Hardware from the open-design movement
POPULARITY
Off-the-shelf didn't cut it, so we built what we needed using open hardware and open source.Sponsored By:Tailscale: Tailscale is a programmable networking software that is private and secure by default - get it free on up to 100 devices! 1Password Extended Access Management: 1Password Extended Access Management is a device trust solution for companies with Okta, and they ensure that if a device isn't trusted and secure, it can't log into your cloud apps. Unraid: A powerful, easy operating system for servers and storage. Maximize your hardware with unmatched flexibility. Support LINUX UnpluggedLinks:
L'interoperabilità è diventata un elemento cruciale nel panorama tecnologico moderno. Se fino a qualche decennio fa erano poche le aziende che potevano creare innovazione a 360 gradi imponendosi sul mercato con ecosistemi completi, oggi assistiamo a un proliferare di aziende specializzate in tecnologie specifiche che stanno diventando leader nei rispettivi settori. Questa evoluzione ha reso fondamentale la capacità di sistemi diversi di collaborare efficacemente, scambiandosi dati e informazioni in modo trasparente: trovare standard comuni è ormai imprescindibile. In questa puntata approfondiamo il tema dell'interoperabilità in vari ambiti: dall'hardware industriale e medico alla domotica, fino ai servizi software e alla Pubblica Amministrazione.Nella sezione delle notizie parliamo di Microsoft che ha reso WSL (Windows Subsystem for Linux) open source, del "Take It Down Act" firmato negli USA anche contro i deepfake e dei satelliti FireSat per il monitoraggio degli incendi boschivi.--Indice--00:00 - Introduzione01:00 - Microsoft rende WSL open source (HDBlog.it, Luca Martinelli)02:04 - In USA è stata firmata la legge federale contro i deepfake (TheGuardian.com, Davide Fasoli)03:19 - I satelliti FireSat per il monitoraggio degli incendi (Google Research, Matteo Gallo)04:55 - Un futuro interoperabile, dall'Industria 4.0 ai servizi per il cittadino (Luca Martinelli)17:01 - Conclusione--Testo--Leggi la trascrizione: https://www.dentrolatecnologia.it/S7E21#testo--Contatti--• www.dentrolatecnologia.it• Instagram (@dentrolatecnologia)• Telegram (@dentrolatecnologia)• YouTube (@dentrolatecnologia)• redazione@dentrolatecnologia.it--Immagini--• Foto copertina: Macrovector su Freepik--Brani--• Ecstasy by Rabbit Theft• Capsized by Tollef
We are excited to welcome Isaac Chute, an experienced software engineer with a background in embedded systems and a passion for open-source hardware. We'll delve into the world of RISC-V, an open-source instruction set architecture (ISA), and explore its integration with Fedora. Join us as we discuss the current state of Fedora on RISC-V, the challenges and opportunities in porting Fedora to this architecture, and the future prospects of RISC-V within the Fedora ecosystem. The Fedora Podcast features interviews and talks with the people who make the Fedora community awesome! These folks work on new technologies found in Fedora, produce the distro itself, or help put Fedora into the hands of users. There is so much going on in Fedora that it takes a whole podcast series!
What does it mean to license something in a way that works for you and your project? Does this fall under copyright or a patent? (The answer may surprise you!)The president of the Open Source Hardware Association, Thea Flowers, stopped by to school us on open hardware licensing, and it was much needed. We start by going over the scope of permissivity regarding licenses, beginning with the most open type of license available and progressing from there. There is a lot to unpack here, so get ready to get educated!Links for things mentioned in this episodechoosealicense.comTLDRLegalCC Friendly LawyersDo you have any questions, comments, or topic suggestions? Email us at podcast@opulo.io. We'd love to hear from you!To find out more about what we do, check out Opulo.ioTo see everything else we do, including social media, check out Opulo.start.pageO.H.M. Podcast Merch is now here!Intro song:Complicate Ya - Otis McDonald (Creative Commons Attribution License) Hosted on Acast. See acast.com/privacy for more information.
In this episode, we sit down with Thea Flowers, a huge advocate for open source who has done many things to be a beacon of light for others who believe in open source and open hardware as well.From running her own open-hardware synthesizer company to working at Google, Thea has contributed to many big projects and has even been a paid musician. She really has done it all. Oh, and did we mention she is the president of OSHWA? She is very impressive yet too humble to admit it. We hope you enjoy learning about Thea Flowers as much as we did!Thea's BlogDon't forget, Google Podcast is going away! We will not be on YouTube Music, so you may want to check out this link for other sources where you can listen to us.O.H.M. Podcast Merch is now here!Links to what we do and our social media can be found here: https://opulo.start.page/References in this episode:Robin Williams Commercial'Working in Public' by Nadia EghbalIntro song:Complicate Ya - Otis McDonald (Creative Commons Attribution License) Hosted on Acast. See acast.com/privacy for more information.
Agency Of Technology - Become A Hacker _______________________________________________________________________________________________________________________ Website / Donations / Support - https://closednetwork.io Thank You Patreons! - Michael Bates - Privacy Bad Ass Richard G. - Privacy Bad Ass Support / Patreon / Donations: https://closednetwork.io/support/ TOP LIGHTNING BOOSTERS !!!! THANK YOU !!! - Turquoise Panda -@bon -SircussMedia -@Pixeljones -whitecoat Join Our Matrix Channels! Main - https://matrix.to/#/#closedntwrk:matrix.org Off Topic - https://matrix.to/#/#closednetworkofftopic:matrix.org Join Our Mastodon server! (currently under migration) https://closednetwork.social ________________________________________________________________________________________________________________________ Top US Spies Meet With Privacy Experts Over Surveillance ‘Crown Jewel' https://www.wired.com/story/section-702-privacy-meeting/ Car Companies: Stop Your Huge Data Collection Programs - " Add your name to ask car companies to stop collecting, sharing and selling our very personal information. " https://foundation.mozilla.org/en/privacynotincluded/articles/car-companies-stop-your-huge-data-collection-programs-en/ T-Mobile users say other people's account information is appearing in their app https://www.theverge.com/2023/9/20/23881825/t-mobile-account-security-breach-customer-information-leak MULLVAD VPN We have successfully completed our migration to RAM-only VPN infrastructure https://mullvad.net/en/blog/2023/9/20/we-have-successfully-completed-our-migration-to-ram-only-vpn-infrastructure/ THREEMA USERS Threema for iOS: Chat on the Computer Without a Connection to the Smartphone https://threema.ch/en/blog/posts/ios-new-desktop-md Why self host? You're data can never be sold. You never know what "privacy" company you are relying on now decides to sell. Google has only got to the behemoth that they are because they have acquired business. Same with Apple. DEF CON 31 - An Audacious Plan to Halt the Internet's Ensh*ttification - Cory Doctorow The enshittification of the internet follows a predictable trajectory: first, platforms are good to their users; then they abuse their users to make things better for their business customers; finally, they abuse those business customers to claw back all the value for themselves. Then, they die. https://www.youtube.com/watch?v=rimtaSgGz_4 The Hacktivist, Award Winning Short Film Documentary: Celebrity hacker Andrew 'Bunnie' Huang first clashed with US tech giant Microsoft for teaching others how to modify the Xbox. Almost 20 years later, he is suing the US government to push for the right to use and own technology, all while creating hackable hardware with other tech superstars like whistleblower Edward Snowden and firmware hacker Sean Cross. Bunnie is convinced that, “If you can't hack what you have, you don't own it.” This documentary tinkers with the hacker's mind on issues around transparency and privacy in the hardware world, all while Bunnie dismantles his childhood, his philosophy, and his controversy. Precursor Mobile, Open Hardware, RISC-V System-on-Chip (SoC) Development Kit https://www.crowdsupply.com/sutajio-kosagi/precursor https://www.bunniestudios.com/blog/?p=5921 https://www.youtube.com/watch?v=KyYsVeYzbik Opening Sound Clip: - Lee Tien - Senior Staff Attorney - EFF (Electronic Frontier Foundation)
Ever wonder how a radically open-source company can be successful? What are the benefits, and what are the challenges? How do you manage version control, hiring, work instructions, and payroll? Opulo employees Stephen Hawes and Lucian Chapar cover the details of running an Open Hardware company, as well as interview anyone from hobbyists to CEOs that have experience in the field.Join the LumenPnP Discord Server and check out the #ohm-podcast channel: https://discordapp.com/invite/TCwy6De Hosted on Acast. See acast.com/privacy for more information.
Due to travel and other scheduling, we're debuting a brand new episode of the FOSS Pod in the feed this week. Hope you enjoy!Pine64 is one of the most ambitious open hardware projects around, delivering a wide range of low-cost and modifiable products including smart phones and watches, laptops, earbuds, soldering irons, and plenty more, all based on ARM and RISC-V. Senior advisor Lukasz Erecinski joins us on this episode to talk about the company's origins, letting your userbase weigh in on the hardware design process, running Linux on a phone, the promise of RISC-V, and a lot more.Support the Pod! Contribute to the Tech Pod Patreon and get access to our booming Discord, your name in the credits, and other great benefits! You can support the show at: https://patreon.com/techpod
Pine64 is one of the most ambitious open hardware projects around, delivering a wide range of low-cost and modifiable products including smart phones and watches, laptops, earbuds, soldering irons, and plenty more, all based on ARM and RISC-V. Senior advisor Lukasz Erecinski joins us on this episode to talk about the company's origins, letting your userbase weigh in on the hardware design process, running Linux on a phone, the promise of RISC-V, and a lot more.The FOSS Pod is brought to you by Google Open Source. Find out more at https://opensource.google
La documentation et les liens de cette émission sont sur http://cpu.pm/0204 . Cette release fait partie de la série “lost and found”. Dans cette release : Plein de rencontres sur Toulouse, la renaissance du THSF, l'Agile Tour en concert à Toulouse, le premier Faire Festival, et un agenda plein. Cette semaine, CPU est en mode lost + found et fait le tour de plusieurs événements…
Windrad, Textilrecycling, Wasseraufbereitung und Co.: In dieser Folge des Netzbastelns stellt uns Moritz Metz sechs Open-Hardware-Projekte vor, die von der Open Knowledge Foundation gefördert werden. Moritz hat in Berlin mit den Erfinder*innen der ausgewählten Projekte gesprochen. Wenn ihr das gerade lest, funktioniert das wegen Open Source – mindestens das halbe Internet basiert auf quelloffener Software, die oft von Ehrenamtlichen entwickelt und kostenlos weitergegeben wird. Aber es gibt auch Open Hardware – also Erfindungen , Objekte, Geräte, deren Teilelisten und Bauanleitungen der Allgemeinheit zur Verfügung stehen. So war zum Beispiel das selbstgeschweißte Netzbasteln-Lastenrad einer Open-Hardware-Anleitung entlehnt. Um mehr Open-Hardware-Dokumentationen für die Zivilgesellschaft zu fördern, hat die "Open Knowledge Foundation" einen Ideenwettbewerb ausgerufen – und eine zwölfköpfige, ehrenamtliche Jury, der auch Netzbastler Moritz Metz angehörte, hat beschlossen, sechs Open-Hardware-Projekte zu fördern. In Berlin wurden diese bemerkenswerten Bauwerke kürzlich vorgestellt – und Moritz hat mit deren Erfinder*innen gesprochen. 1: Die Textilrecycling-Maschine von Natalija und Sara kann Gestricktes zurück in Vlies und damit Garn umwandeln. 2: Das Windkit soll pro Jahr Strom für 200 Waschmaschinenladungen erzeugen. 3: LibreWater will Meerwasser entsalzen und zu Trinkwasser machen - mit Solarenergie. 4: Das mobile Heißdampfsystem will Küchenkollektiven (zum Beispiel auf Festivals oder Camps) helfen, Geschirr schnell und portabel keimfrei zu bekommen. 5: Das OpenMycoLab will einen sterilen Reinraum in einem ausrangierten Kühlcontainer schaffen - zur Pilzzucht, aber auch als mobiles Labor in Krisengebieten. 6: Laser4DIY ist ein professionell entwickelter Open-Source-Lasercutter für Elektronik-Platinen.
John Leavitt, Senior Industrial Designer at Intelligent Product Solutions, joins Timothy Keirnan for a conversation about industrial design, using two firefighting products as a starting point. Besides the two case studies, we talk about general design process and philosophies, methods, education recommendations, and our ambitions for a world in which UX includes respect for users' privacy and security as a selling point. 00:00 Introduction 03:30 Design Process 08:06 Self Contained Breathing Apparatus case study 19:45 Fire Truck Inventory Feature case study 36:45 How does John recommend people learn industrial design and nurture their careers 40:30 Our dream of UX for any product having a main feature of protecting the user's/customer's privacy and security by default 48:50 John's favorite design resources Purism is one company that is making privacy and security of both software and hardware a primary selling point of their product designs. John's employer is at https://intelligentproduct.solutions/ John's contact info is https://www.linkedin.com/in/jleavit/
Jason Griffey of NISO is the guest this week on FLOSS Weekly. Aaron Newcomb and Doc Searls talk with Griffey about all the lessons we should all be learning from the successes, failures and future implications of his LibraryBox project. A great discussion on standards, open hardware and privacy. Hosts: Doc Searls and Aaron Newcomb Guest: Jason Griffey Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit Sponsors: kolide.com/floss Code Comments
Jason Griffey of NISO is the guest this week on FLOSS Weekly. Aaron Newcomb and Doc Searls talk with Griffey about all the lessons we should all be learning from the successes, failures and future implications of his LibraryBox project. A great discussion on standards, open hardware and privacy. Hosts: Doc Searls and Aaron Newcomb Guest: Jason Griffey Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit Sponsors: kolide.com/floss Code Comments
Jason Griffey of NISO is the guest this week on FLOSS Weekly. Aaron Newcomb and Doc Searls talk with Griffey about all the lessons we should all be learning from the successes, failures and future implications of his LibraryBox project. A great discussion on standards, open hardware and privacy. Hosts: Doc Searls and Aaron Newcomb Guest: Jason Griffey Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit Sponsors: kolide.com/floss Code Comments
Jason Griffey of NISO is the guest this week on FLOSS Weekly. Aaron Newcomb and Doc Searls talk with Griffey about all the lessons we should all be learning from the successes, failures and future implications of his LibraryBox project. A great discussion on standards, open hardware and privacy. Hosts: Doc Searls and Aaron Newcomb Guest: Jason Griffey Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit Sponsors: kolide.com/floss Code Comments
Today we'll be talking with Ari Juels. Juels is Co-Director of the Initiative for CryptoCurrencies and Contracts (IC3). He is also Chief Scientist at Chainlink Labs and a Professor in the Jacobs Technion-Cornell Institute at Cornell Tech. We'll be talking about his work and what motivates him.You can watch this interview on YouTube .You Can Find Hashing It Out Podcast Here:Website: https://hashingitout.sounder.fm/RSSFeed:https://feeds.sounder.fm/6234/rss.xml
In this episode of The G2 on 5G, Anshel and Will Cover:1. Mavenir lays off half of its marketing staff & secures public credit facilities - is there trouble in Open RAN land?2. Motorola Edge 5G phone launches with MediaTek's Dimensity 1050 which for the first time brings mmWave support to a MediaTek-based device, MediaTek also announced the T830 which is squarely aimed at enabling FWA CPEs and portable Wi-Fi 7 hotspots.3. Mediatek successfully powers a smartphone with a 5G non-terrestrial network in a lab environment- what could it mean for connectivity and Omnispace & AST Spacemobile deployments? 4. Omnispace wants to compete with AST Spacemobile to deliver satellite connectivity to smartphone using a standards-based approach, building its technology around the 3GPP's Rel. 17 NTN standards. Has 2 satellites launched, $140M raised and announced a partnership with the Philippines' operator Smart.5. AT&T plans to have half of its traffic running on white box switches and open hardware by the end of the year - what's the significance for its 5G deployment plans?6. The 2.5 GHz auction is nearing its end at $347 million after 41 rounds of bidding with only 300 of the 8000 available licenses still up for contention in round 42 of bidding
Stephano Cetola, Director of Technical Programs for RISC-V International, returns to bring Doc Searls and Jonathan Bennett up to speed on the many new developments in and around RISC-V's radically open and promising CPU architecture. Hosts: Doc Searls and Jonathan Bennett Guest: Stephano Cetola Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit Sponsor: kolide.com/floss
Stephano Cetola, Director of Technical Programs for RISC-V International, returns to bring Doc Searls and Jonathan Bennett up to speed on the many new developments in and around RISC-V's radically open and promising CPU architecture. Hosts: Doc Searls and Jonathan Bennett Guest: Stephano Cetola Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit Sponsor: kolide.com/floss
Stephano Cetola, Director of Technical Programs for RISC-V International, returns to bring Doc Searls and Jonathan Bennett up to speed on the many new developments in and around RISC-V's radically open and promising CPU architecture. Hosts: Doc Searls and Jonathan Bennett Guest: Stephano Cetola Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit Sponsor: kolide.com/floss
Stephano Cetola, Director of Technical Programs for RISC-V International, returns to bring Doc Searls and Jonathan Bennett up to speed on the many new developments in and around RISC-V's radically open and promising CPU architecture. Hosts: Doc Searls and Jonathan Bennett Guest: Stephano Cetola Download or subscribe to this show at https://twit.tv/shows/floss-weekly Think your open source project should be on FLOSS Weekly? Email floss@twit.tv. Thanks to Lullabot's Jeff Robbins, web designer and musician, for our theme music. Get episodes ad-free with Club TWiT at https://twit.tv/clubtwit Sponsor: kolide.com/floss
Why Google says we should all go rolling, Red Hat's got a new boss, Microsoft gets called out, and why it might be the year of Linux hardware.
Why Google says we should all go rolling, Red Hat's got a new boss, Microsoft gets called out, and why it might be the year of Linux hardware.
Diesmal sprechen wir über den plötzlichen Drang der Behörden hin zu Freier Software und deren Schönrechnerei der Erfolge, einer Google-AI mit angeblichem Bewusstsein und einem bizarren Patentfall rund um Open Hardware.
This week's Electromaker Show is now available on YouTube and everywhere you get your podcasts! Welcome to the Electromaker Show episode 80! This week we look at machine learning running on an Arduino Uno, a new kind of vision sensor, and Framework's plan for old laptop mainboards. Tune in for the latest maker, tech, DIY, IoT, embedded, and crowdfunding news stories from the week. Watch the show! We publish a new show every week. Subscribe here: https://www.youtube.com/channel/UCiMO2NHYWNiVTzyGsPYn4DA?sub_confirmation=1 We stock the latest products from Adafruit, Seeed Studio, Pimoroni, Sparkfun, and many more! Browse our shop: https://www.electromaker.io/shop Join us on Discord! https://discord.com/invite/w8d7mkCkxj Follow us on Twitter: https://twitter.com/ElectromakerIO Like us on Facebook: https://www.facebook.com/electromaker.io/ Follow us on Instagram: https://www.instagram.com/electromaker_io/ Featured in this show: Vilima's Minority Report Kitchen Timer NXP Cup Video Updates TinyML on an Arduino UNO Mini Billiards Game Bean Counter USB to TTL Kickstarter Metavision Vision Sensor Framework providing tools to stop E-Waste Seeed testing LoRaWan
Pop_OS! 22.04 has a surprise you might not have noticed, we get the details on Ubuntu's new Real-Time kernel, and the clever idea from the Framework laptop team.
Pop_OS! 22.04 has a surprise you might not have noticed, we get the details on Ubuntu's new Real-Time kernel, and the clever idea from the Framework laptop team.
Access 2 Perspectives – Conversations. All about Open Science Communication
Jo Havemann talked with Julieta Arancio, Alex Kutschera, and André Maia Chagas about their mentorship program for Open Hardware projects. Hear their answers to questions such as: What is Open Hardware? How is Open Hardware used and applied in a research context? What other applications exist for open hardware and who is the mentoring program designed for? How did the program evolve to its current form? Why is mentoring necessary/useful for hardware projects? References Arancio, Julieta, and Shannon Dosemagen. “Bringing Open Source to the Global Lab Bench.” Issues in Science and Technology 38, no. 2 (2022): 18–20. issues.org/open-source-science-hardware-gosh-arancio-dosemagen/ Maia Chagas A, Molloy JC, Prieto-Godino LL, Baden T (2020) Leveraging open hardware to alleviate the burden of COVID-19 on global health systems. PLoS Biol 18(4): e3000730. doi.org/10.1371/journal.pbio.3000730 Maia Chagas A (2018) Haves and have nots must find a better way: The case for open scientific hardware. PLoS Biol 16(9): e3000014. doi.org/10.1371/journal.pbio.3000014 Find out more at access2perspectives.org/2022/02/open-hardware-makers/. With the Access 2 Perspectives approach, we help you open up your research in a feasible way and in accordance with state-of-the-art good scientific practices and a digitalised research environment. | Website: access2perspectives.org --- Send in a voice message: https://anchor.fm/access2perspectives/message
Dan Gilbert of Tall Dog joins us to talk about the Tiny Nostalgia Evocation Square (or TinyNES for short)! The TinyNES is an open hardware system compatible with the compatible with original Nintendo Entertainment System and Famicom cartridges and controllers. Instead of being just an emulator or FPGA-based implementation, the TinyNES uses the original 6502-derived chips and a custom circuit board, preserving and carrying forward computing history! Oh yeah, and it's also running a crowdfunding campaign, so you can order your own and support open hardware in the best way possible: by playing video games!By the way, we mentioned that FOSS & Crafts Studios would be launching its first collaboration... we're helping to run the crowdfunding campaign on this one (and couldn't be more excited about it)!Links:TinyNES crowdfunding campaign (launch announcement, sources will be on tinynes.com when campaign succeeds)Tall Dog, Dan's company (they do some other cool open hardware stuff too, check 'em out!)Tall Dog's statement on supporting open sourceThe 6502 chip and its specially modified version for the Nintendo Enetertainment System, the Ricoh 2A03FreeCAD and KiCADVisual6502Nova the SquirrelEverdrive (proprietary hardware, but lets you run custom ROMs, including Nova)Robot Finds Kitten on the c64! Written in Racket!
Kim McMahon Kim is the Director of Visibility & Community Engagement at RISC-V International and a Co-Chair of the Open Hardware Diversity Alliance. LinkedIn: https://www.linkedin.com/in/kimmcmahonco/ Notes: RISC-V: https://www.linkedin.com/company/risc-v-international/ OHDA: https://diversityhw.org Credits: Music by ikson: https://www.iksonmusic.com
Timothy Pearson Timothy Pearson is the Chief Technology Officer of Raptor Computing Systems https://raptorcs.com/TALOSII/ https://twitter.com/RaptorEng Notes: Credits: Music by ikson: https://www.iksonmusic.com Special Guest: Timothy Pearson.
High-spec microscope is helping malaria diagnosis in Tanzania
We talk to Jose Urra Llanusa and Santosh Ilamparuthi, founders of the open hardware community at Delft Technical University, on promises and pitfalls of open hardware, and how to scale up good quality devices. Show notes: + [Guide to preprints](https://zenodo.org/record/5600535) + [Book launch "Open Science, the Very Idea"](https://www.uu.nl/nieuws/onbeschaamd-activistisch-een-nieuw-boek-over-open-science) + [NWO Open Science fund](https://www.nwo.nl/onderzoeksprogrammas/open-science/open-science-fund) + [OSCU symposium, faculty of Science](https://osf.io/rfzy6/)
On this episode of DLN Xtend we discuss the big news from Pine64. Welcome to episode 79 of DLN Xtend. DLN Xtend is a community powered podcast. We take conversations from the DLN Community from places like the DLN Discourse Forums, Telegram group, Discord server and more. We also take topics from other shows around the network to give our takes. 00:00 Introduction 06:30 Topic - Pine64 PinePhone Pro 33:20 Host Related Interest 39:49 Wrap Up Main Topic Link - https://youtu.be/itP1DWkIp0o Wendy - Unbound: Worlds Apart - https://store.steampowered.com/app/814680/UnboundWorldsApart/ Contact info Matt (Twitter @MattDLN) Wendy (Mastodon @WendyDLN) Nate (Website CubicleNate.com)
In this episode of HardwareX podcasts, we talk to Andrew Hill and Peter Prince from Open Acoustic Devices, which is a UK-based company that designs, supports and deploys open-source acoustic hardware and software for our user community, as well as our own environmental and wildlife monitoring projects. In October 2019, their team published a paper in HardwareX titled “AudioMoth: A low-cost acoustic device for monitoring biodiversity and the environment”. The paper is part of the Special Issue on Open-Hardware for Environmental Sensing and Instruments edited by Chet Udell and Shannon Hicks. Their product, AudioMoth is a low-cost, full-spectrum acoustic logger that can listen at audible frequencies, well into ultrasonic frequencies. This podcast episode was recorded, edited, and produced by Santosh Pandey from Iowa State University. The music is provided by JuliusH from Pixabay (Title: Spirit Of Autumn - Ambient Chill Out Music for Fall).
Our guest, Jason Kridner, Co-founder of BeagleBoard, joins us to discuss overcoming supply chain issues and artificial barriers to technology, the future of open, modular hardware, and how technology should empower (and not limit) humanity. Hosted by Alexandros Marinos, Founder and CEO of balena. Interesting links: BeagleBoard https://beagleboard.org/bone Project Ara https://en.wikipedia.org/wiki/Project_Ara Pocket Beagle https://beagleboard.org/pocket Mikrobus https://www.mikroe.com/mikrobus Maemo https://en.wikipedia.org/wiki/Maemo Donkey Car https://www.donkeycar.com/ Watch the recorded episode here. Check out our YouTube channel for other full episode videos and clips. --- Send in a voice message: https://anchor.fm/balenaio/message
Austin Griffith is a prolific developer who works with the Ethereum Foundation to not only build new decentralized technology, but also teach others how to do the same. He also leads the BuidlGuidl, which is a curated group of Ethereum builders creating products, prototypes, and tutorials with scaffold-eth. Check him out at: Social Media of Austin Griffith Twitter: https://twitter.com/austingriffith Website: https://austingriffith.com/ Scaffold-eth: https://github.com/austintgriffith/sc... Social Media of BuidlGuidl BuidlGuidl: https://buidlguidl.com/
What's coming next for the Linux desktop, and some exclusive news from System76. Plus, we try out Element's new voice messages and share our thoughts.
What's coming next for the Linux desktop, and some exclusive news from System76. Plus, we try out Element's new voice messages and share our thoughts.
What's coming next for the Linux desktop, and some exclusive news from System76. Plus, we try out Element's new voice messages and share our thoughts.
Peggy and David Patterson, pardee professor of computer science, Emeritus, University of California at Berkeley, talk about RISC and how it brings openness to hardware design. He says in the beginning ease of use was the top priority with technology, and now we are paying the price with security. They also discuss: Why testing can reveal the presence of bugs but can't reveal the absence of bugs. How RISC lets someone do security themselves. How to inspire the next generation. berkeley.edu (06.22.21 - #725) IoT, Internet of Things, Peggy Smedley, artificial intelligence, machine learning, big data, digital transformation, cybersecurity, blockchain, 5G cloud, sustainability, future of work, podcast
Peggy and David Patterson, pardee professor of computer science, Emeritus, University of California at Berkeley, talk about RISC and how it brings openness to hardware design. He says in the beginning ease of use was the top priority with technology, and now we are paying the price with security. They also discuss: Why testing can reveal the presence of bugs but can't reveal the absence of bugs. How RISC lets someone do security themselves. How to inspire the next generation. berkeley.edu (06.22.21 - #725) IoT, Internet of Things, Peggy Smedley, artificial intelligence, machine learning, big data, digital transformation, cybersecurity, blockchain, 5G cloud, sustainability, future of work, podcast
We discuss old and new ways to manage, organize, index, and search your photo collection. It's our favorite Google Photo's alternatives. Plus Chris' hands-on review of System76's customizable Launch keyboard. Special Guests: Alex Kretzschmar and Brent Gervais.
Season 3 Episode 8 Episode 80 News: https://huguesjohnson.com/programming/java/BinToWav/ Rare's Unreleased N64 Game That Became Star Fox Adventures Leaks Online Another arcade is closing in Tokyo. RetroArch’s Open Hardware project aims to make using real cartridges on emulators easy Hacker Rewrites Crappy SNES Racer To Improve Its Framerate Sevenfold There's Been An N64 Mini-Game Hidden Inside The Switch Version Of Firewatch All This Time The Lost Vikings, Rock N' Roll Racing, And Blackthorne Return In The Blizzard Arcade Collection Rock N' Roll Racing Music Might Get Twitch Streamers In Trouble New Mortal Kombat Cabinet Coming From Arcade1Up (R note- Toobin’ is one of my favs. Will prob pick for game club this spring) Frogger is coming to the Peacock streaming service as a game show Building a new NES in 2021! Opentendo build guide and demonstration SDCard interface for the Commodore Amiga Building a SMS/ Mark-III game cartridge reader Random Analogue Segment Analogue says it’s making more Pockets — and going after bots and resellers Super Nt: Firmware Update v5.0 Mega Sg: Firmware Update v4.8 Game Club Discussion: Twinkle Star Sprites Side Pocket New Game Club Games: Star Fox Frogger Music (when we don’t use game music) By: I Love Lightning Bugs Game Club Master List
Microsoft and Ubuntu's relationship is under a new spotlight this week. Plus our rundown of the feature-packed 5.11 release, a Fuchsia surprise, exciting hardware news, and more.
Microsoft and Ubuntu's relationship is under a new spotlight this week. Plus our rundown of the feature-packed 5.11 release, a Fuchsia surprise, exciting hardware news, and more.
Microsoft and Ubuntu's relationship is under a new spotlight this week. Plus our rundown of the feature-packed 5.11 release, a Fuchsia surprise, exciting hardware news, and more.
In questa puntata parliamo un po' di questi dispositivi molto cari agli amanti dell'elettronica e dell'informatica. Cosa sono? Come possiamo divertirci ed imparare ad usarli? Scopritelo con noi e fateci le vostre osservazioni sul gruppo telegram @librepodcast
Interactive discussion about the future of hardware for cloud and edge use cases. We discuss open source hardware, impact of ARM, innovation cycles for data center technologies. Photo Credit: https://www.pexels.com/@tima-miroshnichenko
Thema https://www.raspberrypi.org/ https://myscope.net/airpi-wetterstation-mit-raspberry-pi/ https://de.wikipedia.org/wiki/Arduino_(Plattform) Kurzgesagt Vor 50 Jahren: Das Patent für LCD wird angemeldet https://www.heise.de/hintergrund/Vor-50-Jahren-Das-Patent-fuer-LCD-wird-angemeldet-4980588.html 25 Jahre JavaScript https://www.heise.de/news/Den-Kinderschuhen-entwachsen-25-Jahre-JavaScript-4981124.html Brexit-Vertrag: Netscape Navigator https://blog.fefe.de/?ts=a11312dd Lücken in FOSS-Produkten bleiben unentdeckt https://www.heise.de/news/GitHub-Report-Schwachstellen-in-Open-Source-bleiben-jahrelang-unentdeckt-4980891.html IKEA und Open Source https://www.golem.de/news/smart-home-ikea-plant-open-source-abteilung-2012-153099.html 8 Millionen Dollar für Arecibo https://www.engadget.com/puerto-rico-approves-8-million-to-rebuild-arecibo-telescope-155454170.html Apple Car https://www.heise.de/news/Apple-Car-angeblich-fuer-2024-geplant-4997483.html Schufa will Konten auswerten https://netzpolitik.org/2020/schufa-will-kontodaten-auswerten/ Extras How Mission Control's Big Displays Worked: https://www.youtube.com/watch?v=N2v4kH_PsN8 --- Send in a voice message: https://anchor.fm/opensourcecouch/message
After another short break due to Stefan becoming a father, both talk about recent projects involving 3D scanners & sublimating 3D scanning spray. News cover KFC planning to print with lab meat in Russia, 3D printing gunpowder, a Standard for Open Hardware and Open Source Computer Vision Algorithms for print correction. Due to recent events, both rant about an allegedly "fully" 3D printed motorcycle, 3D printed houses, and how Kickstarters rarely are used anymore for what they should. Questions cover, exotic material printing, printing services, and testing out your designs for different printing technologies.
Elen from Fully Automated Technologies joins Chris to talk about building high current battery controllers. She also describes an exciting new site called EDeA, for offering circuit schematic and layout blocks in KiCad. That site will allow users to pull in open source, proven design blocks to their designs. All electronics designed at Fully Automated Technologies is open source.
L'Open Source ha un ruolo nella lotta al virus.Open e sicurezza -> https://www.avvocatomasi.com/post/immuni-open-source-e-sicurezzaCosetta Masi ci racconta come si passa dal Foss all'Open Hardware Licence.
TIK TEK TOE, episode 009. In this final episode of the decade, or at least, this year, Marcel and Evan riff on Christmas gifts, VR games, Jumanji, Open Hardware vs closed borders, The Witcher, and several other diversions. Somewhere in there, they reminisce over the last decade of free software, a free and open Internet (the Overnet), and lots of other things you really don't want to miss. Oh, and Marcel learns about Gwen Stacy, or is it Gaven and Stacey? Once you're done listening, or right now for that matter, please (pretty please, even) make sure you share this podcast with your friends, family, neighbours, enemies . . . just share and recommend. Also, if you can spare a few extra keystrokes, be sure to leave us a comment and tell us how we're doing. Additonal Notes & Links from the Show Pearls and Swine for the New Year Oculus GO, Quest, and VR Daedalus Video play of Daedalus in VR Land's End Wander for Oculus RISCV goes to Switzerland Jumanji: Welcome to the Jungle Jumanji : The Next Level The Witcher on Netflix Oh, and Gavin and Stacey's Christmas special. --- Send in a voice message: https://anchor.fm/tic-tek-toe/message
Tom Baden's work into the neuroscience of vision has earned him the inaugural Nature Research Award for Driving Global Impact.Tom Baden, professor of neuroscience at the University of Sussex, UK, is the first winner of an award to recognise early career researchers whose work has made, or has the potential to make, a positive impact on society.Baden's research on zebrafish and mice showed that eyes have vastly greater computational powers than people previously thought, rather than being faithful recorders of the real world.The judges of the award, run in partnership with Chinese technology company Tencent, said Baden's research could have a significant impact on both diagnostic and therapeutic ophthalmology research.In addition to his research, Baden tells Julie Gould about his interest in open hardware and 3D printing and its potential to make well equipped labs more affordable for developing countries.Baden is also cofounder of Teaching and Research in Neuroscience for Development (TReND) in Africa. This nonprofit, which launched in 2010, runs research courses in sub-Saharan Africa and helps to place scientists who’d like to teach there into the region’s universities.The group also collects unused lab equipment from facilities in the United States and Europe and redistributes it to laboratories across Africa. See acast.com/privacy for privacy and opt-out information.
#opensource #oshw #ohm2019 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------
Au programme : le lecteur multimédia libre VLC; le projet Wikidata (relier tous les savoirs du monde); transcriptions sur les Communs numériques Émission Références Transcription Contact Libre à vous !, l'émission pour comprendre et agir avec l'April, chaque mardi de 15h30 à 17h sur la radio Cause commune (93.1 FM en Île-de-France et sur Internet). Au programme de la quarantième-deuxième émission : chronique de Marie-Odile Morandi, animatrice du groupe Transcription, sur les Communs numériques notre sujet principal portait sur le lecteur multimédia libre VLC. Notre invité : Jean-Baptiste Kempf, président de VideoLAN, l'association qui gère VLC et fondateur de la société Videolabs qui crée des services autour de VLC et, plus généralement, des nouveautés autour de la vidéo. chronique de Jean-Christophe Becquet, président de l'April, sur Wikidata (relier tous les savoirs du monde) diverses annonces clins d'œil et références à l'œuvre de Douglas Adams Le Guide du voyageur galactique Réécouter en ligne Votre navigateur ne supporte pas l'élément audio : écoutez l'émission (format OGG) ou format MP3. podcast OGG et podcast MP3 S'abonner au podcast Podcasts des différents sujets abordés Chronique « Les transcriptions qui redonnent le goût de la lecture » de Marie-Odile Morandi, animatrice du groupe Transcription, sur les Communs numériques (format OGG) (et format MP3) (12 minutes 6 secondes) VLC, son association, la société Videolabs et les nouveautés autour de la vidéo avec avec Jean-Baptiste Kempf (format OGG) (et format MP3) (46 minutes 56 secondes) Chronique « Pépites libres » de Jean-Christophe Becquet, président de l'April, Wikidata relier tous les savoirs du monde (format OGG) (et format MP3) (12 minutes 45 secondes) Annonces (format OGG) (et format MP3) (4 minutes 3 secondes) N'hésitez pas à nous faire des retours sur le contenu de nos émissions pour indiquer ce qui vous a plu mais aussi les points d'amélioration. Vous pouvez nous contacter par courriel, sur le webchat dédié à l'émission (mais nous n'y sommes pas forcément tout le temps) ou encore sur notre salon IRC (accès par webchat). toc_collapse=0; Sommaire Personnes participantes Galerie photos Références pour la partie consacrée aux transcriptions sur les Communs numériques Références pour la partie consacrée à VLC Références pour la chronique sur Wikidata Références pour la partie sur les annonces diverses Références et clins d'œil au Guide du voyageur galactique Pauses musicales Personnes participantes Les personnes qui ont participé à l'émission : Frédéric Couchet, délégué général de l'April Jean-Baptiste Kempf, président de VideoLAN, l'association qui gère VLC et fondateur de la société Videolabs Jean-Christophe Becquet, président de l'April Marie-Odile Morandi, animatrice du groupe Transcriptions Galerie photos Vous pouvez voir quelques photos prises pendant l'émission. Références pour la partie consacrée aux transcriptions sur les Communs numériques Le Vinvinteur n°13 - La dictature du copyright Contenus numériques : droit d'auteur et licences libres - Lionel Maurel Creative Commons. Où en est-on en 2017 ? Lionel Maurel Que manque-t-il pour avoir des licences Open Hardware qui fonctionnent - Calimaq Faire atterrir les Communs numériques - Lionel Maurel - Cerisy Références pour la partie consacrée à VLC VLC Références pour la chronique sur Wikidata Wikidata Les projets de la Fondation Wikimedia Le septième anniversaire de Wikidata L'interface de requête de Wikidata Plein d'exemples de requêtes Un bon tutoriel pour débuter avec le langage de requête SPARQL La licence Creative Commons Zéro Une requête Wikidata : quels sont les éléments qui ont la valeur 42 pour une de leurs propriétés ? April (Q2858967) sur Wikidata Monumental : un logiciel libre qui recherche des informations sur les monuments classés autour d'un point en se basant sur Wikidata, Wikipedia and Wikimedia Commons Mieux protéger les espèces menacées avec Wikidata : une initiative du Ministère de l’Europe et des Affaires étrangères avec Open Knowledge France Les salles de spectacles et Wikidata, en quelques déclarations : résultat d'une recherche publiée par l'Initiative canadienne Un avenir numérique lié en 2019 Une nouvelle vidéo de la Conférence gesticulée « Un Faible Degré d’Originalité » d'Antoine Defoort, toujours sous licence libre Creative Commons BY-SA Références pour la partie sur les annonces diverses L'April appelle à soutenir la fondation GNOME dans son action contre les trolls des brevets Communs numériques - Données en commun par Jean Christophe Becquet le e mardi 29 octobre 2019 à Digne-les-Bains de 18h à 19h Succès pour la campagne de financement de la version internationale de « La bataille du libre » Soirée de contribution au libre jeudi 31 octobre 2019 à la FPH (Paris, 75011) Premier Samedi le 2 novembre 2019 au Carrefour Numérique² de la Cité des Sciences et de l'Industrie L'Agenda du Libre Références et clins d'œil au Guide du voyageur galactique L'émission du 29 octobre 2019 était la 42ᵉ émission de Libre à vous ! et 42 est un nombre fétiche dans la culture geek, informatique, la culture de l’imaginaire. Nous avons fait quelques clins d’œil et références à l'œuvre de Douglas Adams. Le Guide du voyageur galactique célèbre notamment pour sa phrase de couverture Don't Panic (Pas de panique) La serviette La grande question sur la vie, l'univers et le reste (réponse : 42) « Salut, et encore merci pour le poisson » et la disparition des dauphins Le Dernier Restaurant avant la fin du monde Pauses musicales Les références pour les pauses musicales : Notre pad pour proposer des musiques diffusées sous une licence libre le site de Dogmazic La fin de Saint Valéry par Ehma (Licence Art Libre, 2 minutes 17) Jack’s Playing Ball par Jono Bacon (Creative Commons BY-SA 3.0, voir le site de Jono Bacon, 3 minutes 36) For Such a Thing to Land par Mela (Creative Commons BY-SA 3, 2 minutes 53) Le générique de début d'émission est basé sur Wesh Tone par Realaze (Licence Art Libre 1.3) Wesh Tone par Realaze (Licence Art Libre 1.3, 4 minutes 36) $( document ).ready(function() { var hash = document.location.hash; if (hash) { var tab = $(hash).parent('.tabcontent').attr('data-fromtab'); document.getElementById(tab).click() } });
We react to the "ship date" of the Librem 5, and look back at when it was first announced. Then our take on what steps Pursim could take to turn this situation into a net postive.
On Episode 2 of Making Things, we will talk with Grant Flaharty and Eric Beardslee. Grant is the President and CEO of Aleph Objects, and Eric is the Product Marketing Manager. We discuss the advantage of operating with Open Hardware and Free Software, Getting Customer Feedback, and answer the question Can 3D printing really be used for production parts? And much, much, more If you are in the manufacturing space, then you will get a lot of value from this podcast. Show Notes: [1:30] Grant’s Introduction [2:22] Eric’s Introduction [4:30] Open Hardware & Free Software [6:10] Utilizing a community of innovators [11:10] Spending time at Gemba with the customer [17:10] Printers as a viable option for production manufacturing [19:40] Challenges with Bio Printing [23:38] What’s Next? 2 Year + Plan [25:20] Additive and Subtractive Manufacturing [26:10] Barrier to Entry [29:45] Marketing in different countries [35:00] Involvement with Education
TODAY'S
Is the great hope for open hardware actually going to materialize or is RISC-V just hype? Are some conspiracy theories worth more than just passing disdain? Plus hoarding all your own tracking data, and some great #AskError questions. 00:00:18 #AskError: What's the best decade for music? 00:04:13 RISC-V 00:12:43 Collecting our own data 00:24:02 #AskError: Pain for principles - where's your threshold? 00:30:24 Conspiracy theories
Episode 300: ControlTalk NOW — The Smart Building and HVAC controls Videocast and PodCast for week ending Jan 27, 2019 celebrates the 300th episode of ControlTalk NOW with our guests: Lynxspring’s Marc Petock, Jackson Control’s Roger Rebennack, and EasyIO’s Mike Marston, and Lim Hoon Chiat. A very special thanks to all the members of the ControlTrends Community that joined in on our celebration, particularly, the team at Jackson Control; Ken Sinclair, Automated Buildings; Howard Berger, Realcomm; Jim Hayman, CGNA; Aaron Gorka, ANT Technologies; and Stephen Johnson, McKenney’s. Eric and I thank you from the bottom of our hearts, as we make ready for the next 300 episodes. Standing Room Only Session –> Next Generation HVAC Controls: Open Hardware – Open Software. The panel of Brad White, Nicolas Waern, Calvin Slater, and Zach Nestov laid out their concepts of next generation of Open Hardware and Open Software to a standing room only crowd at their session at the 2019 AHR EXPO. The opinions from the attendees was remarkably candid and often contrary to the panel’s as the transformative changes disrupting the BAS industry naturally set many of the old-school traditionalist’s viewpoints at odds with the extraordinary economic implications of espousing open (free) hardware and software. Tridium University: Don’t Miss These Training Courses offered Throughout 2019. Tridium University is offering a wide variety of training courses across the world in the coming months. Our award-winning instructors and certified training partners stand ready to help the global Niagara Community innovate with Niagara solutions. The Smart Building Automation Evolution: From Ethernet to Emotion. Join Ken Sinclair, Therese Sullivan and Brad White as they discuss Smart Building controls evolution over the last twenty years. The smart building controls evolution is closely coupled with the internet. What has changed in the 20 years of the Internet? Cost is down; speed is up, everything has an IP address, the Internet has become clouded with powerful microcomputers that are out on the edge, self-learning and sharing their intelligence with everyone – and everyone is continuously connected. The post Celebrating Our 300th Episode of ControlTalk NOW — Smart Buildings Videocast and PodCast appeared first on ControlTrends.
Join us in the Fishbowl! Today we bring you a great conversation about decentralized hardware, specifically focused on sensors, open hardware, and trusting hardware. This discussion took place at the 2018 Web3 Summit in Berlin, Germany. This episode is sponsored by our friends at https://Giveth.io, and produced by Giveth contributors Joshua and Bruce of https://Disinter-Media.com To help support the podcast, please donate ETH to our wallet at: 0xDa77eB50dA282bb1BC54a0677622854AeFE05B94 Learn more about us at https://dattpodcast.com Until next time, keep Decentralizing All The Things!
We speculate about a future where IBM owns Red Hat, and review the latest Fedora 29 release that promises a new game changing feature. Plus Chris returns from MeetBSD with his review, and we get the inside scope on System76’s Thelio hardware. Special Guests: Alan Pope and Martin Wimpress.
This episode was recorded in the bowels of Sussex University when we met up with Tom Baden a Neuroscientist interested in how the visual system processes information. Our motivation for chatting to Tom was a brilliant project called the FlyPi that he developed, along with Andre Chagas another Neuroscientist who joined us via the magic of Skype. FlyPi is a great representation of a seemingly growing phenomena of DIY tools within the labs - you can read the paper for the specs, but in short it's a 3D printed lab for imaging experiments - specifically of the fruit fly (as the name FlyPi might suggest). Along with the FoldScope, and a number of other simple, cheap tools (including a fidget spinner centrifuge ...), the ability to probe the natural world in a meaningful way is being made available to a much wider audience. We spoke a bunch about Tom's Trend in Africa programme, which trains up researchers in underserved parts of the continent so they're up to scratch with the latest neuroscience tools/knowhow. We also discussed the broad topic of the maker movement in biology, the fear of experimenting with experiments, and the way that DIY hardware in science needs to be shown off in the appropriate venues (and that means not just buried away in the academic literature). We thoroughly enjoyed chatting to Andre and Tom, and we left feeling energised that the spirit of ingenuity, of tinkering, and playing with science is alive and well.
Si hay algo que nos marcará el resto de nuestras vidas es ese momento en el que tuvimos el primer contacto con un ordenador. En España esto sucedió en la década de los ochenta. Tras muchos años, tuve la misma sensación cuando me encontré con Arduino y el Open Hardware.Estoy seguro que estos hitos tecnológicos saldrán en los libros de historia y que nuestros hijos y nietos podrán decir que sus antepasados vivieron esa época. Al igual que nosotros, los de mi generación, hemos vivido con la sombra de la guerra y el hambre de nuestros padres y abuelos.Desde la lejanía siempre he percibido a David Cuartielles como una persona comprometida, seria y rigurosa. Esta entrevista me ha demostrado que los principios son los pilares sobre los que se sustentan las personas. David tiene muy marcados esos principios que han dado pie a la mayor plataforma de Open Hardware de la historia, Arduino.Más información en https://programarfacil.com/podcast/david-cuartielles-open-hardware/
Emprender es una de las tareas más difíciles y exigentes a las que me he enfrentado en toda mi vida. El mundo Maker requiere de experiencia, pasión y constancia. Si además pretendes vivir de ello, debes convivir con el Open Hardware y Open Software, sinónimo, en muchos casos, de gratis.No hay tregua, no puedes tener un día malo o de bajón, se puede escapar esa historia que estabas esperando o esa idea que llevas meses buscando. Cuando grabé este podcast era uno de esos días en los que casi tiras la toalla. Pero todo cambió a última hora, a eso de las diez de la noche.Había quedado con Oscar, uno de los fundadores de BricoGeek, la tienda de Arduino y Raspberry Pi líder en España. Como por arte de magia, a través de las ondas sonoras, Oscar me transmitió su ánimo y entusiasmo desde el primer minuto.Ese día que había sido especialmente gris, se tiñó de repente en un universo multicolor bañado con toques de programación, electrónica y curiosidades del movimiento Maker. Fue una conversación muy enriquecedora que guardo en el cajón de los recuerdos para cuando tenga otro momento de depresión.Muchas gracias Oscar por animarme y compartir tus experiencias conmigo y con todos los oyentes.Historia de una tienda Maker, BricoGeekBricoGeek tiene una historia paralela a la propia placa de Arduino. Se ha criado y ha crecido acompañado por los diferentes modelos Open Hardware del mundo Maker. Han vivido de primera mano la evolución del sector y han visto crecer, madurar y evolucionar todos los modelos de Arduino.Más información en https://programarfacil.com/podcast/tienda-maker-bricogeek/
En este capítulo voy a hablar de la computación física desde el punto de vista de Arduino. Para entender este concepto, tenemos que ser conscientes que la programación o computación física, involucra algo más que programar en un lenguaje de programación. Esto es una parte de esta disciplina y por lo tanto, se debe tratar como tal. Otra de las áreas involucradas dentro de la programación física es el hardware. En este punto, el Open Hardware (o hardware abierto) juega un papel muy importante. Por último, debemos conocer las herramientas necesarias para poder desarrollar este concepto en toda su extensión.Durante este artículo y el capítulo del podcast que acompaña, voy a dar una visión general de este concepto y todo lo que involucra.Necesito que me hagas un favor, votar por Programarfacil en los premios Bitácoras. Solo te llevará 2 minutos, muchas gracias ;).ejemplo_boton_300¿Qué es la computación física?Se centra en diseñar dispositivos, objetos e incluso entornos que permitan establecer un canal de comunicación entre el mundo físico y el mundo virtual. Aunque esto suene a algo relacionado con el futuro, la realidad es que llevamos conviviendo con esta disciplina mucho tiempo. Solo tenemos que pensar en un ordenador o en un dispositivo móvil. Estos dispositivos ponen en contacto nuestro mundo, el mundo físico, y el mundo virtual de las máquinas y ordenadores.El diálogo se realiza a través de interfaces hardware como un teclado, ratón, micrófono, pantallas, altavoces etc... La finalidad de la computación física es diseñar estas interfaces para que sean capaces de detectar alteraciones en el medio físico y traducirlas a señales que entiendan las máquinas. Esto se hace tanto a través de software como de hardware.En la actualidad, cuando desarrollamos un software para un ordenador o un dispositivo móvil, estamos aplicando computación física. El problema que existe es que solo tocamos una de las patas de esta disciplina. Las interfaces hardware de los dispositivos actuales, nos limita a la hora de diseñar software para esas interfaces. Gracias al Open Hardware, esto está cambiando.En resumen, para avanzar en el mundo de la computación física, necesitamos de ciertos componentes hardware (transductores) que conviertan los cambios de energía producidos por las alteraciones en el medio físico, en señales eléctricas entendibles por los ordenadores y máquinas. Aquí es donde entran en juego los sensores. Son los encargados de transformar una magnitud física en una señal eléctrica. Pero como esta comunicación es bidereccional, también necesitaremos actuadores que convierten las señales eléctricas en magnitudes físicas.Los ordenadores, ya sean microprocesadores o microcontroladores, son los encargados del control de los sensores y actuadores. Deben ser capaces a la vez, de comunicar con otras máquinas para mostrar los datos en pantallas multimedia o almacenar información en base de datos o en la nube.Proceso Computacion FísicaDiseño de interfaces hardware en la computación físicaComo ya hemos visto, una de las partes importantes dentro de la computación física es el hardware. Aquí se ve involucrado tres componentes de hardware a nivel básico.Los sensores serán los encargados de detectar esas alteraciones en el medio físico y transformarlas en señales eléctricas. Tenemos como ejemplos el sensor de temperatura LM35 o el DHT11 que además mide la humedad. Dentro de esta categoría podemos encontrar también el sensor de ultrasonidos HC-SR04 con el que podemos hacer un sensor de nivel de agua.Los actuadores harán lo contrario, convertir señales eléctricas en magnitudes físicas que activan procesos. Los motores paso a paso de las impresoras 3D o los relés son ejemplos de actuadores. Incluso un LED funciona como tal.El microcontrolador será el encargado de controlar y gestionar los sensores y actuadores. Podríamos pensar en utilizar un microprocesador, nos daría más potencia y funcionalidades y es verdad, pero los microntroladores tienen ciertas características por las cuales es la opción más óptima. Dentro del propio chip viene todo integrado, memoria RAM donde se almacenan datos temporales, memoria ROM o Flash para almacenar los programas y dispone de entradas y salidas que nos permitirán conectar los sensores y actuadores.Además, los requerimientos que vamos a necesitar no son muy exigentes, solo procesaremos la señal de entrada y salida. Los microcontroladores son más económicos y más compactos que los microprocesadores. Por último, nos permite comunicar con otras máquinas a través de diferentes protocolos, una característica que se requiere a la hora de diseñar interfaces hardware para la computación física.Y cuando hablamos de microcontroladores, se nos viene a la cabeza Arduino. Sin duda alguna es la mejor opción para realizar nuestros proyectos.¿Qué es Arduino?Arduino es una placa microcontroladora para el prototipado. No voy a entrar en contar otra vez su historia pero si que hay que dejar claro ciertos aspectos. Fue creada en el año 2005 por cinco señores entre los cuales está David Cuartielles, un español de Zaragoza del cual debemos estar muy orgullosos. En principio estaba destinada a estudiantes para que pudieran conectar componentes y hacer sus desarrollos.Dos características hacen única a esta placa, su bajo coste y su sencillez a la hora de utilizarlo tanto a nivel de software como de hardware. Además, cuando adquirimos un Arduino no solo estamos comprando una placa, también tenemos a nuestra disposición una plataforma totalmente abierta. Tenemos un entorno de desarrollo de código abierto, podemos bajarnos su código fuente, y una documentación muy extensa.Por lo tanto, si vas a adquirir uno, piensa antes de comprar una copia, ¿quieres que el proyecto y la plataforma sigan siendo libres y de acceso a todo el mundo?Pero quizás la idea más fantástica que tuvieron estos cinco señores fue publicar el diseño de la placa microcontroladora con licencias libres Creative Commons. Esto significa que cualquiera puede fabricar una replica o modificar y adaptar el diseño a sus requerimientos sin pedir permiso. Es más, podemos llegar a comercializar la placa sin ningún problema eso si, siempre respetando la imagen de marca.Dentro de la gama de productos que nos ofrece Arduino, el más utilizado y comercializado es el Arduino UNO.
O que é o opensource e como pode mudar a forma como encaramos a tecnologia e o seu progresso. Patrocinios: https://protonmail.com/ http://reprap.pt/
Seguramente el tema del que te voy a hablar hoy en el podcast te suene a ciencia ficción y creas que es algo que solo lo podemos ver en las películas del mismo género. Sin duda alguna, no estamos en lo más alto en la gráfica de desarrollo en cuanto a soluciones y aplicaciones en esta materia, pero esto no quiere decir que no podamos investigar y aprender de esta ciencia. Ya te conté ¿por qué debemos aprender visión artificial? y hoy te voy a hablar como podemos introducirnos en la visión artificial, OpenCV y Phyton.Antes de continuar quiero hablarte del Campus de Programarfacil. Si quieres crear tus propios proyectos con Arduino o algún dispositivo Open Hardware, debes dominar dos disciplinas, la programación y la electrónica. En el Campus estoy volcando todo mi conocimiento en estas materias con cursos de diferentes niveles, básico, intermedio y avanzado. Tendrás a tu disposición un formulario de soporte premium y sorteos de material electrónico e informático. Entra y busca tu curso.Este tema no es nuevo en el podcast. Ya he hablado en diferentes capítulos:18. Realidad aumentada44. Tratamiento de imágenes con JavaScript64. Proyectos curiosos con Arduino67. Big Data y visión artificialHoy voy a profundizar en la materia y te voy a dar los pasos necesarios para empezar a programar con la biblioteca más famosa de visión artificial, OpenCV.¿Qué es OpenCV?OpenCV es una biblioteca libre desarrollada originalmente por Intel. Vio la luz en el año 1999. Escrita originalmente en C/C++, su mejor virtud es que es multiplataforma, se puede ejecutar en diferentes sistemas operativos (Linux, Windows, Mac OS X, Android e iOS). También la podemos utilizar en diferentes lenguajes de programación como Java, Objective C, Python y mi favorito C#. Precisamente para este último existe una versión que se llama EmguCV.En junio de 2015 se produjo un hito importante, por fin la versión 3.0 estaba disponible. Si hechas números, en 16 años (de 1999 a 2015) solo ha habido 3 versiones. Esto es debido a que desde un principio esta biblioteca ha sido robusta y muy eficiente.En esta última versión cabe destacar que por fin es compatible con la última versión de Python, la 3.0. Esto permite aprovechar todas las ventajas de la última versión de este lenguaje.Quizás sea la biblioteca de visión artificial más importante y más usada del mundo. Es utilizada por universidades, empresas y gente del movimiento Maker para dar rienda suelta a su imaginación al tratarse de un software libre.Pasos para instalar OpenCV y PythonTe preguntarás ¿por qué Python? Aunque todavía no he tratado este lenguaje de programación ni en el blog, ni en el podcast, si que te puedo contar que Python es muy sencillo de usar, favoreciendo el código legible gracias a su sintaxis sencilla.Debemos ser conscientes que el lenguaje nativo de OpenCV es C/C++, con la complejidad que ello conlleva si queremos utilizar esta biblioteca en nuestros proyectos.Lo que más me gusta de Python es que es un lenguaje fácilmente portable a otras plataformas entre las que se incluye Raspberry Pi. Si además disponemos de una cámara conectada, imagínate lo que podemos llegar a conseguir.Aunque en mi día a día yo utilizo Windows y en el Campus he decidido empezar a con este sistema operativo, se puede hacer de igual manera con Linux y OS X.La decisión de empezar por Windows es muy sencilla. Es el sistema operativo más utilizado del mundo y no porque lo diga yo, solo tienes que ver los datos estadísticos que nos proporciona Net Market Share. Según esta empresa, más del 90% de usuarios utilizan Windows.estadistica-uso-sistema-operativoAún así podemos pensar que es una estrategia de ventas y que esta empresa puede pertenecer al magnate de Redmond. Por eso voy a compartir los datos estadísticos obtenidos de Google Analytics sobre el uso de sistemas operativos en esta web osea, vosotros los usuarios.estadistica-analytics-sistema-operativoComo puedes ver hay una diferencia aplastante con el resto de perseguidores. Por eso he optado empezar por Windows, para poder llegar al mayor número de gente y que nadie se sienta excluido.Lo primero que debemos saber antes de empezar con los pasos a seguir para instalar OpenCV y Python, es que esto ya no es una tecnología plug and play. Estamos acostumbrados a hablar de Processing, Arduino, Scratch y las tecnologías fáciles de usar. Con OpenCV la cosa se complica, sobre todo a la hora de preparar el sistema. Pero yo te voy a dar los pasos necesarios para que empieces de una forma muy sencilla. La instalación consta de 3 pasos.Paso 1: Instalación de Python 3.0 con paquetes adicionalesYa no solo tenemos que instalar el lenguaje de programación, para utilizar OpenCV necesitamos instalar, además, ciertos paquetes de Python que nos hará la vida más fácil cuando desarrollemos aplicaciones en visión artificial.NumPy: es una biblioteca de código abierto que da soporte a vectores y arrays para Python.SciPy: es una biblioteca de código abierto que contiene herramientas y algoritmos matemáticos para Python.Matplotlib: es una biblioteca de código abierto para la generación de gráficos a partir de vectores y arrays.Pip: gestor de paquetes para Python.Se puede instalar cada paquete por separado, pero existen plataformas como Anaconda 3 donde viene todo integrado en un único instalador. Te recomiendo que lo hagas con este tipo de plataformas.Paso 2: Instalar OpenCV para Python 3Quizás este paso pudiera ser el más complicado pero gracias al gestor de paquetes Pip se hace muy sencillo. Solo debemos de descargar la versión para nuestro sistema operativo en formato whl y luego instalarlo. Es muy simple gracias al gestor de paquetes.Paso 3: Instalar el entorno de desarrollo (Opcional)Este paso es opcional, podemos utilizar el bloc de notas de Windows para programar en Python. Mi consejo es utilizar Sublime Text 3 y el plugin Anaconda, que convierte este IDE en un entorno de desarrollo optimizado para Python con todas sus funcionalidades.Y estos serían los 3 pasos recomendados para configurar el sistema. Puedes ir al Campus y ver los como lo hago yo paso a paso con vídeos, imágenes y el código necesario para que todo funcione correctamente.El recurso del oyenteHoy traigo un recurso del oyente especial, el email recibido por Antonio Otero. Ha significado mucho par mi porque el objetivo de este proyecto es precisamente ese, ayudar a la gente y en este caso se ha conseguido.Gracias señores por su buena labor.Siento la necesidad de comentarles una situación. (ya os di las gracias en un comentario, pero quiero extenderme mas)Aparte de mi trabajo como desarrollador web, soy formador de inserción para el empleo. Este año me a tocado dar un curso de microsistemas a un grupo algo especial. (Jóvenes entre 18 y 22 años que digamos andan un poco perdidos por no decir nada mas, unos panoramas....).Acostumbrado a mis clases habituales (para "adultos"), no daba con la manera de interesarles en la materia. El temario es muy variado, SO, hardware, electrónica muy básica, scripts mantenimiento.... todo básico pero muy amplio.No encontraba la manera y estaba sufriendo porque no conseguía enderezarlos, estando al borde de la expulsión de algunos alumnos.El caso es que como todas las mañanas en mi hora de trafico hacia el curso y harto de las noticias de política, se me ocurrió poner vuestros podcasts, y habéis sido una inspiración para mi. Habéis cambiado mi forma de ver algunas cosas, me habéis contagiado vuestra ilusión (quiza ya habia perdido alguna) y como buen virus yo se la he trasmitido a mis alumnos.Con scratch he conseguido que se interesen por la programación, y ahora me hacen script de linux bastante majos. incluso hemos estado con ensamblador (muy básico). Pero espero que me programen arduino con c :-)Con arduino están emocionados (he comprado 4 de mi bolsillo pues el centro no los pone). y eso que aún no los han tocado, pero aprenden la teoría con gran interés deseando ponerla en practica :-)En fin, han cambiado de comportamiento completamente, están involucradisimos y no faltan a una clase, y quiero haceros participes de este éxito.La única mala noticia es que estoy llegando al posdcast de esta semana y no se si aguantare a esperar una semana para escucharos de nuevo :-)Gracias, Antonio OteroYa me despido por esta semana, recuerda que nos puedes encontrar en Twitter y Facebook.Cualquier duda o sugerencia en los comentarios de este artículo o a través del formulario de contacto.
Aunque la crisis en el sector de la construcción ha causado que la domótica esté estancada, en la actualidad hay soluciones basadas en el Open Hardware que pueden dar un empujón a este sector. Hoy vamos a hablar de la automatización del hogar con Arduino.En la automatización o domótica tradicional, existen grandes inconvenientes que nos permitan implementarlo de una forma sencilla en el hogar. Por un lado encontramos el obstáculo del precio. Si nos centramos en un proyecto típico, encontramos los siguientes componentes básicos:Unidad central: será el corazón del sistema. Puede ser un ordenador o una central domótica.Sensores: captan parámetros del entorno que se registran o que permiten gestionar actuadores.Actuadores: actúan sobre el sistema según unos parámetros establecidos.Comunicación: protocolo de comunicación utilizado entre los diferentes dispositivos del sistema domótico.Aunque no podemos generalizar en precios, podríamos conseguir un sistema de este tipo desde 130€ hasta lo que nos queramos gastar. Por supuesto que cuanto más caro sea, más robusto y más complejo será el sistema.Se trata de dispositivos especializados para una labor concreta y están pensados para que hagan su función. El precio dependerá mucho del sistema de comunicación y de la marca que elijamos eso sí, cuando nos decidamos por una marca o empresa, poco podremos hacer para cambiar.Dentro de la domótica existen estándares de comunicación como X10, KNX o Zigbee los cuales son utilizados por los fabricantes para comunicar entre sus dispositivos. Estos estándares hacen que podamos utilizar elementos de diferentes marcas dentro de una misma instalación. Aunque yo no soy un experto en la materia, se que en muchos casos esta integración no es sencilla y puede ocasionar verdaderos dolores de cabeza. Lo que si que tengo claro es que no se trata de sistemas abiertos, son sistemas que, aunque utilizan estándares de comunicación, no podemos replicar, modificar o mejorar, este es otro de los grandes inconvenientes, que son sistemas cerrados.Sin duda alguna, las comunicaciones inalámbricas hacen que el coste se reduzca a costa de la estabilidad y fiabilidad del sistema. Si por el contrario utilizamos un cableado físico, buses de comunicación o comunicación por cable, los costes se disparan, más todavía si el sistema se intenta implantar en una casa ya construida.Quizás uno de los retos a los que nos enfrentamos sea poder aplicar técnicas del movimiento Maker y del DIY a la automatización de los hogares. En este punto, microcontroladores como Arduino MKR1000 o Arduino 101, tengan mucho que decir.Precisamente el curso que estoy preparando donde verás como hacer un dispositivo del IoT de principio a fin, sea un buen punto de partida para crear sistemas domóticos. En él verás temas de electrónica, programación física y programación de interfaces de usuario.Arduino ha cambiado las reglas del juego en temas de electrónica y programación. Gracias a su carácter Open Hardware y Open Software, podemos construir sistemas hardware, compartir las ideas y proyectos, todo gracias a la comunidad que hay detrás de este movimiento. Esto está cambiando todo en la automatización del hogar.Gracias a Arduino y al Open Hardware, podemos construir nuestros propios sistemas adaptados a nuestras necesidades y totalmente personalizados. Al contrario que los sistemas cerrados tradicionales, tenemos un control total sobre el conjunto, podemos añadir nuevos dispositivos, ya sean sensores o actuadores, personalizar la interfaz gráfica y tenemos detrás una comunidad que nos da soporte los 365 días del año totalmente gratis.Contra estos beneficios, pocas empresas del sector pueden competir. El mayor inconveniente que encuentro es el rol multidisciplinar que debemos asumir. No se trata de una tarea sencilla, sobre todo cuando hablamos de programación. Debemos tener una buena base para crear un sistema domótico decente.Nos podemos basar en diferentes herramientas que encontramos en Internet. Uno de ellas sería el OpenDomo, un protocolo creado especialmente para el ámbito domótico. Recientemente han anunciado que no se va a actualizar y por lo tanto ya no sería una buena opción.Sin duda alguna la mejor opción es apoyarnos en estándares como Firmata, HTML5 y CSS3. Todo esto es accesible para cualquiera de nosotros. Como siempre digo, la dedicación y constancia son los elementos fundamentales para sacar adelante cualquier proyecto.Arduino y en especial el modelo MKR1000, son una gran oportunidad para hacer crecer la domótica y automática. Podemos utilizar la MKR1000 como microcontrolador para gestionar la obtención de datos y la actuación sobre diferentes dispositivos. Por ejemplo, podemos controlar un relé para encender o apagar una luz desde un dispositivo móvil o podemos crear un proyecto que encienda una luz al paso de una persona. Dos proyectos muy sencillos y que pueden servir de base para crear proyectos más grandes.En este aspecto, también tiene mucho que decir nuestro viejo conocido el ESP8266, módulo WiFi de muy bajo coste y consumo. No nos ofrece la facilidad de un Arduino, pero puede ser un buen complemento para una instalación.Lo ideal sería que fuéramos capaces de utilizar Arduino MKR1000 para prototipar y poder sacar el chip de Atmel ATSAMW25 fuera de la placa. Podemos encontrar este chip por solo 19€, 12€ más barato que el Arduino MKR1000. De esta manera estaríamos abaratando todavía más el proyecto.Por último hablamos de los relés, interruptores eléctricos de alto voltaje. En este artículo te contmamos cómo funciona este dispositivo y cómo utilizarlo con Arduino. Hay que tener en cuenta algo importante y de lo que ya hemos hablado en alguna ocasión. Arduino MKR1000 funciona con 3,3 V es decir, por sus salidas digitales vamos a tener ese voltaje. Los relés típicos funcionan con un voltaje de 5 V y por lo tanto no vamos a poder suministrar el voltaje suficiente para hacer que funcione. Existen varias soluciones, entre ellas cambiar por un relé de 3 V o utilizar un transistor como interruptor de una fuente que nos suministre los 5 V necesarios para poder trabajar con un relé de este tipo.Ojo al utilizar altos voltajes, dejamos atrás los 5 V o 3,3 V y empezamos a utilizar 220 V como ocurre en España. Es un poco peligroso así que pido precaución en este sentido.El recurso del oyenteOtra semana más tenemos el recurso de José Minguez de Logroño. Nos manda una aplicación para móviles que se llama WiFi Analyzer que precisamente hace eso, analizar nuestra red WiFi.Muy útil cuando tenemos problemas de calidad, podemos saber rápidamente si alguna WiFi de algún vecino se solapa, en términos de frecuencia, con nuestra red.También resulta útil para medir la calidad en el caso de que queramos utilizar Arduino MKR1000, sabrás si tienes la señal suficiente para que se conecte.Por otro lado, y por segunda semana consecutiva, Lluis Toyos también nos envía otro recurso, PlatformIO. Es un ecosistema de código abierto para el desarrollo de aplicaciones IoT. Está compuesto por un entorno de desarrollo, un módulo de integración continua y un gestor de librerías.Una de las cosas que más me han llamado la atención es la utilidad Intellisense que incorpora el IDE. Quizás, en el entorno de desarrollo oficial de Arduino, sea una de las cosas que más eche de menos, que te proponga sentencias según vayas escribiendo.Y esto es todo por hoy, si quieres enviarnos tus recursos y aparecer en esta sección lo puedes hacer a la dirección info@programarfacil.com o por uno de estos tres métodos:Formulario de contactoTwitterFacebookApúntate a la lista de distribución para recibir todas las noticias de Programarfacil.Agradecemos tus valoraciones, si no lo has hecho ya por favor, entra en alguna de estas plataformas y déjanos algún comentario, estaremos eternamente agradecidos y podremos llegar a más gente.iTunesivooxSpreakerMuchas gracias, nos escuchamos en el próximo programa, no faltes a la cita y sé feliz.
Today on Bytemarks Cafe, we'll learn about sensor technology and the concept of open hardware. We'll talk to a team from the School of Ocean & Earth Science and Technology (or SOEST) about building high quality, low cost data gathering. 5pm on HPR-2
Resgate do espírito Hacker, Internet das Coisas (IoT) e Mobile. Nesta edição, Ricardo da Silva Ogliari conversa sobre o conceito da Cultura Hacker. Ricardo é professor na FIAP, fundador do Things Hacker Team, eleito um dos 10 nomes de Open-Hardware de 2013, pela revista iMasters, além de palestrante em eventos nacionais e internacionais, como Campus Party, FISP, TDC e QConSP.
Разговор с Цветан Узунов, собственик на Olimex. В този изключително увлекателен разговор, Цветан обяснява за историята на фирмата, какво е Open Hardware, как се случват наистина нещата в този сектор, каква е ролята на Китай и множество забавни и интересни истории през които е преминал. Директен линк към част 2 (mp3) (ogg)
Florian SCHWEIKERT, Horst JENS und Gregor PRIDUN plaudern über freie Software und andere Nerd-Themen. Shownotes auf http://goo.gl/cpsyjm oder http://biertaucher.at
Wir stellen die neue Community WirMachenRoboter.com mit Aleksej vor. Weiterhin natürlich die üblichen Informationen über Roboter und einige nützliche Technik-Tipps.
Horst JENS, Johnny ZWENG und Harald PICHLER plaudern über freie Software und andere Nerd-Themen. Mehr Information, Links, Bilder, Videos, Tags, Transkripte, extra-soundfiles etc. gibt es in den Shownotes: http://goo.gl/TE5Ju (bzw. http://biertaucher.at ). Bitte nach Möglichkeit diesen Flattr-Link anlicken: http://flattr.com/thing/1090645/Biertaucher-Podcast-Folge-085
The theme of today's show is "Super Jumbo" and your hosts are Jason Kridner, Gerald Coley and Jeffery Osier-Mixon.To provide questions or suggestions:Call +1-713-234-0535 orvisit the BeagleCast suggestions formLinks to the recordingsBeagleCast-20110325.mp3BeagleCast-20110325.oggHeadline newsWindows Compact 7 Two new Distributors in China -- ChipSee -- CATCAN From the RSS feed FFmpeg fork becomes libav Clojure on The Beagleboard -- What is a closure vs. what is Clojure?The 2.6.38 kernel is out What Is CLFS? - File System - Check! OpenEmbedded at CeBIT 2011 -- Should we still be excited about CES and CeBIT? Face chasing BeagleBoard-based robot using a Kinect How to build QT Framework 4.7.2 and OpenCV 2.2 for Beagleboard-xM -- How to build sample program for capturing image from camera (OpenCV and Qt) SPI with Trainer-xM Running CyanogenMod on BeagleBoard -- What is CyanogenMod? -- What is Rowboat?NEWS IGEPv2 goes Open Hardware Open Hardware Summit date announced for 2011? -- Looking for votes on a logoBeagleboard: Power usage (current draw) for certain scenarios Upcoming events Indiana Linuxfest OpenSource COM BOF/LUG Mumbai Meeting, 26th March 2011 Community activityGSoC Update -- BeagleBoard.org not a mentoring organization this year -- Still looking for mentors to volunteer to mentor in other projects -- Considering a smaller scale BeagleBoard Summer of Code Always Innovating Announcement...Super Jumbo Beagle Buffet! Upcoming Khasim Syed Mohammed will be on next week to discuss the Android Rowboat project