Podcasts about Shapeways

Marleen Vogelaar was Shapeways' first CFO and came back to save the firm from bankruptcy. She takes us through the drama and effort to rebound the firm and grow it once again. What is their strategy to be? What markets will they target, what technologies will they use, and where will they invest? Will the firm focus on consumers, businesses, manufacturing, or prototypes? Will the company look at series manufacturing and more assembly operations, or stick to what others do? On the whole, this is an exciting set of experiences and a well-informed look into the future of Additive Manufacturing.

Welcome to Episode 28 of Printing Money.  For this one Danny is joined by our own, Joris Peels (Executive Editor, 3DPrint.com). This crossover-pod is indeed quite meta-level but it's not entirely new – some months ago Danny appeared on Joris' own podcast, the 3DPOD.  We encourage you to listen to that episode as well. Episode 28 begins with an introduction to Joris, and a look at his nearly two decades in 3D printing. From Philips to Shapeways, to Materialise and Formlabs, and consulting across the industry, Joris has some reach, to say the least. Next, Danny and Joris review RAPID, the largest 3DP/AM event in the USA, which took place earlier this month in Detroit. The cautiously optimistic tone that has been 2025 was decidedly in force at RAPID, and oh by-the-way there was a noticeable presence from the Chinese brands, tariffs or not. From RAPID the conversation shifts to geopolitics, the regulatory environment, and yes, tariffs. Amongst the analysis are some great quotables to look for, including “Manufacturing itself is a weapons system,” and “Uncertainty is the new normal,” all amidst a whole lot of 3DP/AM industry food for thought. And all that is only the first half. In the second half of the episode, Danny and Joris dive into Printing Money's raison d'etre - deals and analysis! Specifically, this episode focuses on recent M&A, including coverage of the Nano Dimension-Desktop Metal-Markforged tie-up, BICO's new direction under Maria Forss, Fictiv's eye-catching acquisition by Misumi, and the trend of traditional Japanese manufacturers embracing 3DP/AM. Please enjoy Episode 28 and check out our previous episodes too. This episode was recorded April 24, 2025. Timestamps: 00:12 – Welcome to Episode 28, and welcome to Joris Peels! 00:42 – 3DP/AM since 2008: Joris through the years 03:17 – RAPID 2025 review 06:08 – Were the Chinese booths at RAPID 2025 the largest? 07:09 – Some notable startups at RAPID 2025 were not the flashiest: Manifest Technologies, PanOptimization, Euler, and more 08:48 – Geopolitics and the 3D printing industry 11:29 – European financial markets: Rheinmetall, BAE, were amongst top Q1 performers 12:22 – Direct impacts from geopolitics can hit 3D printing deals 13:58 – 3D Printed Drone Swarms: Has the industry accepted its role in defense? 16:12 – Manufacturing itself is a weapons system 17:52 – Tariffs and the 3D printing industry 21:40 – Uncertainty is the new normal 23:44 – Regulatory hurdles to reshoring 25:15 – Is M&A coming back? 26:22 – Fictiv to be acquired by Misumi (TSE: 9962) for $350M 29:45 – Fictiv's valuation and Misumi's valuation versus, say that of Xometry (XMTR) 32:14 – Desktop Metal (DM) officially acquired by Nano Dimension (NNDM), and  Markforged is (MKFG) next 36:57 – BICO (STO: BICO) selling MatTek and Visikol to Sartorius (ETR: SRT3) for $80M 40:45 – Fortissimo's $120M investment in Stratasys has been completed 41:03 – nTop acquires cloudfluid 45:22 – Fabrisonic acquired by UPM, an O'Neal Industries company 49:18 – Sodick to full acquire Prima Additive 55:12 – The Japanese machine tool industry: Nidec attempting to takeover Makino 58:45 – Japanese manufacturers helping to bridge 3DP/AM into tradiitonal manufacturing (Nikon SLM Solution, Seiko Epson, DMG Mori, Sodick, JEOL, Nidec, and more…) 1:01:25 – Thanks to Joris and thanks to our audience for listening to Episode 28 of Printing Money 1:02:02 – Disclaimer Disclaimer: This content is for informational purposes only, you should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer or any third-party service provider to buy or sell any securities or other financial instruments in this or in any other jurisdiction in which such solicitation ...

Welcome to Printing Money Episode 26!  For this episode, Danny is joined by Dayton Horvath, Director of Emerging Technology at AMT (and Printing Money alum!). Danny and Dayton had some quality time to plan this episode, having both just been at Additive Manufacturing Strategies a couple weeks ago.  And the planning was needed, because there have been a lot of noteworthy deals not just in the last month, but also some in Q4 which we hadn't had time to cover. Danny and Dayton start off by reviewing AMS 2025.  Speeches by Stratasys CEO Yoav Zeif, AM Research's Scott Dunham, and The Barnes Global Advisors' John Barnes are all referenced as the additive manufacturing (AM) “industry” struggles to establish its value and confronts its status as a standalone (or not?) technology. Next, drawing upon AMT data, Dayton takes us through the 2024 year that was in 3D printing M&A and investment (Hint… not a great year!).   Danny and Dayton also highlight some of the most notable 2024 deals. Then Danny and Dayton jump into Printing Money's bread and butter, analyzing recent deals across the 3D printing landscape.  Some themes include software companies buying simulation companies, a continuing focus on AM for military and defense, and AUKUS, more specifically Australia. Please enjoy Episode 26, and check out our prior episodes. This episode was recorded February 18, 2025. Timestamps: 00:14 – Welcome Dayton Horvath (AMT) to Episode 26 00:33 – Additive Manufacturing Strategies 2025 review 01:22 – Specialization vs generalization for AM solutions 02:26 – AM fits in the manufacturing ecosystem, not on an island 02:56 – John Barnes: “Stop calling it ‘postprocessing' --- it's just ‘processing' a04:30 – A continuing focus on defense for AM 05:20 – The focus on defense zoomed in even more the following week at MILAM 06:10 – 2024 3DP/AM investments, through the lens of AMT: A big drop! 08:32 – 2024 3DP/AM M&A, through the lens of AMT: A consistent number of deals, but how good were they? 10:33 – Notable M&A in 2024: ADDMAN and KAM 10:58 – Software buys simulation, Part 1: Synopsys (SNPS) and Ansys (ANSS) 11:25 – Status of the Nano Dimension (NNDM) acquisitions of Desktop Metal (DM) and Markforged (MKFG). Shareholder letter issued in January. 12:06 – Software buys simulation, Part 2: Siemens (SIEGY) to acquire Altair (ALTR) 14:30 – 3D Systems (DDD) sells Geomagics to Hexagon (HXGBY) 16:40 – Shapeways acquires Thangs 17:32 – BICO (CLLKF) continues to divest, sells Nanoscribe to LAB14 for EUR 26M 20:11 – KTI-G (KTG.ASX) set to acquire and rebrand to Metal Powder Works 25:25 – GoEngineer acquires CAD MicroSolutions 27:18 – American Axel Manufacturing (AXL) acquiring GKN Metallurgy and GKN Automotive 31:50 – Stratasys (SSYS) to receive $120M investment from Fortissimo Partners 34:58 – Backflip raises $30M for text to 3D print software 37:12 – Axial3D raises $18M for AI-driven medical 3DP software 41:00 – Amaero receives $23.5M loan from US Import-Export Bank, and AUD $22M Private Placement 44:22 – AML3D (AL3.ASX) receives AUD $30M financing 45:44 – Firehawk Aerospace raises $60M from Donald Trump, Jr. (sort of…) 49:10 – Aspect Biosystems raises $115B Series B for bioprinting 49:56 – Sintavia receives $10M debt financing from Stifel North America and ASTRO America 52:53 – Mighty Buildings seeks an exit 53:24 – Toyota invests $44M in Interstellar 53:35 – AscendArc raises $4M 53:47 – Eric Schmidt invests in Relativity Space 54:45 – Thanks again to Dayton Horvath 55:21 – Disclaimer Disclaimer: This content is for informational purposes only, you should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer or any third-party service provider to buy or sell any...

On this episode of the Additive Insight podcast, we're joined by Shapeways CEO Marleen Vogelaar and COO Jule Witte. Six months ago, the pair were part of a new management team that set about rescuing the Shapeways business in the Netherlands after the company filed for bankruptcy. As they join us on the Additive Insight podcast, they explain why they felt compelled to step in to save the business, how they went about it, and the services Shapeways is able to offer today as a result. They also discuss the importance of obtaining the Shapeways brand, acquiring the Thangs 3D file sharing platform, and their vision for the company moving forward.

Welcome to 2025, and welcome to Printing Money Episode 25!  For this episode Danny welcomes back a couple of previous guests: Arno Held (AM Ventures) and startup advisor Tali Rosman. It's a new year so, naturally, this episode has its share of reflecting on the 2024 that was and the 2025 (and beyond) that will be. Danny, Arno, and Tali start off by harkening back one last time to Formnext – what is traditionally the end of the 3D printing year turned out only to be a prelude to a whole lot of industry-shifting news in December. So yes, Danny, Arno and Tali discuss Shapeways' rebirth, Forward AM's insolvency, Velo's restructuring, voxeljet's go-private. And this is all really interesting, but it's only the appetizer. Next, Episode 25 wades into the deep end, analyzing and opining on the goings-on with Nano Dimension. Will the acquisitions of Desktop Metal and Markforged happen? Will the shareholder activists force the company to unwind? And what's this about tin foil hats and Russian oligarchs? After the Nano Dimension discussion, Episode 25 moves on to review some of 2024's venture capital raises, including a few recent ones.  Then, Danny, Arno and Tali consider the current artificial intelligence (AI) revolution and how it might dovetail with what's to come for additive manufacturing (AM) this year and further into the future. Please enjoy Episode 25, and please join Danny, Arno, Tali, and your other favorite Printing Money personalities at AM Strategies next month, Feb 4-6 in New York City. This episode was recorded January 8, 2025. Timestamps: 00:14 – Welcome to Episode 25 00:31 – Welcome back to Arno Held (AM Ventures) and Tali Rosman 01:21 – Reflections on Formnext and summing up 2024 03:48 – BASF Forward AM insolvency filing 05:11 – So much happened after Formnext! 07:38 – Shapeways reborn 09:14 – Velo3D (VLDX) restructured 11:31 – Voxeljet acquired by its investor, Anzu Partners 12:10 – Whither Nano Dimension (NNDM), Desktop Metal (DM), and Markforged (MKFG)? 13:11 – A pile of cash, shareholder activism, lawsuits… 15:01 – russianoligarchs.com (That's not a typo!) 17:32 – The Oerlikon (OERLY) connection 21:45 – What should/could Nano Dimension do? 26:35 – Siemens to acquire Altair, 3D Systems selling Geomagic to Hexagon 28:23 – Buyers' market: VC into AM has dropped 80% in twenty-four months 30:33 – Broad themes for 2025: M&A is coming back, Reshoring is now, Materials in focus 35:10 – Fabri raises $5M for investment casting 36:33 – Industrializing AM technology: Conflux raises $11M Series B 38:23 – AM Ventures and HZG Group co-invest on Spectroplast 39:43 – HZG invests in Craftcloud/All3DP 40:31 – AI in the 3D printing industry 41:46 – 1000 Kelvin and Euler deploy AI to 3DP/AM 45:27 – The next wave for 3DP/AM has already gotten started 47:02 – Come meet us at AMS (Feb 4-6 in NYC)! 47:43 – Thanks to Arno and Tali! Disclaimer: This content is for informational purposes only, you should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer or any third-party service provider to buy or sell any securities or other financial instruments in this or in any other jurisdiction in which such solicitation or offer would be unlawful under the securities laws of such jurisdiction.  The information on this podcast is of a general nature that does not address the circumstances and risk profile of any individual or entity and should not constitute professional and/or financial advice. Referenced transactions are sourced from publicly available information.

On the final Additive Insight episode of the year, TCT Head of Content Laura Griffiths and Group Content Manager Sam Davies get together to discuss the biggest trends and developments in AM over the last 12 months. They discuss: - Why Nano Dimension is acquiring both Desktop Metal & markforged, as well as the pressure Nano faces from a vocal shareholder. - BMW's successful application of additive manufacturing, with more than 400,000 parts now being 3D printed per year. - The rise, fall and rise again of Shapeways as two of the original co-founders revive the brand in the wake of its bankruptcy this summer. - Increased investment in the aerospace and defence sectors, with the likes of GKN Aerospace and GE Aerospace pumping tens and hundreds of millions into its AM efforts. - Forward AM's insolvency filing and where the company goes next. - And their personal highlights covering the AM sector.

Shapeways, F&E Andros and QWTs

Shapeways is Back?

Like sands through the hourglass, so is the Q2 2024 earnings season.  All of the publicly traded 3D printing companies have reported their financials, so it is time to welcome back Cantor Fitzgerald Managing Director Troy Jensen to discuss and analyze the numbers. Problematic balance sheets and challenging operating environments serve as a backdrop for some negative themes including strategic reviews, slashed operating expenses, and dwindling market capitalizations. But it's not all gloom and doom. Nikon SLM Solutions continues to experience growth, and some services and software providers performed well enough too.  And through it all, the additive manufacturing (AM) industry is still growing, so Danny and Troy point to some of the private companies where growth seems apparent. AM Research has more than a decade of historical data on private and public 3D printing companies alike and can certainly back up Danny and Troy's thoughts on the privates. Please enjoy Episode 21, and, if you are at IMTS this week, come find Danny, and Troy, and the 3DPrint.com and AM Research teams, all of which will be presenting on either the Formnext Stage or at the Investor Forum. Timestamps: 00:21 – Welcome back, Troy Jensen (Cantor Fitzgerald) 00:50 – See us live at IMTS! 01:32 – Q2 2024 earnings themes 02:20 – 3D Systems (DDD) Q2 2024 (and Q1 2024) earnings 04:55 – Cost cutting at 3D Systems, and some nice new industrial sales, but a dwindling valuation 08:06 – Stratasys (SSYS) Q2 2024 earnings 09:43 – Stratasys sues Bambu Labs 12:01 – Stratasys' strategic review 14:28 – Inkbit, AM Craft, and Stratasys' strategy 15:57 – Speculation: Let Nano Dimension (NNDM) acquire Desktop Metal (DM), and then merge with Nano Dimension? 17:16 – Desktop Metal (DM) Q2 2024 earnings 21:32 – Markforged (MKFG) Q2 2024 earnings 23:00 – Speculation: Should Markforged tie-up with Continuous Composites? 25:25 – Impossible Objects impresses at RAPID 26:15 – Velo3D (VLD) Q2 2024 earnings 26:42 – Nikon SLM Solutions Q2 growth 27:33 – ADDMAN to acquire KAM 28:27 – Speculation: This is the quarter that we find out what happens to Velo3D 30:24 – Reshoring: Nikon SLM rebrands Morf3D into Nikon AM Synergy 31:36 – Formlabs launches Form 4 32:42 – Materialise (MTLS) Q2 2024 earnings 33:58 – Materialise acquires FEops 36:21 – Proto Labs (PRLB) Q2 2024 earnings 36:58 – Xometry (XMTR) Q2 2024 earnings 37:43 – IMTS Investor Forum 38:28 – Shapeways' Netherlands unit gets a bid 39:00 – Q3 2024 earnings preview and episode wrap-up Disclaimer: This content is for informational purposes only, you should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer or any third-party service provider to buy or sell any securities or other financial instruments in this or in any other jurisdiction in which such solicitation or offer would be unlawful under the securities laws of such jurisdiction.  The information on this podcast is of a general nature that does not address the circumstances and risk profile of any individual or entity and should not constitute professional and/or financial advice. Referenced transactions are sourced from publicly available information.    

Like sands through the hourglass, so is the Q2 2024 earnings season.  All of the publicly traded 3D printing companies have reported their financials, so it is time to welcome back Cantor Fitzgerald Managing Director Troy Jensen to discuss and analyze the numbers. Problematic balance sheets and challenging operating environments serve as a backdrop for some negative themes including strategic reviews, slashed operating expenses, and dwindling market capitalizations. But it's not all gloom and doom. Nikon SLM Solutions continues to experience growth, and some services and software providers performed well enough too.  And through it all, the additive manufacturing (AM) industry is still growing, so Danny and Troy point to some of the private companies where growth seems apparent. AM Research has more than a decade of historical data on private and public 3D printing companies alike and can certainly back up Danny and Troy's thoughts on the privates. Please enjoy Episode 21, and, if you are at IMTS this week, come find Danny, and Troy, and the 3DPrint.com and AM Research teams, all of which will be presenting on either the Formnext Stage or at the Investor Forum. Timestamps: 00:21 – Welcome back, Troy Jensen (Cantor Fitzgerald) 00:50 – See us live at IMTS! 01:32 – Q2 2024 earnings themes 02:20 – 3D Systems (DDD) Q2 2024 (and Q1 2024) earnings 04:55 – Cost cutting at 3D Systems, and some nice new industrial sales, but a dwindling valuation 08:06 – Stratasys (SSYS) Q2 2024 earnings 09:43 – Stratasys sues Bambu Labs 12:01 – Stratasys' strategic review 14:28 – Inkbit, AM Craft, and Stratasys' strategy 15:57 – Speculation: Let Nano Dimension (NNDM) acquire Desktop Metal (DM), and then merge with Nano Dimension? 17:16 – Desktop Metal (DM) Q2 2024 earnings 21:32 – Markforged (MKFG) Q2 2024 earnings 23:00 – Speculation: Should Markforged tie-up with Continuous Composites? 25:25 – Impossible Objects impresses at RAPID 26:15 – Velo3D (VLD) Q2 2024 earnings 26:42 – Nikon SLM Solutions Q2 growth 27:33 – ADDMAN to acquire KAM 28:27 – Speculation: This is the quarter that we find out what happens to Velo3D 30:24 – Reshoring: Nikon SLM rebrands Morf3D into Nikon AM Synergy 31:36 – Formlabs launches Form 4 32:42 – Materialise (MTLS) Q2 2024 earnings 33:58 – Materialise acquires FEops 36:21 – Proto Labs (PRLB) Q2 2024 earnings 36:58 – Xometry (XMTR) Q2 2024 earnings 37:43 – IMTS Investor Forum 38:28 – Shapeways' Netherlands unit gets a bid 39:00 – Q3 2024 earnings preview and episode wrap-up Disclaimer: This content is for informational purposes only, you should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer or any third-party service provider to buy or sell any securities or other financial instruments in this or in any other jurisdiction in which such solicitation or offer would be unlawful under the securities laws of such jurisdiction.  The information on this podcast is of a general nature that does not address the circumstances and risk profile of any individual or entity and should not constitute professional and/or financial advice. Referenced transactions are sourced from publicly available information.    

Another month, another episode of Printing Money. For Episode 20, Danny is joined by Rajeev Kulkarni. Rajeev worked at 3D Systems for more than twenty-five years, the last number of which saw him at the forefront of a plethora of asset sales and acquisitions. Now, Rajeev is on his own and works with three 3D printing startups: Axtra3D, Caracol, and Ackuretta.  We are thankful to have Rajeev for this episode and we are sure you the listener will appreciate it too. The previous episode featured Cantor's Troy Jensen and therefore centered on quarterly earnings reports. The episode prior to that, we had Mark Burnham from the Additive Manufacturing Coalition to discuss their DC fly-in.  So, it's been some time since we've focused on deals and market activity, and this episode had plenty to cover. In Episode 20 of Printing Money Danny and Rajeev discuss: Nano Dimension's (NNDM) announced acquisition of Desktop Metal (DM) BASF's spin out of Forward AM,  Formlabs buying a company mid-Kickstarter campaign, VC raises including  Mantle, Rapid Liquid Print, and Inkbit, financial doings from Divergent, the death of Shapeways, and plenty more. Please enjoy Episode 20! Timestamps: 00:22 – Welcome to our guest, Rajeev Kulkarni 01:15 – Rajeev's career history: From 25 years at 3D Systems 03:55 – A company of many platforms 06:40 – M&A at 3D Systems 09:02 – Is consolidation the answer? 12:56 – The composites industry as analog for the 3DP/AM industry 16:03 – Scalability, market penetration, and (ensuing) profitability 18:43 – Nano Dimension (NNDM) to acquire Desktop Metal (DM) 25:48 – More consolidation shoes to drop?  Or collaboration? Or closure? 28:27 – Twenty-seven 3D printing startups in eight countries 31:54 – BASF spins out Forward AM 37:07 – Formlabs acquires Micronics mid-Kickstarter campaign 39:07 – Sinterit raises $1.85M bridge round 40:00 – Tech Soft 3D acquires Actify 41:45 – NSL Analytical acquired by PE firm Levine Leichtman 41:58 – Indurate Alloys acquired by Wall Colmonoy 42:22 – Materialise acquires FEops 43:42 – Mantle raises $20M Series C 45:59 – Inkbit raises $19M round including strategic Ingersoll Rand 48:14 – Rapid Liquid Print raises $7M led by HZG and BMW Ventures 49:30 – Quantica raises EUR 20M 50:57 – Scrona raises $5M round 52:13 – Divergent3D receives $47M term loan from Bridge Bank 54:32 – Stratasys invests in AM Craft 56:42 – Solideon raises $5M 57:22 – Craft Health raises $1M bridge round 57:42 – Sanofi invests in CTIBiotech 57:55 – RIP Shapeways 1:01:22 – AM Research publishes Q1 2024 3DP/AM market data; 8% year over year growth 1:03:01 – Thank you to Rajeev, and closing remarks Disclaimer: This content is for informational purposes only, you should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer or any third-party service provider to buy or sell any securities or other financial instruments in this or in any other jurisdiction in which such solicitation or offer would be unlawful under the securities laws of such jurisdiction.  The information on this podcast is of a general nature that does not address the circumstances and risk profile of any individual or entity and should not constitute professional and/or financial advice. Referenced transactions are sourced from publicly available information.

This week, a solo stream, all about the market consolidation. From the @Shapeways bankruptcy, the @Formlabs acquisition of @micronics3d , @NanoDimension buying @DesktopMetal , and @printedsolid starting to produce @Prusa3D 's Prusament. LOTS to talk about! ALSO, we will be giving away from Printed Solid JESSIE FILAMENT. Check the pinned chat comment! Looking for a stream to watch after we finish our stream, check out @SteveBuilds 's latest stream: https://www.youtube.com/live/mARXHxwHxP8 __________________________________ Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com/podcast and someone will get you set up to be a guest!

On this episode of the Additive Insight podcast, we're joined by CADchat CEO Graham Bredemeyer. Having previously worked at Shapeways and set up the DLP 3D printing firm Collider, Bredemeyer has been working in additive manufacturing for more than a decade. His latest venture, however, sees him branching out to the rest of the manufacturing space too. As CEO of CADchat, Bredemeyer and his team have developed a cloud-based digital workspace that can better foster collaboration in product development. After launching the business earlier this year, Bredemeyer joins the Additive Insight podcast to discuss the motivation behind the platform, how the software works, and the impact it has already had at GE Vernova. We also discuss Essentium's acquisition of his Collider business and get his thoughts on the progress being made in AM.

Welcome to Episode 144 Sponsored by CultTVMan, Sean's Custom Model Tools and Return To Kit FormHostsStuartGeoffTerryThanks to our latest Patreon and Buy Me a Coffee Supporters:Check out our What We Like page for lists of what we like.***************************************LATEST NEWSWe are taking a break until Sept.Shapeways has filed for bankruptcy.***************************************MAILBAGWe want to hear from you! Let us know if you have any comments or suggestions scalemodelpodcast@gmail.com.***************************************LATEST HOBBY ANNOUNCEMENTSItaleri in JulyICM August Meng's new 1/72nd scale American M142 HIMARSHanriot HD.1 in 1:16 scaleSH72501 Seafire FR Mk.47 Seafire FR MK.47Hasegawa coming soonWhat's new at Scalemates.com***************************************SPONSOR AD #1Cult TV Man***************************************WHAT'S ON THE BENCHStuart - More work on the Yamato. Turrets and put 2 out of the 3 decks on. After this will be the after-market wood deck.[foogallery id="3791"]Also more being bad at the Broughdale Hobby sale. A “Brian Lane' Mk 1 Spitfire in 1/32nd, a partially started Matchbox 1/32 Lysander and a Tamiya 1/12 Suzuki RG250 Motorcycle. Never done a bike kit so that will be interesting. Coming soon - Where will Stuart display all these?

About a decade ago, entrepreneur Graham Bredemeyer started Collider, a company that combined the best of 3D printing with injection molding. Now he runs CADChat, which hopes to make sharing and discussing CAD files more social. The young entrepreneur also talks about his time at Zverse, Shapeways, Adaxis, and Essentium. This episode of the 3DPOD provides a look into entrepreneurship and a new generation that is more "3D printing native" than the engineers from before.

This episode is a bonus episode, brought to you in partnership with Nyoo ("New") Health. Nyoo hosts the "What's Nyoo!" series, with monthly events that bring together women and experts to have engaging, honest, and educational conversations about women's health, and this one is all about Pelvic Health. This event blew us away, and we knew we had to share it. Special thanks to Priya Bathija - CEO of Nyoo - for allowing us to share this recording. We hope you enjoy it just as much as we did!Remember to like, rate and subscribe and enjoy the episode!Guest biosPriya Bathija is a nationally-recognized healthcare leader, attorney, and policy expert. She is currently Founder and CEO of Nyoo Health, an organization dedicated to improving health and healthcare for women. Previously, she was at the American Hospital Association where she led policy efforts and strategic initiatives on value, health equity and maternal health. She started her career as a healthcare attorney and served as in-house counsel and a member of the leadership teams at ProMedica and MedStar Health. Priya is also a Distinguished Practitioner in Residence at The Ohio State University Moritz College of Law and an adjunct professor at Loyola University Chicago School of Law. In addition, she serves as a public board member for the American Board of Medical Specialties, the largest physician-led specialty certification organization in the U.S.Carine Carmy is CEO and Co-Founder at Origin, the leading provider of pelvic floor and women's physical therapy. She has focused her career on increasing access to products and services that improve lives, from healthcare to 3D printing. Carine's passion for women's health started in her twenties, when she struggled with painful sex for nearly a decade.  Following years of misdiagnoses, ineffective treatment options, and hearing “that's just the way it is,” Carine discovered the power of pelvic floor physical therapy to treat, not only pelvic pain, but dozens of conditions and symptoms that impact some 40 million U.S. women and individuals with vaginal anatomy, every year. Already a go-to-market leader in healthcare and technology — with leadership roles at Amino, Shapeways, MarketspaceNext and Monitor Group — she felt compelled to help make pelvic health the norm for women across the country. Outside of Origin, Carine is an avid writer and has been published in MIT Technology Review, Forbes, Ad Age, and PSFK, and serves as an advisor to startups and nonprofits in support of diversity and economic equality.Dr. Somi Javaid is a board-certified OB/GYN, leading women's sexual health thought leader, and menopause advocate. She is the Founder and Chief Medical Officer of HerMD, a team on a mission to make women's healthcare exceptional by educating, advocating for, and empowering patients to take control of their health concerns. Dr. Javaid has been featured in Forbes, Vogue, Well+Good, InStyle, Parents, Refinery29, Mashable, Adweek, and Popsugar. In August 2020 Dr. Javaid spoke about Gender Bias and the Female Sexual Health Revolution on the TEDx mainstage, and in January 2021 she was featured in Women on Topp for her work as a trailblazer and pioneer in women's sexual health.Dr. Rachel Rubin is a board-certified urologist and sexual medicine specialist. She is an assistant clinical professor of Urology at Georgetown University and owns her private practice in the Washington DC region. She is one of only a handful of physicians fellowship trained in male and female sexual medicine. Dr. Rubin is a clinician, researcher, and vocal educator in the field of sexual medicine. In addition to being education chair for the International Society for the Study of Women's Sexual Health (ISSWSH), she also serves as an Associate Editor for the Journal Sexual Medicine Reviews. Her work has been featured in the NYT and PBS.Emma Schmidt, PhD, is a doctor in Clinical Sexology, a Professional Clinical Counselor, Supervisor, and Certified Sex Therapist, Supervisor through the American Association for Sex Educators Counselors and Therapists (AASECT) as well as the American Board for Christian Sex Therapists (ABCST). She is the owner of Emma Schmidt and Associates in Cincinnati, Indian and Kentucky, a therapy group practice which focuses on sex and relationship therapy. Dr. Schmidt received her Bachelor of Arts in Biblical Studies and Psychology as well as a Master of Arts in Counseling from Cincinnati Christian University. She received her Doctorate from Modern Sex Therapy Institutes. Her research and publications have focused on female sexual pain.Organization bioNyoo Health provides strategic and advisory support to startups, investors, providers, and others as they grow and scale new ways of delivering health and healthcare to women. Beyond that, Nyoo Health is building a movement that will redefine women's health and investing in women as they advocate for themselves in the healthcare system.FemTech Focus Podcast bioThe FemTech Focus Podcast is brought to you by FemHealth Insights, the leader in Women's Health market research and consulting. In this show, Dr. Brittany Barreto hosts meaningfully provocative conversations that bring FemTech experts - including doctors, scientists, inventors, and founders - on air to talk about the innovative technology, services, and products (collectively known as FemTech) that are improving women's health and wellness. Though many leaders in FemTech are women, this podcast is not specifically about female founders, nor is it geared toward a specifically female audience. The podcast gives our host, Dr. Brittany Barreto, and guests an engaging, friendly environment to learn about the past, present, and future of women's health and wellness.FemHealth Insights bioLed by a team of analysts and advisors who specialize in female health, FemHealth Insights is a female health-specific market research and analysis firm, offering businesses in diverse industries unparalleled access to the comprehensive data and insights needed to illuminate areas of untapped potential in the nuanced women's health market.Episode ContributorsPriya BathijaLinkedIn: @Priya Bathija Carine CarmyLinkedIn: @Carine Carmy & @OriginInstagram: @carinerachelle & @theoriginway Dr. Somi JavaidLinkedIn: Somi Javaid, MD & HerMDInstagram: @somijavaidmd & @hermdhealth Dr. Rachel RubinLinkedIn: @Rachel RubinInstagram: @drrachelrubin Dr. Emma SchmidtLinkedIn: @Dr. Emma SchmidtInstagram: @heyemmatherapy Nyoo HealthWebsite: https://www.nyoohealth.com/LinkedIn: @Nyoo HealthInstagram: @nyoohealth  Dr. Brittany BarretoLinkedIn:  @Brittany Barreto, Ph.D.Twitter: @DrBrittBInstagram: @drbrittanybarreto FemTech Focus PodcastWebsite: https://femtechfocus.org/LinkedIn: https://www.linkedin.com/company/femtechfocusTwitter: @FemTech_FocusInstagram: @femtechfocus FemHealth InsightsWebsite: https://www.femhealthinsights.com/LinkedIn: @FemHealth Insights

The deals didn't take a break over the summer, as Alex and Danny have plenty to discuss in this July episode of Printing Money. Applications increasingly take centre stage as Conformis is acquired by restor3D, and Lightforce raise an impressive Series D, showing maturity in the medical and dental fields; while Sintavia and Agile Space attracted funding showing strength in the aerospace and space sector. Broader economic conditions are still precipitating events as Sakuu cancelling their SPAC and Shapeways doing a reverse stock split, while the offers on Stratasys keep rolling in and the speculation deepens with the latest SEC filings and an about face from Stratasys. 1.07: Conformis is acquired by restor3D 7.32: CADS Additive acquired by Hexagon 11.45: What is the difference between M&A and VC/investment? 18.32: Sintavia receives strategic investment from Lockheed Martin 25.20: Albert Invent raises $7.5 million seed round 29.55: Chromatic3D raise venture funding 32.02: PostProcess raises bridge round of $1.4 million 34.02: AIM3D raises undisclosed amount 36.58: FononTech raises €2.3 million 39.10: Agile Space raises $13.85 million in a combined seed round 42.22: Replique raises seed round 44.02: Sakuu terminates SPAC with Plum Acquisition Corp. 45.25: Shapeways reverse stock split 48.34: Round up of Stratasys offers from 3D Systems and Nano Dimension This content is for informational purposes only, you should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer or any third-party service provider to buy or sell any securities or other financial instruments in this or in any other jurisdiction in which such solicitation or offer would be unlawful under the securities laws of such jurisdiction.  The information on this podcast is of a general nature that does not address the circumstances and risk profile of any individual or entity and should not constitute professional and/or financial advice. 

Additive manufacturing is a dynamic space for various reasons: The technology is advancing and application possibilities are still being developed, and as a direct consequence, the landscape of AM companies is subject to change due to investor moves; mergers and acquisitions; and startups emerging from “stealth mode.” On this podcast, and in related reporting for Additive Manufacturing Media, we serve manufacturers by covering AM technology and applications — the corporate and financial moves are not the focus. And yet, one realm affects the other. The company moves shape what we cover and affect the choices of manufacturers as they aim to proceed with the technology. In this episode of AM Radio, Peter Zelinski and Stephanie Hendrixson talk about this. They discuss how the corporate and financial developments among AM companies play out for AM users, and where the dynamism of the additive space is likely to lead in the future. This episode of AM Radio is brought to you by Formnext Forum: Austin. Mentioned in this episode: Stratasys and Desktop Metal Other recent company moves: Ultimaker and Makerbot; Markforged and Digital Metal; Shapeways and Linear AMS; Nexa3D and Addifab AM provider Zeda opening new facility Tangible Solutions built its process on machines from Concept Laser. Concept has since been acquired and Tangible has been acquired. RP+M succeeding with FDM, its initial process Facilities with space to add more additive capacity: GKN in Michigan; Wabtec in Pittsburgh; Collins Aerospace in Charlotte HP binder jetting, and HP Corvallis legacy developments such as first laptop Fortify applications to mold tooling and radio frequency devices Evolve STEP process Stratasys and Origin work together, then join Dayton Horvath on AM investor shift toward applications Subscribe to THE BUILDUP, our newsletter on 3D printing for industrial production

Josh Wolfe co-founded Lux Capital to support scientists and entrepreneurs who pursue counter-conventional solutions to the most vexing puzzles of our time in order to lead us into a brighter future. The more ambitious the project, the better—like, say, creating matter from light. Wolfe is a director at Shapeways, Strateos, Lux Research, Kallyope, CTRL-labs, Variant, and Varda, and helped lead Lux Capital's investments in Anduril, Planet, Echodyne, Clarifai, Authorea, Resilience, and Hadrian. He is a founding investor and board member with Bill Gates in Kymeta, which makes cutting-edge antennas for high-speed global satellite and space communications. In this presentation, Wolfe shares the principles that guide his entrepreneurship and investments, giving examples from companies he has founded and funded.

One of the hardest parts of telling any history, is which innovations are significant enough to warrant mention. Too much, and the history is so vast that it can't be told. Too few, and it's incomplete. Arguably, no history is ever complete. Yet there's a critical path of innovation to get where we are today, and hundreds of smaller innovations that get missed along the way, or are out of scope for this exact story. Children have probably been placing sand into buckets to make sandcastles since the beginning of time. Bricks have survived from round 7500BC in modern-day Turkey where humans made molds to allow clay to dry and bake in the sun until it formed bricks. Bricks that could be stacked. And it wasn't long before molds were used for more. Now we can just print a mold on a 3d printer.   A mold is simply a block with a hollow cavity that allows putting some material in there. People then allow it to set and pull out a shape. Humanity has known how to do this for more than 6,000 years, initially with lost wax casting with statues surviving from the Indus Valley Civilization, stretching between parts of modern day Pakistan and India. That evolved to allow casting in gold and silver and copper and then flourished in the Bronze Age when stone molds were used to cast axes around 3,000 BCE. The Egyptians used plaster to cast molds of the heads of rulers. So molds and then casting were known throughout the time of the earliest written works and so the beginning of civilization. The next few thousand years saw humanity learn to pack more into those molds, to replace objects from nature with those we made synthetically, and ultimately molding and casting did its part on the path to industrialization. As we came out of the industrial revolution, the impact of all these technologies gave us more and more options both in terms of free time as humans to think as well as new modes of thinking. And so in 1868 John Wesley Hyatt invented injection molding, patenting the machine in 1872. And we were able to mass produce not just with metal and glass and clay but with synthetics. And more options came but that whole idea of a mold to avoid manual carving and be able to produce replicas stretched back far into the history of humanity. So here we are on the precipice of yet another world-changing technology becoming ubiquitous. And yet not. 3d printing still feels like a hobbyists journey rather than a mature technology like we see in science fiction shows like Star Trek with their replicators or printing a gun in the Netflix show Lost In Space. In fact the initial idea of 3d printing came from a story called Things Pass By written all the way back in 1945! I have a love-hate relationship with 3D printing. Some jobs just work out great. Others feel very much like personal computers in the hobbyist era - just hacking away until things work. It's usually my fault when things go awry. Just as it was when I wanted to print things out on the dot matrix printer on the Apple II. Maybe I fed the paper crooked or didn't check that there was ink first or sent the print job using the wrong driver. One of the many things that could go wrong.  But those fast prints don't match with the reality of leveling and cleaning nozzles and waiting for them to heat up and pulling filament out of weird places (how did it get there, exactly)! Or printing 10 add-ons for a printer to make it work the way it probably should have out of the box.  Another area where 3d printing is similar to the early days of the personal computer revolution is that there are a few different types of technology in use today. These include color-jet printing (CJP), direct metal printing (DMP), fused deposition modeling (FDM), Laser Additive Manufacturing (LAM, multi-jet printing (MJP), stereolithography (SLA), selective laser melting (SLM), and selective laser sintering (SLS). Each could be better for a given type of print job to be done. Some forms have flourished while others are either their infancy or have been abandoned like extinct languages. Language isolates are languages that don't fit into other families. Many are the last in a branch of a larger language family tree. Others come out of geographically isolated groups. Technology also has isolates. Konrad Zuse built computers in pre-World War II Germany and after that aren't considered to influence other computers. In other words, every technology seems to have a couple of false starts. Hideo Kodama filed the first patent to 3d print in 1980 - but his method of using UV lights to harden material doesn't get commercialized.  Another type of 3d printing includes printers that were inkjets that shot metal alloys onto surfaces. Inkjet printing was invented by Ichiro Endo at Canon in the 1950s, supposedly when he left a hot iron on a pen and ink bubbled out. Thus the “Bubble jet” printer. And Jon Vaught at HP was working on the same idea at about the same time. These were patented and used to print images from computers over the coming decades. Johannes Gottwald patented a printer like this in 1971. Experiments continued through the 1970s when companies like Exxon were trying to improve various prototyping processes. Some of their engineers joined an inventor Robert Howard in the early 1980s to found a company called Howtek and they produced the Pixelmaster, using hot-melt inks to increment the ink jet with solid inks, which then went on to be used by Sanders Prototype, which evolved into a company called Solidscape to market the Modelmaker. And some have been used to print solar cells, living cells, tissue, and even edible birthday cakes. That same technique is available with a number of different solutions but isn't the most widely marketable amongst the types of 3D printers available. SLA There's often a root from which most technology of the day is derived. Charles, or Chuck, Hull coined the term stereolithography, where he could lay down small layers of an object and then cure the object with UV light, much as the dentists do with fillings today. This is made possibly by photopolymers, or plastics that are easily cured by an ultraviolet light. He then invented the stereolithography apparatus, or SLA for short, a machine that printed from the bottom to the top by focusing a laser on photopolymer while in a liquid form to cure the plastic into place. He worked on it in 1983, filed the patent in 1984, and was granted the patent in 1986.  Hull also developed a file format for 3D printing called STL. STL files describe the surface of a three-dimensional object, geometrically using Cartesian coordinates. Describing coordinates and vectors means we can make objects bigger or smaller when we're ready to print them. 3D printers print using layers, or slices. Those can change based on the filament on the head of a modern printer, the size of the liquid being cured, and even the heat of a nozzle. So the STL file gets put into a slicer that then converts the coordinates on the outside to the polygons that are cured. These are polygons in layers, so they may appear striated rather than perfectly curved according to the size of the layers. However, more layers take more time and energy. Such is the evolution of 3D printing. Hull then founded a company called 3D Systems in Valencia California to take his innovation to market. They sold their first printer, the SLA-1 in 1988. New technologies start out big and expensive. And that was the case with 3D Systems. They initially sold to large engineering companies but when solid-state lasers came along in 1996 they were able to provide better systems for cheaper.  Languages also have other branches. Another branch in 3d printing came in 1987, just before the first SLA-1 was sold.  Carl Deckard  and his academic adviser Joe Beaman at the University of Texas worked on a DARPA grant to experiment with creating physical objects with lasers. They formed a company to take their solution to market called DTM and filed a patent for what they called selective laser sintering. This compacts and hardens a material with a heat source without having to liquify it. So a laser, guided by a computer, can move around a material and harden areas to produce a 3D model. Now in addition to SLA we had a second option, with the release of the Sinterstation 2500plus. Then 3D Systems then acquired DTM for $45 million in 2001. FDM After Hull published his findings for SLA and created the STL format, other standards we use today emerged. FDM is short for Fused Deposition Modeling and was created by Scott Crump in 1989. He then started a company with his wife Lisa to take the product to market, taking the company public in 1994. Crump's first patent expired in 2009.  In addition to FDM, there are other formats and techniques. AeroMat made the first 3D printer that could produce metal in 1997. These use a laser additive manufacturing process, where lasers fuse powdered titanium alloys. Some go the opposite direction and create out of bacteria or tissue. That began in 1999, when Wake Forest Institute of Regenerative medicine grew a 3D printed urinary bladder in a lab to be used as a transplant. We now call this bioprinting and can take tissue and lasers to rebuild damaged organs or even create a new organ. Organs are still in their infancy with success trials on smaller animals like rabbits. Another aspect is printing dinner using cell fibers from cows or other animals. There are a number of types of materials used in 3D printing. Most printers today use a continuous feed of one of these filaments, or small coiled fibers of thermoplastics that melt instead of burn when they're heated up. The most common in use today is PLA, or polylactic acid, is a plastic initially created by Wall Carothers of DuPont, the same person that brought us nylon, neoprene, and other plastic derivatives. It typically melts between 200 and 260 degrees Celsius. Printers can also take ABS filament, which is short for acrylonitrile-butadien-styerene. Other filament types include HIPS, PET, CPE, PVA, and their derivative forms.  Filament is fed into a heated extruder assembly that melts the plastic. Once melted, filament extrudes into place through a nozzle as a motor sends the nozzle on a x and y axis per layer.  Once a layer of plastic is finished being delivered to the areas required to make up the desired slice, the motor moves the extruder assembly up or down on a z axis between layers. Filament is just between 1.75 millimeters and 3 millimeters and comes in spools between half a kilogram and two kilograms. These thermoplastics cool very quickly. Once all of the slices are squirted into place, the print is removed from the bed and the nozzle cools off. Filament comes in a number of colors and styles. For example, wood fibers can be added to filament to get a wood-grained finish. Metal can be added to make prints appear metallic and be part metal.  Printing isn't foolproof, though. Filament often gets jammed or the spool gets stuck, usually when something goes wrong. Filament also needs to be stored in a temperature and moisture controlled location or it can cause jobs to fail. Sometimes the software used to slice the .stl file has an incorrect setting, like the wrong size of filament. But in general, 3D printing using the FDM format is pretty straight forward these days. Yet this is technology that should have moved faster in terms of adoption. The past 10 years have seen more progress than the previous ten though. Primarily due to the maker community. Enter the Makers The FDM patent expired in 2009. In 2005, a few years before the FDM patent expired, Dr. Adrian Bowyer started a project to bring inexpensive 3D printers to labs and homes around the world. That project evolved into what we now call the Replicating Rapid Prototyper, or RepRap for short.  RepRap evolved into an open source concept to create self-replicating 3D printers and by 2008, the Darwin printer was the first printer to use RepRap. As a community started to form, more collaborators designed more parts. Some were custom parts to improve the performance of the printer, or replicate the printer to become other printers. Others held the computing mechanisms in place. Some even wrote code to make the printer able to boot off a MicroSD card and then added a network interface so files could be uploaded to the printer wirelessly. There was a rising tide of printers. People were reading about what 3D printers were doing and wanted to get involved. There was also a movement in the maker space, so people wanted to make things themselves. There was a craft to it. Part of that was wanting to share. Whether that was at a maker space or share ideas and plans and code online. Like the RepRap team had done.  One of those maker spaces was NYC Resistor, founded in 2007. Bre Pettis, Adam Mayer, and Zach Smith from there took some of the work from the RepRap project and had ideas for a few new projects they'd like to start. The first was a site that Zach Smith created called Thingiverse. Bre Pettis joined in and they allowed users to upload .stl files and trade them. It's now the largest site for trading hundreds of thousands of designs to print about anything imaginable. Well, everything except guns. Then comes 2009. The patent for FDM expires and a number of companies respond by launching printers and services. Almost overnight the price for a 3D printer fell from $10,000 to $1,000 and continued to drop. Shapeways had created a company the year before to take files and print them for people. Pettis, Mayer, and Smith from NYC Resistor also founded a company called MakerBot Industries. They'd already made a little bit of a name for themselves with the Thingiverse site. They knew the mind of a maker. And so they decided to make a kit to sell to people that wanted to build their own printers. They sold 3,500 kits in the first couple of years. They had a good brand and knew the people who bought these kinds of devices. So they took venture funding to grow the company. So they raised $10M in funding in 2011 in a round led by the Foundry Group, along with Bezos, RRE, 500 Startups and a few others. They hired and grew fast. Smith left in 2012 and they were getting closer and closer with Stratasys, who if we remember were the original creators of FDM. So Stratasys ended up buying out the company in 2013 for $403M. Sales were disappointing so there was a changeup in leadership, with Pettis leaving and they've become much more about additive manufacturing than a company built to appeal to makers. And yet the opportunity to own that market is still there. This was also an era of Kickstarter campaigns. Plenty of 3D printing companies launched through kickstarter including some to take PLA (a biodegradable filament) and ABS materials to the next level. The ExtrusionBot, the MagicBox, the ProtoPlant, the Protopasta, Mixture, Plybot, Robo3D, Mantis, and so many more.  Meanwhile, 3D printing was in the news. 2011 saw the University of Southhampton design a 3d printed aircraft. Ecologic printing cars, and practically every other car company following suit that they were fabricating prototypes with 3d printers, even full cars that ran. Some on their own, some accidentally when parts are published in .stl files online violating various patents.  Ultimaker was another RepRap company that came out of the early Darwin reviews. Martijn Elserman, Erik de Bruin, and Siert Wijnia who couldn't get the Darwin to work so they designed a new printer and took it to market. After a few iterations, they came up with the Ultimaker 2 and have since been growing and releasing new printers  A few years later, a team of Chinese makers, Jack Chen, Huilin Liu, Jingke Tang, Danjun Ao, and Dr. Shengui Chen took the RepRap designs and started a company to manufacturing (Do It Yourself) kits called Creality. They have maintained the open source manifesto of 3D printing that they inherited from RepRap and developed version after version, even raising over $33M to develop the Ender6 on Kickstarter in 2018, then building a new factory and now have the capacity to ship well over half a million printers a year. The future of 3D Printing We can now buy 3D printing pens, over 170 3D Printer manufacturers including 3D systems, Stratasys, and Ceality but also down-market solutions like Fusion3, Formlabs, Desktop Metal, Prusa, and Voxel8. There's also a RecycleBot concept and additional patents expiring every year.  There is little doubt that at some point, instead of driving to Home Depot to get screws or basic parts, we'll print them. Need a new auger for the snow blower? Just print it. Cover on the weed eater break?  Print it. Need a dracolich mini for the next Dungeons and Dragons game? Print it. Need a new pinky toe. OK, maybe that's a bit far. Or is it? In 2015, Swedish Cellink releases bio-ink made from seaweed and algae, which could be used to print cartilage and later released the INKREDIBLE 3D printer for bio printing. The market in 2020 was valued at $13.78 billion with 2.1 million printers shipped. That's expected to grow at a compound annual growth rate of 21% for the next few years. But a lot of that is healthcare, automotive, aerospace, and prototyping still. Apple made the personal computer simple and elegant. But no Apple has emerged for 3D printing. Instead it still feels like the Apple II era, where there are 3D printers in a lot of schools and many offer classes on generating files and printing.  3D printers are certainly great for prototypers and additive manufacturing. They're great for hobbyists, which we call makers these days. But there will be a time when there is a printer in most homes, the way we have electricity, televisions, phones, and other critical technologies. But there are a few things that have to happen first, to make the printers easier to use. These include: Every printer needs to automatically level. This is one of the biggest reasons jobs fail and new users become frustrated. More consistent filament. Spools are still all just a little bit different. Printers need sensors in the extruder that detect if a job should be paused because the filament is jammed, humid, or caught. This adds the ability to potentially resume print jobs and waste less filament and time. Automated slicing in the printer microcode that senses the filament and slices. Better system boards (e.g. there's a tool called Klipper that moves the math from the system board on a Creality Ender 3 to a Raspberry Pi). Cameras on the printer should watch jobs and use TinyML to determine if they are going to fail as early as possible to halt printing so it can start over. Most of the consumer solutions don't have great support. Maybe users are limited to calling a place in a foreign country where support hours don't make sense for them or maybe the products are just too much of a hacker/maker/hobbyist solution. There needs to be an option for color printing. This could be a really expensive sprayer or ink like inkjet printers use at first We love to paint minis we make for Dungeons and Dragons but could get amazingly accurate resolutions to create amazing things with automated coloring.  For a real game changer, the RecycleBot concept needs to be merged with the printer. Imagine if we dropped our plastics into a recycling bin that 3D printers of the world used to create filament. This would help reduce the amount of plastics used in the world in general. And when combined with less moving around of cheap plastic goods that could be printed at home, this also means less energy consumed by transporting goods. The 3D printing technology is still a generation or two away from getting truly mass-marketed. Most hobbyists don't necessarily think of building an elegant, easy-to-use solution because they are so experienced it's hard to understand what the barriers of entry are for any old person. But the company who finally manages to crack that nut might just be the next Apple, Microsoft, or Google of the world.

On the latest instalment of our Innovators on Innovators series, Tangible Solutions Director of Engineering Matt Shomper is joined by DfAM consultant Duann Scott. On the agenda today is computational design, with Matt leaning on his 10+ years experience in the medical device market, and Duann on his learnings from the likes of Shapeways, Autodesk and nTopology. Throughout the conversation, the pair discuss design best practices, the significance of designing parameters as well as parts, and the design tools currently on the market.

Albert Wenger (Managing Partner, Union Square Ventures) is imaginative, focused, and passionate. We talk about his book “The World After Capital” where he argues that technological progress has shifted scarcity for humanity. When we were foragers, food was scarce. During the agrarian age, it was land. Following the industrial revolution, capital became scarce. With digital technologies scarcity is shifting once more. We need to figure out how to live in The World After Capital in which the only scarcity is our attention. Union Square Ventures is a thesis-driven venture capital firm. Since 2003, the firm has invested in over 100 companies that use the power of the internet to re-shape markets, like Twitter, Tumblr, Foursquare, Etsy, Kickstarter and Shapeways. Before joining USV, Albert was the president of del.icio.us through the company's sale to Yahoo and an angel investor. He previously founded or co-founded several companies, including a management consulting firm and an early hosted data analytics company. Albert graduated from Harvard in economics and computer science and holds a Ph.D. in Information Technology from MIT.

Sinan and fellow MIT alumnus, Albert Wenger, partner at Union Square Ventures, a New York-based early stage VC firm focused on investing in disruptive networks, whose portfolio companies include: Twitter, Tumblr, Foursquare, Etsy, Kickstarter and Shapeways. Albert shares some excellent business advice and the lessons he's learned along the way. The Winding Road from MIT PhD to Venture Capitalist (2:07-15:34)What Makes an Investment-Worthy Entrepreneur (15:42-21:51)Technology Trends and Transformations and AI Automation (21:59-41:22Web3, Blockchain, NFTs, Crypto + Decentralization (41:30-1:06:04)The State of the Global Political Economy and Solving the Climate Crisis (1:06:12-1:15:56)The Future of Social Media and Network Regulations (1:16:04-1:25:18)The Worst Investment Mistake You Can Make and How Mindfulness is Key to Success (1:25:26-1:30:13)The Biggest Fear + Hope for Our Kids (1:30:21-1:34:30)Visit ide.mit.edu/podcast for more.Follow @sinanaral and @mit_ide on Twitter and @professorsinan and @digitalinsiderpod on Instagram and TikTok.Please remember to rate us and leave a review - the best way to support the podcast.

Synopsis: Josh Wolfe is the Co-Founder and Managing Partner of Lux Capital, a venture capital firm that invests in emerging science and technology ventures. Josh joins us for a discussion centered around investing in biotech. He discusses the arc of his career and the forces that led him to pursue a path at the intersection of science and finance. Josh also talks about the current state of biotech investing, trends he expects to see in the future, his advice to founder-led biotech companies, what he believes are the top three criteria for success for biotech companies, and his thoughts on the future of biotech. It's an illuminating conversation you won't want to miss. Biography: Josh co-founded Lux Capital to support scientists and entrepreneurs who pursue counter-conventional solutions to the most vexing puzzles of our time in order to lead us into a brighter future. The more ambitious the project, the better—like, say, creating matter from light. Josh is a Director at Shapeways, Strateos, Lux Research, Kallyope, CTRL-labs, Variant, and Varda, and helped lead the firm's investments in Anduril, Planet, Echodyne, Clarifai, Authorea, Resilience and Hadrian. He is a founding investor and board member with Bill Gates in Kymeta, making cutting-edge antennas for high-speed global satellite and space communications. Josh is a Westinghouse semi-finalist and published scientist. He previously worked in investment banking at Salomon Smith Barney and in capital markets at Merrill Lynch. In 2008 Josh co-founded and funded Kurion, a contrarian bet in the unlikely business of using advanced robotics and state-of-the-art engineering and chemistry to clean up nuclear waste. It was an unmet, inevitable need with no solution in sight. The company was among the first responders to the Fukushima Daiichi disaster. In February 2016, Veolia acquired Kurion for nearly $400 million—34 times Lux's total investment. Josh is a columnist with Forbes and Editor for the Forbes/Wolfe Emerging Tech Report. He has been invited to The White House and Capitol Hill to advise on nanotechnology and emerging technologies, and a lecturer at MIT, Harvard, Yale, Cornell, Columbia and NYU. He is a term member at The Council on Foreign Relations and Chairman of Coney Island Prep charter school, where he grew up in Brooklyn. He graduated from Cornell University with a B.S. in Economics and Finance.

Duann Scott is an industrial-designer-turned-business-development specialist who has worked for such illustrious firms as Shapeways, Autodesk, and nTopology. In our interview with him, he talks fluidly about his vision for the 3D printing software market and what is impeding additive manufacturing (AM) from moving forward. Duann is a firm believer in design for additive, working as an educator of these skills and assisting startups through his Bits to Atoms consultancy. Come hear what he has to say about software for a 3D printed world.

Ariana Thacker, founding partner at Conscience VC, dispels some myths about venture capital. Ariana talks about how entrepreneurial experience influences the investment playbook. She also shares her thoughts on qualities of a founder that she thinks are more important post-COVID.In this episode, you'll learn:6:52 Is a bit more entrepreneurial experience a drawback?9:45 Why founders with non-traditional paths into venture are becoming more interesting to VCs12:01 Do you need an investor network for your company to get in front of investors?15:23 Barrier to entry litmus test19:05 Founder's resourcefulness vs geographic location: Which is more important?The non-profit organization that Ariana is passionate about: Society of Women EngineersAbout Guest SpeakerAriana Thacker is the Founding Partner at Conscience VC. Ariana is a technical investor with technical expertise spanning Fortune 500 companies to early-stage start-ups. She is also a community leader for diversity. She allocates 50% of her portfolio to diverse and female founders. Ariana tenured as President of Society of Women Engineers and is the founder of congressionally-recognized philanthropic organization.Fun fact: Ariana writes poetry & rapAbout Conscience VCConscience VC is a Miami-based early-stage fund pioneering the intersection of consumer and science.  Portfolio companies include Shapeways, Nimbus, Wave Life, Aqua Cultured Foods, Last Gameboard, Harmony Baby Nutrition among others.Next EpisodeIn our next episode, we welcome Taylor Clauson, the Founder and Managing Partner at Abstraction Capital, to talk about how he builds conviction from the founder's ‘why story'.Subscribe to our podcast and stay tuned for our next episode. Follow Us:  Twitter | Linkedin | Instagram | Facebook

Today's episode brings together two companies that represent at the same time, the history and the future of additive manufacturing: AM Flow and Midwest Prototyping. Midwest Prototyping is a leading AM service provider that started in 2001 with the purchase of a desk and one stereolithography machine. Both of these shared an office with founder Steve Grundahl, who is our guest today. Steve got early exposure to rapid prototyping technology while studying at the University of Milwaukee's School of Engineering in the early 1990s. Although his exposure to this technology was during its development stage, he never lost his fascination with it. As industries began adopting it as a valid option for rapid prototyping and product development, Steve took the opportunity to start his journey as a business owner. Fast forward to 2006 and the company had built a new 18,000-square-foot facility with anticipation of future growth. In 2008, Midwest Prototyping acquired longtime competitor Manitowoc Prototypes adding even more rapid prototyping capacity. More acquisitions followed, leading to the ability to offer 6 distinct 3D printing technologies on over 40 machines with more than 40 materials. More recently, Midwest Prototyping became part of the Prototek Group further growing the overall AM capabilities and continuing its acquisition strategy with ProtoCAM. Suffice to say that now the company has massive production capabilities and that's exactly where AM Flow comes in Last year Midwest Prototyping took its next step toward a fully automated additive manufacturing production plant with end-to-end product tracking and tracing by installing the AM-VISION and AM-SORT, in the AM-Flow production line at their Blue Mounds production facility. The company is one of the first clients of AM-Flow using AM-Flow's vision technology. This moment marks the first step to the brand new, next-generation VISION and SORT. With these production modules, Midwest Prototyping can automatically recognize, sort, and route their daily volume of SLS, MJF and SLA prints, in only seconds per part. With the placement of the AM-VISION and AM-SORT, fully MES integrated, the production workflow has become completely paperless. Also here to tell us what AM Flow can do for AM companies with large production requirements is Carlos Zwikker. He has 20 years experience as an International Research-Based Consultant and joined Philips as a strategy & insight executive in the Philips Lifestyle Incubator, a corporate venturing unit of Philips. Here, Carlos, entered the Additive Manufacturing market in 2006 as he co-managed several start-ups, including AM service provider Shapeways. In 2018 he joined the management of AM-Flow where he is responsible for global sales and marketing.

–What makes networking valuable?–What are new ways to network?–How can we measure the success of networking?GUEST INFO: In the late 90s, Pieter started off as an "internet hustler" with various eBay shops and building tailor-made PCs. In 2004 retail was starting to see online disruption and Pieter turned around an old-fashioned photo camera store from "analog to digital". Building one of the first online & offline hybrid formulas was a big hit and revenue grew quickly.In 2012 he sold the company and made the switch to 3D Printing Service bureau and Marketplace, Shapeways. At first, taking care of the EMEA supply chain, putting in place management reporting, lower cost and lead-time and scaling from a handful of vendors to 50+ and later joined the MT in NYC to head up Growth, Sales & Business Development.After almost 6 years at Shapeways, it was time for a change and through some consulting and failed startup projects Pieter stumbled upon RFID and the untapped potential. This led to the launch of Mobilo.Contact for Pieter LimburgWebsite:  www.mobilocard.comTwitter:  https://twitter.com/pieterlimburg Linkedin: https://www.linkedin.com/in/pieterlimburg/ The Small Business Show is the official podcast for Garuda Promo and Branding Solutions. For more information visit Website: http://www.garudapromo.com​​Instagram: https://www.instagram.com/garudapromo/​​Facebook: https://www.facebook.com/garudapromoTwitter: http://www.twitter.com/Garuda_Swire​Linkedin: https://www.linkedin.com/in/swire-ho-thepromoguy-6b9Pinterest: https://www.pinterest.com/garudapromo/YouTube: https://www.youtube.com/c/Garudapromo88/videos#thesmallbusinessshow​​​ ​​​ #gaurdapromobranding​​ #smallbusinessmatters #smallbusinessstrong

Pieter Limburg is the CEO and Founder of Mobilo, the smart business card. In the late 90s, Pieter started off as an "internet hustler" with various eBay shops and building tailor-made PCs. In 2004 retail was starting to see online disruption and Pieter turned around an old-fashioned photo camera store from "analog to digital". Building one of the first online & offline hybrid formulas was a big hit and revenue grew quickly. In 2012 he sold the company and made the switch to 3D Printing Service bureau and Marketplace, Shapeways. At first, taking care of the EMEA supply chain, putting in place management reporting, lower cost and lead-time and scaling from a handful of vendors to 50+ and later joined the MT in NYC to head up Growth, Sales & Business Development. After almost 6 years at Shapeways, it was time for a change and through some consulting and failed startup projects Pieter stumbled upon RFID and the untapped potential. This led to the launch of Mobilo. Get to know more about Mobilo: https://www.mobilocard.com/ https://www.instagram.com/mobilodigital/?hl=en https://www.linkedin.com/company/mobilocard/ #RealEstate #Tips #PreReal For informational purposes only. Always consult with professionals. This is not meant to be used as legal or tax advice or otherwise. Any projections, opinions, assumptions, or estimates used are for example only. All information should be independently verified and is subject to errors and omissions. Check out some of our other videos and listings: PreReal Podcast https://www.youtube.com/watch?v=pTgZYyrkRyU&list=PLbyMUN39hTNWUFWH-tprcR0sTOwdqCfuk Becca's Real Estate Tips https://www.youtube.com/watch?v=hSQsDJUTOW8&list=PLbyMUN39hTNVu6OeabosHIP_CTfuqg_4X Prendamano Real Estate of staten island, NY is a real estate marketing firm that is focused on lead generation for all its properties for sale. More leads equals bigger pockets in the end for everyone. If you are house hunting and looking for a house for sale don't hesitate to give us a call (718)200-7799. If you think it is time to sell your house, we can get you top dollar for your property. Visit us at www.prereal.com Follow us on: Facebook: https://www.facebook.com/PrendamanoRealEstate Instagram: @prerealpodcast @prerealestate TikTok: @prerealestate Twitter: @prereal

Please join us for our next Digital Irish event at Bank of Ireland NYC Hub, where we'll host Aidan O'Sullivan of Shapeways, to discuss the past, present and future of 3D printing - more details here: https://digitalirish.com/from-novelty-to-supply-chain-game-changer-the-evolution-of-3d-printing/ During the event, we will be fundraising for Rapid Response Ukraine - rapidresponseukraine.com They can get the most urgently required medicines to battlefield hospitals when the larger organisations cannot. 100% of their funds, go toward purchasing and supplying these medicines to where they are most needed.

Rhonda Giedt, Director of Marketing Communications & DE&I Chair at Shapeways, talks with Jeremy Shere, founder & CEO of Tribal knowledge Podcasting, about connecting with an audience that's not super online.Highlights:Researching personas who are not super onlineUsing a blend of digital and "old school" channels to engage an audienceDigital engagement strategies for an audience that's online sometimes, but not all the timeLearn more about ShapewaysConnect with Rhonda Giedt on LinkedIn

Shapeways (SHPW) is a world leader in 3D printing and it went public via SPAC merger with Galileo (GLEO). The SPAC merger values Shapeways at $410 enterprise value. Survey data predicts that 55% of 3D printing in manufacturing will replace existing processes. Greg Kress, CEO of Shapeways, joins Oliver Renick to discuss the merger and the outlook for the company. Tune in to find out more.

This week on the SPACInsider Podcast, we will be speaking with Greg Kress, CEO of Shapeways. Shapeways, which announced a combination with Galileo Acquisition Corp. in April, allows customers to have digitally designed products manufactured and sent to them via its unique software platform. It is at the center of the fascinating additive manufacturing space, which has seen a bevy of SPAC transactions. We talk about the forces driving the adoption of additive manufacturing and the economics of providing 3D-printing and other tools at the different levels of the value chain.

Carine Carmy, co-founder & CEO of Origin, a women's health company that provides physical therapy for the common but overlooked condition known as pelvic floor dysfunction. Carine is a go-to-market leader in healthcare and technology, and has held leadership roles at companies including Amino, Shapeways, and Monitor Group. Carine discusses the basics of pelvic floor health, how she overcame her imposter syndrome, and how Origin weathered the covid storm. She advocates for increased education on the pelvic floor and for bringing change to the healthcare system from the inside out.   Do you have any thoughts? Please email us at hello@rosenmaninstitute.org. We post new episodes every Monday. “The Health Technology Podcast” is produced by Herminio Neto, hosted by Christine Winoto, and engineered by Andrew John Rojek.

In this episode, Marleen Vogelaar — founder of Ziel & co-founder of Shapeways — explains how her experience with Shapeways defined her strategic approach when launching the on-demand manufacturing platform Ziel. She breaks down her journey towards finding the right product-market fit, opting for steward-ownership, hiring pivotal talent that expedited the scaling process, and securing VC funding in the US.

We take a look at new toys from Ertl and Spec Cast. The Allis Chalmers 7045 is our tractor of the week. FOR THE LOVE OF TRACTORS MERCH! https://teespring.com/stores/for-the-love-of-tractors The For the Love of Tractors website www.fortheloveoftractors.com Parts, videos, kits, and finished products, as well as tips, tricks, and photos. Check out our Shapeways store for parts and kits! www.shapeways.com/shops/ftlot We are on facebook https://www.facebook.com/fortheloveoftractors/ and Instagram fortheloveoftractors Check out the worlds first farm toy podcast! https://anchor.fm/ftlot Also check out our friends at B and B farm toys. https://www.bandbfarmtoys.com/

We talk about the International 1466, New toys from ertl and spec cast. FOR THE LOVE OF TRACTORS MERCH! https://teespring.com/stores/for-the-love-of-tractors The For the Love of Tractors website www.fortheloveoftractors.com Parts, videos, kits, and finished products, as well as tips, tricks, and photos. Check out our Shapeways store for parts and kits! www.shapeways.com/shops/ftlot We are on facebook https://www.facebook.com/fortheloveoftractors/ and Instagram fortheloveoftractors Check out the worlds first farm toy podcast! https://anchor.fm/ftlot Also check out our friends at B and B farm toys. https://www.bandbfarmtoys.com/

We recently had the pleasure of interviewing Robin Huizing, the founder of Addmio, a 3D printing education platform. During this fun application, Robin showed us the power of design with a demo from his new idea of a personalized mouse. Our conversation expanded from there. Who is Robin Huizing? Robin is the founder of Addmio a 3D printing education platform. He recently also joined Oqton as its application engineer. In his own words, “During my study, I started my own design studio, sample. studio, and ran it for more than 10 years. I created corporate identities and websites, visuals for architectural firms, and hosted creative workshops at universities.After my graduation, I started my career as a 3D Printing Engineer at Shapeways. I worked in every production team and with every in-house technology and in a few years I learned to work with FDM, SLA, DLP, MJP, and SLS. All plastic 3D printing technologies. In total I prepared, 3D printed, and post-processed 10.000+ parts.Then I moved to Additive Industries to work as an Additive Manufacturing Designer. Here, I specialized in Design for AM and was also involved with production planning, application development, and a lot of local and on-site training. Here I gained valuable experience with metal 3D printing, LPBF.In 2020 I combined everything I've learned and my passions for technology, education, and design and I Founded Addmio. To make 3D printing accessible through education. We're working with a young and ambitious team to create online courses that are efficient, affordable, and accessible to everyone with a smartphone. We've made a great start in 2020 and are planning to grow and expand in 2021 so stay tuned. ”Relevant links: Show notes: https://3dheals.com/robin-huizing-the-power-of-3d-printing-design-and-educationInstagram IGTV: https://www.instagram.com/tv/CLGbOY0D5kN/?utm_source=ig_web_copy_linkAddmio: https://www.addm.io/Support the show (https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=STF9STPYVE2GG&source=url)

I talk to Andrew O'Leary about farm toy displas, and I also report on the Janesville, WI show. FOR THE LOVE OF TRACTORS MERCH! https://teespring.com/stores/for-the-love-of-tractors The For the Love of Tractors website www.fortheloveoftractors.com Parts, videos, kits, and finished products, as well as tips, tricks, and photos. Check out our Shapeways store for parts and kits! www.shapeways.com/shops/ftlot We are on facebook https://www.facebook.com/fortheloveoftractors/ and Instagram fortheloveoftractors Check out the worlds first farm toy podcast! https://anchor.fm/ftlot Also check out our friends at B and B farm toys. https://www.bandbfarmtoys.com/

For the Love of Tractors Episode 5: Prestige and the John Deere 4020 On today's podcast I talk about the Prestige series from Ertl and the John Deere 4020 is our tractor of the week. FOR THE LOVE OF TRACTORS MERCH! https://teespring.com/stores/for-the-love-of-tractors The For the Love of Tractors website www.fortheloveoftractors.com Parts, videos, kits, and finished products, as well as tips, tricks, and photos. Check out our Shapeways store for parts and kits! www.shapeways.com/shops/ftlot We are on facebook https://www.facebook.com/fortheloveoftractors/ and Instagram fortheloveoftractors Check out the worlds first farm toy podcast! https://anchor.fm/ftlot Also check out our friends at B and B farm toys. https://www.bandbfarmtoys.com/

In this episode I talk about upcoming farm shows, and what to expect in the covid era. I also talk about what to expect if it is your first show. Later in the episode I discuss the John Deere WA17, 1/64 Wagners and how crazy the market is on 1/16 Wagners. The For the Love of Tractors website www.fortheloveoftractors.com Parts, videos, kits, and finished products, as well as tips, tricks, and photos. Check out our Shapeways store for parts and kits! www.shapeways.com/shops/ftlot We are on facebook https://www.facebook.com/fortheloveoftractors/ and Instagram fortheloveoftractors

Your business card is boring.  But, there's a new type of digital business card that is often called a “magic card” because it's so powerful.  In this show we discuss how to get the hottest new form of business card that will make you the life of the party while wildly expanding your database and ability to network. About Our Guest: In the late 90s, Pieter Limburg started off as an "internet hustler" with various eBay shops and building tailor-made PCs. In 2004 retail was starting to see online disruption and Pieter turned around an old-fashioned photo camera store from "analog to digital". Building one of the first online & offline hybrid formulas was a big hit and revenue grew quickly. In 2012 he sold the company and made the switch to 3D Printing Service bureau and Marketplace, Shapeways. At first, taking care of the EMEA supply chain, putting in place management reporting, lower cost and lead-time and scaling from a handful of vendors to 50+ and later joined the MT in NYC to head up Growth, Sales & Business Development. After almost 6 years at Shapeways, it was time for a change and through some consulting and failed startup projects Pieter stumbled upon RFID and the untapped potential. This led to the launch of Mobilo Card During this show, we discuss: • Digital business card • Things you must add to your digital business card • How digital business cards create a new and specific tool for lead generation • Why should businesses consider a digital business card • How a digital business card help to maximize your online presence • Using a digital business card help to increase your business opportunity • What makes a digital business card different from the traditional one • Advantages of digital business card for your business • The biggest problem of digital business card • Do's and dont's of a digital business card

3D printing technology has the potential to impact almost every industry in the world — whether it's creating replacement parts for machines to quickly developing prototypes from scratch. Today, the impact 3D printing is having on the global fight against the coronavirus COVID-19 is significant. In this episode of our show, my colleague and fellow analyst Sarah Wallace and I take a look at the role 3D printing is playing — from rapidly creating protective face shields, respirator masks, nasal swabs and ventilator parts for use by front line workers and hospitals — to the challenges the industry faces, to spotlighting companies doing innovative things with 3D printing — and what's ahead.   What makes 3D printing such a great solution?   What makes 3D printing such a great solution? In a word: It's fast. With 3D printing, in the space of a short period of time (think hours not days or weeks) it's possible to design, prototype and produce an idea. And that? That incredibly rapid turnaround time is something that manufacturers can't (yet) do. Right now, supply chain issues and overwhelming demand are what is driving the need for 3D printing solutions. As a result, 3D printing is, and can continue to, have a big impact on the supply chain by filling short-term supply gaps that every industry is facing as we navigate the COVID-19 outbreak.   Here's but one example of how 3D printing can provide important solutions to the coronavirus COVID-19 pandemic and our supply chain problems —   Manufacturers of nasal swabs have been struggling to keep up with demand. These swabs are used for coronavirus tests and are very different from standard swabs, as they need to be long and skinny, made of synthetic fiber, and can't have a wooden shaft. While hospitals and communities want and desperately need to ramp up testing, this weak link in the supply chain is a big factor. That's where 3D printing can help. In a recent interview with CNN, HP's Raymond Pastor, acting president of 3D printing and digital manufacturing for HP indicated the company has the capacity to print 1 million swabs a week in the U.S. alone.     What are the limitations of 3D printing?   Sarah walked us through some challenges as it relates to 3D printing. For starters, not all 3D printed equipment is the same, and some is easier to produce than others. Equally as important, some 3D-printed equipment might be better than others, while some might not quite afford the level of protection that's needed. Some things require FDA approval to produce, and of course there's always the risk factor for companies producing these things that is inevitably important to consider.   Sarah also mentioned there's a skills gap that plays a role in the limitations and challenges of 3D printing, as well as some other things worth considering.   What companies in the 3D Printing Space Are Doing Some Really Innovative Things?   Our conversation in the webcast turned to the companies in the 3D printing space that are doing some really innovative things. Sarah is currently immersed in developing a 3D market insight report, so it wasn't hard to come up with examples of companies doing innovative things with 3D printing. This includes:   Siemens' Additive Manufacturing (AM) Network is an online order-to-delivery collaboration platform for the industrial additive manufacturing community and connects users, designers, and 3D print service providers to enable faster and simpler production of spare parts for machines like ventilators. Siemens is also making 3D printers available to the global medical community to speed design and production during the COVID-19 pandemic. Doctors, hospitals, and organizations in need of medical devices and designers and service providers can register for free access to the Siemens AM Network.   HP has developed a 3D printed hands-free door opener, a mask adjustor clasp that helps make masks more comfortable during long time wear, face shields, hospital grade FFP3 face masks that are reported to be available soon, and 3D printed parts for field ventilators are in development. HP and the company's partners are making validated design files for many parts that don't require complex assembly available for free. If you're a 3D designer or innovator (or know one) who wants to join the battle against COVID-19, you can contribute new applications and ideas to the collaborative effort directly from HP's website dedicated to 3D printing in support of COVID-19 containment efforts.   Dassault Systèms is using scientific simulation of the human sneeze to support the development of personal protective equipment (PPE) projects in the 3DEXPERIENCE Lab OPEN COVID-19 online community, as part of collaborative efforts to quickly answer unmet urgent needs during the COVID-19 pandemic. The simulations are used to demonstrate what happens when a person sneezes, to better understand the effectiveness of different PPE being developed and deployed, and to aid in improving their design. Dassault's simulator applications are already used in the aerospace and automotive industries to generate a dynamic simulation of fluid and air flow, and their simulation apps are likewise being used to help understand the flow physics of sneezes.   What are some 3D Printing Solutions Being Used in the Fight Against COVID-19?   Some of the big brands immersed in the 3D printing space — like Siemens, and HP, and Dassault we have heard of and might not be surprised by — but they are not alone. There are other companies in the 3D printing space that are also really stepping up.   Tangible Creative, MakerBot, Shapeways and other 3D printing companies in the NYC area have joined together to create the Covid Makers Response Coalition to help provide 3D printed supplies to area hospitals in need of gear. This group is printing 2,000 face shields a day for hospitals in the NYC area.   Voodoo Manufacturing, a NY-based 3D printing startup, has repurposed its 5,000 square-foot facility to mass produce emergency personal protective equipment for the healthcare workers and hospitals. It plans to print at least 2,500 face shields weekly. Hospitals and healthcare workers can place batch orders for protective face shields at CombatingCovid.com.   Carbon, a 3D printing firm is working with the University of California San Francisco (UCSF) to create nasal swabs.   SmileDirectClub is one of the largest 3D printing manufacturers in the US (who knew?) and is partnering with medial supply companies and healthcare orgs to produce supplies like face shields and respirator valves.   Protolabs, a Minnesota-based digital manufacturer, has prioritized medical orders on its manufacturing floor which includes ventilator parts and is also producing components for COVID-19 test kits   Formlabs, a Somerville, Mass-based developer and manufacturer of 3D printers and software is using 250 printers in its Ohio factor to manufacture 100,000 nasal swabs for COVID-19 testing every day.   Ford Motor Company and GE are partnering to expand production of ventilators and other critical equipment in the U.S. and currently using Ford's factories to produce plastic face shields and components for PPE, with a goal of assembling more than 100,000 face shields a week.   Volkswagon has formed a task force to adapt its manufacturing facilities much the way Ford and others have, and also plan on leveraging its more than 125 industrial 3D printers.   The allure of 3D printing is clear   As you'll see by our conversation here, the allure of 3D printing to combat coronavirus COVID-19 is clear. 3D printing solutions are affordable. They interject much needed rapid response capabilities into the manufacturing process and also augment gaps in the supply chain. The beauty and the strength of 3D printing lies in both the affordability of 3D printers and the network or the community of 3D printing enthusiasts. Just how big is that community of 3D printing enthusiasts?   According to a report published in August of 2019 by the Federation of American Scientists, there were some 600,000 purchases of 3D printers priced under $5,000 sold in the US alone in 2018, and some 140,000 industrial grade 3D printers sold worldwide. That means there are a lot of 3D printers out there. Even more impressive, to us anyway, is the knowledge base and expertise, and the strength of the community that's being created — both by gigantic companies in the 3D sector, as well as by smaller companies all over the world — is quickly becoming clear.   What role will 3D printing play as businesses begin to rethink and rework their business models post-pandemic? We predict that it will be a big one! Keep an eye out for Sarah's Market Insights Report on 3D Printing, which will be published in early May.

This episode is recorded live at Glowforge, makers of a 2D laser cutter—but it's not a sponsored episode and we don't talk about the hardware much at all. Instead, it's conversation about what people are trying to make and how to get started as a creator. I talk with Glowforge founder (and my friend) Dan Shapiro, and the company's two content designers, Shell Meggersee and Nick Taylor, who spend a lot of their time talking to new and experienced makers as they work with their laser equipment. They offer some great insight and a lot of encouragement. A few lovely quotes that struck me on listening to the recording afterwards: Nick: “I wonder if we're teaching them how to fail gracefully, rather than how to be successful?” Shell: “There's some subtle psychology in the fact that, ‘Oh, the machine messed up! Oops! It wasn't me!'” Dan: “Tools that help you become an amateur are so wonderful…it gets you to that point where you have some small degree of self-sufficiency and creativity.” (Glowforge did sponsor an episode earlier in the current season; this episode was entirely my idea and no money changed hands. However, if you're thinking about buying a Glowforge, you can use this referral link and get $100 to $500 off purchase price depending on the model. I receive the same amount as a referral fee, which helps support the podcast.) Patrons This episode is also brought to you in part by Disruptor-level patrons Bob Owen, Garrett Allen, Michael Warner, Nick Hurley, and Nicholas Santos. You can become a patron of the show on a one-time or recurring basis, and get rewards like an exclusive enamel pin and being thanked in this fashion! Guest biographies Dan Shapiro sold his last company to Google. His last side project was Robot Turtles, the best-selling board game in Kickstarter history. He builds drones, authored Hot Seat: The Startup CEO Guidebook, and his seven-year-old twins regularly beat him at the game Werewolf. You can listen to the New Disruptors episode on Robot Turtles (episode 59, January 2014). Shell Meggersee has worked in film, TV and video games, bringing everything from giant 3D monsters to well-known cartoon characters to life. At night, you might find her designing anything from vinyl toys to couture bedding fabric to intricate wedding invitations. Nick Taylor has spent the last 12 years completing hundreds of projects including custom headphones, bespoke bicycles, desktop furniture, and lighting. Before joining Glowforge, Nick spent 5 years at Apple and ran his own company making artisanal leather goods. Show notes Service bureaus for 2D cutting and 3D printing abound. Ponoko is a well-known one for cutting and engraving, and Shapeways for 3D printing. Nick Benson, part of a great family of artists and a descendent of stone carvers, has an amazing Instagram account The ansible, a sci-fi solution for instantaneous communication Graw! Studio Neat episode of New Disruptors in which they talk about their tiny lathe Anna Robinson, my collaborator on the Tiny Type Museum, makes spoons

This episode leads off with a little hobby talk and then we move into two special segments – one with a Shapeways community manager and one with Matthias Weeks from … Read More

Greg and Andy are back in Episode 24 of the MBS Podcast! For the first segment, they discuss the recent trends with components (markers, dice, templates, etc) in naval gaming. Later, Greg and Andy discuss Shapeways and the impact it has had on the gaming hobby in general and naval gaming in particular Naval Components Discussion: 35 Min Naval Command Review: 1 Hr 22 Min   ==Links Discussed in Show== Litko Aerosystems Shapeways 

Line messaging app (born out of disaster), kilometer pronounced (UK vs US), mousepad basics, Uber rider ratings, commercial 3D print options (Shapeways, Kraftwurx, Ponoko, 3D Hubs), your Facebook rights revealed, parental controls (router vs OS), Profiles in IT (Ted Hoff, inventor of the microprocessor), Device of the Week (Amazon Echo Look, help with wardrobe), NSA halts controversial collection program (under review by courts), ransomware attacks up 50 percent (delivered via Word or Excel attachments), Net Neutrality to be revisted by FCC (balancing the rights of telcos and content providers), and smartphone zombies blamed for road deaths. This show originally aired on Saturday, April 29, 2017, at 9:00 AM EST on WFED (1500 AM).

Talking 3D print design with 3D toy artist Christina Douk who fell in love with how 3D printing brings to life her computer models. The next generation of designers will have a new view of design and how to conceptualize and bring to life their creative ideas because of 3D printers. Fascinating to find out her comparison of 3D prints she had done from Shapeways and Sculpteo through a Groupon deal from the level of service, time to receive product, and final result. To send us a message, go to 3dstartpoint.com or shoot us a message at info@3dstartpoint.com or on our facebook or twitter! Its absolutely free, so ask away and and don't forget to subscribe so you can hear more on our regularly scheduled Thursday podcast episodes!

In this wide-ranging discussion about the latest and next consumer and industrial applications for 3D printing, we examine (with Shapeway's Carine Carmy and a16z's Tom Rikert): how the software-driven ideal of product-market-fit may be achieved in physical products, too -- with rapid prototyping through 3D printing; how the ability to manufacture on-demand changes traditional notions of seasonality and inventory management in product cycles and development; and how the long tail of 3-D printing means being able to have a market of 1. The views expressed here are those of the individual AH Capital Management, L.L.C. (“a16z”) personnel quoted and are not the views of a16z or its affiliates. Certain information contained in here has been obtained from third-party sources, including from portfolio companies of funds managed by a16z. While taken from sources believed to be reliable, a16z has not independently verified such information and makes no representations about the enduring accuracy of the information or its appropriateness for a given situation. This content is provided for informational purposes only, and should not be relied upon as legal, business, investment, or tax advice. You should consult your own advisers as to those matters. References to any securities or digital assets are for illustrative purposes only, and do not constitute an investment recommendation or offer to provide investment advisory services. Furthermore, this content is not directed at nor intended for use by any investors or prospective investors, and may not under any circumstances be relied upon when making a decision to invest in any fund managed by a16z. (An offering to invest in an a16z fund will be made only by the private placement memorandum, subscription agreement, and other relevant documentation of any such fund and should be read in their entirety.) Any investments or portfolio companies mentioned, referred to, or described are not representative of all investments in vehicles managed by a16z, and there can be no assurance that the investments will be profitable or that other investments made in the future will have similar characteristics or results. A list of investments made by funds managed by Andreessen Horowitz (excluding investments and certain publicly traded cryptocurrencies/ digital assets for which the issuer has not provided permission for a16z to disclose publicly) is available at https://a16z.com/investments/. Charts and graphs provided within are for informational purposes solely and should not be relied upon when making any investment decision. Past performance is not indicative of future results. The content speaks only as of the date indicated. Any projections, estimates, forecasts, targets, prospects, and/or opinions expressed in these materials are subject to change without notice and may differ or be contrary to opinions expressed by others. Please see https://a16z.com/disclosures for additional important information.

Make  a Test, Leggo MYBuild, Peristaltic Pump, Shapeways metal prints