Podcasts about national training manager

In this informative podcast episode, Bryan from HVAC School is joined by Louise Keller, the National Training Manager for UEI Test Instruments, to discuss the critical importance of carbon monoxide safety and proper combustion analysis. The conversation begins with lighthearted banter about the previous night's Tactical Awards ceremony before diving into the serious topic of CO dangers and detection. Louise shares valuable insights about the dangers of carbon monoxide exposure, particularly at lower levels that might not trigger standard home CO alarms. She explains that CO poisoning can mimic many other conditions, including early-onset Alzheimer's, traumatic brain injury, and mobility issues. Bryan adds historical context by recounting how many Victorian-era "ghost stories" and fainting episodes coincided with the introduction of gas lighting in homes, suggesting these phenomena were likely CO poisoning symptoms. He also shares the little-known story of Walt Disney's parents, who tragically died from carbon monoxide poisoning in a house that Disney built for them. The discussion shifts to practical applications, with Louise explaining the proper use of combustion analyzers and the importance of regular recertification. They emphasize that visual inspection alone is not sufficient for safety, and proper testing is essential for both client safety and equipment efficiency. The conversation concludes with information about UEI's ServicePlus Guaranteed program, which offers extended warranty coverage, same-day recertification turnaround, transparent pricing, and convenient shipping for analyzers. Key Topics Covered: The dangers of carbon monoxide as an odorless, colorless, and tasteless gas How low-level CO exposure can cause serious health issues that mimic other conditions The limitations of standard home CO alarms, which typically won't trigger until reaching 70 PPM for 1-4 hours Proper combustion analyzer startup procedures (starting outside in fresh air) The importance of checking all combustion appliances in a home (furnaces, water heaters, ovens, etc.) Best practices for comprehensive testing, including "appliance sweep tests" Historical context of CO poisoning, including connections to Victorian ghost stories UEI's ServicePlus Guaranteed program for analyzer recertification and warranty extension The importance of regular recertification to ensure accurate readings and maintain warranty coverage Tips for helping clients schedule regular maintenance and safety checks   Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool. Purchase your tickets or learn more about the 6th Annual HVACR Training Symposium at https://hvacrschool.com/symposium. Subscribe to our podcast on your iPhone or Android. Subscribe to our YouTube channel. Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android

Thanks to our Partners, NAPA TRACS, and Today's Class This episode covers the practical benefits of digital vehicle inspections (DVIs) for shop owners. Learn how DVIs can boost Average Repair Orders (ARO) and improve customer communication. Industry professionals share real-world insights on overcoming cultural resistance, the role of leadership, and strategies for successful implementation. Plus, explore how AI enhances inspection reports and processes. Whether you're new to DVIs or looking to optimize, this episode is packed with actionable tips to help your shop thrive. Ben Dexter, National Training Manager, NAPA TRACS Chris Cloutier, Golden Rule Auto Care and CEO of Autoflow. Charlie Pixley, Charlie's Car Car, Clearwater, FL Show Notes Watch Full Video Episode Introduction to Digital Vehicle Inspections (00:00:00) Challenges of Implementing DVI (00:03:03) Leadership and Accountability (00:04:07) Charlie's Experience with DVI (00:05:02) DVI Evolution and Adoption (00:06:25) Ben's Insights on Change (00:07:56) The Importance of KPIs (00:09:41) Battling Priorities in Shops (00:13:01) Improving DVI Processes (00:16:40) Customer Perspective on DVI (00:18:53) Challenges in DVI Implementation (00:19:45) Consumer Engagement with DVI (00:20:26) AI and Technology in DVI (00:21:18) Importance of Customer Complaints in DVI (00:22:36) Professionalism in DVI Communication (00:23:40) Learning from Industry Peers (00:25:21) Benefits of DVI for Sales Growth (00:26:38) Leadership Role in DVI Implementation (00:30:49) 300% Rule in DVI (00:33:03) Creating Habits for Change (00:35:44) Leadership and Accountability (00:36:36) Key Performance Indicators (00:41:21) Start Simple and Improve (00:42:07) Constant Correction and Praise (00:43:55) Thanks to our Partner, NAPA TRACS NAPA TRACS will move your shop into the SMS fast lane with onsite training and six days a week of support and local representation. Find NAPA TRACS on the Web at http://napatracs.com/ Thanks to our Partner, Today's Class Optimize training with Today's Class: In just 5 minutes daily, boost knowledge retention and improve team performance. Find Today's Class on the web at https://www.todaysclass.com/ Connect with the Podcast: -The Aftermarket Radio Network: https://aftermarketradionetwork.com -Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ -Join Our Private Facebook Community: 

In this episode of the HVAC Know It All Podcast, host Gary McCreadie sits down with Jesse Stewart, National Training Manager at NAVAC HVAC to discuss the industry's transition to A2L refrigerants and the essential tools for safe and efficient handling. Jesse, a technical trainer with experience in HVAC tools and safety practices, shares insights into the challenges and opportunities of A2L refrigerants. He focuses on debunking myths and highlighting safety measures. Gary and Jesse discuss tool compliance, best practices, and the importance of training in preparing HVAC professionals for upcoming changes. Expect to Learn: What Are A2L Refrigerants?: Understand what A2L refrigerants are, why the industry is moving toward them, and clear up common misunderstandings. Tools That Get the Job Done: Learn about the tools that are compatible with A2L refrigerants, including vacuum pumps and recovery machines, and what makes them compliant. Staying Safe on the Job: Practical advice on reducing risks by using the right tools and following best practices for handling A2L refrigerants. Recovery Cylinder Basics: How to properly identify, label, and maintain recovery cylinders for safe use with A2L refrigerants. The Value of Good Information: Why it's essential to rely on trustworthy sources and stay up-to-date through proper training. Episode Highlights: [00:00] Welcoming Jesse Stewart and introduction to A2L refrigerants [01:42] Jesse's background and expertise in HVAC tools and safety [01:59] Understanding A2L refrigerants and addressing misconceptions [05:37] Key features of A2L-compliant tools [12:37] Guidelines for marking and maintaining recovery cylinders [14:24] Adapters and hoses for A2L compatibility [17:25] Industry changes and the importance of training This Episode is Kindly Sponsored by: Master: www.master.ca Cintas: www.cintas.com/hvacknowitall Supply House: www.supplyhouse.com Cool Air Products: www.coolairproducts.net Lambert Insurance Services: www.lambert-ins.com Follow the Guest Jesse Stewart on:  LinkedIn: www.linkedin.com/in/jesse-stewart%F0%9F%94%B8-180054205/  NAVAC HVAC: www.linkedin.com/company/navac-hvac/  Follow the Host: Instagram: ⁠www.instagram.com/hvacknowitall1/⁠ LinkedIn: www.linkedin.com/in/gary-mccreadie-38217a77/  Website: www.hvacknowitall.com  Facebook: www.facebook.com/HVAC-Know-It-All-2/

Seth Glauberman is the President of Malco Tools. A fourth-generation member of the family company specializing in automotive detailing products, Seth has been with Malco Tools for 20 years. The company focuses on professional-grade products, while also venturing into products for discerning do-it-yourselfers. Jim Ring is the Owner and Partner at Ringbrothers, a company known for creating custom car parts and restoring and modifying cars. Jim and his brother began their company because they had difficulty finding high-quality, unique car parts. Their passion for cars led them from restoring cars to modifying them and eventually to creating the parts they needed. Justin Rae is the CEO and Co-founder of Cinch, a company that provides data science and automation tools for the automotive service and repair industry. Cinch's software helps shops send service reminders, predict needed services, and understand customer value. Justin has attended SEMA five times, and believes it is an important show for anyone in the automotive space. Brock Swentzel is the President of Wholesale at S&S Tire, a company celebrating its 50th anniversary. Brock comes from a family with a long history in the industry, as his grandfather started the company in 1974. S&S Tire is aiming to expand its business in the Southeast region of the United States. Mike Graber is the President and CEO of Toyo Tires. His experience spans across the industry from sales to product development. In addition to a passionate commitment to product quality and customer engagement, Mike believes genuine relationships and people play a significant role in the success of the tire industry. Sonny McDonald is Sr. National Training Manager at Toyo Tires Corp USA. He has held that position for over 22 years, after working for a decade as a sales representative for The Tire Rack. In this episode… The automotive industry is a dynamic landscape where innovation and collaboration are essential for success. How can industry leaders leverage their experiences to foster growth and adaptability in this competitive environment? According to Seth Glauberman from Malco Tools, Jim Ring from Ringbrothers, Justin Rae from Cinch, Brock Swentzel from S&S Tire, and Mike Graber and Sonny McDonald from Toyo Tire, building strong relationships and embracing innovation are critical to thriving in the automotive sector. They emphasize the importance of networking at events like SEMA, where connections with customers, partners, and suppliers can lead to new opportunities. Additionally, they note the value of adapting to market changes through innovative products and data-driven strategies that enhance customer engagement and service. On this episode of Gain Traction, join host Mike Edge at SEMA, where he talks to Seth, Jim, Justin, Brock, Mike, and Sonny about the significance of networking and collaboration in the automotive industry. The guests share insights on innovative products, custom parts manufacturing, data-driven customer service tools, and strategies for distributor growth. Their conversations highlight how fostering relationships and embracing change can drive success in a rapidly evolving marketplace. Here's a glimpse of what you'll learn:  [03:24] How Malco Tools is reaching new customers [05:00] The unique innovations Ringbrothers uses to reinvent car parts [09:24] How Cinch uses data science [08:29] Why SEMA is crucial for automotive networking  [15:20] The way S&S Tire celebrated its 50th anniversary [21:32] Why Toyo Tire partners with the LA Dodgers  [24:07] The new products Toyo Tire is launching Resources mentioned in this episode: Seth Glauberman on LinkedIn  Malco Tools Jim Ring  Ringbrothers  Justin Rae on LinkedIn Cinch Brock Swentzel in Modern Tire Dealer S&S Tire Mike Graber on LinkedIn Sonny McDonald on LinkedIn Toyo Tires SEMA Mike Edge on LinkedIn Tread Partners Quotable Moments:  "For us, the thing about SEMA is we can meet our customers, future customers, and really, it's about building relationships." - Seth Glauberman "SEMA is by far the best place to show off your products and vehicles; it's always been really good to us out here." - Jim Ring "Cinch is a data science and automation tool specifically designed for the automotive service repair space to help with service reminders." - Justin Rae "We're a growing company looking to continue to expand across the southeast as a distributor." - Brock Swentzel “It's an homage to all the builders that are out there that want to feature Toyo and that's what we're all about.” - Mike Graber Action Steps:  Build strong relationships in the industry: Networking with current and potential customers is crucial for growth.  Innovate and diversify product offerings: By continuously innovating and diversifying offerings, companies can cater to niche markets and adapt to changing consumer preferences. Leverage data and automation: Businesses can provide personalized customer experiences, improve retention, and optimize operations. Explore new opportunities for expansion: Companies can increase their market presence and capitalize on emerging trends in the industry by actively seeking expansion.  Showcase products at key industry events: Engage with enthusiasts, highlight products, and strengthen brand recognition, capturing the attention of potential clients and partners. Sponsor for this episode... This episode is brought to you by Tread Partners.  At Tread Partners, we provide digital marketing for multi-location tire dealers and auto repair shops.  By using our strategy, branding, and marketing services, we help shops sell more tires and put more cars in bays. We've helped companies like Action Gator Tire, Colony Tire and Service, and Ulmer's Auto Care Center bring extreme growth in paid leads, ROI, and searches.  So, what are you waiting for? Visit www.treadpartners.com or email info@treadpartners.com to learn more.

Riaz Sidi is the Founder of sidi.io, a digital marketing agency renowned for its expertise in demand generation, performance marketing, and funnel strategy. Sidi.io was named one of Ottawa's fastest-growing companies in 2022 and 2023. With a background that includes a five-year streak at Postmedia in roles from digital strategist to National Training Manager, Riaz has rich experience in corporate media. A leader always on the cutting edge of marketing trends, he dedicates himself to understanding and optimizing the customer buying journey, leading a team that integrates online platforms to drive growth for diverse clients.  In this episode… Have you ever wondered how the evolution of digital marketing is changing the way we view traditional advertising? What if your business could predict the customer's needs and cater to them even before they realize the necessity? Is your company ready to leap into an integrated, algorithm-aided marketing strategy? Riaz Sidi, a sales and marketing leader with over 20 years of experience, spills the secrets to transforming a brand's digital presence by dissecting and reverse-engineering the customer buying journey. By integrating innovative tactics such as quiz funnels and targeted Facebook ads, he explains how he helps clients from diverse industries achieve explosive growth. Riaz shares invaluable insights into how his team utilizes data, AI tools, and creative brainstorming to tailor each campaign to the client's unique audience. In this episode of the Inspired Insider Podcast, Dr. Jeremy Weisz interviews Riaz Sidi, Founder of sidi.io, about crafting impactful marketing strategies. Riaz delves into understanding customer pain points and leveraging this knowledge to drive demand generation, lessons learned from his retail struggles, and the demographic targeting and algorithm used in digital marketing for specific industries.

In this episode of the Refrigeration Mentor podcast, host Trevor Matthews talks with Jesse Stewart, National Training Manager at NAVAC, about the importance of self-investment and continuous learning for HVAC technicians to improve efficiency and skill in the trade. Jesse is incredibly passionate about helping HVAC technicians become more efficient and advanced at their trade. Here, he talks in depth about techniques for improving refrigeration system evacuation processes, the new generational attitude around training, proficiency and safety, and even debunks some common myths surrounding A2L refrigerants.  In this episode, Trevor and Jesse are talking about: -The generational shift in attitude toward work, safety and training -Career and financial returns from investing in training -Free resources for training: podcasts, books etc. -Importance of mindset in career advancement -Tips for pulling a better evacuation -Importance of regular performance checks -How to perform a faster evacuation -Bad practices for pulling an evacuation -Dispelling myths and fears about A2L refrigerants -Misinformation on social media about A2L's -Tips for being a better refrigeration technician Helpful links & references: Email Jesse: training@navacglobal.com Learn more about NAVAC: https://navacglobal.com/  Learn more about ESCO Group: https://www.escogroup.org/  REGISTER HERE for the next 12 Week Advanced CO2 Design Course (starts May 2024). Refrigeration Mentor on Instagram Refrigeration Mentor YouTube Channel Upcoming Servicing Compressors, Supermarket and CO2 Trainings: Learn More Here Learn More About Refrigeration Mentor: https://refrigerationmentor.com/ Get your FREE Service & Compressor Troubleshooting Guide: Access Here  

Thanks to our Partners, AAPEX, NAPA TRACS, and Automotive Management Network By leveraging tools like digital vehicle inspections (DVI) and customer relationship management (CRM) systems, businesses can significantly improve their operations and customer experience. These integrations allow for a more streamlined process, from diagnosing vehicle issues to maintaining consistent communication with clients. Ben Dexter, National Training Manager, NAPA TRACS Show Notes Watch Full Video Episode Ben's journey in the automotive industry (00:00:55) Ben's progression from service writer to National Training Manager and his experience in the automotive industry. Importance of shop management systems (00:02:04) The critical role of shop management systems in the automotive repair industry and the support provided by NAPA TRACS. Value of training (00:03:21) The significance of investing in training and the impact of leadership participation in training programs. Building customer rapport (00:11:22) Ben's approach to building customer rapport and the importance of effective communication and attention to customer needs. Significance of scheduling (00:13:12) The shift from reactive scheduling to a coordinated approach, addressing the issues of timely and accurate repairs through effective scheduling. The power of software integrations (00:15:37) The commitment to utilizing shop management software and the potential of integrations with other tools like DVI and CRM for business growth. Utilizing shop management systems (00:19:08) Encouraging the use of shop management systems and the availability of resources for business advancement. Role of technology in DVI (00:20:42) Discussion on the coordinated effort required for effective Digital Vehicle Inspections (DVI) and the benefits of real-time communication. Challenges in utilizing software (00:22:32) Exploring the reasons behind the underutilization of software tools and the need for effective leadership and training. Importance of testing and measuring (00:25:13) Highlighting the significance of testing and measuring business performance for improvement and growth. Communication and customer service (00:28:27) Emphasizing the importance of effective communication with customers to prevent unexpected breakdowns and enhance customer satisfaction. Impact of scheduling on service advisors (00:30:07) Discussing the influence of scheduling on service advisors' decision-making and the need for consistent customer recommendations. Rethinking business analysis (00:32:47) Encouraging a reevaluation of business statistics and reports to identify missed opportunities and improve overall business strategies. Morning Meetings and Reporting (00:33:21) Discussion on the importance of morning meetings, sales reporting by service writer, and constructive performance discussions. Maximizing Existing Resources (00:34:55) Emphasizing the significance of making the most of existing resources before seeking more car count. Linear Quantity Opportunities (00:36:32) Exploration of the linear quantity opportunities in parts matrix, addressing traditional matrix problems and opportunities for improvement. Commitment to Lifelong Learning...

Jef McCurdy, a veteran in the roofing industry and National Training Manager for Castagra, shares his journey of balancing personal life and career after adopting his nine-year-old niece. He illustrates how he received support from his colleagues and pitched his efforts towards making his daughter comfortable in their family and his work environment. A strong advocate for prioritizing family over work, Jef promotes spending quality time with loved ones and teaching children the value of time over money. Despite his significant contributions to the industry, his decision to dedicate more time to his family led him to transition into a consulting role and establish a well-received training program for Castagra. Who's the Guest? Jef McCurdy is the National Training Manager at Castagra Products, Inc., and he is involved in the roof coatings industry. He is dedicated to elevating the roof coatings industry through product development and training. He is a roof coatings expert and the founder of CooRooCo (Cool Roof Coatings Consulting)].  Jef is associated with Copa Coatings Co, which is a premier seller of Castagra's Ecodur 201R, a eco-plastic polymer formulated for the roofing industry. Highlights Jef's early introduction to the roofing industry, growing up in a family of roofers and his rise through various roles in the sector Transition to sustainable roofing products without necessarily reducing the quality The value of quality over quantity in attracting potential clients Jef's role as National Training Manager at Castagra, a provider of eco-friendly roof coating His adoption journey and his commitment to creating a better work-life balance His personal experience with adoption and how his colleagues at San Diego Roofing were supportive during his adjustment period Why there should be a balance between work and family time What it means for Jef to level up Episode Resources Connect with Galen M. Hair https://insuranceclaimhq.com hair@hairshunnarah.com https://levelupclaim.com/ Connect with Jeff McCurdy https://www.linkedin.com/in/jefmccurdy/ https://www.castagra.com/ 

There's a connected device for just about everything in your home from lights and cameras to fridges, washing machines, TVs and more...and recent research from Samsung shows consumers have an average of 10.9 connected devices in their households.In this episode Andy Wells is joined by Sam Winkler, National Training Manager at Samsung Australia to talk about how it can help users create their personalised smart home. Hosted on Acast. See acast.com/privacy for more information.

Eric and I had a great conversation with Louise Kellar, the National Training Manager for UEi Test instruments. We share a lot of common ground with Louise on education and proper application in test and measurement. And in this interview Eric and Louise literally shared the common ground they were standing on during the interview which was conducted in the TruTech west studio in Indianapolis, IN. We learn how Lousie's work experience has perfectly tailored for her current role at UEi and what it is like to work for a large family business. We also discuss how women are still underrepresented in the HVAC industry, making up only about 2% of the workforce. And we settle in on a number of things that can be done to encourage more women to enter the HVAC industry, such as: Providing more opportunities for women to learn about the industry Creating more mentorship programs for women in the industry Promoting the HVAC industry as a viable career option for women The HVAC industry is changing and becoming more inclusive, and there are more opportunities than ever for women to succeed in this field. We also reference Jennifer Manzo and HVAChicks – who came on in EP 129 Women should not be afraid to pursue careers in the HVAC industry, and they should know that there is a supportive community of women who are there to help them succeed.   Louise's Linked In: https://www.linkedin.com/in/louise-kellar-bbb659101/ UEi Test Products: https://www.ueitest.com/ECommerce/Default.aspx UEi at TruTechTools: https://trutechtools.com/uei Women in HVACR group: https://www.womeninhvacr.org/   This episode was recorded in October 2023  

Don Detore is the Editor of Tire Business, an industry trade magazine published by Crain Communications, and has over 35 years of journalism experience. Geoff Doster is the President of Linglong Tires, spearheading the brand's North American growth initiatives. George Kingman is the Founder of Advanced Shop Leadership, a group of consultants focused on improving financials, team culture, training, customer experience, and operational excellence. Greg Draper is in charge of purchasing at Dunlap & Kyle Tire Company, a tire distribution company who sells to wholesalers and resellers. Jordan Swerdloff is the Founder of ADV.1 Wheels, and Chief Of Design and Partner at 4PLAY Wheels, making industry leading wheels specifically for trucks. Melanie White is the CEO of Hellwig Products, a part of her family for four generations, and is the SEMA Chairman-elect. Michael Mathis is the President of Atturo Tire, a niche brand of private-label tires for the SUV, crossover and 4x4 market. Robert “Sonny” McDonald is Sr. National Training Manager at Toyo Tires, where he has worked for more than 20 years. He previously served as an aircraft maintenance specialist in the US Air Force. Troy Coughlin Jr. is the Vice President of JEGS High Performance. He is a retired drag racer and three-time champion of the Pro Mod class. Wade Kawasaki is Executive Chairman of The Wheel Group and has started and built multiple aftermarket companies. In this episode… The Specialty Equipment Market Association hosts an annual exposition event. The 2023 SEMA Trade Show was the pinnacle event in the automotive aftermarket industry, drawing thousands of key buyers and decision-makers who were eager to engage with exhibitors.  Participants value the SEMA Trade Show for the unparalleled networking opportunities it provides, facilitating business expansion within a vibrant community. The chairman-elect, Melanie White, highlights the show's growth and SEMA's crucial role in advocating for automotive rights, such as the right to work on one's own vehicle, which resonates deeply with small business owners. SEMA not only represents the largest assembly of small businesses worldwide but also a bulwark protecting the interests of the automotive community. On this special episode of Gain Traction, Mike Edge attends the annual SEMA Trade Show in Las Vegas, where he speaks with ten participants who discuss the value of the trade show, their appreciation for SEMA as an association, and the focus of their respective automotive businesses. Here's a glimpse of what you'll learn:  Don Detore talks about what the SEMA trade show means to the Tire Business publication What makes SEMA valuable to 26-year industry veteran Geoff Doster? George Kingman describes clients' improved work-life balance after receiving coaching from Advanced Shop Leadership Why coming to the trade show is important for Greg Draper to thrive in his role as a purchasing manager Jordan Swerdloff reacts to winning the 2023 New Product of the Year award in the wheel category Melanie White shares how her great grandfather founded Hellwig Products in 1946 The SEMA trade show is the biggest gathering of small business owners and executives in the world The brand-new tire Michael Mathis and Atturo Tires introduced at SEMA Robert “Sonny” McDonald discusses how SEMA promotes the aftermarket Troy Coughlin Jr. discusses the types of products available at JEGS.com Wade Kawasaki describes the crowd and overall vibe at the SEMA trade show Resources mentioned in this episode: Don Detore on LinkedIn Tire Business Geoff Doster on LinkedIn Linglong Tire George Kingman on LinkedIn Advanced Shop Leadership Greg Draper on LinkedIn Dunlap & Kyle on Facebook Jordan Swerdloff on LinkedIn ADV.1 Melanie White on LinkedIn Hellwig Products Michael Mathis on LinkedIn Atturo Tires Robert “Sonny” McDonald on LinkedIn Toyo Tires JEGS High Performance Wade Kawasaki on LinkedIn The Wheel Group SEMA 2023 Recap SEMA 2024 Mike Edge on LinkedIn Tread Partners Sponsor for this episode... This episode is brought to you by Tread Partners.  At Tread Partners, we provide digital marketing for multi-location tire dealers and auto repair shops.  By using our strategy, branding, and marketing services, we help shops sell more tires and put more cars in bays. We've helped companies like Action Gator Tire, Colony Tire and Service, and Ulmer's Auto Care Center bring extreme growth in paid leads, ROI, and searches.  So, what are you waiting for? Visit www.treadpartners.com or email info@treadpartners.com to learn more.

In Episode 1365 of the Pool Nation Podcast we talk to David Jones National Training Manager for Hayward Pool Products. David teaches the Automation Classes at the Pool Nation Boot Camps, and we talk about his journey in the industry and what they have in store for us at the Vegas Boot Camp training classes.   Sponsors The SPPA      BluerayXL    Ultimate Pool Tools     Pool Invoice    AquaStar Pool Products        Raypak      Heritage Pool Supply  

In Episode 5 of 'Career Catalyst' with Nadia, we gain an insightful journey into the empowering role of training and volunteering for women within the community broadcasting sector. Our guest, Jason Velleley, brings a wealth of knowledge as the National Training Manager of CMTO (Community Media Training Organisation). He sheds light on the multitude of ways these opportunities have contributed to the personal and professional growth of women, fostering skill development, and paving the way for leadership roles.

Welcome back to The UK Flooring Podcast! In this episode, we sit down with Steve Davies, the National Training Manager at Uzin Utz, who is a true veteran of the flooring industry.Highlights:From the Tools to College Lecturer:Steve shares his fascinating journey from starting out as a flooring professional working with tools to becoming a college lecturer, where he discovered his passion for training others in the trade.Training the Next Generation of Flooring Fitters:Discover Steve's unique approach to training and mentoring the next generation of flooring fitters. He shares valuable insights into the techniques and strategies he uses to equip newcomers with the necessary skills and knowledge.Getting Attendees to Turn Up for Training:One of the challenges of conducting training sessions is ensuring attendance. Steve provides some helpful tips and tricks to encourage trainees to be actively engaged and eager to participate in training programs.Overcoming Industry Challenges:The flooring industry has its own set of challenges, and Steve sheds light on some of the most common hurdles people face in the field. He also offers advice on how to tackle these challenges effectively.The Best Advice Steve Ever Received:Throughout his career, Steve has received valuable advice from mentors and peers. He shares the best piece of advice he ever received, which has guided him both professionally and personally.Favorite Products to Work With:As a seasoned flooring expert, Steve reveals his favourite products to work with. Whether it's for durability, ease of installation, or stunning aesthetics, he provides recommendations that flooring professionals and DIY enthusiasts will find valuable.Conclusion:We hope you enjoyed this insightful episode with Steve Davies, where we explored his journey from a flooring professional to a renowned trainer. Don't forget to visit our website at https://theukflooringpodcast.co.uk/ for more episodes and updates!Stay tuned for our next episode, where we'll dive into the latest trends in flooring design and innovation.Remember to subscribe and leave us a review on your favourite podcast platform.Connect with us on social media @UKFlooringPodcast to join the conversation and suggest future topics and guests. Hosted on Acast. See acast.com/privacy for more information.

Welcome to the very first episode of Sherna Talks Beauty, it only seemed right that my first guest would be none other than Bronwyn Conway, National Training Manager for Clarins Ireland, who also happens to be my sister and my best friend. Growing up with Bronwyn, I've witnessed first-hand her unwavering passion and dedication to the beauty industry, since graduating from the Bronwyn Conroy Beauty School aged 19, she has had a hugely successful career and is a well-respected voice in the beauty industry.Her role as the National Training Manager for Clarins Ireland showcases her immense talent, expertise, and the legacy she carries as the daughter of our esteemed mum Bronwyn Conroy.In this episode, she reveals what ignited her passion for beauty, and the changes she has seen over the years. She also brings us on her own skincare journey and her experience of rosacea during lockdown and the importance of seeking professional help. And of course, it goes without saying, there's lots of chat about Clarins, including how to achieve that coveted radiant glow and the new Clarins Boutique in Dublin. Enjoy! This week's episode is brought to you by Beauty Complex, your collagen super supplement from Revive Active. Beauty Complex is more than just a collagen supplement, it's a collagen super supplement containing a unique combination of marine collagen, hyaluronic acid and phytoceramides, all in one easy-to-take powdered sachet. Just add water! To find out more talk to your local health food store, pharmacy or visit www.reviveactive.com Hosted on Acast. See acast.com/privacy for more information.

Robert “Sonny” McDonald is the Senior National Training Manager for Toyo Tires Corp USA. He started his sales career in the tire industry as a representative for The Tire Rack, where he worked for over a decade, and has been in his current position for more than 20 years. Sonny has also served as an aircraft maintenance specialist in the US Air Force. In this episode… As anyone who works in the tire and auto repair industry will tell you, customers don't come to your shop because things are going well — if their car and tires were in good shape, they wouldn't be in your shop. So what steps can you take to ensure your customers will stay happy in unhappy situations? How can you get them to trust you enough to come back to your shop the next time they need help? According to Robert “Sonny” McDonald from Toyo Tires Corp USA, it starts with great training. His philosophy: when you're more comfortable with something, the easier it is to sell. When a customer service provider can ask the right questions, the more comfortable the customer will feel. Sonny says great training gets people excited, not only about the industry but about what they do. On this episode of Gain Traction, Mike Edge welcomes Sonny for a conversation about all the ways the tire and auto repair industry benefits when its employees receive stellar training. Sonny shares how he came to appreciate the benefits of training, how it makes customers feel more comfortable, and why employees feel great about their jobs when they are well-trained. He also reveals which 1980's TV show led to him being called “Sonny” instead of Robert. Don't miss it! Here's a glimpse of what you'll learn:  Robert “Sonny” McDonald's origin story The Notre Dame football eras Sonny most enjoyed having season tickets for How Sonny got started in the tire business What makes the sales team at Toyo Tires successful? The keys to consistency in the tire industry Sonny shares how he, as a college student, got to know Tire Rack founder Peter Veldman Why people started calling him “Sonny” instead of Robert Resources mentioned in this episode: Robert “Sonny” McDonald on LinkedIn  Toyo Tires   Peter Veldman, Tire Rack Founder Traction Summit 2023 Smithers  Mike Edge on LinkedIn Tread Partners Sponsor for this episode... This episode is brought to you by Tread Partners.  At Tread Partners, we provide digital marketing for multi-location tire dealers and auto repair shops.  By using our strategy, branding, and marketing services, we help shops sell more tires and put more cars in bays.   We've helped companies like Action Gator Tire, Colony Tire and Service, and Ulmer's Auto Care Center bring extreme growth in paid leads, ROI, and searches.  So, what are you waiting for? Visit www.treadpartners.com or email info@treadpartners.com to learn more. 

John McClain (yes, you read that right) is a 3 Gun competitive shooter who arguably has the best wardrobe in the game. John is recently new to big game hunting as well and has put in a ton of time learning how to harvest his own deer. John also is the National Training Manager at Armscor and is a sponsored shooter with Vortex Optics, Voodoo Tactical, Hunters HD Gold, and has worked hard to get to where he's at now. In this episode, we talk competitive shooting, hunting, and more! The Reticle Up is produced in partnership with AmericanFirearms.org. American Firearms' mission is to recommend what works. We believe everyone deserves access to unbiased, helpful information about firearms -- and our buying guides, product reviews, and learning resources are designed to help real people find the stuff that will work best for them. Check us out at www.americanfirearms.org Be sure to subscribe to the Reticle Up Podcast wherever you get your podcasts from. Leave us a review online and be sure to follow us on social media! Follow the host at @3gunkenzie on Instagram, Facebook, and YouTube. --- Support this podcast: https://podcasters.spotify.com/pod/show/mckenzie-fitzpatrick/support

Jef McCurdy is the National Training Manager at Castagra.   In this episode of Specified Growth Podcast, Jef talks about his career journey and how he got started in the roofing industry. He also discusses the importance of providing training opportunities in the trades, learning and growing from your failures, developing the Castagra training program from scratch, and so much more. Don't miss this episode of Specified Growth Podcast!   Please reach out if you have any feedback or questions. Enjoy!    Twitter: @TatsuyaNakagawa Instagram: @tats_talks LinkedIn: Tatsuya Nakagawa  YouTube: Tats Talks www.tatstalk.com www.castagra.com Learn more about your ad choices. Visit megaphone.fm/adchoices

Today we're talking to Larry Guy, Senior Instructor and National Training Manager at Allstate Dealer Services; and we discuss implementing education technology to accelerate learning; the psychology of sales; and why it's crucial to continually question best practices. All of this right here, right now, on the Modern CTO Podcast! Check out more of Larry and Allstate at https://allstatedealerservices.com/

Washington State off road buggy racer Roger Caddell sits down with Wes  to talk about his experiences racing in Canada over the years. Everything from the 4 race Stadium series and other short course races to long distance desert racing for years in Kamloops BC. In this episode, we briefly talk about AimSports, where Roger is the National Training Manager. I had to cut a bunch out for time purposes, but I  now realize how the Aim computer system can help racers on so many levels. Make sure to check them out at www.aimsports.com 15% off Brightsource Lights with cod 4x4canada10% off TOC Supplies with code 4x4canada 10% off WildMedKits with code 4x4canada 10% off Afraid Knot Ropes with code 4x4canada23 10% off Miolle Gear with code 4x4 Make sure to check us out on Facebook and Instagram!

This week DJ sits down with Nick Brown the Vice President of Marketing and Larry McGough the National Training Manager at SVS Sound.  SVS makes highest quality speakers and subwoofers that far outperform their price tag.  But DJ wants to know how they test their speakers and subs and boy does he get an answer.  Nick and Larry know their stuff, you have to hear this to believe it!Push Play and see/hear for yourself.ENJOY!To find more about SVS Sound go to:Twitter: @SVS_SoundWebsite: svsound.comTo Help Support the Podcast you can sign up for a Monthly Donation HERE to become a Patreon Member

This week DJ sits down with Nick Brown the Vice President of Marketing and Larry McGough the National Training Manager at SVS Sound.  SVS makes highest quality speakers and subwoofers that far outperform their price tag.  But DJ wants to know how they test their speakers and subs and boy does he get an answer.  Nick and Larry know their stuff, you have to hear this to believe it!Push Play and see/hear for yourself.ENJOY!To find more about SVS Sound go to:Twitter: @SVS_SoundWebsite: svsound.comTo Help Support the Podcast you can sign up for a Monthly Donation HERE to become a Patreon Member

On this episode, we speak with National Training Manager for Samsung Canada, Jeff Ingram. Jeff talks us through the all-digital CES and the latest TV technology that's coming out of Samsung. YourTechReport is a weekly radio show which airs on SiriusXM channel 167 Sundays at 1pm Eastern. Listen with the SiriusXM App http://ed.gr/cveyg. See omnystudio.com/listener for privacy information.

Dan, Bill and Maddie talk about their holidays and discuss Skills Ontario programs and initiatives for January 2021. Dan welcomes Gold Partner Fix Auto to the podcast and sits with Rob Blenkarn, Owner of Fix Auto Brockville, to discuss Rob's pathway into becoming an Auto Body Technician. Dan also speaks with Sophie Pépin, National Training Manager for Fix Auto, to discuss various training opportunities with Fix Auto.

Episode 74 – Bobby Bassett on Retirement and his Training Career Bobby Bassett is a name many technicians and shop owners will recognize. He’s been one of the most well-known trainers in the industry during his time as National Training Manager for North America for Gates, and was most recently honored with the AWDA Excellence in Education Award. He’s also recently retired, so we thought it would be a good time to catch up with Bobby to share his wisdom and commitment to a lifetime of service to the automotive service industry. Listen in as Bobby discusses:· Gratitude for the recognition he’s received throughout the years.· His recent retirement from Gates.· His role as Chairman of the Board of ASE.· The Gates Tools for Schools Program he managed.· How he got into training at Gates and grew the program globally.· His support for training through the ASE Education Foundation· The growing importance of training to keep up with vehicle technology.· How working together with instructors can help secure our future.· How Gates Global training helps identify common problems· His advice on how you can get involved and pay it forward.

Plug yourself in, pick up your mug of coffee, and let's go. National Training Manager of Acorn Christian Foundation, Howard Fleming, asks and explores how fears and filters might prevent us from enjoying God's healing and bringing it to others. Support the show (https://www.give.net/AcornCF)

Watch the original video version. https://youtu.be/oLBgDWp7iLc Learn how you can harness the ultimate expression of sound through the build and audio quality of an integrated amplifier. Join industry insider, Phil Shea, to learn how these stunning, dynamic instruments provide unparalleled musical expression, using the new A-S series of integrated amplifiers from Yamaha as the example. Phil Shea, National Training Manager at Yamaha --- Send in a voice message: https://anchor.fm/dailyhifi/message Support this podcast: https://anchor.fm/dailyhifi/support

What's the difference between cologne, eau de toilette and eau de parfum?Hello and welcome to Beauty Island.The special mini series of Beauty Isolation will be dropping from next week, where I talk to beauty friends new and old about their beauty routines in quarantine.Today I’m excited to share a little bonus episode with you all about fragrance and gifting fragrance. I got on the phone with expert Ruth Stonier, National Training Manager at Clarins Fragrance & Beauty, who’s job it is to discover, train, educate and recommend the best fit fragrances. It applies to finding one for yourself, and for a gift, but of course may be particularly helpful with Mother’s Day coming up.We talked about why perfume is so strongly linked to memories, the difference between cologne and eau de toilette and eau de parfum, and where do you start when it comes to working out the right perfume to gift?*WIN* - I also have a perfume prize pack to give away for you or for you mum. Enter here: https://mailchi.mp/cc7f4e9dd51f/beautyislandfragranceRead: 16 People Share The Perfume That Reminds Them of Their Mum.Follow host Brittany Stewart:Instagram: @brittanybeautybts @beautyislandpodcastEmail: beautyislandpodcast@gmail.comSubscribe to It's A Beauty! Newsletter for no BS beauty reviews, tips and tricks. (It's free!)Perfumes mentioned:Perfumes available to purchase at Myer or David Jones.Chanel No.5: https://bit.ly/2WTX7pJ4711: https://bit.ly/2z5h6YIVersace Dylan Blue Pour Femme EDP: https://bit.ly/2VWcJrDVersace Eros Pour Femme EDT: https://bit.ly/3daZEk8Amo Ferragamo EDP: https://bit.ly/2YBYo5kFerragamo Signorina Ribelle EDP: https://bit.ly/35qcmZFShop Clarins fragrances: https://www.clarins.com.au/body-treatment-fragrances/360/Sound effects obtained from ZapsplatMusic: Dexter Britain

Maddie Pimentel has been in the Learning & Development field for the past 19 years. She joined SnapAV last year as the Training and Development Manager for North America. Maddie’s role is to enable the sales teams to quickly ramp, begin generating revenue and stay up to date on products, solutions and process updates as well as industry trends. With the purchase of Control4, a publicly-traded company, a few months ago, Maddie is now responsible for sales enablement for the global sales teams. Prior to this, she was with NCR Corporation, AT&T, Hearst Media Services and Carrera Commerce in various roles, including Global Sales Enablement, National Training Manager, Inside and Outside Sales Manager as well as Corporate Marketing Manager. Maddie is fluent in Spanish and earned a BA in Communications from Georgia State University. She has also worked as a reporter and interpreter with several media outlets in the Atlanta market. Maddie was born in Havana, Cuba and moved to Atlanta with her family when she was two months old. Her interests include writing, reading, traveling, and photography. If you want your sales team to deliver results, discover the secrets of sales coaching and learn about the hottest trends in the sales training industry, take 20 minutes to learn from this incredibly successful business leader.  WHAT YOU WILL LEARN IN THIS EPISODE: The role of storytelling in human to human connection Top 3 critical skills for salespeople Is it difficult to train salespeople? The value of building companywide Storytelling Library Latest trends in the sales training industry SHOW NOTES [00:22] Introduction [01:42] Welcome Maddie [02:00] Business stories that inspire Maddie [02:51] How her father got started [03:13] Winning business of the year award [05:52] Maddie’s portfolio [06:02] How she got into sales [06:53] Critical skills for salespeople [07:08] Relationship building [07:22] Listening [07:33] Customer’s needs assessment [09:34] Is it difficult to train salespeople? [10:49] Net promoter score [11:16] Maddie’s process of training salespeople [11:40] Current trends in sales training [11:56] Mobile and gamification [14:56] The on-boarding program at Snap AV  [17:05] Type of stories that excite customers [19:00] The meaning of Story library [20:20] Challenges facing today’s sales leaders [20:34] Keeping up with the technology [22:00] The Art of storytelling [22:53] Contact info  You can reach Maddie at  Maddie.pimentel@yahoo.com  www.linkedin.com/in/maddiepimentel

In this episode of The Modern Medic, we chat with Matt Pepper: Matt served 7 years in the Australian Army, working across a number of combat corps roles and graduating from the Royal Military College, Duntroon and the Australian Defence Force Academy as an Army Officer. In 2006 he moved across to emergency services, where he has worked across multiple Australian ambulance services as a Special Operations/Intensive Care Paramedic and Special Operations Team/Rescue Instructor. He jointly established the Tactical Medical Operations capability in New South Wales Ambulance and was integral in the raising of the first full-time Tactical Paramedic Team in Australia, before moving on to become the service's inaugural Clinical Training Officer for Tactical Medicine. Other notable career highlights include: Founding President of the Australian Tactical Medical Association Editorial Board, Journal of High Threat and Austere Medicine Master of Philosophy, Prehospital response to terrorism Graduate Diploma, Disaster response and preparedness Bachelor of Health Science, Paramedicine Bachelor of Arts, History Churchill Fellowship, 2015, International Models and Innovation in Tactical Emergency Medical Support NSW Health Clinical Excellence Commission Scholarship for Patient Safety, 2018, Clinical Governance and Interagency Collaboration in Tactical Medical Operations Qualified SWAT Medic (International School of Tactical Medicine), and Certified Tactical Paramedic (TP-C, International Board of Specialty Certifications) Matt joined TacMed Australia as National Training Manager in January 2020. You can learn more about TacMed at www.tacmedaustralia.com.au ATMA: www.atma.net.au The Modern Medic: www.themodernmedic.com

This week in the hot seat is Brendan Hughes, National Training Manager at Penrite Oil to provide some answers to Common Oil FAQ's and tell us about Penrites 10 Tenths Racing Range

An audio replay of the SIXTEENTH #ASKJIM Facebook Live Q & A with the founder and CEO of the Jim's Group, Jim Penman, Haydar Hussein (Jim's Cleaning Group Founder) and Joel Kleber. Big thanks to Mike Davenport (Jim's National Training Manager) who suggested to do the show in front of the prospective franchiee's at the training. Our first full-length guest was Haydar Hussein the founder of Jim's Group. We had our prospective franchise owners read out their own questions to Jim and Haydar. #ASKJIM is on WEDNESDAY nights at 7 PM AEST via the Jim's Group - Head Office Facebook Page. You can watch all the video replays via http://bit.ly/askjimreplays To learn more about Jim's Group visit https://jims.net/ or call 131 546 To learn more about Jim visit https://jims.net/meet-jim/ Follow Jim on Facebook, Instagram, Twitter and Linkedin @thejimpenman Follow Jim's Group on Facebook, Instagram, YouTube, Twitter and Linkedin. --- Send in a voice message: https://podcasters.spotify.com/pod/show/jimsgroup/message

It's no secret that we're big fans of Grand Seiko here, so this week's episode was a real treat for us. Ilya sits down with Joe Kirk, the National Training Manager for Grand Seiko Corporation of America, to talk about everything Grand Seiko, and to answer all your burning Grand Seiko questions submitted on Instagram.  This week's episode of the Worn & Wound Podcast is brought to you by Hamilton and their Intra-Matic Automatic Chronograph, a recreation of an iconic timepiece first released in 1968. Hamilton has reimagined that watch with a piece that retains the vintage styling of the original while adding modern function and wearability. Powering the Intra-Matic Automatic Chronograph is an H-31 automatic chronograph movement with an extended 60-hour power reserve. The case of the Intra-Matic has also been scaled to 40mm for modern tastes, and the panda dial colorway is available in both blue and black variants. To learn more about Hamilton's new Intra-Matic Automatic Chronograph, head to shop.hamiltonwatch.com. Show Notes Grand Seiko USA Grand Seiko USA Instagram Joe's Instagram Joe's Grand Seiko Ref. SBGC203 Joe's Grand Seiko Ref. SBGJ203 Ilya's Junghans Max Bill Grand Seiko hands getting heat-blued Worn & Wound review of the Ref. SBGM221 9S Mechanical 9F Quartz 9R Spring Drive Shizuku-Ishi Watch Studio Zaratsu polishing Hands-On with the Grand Seiko Elegance Collection (Refs. SBGK002, SBGK004, SBGK005, and SBGK006) Grand Seiko Spring Drive 8-Day Power Reserve Grand Seiko Elegance Collection with the new 9R02 caliber RSVP for Joe's lecture at the HSNY

Above Picture from left: Monte Hamsher, Bob Pattengale and John Marcum Monte Hamsher owner of Performance Motor Werks, technician and automotive instructor at Fort Myers Technical College Bob Pattengale is the National Training Manager at Bosch. Bob has over 30 years of automotive experience with stops at OE Dealerships, independent repair shops, technician training, and equipment sales.  Bob is a contributing writer for Motor Magazine. Bob also served as the SAE Service Technician’s Society President in 2001 and 2002. Look for Bob’s Previous Episodes (https://remarkableresults.biz/?s=bob+pattengale) . John Marcum is the Director of Marketing for Federated Auto Parts.   Key Talking Points: Monte Hamsher- shop owner, technician and automotive teacher Need more training for service professionals to speed up the process for ordering correct parts Receiving current training from AVI on demand and NAPA classes- difficulties getting more people to training The commitment of the technician is key- willingness to learn and be better technicians For those who don’t-can, you change commitment by offering training? Bob Pattengale- National Training Manager at Bosch Teaching and training parts supplier from a manufacturer’s perspective Kids play video games- problem solvers but don’t have tactile skills Younger age group look for mentors than online classes- need physical skill built up John Marcum- Director of Marketing for Federated Auto Parts Rely on manufacturing partners to provide training for parts professionals Trained professional more efficient and saves time and money Continue to develop a personal relationship with customers- provide the best service for you, how can we help you become better educated, how can we get parts to you faster, quality of parts   Suggest quality product to customers- help technician know the  benefits and value of quality lines “What if every technician took a week off?”- What would happen? Motivate people in and outside of industry the importance of technicians Providing safe and reliable transportation for others Resources: Thanks to Monte Hamsher, John Marcum, and Bob Pattengale for their contribution to the aftermarket’s premier podcast. Link to the ‘BOOKS‘ page highlighting all books discussed in the podcast library  (https://remarkableresults.biz/books/) . Leaders are readers. Leave me an honest review on iTunes (https://airtable.com/tblOgQmbnkHekpl0L/viwSbPkieMNhLOmtK/recQNomCKr1D5I9x4) . Your ratings and reviews really help and I read each one of them. (http://eepurl.com/bhqME9) Be socially involved and in touch with the show: Speaking (https://remarkableresults.biz/speaking) Subscribe to a mobile listening app (https://remarkableresults.biz/app/) . (https://remarkableresults.biz/app/) This episode is brought to you by AAPEX, the Automotive Aftermarket Products Expo. AAPEX represents the $740 billion global automotive aftermarket industry and has everything you need to stay ahead of the curve. With 2,500 exhibiting companies, you’ll see the latest products, parts, and technologies for your business. The event also offers advanced training for shop owners, technicians, warehouse distributors (WDs) and auto parts retailers, as well as networking opportunities to grow your business. AAPEX 2019 will take place Tuesday, Nov. 5 through Thursday, Nov. 7, at the Sands Expo in Las Vegas. More than 48,000 targeted buyers are expected to attend, and approximately 162,000 automotive aftermarket professionals from 135 countries are projected to be in Las Vegas during AAPEX 2019. For information, visit  (http://aapexshow.com.)

Your Learning Curve Never Sounded So Good Ryan Kooiman joined Standard Motor Products full time as a Technician Training Developer in 2010. Previously he was the lead tech/driveability specialist at a 20 bay independent shop in Michigan. He is the founder of West Michigan Auto Repair Society, chairman of the MI chapter of SAE, has attended numerous ASE test writing workshops. He has appeared on TV shows such as the CBS Early Show and co-hosted Car and Driver Radio along with Road and Track Radio. Ryan brings his years of hands-on experience in the shop to the audience in a manner they can relate to and put to use immediately. In early 2013, Ryan was promoted to manager of the Professional Training Seminars training group, overseeing the scheduling and the work of the SMP training staff.  In December 2013, Ryan was promoted to Director of Training.  In this role, Ryan oversees the operations of the SMP Corporate Training Center in Irving, TX; oversees the operations and development of the Pro Training group, as well as works closely with the Marketing and Product teams at SMP to ensure that their products and promotions are what they need to be for the automotive technician. Check out Ryan’s other episodes (https://remarkableresults.biz/?s=ryan+kooiman) . Bob Pattengale is the National Training Manager for Bosch. Bob has over 30 years of automotive experience with stops at OE Dealerships, independent repair shops, technician training, and equipment sales.  Bob is a contributing writer for Motor Magazine. Bob also served as the SAE Service Technician’s Society President in 2001 and 2002. Jon Forro is the owner of AST and an automotive Instructor. Key Talking Points: Accessing specific training needs will become the primary goal of all trainers, shop owners, and technicians. Going into training with a pre-assessment helps determine the strengths and weaknesses on the topic/subject. You find out the specific needs of the students. Coming out you will find out what you learned These pre and post assessments will show the value of the training need and investment No more certificates of attendance. Student earns a certificate of achievement based on a test of the class material. Bosh is doing this. Standard has three training options: Leader-led and hands-on On-Line Open House Introductions Finding the right classes continues to be a challenge. There is a larger need than the training available. On-line training is a strong option. Shop owner needs the courage to find their individual technician’s skill set and find the right training to fill that gap and invest in the training. The technician needs the courage to assess their competency and work on their skills as a professional. Technicians need to increase their responsibility to improve their value to their profession and have the desire to learn as much as they can The student must absorb the knowledge and then put the new learning into play in their work. Practicing the principles from any training helps solidify the new training. Do homework and show the shop owner you learned the material You will not remember everything in a seminar. You’ve got to re-read and put the theory into practice Bob Pattengale learned that the ‘Why’ of everything he did as a technician was most important to his ability to learn. Commitment comes from the shop owner, the technician and the trainer Does the shop have the proper tools that reflect the training that is provided? Do not rule out ‘basic training’. A refresher course on basic electricity could be a game changer for even the most seasoned technician. Basic principles in electricity is necessary or you will be stuck as the future unfolds. Legacy technicians may not go to a basic electricity class because their ego won’t let them. In this case they do on-line training. Being able to interpret data is...

Matt speaks with Rob Taylor, the National Training Manager for Stanley Black and Decker University about silica dust and OSHA dust compliance guidelines and how that can and will impact the tools you use. You will learn more about silica dust and who is susceptible to this type of exposure and why each job needs a silica dust exposure plan for grinding or drilling. Rob is a wealth of knowledge on this subject and we are thrilled to be able to share it with all our customers.

Before you go out and buy that new TV ask yourself a couple questions: Is a 65" TV big enough for my room or should i get a 120" projector. The answer might surprise you. Take a listen as we speak with Karol Warminiec, National Training Manager for Sony Canada.

In chatting with Karol Warminiec, National Training Manager for Sony Canada, we asked: What is the optimal distance to be from your new 4K TV?

Licence Free Group Fitness Programs For Clubs  Benefits to clubs and instructors *Use Current Equipment *No Music Knowledge Required *All Ages And Fitness Levels Can Participate *CEC Points Available *PPCA Music Free Mark has over 20 years industry experience teaching a variety of workout styles from freestyle to pre-choreographed. From 2005-2010 Mark was the National Training Manager, Master Trainer and worked on the program design team for Radical Fitness. During this time Mark was mentored by some of the best in the group fitness business.Since 2010 he has put this experience to use developing his brand, fitness programs, and media profile. Mark has contributed to numerous magazines as a health and fitness expert, and his workouts are taught in GF studios and views on several online platforms including Jillian Michaels FITFUSION.   Please Click The Links To Visit Mark On Facebook Or Email Mark  mark@markmoonfitness.com   https://www.facebook.com/markmoonfitcoach/?timeline_context_item_type=intro_card_work&timeline_context_item_source=621047302 https://www.facebook.com/markwmoon    

Roger Caddell talks about his background with data acquisition in motorsport, as the National Training Manager of AIM Sports LLC.We talk about how racers can become more comfortable with understanding data acquisition, and some insights on how data can be used as a tool to improve, rather than a 'lie detector'Key Links - AIM Sports Data Analysis Training Courses (YouTube) - https://goo.gl/ugDxQY

It’s fun to have Christa Watson back from ChristaQuilts to talk about her 2nd book on machine quilting. (we talked about her first book on Sept 14) plus she has some great tips for us to day and we get to hear about the projects she will do with American Patchwork & Quilting in 2017! https://christaquilts.com/ ==================== I love my Baby lock machine and I want you to learn more about what Baby lock has going on, and the best person to talk to is my friend Linda Rainwater, the National Training Manager. Linda overseas the education and know absolutely everything about the machine. http://babylock.com/ ============== Catching up with Author, fabric designer and master quilter Angela Walters today. She has been busy in the last year or so doing several books, opening a store front and maybe a few other things! I wanted to find out about writing a not one, but TWO collaboration books with different people. . quiltingismytherapy.com =================== Each month this year Mary Abreu of Confessions of a craft addict joined me so we can talk about in depth on topics we quilters want to know about! First some quick to make gift ideas, as we quilters always have that one last thing’ we want to make. And we’ll chat about creating sewing & quilting goals for 2017. https://www.instagram.com/thatcraftaddict/ ================ visit American Patchwork & Quilting at http://allpeoplequilt.com Facebook - https://www.facebook.com/apqmagazine Visit host Pat Sloan at http://www.patsloan.com

CliffCentral.com — Miss Pru chats about sexuality with the cast of 'Six Inches' and gets inside info from National Training Manager of Col'Cacchio, Roslyn Mommsen, on how they are taking training to new digital heights. She also touches on financial planning with Nhlanhla Sibanyoni and Ayanda Msibi from MS Wealth. DJ Miz pops in to round off the show with his new track, 'Count Your Blessings'.