=PLhZuLuU8MQ21LfAdzdyeVAQyfijClgZR7&index=5

ITP's Podcast
For the circuit shown in the figure(figure 1) find the current through each resistor

ITP's Podcast

Play Episode Listen Later Apr 4, 2022 5:38


This podcast will provide additional information about: "For the circuit shown in the figure(figure 1) find the current through each resistor". We must not forget about the content!Questions: Find the current through each resistor for the circuit in Figure 1.(A). Find the current through each resistor for the circuit in Figure 1.Use two important figures to express your answers. Your answers should be separated numerically by commas.(B). Find the potential difference between each resistor and the circuit in the figure.Two significant figures are sufficient to express your answers. Your answers should be separated numerically by commas.Answera) Req= 6ohmSo net current =24/6 =4 ASoCurrent through 2 Ohm = 4A (ans).Current through 4 Ohm = 2A (ans).Current through 6 Ohm = 4/3A =1.33A (ans)Current through 12 Ohm = 2/3A =0.67 An (ans)Current through 8 Ohm = 2 A (ans).b)Voltage through 2 Ohm = 4A *2 =8V (ans)Voltage through 4 Ohm = 2A*4 =8V (ans)Voltage through 6 Ohm = 6*4/3 =8V (ans)Voltage through 12 ohm =2/3A*12 =8V (ans)Voltage through 8 ohm =2A*8 =16V (ans)Series and parallel combination of resistors:Resistors can be connected in parallel or series to make an electric circuit. Although the current can pass through all resistors in a series combination, the potential difference between them will be different. This is the equivalent resistance to resistors connected in series.R eq =R 1 +R 2 +R 3 (where; R1,R2, R3....... The resistance of individual resistorsA parallel combination of resistors is when the potential difference across each resistor stays the same but the current flowing through each resistor changes. Find the equivalent resistance for parallel combinations by:The Equivalent resistance method is useful for simplifying circuits that have multiple voltage sources or one branch with several series-parallel resistors. It can also be used to create a single voltage source and an equivalent resistance.The equivalent resistance is the resistance that can be connected to the voltage source separately, and provides the same source current as in the original circuit.The Method of Equivalent Resistance, which is an extension of Ohm's Law and used to calculate the source current in the simplified Circuit, is called the Method of Equivalent Resistance.Last wordsBelow is the solution to "Find the current through each resistor in the circuit as shown in Figure 1" . Please leave a comment if you have any comments or good solutions. For More information: https://ittutoria.net/

Padre Beto Badiani
"Seu coração está longe de mim." (Marcos 7,1-13) - 08/02/2022

Padre Beto Badiani

Play Episode Listen Later Feb 8, 2022 7:31


Proclamação do Evangelho de Jesus Cristo segundo Marcos – Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos'. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: ‘Honra teu pai e tua mãe'. E ainda: ‘Quem amaldiçoa o pai ou a mãe deve morrer'. 11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: ‘O sustento que vós poderíeis receber de mim é Corban, isto é, consagrado a Deus'. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”. – Palavra da salvação.

DEUS AMA EM VOCÊ!
SER TEMPLO!

DEUS AMA EM VOCÊ!

Play Episode Listen Later Feb 8, 2022 2:51


Primeira Leitura: 1 Reis 8,22-23.27-30 Leitura do primeiro livro dos Reis – Naqueles dias, 22Salomão pôs-se de pé diante do altar do Senhor, na presença de toda a assembleia de Israel, estendeu as mãos para o céu e disse: 23“Ó Senhor, Deus de Israel, não há Deus igual a ti nem no mais alto dos céus nem aqui embaixo na terra; tu és fiel à tua misericordiosa aliança com teus servos, que andam na tua presença de todo o seu coração. 27Mas será que Deus pode realmente morar sobre a terra? Se os mais altos céus não te podem conter, muito menos esta casa que eu construí! 28Mas atende, Senhor meu Deus, à oração e à súplica do teu servo e ouve o clamor e a prece que ele faz hoje em tua presença. 29Teus olhos estejam abertos noite e dia sobre esta casa, sobre o lugar do qual disseste: ‘Aqui estará o meu nome!' Ouve a oração que o teu servo te faz neste lugar. 30Ouve as súplicas de teu servo e de teu povo Israel, quando aqui orarem. Escuta-os do alto da tua morada, no céu, escuta-os e perdoa!” – Palavra do Senhor. Salmo Responsorial: 83(84) Quão amável, ó Senhor, é vossa casa! 1. Minha alma desfalece de saudades / e anseia pelos átrios do Senhor! / Meu coração e minha carne rejubilam / e exultam de alegria no Deus vivo! – R. 2. Mesmo o pardal encontra abrigo em vossa casa, † e a andorinha ali prepara o seu ninho, / para nele seus filhotes colocar: / vossos altares, ó Senhor Deus do universo! / Vossos altares, ó meu rei e meu Senhor! – R. 3. Felizes os que habitam vossa casa; / para sempre haverão de vos louvar! / Olhai, ó Deus, que sois a nossa proteção, / vede a face do eleito, vosso ungido! – R. 4. Na verdade, um só dia em vosso templo / vale mais do que milhares fora dele! / Prefiro estar no limiar de vossa casa / a hospedar-me na mansão dos pecadores! – R. Evangelho: Marcos 7,1-13 Aleluia, aleluia, aleluia. Inclinai meu coração às vossas advertências / e dai-me a vossa lei como um presente valioso! (Sl 118,36.29) – R. Proclamação do Evangelho de Jesus Cristo segundo Marcos – Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos'. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: ‘Honra teu pai e tua mãe'. E ainda: ‘Quem amaldiçoa o pai ou a mãe deve morrer'. 11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: ‘O sustento que vós poderíeis receber de mim é Corban, isto é, consagrado a Deus'. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”. – Palavra da salvação.

Liturgia Diária
"Este povo me honra com os lábios, as seu coração está longe de mim." Mc 7,1-13 - Santa Bakhita,rpn.

Liturgia Diária

Play Episode Listen Later Feb 8, 2022 5:32


08FEV2022 COR LITÚRGICA: VERDE 5ª Semana Comum | Terça-feira Evangelho (Mc 7,1-13) — O Senhor esteja convosco. — Ele está no meio de nós. — Proclamação do Evangelho de Jesus Cristo + segundo Marcos. — Glória a vós, Senhor. Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos'. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus, a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: ‘Honra teu pai e tua mãe'. E ainda: ‘Quem amaldiçoa o pai ou a mãe deve morrer'. 11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: ‘O sustento que vós poderíeis receber de mim é Corban, isto é, Consagrado a Deus'. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a Palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”. — Palavra da Salvação. — Glória a vós, Senhor. --- Send in a voice message: https://anchor.fm/pe-jose-vicente/message

Palavra do Dia
Palavra do dia - Mc 7,1-13 - 08/02/22

Palavra do Dia

Play Episode Listen Later Feb 8, 2022 5:05


Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos'. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus, a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: ‘Honra teu pai e tua mãe'. E ainda: ‘Quem amaldiçoa o pai ou a mãe deve morrer'. 11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: ‘O sustento que vós poderíeis receber de mim é Corban, isto é, Consagrado a Deus'. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a Palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”.

Homilias PNSConceição RB
Padre Tonny | Domingo, 29 de Agosto de 2021

Homilias PNSConceição RB

Play Episode Listen Later Aug 30, 2021 15:37


22º Domingo do Tempo Comum Anúncio do Evangelho (Mc 7,1-8.14-15.21-23) Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos'. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 14Em seguida, Jesus chamou a multidão para perto de si e disse: “Escutai, todos, e compreendei: 15o que torna impuro o homem não é o que entra nele vindo de fora, mas o que sai do seu interior. 21Pois é de dentro do coração humano que saem as más intenções, imoralidades, roubos, assassínios, 22adultérios, ambições desmedidas, maldades, fraudes, devassidão, inveja, calúnia, orgulho, falta de juízo. 23Todas estas coisas más saem de dentro, e são elas que tornam impuro o homem”. — Palavra da Salvação.

Homilias PNSConceição RB
Padre Júlio César | Domingo, 29 de Agosto de 2021

Homilias PNSConceição RB

Play Episode Listen Later Aug 30, 2021 16:09


22º Domingo do Tempo Comum Anúncio do Evangelho (Mc 7,1-8.14-15.21-23) Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos'. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 14Em seguida, Jesus chamou a multidão para perto de si e disse: “Escutai, todos, e compreendei: 15o que torna impuro o homem não é o que entra nele vindo de fora, mas o que sai do seu interior. 21Pois é de dentro do coração humano que saem as más intenções, imoralidades, roubos, assassínios, 22adultérios, ambições desmedidas, maldades, fraudes, devassidão, inveja, calúnia, orgulho, falta de juízo. 23Todas estas coisas más saem de dentro, e são elas que tornam impuro o homem”. — Palavra da Salvação.

Homilias do Cônego Darcie
Homilias do Cônego Darcie - 29/08/2021

Homilias do Cônego Darcie

Play Episode Listen Later Aug 29, 2021 17:57


22º Domingo do Tempo Comum Mc 7,1-8.14-15.21-23 Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos'. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 14Em seguida, Jesus chamou a multidão para perto de si e disse: “Escutai, todos, e compreendei: 15o que torna impuro o homem não é o que entra nele vindo de fora, mas o que sai do seu interior. 21Pois é de dentro do coração humano que saem as más intenções, imoralidades, roubos, assassínios, 22adultérios, ambições desmedidas, maldades, fraudes, devassidão, inveja, calúnia, orgulho, falta de juízo. 23Todas estas coisas más saem de dentro, e são elas que tornam impuro o homem”. — Palavra da Salvação. — Glória a vós, Senhor.

夫婦ユニット長月ラジオ(長ラジ)
#556 マキタvsダイソン 最強の掃除機はどっち? from Radiotalk

夫婦ユニット長月ラジオ(長ラジ)

Play Episode Listen Later Jul 2, 2021 11:59


マキタの掃除機ブログ↓ https://nagatsuki.life/diary/41957.html マキタも掃除機、オススメです。 ダイソンやエレクトロラックスもいいので、悩みますよね。 ダイソンに似た形の掃除機が多いので、あれが掃除機の最終形態なのかも。 マキタを買うのなら、個人的に ・紙パック式ではなく、カプセル式を。 ・電源ボタンは、トリガー式ではなく、スイッチ式を。 ・バッテリー容量、自宅だけなら10.8Vを、お店など面積が広いなら14.4Vを。 ダイソン、エレクトロラックス、シャープ、パナソニックの掃除機は家電のレンタルサイト、レンティオでレンタルしてみるのもいいかもです。↓ https://www.rentio.jp/t/genre/cleaner/vacuum-cleaner #長ラジ #長月ラジオ #長ラジ556 #夫婦 #岐阜 #各務原市 #掃除機 #マキタ #ダイソン #2021年7月3日 オゼキカナコのnote https://note.com/kanakoozeki 長月ブログ https://nagatsuki.life オゼキカナコ https://twitter.com/nagatsuki_life 長月コージ https://twitter.com/nagatsuki_books マシュマロ(匿名での質問)はこちらから↓ https://marshmallow-qa.com/nagatsuki_books チョコマシュマロだと嬉しくてすぐに配信します。 差し入れはこちらから↓ https://www.amazon.co.jp/hz/wishlist/ls/23FVSP24BOLHH?ref_=wl_share

Simon Bowkett's Podcast
1 Thessalonians 5:1-11 ... Living in the Light of Christ's Return

Simon Bowkett's Podcast

Play Episode Listen Later Mar 27, 2021 27:24


Twenty-seven minutes from https://twitter.com/WelshRev at https://www.facebook.com/TyrBugail for https://www.facebook.com/Grace.Wales.online , https://welshrev.blogspot.com/and https://yGRWP.comShownotes:I.       IntroductionII.      It's going to be a surprise, vv. 1-3     a)      Times and dates"Now, brothers and sisters, about times and dates we do not need to write to you”      b)      Like a thief in the night          i) The Day of the Lord          ii) Like a thief in the night     c)      Soothings-sayers will be exposedIII.         But you are not going to be 'surprised', vv. 4-5     a) You’re NOT in the dark     b) You are by nature and ethics daylight people     c) We BELONG to the illuminated zoneIV.         Here's how to live your life in the light, BECAUSE He's coming, vv. 6-8V.      Here's your motivation to be doing just that, vv. 9-10VI.         Conclusion, v. 11     A.      Encourage one another     B.      Build one another upTranscript:https://welshrev.blogspot.com/2021/03/1-thessalonians-51-11-living-in-light.htmlSupport the show (https://www.give.net/20229353)

Palavra do Dia
Palavra do dia - Mc 7,1-13 - 09/02/21

Palavra do Dia

Play Episode Listen Later Feb 9, 2021 4:39


Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos’. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus, a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: ‘Honra teu pai e tua mãe’. E ainda: ‘Quem amaldiçoa o pai ou a mãe deve morrer’. 11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: ‘O sustento que vós poderíeis receber de mim é Corban, isto é, Consagrado a Deus’. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a Palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”.

Canal Católico
Hipocrisia - 5ª Semana Comum | Terça-feira

Canal Católico

Play Episode Listen Later Feb 9, 2021 8:18


5ª Semana Comum | Terça-feira I09/02/2021Evangelho do dia (Mc 7,1-13)Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado.3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre.5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos’. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”.9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus, a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: ‘Honra teu pai e tua mãe’. E ainda: ‘Quem amaldiçoa o pai ou a mãe deve morrer’.11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: ‘O sustento que vós poderíeis receber de mim é Corban, isto é, Consagrado a Deus’. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a Palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”.Palavra da Salvação.Glória a vós, Senhor.

Homilias PNSConceição RB
Padre Pedro | Terça, 09 de fevereiro de 2021

Homilias PNSConceição RB

Play Episode Listen Later Feb 9, 2021 8:00


Homilia da 5ª Semana do Tempo Comum. Evangelho (Mc 7,1-13) Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos'. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus, a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: ‘Honra teu pai e tua mãe'. E ainda: ‘Quem amaldiçoa o pai ou a mãe deve morrer'. 11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: ‘O sustento que vós poderíeis receber de mim é Corban, isto é, Consagrado a Deus'. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a Palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”. — Palavra da Salvação.

Liturgia Diária
‘Este povo me honra com os lábios, mas seu coração está longe de mim" Mc. 7,1-13 São Miguel Febres, rogai por nós 09/02

Liturgia Diária

Play Episode Listen Later Feb 9, 2021 5:37


Evangelho (Mc 7,1-13)São Miguel Febres, rogai por nós. 09/02 Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos'. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus, a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: ‘Honra teu pai e tua mãe'. E ainda: ‘Quem amaldiçoa o pai ou a mãe deve morrer'. 11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: ‘O sustento que vós poderíeis receber de mim é Corban, isto é, Consagrado a Deus'. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a Palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”. — Palavra da Salvação. --- Send in a voice message: https://anchor.fm/pe-jose-vicente/message

O Poder da Oração
Santa Missa direto do Santuário de Fátima em Portugal - Evangelho (Mc 7,1-13) - 5ª Semana Comum | Terça-feira - 09/02/2021

O Poder da Oração

Play Episode Listen Later Feb 9, 2021 53:26


Primeira Leitura (Gn 1,20–2,4a) Leitura do Livro do Gênesis. 1,20Deus disse: “Fervilhem as águas de seres animados de vida e voem pássaros sobre a terra, debaixo do firmamento do céu”. 21Deus criou os grandes monstros marinhos e todos os seres vivos que nadam, em multidão, nas águas, segundo as suas espécies, e todas as aves, segundo as suas espécies. E Deus viu que era bom. 22E Deus os abençoou, dizendo: “Sede fecundos e multiplicai-vos e enchei as águas do mar, e que as aves se multipliquem sobre a terra”. 23Houve uma tarde e uma manhã: quinto dia. 24Deus disse: “Produza a terra seres vivos segundo as suas espécies, animais domésticos, répteis e animais selvagens, segundo as suas espécies”. E assim se fez. 25Deus fez os animais selvagens, segundo as suas espécies, os animais domésticos segundo as suas espécies, e todos os répteis do solo segundo as suas espécies. E Deus viu que era bom................ - Palavra do Senhor. - Graças a Deus. Salmo Responsorial (Sl 8) — Ó Senhor nosso Deus, como é grande vosso nome por todo o universo! — Ó Senhor nosso Deus, como é grande vosso nome por todo o universo! — Contemplando estes céus que plasmastes e formastes com dedos de artista; vendo a lua e estrelas brilhantes, perguntamos: “Senhor, que é o homem, para dele assim vos lembrardes e o tratardes com tanto carinho?” — Pouco abaixo de Deus o fizestes, coroando-o de glória e esplendor; vós lhe destes poder sobre tudo, vossas obras aos pés lhe pusestes. — As ovelhas, os bois, os rebanhos, todo o gado e as feras da mata; passarinhos e peixes dos mares, todo ser que se move nas águas. Evangelho (Mc 7,1-13) — O Senhor esteja convosco. — Ele está no meio de nós. — PROCLAMAÇÃO do Evangelho de Jesus Cristo + segundo Marcos. — Glória a vós, Senhor. Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos'. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus, a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: ‘Honra teu pai e tua mãe'. E ainda: ‘Quem amaldiçoa o pai ou a mãe deve morrer'. 11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: ‘O sustento que vós poderíeis receber de mim é Corban, isto é, Consagrado a Deus'. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a Palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”. — Palavra da Salvação. — Glória a vós, Senhor.

O Poder da Oração
Santa Missa direto do Santuário de Aparecida - 22ª Semana do Tempo Comum | Sábado - 05/09/20

O Poder da Oração

Play Episode Listen Later Sep 5, 2020 51:47


Primeira Leitura (1Cor 4,6b-15) Leitura da Primeira Carta de São Paulo aos Coríntios. 6bIrmãos, apliquei essa doutrina a mim e a Apolo, por causa de vós, para que o nosso exemplo vos ensine a não vos inchar de orgulho, tomando o partido de um contra outro, e a “não ir além daquilo que está escrito”. 7Com efeito, quem é que te faz melhor que os outros? Que tens que não tenhas recebido? Mas, se recebeste tudo que tens, por que, então, te glorias, como se não o tivesses recebido? 8Vós já estais saciados! Já vos enriquecestes! Sem nós, já começastes a reinar! Oxalá estivésseis mesmo reinando, para nós também reinarmos convosco! 9Na verdade, parece-me que Deus nos apresentou, a nós apóstolos, em último lugar, como pessoas condenadas à morte. Tornamo-nos um espetáculo para o mundo, para os anjos e os homens. 10Nós somos os tolos por causa de Cristo, vós, porém, os sábios nas coisas de Cristo. Nós somos os fracos; vós, os fortes. Vós sois tratados com toda a estima e atenção, e nós, com todo o desprezo. 11Até a presente hora, padecemos fome, sede e nudez; somos esbofeteados e vivemos errantes; 12fadigamo-nos, trabalhando com as nossas mãos; somos injuriados, e abençoamos; somos perseguidos, e suportamos; 13somos caluniados, e exortamos. Tornamo-nos como que o lixo do mundo, a escória do universo, até o presente. 14Escrevo-vos tudo isto, não com a intenção de vos envergonhar, mas para vos admoestar como meus filhos queridos. 15De fato, mesmo que tivésseis dez mil educadores na vida em Cristo, não tendes muitos pais. Pois fui eu que, pelo anúncio do Evangelho, vos gerei em Jesus Cristo. - Palavra do Senhor. - Graças a Deus. Salmo Responsorial (Sl 144) — O Senhor está perto de quem o invoca! — O Senhor está perto de quem o invoca! — É justo o Senhor em seus caminhos, é santo em toda obra que ele faz. Ele está perto da pessoa que o invoca, de todo aquele que o invoca lealmente. — O Senhor cumpre os desejos dos que o temem, ele escuta os seus clamores e os salva. O Senhor guarda todo aquele que o ama, mas dispersa e extermina os que são ímpios. — Que a minha boca cante a glória do Senhor e que bendiga todo ser seu nome santo desde agora, para sempre e pelos séculos. Evangelho (Lc 6,1-5) — O Senhor esteja convosco. — Ele está no meio de nós. — PROCLAMAÇÃO do Evangelho de Jesus Cristo + segundo Lucas. — Glória a vós, Senhor. 1Num sábado, Jesus estava passando através de plantações de trigo. Seus discípulos arrancavam e comiam as espigas, debulhando-as com as mãos. 2Então alguns fariseus disseram: “Por que fazeis o que não é permitido em dia de sábado?” 3Jesus respondeu-lhes: “Acaso vós não lestes o que Davi e seus companheiros fizeram, quando estavam sentindo fome? 4Davi entrou na casa de Deus, pegou dos pães oferecidos a Deus e os comeu, e ainda por cima os deu a seus companheiros. No entanto, só os sacerdotes podem comer desses pães”. 5E Jesus acrescentou: “O Filho do Homem é senhor também do sábado”. — Palavra da Salvação. — Glória a vós, Senhor. --- Send in a voice message: https://anchor.fm/cassiordl/message

MacroFab Engineering Podcast
MEP EP#240: Disturbed Solder Accuracy

MacroFab Engineering Podcast

Play Episode Listen Later Sep 2, 2020 40:40


MEP EP#240: Disturbed Solder AccuracyParker Got a fully automatic screen printer! ESE US-2000X Potentially lower our minimal paste size Twitch Live Stream podcasts? Amazon multimeter probes Stephen High voltage low current measurement Don't want to break the connection so a traditional ammeter isn't going to work Sticking with the read both sides of a resistor method Caddock 1776-C681 high voltage high resistance high tolerance divider 1/100 so 0 to 500v becomes 0 to 5v ADC - MCP3551-E/SN 22 bit SPI 2.4 meg ohm input impedance Ideally the voltage divider has a “gain” of 0.01 but if the ADC is directly attached to the divider the gain is around 0.0096 Full scale would be 4.8V instead of 5V Solution: add a buffer AD8244BRMZ Quad buffer Typical offset voltage of 100uV Gain error of 0.03% max on +/-15v rails 10T ohm and 4pf input resistance/capacitance - 10^12 Gain error is now 0.009999999901 - Close enough

Adafruit Industries
EYE on NPI - Renesas MRAM

Adafruit Industries

Play Episode Listen Later Jun 25, 2020 15:19


This week's EYE on NPI takes a look at a new kind of memory called MRAM - and some fresh new QSPI memory chips from Renesas that let you try out MRAM for your embedded projects! (https://www.digikey.com/en/product-highlight/r/renesas/m1000-m3000-series-mram) Memory and memory management is one of the trickiest challenges for an engineer, when it comes time to optimize power, speed and performance because you bump up against many of the restrictions different types of memory have - and the reason there's so many types of memory is cause there's no one perfect type of memory storage. Just about every microcontroller has two kinds of storage - flash storage and RAM storage. RAM storage is just like the kind you have in your computer - except a few KB usually, instead of GB. RAM storage is pretty expensive, which is why a microcontroller that is only a few bucks has only a few KB. BUT RAM is really fast - you can read and write to any section of RAM within one or two instructions. There's one down-side to this speed - when the microcontroller is reset, or power is lost, the RAM is also lost. For that reason, your microcontroller has the other kind of memory - flash - to store the program itself. Otherwise, your program would just disappear when you unplugged it (not good!). Flash memory is pretty inexpensive, so you usually get much more flash than RAM. Once in a while you also get microcontrollers that have a separate flash memory area, often referred to as EEPROM. Usually this is used for storing configurations, calibrations, identifiers, etc. So normally, you've got non-volatile flash storage for code, volatile RAM storage for running the code, and maybe a smidge of EEPROM. Say you want to build a sensor data logger - you can't store the data in RAM, because you'll lose it when power is lost. You can't safely stick it in flash because that's where your code lives, and EEPROM is way too small. No problem, you can buy external non-volatile flash memory for microcontrollers! Again, for small amounts of storage, say less than 64K you can get low cost I2C EEPROM (https://www.digikey.com/products/en/integrated-circuits-ics/memory/774?k=i2c%20eeprom). There's one big downside though - while these SPI flash chips have great non-volatility, they have an annoying problem that when you want to change data in a block you have to erase that whole block first, then write the new changed data - and a block is 4KB to 16KB! And erasing takes at least a few milliseconds, if not longer. Same with SD cards by the way. THUS this week's EYE on NPI is interesting to us because it introduces a new kind of memory we've never used before - MRAM for magnetic random access memory. Where as flash memory stores memory by saving a bit by storing charge on a MOSFET gate, MRAM stores it on a ferromagnetic particle that can changed from N to S polarity to store 1 or 0. The core of Avalanche’s STT-MRAM cell is a proprietary perpendicular magnetic tunnel junction (p-MTJ) element which includes including a magnetic fixed layer, a dielectric barrier layer and a changeable ferromagnetic storage layer. The magnetic orientation of the fixed layer is fixed during the manufacturing process. During a programming operation, the magnetic orientation of the storage layer is electrically switched from a parallel state (low resistance state “0”) to an antiparallel state (high resistance state “1”), or vice versa, depending on the current direction through the p-MTJ element. Two distinct resistance states can thus be realized for data storage and sensing. The structure of the p-MTJ element can be tailored for different performance specs and application needs. (http://www.avalanche-technology.com/technology/mram-technology/) What's nice is that every bit/byte can be written or read at any time, no block erases, no delays! You can drive these chips with SPI or QSPI at 100+MHz and down to 1.8V. These chips will be more expensive than NV SRAM or FLASH, but when you need fast writes and reads without waits, these are a great option. Another nice bonus with MRAM is that it is naturally less susceptible to radiation bit-flips - something that folks working on cubesats are super experienced with as a bane of their existence - you send a microcontroller into LEO and the flash memory gets corrupted by high energy particles. While this part is not specifically rad-hard or space-ready, for DIY experimentation, its way way less expensive than official aerospace devices - as seen in the PyCubed dev board (https://circuitpython.org/board/pycubed_mram/) These chips are pin-compatible with most other SPI flash you may have designed in, so it's easy to try out MRAM! Check out the chips on Digi-Key available in 8-SOIC package for easy prototyping! https://www.digikey.com/products/en?keywords=800-M30082040054X0IWAY-ND%20

Adafruit Industries
EYE on NPI: MAX86150 BioSensor Module

Adafruit Industries

Play Episode Listen Later Apr 29, 2020 6:24


This week's EYE ON NPI is a fairly new sensor from MAXIM called the MAX86150 (https://www.digikey.com/en/product-highlight/m/maxim-integrated/max86150-integrated-ppg-and-ecg-biosensor-module). We recently did a video where we took apart an off-the-shelf pulse oximeter (https://www.youtube.com/watch?v=ut7oGkIwRrE) and some folks have asked how they can build their own for learning about bio-sensing, or emergency use. We looked around and found in addition to the common MAX30102 (https://www.digikey.com/product-detail/en/maxim-integrated/MAX30102EFD/MAX30102EFD-ND/6166869), this MAX86150 (https://www.digikey.com/product-detail/en/maxim-integrated/MAX86150EFF-T/MAX86150EFF-TCT-ND/9839125) is a nice Integrated Photoplethysmogram and Electrocardiogram Bio-Sensor Module For Mobile Health. Phew, that's a lot of words, but what it means is that it's an optical sensor for pulse oximetry (https://en.wikipedia.org/wiki/Pulse_oximetry) with the addition of an EKG analog front end (https://en.wikipedia.org/wiki/Electrocardiography). This is pretty rare - usually there's one sensor to manage the optical blood-gas sensing and one to do the electrical heart activity sensing. Why both? For telemedicine or self-monitoring, it might be beneficial to see the electrical activity waveforms as well as the SpO2 measurements since they can signify different health issues. The MAX86150 is an interesting chip in that it has a clear body for IR/Red LED emitting and sensing. Unlike most pulse oximeters we've seen, this does not shine light through the finger, it bounces the light off of the finger tip instead. This makes it a simpler wearable, although the cost is a little higher because of the high integration. One cute thing we noticed in the datasheet is that the sensor automatically detects when there's something in front of the optical sensor so that it will not keep blasting the high power LEDs, a nice power-saving trick! The interface for this chip is I2C, so it's easy to use with just about any chipset. You set the sensor off to collect data and then read the waveform back out. The PPG data is processed by a 19-bit ADC, the EKG is 18-bit and a FIFO collects data in chunks so you can read it at your convenience. Note that the sensor is 1.8V power and logic - it's designed for low power wearables - so you will need level shifting circuitry for use with 5V or 3.3V microcontrollers & microcomputers. Best of all, there's a super-sweet MAX86150 evaluation board (https://www.digikey.com/products/en/development-boards-kits-programmers/evaluation-boards-sensors/795?k=MAX86150) that even has the two 'dry' EKG electrodes you put your fingers over. The board is a FeatherWing, and even comes with a MAXIM Feather board, so you can make a portable BLE sensor. If you want to order up some MAX86150, Digi-Key has tons in stock in both tray and cut tape (https://www.digikey.com/en/product-highlight/m/maxim-integrated/max86150-integrated-ppg-and-ecg-biosensor-module) - visit https://www.digikey.com/product-detail/en/maxim-integrated/MAX86150EFF/MAX86150EFF-ND/7392247 to order this sensor today! ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

O Poder da Oração
Liturgia Diária (Mc 7,1-13) - Devemos preocupar com as coisas de Deus e não com coisas exteriores.

O Poder da Oração

Play Episode Listen Later Feb 12, 2020 24:38


Evangelho (Mc 7,1-13) — O Senhor esteja convosco. — Ele está no meio de nós. — PROCLAMAÇÃO do Evangelho de Jesus Cristo + segundo Marcos. — Glória a vós, Senhor. Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos’. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus, a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: ‘Honra teu pai e tua mãe’. E ainda: ‘Quem amaldiçoa o pai ou a mãe deve morrer’. 11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: ‘O sustento que vós poderíeis receber de mim é Corban, isto é, Consagrado a Deus’. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a Palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”. — Palavra da Salvação. — Glória a vós, Senhor. --- Send in a voice message: https://anchor.fm/cassiordl/message

Paz e Oração
Paz e Oração

Paz e Oração

Play Episode Listen Later Feb 11, 2020 2:50


Evangelho: Marcos 7,1-13 – Naquele tempo, 1os fariseus e alguns mestres da lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos'. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: ‘Honra teu pai e tua mãe'. E ainda: ‘Quem amaldiçoa o pai ou a mãe deve morrer'. 11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: ‘O sustento que vós poderíeis receber de mim é Corban, isto é, consagrado a Deus'. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”. – Palavra da salvação.

Palavra do Dia
Palavra do dia - Mc 7,1-13 - 11/02/20

Palavra do Dia

Play Episode Listen Later Feb 10, 2020 5:18


Naquele tempo, 1os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5Os fariseus e os mestres da Lei perguntaram então a Jesus: “Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?” 6Jesus respondeu: “Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: ‘Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos’. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens”. 9E dizia-lhes: “Vós sabeis muito bem como anular o mandamento de Deus, a fim de guardar as vossas tradições. 10Com efeito, Moisés ordenou: ‘Honra teu pai e tua mãe’. E ainda: ‘Quem amaldiçoa o pai ou a mãe deve morrer’. 11Mas vós ensinais que é lícito alguém dizer a seu pai e à sua mãe: ‘O sustento que vós poderíeis receber de mim é Corban, isto é, Consagrado a Deus’. 12E essa pessoa fica dispensada de ajudar seu pai ou sua mãe. 13Assim vós esvaziais a Palavra de Deus com a tradição que vós transmitis. E vós fazeis muitas outras coisas como estas”.

Hillside Fellowship Podcast
Forever Family | JOY - 12.15.19 Sermon

Hillside Fellowship Podcast

Play Episode Listen Later Dec 17, 2019 39:24


Forever Family - Matthew 2:1-12. Find our outline below. Sermon discussion questions will resume in January!OUTLINEI.   Follow 2:1-2II.  Fear  2:3III.  Forget 2:4-6IV.  Fight 2:7-8V.   Faith 2:9-12*Visit HillsideFellowship.org for more info!* Support the show (https://hillsidefellowship.org/give/)

Homilias do Cônego Darcie
Homilias do Cônego Darcie - 02/09/2018

Homilias do Cônego Darcie

Play Episode Listen Later Sep 2, 2018 17:32


22º Domingo do Tempo Comum Mc 7,1-8.14-15.21-23 Naquele tempo: 1 Os fariseus e alguns mestres da Lei vieram de Jerusalém e se reuniram em torno de Jesus. 2Eles viam que alguns dos seus discípulos comiam o pão com as mãos impuras, isto é, sem as terem lavado. 3Com efeito, os fariseus e todos os judeus só comem depois de lavar bem as mãos, seguindo a tradição recebida dos antigos. 4Ao voltar da praça, eles não comem sem tomar banho. E seguem muitos outros costumes que receberam por tradição: a maneira certa de lavar copos, jarras e vasilhas de cobre. 5 Os fariseus e os mestres da Lei perguntaram então a Jesus: 'Por que os teus discípulos não seguem a tradição dos antigos, mas comem o pão sem lavar as mãos?' 6Jesus respondeu: 'Bem profetizou Isaías a vosso respeito, hipócritas, como está escrito: 'Este povo me honra com os lábios, mas seu coração está longe de mim. 7De nada adianta o culto que me prestam, pois as doutrinas que ensinam são preceitos humanos'. 8Vós abandonais o mandamento de Deus para seguir a tradição dos homens'. 14Em seguida, Jesus chamou a multidão para perto de si e disse: 'Escutai todos e compreendei: 15o que torna impuro o homem não é o que entra nele vindo de fora, mas o que sai do seu interior. 21Pois é de dentro do coração humano que saem as más intenções, imoralidades, roubos, assassínios, 22adultérios, ambições esmedidas, maldades, fraudes, devassidão, inveja, calúnia, orgulho, falta de juízo. 23Todas estas coisas más saem de dentro, e são elas que tornam impuro o homem'. — Palavra da Salvação. — Glória a vós, Senhor.

Talk Up!
EPI 25: Shriveled Balls Makes It Fun

Talk Up!

Play Episode Listen Later Oct 21, 2017 93:45


On this episode we catch each other up on our trips to New Orleans and Grenada. We also go over all the fuck shit that's been happening in the last couple of weeks; Harvey Weinstein, Gab Union's new book, Kobe Bryant, Terry Crews, dvsn's new album "Morning After" and another round of Fuck, Marry, Kill. Press play and enjoy! Brand that made our hats: @8V_collective (Twitter and IG) Podcast we mentioned: @torontodry (Twitter and IG) Designer of our new logo: @h_n_z (Twitter and IG) Our podcast can also be found on: Google Play Music, Stitcher, Podbean, and iTunes Use the hashtags to join our convos: #TalkUp #TalkUpPod Follow the pod: @TalkUpPod (Twitter/Instagram/Snapchat/SoundCloud) RATE! COMMENT! and SUBSCRIBE! to us on iTunes. It helps our ranking A LOT. Check the pinned tweet on our Twitter page for instructions: https://twitter.com/talkuppod DO YOU HAVE SOMETHING YOU WANT TO SAY?: talkuppod@gmail.com Follow the hosts: Sealey: @misssealey (Twitter/Instagram) Rushelle: @rushiexo (Twitter/Instagram) Crystal: @getoutthebox (Twitter/Instagram)

Live from the Desk of Ladyada
#deskofladyada LIVE SAMD51

Live from the Desk of Ladyada

Play Episode Listen Later Jul 31, 2017 48:41


https://blog.adafruit.com/2017/08/01/the-atsamd51-is-here-adafruit-microchipmakes-atsamd51/ Wow some awesome release news from Microchip about a fancy new chip that just dropped. If you know us (and you’re reading this blog so yeah you probably do) you know we just luuuuv the ATSAMD21 – featured in our M0 Feathers, Metro M0 and even the new Gemma M0 we just put in the shop. The ATSAMD21 has always felt to us like the next evolution for fans of the 8-bit AVRs like the ATmega and ATtiny series – with 256 KB of flash, 32 KB of RAM, 48 MHz Cortex M0+ chipset, USB, tons of timers, peripherals, ADC, DAC, up to 6 SPI/I2C/UART devices… using the SAMD21 feels so roomy and comfortable. Adafruit 2132 One of the most fun projects we’ve had over the last year is porting MicroPython to the ATSAMD21 (which we call CircuitPython since the API deviated a bit). Now, MicroPython works just fine on the SAMD21 and you can build many projects quickly, using the built in Python 3 interpretter. And while we absolutely adore it, it’s just a *little bit* sluggish on the ATSAMD21 as its only a Cortex M0 at 48MHz, and doesn’t have any hardware floating point support. And 32KB of RAM is huge for Arduino but CircuitPython can run out of memory if you’re doing a lot. As we started exploring CircuitPython more and more it became clear we could really use an upgrade path. So we asked Microchip “heyyyy so is there like an upgrade to the atsamd21 that’s maybe a cortex m3 or m4, with more RAM and maybe 100 MHz?” and they were all like “maaaybeeee….plz sign this NDA” and we were like “sweet!” and we got a bunch of ATSAMD51 chips and a datasheet! You can check out the no-longer-sekret datasheet here (PDF). The ATSAMD51 is to the ATSAMD21 as it was in turn to the ATMega328. More! Better! Faster! Here are some quick specs: Cortex M4 core running at 120 MHz Hardware DSP and floating point support Up to 1 MByte flash, 192 KB RAM Sizes ranging from 48-QFN to 128-TQFP (the 48 QFN is *nearly* pin compatible with the ATSAMD21 but it isnt 100% drop in compatible) Some neat new peripherals/upgrades: Built in 1.8V buck for lower power uses (needs an external inductor) Dual 1MSPS DAC Dual 1MSPS ADC Parallel capture controller (for camera/video in) Built in crypto engines with AES (256 bit), true RNG, Pubkey controller Ethernet MAC on the SAME5 series QSPI for fast SPI transfers CAN Bus SD/MMC controller “configurable custom logic” – this one is particularly interesting/weird, you get latches and LUT you can link up PDEC – rotary encoder hardware support The speed, and extra space makes it excellent for our next generation of CircuitPython boards, and the price is pretty good too – only about $3 each for the ATSAMD51G19 in reel qty. Considering its the same list price as an ATmega32u4 it’s an easy choice for us! We also like that the pricing is so competitive with other Cortex M4 suppliers, e.g. STM32F405RGT6 is ~$6.50/1K pcs and the similar ATSAMD51J20A is $3.70 (the STM is faster, the SAM has more RAM, it was hard to find a perfect 1:1 comparison) compared to the Kinetis K20 series (famous for being used in the Teensy 3.2) the MK20DX256 has 25% of the Flash size, 25% as much RAM, 60% of the speed, but costs $1-1.25 more. Competition is heating up! Ambahlahdolnogpf Any how, the Atmel ATSAMD51 series looks really awesome to me, and its now public and you can order some chips even from microchip direct. Some chips are in stock now, such as the ATSAMD51N20A-AU, ATSAMD51P19A-AU, others will be shipping in late October. We’ve already started designing a Feather M4 and Metro M4 and we’ve even gotten it going with Arduino core with some tweaks to the current SAMD core. Img 7279 Excited to try out this chip? We don’t have hardware for sale quite yet (and likely won’t until chips are shipping in larger qty in November) but if you have early hardware access for some reason you can check out our forked Arduino SAMD codebase at https://github.com/adafruit/ArduinoCore-samd/tree/samd51 for our latest code – full 120MHz clocking, GPIO, ADC, DAC, I2C/SPI/UART, USB all basically work but there’s a few tweaks and bugfixes still. The BOSSA bootloader working here: https://github.com/adafruit/ArduinoCore-samd/tree/samd51/bootloaders/x1 and the software bootloader tool here: https://github.com/adafruit/BOSSA_x1/tree/arduino We hope to get these all merged into mainline soon, and also a CircuitPython port that can take advantage of the awesome power that can be unleashed! ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ Music by bartlebeats: http://soundcloud.com/bartlebeats -----------------------------------------

MacroFab Engineering Podcast

Podcast Notes If you enjoy listening to MEP, please let others know about us! Tell a coworker, loved one, friend, or share it on "social media".  We might reward your love for us by sending you a free koozie! Tell others how much you love us, then send us an email to podcast@macrofab.com with the codeword that we’ll mention during the show. Each show has a different codeword, so keep an ear out. MacroFab and Mouser Electronics have teamed up to create a free monthly meetup in Houston (April 26th) for anyone involved with hardware & electronics engineering or manufacturing. Hosted on the last Wednesday of every month, these meetups are designed to build a community of professionals who want to learn from one another, gain new insights on emerging electronics technologies, and expand their network. Sign up here! What to expect  Networking Fireside chats with Q&A Individual project sharing and discussion Door prizes Refreshments Parker has been working on the next step of the RPI3 LVDS project. Pinout the SODIMM connector for the RPI3 Compute Module. See Figure 1. Part number 1473149-4 by TE Connectivity LVDS DS90C365A IC is net listed up Trying to use the PWM function to control the backlight of the LCD. GPIO40 is PWM0 on the RPI3 Still to be done Power 1.8V, 3.3V, 12V SD card HDMI USB and a USB Hub Break out all the pins Test points for clk signals and data streams Stephen has a challenge for the listeners. Goal: A design for a ring of LEDs that surround a control knob on a synthesizer and light up according to the position of the knob Requirements The circuit must connect to a potentiometer (this can be a dual gang version) example: rv16a01f The ring of LEDs must be centered on a 12mm radius around the potentiometer. Whole circuit must not be larger 1.2” W x 1.2”H x 1.2”D PCB can solder directly to pins on potentiometer Multiple PCBs is acceptable if needed Color of the leds does not matter although green or red is preferable Number of leds is 16 minimum and 32 maximum LEDs are arranged on a 300 degree arc (potentiometer has 300 degrees of rotation) starting at 240 degrees and ending at -60 degrees The circuit will receive external 5V power so it must have through hole pads for power and gnd CHEAP CHEAP CHEAP! Do this for as cheap as possible Rapid Fire Opinion Revealing Capcom’s Custom Silicon Security - Hackaday Capcom developed their arcade boards to die with their secrets through a “suicide” system. System name CSP-2 Basically all the game code was encrypted and the key was stored in volatile ram kept alive by a battery. Reminds Parker of the reflow oven that MacroFab currently use. NXP chip checks your booze - Electronics Weekly The Tag uses NXP’s NTAG 213 Tag Tamper technology which checks the origin of the bottle, detects if the bottle has been opened, and creates a

power system color csp leds lcd mep nxp pwm 3v 5v 8v pinout macrofab houston april mouser electronics