POPULARITY
Connor Rigby joins the Elixir Wizards to talk about Blue Heron BLE (Bluetooth Low Energy) support for Elixir apps. Blue Heron implements the BLE specs in pure Elixir, leveraging binary pattern matching and concurrent message processing to handle Bluetooth protocols. Unlike most solutions that require C ports or NIFs, Blue Heron runs entirely in user space, so it works seamlessly in both Nerves-based embedded projects and (eventually) desktop Elixir applications. We discuss how Nerves development differs from building Phoenix apps. Connor shares challenges he's experienced with hardware compatibility, where some chips only partially implement the spec, and he discusses the surprisingly deep (but sometimes incomplete) world of BLE device profiles. His tip for anyone entering the BLE space: read the official spec instead of trusting secondhand blog posts. Tools like Nerves LiveBook give you hands-on examples, so you can get a BLE prototype running on a Raspberry Pi and your phone in no time. Key topics discussed in this episode: Blue Heron origins and “bird” naming convention BLE vs. Bluetooth Classic: core differences Pure Elixir implementation—no C dependencies Binary pattern matching for packet parsing Hardware transport options: UART, SPI, USB, SDIO GenServer patterns in Nerves vs. Phoenix Linux requirement and power-consumption trade-offs GATT (Generic Attribute Table) implementation patterns SQLite integration for Nerves apps Hardware chip quirks and spec compliance Manufacturer-specific commands and workarounds BLE device profiles and spec gaps Security Management Profile (SMP) for encryption Device connection and pairing workflows Web vs. embedded development differences Where to get started: hardware recommendations and docs Links mentioned: https://github.com/ConnorRigby/ https://github.com/blue-heron/ https://nerves-project.org/ BLE (Bluetooth Low Energy) https://en.wikipedia.org/wiki/BluetoothLowEnergy https://developer.apple.com/ibeacon/ https://learnyousomeerlang.com/building-otp-applications Linux https://www.linux.org/ HCI (Host Controller Interface) https://en.wikipedia.org/wiki/Hostcontrollerinterface Circuits UART Library https://hexdocs.pm/circuitsuart/readme.html SPI (Serial Peripheral Interface) https://github.com/elixir-circuits/circuitsspi SDIO (Secure Digital Input Output https://en.wikipedia.org/wiki/SDIO Raspberry Pi https://www.raspberrypi.com/ Coral SoM Dev Board https://coral.ai/products/dev-board/ BeagleBone Single-Board Linux Computer https://www.beagleboard.org/boards/beaglebone-black https://www.bluetooth.com/bluetooth-resources/intro-to-bluetooth-gap-gatt/ Genservers https://hexdocs.pm/elixir/1.12/GenServer.html https://hexdocs.pm/ecto/Ecto.html https://github.com/elixir-sqlite/ectosqlite3 https://github.com/nerves-livebook/nerveslivebook Special Guest: Connor Rigby.
KeywordsBitcoin, open source, decentralization, mining, APIs, UTX Oracle, firmware, Bitcoin price, self-sovereignty, hardwareSummaryThis conversation delves into the significance of open source in Bitcoin mining, emphasizing its role in decentralization and innovation. The speakers discuss various open source projects aimed at improving mining efficiency, the challenges posed by current mining firmware, and the potential of the UTX Oracle in providing a crowdsourced Bitcoin price. They also explore the future of open source in Bitcoin mining hardware, highlighting the need for greater control and transparency in the mining process.TakeawaysBitcoin is a combination of many innovative ideas.Open source is crucial for the decentralization of Bitcoin.Bitcoin mining must also be open source to remain decentralized.PyASIC simplifies monitoring for Bitcoin miners.The UTX Oracle offers a more reliable Bitcoin price.Current mining firmware is poorly designed and limits control.Greater control over mining operations can enhance profitability.Crowdsourcing Bitcoin price through UTX Oracle is revolutionary.Self-sovereignty in Bitcoin mining is essential.Open source hardware faces significant challenges but is possible.Chapters00:00 Decentralizing Bitcoin Mining: An Introduction01:50 The Importance of Open Source in Bitcoin04:55 Innovative Tools for Bitcoin Miners08:06 Challenges with Current Mining Firmware10:52 Curtailment and Control in Mining Operations13:49 The Role of UTX Oracle in Bitcoin Pricing16:44 Crowdsourcing Bitcoin Price Data20:06 The Future of Open Source Hardware in Bitcoin Mining22:56 Community Engagement and Open Source Contributions
This week on the Podcast, Hackaday's Elliot Williams and Kristina Panos joined forces to bring you the latest news, mystery sound, and of course, a big bunch of hacks from the previous week. First up in the news: Elliot was at Electronica and spotted a wild Raspberry Pi Compute Module 5. And just as excitingly, FreeCAD has finally reached version 1.0, which means it's stable and ready for real work. Kristina is getting tired of losing at What's That Sound, so she'll have to come up with some to stump you all. Can you get this week's sound? If you can, and your number comes up, you get a special Hackaday Podcast t-shirt. Then it's on to the hacks and such, but first, there's even more news and opinion to be had in Tom's review of Prusa's new printer, which happens to be closed-source. Then we'll discuss another printer that prints upside-down, an elegant cyberdeck, and a cyberpunk pocket watch. Finally, we talk about the Great Redbox Cleanup, and take a look at man-made stalactites.
The Infill Podcastâ„¢ - The Place For 3D Printing, Makers, and Creators!
In this episode, we're joined by Martin Owens, Inkscape developer. Brought to you by PCBWay. Register at https://jle.vi/pcbway and get a $5 welcome bonus!Meet Martin Owens, a dedicated Free and Open Source developer with a passion for Inkscape, a leading graphics program used by designers and creators worldwide. As an independent contractor, Martin collaborates closely with his financial supporters to shape the future of Inkscape, focusing on features that empower users. Through engaging videos and social media updates, he shares progress and insights into his work, making Inkscape an invaluable tool for graphic designers and 3D printing enthusiasts alike. Join us as we dive into the world of open-source development and creativity!
It is challenging to succeed with open hardware while keeping it sustainable and still making enough money to pay the bills. But there are ways to do it!In this episode, we dive into how you can succeed in doing open hardware. Plus, we talk about how vastly different open hardware is compared to open software.Do you have any questions, comments, or topic suggestions? Email us at podcast@opulo.io. We'd love to hear from you!To find out more about what we do, check out Opulo.ioTo see everything else we do, including social media, check out Opulo.start.pageO.H.M. Podcast Merch is now here!Intro song:Complicate Ya - Otis McDonald (Creative Commons Attribution License)Ad song:Forever Young - Otis McDonald (Creative Commons Attribution License) Hosted on Acast. See acast.com/privacy for more information.
The term “open source” is celebrating its 25th anniversary this year. It originally started out as a rebellious gesture to allow everybody access to programmes and ideas. So how did something that began as a movement against big corporations grow into one that has been adopted by Fortune 500 companies?In this episode we'll be looking at where open source technology sits as a functioning tool in the age of VR and AR, and if we're going to see open source software being coded by open platform AI, with Distinguished Technologist for Open Platform at Hewlett Packard Enterprise, Jean-Marie Verdun.This is Technology Now, a weekly show from Hewlett Packard Enterprise. Every week we look at a story that's been making headlines, take a look at the technology behind it, and explain why it matters to organizations and what we can learn from it.Do you have a question for the expert? Ask it here using this Google form: https://forms.gle/8vzFNnPa94awARHMAAbout the expert: https://www.linkedin.com/in/jean-marie-verdun-5669902/Sources and statistics cited in this episode:How the term “Open Source” came about: https://opensource.com/article/18/2/coining-term-open-source-softwareOpen Source technology's roots in rebellion: https://opensource.com/article/21/4/motivates-open-source-contributorsHow much the Open Source market was worth in 2022: https://www.precedenceresearch.com/open-source-services-market#:~:text=The%20global%20open%20source%20services,forecast%20period%202023%20to%202032.WiFi 7 announcement: https://www.wi-fi.org/discover-wi-fi/wi-fi-certified-7
Tech behind the Trends on The Element Podcast | Hewlett Packard Enterprise
The term “open source” is celebrating its 25th anniversary this year. It originally started out as a rebellious gesture to allow everybody access to programmes and ideas. So how did something that began as a movement against big corporations grow into one that has been adopted by Fortune 500 companies?In this episode we'll be looking at where open source technology sits as a functioning tool in the age of VR and AR, and if we're going to see open source software being coded by open platform AI, with Distinguished Technologist for Open Platform at Hewlett Packard Enterprise, Jean-Marie Verdun.This is Technology Now, a weekly show from Hewlett Packard Enterprise. Every week we look at a story that's been making headlines, take a look at the technology behind it, and explain why it matters to organizations and what we can learn from it.Do you have a question for the expert? Ask it here using this Google form: https://forms.gle/8vzFNnPa94awARHMAAbout the expert: https://www.linkedin.com/in/jean-marie-verdun-5669902/Sources and statistics cited in this episode:How the term “Open Source” came about: https://opensource.com/article/18/2/coining-term-open-source-softwareOpen Source technology's roots in rebellion: https://opensource.com/article/21/4/motivates-open-source-contributorsHow much the Open Source market was worth in 2022: https://www.precedenceresearch.com/open-source-services-market#:~:text=The%20global%20open%20source%20services,forecast%20period%202023%20to%202032.WiFi 7 announcement: https://www.wi-fi.org/discover-wi-fi/wi-fi-certified-7
The term “open source” is celebrating its 25th anniversary this year. It originally started out as a rebellious gesture to allow everybody access to programmes and ideas. So how did something that began as a movement against big corporations grow into one that has been adopted by Fortune 500 companies?In this episode we'll be looking at where open source technology sits as a functioning tool in the age of VR and AR, and if we're going to see open source software being coded by open platform AI, with Distinguished Technologist for Open Platform at Hewlett Packard Enterprise, Jean-Marie Verdun.This is Technology Now, a weekly show from Hewlett Packard Enterprise. Every week we look at a story that's been making headlines, take a look at the technology behind it, and explain why it matters to organizations and what we can learn from it.Do you have a question for the expert? Ask it here using this Google form: https://forms.gle/8vzFNnPa94awARHMAAbout the expert: https://www.linkedin.com/in/jean-marie-verdun-5669902/Sources and statistics cited in this episode:How the term “Open Source” came about: https://opensource.com/article/18/2/coining-term-open-source-softwareOpen Source technology's roots in rebellion: https://opensource.com/article/21/4/motivates-open-source-contributorsHow much the Open Source market was worth in 2022: https://www.precedenceresearch.com/open-source-services-market#:~:text=The%20global%20open%20source%20services,forecast%20period%202023%20to%202032.WiFi 7 announcement: https://www.wi-fi.org/discover-wi-fi/wi-fi-certified-7
ASK AN ENGINEER 11/1/2023 LIVE! Visit the Adafruit shop online - http://www.adafruit.com @3:37 Freebies @8:58 As seen on Show&Tell @11:12 As seen on Desk of LadyAda @15:00 JP's Product Pick of the week @17:27 Time Travel @22:15 IOT @23:42 Python on Hardware @31:37 Open Source Hardware @34:12 Advanced Manufacturing/Made in NYC @35:38 3D Printing @38:44 Eye on NPI @51:20 New Products @56:15 Questions @1:01:00 Interview with Eli from NXP ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------
On this episode, I have a fun discussion with Scott Christianson. Scott is an Associate Teaching Professor of management at the Trulaske College of Business at the University of Missouri. Scott's interests are focused on the impact of emerging technology on society and human well-being. Prior to joining the college, he was a business owner with decades of experience in videoconferencing technology, project management, and information technology. “This is a great time to learn on your own.” – Scott Christianson Today on the Tech Leader Talk podcast: - How to start using open source hardware in your business - A student's project that used open source hardware to prototype a “calving collar” for cows - What Scott enjoys most about working in the academic world - New platforms for flexible learning (remote, in-person, and hybrid) Resources Mentioned: Arist (training platform): https://arist.co/ Scott's Newsletter: https://frtech.substack.com/welcome Instructables: https://www.instructables.com/ Arduino: https://www.arduino.cc/ Raspberrypi: https://www.raspberrypi.org/ Adafruit: https://www.adafruit.com/ SparkFun: https://www.sparkfun.com/ Connect with Scott: LinkedIn: https://www.linkedin.com/in/jscottchristianson/ Website: https://www.christiansonjs.com/ Thanks for listening! Be sure to get your free copy of Steve's latest book, Cracking the Patent Code, and discover his proven system for identifying and protecting your most valuable inventions. Get the book at https://stevesponseller.com/book.
Lukas Henkel, our guest in this episode was already into electronic engineering at age 10. He will share with us what made him interested in designing electronics, some details about the development of his Open-source laptop project, and will even give us a sneak peek of the actual design development on Altium Designer. You don't want to miss this! Watch through the end and be sure to check the additional resources below. Watch this episode here Get Your First Month of Altium Designer® for FREE Episode Highlights: Lukassz Lawrocki, Technical Marketing Manager at Altium makes a special appearance to explain Altium's new initiative that encourages and supports electrical engineers to create open-source projects The open source Laptop project by Lukas Henkel is the first project to be supported by this new initiative Introduction to Lukas Henkel Lukas talks about his background and his first electronic project at age 10 Robert Feranec and the Altium OnTrack Podcast are just a couple of Lukas's inspirations for discovering his interest in electronics and PCB design Lukas chose a laptop for his open-source project because of its composition—a variety of components working together Electrical vs mechanical, which one did Lukas find more challenging? The laptop project will have a full aluminum body, which is a cheaper choice for producing prototypes in a smaller volume Lukas talks about why the flex part of the enclosure is one of the challenging parts of his project While there are commercial and open-source tools to help with high-speed signal optimization, complex optimization problems are best solved through a manual process — comparing solutions and comparing the impact of each domain Lukas shares his transition from working with Semikron to his own company, OV Tech Zach and Lukas exchange experiences in running their companies - challenges, projects, and clients Lukas encourages everyone who is interested to learn more about his open-source laptop to follow him on LinkedIn for development updates Design Demonstration via Altium designer Watch for Lukas's next project, the Open Source Smartwatch Links and Resources: Connect with Lukas Henkel via LinkedIn Subscribe to Robert Feranec Youtube Channel Watch all previous Altium OnTrack Podcast episodes Watch related episodes: Robert Feranec and IoT Security Open Source Ventilator Project (OSV) Combats Ventilator Shortage Seven Design Guidelines to Break Bad Habits from Using Open-Source Designs Read: Open Source Hardware & PCB Projects in Altium Designer Get Your First Month of Altium Designer® for FREE
Finanzierung von Open-Source-Projekten ist essentiell - Doch welche Möglichkeiten gibt es?Open-Source-Projekte sind wichtiger denn je, in unserer aktuellen Gesellschaft. Projekte wie cURL, OpenSSL, sqlite und Co. werden oft von wenigen Leuten maintained, doch Millionen Menschen nutzen diese jeden Tag, auch oft ohne es zu wissen. Die meisten Open-Source-Projekte werden in der Freizeit maintained. Doch wie passt das zusammen, besonders wenn die Miete gezahlt werden muss und auch Essen auf dem Tisch sein soll?Da kommt das (nicht ganz so einfache) Thema der Finanzierung von Open Source Projekten auf. In dieser Episode gehen wir genau darauf ein und stellen euch ein paar Möglichkeiten vor, wie du Geld mit bzw. für dein Open-Source-Projekt bekommen kannst. Dabei geht es nicht nur um den Platzhirsch GitHub Sponsors, sondern auch um professionelles Sponsoring von Firmen, dem Early-Access-Modell, staatliche Förderungen und so langweilige Themen wie Steuern.Bonus: Was Rundfunkgeräte mit Batterien mit Open-Source zu tun haben und ob Geld wirklich motivierend ist.Das schnelle Feedback zur Episode:
„Open Source fordert hohe Innovationskraft und Geschwindigkeit, man muss immer vor dem Markt sein“, erklärte Ferle im Podcast-Gespräch „Open Source in der Industrie.“ Ihn erinnere Arduino mehr an eine Softwarefirma als an ein Hardwareunternehmen. In den unterschiedlichsten Branchen sei ihnen Arduino begegnet, erklärt Ferle. In der Open-Source-Welt, die stark Software getrieben ist, ist dieser Flywheel-Effekt mit vielen Partnern, in unterschiedlichen Branchen schon seit vielen Jahren bekannt. „Dazu kommt der Fokus auf die Developer Experience, die hebt sich stark von anderen Anbietern ab, sowie die Erweiterbarkeit der Hardware “, meint Ferle.
ASK AN ENGINEER 10/05/2022 LIVE! 5:45 From the desk of Ladyada 7:47 JP's product pick highlight 9:04 Tim Travel 10:43 From the Mailbag 11:14 - The Reel World 15:18 - Help Wanted 16:52 - Python on Hardware 22:19 Open Source Hardware 29:36 Advanced manufacturing factory footage 31:43 3D Printing 35:17 Eye on NPI Double feature! 57:27 New Products 1:00:45 Top Secret 1:02:25 questions! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #adafruit #askanengineer #electronics
Michael Ossmann (@michaelossmann) from Great Scott Gadgets joined us to chat all things SDR, Open Source Hardware, education, and more! Here are links to some of the topics we covered: HackRF One Ubertooth One GreatFET One A Mathematician's Lament WEP Wep dead again article APCO P25 Ettus USRP NTLMv1 Dominic Spill GNU Radio Michael's KiCon Talk gr-bluetooth Michael's awesome video series on SDR http://www.nsaplayset.org/ https://en.wikipedia.org/wiki/NSA_ANT_catalog IMSI Catcher DEF CON 22 - Michael Ossmann - The NSA Playset: RF Retroreflectors https://en.wikipedia.org/wiki/The_Thing_(listening_device) Cyberspies book Samy Kamkar (Featured in Episode 41!) Rolljam Yardstick One https://github.com/nonamecoder/CVE-2022-27254 https://www.rtl-sdr.com/tesla-charging-ports-opened-with-hackrf-replay-attack/ How To Write Pop Horn Parts
In this episode Ricki chats to Welsh Bitcoiner Ben Arc. Ben has spent the past few years developing open source, cheap and easily accessible DIY hardware devices to enable Lightning transactions across a whole host of real world applications, including point of sale terminals, vending machines and ATMs (to name a few). Ben was also instrumental in getting LNBits off the ground. LNBits is an open source software stack which facilitates all kinds of use cases of the Lightning Network interoperating with DIY hardware devices and decentralized systems.We also discussed:- LN URL- NOSTR- Incentive models for merchant adoption of LN and BitcoinSponsors:Bitvice - Bitcoin Sovereignty Simplified - https://bit.ly/35fcuitFollow Ben's work at:Twitter - @arcbtcGithub - https://github.com/arcbtcLNBits - https://lnbits.com/By the Horns:Subscribe to our channels and get notified as soon as a new pod is released!By The Horns is a Bitcoin podcast about South Africa. You can follow our discussions on YouTube or via our podcast on Spotify, Google Podcasts or Apple Podcasts.DisclaimerWe do not provide tax, legal, financial or accounting advice. The material discussed and views expressed on this podcast is intended to be for information purposes only, and is not intended to provide, and should not be relied on for, tax, legal, financial or accounting advice. You should consult your own tax, legal, financial or accounting advice advisors before engaging in any transaction.
Kim McMahon Kim is the Director of Visibility & Community Engagement at RISC-V International and a Co-Chair of the Open Hardware Diversity Alliance. LinkedIn: https://www.linkedin.com/in/kimmcmahonco/ Notes: RISC-V: https://www.linkedin.com/company/risc-v-international/ OHDA: https://diversityhw.org Credits: Music by ikson: https://www.iksonmusic.com
(1:11) - Accelerating New Material Discovery
(1:03) - Self-navigating Smart Cane
MEP EP#298: Has Open Source Hardware Run Its Course? Benjamin Heckendorn An electronics hacking entertainment guru Former host of Element 14's “ The Ben Heck Show” Chris Kraft A tinkerer currently working as a software engineer in the financial services industry Extensive background in 3d printing and building anything that seems interesting Previous Podcasts with Ben and Chris MEP EP#23: Interview with Ben Heck of The Ben Heck Show MEP EP#75: Does the Simulation Match the Reality? MEP EP #153: Discrete Atomic Luffa Control MEP EP #167: BenHeck and the PinoTaur Has Open Source Hardware Run It's Course? A google search of “open hardware” or “open source hardware” yields one of two results A definition of OSHW A lot of requests for is there an open source XYZ? 10 commercially successful open source hardware projects in 2013 Top Open-Source Hardware Websites and Community in 2019 E3D's no-nonsense approach to intellectual property
In this episode of HardwareX podcasts, we talk to Pete Marchetto who is a Research Engineer and Instrumentation Scientist with Conservify, and Principal at Sensing, LLC. His research interests lie in environmental sensing, and creating tools for those in the life sciences who need them. Some of his projects have included applying automated imaging and high-throughput measurement techniques for plant phenotyping, assessing plant stress, and remote health monitoring of poultry, livestock, and farm animals. Dr. Marchetto has published a number of interesting papers in HardwareX which are available freely through Open Access. This podcast episode was recorded, edited, and produced by Santosh Pandey from Iowa State University. The music is provided by jorikbasov from Pixabay (Title: Relaxing Corporate Ambient).
In this episode of HardwareX podcast, we talk to Professor Joshua Pearce who is the co-Editor-in-Chief of HardwareX. Dr. Pearce is the Thompson Chair in Information Technology and Innovation, cross-appointed in the Richard Ivey School of Business and Western University's Department of Electrical and Computer Engineering. Dr. Pearce is a renowned expert on open hardware, low cost 3D printing, and solar photovoltaics. We talk to him about his driving motivation, projects, and vision about the future of open source hardware. This podcast episode was recorded, edited, and produced by Santosh Pandey from Iowa State University. The music is provided by Asepirawan20 from Pixabay (Upbeat Pop Day).
In this episode of the AllThingsXR podcast, I have a conversation with Noah Zerkin, Co-Founder of NOA Labs and CombineReality. Noah Zerkin is a maker and hardware prototyper from New York City. He's been building... The post Episode 28 : Noah Zerkin – Managing an Open Source Hardware Company appeared first on AllThingsXR.com.
Mark Himelstein Mark is the Chief Technology Officer at RISC-V International, a non-profit consortium chartered to standardize, protect, and promote the free and open RISC-V instruction set architecture LinkedIn: https://www.linkedin.com/in/heavenstone/ Notes: https://riscv.org https://www.linkedin.com/company/risc-v-international/ Credits: Music by ikson: https://www.iksonmusic.com
Carl Richell, founder and CEO of System76 joins Jonathan Bennett and Shawn Powers on FLOSS Weekly. He's been selling Linux laptops and desktops for years, and now leads the team behind the easy-to-use Pop!_OS One of his biggest fans, Leo Laporte, also joins the show. Open Firmware, what's new in the OS, and the perfect hardware for keyboard nerds and upcoming news for System 76 are part of the show discussions. Bennett finally gets the scoop behind the "Pop!_OS" name. A fun show with great discussions. Hosts: Jonathan Bennett, Shawn Powers, and Leo Laporte Guest: Carl Richell Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
Carl Richell, founder and CEO of System76 joins Jonathan Bennett and Shawn Powers on FLOSS Weekly. He's been selling Linux laptops and desktops for years, and now leads the team behind the easy-to-use Pop!_OS One of his biggest fans, Leo Laporte, also joins the show. Open Firmware, what's new in the OS, and the perfect hardware for keyboard nerds and upcoming news for System 76 are part of the show discussions. Bennett finally gets the scoop behind the "Pop!_OS" name. A fun show with great discussions. Hosts: Jonathan Bennett, Shawn Powers, and Leo Laporte Guest: Carl Richell Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
Carl Richell, founder and CEO of System76 joins Jonathan Bennett and Shawn Powers on FLOSS Weekly. He's been selling Linux laptops and desktops for years, and now leads the team behind the easy-to-use Pop!_OS One of his biggest fans, Leo Laporte, also joins the show. Open Firmware, what's new in the OS, and the perfect hardware for keyboard nerds and upcoming news for System 76 are part of the show discussions. Bennett finally gets the scoop behind the "Pop!_OS" name. A fun show with great discussions. Hosts: Jonathan Bennett, Shawn Powers, and Leo Laporte Guest: Carl Richell Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
Carl Richell, founder and CEO of System76 joins Jonathan Bennett and Shawn Powers on FLOSS Weekly. He's been selling Linux laptops and desktops for years, and now leads the team behind the easy-to-use Pop!_OS One of his biggest fans, Leo Laporte, also joins the show. Open Firmware, what's new in the OS, and the perfect hardware for keyboard nerds and upcoming news for System 76 are part of the show discussions. Bennett finally gets the scoop behind the "Pop!_OS" name. A fun show with great discussions. Hosts: Jonathan Bennett, Shawn Powers, and Leo Laporte Guest: Carl Richell Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
Carl Richell, founder and CEO of System76 joins Jonathan Bennett and Shawn Powers on FLOSS Weekly. He's been selling Linux laptops and desktops for years, and now leads the team behind the easy-to-use Pop!_OS One of his biggest fans, Leo Laporte, also joins the show. Open Firmware, what's new in the OS, and the perfect hardware for keyboard nerds and upcoming news for System 76 are part of the show discussions. Bennett finally gets the scoop behind the "Pop!_OS" name. A fun show with great discussions. Hosts: Jonathan Bennett, Shawn Powers, and Leo Laporte Guest: Carl Richell Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
Carl Richell, founder and CEO of System76 joins Jonathan Bennett and Shawn Powers on FLOSS Weekly. He's been selling Linux laptops and desktops for years, and now leads the team behind the easy-to-use Pop!_OS One of his biggest fans, Leo Laporte, also joins the show. Open Firmware, what's new in the OS, and the perfect hardware for keyboard nerds and upcoming news for System 76 are part of the show discussions. Bennett finally gets the scoop behind the "Pop!_OS" name. A fun show with great discussions. Hosts: Jonathan Bennett, Shawn Powers, and Leo Laporte Guest: Carl Richell Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
Carl Richell, founder and CEO of System76 joins Jonathan Bennett and Shawn Powers on FLOSS Weekly. He's been selling Linux laptops and desktops for years, and now leads the team behind the easy-to-use Pop!_OS One of his biggest fans, Leo Laporte, also joins the show. Open Firmware, what's new in the OS, and the perfect hardware for keyboard nerds and upcoming news for System 76 are part of the show discussions. Bennett finally gets the scoop behind the "Pop!_OS" name. A fun show with great discussions. Hosts: Jonathan Bennett, Shawn Powers, and Leo Laporte Guest: Carl Richell Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
Welcome to Hardware Addicts, a proud member of the Destination Linux Network. Hardware Addicts is the podcast that focuses on the physical components that powers our technology world. In this episode, we're discussing RISC-V and why companies like Apple are ramping up their investment in this open source architecture. Then we head to camera corner where Wendy will discuss Sony's latest patent on a curved sensor. So Sit back, Relax, and Plug In because Hardware Addicts Starts Now! Products Discussed: - Pinewatch: https://www.pine64.org/pinetime/
3 x 1U and 2 x 1.25U "Ctrl" Silicone Keycap Molds - MX Compatible Switches (0:13) https://www.adafruit.com/product/5079?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 2 x 2.25U, 1 x 2.75U and Space Bar Keycap Mold - MX Compatible Switches (0:13) https://www.adafruit.com/product/5080?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 4 x 1U and 1 x 1.5U "Caps Lock" Silicone Keycap Molds - MX Compatible Switches (0:13) https://www.adafruit.com/product/5078?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 4 x 1U and 1 x 2U "Esc" Silicone Keycap Molds - MX Compatible Switches (0:13) https://www.adafruit.com/product/5119?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 4 x 1U and 1 x 1.25U "Tab" Silicone Keycap Molds - MX Compatible Switches (0:13) https://www.adafruit.com/product/5077?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 3-Pin Wire Joints (3 Pack) (2:44) https://www.adafruit.com/product/5098?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 1N4148 SMT SOD-123 Diodes - 100 Pack (3:49) https://www.adafruit.com/product/5099?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Switch Sockets for Kailh CHOC Compatible Keys - 10 Pack (4:24) https://www.adafruit.com/product/5118?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Kailh CHOC Low Profile Red Linear Key Switches - 10-pack (5:35) https://www.adafruit.com/product/5113?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Kailh CHOC Low Profile White Clicky Key Switches - 10 Pack (5:35) https://www.adafruit.com/product/5114?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Kailh Mechanical Key Switches - Thick Click Jade Box - 10 pack - Cherry MX Compatible (8:03) https://www.adafruit.com/product/5149?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Kailh Mechanical Key Switches - Clicky Navy Blue - 10 pack - Cherry MX Compatible (8:03) https://www.adafruit.com/product/5150?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Wi-Fi Add-on Board for Sony SPRESENSE iS110B (9:14) https://www.adafruit.com/product/5155?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Sensor Add-on Board for Sony Spresense EVK-701 (9:40) https://www.adafruit.com/product/5156?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 64x32 RGB LED Matrix - 2.5mm pitch (10:08) https://www.adafruit.com/product/5036?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Etched Glow-Through Keycap with Open Source Hardware Gear Logo - MX Compatible Switches (12:08) https://www.adafruit.com/product/5115?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts -------------------------------------- Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------
3 x 1U and 2 x 1.25U "Ctrl" Silicone Keycap Molds - MX Compatible Switches (0:13) https://www.adafruit.com/product/5079?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 2 x 2.25U, 1 x 2.75U and Space Bar Keycap Mold - MX Compatible Switches (0:13) https://www.adafruit.com/product/5080?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 4 x 1U and 1 x 1.5U "Caps Lock" Silicone Keycap Molds - MX Compatible Switches (0:13) https://www.adafruit.com/product/5078?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 4 x 1U and 1 x 2U "Esc" Silicone Keycap Molds - MX Compatible Switches (0:13) https://www.adafruit.com/product/5119?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 4 x 1U and 1 x 1.25U "Tab" Silicone Keycap Molds - MX Compatible Switches (0:13) https://www.adafruit.com/product/5077?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 3-Pin Wire Joints (3 Pack) (2:44) https://www.adafruit.com/product/5098?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 1N4148 SMT SOD-123 Diodes - 100 Pack (3:49) https://www.adafruit.com/product/5099?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Switch Sockets for Kailh CHOC Compatible Keys - 10 Pack (4:24) https://www.adafruit.com/product/5118?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Kailh CHOC Low Profile Red Linear Key Switches - 10-pack (5:35) https://www.adafruit.com/product/5113?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Kailh CHOC Low Profile White Clicky Key Switches - 10 Pack (5:35) https://www.adafruit.com/product/5114?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Kailh Mechanical Key Switches - Thick Click Jade Box - 10 pack - Cherry MX Compatible (8:03) https://www.adafruit.com/product/5149?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Kailh Mechanical Key Switches - Clicky Navy Blue - 10 pack - Cherry MX Compatible (8:03) https://www.adafruit.com/product/5150?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Wi-Fi Add-on Board for Sony SPRESENSE iS110B (9:14) https://www.adafruit.com/product/5155?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Sensor Add-on Board for Sony Spresense EVK-701 (9:40) https://www.adafruit.com/product/5156?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 64x32 RGB LED Matrix - 2.5mm pitch (10:08) https://www.adafruit.com/product/5036?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Etched Glow-Through Keycap with Open Source Hardware Gear Logo - MX Compatible Switches (12:08) https://www.adafruit.com/product/5115?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts -------------------------------------- Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------
Stephano Cetola joins Jonathan Bennett and Doc Searls to discuss RISC-V. A Club TWiT member poses a question to Cetola about hold hardware potentially getting new life with RISC-V instructions written to it. It was a great chat on FLOSS Weekly. Full episode at twit.tv/floss636 Host: Jonathan Bennett Guest: Stephano Cetola You can find more about TWiT and subscribe to our podcasts at https://podcasts.twit.tv/
Stephano Cetola joins Jonathan Bennett and Doc Searls to discuss RISC-V. A Club TWiT member poses a question to Cetola about hold hardware potentially getting new life with RISC-V instructions written to it. It was a great chat on FLOSS Weekly. Full episode at twit.tv/floss636 Host: Jonathan Bennett Guest: Stephano Cetola You can find more about TWiT and subscribe to our podcasts at https://podcasts.twit.tv/
Director of Technical Programs at RISC-V's, Stephano Cetola joins FLOSS Weekly. The RISC-V Foundation was first to the table with an open-source ISA—Instruction Set Architecture—and every developer with a stake in the future is at that table, as participating members of RISC-V. And these are just two among the many interesting facts Doc Searls and Jonathan Bennett learned on this week's show from Cetola. If you care about the past and future of open hardware, nothing can be more important than what you'll hear in this hour of FLOSS Weekly. Hosts: Doc Searls and Jonathan Bennett Guest: Stephano Cetola Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
Director of Technical Programs at RISC-V's, Stephano Cetola joins FLOSS Weekly. The RISC-V International was first to the table with an open-source ISA—Instruction Set Architecture—and every developer with a stake in the future is at that table, as participating members of RISC-V. And these are just two among the many interesting facts Doc Searls and Jonathan Bennett learned on this week's show from Cetola. If you care about the past and future of open hardware, nothing can be more important than what you'll hear in this hour of FLOSS Weekly. Hosts: Doc Searls and Jonathan Bennett Guest: Stephano Cetola Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
Director of Technical Programs at RISC-V's, Stephano Cetola joins FLOSS Weekly. The RISC-V International was first to the table with an open-source ISA—Instruction Set Architecture—and every developer with a stake in the future is at that table, as participating members of RISC-V. And these are just two among the many interesting facts Doc Searls and Jonathan Bennett learned on this week's show from Cetola. If you care about the past and future of open hardware, nothing can be more important than what you'll hear in this hour of FLOSS Weekly. Hosts: Doc Searls and Jonathan Bennett Guest: Stephano Cetola Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
Director of Technical Programs at RISC-V's, Stephano Cetola joins FLOSS Weekly. The RISC-V Foundation was first to the table with an open-source ISA—Instruction Set Architecture—and every developer with a stake in the future is at that table, as participating members of RISC-V. And these are just two among the many interesting facts Doc Searls and Jonathan Bennett learned on this week's show from Cetola. If you care about the past and future of open hardware, nothing can be more important than what you'll hear in this hour of FLOSS Weekly. Hosts: Doc Searls and Jonathan Bennett Guest: Stephano Cetola Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
Director of Technical Programs at RISC-V's, Stephano Cetola joins FLOSS Weekly. The RISC-V International was first to the table with an open-source ISA—Instruction Set Architecture—and every developer with a stake in the future is at that table, as participating members of RISC-V. And these are just two among the many interesting facts Doc Searls and Jonathan Bennett learned on this week's show from Cetola. If you care about the past and future of open hardware, nothing can be more important than what you'll hear in this hour of FLOSS Weekly. Hosts: Doc Searls and Jonathan Bennett Guest: Stephano Cetola Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
Director of Technical Programs at RISC-V's, Stephano Cetola joins FLOSS Weekly. The RISC-V Foundation was first to the table with an open-source ISA—Instruction Set Architecture—and every developer with a stake in the future is at that table, as participating members of RISC-V. And these are just two among the many interesting facts Doc Searls and Jonathan Bennett learned on this week's show from Cetola. If you care about the past and future of open hardware, nothing can be more important than what you'll hear in this hour of FLOSS Weekly. Hosts: Doc Searls and Jonathan Bennett Guest: Stephano Cetola Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
Director of Technical Programs at RISC-V's, Stephano Cetola joins FLOSS Weekly. The RISC-V Foundation was first to the table with an open-source ISA—Instruction Set Architecture—and every developer with a stake in the future is at that table, as participating members of RISC-V. And these are just two among the many interesting facts Doc Searls and Jonathan Bennett learned on this week's show from Cetola. If you care about the past and future of open hardware, nothing can be more important than what you'll hear in this hour of FLOSS Weekly. Hosts: Doc Searls and Jonathan Bennett Guest: Stephano Cetola Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
Director of Technical Programs at RISC-V's, Stephano Cetola joins FLOSS Weekly. The RISC-V Foundation was first to the table with an open-source ISA—Instruction Set Architecture—and every developer with a stake in the future is at that table, as participating members of RISC-V. And these are just two among the many interesting facts Doc Searls and Jonathan Bennett learned on this week's show from Cetola. If you care about the past and future of open hardware, nothing can be more important than what you'll hear in this hour of FLOSS Weekly. Hosts: Doc Searls and Jonathan Bennett Guest: Stephano Cetola Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit
On this episode, I have a fun discussion with Scott Christianson. Scott is an Associate Teaching Professor of management at the Trulaske College of Business at the University of Missouri. Scott's interests are focused on the impact of emerging technology on society and human well-being. Prior to joining the college, he was a business owner with decades of experience in videoconferencing technology, project management, and information technology. “This is a great time to learn on your own.” – Scott Christianson Today on the Tech Leader Talk podcast: - How to start using open source hardware in your business - A student's project that used open source hardware to prototype a “calving collar” for cows - What Scott enjoys most about working in the academic world - New platforms for flexible learning (remote, in-person, and hybrid) Resources Mentioned: Arist (training platform): https://arist.co/ Scott's Newsletter: https://frtech.substack.com/welcome Instructables: https://www.instructables.com/ Arduino: https://www.arduino.cc/ Raspberrypi: https://www.raspberrypi.org/ Adafruit: https://www.adafruit.com/ SparkFun: https://www.sparkfun.com/ Connect with Scott: LinkedIn: https://www.linkedin.com/in/jscottchristianson/ Website: https://www.christiansonjs.com/ Thanks for listening! Be sure to get your free copy of Steve's latest book, Cracking the Patent Code, and discover his proven system for identifying and protecting your most valuable inventions. Get the book at https://stevesponseller.com/book.
Jason Kridner has 30 years of experience in the embedded systems industry. As a 28-year veteran of Texas Instruments DSP and processor businesses, founder of the BeagleBoard.org project, and invited speaker at numerous industry events, Jason knows what it takes to build an embedded system from concept to volume production.BUILD YOUR HARDWARE PROJECT WITH BEAGLEBOARDLearn more about the Beagleboard and kickstart your open source hardware journey!NEED TO BUILD A CUSTOM EMBEDDED SYSTEM? Whether you are a big business or a startup needing a custom embedded system hire the expert Jason Kridner to bring your hardware idea to life using Beagleboard computers.CONNECT WITH JASON KRIDNER:Connect with Jason Kridner on LinkedInConnect with Jason Kridner on Twitter
Ben Arc describes himself as an open source hobbyist. Yet in spite of his humble introduction, he built the open-source Bowser hardware wallet and is also one of the lead developers of LNBits – a useful Lightning Network tool.
Kat Scott of Open Robotics joins Chris to talk about how to create high complexity robotic creations and also how to create the lower level electronics that integrate into larger ROS systems. Kat is also a member of OSHWA, which defines and certifies Open Source Hardware.
Luke Leighton Luke Leighton is the Lead Dev and Project Coordinator for Libre-SOC LinkedIn: https://www.linkedin.com/in/lkclnet/ Twitter: https://twitter.com/lkcl LibreSOC: https://libre-soc.org Notes: https://www.crnhq.org/12-skill-summary/ https://aldacenter.org Credits: Music by ikson: https://www.iksonmusic.com Special Guest: Luke Kenneth Casson Leighton.
When discussing machine learning models “Black Box” is typically deployed as a helpful metaphor but from a hardware perspective the term is meant literally. How can we open the inside processors of a phone to verify that what’s inside is actually what we thought was inside? How does the minimalist aesthetic of consumer electronics create the illusion of technology as magic? Andrew "bunnie" Huang is a hacker, maker, and open hardware activist joining us on the WBI show to discuss these questions as well as share updates on Precursor. Alongside Edward Snowden, he worked on the Introspection Engine, a device allowing journalists to identify if and when their phones are transmitting or receiving information when it shouldn't be. Precursor is the development platform working to push out a new iteration of this device.Bunnie holds a Ph.D in Electrical Engineering from MIT and is the author of Hacking the Xbox. IG + Twitter: @WeBeImaginingSupport Us: On PatreonHost: J. Khadijah Abdurahman, Ilan MandelMusic: Drew LewisLinks for the Episode:Talking with Andrew "bunnie" Huang (AdaFruit)How ‘Hoverboards’ Epitomize Our Broken Patent SystemHalf A Million 'Hoverboards' Recalled Over Risk Of Fire, ExplosionsMoore's lawThe inverted Pendulum: A fundamental Benchmark in Control Theory and Robotics`GUNG HO` SOFTLY SATIRIZES AMERICAN FEATHERBEDDINGTechnology is Not Magic - bunnie Huang, Bitmark Ambassador #2An Alternative to the American way of Innovation TEDxPickeringStreetSynchronized violin players reveal uniqueness of human networksEdward Snowden designed an iPhone attachment that detects unwanted radio transmissions(@RealSexyCyborg) Thread on IMEs/Signal/Untrustability 'We found a wiretap' Lyubov Sobol's campaign team head released from custody with bugged cell phone nytlabs : Listening Table AKA MEDIA SYSTEMTrackMeNotAdNauseam - Clicking Ads So You Don't Have ToIntroducing Precursor « bunnie's blogPrecursor.dev
In the Bitcoin world, we say “Don’t Trust, Verify”. But do we do this with our hardware and hardware wallets? Andrew “bunnie” Huang is a hacker and open hardware activist, holding a PhD in Electrical Engineering. He joins me and Nicolas Dorier (as guest co host) to talk about his new project and how it could be used in the Bitcoin world, potentially as a fully open source bitcoin hardware wallet. Links: Website: Precursor.dev Twitter: @bunniestudios Twitter: @nicolasdorier Prior episodes with Nicolas: SLP48 Nicolas Dorier and BTCPayServer – self hosted Bitcoin and Lightning payments SLP172 Nicolas Dorier & Kukks – P2EP Comes To BTCPay Server Sponsors: Swan Bitcoin Knox Custody Hodl Hodl Unchained Capital (code LIVERA) CypherSafe (code LIVERA) Stephan Livera links: Show notes and website Follow me on twitter @stephanlivera Subscribe to the podcast Patreon @stephanlivera
Ten years ago, a community came together around a definition of open source hardware to be clear about what it means to share designs for physical things, and doing so in a way that allows others to make, modify, distribute or use those things. This definition has been managed by the Open Source Hardware Association (OSHWA). In this episode, I talk with Alicia Gibb, Executive Director of OSHWA and board president, Michael Weinberg about the growth of open source hardware, its certification process and the role of open source hardware in the maker response to COVID-19.
KidsLab - a podcast for parents and educators passionate about STEAM education
Today on the show, I am talking to Camilo Parra Palacio, the founder of Otto DIY - it’s all about 3D printable robot components and project kids to take your STEAM learning to new levels.Camilo is a Product Design Engineer and the Founder of Otto DIY. He’s a Designer by profession, roboticist and 3D printing enthusiast by passion. Born in Colombia a drive for adventure and pursuing his dreams took him to China in 2014, while working in Shanghai for a multinational inflatable toy manufacturer, he wondered upon the very first Hackerspace in China. There he started playing, learning and experimenting with DIY robots. At that time DIY robots were only accessible to professionals, and not well known to the general public. After coming up short with finding an easy to make robot for all ages, he realized what he needed to do. Bring to the market an open source robot that anyone can make. He bought a 3D printer and in a couple of months the iconic shape of Otto was made functional.Since then thousands of people started using Otto all around the world due to it’s simple Do-it-yourself home assembly attributes. Otto DIY is headquartered in Czech Republic, the center of Europe where the term robot and the best open source 3D printer was created. Thanks to Otto DIY open source nature, it has become one of the most popular 3D printable robot designs in the world. And by the way: Otto is the first-ever Open Source Hardware certificated project from the Czech Republic!
Welcome to our 10th episode of the podcast! Not only is this our 10th full episode, but we also have recently surpassed 1,000 episode downloads.As a thank you to all our listeners we're giving away $100 of credit to ten people that can be used on PCB assembly of any future CircuitHub order.Rules:Send us a tweet (or a LinkedIn post if you don't have Twitter) letting us know something that you've enjoyed or learned from the show so far.Make sure to mention both @CircuitHub and @WAssembly.The credit will be rewarded to the first ten posts.Credit can only be used towards assembly (not parts or bare boards).On this episode we talk to Joel Murphy, an electro-mechanical designer and fabricator with 15 years of hands-on experience in the design of products and small scale production tooling. He's also a huge advocate for the Open Source Hardware movement, founder of Flywheel Lab, OpenBCI and more!We had an awesome time chatting to Joel about how his work as a visual artist has enabled him to find a creative approach to problem solving in the electronics engineers and programming space that most engineers typically wouldn't think of.Show notes:Joel's background: He started out making jewelry and small metal objects and later moved into making kinetic sculptures.He started using different motivational forces for his sculptures including wind and gravity. Over time he started introducing more motorized things into his sculptures. His introduction into electronics began using relays to control different parts of the machine.He became a physical computing professor at Parson's School of Design in New York.We chat Joel's experience getting electronics made: Flywheel Labs Having the mindset of an artist rather than an engineer has helped him find workarounds to problems that people normally wouldn't even think of.World Famous Electronics - maker of the Pulse SensorJoel's advocacy of the Open Source Hardware movement: Being able to learn from open source designs has helped him become a better engineer.Relationship between patents and oshw - how they work in cooperation or oppositionJe credits OSHW to allowing him to get where he is in this fieldOpen BCI - Open source brain computer interface, open source EEG machineDisadvantages of OSHWJoel also recently contributed to the MIT E-vent emergency ventilator project. Regulations around building life saving devices.We go into importance of communicating with your manufacturer special considerations and expectations you may have - real people who want to do a great job are behind building your stuff.If you have questions about components call the distributor or part manufacturer directly, they wantPet peeves: Bad letter kerningFootprints drawn in reverse on datasheetsIf you'd like to get in contact with Joel or check out some of his work you can visit https://www.biomurph.com/Want to get in touch with us? Email us at contact@pickplacepodcast.com or tweet us @CircuitHub or @WAssembly.
Sara shares the story of a developer conference that was smoke bombed by an Arduino bot gone haywire. It was this chaos that inspired her to dig deeper into Arduino, which would eventually play a big role in helping her to found her company, Jewelbots. Paul unravels the mystery of what's really inside the Goonie Box: a timepiece, puzzle, and mechanical wonder that Guido uses to test his house guests. This week's lifeboat goes to Terminator17, who helped solve a problem around object detection using a Tensorflow-gpu.
Sara shares the story of a developer conference that was smoke bombed by an Arduino bot gone haywire. It was this chaos that inspired her to dig deeper into Arduino, which would eventually play a big role in helping her to found her company, Jewelbots. Paul unravels the mystery of what's really inside the Goonie Box: a timepiece, puzzle, and mechanical wonder that Guido uses to test his house guests. This week's lifeboat goes to Terminator17, who helped solve a problem around object detection using a Tensorflow-gpu.
Ruth Suehle Ruth is the Senior Community Outreach Manager at Red Hat. She was heavily involved in OpenSource.com, she is the author of Raspberry Pi Hacks along with co-author Tom Callaway, and she is part of the Red Hat CoLab Project. https://twitter.com/suehle https://www.linkedin.com/in/ruthsuehle/ https://fedoraproject.org/wiki/User:Rsuehle Notes: Ruth Suehle at Red Hat Summit talking about Colab: https://www.youtube.com/watch?v=gB6P983e2YQ Credits: Music by ikson: https://www.iksonmusic.com Special Guest: Ruth Suehle.
Hugh Blemings Hugh Blemings, the former Director of the Open Power Foundation, comes on the program to talk about his life and journey with technology. LinkedIn: https://www.linkedin.com/in/hugh-blemings/ Twitter: https://twitter.com/hughhalf OpenPower Foundation Board: https://openpowerfoundation.org/about-us/board-of-directors/ Notes: Credits: Music by ikson: https://www.iksonmusic.com Special Guest: Hugh Blemings.
Open Source Hardware is the FutureOpen Source Ecology is an open collaborative of builders, engineers, and producers. Join host Adrian Sinclair and Open Source founder Marcin Jakubowski, Ph.D, as they discuss about open source hardware, what are the challenges it faces, how can it be made just as visible as open source software, and why there is a need to shift the paradigm of the current economy from competitive to collaborative, among others. Open Source Ecology’s mission is to create a collaborative economic platform that optimizes development, production, and distribution – via open source collaboration – to accelerate innovation to unprecedented levels.The Adrian Sinclair Show focuses on real conversations with interesting people, exploration of interesting projects, topics, and ideas worth talking about. New episodes stream every Monday, Wednesday, Friday, and Sunday 7AM MT.---Apodcast.com - Listen, Learn, and Share. Stream original podcast shows on the NEXTGen podcasting platform for curious people and lifelong learners. If you are a life-long learner, an independent thinker and an explorer looking to broaden your horizons, learn something new, then you found your new home.--- Get an in-depth look at this topic on our blog: https://medium.com/@adrianwsinclair Click the follow button on the podcast page to get more content from us. Done with this episode? Binge stream our other episodes - there’s a lot of them! Subscribe to our YouTube channel: https://www.youtube.com/apodcastStream this podcast on Spotify: https://bit.ly/apodcastonspotifyJoin our Facebook group: https://www.facebook.com/groups/2266073637018886/Like our Facebook page: https://www.facebook.com/apodcastshow/Follow us on Instagram: https://www.instagram.com/adrianwsinclair/Got something for us? partnerships@apodcast.com
People never stop tinkering. Hardware hacking didn’t disappear after personal computers became mainstream. But it did change. A new generation of artists, designers, and activists are banding together to change the world—with open source hardware. Hardware hacking used to be expensive and time-consuming. Adaptable microcontrollers are making tinkering much easier. But even as the barriers to entry started falling, the practices around selling hardware have continued to veer toward secrecy. Ayah Bdeir, Alicia Gibb, and Limor Fried are working to keep hardware open. These leaders share how they helped build the open source hardware movement, and navigated fierce disagreements to make engineering accessible to all. If you want to read up on some of our research on open source hardware, you can check out all our bonus material over at redhat.com/commandlineheroes. You’ll find extra content for every episode. Follow along with the episode transcript.
Christina Cyr (dtoor), Lenore M. Edman (Evil Mad Scientist Laboratories), Nadya Peek (University of Washington), Carl Richell (System76), and Glenn Samala (SparkFun) join moderator Ayah Bdeir for a lively debate on the state of open source hardware at the 2020 Open Hardware Summit. More information about the Summit is available at 2020.oshwa.org.
This week, Aaron talks to Harris Kenney about his last year in running his own consulting company and the business of Open Source Hardware!----more----Intro music: "Organic to Synthetic" by Punch Deck. Check out his awesome work over on Spotify, Soundcloud, and YoutubeFind us on social: reddit, facebook, instagram, twitter
Proprietary technology that runs museum interactives—everything from buttons to proximity sensors—tends to be expensive to purchase and maintain. But Rianne Trujillo (http://www.riannetrujillo.com), lead developer of the Cultural Technology Development Lab (http://www.cctnewmexico.org/ctdl/) at New Mexico Highlands University (NMHU), realized that one way museums can avoid expensive, proprietary solutions to their technology needs is by choosing open source alternatives. She is part of the team behind Museduino (https://museduino.org), an open-source system for exhibits and installations. On this episode, Rianne Trujillo and fellow NMHU instructor of Software Systems Design Jonathan Lee (https://www.nmhu.edu/department-of-media-arts-technology/) describe the huge potential to applying the open source model to museum hardware. Topics and Links 00:00 Intro 00:15 Proprietary Technology in Museums 01:04 Rianne Trujillo (http://www.riannetrujillo.com) 01:24 The Cultural Technology Development Lab (http://www.cctnewmexico.org/ctdl/) 02:04 Museduino (https://museduino.org) 02:35 Jonathan Lee (https://www.nmhu.edu/department-of-media-arts-technology/) 02:50 Open Source Software and Hardware 04:09 Arduino 06:35 Hardware Lock-In 07:02 Where Museduino is Already Installed 07:24 Museduino Workshops 08:55 Archipelago At the Movies
Christian Friedrich im Gespräch mit Lars Zimmermann @bricktick zu Nachhaltigkeit, Bildung und Openness. Feedback und Kommentare gern an @HOOU_HAW auf twitter oder per Mail an team_hoou@haw-hamburg.de. Lars Zimmermann an der HBK Saar: www.hbksaar.de/personen/details/zimmermann Sammlung der Themen und Seiten: opencircularity.info/deutsch/ mifactori - Studio für Open Design und Umweltaktivismus: mifactori.de Eher Theorie: larszimmermann.de FFFS – Fixing Funding For Sustainability: larszimmermann.de/fffs-fixing-fund…ainability-main/ Das Mifactori Bildungsmanifest in seiner Rohfassung mifactori.de/bildungsmanifest/ Open Source Hardware: de.wikipedia.org/wiki/Open-Source-Hardware Ronen Kadushin, Open Design Manifesto: www.ronen-kadushin.com/open-design-manifesto Open Design: en.wikipedia.org/wiki/Open-design_movement Enzo Mari: de.wikipedia.org/wiki/Enzo_Mari Circular Economy: en.wikipedia.org/wiki/Circular_economy Palast der Projekte: mifactori.de/palast-der-projekte/ Camera Libre, Sam Muirhead: www.cameralibre.cc/ FFFS - Fixing Funding For Sustainability: larszimmermann.de/fffs-fixing-fund…ainability-main/ Mifactori Engel: mifactori.de/engel/ Libre Solar libre.solar/
Christian Friedrich im Gespräch mit Lars Zimmermann @bricktick zu Nachhaltigkeit, Bildung und Openness. Feedback und Kommentare gern an @HOOU_HAW auf twitter oder per Mail an team_hoou@haw-hamburg.de. Lars Zimmermann an der HBK Saar: https://www.hbksaar.de/personen/details/zimmermann Sammlung der Themen und Seiten: https://opencircularity.info/deutsch/ mifactori - Studio für Open Design und Umweltaktivismus: https://mifactori.de Eher Theorie: https://larszimmermann.de FFFS – Fixing Funding For Sustainability: https://larszimmermann.de/fffs-fixing-funding-for-sustainability-main/ Das Mifactori Bildungsmanifest in seiner Rohfassung https://mifactori.de/bildungsmanifest/ Open Source Hardware: https://de.wikipedia.org/wiki/Open-Source-Hardware Ronen Kadushin, Open Design Manifesto: https://www.ronen-kadushin.com/open-design-manifesto Open Design: https://en.wikipedia.org/wiki/Open-design_movement Enzo Mari: https://de.wikipedia.org/wiki/Enzo_Mari Circular Economy: https://en.wikipedia.org/wiki/Circular_economy Palast der Projekte: https://mifactori.de/palast-der-projekte/ Camera Libre, Sam Muirhead: https://www.cameralibre.cc/ FFFS - Fixing Funding For Sustainability: https://larszimmermann.de/fffs-fixing-funding-for-sustainability-main/ Mifactori Engel: https://mifactori.de/engel/ Libre Solar https://libre.solar/ Kapitelmarken: 00:10 Wer ist Lars Zimmermann 07:37 Digital, offen, nachhaltig? 11:32 Open Source Hardware & Open Design 14:43 Circular Design & Open Design 19:47 Palast der Projekte 27:02 Modularität 32:02 FFFS Fixing Funding for Sustainability 40:54 Mifactori Engel 42:50 Game Design für Nachhaltigkeitsbildung 45:36 Circular Design und Einkauf von Elektronik 49:03 Funding und Förderungen an Hochschulen 59:05 Outro
The #AI Eye: IBM (NYSE: $IBM) to Contribute Tech to Open-Source Hardware Community, Honeywell (NYSE: $HON) Announces New Suite of Solutions for Smart Buildings
The #AI Eye: IBM (NYSE: $IBM) to Contribute Tech to Open-Source Hardware Community, Honeywell (NYSE: $HON) Announces New Suite of Solutions for Smart Buildings
The #AI Eye: IBM (NYSE: $IBM) to Contribute Tech to Open-Source Hardware Community, Honeywell (NYSE: $HON) Announces New Suite of Solutions for Smart Buildings
The #AI Eye: IBM (NYSE: $IBM) to Contribute Tech to Open-Source Hardware Community, Honeywell (NYSE: $HON) Announces New Suite of Solutions for Smart Buildings
In this edition of Alpha Alloy podcast, Hari delves into the open source hardware community, how the landscape has evolved over the last decade, and talks about what the future holds with the current developments in Open Source Hardware. RISC V Instruction Set Architecture (ISA) is primarily taken as a test-bed to act as a yardstick on how the hardware community is navigating forward.
The RISC-V instruction set architecture (ISA) has garnered a lot of attention amongst academia and startups. But, being so new, there has been a limited amount of RISC-V IP that one would classify as "production-ready", and, of course, even less silicon.However, a new industry organization, the OpenHW Group, is looking to take open-source hardware technologies like RISC-V from prototypes to products. This week, Rick O'Connor, President of OpenHW Group and former Executive Director of the RISC-V Foundation, joins the Embedded Insiders to explain the relationship between the new consortium and other open-source initiatives. He also discusses how he believes that production-ready IP like CORE-V RISC-V cores will help accelerate the open-source hardware movement.
Vic Putz continues to carry a torch for the SpaceOrb, as do I, except he's actually doing something about it. Vic has been working on a new version called the Orbotron 9001 for the last few years that is an interface for the SpaceOrb to modern systems. Scott talks to Vic about their shared love of this 25 year old controller and why the world is missing out on the magic of 6 degrees of freedom. http://www.thingotron.com https://www.x360ce.com https://playoverload.com https://www.dxx-rebirth.com
Limor Fried is an engineer and creator of Adafruit Industries, a New York-based company that builds and sells open source hardware. Limor Fried, then a student at Massachusetts Institute of Technology, began selling electronic kits on her website from her own designs in 2005. She later moved to New York City to found Adafruit Industries. In 2010, Adafruit offered a US$1,000 (equivalent to $1,149 in 2018) reward for whoever could hack Microsoft’s Kinect to make its motion sensing capabilities available for use for other projects. This reward was increased to $2000 and then $3000 following Microsoft’s concerns about tampering. In 2013, the company had $22 million in revenue; for 2014 increased to $33 million.
Jimmy Song is a Bitcoin Core Contributor and former VP of Engineering for Armory. He caught the Bitcoin bug back in 2011 and started contributing to Bitcoin open source projects since 2013. He’s a contributor to CoinDesk and has a popular Bitcoin blog. He’s been teaching blockchain to engineers for over 3 years. Jimmy graduated from the University of Michigan with a Bachelors of Science in Mathematics.Seminar: http://programmingblockchain.com/ Newsletter: http://eepurl.com/cZr_Aj Medium: https://medium.com/@jimmysong Twitter: https://twitter.com/jimmysong Github: https://github.com/jimmysongFollow the best podcasts from the best minds in the Bitcoin and Cryptocurrency space on twitter.https://twitter.com/bitcoinpodcasts
Suz Hinton introduces us to the world of open source hardware. She shares interesting projects, both artistic and functional, and breaks down the steps it takes to create a hardware product. She also tells us what it's like to livestream her coding projects on her Twitch channel, and why she keeps doing it even though it can be scary and uncomfortable. Show Links Digital Ocean (sponsor) MongoDB (sponsor) Heroku (sponsor) TwilioQuest (sponsor) Arduino Raspberry Pi Adafruit Suz's Twitch channel Codeland Conf Codeland 2019
Det er godt at eje, men det er endnu bedre at dele. Det er der i hvert fald mange, der mener - især når det handler om software, hvor open source jo har været et kæmpe fænomen i mange tiår. Faktisk ligger selve internettet på servere, som overvejende kører open source software. Men i de senere år er der mange som også er begyndt at se på, om og hvordan man laver open source når det gælder fysiske ting og ikke “bare” digitale produkter. Christian Villum fra Dansk Design Center er gæst i denne episode for at fortælle meget om open source og ikke mindst om REMODEL-programmet på DDC, der er “et program for produktionsvirksomheder, der ønsker at udforske hvordan open source-principper kan udvikle nye økonomisk bæredygtige forretningsmodeller i produktionen af fysiske produkter – uden at miste konkurrenceevne.” Links Dansk Design Center REMODEL-programmet på DDC - firmaer lærer om open source hardware B&Os BeoCreate - open source-print skal få gamle højttalere op i nutiden Tips Anders: Ologies podcast med Alie Ward Jeppe: Claire L. Evans: Broad Band - bog om kvinderne der var med i udviklingen af internettet Adam: Tag landevejen (og lyt til podcast og lydbøger) næste gang du skal på road trip Christian Villum: Besøg BLOX - det nye design- og arkitekturcentrum i København (og meld dig evt. til deres inspirations-morgenmøder, BLOXHUB Mornings) Christian bonus-tip: Læs Sapiens af Yuval Noah Harari (Anders siger: Læs også efterfølgeren, Homo Deus!) PRAKTISK SAMDATA HK Podcasten sætter fokus på relevante it-faglige og it-politiske emner og nørder igennem på helt specifikke temaer. Formålet er at gøre lytterne klogere på hvad der sker i deres arbejdsliv her og nu og i fremtiden, og gå i dybden med problemstillinger fra it-professionelles hverdag. Redaktør på podcasten er it-faglig konsulent Jeppe Engell som sammen med Adam Bindslev og Anders Høeg Nissen er de faste værter på podcasten, der udkommer hvert 14. dag. Tak fordi du lytter med – får du lyst til at komme med ris og ros, kan du sende en e-mail til jeppe.engell@hk.dk og hvis du har tekniske spørgsmål eller kommentarer kan de sendes til anders@podlab.dk
Marco White talks about how he used open source hardware to create his own life-sized quadcopter!
Talk Python To Me - Python conversations for passionate developers
See the full show notes for this episode on the website at talkpython.fm/108.
SPEXcast sits down with the Co-Founder of STEMN.com, a social network for engineers to collaborate and work on engineering challenges for the future We also have new intro music courtesy of Nelson Scott. Check out his Soundcloud below! https://soundcloud.com/thenelsonscott
SPEXcast sits down with the Co-Founder of STEMN.com, a social network for engineers to collaborate and work on engineering challenges for the future We also have new intro music courtesy of Nelson Scott. Check out his Soundcloud below! http://soundcloud.com/thenelsonscott
Open Source is a development coming from the world of software and spreading nowadays to a lot of other areas - including hardware or physical objects in general. It is a methodology for collaboration. circular economy needs new forms of collaboration. If you put the definitions of Open Source and circular economy next to each other, you see that they overlap in many areas. In fact, it looks like Open Source could be the missing link for circular economy. And it might also look like, Open Source is the only or at least most promising way to a circular economy. Join this session to find out why. Lars Zimmermann, Economist: co founder OPENiT Agency (openitagency.eu) and Open Source Circular Economy Days (oscedays.org). Personal website larszimmermann.de Sam Muirhead, Activist & Consultant: Sam Muirhead (cameralibre.cc) promotes Open Source Hardware, Free Culture, Free Software and Open Data and develops methods and workflows to apply the open source concept to video and other areas outside of software. As part of the Open It Agency in Berlin, he develops strategies, workshops and solutions to help businesses and organisations go open source.
GFA056. Happy Tuesday morning Hong Kong, welcome to Global From Asia episode 56! It’s cooling off a tad bit as we’re getting into the Fall season, but nothing like my hometown of Hartford, Connecticut - autumn there had those trees changing all sorts of colors. The post China Open Source Hardware Maker Movement with Eric Pan appeared first on Global From Asia.
Introduction [1:04] Hackerspace Haze Mapping PHP Usergroup Special Episode with Matt Mullenwag Wordpress Rails Correlation Analysis Least Square open source hardware and software [7:56] Ubuntu Bash Firefox Apache Thunderbird xm OpenJDK Perl PHP PostgreSQL Arduino SparkCore vim Rails pry autojump tmux Virtualbox Archlinux Guake Yakuake Commit Strip on libraries SOAP SAVON I/O Polling audience questions [35:00] Linus Torvalds Richard Stallman Jimmy Wales RedHat Freemium Model PuppetLabs Software as a Service Canonical MariaDB Oracle SugarCRM Arduino 3D Printer Go Mozilla Netscape Docker Ansible Vagrant R php Queue nitrous.io nitrous.io open source Tesla Patents SCADA Stuxnet OpenStreetMaps setuid patent Mozilla newbie friendly bugs Picks [57:23] nanolinux brackets.io engineers.sg sparkcore ESP8266 Mumble WebRTC Web Bluetooth WG Event Loop - Local events [1:04:01] Singapore Ruby Meetup Rails Girls Singapore Singapore Wordpress Meetup Fun with Arduino & Sensors - BUILD FOSS Asia Geekcamp Singapore JSConf Asia DevFest Asia 2014 Robotx.org WeBuild.sg Electric Plug – Connect with Anna, Mic and Roland [1:09:21] Anna’s Website Anna’s Twitter Roland’s Website Michael’s Website Michael’s Twitter
Handies, Autos, Steaks, demnächst alles in Heimfertigung?