Podcasts about Omron

This episode covers: Cardiology This Week: A concise summary of recent studies Hypertension in the elderly The digital twin in cardiology Snapshots Host: Emer Joyce Guests: Carlos Aguiar, Gianfranco Parati, Nico Bruining, Joost Lumens Want to watch that episode? Go to: https://esc365.escardio.org/event/1804 Disclaimer: ESC TV Today is supported by Bristol Myers Squibb and Novartis. This scientific content and opinions expressed in the programme have not been influenced in any way by its sponsors. This programme is intended for health care professionals only and is to be used for educational purposes. The European Society of Cardiology (ESC) does not aim to promote medicinal products nor devices. Any views or opinions expressed are the presenters' own and do not reflect the views of the ESC. Declarations of interests: Stephan Achenbach, Nico Bruining, Emer Joyce and Nicolle Kraenkel have declared to have no potential conflicts of interest to report. Carlos Aguiar has declared to have potential conflicts of interest to report: personal fees for consultancy and/or speaker fees from Abbott, AbbVie, Alnylam, Amgen, AstraZeneca, Bayer, BiAL, Boehringer-Ingelheim, Daiichi-Sankyo, Ferrer, Gilead, GSK, Lilly, Novartis, Pfizer, Sanofi, Servier, Takeda, Tecnimede. Davide Capodanno has declared to have potential conflicts of interest to report: Bristol Myers Squibb, Daiichi Sankyo, Sanofi Aventis, Novo Nordisk, Terumo. Joost Lumens has declared to have potential conflicts of interest to report: research grants from Medtronic (all grants paid to institute, Maastricht University). Gianfranco Parati has declared to have potential conflicts of interest to report: honoraria for lectures by Omron, Merck, Viatris, Somnomedics. Steffen Petersen has declared to have potential conflicts of interest to report: consultancy for Circle Cardiovascular Imaging Inc. Calgary, Alberta, Canada. Emma Svennberg has declared to have potential conflicts of interest to report: Abbott, Astra Zeneca, Bayer, Bristol-Myers, Squibb-Pfizer, Johnson & Johnson.

Het Verenigd Koninkrijk, Frankrijk en Oekraïne gaan een eigen vredesplan voorleggen aan de Verenigde Staten. Dat zei de Britse premier Keir Starmer gisteravond na een speciale Europese veiligheidstop in Londen. Ook zei de Franse president Emmanuel Macron tegen de krant Le Figaro dat de eerste stap een maandlange wapenstilstand is, zonder aanvallen via lucht, zee of energie-infrastructuur. Maar volgens BNR's Europaverslaggever Geert Jan Hahn is dat plan nog verre van duidelijk. 'We hebben nog geen bevestiging van andere Europese landen dat deze wapenstilstand een eerste stap is in een groter vredesplan dat aan Amerika gepresenteerd zal worden.' En OMRON, de fabrikant van onder andere bloeddrukmeters, verzamelt locatiegegevens van miljoenen gebruikers. Dat blijkt uit onderzoek van BNR. Experts wijzen erop dat het heimelijke tracken mogelijk illegaal is. Dit gebeurde via een app waarin OMRON-bloeddrukmeterbezitters hun medische gegevens konden opslaan. Over deze podcast In Ochtendnieuws hoor je in 20 minuten het belangrijkste nieuws van de dag. Abonneer je op de podcast via bnr.nl/ochtendnieuws, de BNR-app, Spotify en Apple Podcasts. Of luister elke dag live via bnr.nl/live.See omnystudio.com/listener for privacy information.

LLEVA GRATIS tus menús de comidas con nuestra App https://pocketcoach.fit En este episodio, exploramos los factores que pueden afectar la precisión de las mediciones en una báscula de composición corporal OMRON. Desde la hidratación y la postura hasta el tipo de superficie y el contacto con los electrodos, analizamos cómo optimizar las condiciones para obtener datos fiables. Además, compartimos consejos prácticos para evitar errores comunes y maximizar el uso de este dispositivo en el monitoreo de la salud. #Salud #ComposiciónCorporal #BásculaOMRON #Nutrición #Bienestar #MedicionesPrecisas #Hidratación #PosturaCorrecta #MonitoreoDeSalud #EstiloDeVidaSaludable #PocketCoach Salud, Composición Corporal, Báscula OMRON, Nutrición, Bienestar, Mediciones Precisas, Hidratación, Postura Correcta, Monitoreo de Salud, Estilo de Vida Saludable, Pocket Coach

Discover how inspection technologies are reshaping the future of manufacturing with insights from Grischa Wasmus of Omron. Promising a transformation in quality control, Grischa discusses Omron's innovations, like their latest SPI system and the 3D SN80 AOI system, and explains the significance of the high-resolution X-ray solutions, VT-X750, X850, and X950, for PCB and semiconductor industries. Join us as we uncover the impact of inline X-ray machines on high-speed production lines and the emerging trend of integrating cross-discipline data to yield actionable insights.In a conversation that bridges industries, Grischa and I delve into how Omron's Q-App Suite software connects various machines to enhance production efficiency. We explore the promising partnerships with companies like Fuji and Panasonic, which are creating real-time feedback loops for instant production line adjustments.This episode offers a compelling look into the evolving landscape of electronic inspection and the quest for a more integrated, data-driven approach to manufacturing.EMS@C-Level at electronica 2024 was hosted by IPC (https://www.ipc.org/)Like every episode of EMS@C-Level, this one was sponsored by global inspection leader Koh Young (https://www.kohyoung.com).You can see video versions of all of the EMS@C-Level pods on our YouTube playlist.

Ich habe 8 Körperfettwaagen ausgiebig getestet, um die beste Waage zu finden. Mein Referenzwert für den Waagen-Test beruht auf komplexen Analysewerten der Profiwaage von der Firma InBody! Dieser Wert ist nachweislich sehr belastabar, da ich im August, im Rahmen meiner VO2max-Challenge eine Bod Pod-Messung habe machen lassen. Hier ergaben sich nahezu identische Werte, wie bei der InBody Körperfettwaage. Da der Körperfettanteil mit der Bod Pod-Messung auf einem anderen Weg ermittelt wird, als es mit der Körperfettwaage der Firma InBody der Fall ist, kann man davon ausgehen, dass mein Referenzwert valide ist. Unter anderem testete ich Körperfettwaagen der Firmen, Omron, Renpho, Tanita, Myproscale, eebbl und Lepulse. Die Ergebnisse haben mich teilweise sehr überrascht. Erfahre in diesem Video, welche die Preis-Leistungs-Siegerin unter den Körperfettwaagen geworden ist!

Ayşete Yavaş'ın hazırlayıp sunduğu Otomasyonun Seyir Defteri programına Omron Ürün Pazarlama Müdürü Tuba Yavuz konuk oldu.

Ayşete Yavaş'ın hazırlayıp sunduğu Otomasyonun Seyir Defteri programına Omron Ürün Pazarlama Müdürü Tuba Yavuz konuk oldu.

Ron Lemmens sprak met Ivo van Berkel van Dassault Systèmes. Steeds meer bedrijven staan voor de uitdaging om sneller én duurzamer te innoveren. In deze Business Update duiken we in de wereld van 'Virtual Twins', digitale kopieën die ontwerp- en productieprocessen revolutioneren. Hoe kunnen deze Virtual Twins bedrijven helpen om niet alleen kosten te besparen en sneller op de markt te komen maar ook hun CO2-voetafdruk te verkleinen? Ron Lemmens ging in gesprek met Ivo van Berkel, Sales Director Benelux bij Dassault Systèmes, over hoe modelleren en simuleren met Virtual Twins de sleutel kan zijn tot succes. Ook vertelde hij over de samenwerking met Omron en het gebruik van robotica om automatisering naar een hoger niveau te tillen. Wat zijn de succesfactoren van virtual twins in de praktijk en hoe wordt de rol van duurzaamheid steeds belangrijker in innovatie? New Business Radio Update New Business Radio maakt speciale updates & podcasts om iedere sector te informeren. De updates worden uitgezonden op New Business Radio en de podcast wordt tevens verspreid via alle bekende podcastkanalen (o.a. Spotify & Apple Podcasts) en social media kanalen. In deze updates hoor je een ander geluid. Los van het traditionele nieuws, hoor je van ondernemers wat er leeft binnen hun bedrijf of sector en delen zij hoe zij hier mee omgaan. Wat voor kansen ontstaan er en hoe kan je als organisatie zo optimaal mogelijk bewegen in een tijd als deze? Tijdens de non-stop uren op New Business Radio hoor je altijd al de meeste interessante updates over innovatie en duurzaamheid. Wat zijn de interessante ontwikkelingen in jouw branche? Wat is er anders? Laat het ons weten! De Business Update op New Business Radio wordt mede mogelijk gemaakt door Hét Ondernemersbelang.

In this episode, Patricia Torres of Omron Industrial Automation Europe explores the transformative power of industrial automation in addressing the most pressing challenges in manufacturing. From labor shortages to sustainability goals to consumer safety, Patricia provides a comprehensive look at how automation technologies are not only solving these problems but also paving the way for a more efficient and flexible future in manufacturing.Key Takeaways:(02:23) Patricia's journey in industrial automation spans over 15 years.(04:50) Automation is key to increasing efficiency and operational excellence.(05:24) The industry is facing a significant labor shortage as experienced workers retire.(06:11) Flexibility in manufacturing is crucial to meet changing consumer demands.(07:30) The rise of personalized products requires advanced data collection and processing.(08:11) Late-stage customization demands new production models.(14:37) The future of circular economies relies on robust track and trace systems.(19:52) Co-creation with customers is essential for developing effective solutions.Resources Mentioned:Patricia Torres - https://www.linkedin.com/in/patricia-torres-mateus/OMRON Global - https://www.omron.com/global/en/Industrial Automation - https://industrial.omron.co.za/en/home?utm_source=globalsite&utm_medium=geolocation&utm_campaign=SouthAfricaThanks for listening to Art of the Possible. If you enjoyed this episode, please leave a 5-star review. And be sure to subscribe so you never miss any insightful conversations.#DigitalTransformation #DigitalWatermarking #AuthenticationTechnology

Tu nutriólogo 24/7 Aquí https://pocketcoach.fit Aprende todo sobre la báscula OMRON, cómo funcionan las basculas de composición corporal En este episodio de nuestro podcast, exploramos cómo calcular el déficit calórico ideal para una pérdida de peso segura y efectiva. ¿Sabías que un déficit demasiado grande puede ser perjudicial para tu salud y metabolismo? Únete a nosotros mientras desglosamos la ciencia detrás de la Tasa Metabólica Basal (TMB), el Gasto Energético Total Diario (GETD) y te ofrecemos consejos prácticos para establecer y mantener un déficit calórico saludable. Aprenderás estrategias para evitar caer en la trampa de las dietas extremadamente bajas en calorías y cómo ajustar tu ingesta para maximizar los resultados sin comprometer tu bienestar. Qué Aprenderás: • Cómo calcular tu Tasa Metabólica Basal (TMB) y tu Gasto Energético Total Diario (GETD). • Estrategias prácticas para establecer un déficit calórico que promueva una pérdida de peso efectiva y segura. • Consejos para evitar los peligros de una dieta muy baja en calorías y cómo mantener tu salud metabólica. Participa en la Conversación: ¡Queremos saber de ti! ¿Has intentado calcular tu déficit calórico antes? ¿Cuáles han sido tus desafíos y éxitos? Comparte tus experiencias y consejos en los comentarios abajo y no olvides suscribirte para más contenido útil y motivador como este. Palabras Clave: • Pérdida de peso • Cómo calcular el déficit calórico • Consejos para la dieta • Tasa metabólica basal • Gasto energético • Salud metabólica • Dieta balanceada • Ejercicio para perder peso Hashtags: • #PérdidaDePeso • #DeficitCalorico • #SaludMetabolica • #TMB • #GETD • #DietaSaludable • #Fitness **Conéctate con nosotros**: • - Instagram: https://www.instagram.com/invites/contact/?i=j0zn6xc0kpge&utm_content=7lvy1o1 • - Facebook: https://www.facebook.com/groups/3876946855702564/ • - Sitio web: https://pocketcoach.fit

ESC TV Today brings you concise analysis from the world's leading experts, so you can stay on top of what's happening in your field quickly.   This episode covers: Cardiology This Week: A concise summary of recent studies State-of-affairs in hypertension treatment Anticoagulation in pregnancy Statistics Made Easy : Accuracy and AUC    Host: Perry Elliott Guests: Carlos Aguiar, Gianfranco Parati, Julie De Backer Want to watch that episode? Go to: https://esc365.escardio.org/event/1152   Disclaimer This programme is intended for health care professionals only and is to be used for educational purposes. The European Society of Cardiology (ESC) does not aim to promote medicinal products nor devices. Any views or opinions expressed are the presenters' own and do not reflect the views of the ESC.   Declarations of interests Stephan Achenbach, Julie De Backer and Nicolle Kraenkel have declared to have no potential conflicts of interest to report.  Carlos Aguiar has declared to have potential conflicts of interest to report: personal fees for consultancy and/or speaker fees from Abbott, AbbVie, Alnylam, Amgen, AstraZeneca, Bayer, Boehringer-Ingelheim, Daiichi-Sankyo, Ferrer, Gilead, Lilly, Novartis, Pfizer, Sanofi, Servier, Tecnimede. Davide Capodanno has declared to have potential conflicts of interest to report: Abbott Vascular, Novo Nordisk, Sanofi. Terumo, Medtronic. Perry Elliott has declared to have potential conflicts of interest to report: consultancies for Pfizer, BMS, Cytokinetics. Gianfranco Parati has declared to have potential conflicts of interest to report: honoraria for lectures by Omron, Viatris, Merck, Recor, Somnomedics. Emma Svennberg has declared to have potential conflicts of interest to report: institutional research grants from Abbott, Astra Zeneca, Bayer, Bristol-Myers, Squibb-Pfizer, Boehringer-Ingelheim, Johnson & Johnson, Merck Sharp & Dohme.

Inference Labs has created Subnet 2 Omron to provide cryptographically verified proof-of-inference. Their first target is Active Validation Service (AVS) and Liquid Restaking Tokens (LRT). Colin, Inference Labs cofounder, walks us through the Subnet and how it provides a critical services for guaranteeing authenticity for inference. Enjoy! Video: https://x.com/KeithSingery/status/1786066003497201780 https://twitter.com/inference_labs https://inferencelabs.com/ https://twitter.com/omron_ai https://github.com/inference-labs-inc/omron-subnet https://twitter.com/KeithSingery https://taostats.io/validators/bittensor-guru-podcast/

Bikem Öğünç Demir'in hazırlayıp sunduğu OMRON İLE TEKNOLOJİ ÇÖZÜMLERİ programına Omron Proje Yöneticisi Erol Dağ ve Yılmaz Makina Genel Müdürü Şaban Yılmaz konuk oldu.

Bikem Öğünç Demir'in hazırlayıp sunduğu OMRON İLE TEKNOLOJİ ÇÖZÜMLERİ programına Omron Proje Yöneticisi Erol Dağ ve Yılmaz Makina Genel Müdürü Şaban Yılmaz konuk oldu.

Bikem Öğünç Demir'in hazırlayıp sunduğu OMRON İLE TEKNOLOJİ ÇÖZÜMLERİ programına Mekatronik Otomasyon Genel Müdürü Atilla Kılınç & Özyılmaz Eti-Pak Firması Genel Müdürü Serkan Özyılmaz & Omron İstanbul Avrupa Bölgesi Kanal Sorumlusu Gökhan Çakmak konuk oldu.

Bikem Öğünç Demir'in hazırlayıp sunduğu OMRON İLE TEKNOLOJİ ÇÖZÜMLERİ programına Mekatronik Otomasyon Genel Müdürü Atilla Kılınç & Özyılmaz Eti-Pak Firması Genel Müdürü Serkan Özyılmaz & Omron İstanbul Avrupa Bölgesi Kanal Sorumlusu Gökhan Çakmak konuk oldu.

Bikem Öğünç Demir'in hazırlayıp sunduğu OMRON İLE TEKNOLOJİ ÇÖZÜMLERİ programına Omron Türkiye Ege Bölgesi Satış Müdürü Ege Ertürk ve Ar-Can Makine Genel Müdür Yardımcısı Can inam konuk oldu.

Bikem Öğünç Demir'in hazırlayıp sunduğu OMRON İLE TEKNOLOJİ ÇÖZÜMLERİ programına Omron Türkiye Ege Bölgesi Satış Müdürü Ege Ertürk ve Ar-Can Makine Genel Müdür Yardımcısı Can inam konuk oldu.

Bikem Öğünç Demir'in hazırlayıp sunduğu OMRON İLE TEKNOLOJİ ÇÖZÜMLERİ programına Omron Türkiye Ürün Pazarlama Müdürü Sedat Çalımsız & NG Macro Genel Müdürü İbrahim Yılmaz konuk oldu.

Bikem Öğünç Demir'in hazırlayıp sunduğu OMRON İLE TEKNOLOJİ ÇÖZÜMLERİ programına Omron Türkiye Ürün Pazarlama Müdürü Sedat Çalımsız & NG Macro Genel Müdürü İbrahim Yılmaz konuk oldu.

In this episode of the OnTrack Podcast, we are pleased to host a thought-provoking conversation between Tech Consultant Zach Peterson and Dr. Philip Voglewede, Professor and Associate Chair of the Department of Mechanical Engineering at Marquette University and Director at the Omron Advanced Automation Lab. Zach and Phil have a very intriguing conversation about the role of automation in the current and future industrial landscape. Anyone interested in the current state of industrial automation, manufacturing, or labor trends won't want to miss Phil's insights, many of which are rooted in his work for the ground-breaking Omron Lab. Show Highlights: 0:00 Intro 1:03 Phil & Omron Advanced Automation Lab 2:13 Pushing to Fail 5:27 A Space to Play 7:28 Omron's Early Achievements 11:26 De-Siloing & Student Response 16:37 Companies Noticing Student Skills 17:47 Students Handling Complex Problems 19:39 Grappling with the Role of Automation 23:05 Where Do We Get ROI? 25:18 Management is Adapting 27:14 The TOTAL Dollar Amount of Manufacturing Costs 29:33 Industrial IoT is the Achilles Heel 33:22 Plug & Play is the Goal 35:24 Make It Like Starbucks 37:13 Who Will Lead the Needed Standardization? 39:06 Will the Big Manufacturers Cooperate to Standardize? 41:15 Standardization is Only a Matter of Time

Get Opto's best content every day by subscribing to our FREE Newsletter: www.cmcmarkets.com/en/opto/newsletterToday, we are delighted to have Pedro Palandrani, Director of Research at Global X, return to the show.In this episode, Pedro guides us through the generational opportunities that AI offers different sectors: chipmakers & hardware, generative AI & large language models (LLMs), and automation & robotics. We explore the timeline and potential size of this transformative theme, touching on the short-term gains for companies like Nvidia and the long-term structural shifts that could take a decade or more to fully unfold. Pedro emphasises Japan's pivotal role in the automation sector, highlighting several Japanese companies at the forefront of this revolution, such as Omron and SMC. Lastly, Pedro dissects Global X's Artificial Intelligence & Technology ETF [AIQ] and Robotics & Artificial Intelligence ETF [BOTZ], explaining how the two offer investors pure-play exposure to the AI revolution. Enjoy!Last year, Pedro joined the show to discuss Global X's approach to thematic investing, the Exponential Age, and technological innovation.Listen to our previous episode featuring Pedro:AP: https://podcasts.apple.com/gb/podcast/146-pedro-palandrani-the-exponential-age-disruptive/id1504694129?i=1000590247759Spotify: https://open.spotify.com/episode/06eCuZm5GcfpO2pFMqYQ6ZThanks to Cofruition for consulting on and producing the podcast. Want further Opto insights? Check out our daily newsletter: https://www.cmcmarkets.com/en-gb/opto/newsletter------------------Past performance is not a reliable indicator of future results.CMC Markets is an execution-only service provider. The material (whether or not it states any opinions) is for general information purposes only and does not take into account your personal circumstances or objectives. Nothing in this material is (or should be considered to be) financial, investment, or other advice on which reliance should be placed. No opinion given in the material constitutes a recommendation by CMC Markets or the author that any particular investment, security, transaction, or investment strategy is suitable for any specific person.The material has not been prepared in accordance with legal requirements designed to promote the independence of investment research. Although we are not specifically prevented from dealing before providing this material, we do not seek to take advantage of the material prior to its dissemination.CMC Markets does not endorse or offer opinions on the trading strategies used by the author. Their trading strategies do not guarantee any return and CMC Markets shall not be held responsible for any loss that you may incur, either directly or indirectly, arising from any investment based on any information contained herein for any loss that you may incur, either directly or indirectly, arising from any investment based on any information contained herein.

Join me in this captivating episode as we explore the world of continuous glucose monitoring (CGM) and its profound impact on health optimization. I am thrilled to be joined by Kara Collier, a Registered Dietitian and the Director of Nutrition at NutriSense, who is a leading authority on CGM technology. Kara explains why high-energy exercises like weightlifting or HIIT can cause glucose spikes due to increased energy demands, and why exercise spikes are different from those caused by sugary foods. We also discuss how steady-state cardio and gentle walks can help lower glucose levels. To improve your overall health, we examine three key factors that affect blood sugar and discuss the importance of optimal glucose metabolism, plus how fluctuations in glucose are more important indicators of cardiovascular health than average blood-sugar levels alone.  You'll learn about the transformative power of continuous glucose monitoring to gain insights that can revolutionize your well-being. Full show notes: jjvirgin.com/nutrisense Learn more about Kara Collier: https://www.nutrisense.io/dietitians/kara-collier Use code JJ25 for $25 off your first month at Nutrisense:  https://www.nutrisense.io/?code=JJ25&utm_source=affiliate&utm_medium=referral&utm_campaign=jj.virgin I use the Oura Ring to track my sleep: https://ouraring.com/ I use my Metabolism Rescue Kit to support hormone balance, healthy insulin and glucose levels: https://store.jjvirgin.com/products/metabolism-rescue-kit?_pos=3&_sid=0c034f047&_ss=r Try Take Ten Stress Support with GABA: https://store.jjvirgin.com/products/take-ten-stress-support?_pos=1&_sid=953e09ac2&_ss=r&variant=39816161099851 Track your sleep and more with an Apple Watch:  https://amzn.to/3RDIqzZ Read my book The Virgin Diet: https://store.jjvirgin.com/collections/books/products/the-virgin-diet-paperback Get a copy of The Sugar Impact Diet: https://store.jjvirgin.com/collections/books/products/sugar-impact-diet-paperback-book Fall and stay asleep safely with Sleep Candy™:  https://store.jjvirgin.com/collections/supplements/products/sleep-candy Try a DEXA scan twice a year: https://health.ucdavis.edu/sports-medicine/resources/dxa-info Try this Omron body-composition scale: https://amzn.to/3JAcQ4I Try my protein calculator: http://jjvirgin.com/proteinfirst Use code JJVIP1000 for $1,000 off a Kooru Cold Plunge: https://www.koorucoldplunges.com/ I enjoy Sunlighten Saunas: https://get.sunlighten.com/j748h5w7er2a Why Your Blood Sugar is CRITICAL to Fat Loss Over 40 https://jjvirgin.com/main-podcast/why-your-blood-sugar-is-critical-to-fat-loss-over-40-ep-540/ Healthy Fat Sources, Supplements While Fasting & Controlling Blood Sugar: https://jjvirgin.com/main-podcast/healthy-fat-sources-supplements-while-fasting-controlling-blood-sugar-ep-516/ Use code JJ25 for $25 off your first month at Nutrisense: https://www.nutrisense.io/?code=JJ25&utm_source=affiliate&utm_medium=referral&utm_campaign=jj.virgin

This week we speak to Pippa Shakespeare, expert consultant in social media marketing strategy and founder of Mayfly Social. I speak to Pippa about the way social media has evolved and how B2B marketeers can embrace stronger, more human strategies. About Pippa: It's my mission to remove the fear, the false starts, the fluster, flounder and frustration that surrounds social media marketing for small- and medium-sized businesses. And I believe strategy is a great place to start.   Combining modern skills in strategic social media marketing with a successful career in Professional and Financial Services marketing and global brand-building consultancy, I work with the founders, leaders and marketers of SMEs to grow purposefully on social media. Pippa has worked with brands including Dulux, Omron, Philips, Heineken and BabyBel.   Links from the podcast: Website Free social media strategy guide

Exploring Body Fat Analyzers: Comparing Devices and Introducing ZozoFit Step By Step Podcasting Link! Descript Editing Software Link! ZozoFit Suit! Use $10 Off Code: BRADLEY10 In this podcast episode, I review various body fat analyzers that he has used over the years. He mentions different types of analyzers, including scales, handheld devices, professional-grade machines like hydrostatic weighing, and Caliper testing performed by skilled personal trainers. Certain devices, such as scales use electrical impedance to measure body composition. He finds them inaccurate, especially if factors like drinking alcohol, consuming salty food, or exercising prior to measurement are present. Such devices require a clean body to provide somewhat accurate results. Among the analyzers, I recommended the InBody machine, which provides a comprehensive analysis of bone, muscle, fat, and water weight. However, he it can also be affected by factors like alcohol consumption or dietary choices. The Omron handheld device, relies heavily on traditional BMI charts that he considers unreliable, particularly for individuals with a good amount of muscle. I introduce a product called ZozoFit, which I personally bought after seeing it advertised on TikTok. ZozoFit is a set of pajamas with circular dots and checkmarks that you place on specific body parts. It requires the use of an app and utilizes the light from a ring light or a similar device to capture images and analyze the size of the dots. It also requires the user to input their weight and height. The device generates a 3D scan image of the body and provides progress indicators for target areas. Overall, I go into various body fat analyzers, highlighting the importance of finding a device that works for each individual's needs and preferences. I provide insights into the strengths and weaknesses of different analyzers and encourage listeners to choose tools that motivate them to stay on track with their fitness goals. If you're interested in online personal training or being a guest on my podcast, "Over 40 Fitness Hacks," you can reach me at projectb36@gmail.com or visit my website at: www.Over40FitnessHacks.com Additionally, check out my Yelp reviews for my local business, Evolve Gym in Huntington Beach, at https://bit.ly/3GCKRzV

Im aktuellen Karriere Talk spreche ich mit Sven Kaluza von Omron Industrial Automation Europe über seinen beruflichen Werdegang in Vertrieb und Business Development. Sven stellt nicht nur seinen Aufgaben- und Verantwortungsbereich als Business Development Manager Robotics in der Central Region vor. Wir sprechen auch über die Entwicklung der Intralogistik, insbesondere unter dem Aspekt der Automatisierung und Robotik. Dazu gibt Sven sehr interessante Einblicke in die Entwicklungen der Zukunft. Zudem beleuchten wir Fragen und Thesen unter der Rubrik "Richtig oder falsch", was die Zukunftsaussichten von Logistik und Supply Chain sowie Produktion anbetrifft. Auch der Blick auf die Karrierechancen in der Intralogistik und entsprechende Empfehlungen von Sven kommen nicht zu kurz.

Lots of stroke survivors joined the stroke club due to high blood pressure. I'm one of them. The biggest challenge with high blood pressure is that it doesn't hurt. Most people will feel no symptoms unless something goes terribly wrong. Or they might learn they have the condition if they get an annual physical. Because of the danger of high blood pressure directly, and because of the danger of other conditions that manifest as high blood pressure, it's important to check it regularly, and that doesn't mean you have to go to the doctor every week. You can find home blood pressure meters all over the place -- from Amazon to Costco to the corner grocery store. But which one is best? And what do you need to know if you've already had a stroke? This week, I'm joined by Carol Lucarelli of Omron Healthcare. Omron is a leading manufacturer of home blood pressure meters. In fact, one of their devices is sitting on the table next to me as I type this. It was that very device that gave me the 210 over 160 reading that kicked off my stroke story several years ago. More recently it read 134 over 77 -- not perfect, but still much better than the condition that collapsed my right middle cerebral artery. One reason I wanted to talk with Carol was that I heard about Omron's Going for Zero mission. The other reason is that I like tech and gadgets, especially when they can save lives. IMAGINE A HEALTHIER WORLD We believe the next generation won't be defined by age, but by a world without heart attacks or strokes. This is a world-changing mind-set we call Going for Zero™. We do our part through technology supporting personal fitness, heart health, healthy lungs and freedom from pain. You bring this commitment to life by understanding and sharing heart health with every step. https://omronhealthcare.com/generation-zero/ Carol joins us to talk about how these devices work, how they compare to the doctor's office, and why we should trust devices from Omron from wrist devices to upper arm cuffs to smart watches. If you don't see the audio player below, click here to listen to the conversation on the original site.   Click here for an AI-generated transcript Who is Carol Lucarelli? Carol Lucarelli is the Executive Director of Marketing and Ecommerce at OMRON Healthcare, the global leader in personal heart health and wellness technology. Lucarelli is a seasoned marketing professional with over 25 years of experience in the consumer packaged goods space. During her time at OMRON, Lucarelli has led the marketing initiatives for numerous product innovations, including the launches of HeartGuide Complete as well as VitalSight, OMRON's first remote patient monitoring service. Wrist vs Arm Home blood pressure monitors typically come in two types -- wrist or upper arm. The wrist mounted devices are typically smaller. You simply put it on your wrist, secure it, press a button, and raise your hand to get it at the appropriate level. The upper arm models will typically wrap around your bicep or upper arm. Some will have the guts of the device on the cuff; others will have a hose that goes to a device on your desk, table, or lap. In the past, I assumed the upper arm would be the more reliable device because that's what many medical facilities use. Over the past few years, though, I've seen more medical teams using the wrist versions for convenience. Carol also explained that whether it's wrist mounted or upper arm mounted, the devices are held to the exact same standard of accuracy. As long as a device is on the Validated Device List, you can assume the model is accurate. Ask your doctor if they have a recommendation. There are all sorts of health reasons why one style might work better for someone than another style. Different deficits after stroke may impact the choice. While cognitive, language, sensory, and pain challenges can all have an impact, hemiparesis - or limb paralysis - is probably the bigger factor. Once you choose your device, it's also a good idea to bring it with you the next time you go to the doctor. This way your doctor can double-check its accuracy against their own blood pressure equipment. While the Validated Device list ensures your model is generally accurate, this process ensures your particular meter is accurate. Hemiparesis recommendations Typically, we take blood pressure measurements on the left arm. It's closer to the heart and will provide a more accurate reading for non-stroke folks. After stroke, a stroke affected limb, however, doesn't have the same muscle activity of a non-affected limb. And that muscle activity affects blood pressure readings. That limb may also experience more edema or swelling due to less effective circulation, lymphatic draining, and other things. That can also impact the blood pressure readings. So, to correctly read blood pressure, you should take a reading on the unaffected side. A difference of 10 points between the sides is not uncommon. The other issue that impacts readings is arm position. The cuff where the reading takes place should be level with the heart. With an upper arm cuff, that's easy. With a wrist mounted device, it's more challenging. You have to be able to lift the wrist to the same height as the heart. Your arm is also supposed to be relaxed when you take the reading so it should be on a bed, table, shelf, or some other item to hold it at heart level. To get an accurate reading, the arm should not be held up under its own power. If you have a care partner who can fasten the device, great. Then an upper arm device can be easy to use. You don't need to worry about arm height because it's naturally at heart level. If the main unit connects via hose to the cuff, you can even use the unaffected hand to push the ON button. If you're by yourself, the problem is fastening the cuff in the first place. It took me several years after stroke until my left arm had enough strength and dexterity to tighten the cuff on my upper arm. Sometimes I still don't get it right and have to try again. Fighting with that costs energy and aggravation, which raises my blood pressure so now I have to take extra time to make sure I relax adequately to get an accurate reading. Once the cuff is set and I chill out a bit, I can get a good reading. A wrist cuff is easier to put on. It still requires a certain amount of dexterity and strength in my affected hand, but it's much less. And it's easier to reach the strap with my teeth, so I can use my bite to help tighten the straps. Then the trick is to get it at heart level. Sitting up can be tough because I have to use my affected side to lift my unaffected arm so I'm not messing with the reading by using the strength in the arm with the monitor. One solution to that which works with both types is to take readings in my recliner our lounge chair. I can get strapped in and then lay back with my arms in neutral positions and the device naturally at heart level, relative to the ground. So, putting the device on is likely easier with a wrist device. Getting an accurate reading is likely easier with an upper arm device. Of course, that all assumes I'm doing this by myself. If someone is able to consistently help, it changes that calculation a bit. Consider your goals, your deficits, and your doctors' recommendations. Try some different devices to find the one that you will use most consistently to generate the most accurate readings. Though the Omron Heart Guide wrist monitor / smart watch does activate my technolust… Getting Good Data Carol gave four recommendations for getting an accurate reading. First, sit upright in a hard-back chair. No slouching. This will give you a good base to start from, assuming your deficits allow you to do this. Second, be seated for 5-10 minutes before taking your reading. If you've been moving around from place to place or doing your sit-to-stand exercises for the day, your blood pressure will likely be elevated from that activity. Third, keep the cuff at heart level.  If it's an upper arm cuff, that's easy. If it's a wrist cuff, you may need to support the arm that's wearing the device. Fourth, keep your feet flat on the ground, assuming tone and spasticity allow that. Crossing your legs or ankles will restrict the flow of blood and reduce the accuracy of your readings. These tips will help you get readings, but more important than your exact posture is taking your readings in the same (or similar) posture each time to ensure consistency. Often the trends over time are more important than any particular reading. Validated Device List Whichever style of meter you choose, you want it to be accurate. And a good place to start is the Validated Device List. The Validated Device list is maintained by the American Medical Association. The devices on it have been evaluated by a third party to ensure they meet the standards for accuracy that doctors can trust. While Omron has a bunch of devices on this list, it includes plenty of other manufacturers, too. All of these devices will meet the minimum standards for accuracy. Consistency We end up talking about consistency a lot on this show. Carol talks about the importance of taking blood pressure readings consistently. The actual result often matters less than the trends over time. And the only way to spot trends over time is to consistently collect that data, like brushing your teeth. Consistency isn't just about blood pressure. Consistently executing a PT, OT, or SLP home exercise program is one of the keys to recovery. We talk about the thousands of reps needed for neuroplasticity over time, but it's the consistency that will make that happen. Doing 100 reps a day, every day will yield better results than doing 1,000 reps once a week. The core call to action for every episode of the show is, "Don't get best…get better." You don't have to become the best at anything to be successful; it's likely to be a fool's errand. Instead, just try to get a little better every day. Consistent work to improve just a tiny bit can add up to huge gains over time. What consistency lacks in flash and drama, it makes up for in long-term results. Hack of the Week Carol shared a couple tips and I have one of my own this week. First, use electronic reminders around the house. That could include smart phone alarms. Or it could be devices like the Amazon Alexa or the Google Home devices. Set those devices to remind you to check your blood pressure, take your medication, do your exercises, or whatever. Your brain is doing enough in recovery. If you can outsource some routine stuff to robots, go for it. When there are things about your devices that you don't like, let the manufacturer know. When enough people make suggestions or point out problems, then they may realize changes need to be made. If they don't hear from customers, or customers whose business they lost, it's a lot harder to make the most appropriate changes to the products. And, while I could be wrong (and hope I am) I don't think most medical device companies have folks with hemiparesis working in their engineering departments. Finally, my biggest struggle with an upper arm blood pressure cuff is tightening it adequately with my affected hand. My strength and dexterity are improving, but I still have a long way to go. One trick I have is to tighten it around my elbow and lower arm. I still can't tighten it all the way; it will be loose there. Once I have that secure though, I can slide it up to my upper arm (with effort). While it was loose on my lower arm, because my upper arm is bigger, it is now tight enough to get a reading without the machine throwing an error message. Links Where do we go from here? If you don't already have one, get a home blood pressure monitor from the Validated Device list and check your blood pressure consistently. The magic numbers you are looking for are 120/80. Share this episode and article with someone you know by giving the, the link http://Strokecast.com/Omron Subscribe to the Strokecast newsletter at http://Strokecast.com/News Don't get best…get better. More thoughts from Carol Lucarelli    

Renner's best friend and co-star discusses Rennervations, a new show from Disney+. Renner and a cast of celebrity friends convert massive surplus vehicles into purpose built creations for charities and nonprofits. The creations include a mobile music bus, a mobile water treatment plant, a dance studio, and a mobile rec center. This unique and heart-warming production is a mashup of Monster Truck Garage and a Ted Talk. Premiers Wednesday, April 12, exclusively on Disney+.Today's episode of Innovation Tech Talks is Brought to you by OMRON | A World Leader in Technology To learn about all the amazing things OMRON does, visit: https://omronhealthcare.com

O'Dowd and Dennis paly Dusty and Cass, whose 20-year marriage has settled into a comfortable routine before their bucolic, small-town lives are thrown into turmoil with the arrival of the mysterious Morpho Machine at the town's general store. The show debuts on Apple TV+ on Wednesday, March, 29th with the first three episodes.Today's episode of Innovation Tech Talks is Brought to you by OMRON | A World Leader in Technology To learn about all the amazing things OMRON does, visit: https://omronhealthcare.com

Read adapted The Big Door Prize from M.O. Walsh's novel and serves as it's showrunner and executive producer. The show debuts on Apple TV+ on Wednesday, March, 29th with the first three episodes. Set in Small Town USA, the show tells the story of the unexplained appearance of the mysterious Morpho Machine at the local general store. What ensues is a mix of comedy, sci-fi and drama unlike any TV series in memory.Today's episode of Innovation Tech Talks is Brought to you by OMRON | A World Leader in Technology To learn about all the amazing things OMRON does, visit: https://omronhealthcare.com

One of our favorite themes on Raise the Line is how technology can help people become better informed about their own health, allowing them to participate more actively in maintaining and improving it. Well, today, we're going to take a deeper look at that issue with the help of Carol Lucarelli, Executive Director of Marketing and E-Commerce at Omron Healthcare, the global leader in remote blood pressure monitoring and personal health technology. “We want individuals to take responsibility for understanding what ails them and be part of the care plan to get better.” The medical devices Omron makes can help do that by providing patients and their providers with timely data from remote monitors of various types.  One of the most common is blood pressure monitors, which Lucarelli says could go a long way in preventing strokes and heart attacks if used diligently.  And it stands to reason that if providers are on top of changes in key health measurements taken at home, they can catch problems early lessening the need for trips to the doctor's office or emergency room. Join host Michael Carrese for an informative look at the current role of remote monitoring, what's coming down the road and how medical devices can help facilitate a dialogue between providers and patients. Mentioned in this episode: https://omronhealthcare.com/

In this episode of the Raw and Real Entrepreneurship podcast with Susan Sly, hear from Andi Huels, Global Head of Growth and Strategy for RadiusAI. Andi is passionate about evangelizing AI solutions, and she shares her expertise in AI, machine learning, and data analytics to help F500 companies drive agility and re-invent their operations. Join us as Andi talks about her journey to success, the advantages of AI, and how it can help retailers and customers. Plus, hear about Andi's mission to make AI easy to implement. Don't miss this fascinating discussion about the power of AI!   About Andi: Andi Huels has successfully revolutionized the field of artificial intelligence, going above and beyond to motivate others and be a knowledgeable resource and passionate leader in the field. In her role at RadiusAI, she shares her expertise in AI, machine learning, and data analytics to help F500 companies drive agility and re-invent their operations. Prior to RadiusAI, Andi served as Head of AI, North America, at Lenovo ($70B). Her background includes over two decades of global strategy, growth, and innovation leadership roles with General Electric, ExxonMobil, Dematic, Crane, Imerys, Omron, and General Mills.    Connect With Andi: LinkedIn https://www.linkedin.com/in/andreahuelsai/ Twitter @RadiusAI   About The Host:  Susan Sly is the Co-founder and Co-CEO of RadiusAI, a tech investor, best-selling author, keynote speaker, entrepreneur, and host of the highly acclaimed podcast – Raw and Real Entrepreneurship. Susan has appeared on CNN, CNBC, Fox, Lifetime Television, The CBN, The Morning Show in Australia and been quoted in MarketWatch, Yahoo Finance, Forbes, and more. She holds Certificates in Management and Leadership, Technology and Operations, and Strategy and Innovation from MIT. Susan is the author of 7 books. Her book project with NY Times Best Selling Author, Jack Canfield, made six Amazon Best Selling lists. Connect With Susan: Website https://susansly.com/ Twitter https://twitter.com/Susanslylive Twitter https://twitter.com/rawandrealentr1 LinkedIn https://www.linkedin.com/in/susansly Facebook https://www.facebook.com/susanslylive

VitalSight is a new tool for remote patient monitoring (RPM) from OMRON, a company that offers a wide range of health devices for blood pressure, respiratory problems, and more. Brandon Haag, OMRON's Director of Operations and Business Development, describes in this short video the operation of VitalSight and how it helps both the patient and their doctor treat hypertension. OMRON is working on adding more sources of data and medical conditions to this program. Learn more about VitalSight by OMRON: https://omronhealthcare.com/vitalsight/ Find more great health IT content: https://www.healthcareittoday.com/

On this week's Roundabout Roundup, Nicole's fortifying her home with a heavy-duty door security bar from Brinks. Terri is keeping tabs on her health with her very own home blood pressure monitor, and Catherine's soothing them both with a pretty tune from singer-songwriter Claire Kelly called "The Land that Time Forgot."Thanks as always to Jon Morin for our fun in-and-out music, which you hear on every episode.

Dave talks to Ranndy Kellogg, CEO and President of OMRON Healthcare about their personal heart health products.

With the recent launch of ChatGPT 3.5 by research and deployment company OpenAI, questions are being asked and debates are being sparked by everyone from engineers to writers to doomsday prophesiers.To get to the bottom of what ChatGPT really is and what it means for the future of business, managing editor Aron Vaughan spoke with Dr. Richard Ford, CTO of cybersecurity firm Praetorian.Today's episode of Innovation Tech Talks is Brought to you by OMRON | A World Leader in Technology To learn about all the amazing things OMRON does, visit: https://omronhealthcare.com

Guest BioI am a knowledgeable source of factory automation techniques when using machine vision systems, robotics, sensors, and non-contact measurement devices on production lines. My work has used the most influential brands of intelligent cameras, such as Cognex, Keyence, Banner, Omron, Matrox, Dalsa, and more. Most recently, my experience with the Elementary ML platform has shown me what machine learning vision systems can offer, and I am on a path to learning much about the next wave of AI-backed vision systems. My experience reflects 22+ years of hands-on use of machine vision equipment placed directly into production environments.How are people typically using Vision Systems?How can we use them better?Join us as Greg McEntyre is giving us a deep dive into all things Vision Systems.Have questions about or comments on vision systems?Manufacturing Hub Episode 84. Recommended Materials Lord of the Rings Purple Cow Connect with Us Greg McEntyre Vlad Romanov Dave Griffith Manufacturing Hub Let Us Know What You ThinkIf you enjoyed the show, it would mean the world to us if you could leave us a review: https://podcasts.apple.com/us/podcast/manufacturing-hub/id1546805573#manufactuing #automation #digitaltransformation #machinevision

Endüstri Zirveleri programına Betül Karasinan konuk oldu.

Endüstri Zirveleri programına Betül Karasinan konuk oldu.

Fast paced development of electronics technology over the last decade has enable wireless sensors to go from being unproven but innovative solutions for monitoring complex engineering projects to become the go-to option for many schemes. The benefits for project delivery and reduced risk that this evolution in sensor technology is explored in this episode, which is sponsored by Farnell Electronics. NCE editor Claire Smith is joined by Bryn Smith, who is chief technical officer with wireless condition monitoring systems and technology firm Senceive, to discuss the change and look ahead to what technology advancements are expected in the future. Bryn starts by using one of Senceive's first projects, which involved work on Bond Steet tube station for Costain and Laing O'Rourke, to demonstrate how the technology has changed in the last 10 years. He explains how the limitations of the solutions used on that scheme have been overcome and the benefits the technology can now deliver on current projects. While advances in electronics has enabled more rapid reporting and longer battery life to improve the quality of the data collected, Bryn said that there are still misconceptions about sensor technology. As NCE marks it's 50th anniversary this year, Claire asks Bryn to make some predictions about what sensor technology will look like in another 50 years from now. Listen to the podcast to find out what he thinks is in store for the industry and the opportunities this will present to major project delivery in 2072. This episode is sponsored by Farnell. Farnell is a global electronics and industrial solution provider, part of the Avnet group. We deliver products, services, and solutions to thousands of customers around the world who focus on electronic system design, manufacturing, industrial environments, as well as across maintenance and repair sectors. We offer a portfolio of close to 1 million products from thousands of world-leading supplier brands. Engineers come to us at any and every stage of their process, as we are well equipped to offer support with the products they need as well as adding value. Farnell carry a vast product portfolio of around 80,000 industrial products to support customers in their Industrial Automation journey – all available for fast delivery. We are well placed to offer support across multiple leading supplier brands such as Omega, Schneider, Eaton, ABB, Omron, Siemens, Festo, Mitsubishi, and Phoenix Contact. Our Industrial Automation & Control Hub provides access to a wide range of technical resources to facilitate factory floor design and upgrade of existing systems. Find out more at uk.farnell.com

Growing use of 3D printing for concrete structures, metal bridges and composite forms by the construction industry is discussed in this episode, which is sponsored by Farnell Electronics. NCE editor Claire Smith and senior reporter Catherine Kennedy are joined by Bam Nuttall head of innovation Colin Evison to chart how 3D printing first started to influence the civil engineering sector, where the industry is now and what opportunities lie ahead. Colin shares his experience of working with 3D printed concrete structures on projects with clients like the Environment Agency and talks about the opportunity it presents for engineers to tap into their creative side as they work outside of existing design codes. Claire and Catherine discuss the construction risks that come with using innovative technology with Colin, along with the potential 3D printing offers to reaching carbon net zero. Colin also shares some lessons learned around where 3D printing techniques work best and some considerations when planning to use such methods. While Colin doesn't believe 3D printing will solve every construction problem, he does expect its used to grow in the next decade. This episode is sponsored by Farnell. Farnell is a global electronics and industrial solution provider, part of the Avnet group. We deliver products, services, and solutions to thousands of customers around the world who focus on electronic system design, manufacturing, industrial environments, as well as across maintenance and repair sectors. We offer a portfolio of close to 1 million products from thousands of world-leading supplier brands. Engineers come to us at any and every stage of their process, as we are well equipped to offer support with the products they need as well as adding value. Farnell carry a vast product portfolio of around 80,000 industrial products to support customers in their Industrial Automation journey – all available for fast delivery. We are well placed to offer support across multiple leading supplier brands such as Omega, Schneider, Eaton, ABB, Omron, Siemens, Festo, Mitsubishi, and Phoenix Contact. Our Industrial Automation & Control Hub provides access to a wide range of technical resources to facilitate factory floor design and upgrade of existing systems. Find out more at uk.farnell.com

The role of Internet of Things to empower fully intelligent infrastructure comes under the spotlight with a look at what it means for the future of civil engineering in this episode, which is sponsored by Farnell Electronics. NCE editor Claire Smith is joined by Arup associate director Rory McCully to look back at the evolution embedded sensor technology has brought to infrastructure over the last 25 years and consider what the next 25 years might bring. Claire starts off with some predictions that were made at NCE's 25th anniversary in 1997 where it was anticipated by 2022 that there would be self-monitoring, self-policing bridges. These were expected to have their own repair robots and be able to forecast when they had reached their design life. Rory and Claire conclude that the industry hasn't quite reached that point yet and that it is still some way off but look at what has been achieved and consider the benefits that Internet of Things and intelligent infrastructure could bring in the future. Rory also outlines some of the barriers that the industry faces in terms of reaching these benefits, as well as the need for such technology to look at systems rather than infrastructure on a structure by structure level to gain the maximum advantages.   This episode is sponsored by Farnell. Farnell is a global electronics and industrial solution provider, part of the Avnet group. We deliver products, services, and solutions to thousands of customers around the world who focus on electronic system design, manufacturing, industrial environments, as well as across maintenance and repair sectors. We offer a portfolio of close to 1 million products from thousands of world-leading supplier brands. Engineers come to us at any and every stage of their process, as we are well equipped to offer support with the products they need as well as adding value.   Farnell carry a vast product portfolio of around 80,000 industrial products to support customers in their Industrial Automation journey – all available for fast delivery. We are well placed to offer support across multiple leading supplier brands such as Omega, Schneider, Eaton, ABB, Omron, Siemens, Festo, Mitsubishi, and Phoenix Contact. Our Industrial Automation & Control Hub provides access to a wide range of technical resources to facilitate factory floor design and upgrade of existing systems.   Find out more at uk.farnell.com

About Michael Zipursky: Michael Zipursky is the CEO of Consulting Success®. He's advised organizations like Financial Times, Dow Jones, RBC, Omron, Sumitomo and helped Panasonic launch new products into global markets, but more importantly, he's helped over 500 consultants from around the world in over 75 industries add six and seven figures to their annual revenues. He is one of the world's top authorities on growing a consulting business. His work has been featured in Forbes, Entrepreneur, MarketingProfs, Institute of Management Consultants, Fox Business, Chartered Management Institute, Duct Tape Marketing, and Conscious Millionaire. He is the author of 5 books on consulting and business growth, his most recent the Amazon Bestseller The Elite Consulting Mind.Michael helps consultants attract more clients, increase their fees, win more proposals and grow their business. You may be a great consultant. You know how to provide your clients with value and results. However, if you're like most of the consultants we've worked with over the last 10 years your challenge is getting more clients. And most importantly, how can you attract clients on a predictable and consistent basis?If you're interested in learning how to develop a marketing system to consistently attract your ideal clients, increase your fees and position yourself in your market as a true authority get in touch and visit: https://www.consultingsuccess.com/coaching-for-consultants In this episode, Nancy and Michael discuss: Creating a meaningful business Attracting your ideal clients Giving value to ideal clients Telling your story  Key Takeaways: The best reason to go into business is the potential for it to provide you more freedom to do the things that are meaningful to you - like spending more time with your family, or pursuing a passion or advocacy of yours. Know your ideal client and understand them. Develop a magnetic message that will resonate with your ideal client that they'd want to learn more about you. Take all of your years of experience, skill sets, and expertise and package it in a way that your ideal clients would want to buy what you offer.Good marketing is all about getting in front of your ideal client consistently with a message that they want to hear, providing valuable insights, information, and ideas to clients. They won't only know you exist, they would be excited to hear from you. People don't just want to buy a product, they want to know your story; the real story of the people behind your company. Tell your story, because if you don't either clients will not be able to align with you or they'll make their own story about you.  “That's meaningful success - it's not just about the accumulation of things or money, it's really about being able to live a life that you desire and dream of on your own terms.” - Michael Zipursky Connect with Michael Zipursky: Twitter: https://twitter.com/MichaelZipursky Website: https://www.consultingsuccess.com/ LinkedIn: https://www.linkedin.com/in/zipursky/ Try Our Proven, 3-Step System, Guaranteeing Accountability and Transparency that Drives RESULTS by clicking on this link: https://oneofakindsales.com/call-center-in-a-box/ Click on this link to download a FREE digital copy of The Inside Sales Solution: https://form.jotform.com/212374882793164 Connect with Nancy Calabrese:  Twitter: https://twitter.com/oneofakindsales Facebook: https://www.facebook.com/One-Of-A-Kind-Sales-304978633264832/ Website: https://oneofakindsales.com Phone: 908-879-2911  LinkedIn: https://www.linkedin.com/in/ncalabrese/ Email: leads@oneofakindsales.com

Techstination interview: Omron Healthcare VitalSight for connected digital health

This week we take a look at the latest product announcements from Amazon. There are a slew of smart home products and a new FireTV that's actually TV! Then there is the Value Electronics TV Shootout where they pick the best TV in three categories. As usual we look at the week's news and read your emails.  Amazon Product Announcements Amazon announced a bunch of new products this week. Here are a few that caught our attention: Amazon Smart Thermostat ($60 November 4th) - Amazon Smart Thermostat is ENERGY STAR® certified. Certified thermostats are required to save an average of $50 on yearly energy bills. Alexa does the programming for you, automatically adjusting the temperature to suit your preferences. The thermostat can even be set to your preferred temperature if Alexa has a hunch you're home, away, or asleep. Echo Show 15 ($250 coming soon)- Reimagine how your family stays organized and entertained with a personalized smart display that helps keep everyone on track and in sync. You can mount it on a wall or display it with a compatible stand (sold separately) in portrait or landscape orientation.  Leave each other sticky notes, update shopping and to-do lists, and see your shared and individual calendars. Family members can create profiles and use visual ID and voice ID so Alexa can recognize who's who and show the right information to the right person—like appointments, reminders, recently played music, and more.  Catch up on the news, watch shows and movies, cook along with demo videos, and more. Enjoy Amazon Music with lyrics you can see on the screen, plus podcasts, radio stations, and audiobooks. For a multi-room music experience, you can connect to other compatible Echo devices. Amazon Glow, Interactive Projector + Video Calling ($250 request invitation to buy) -  The Amazon Glow is a new interactive projector and video-calling device designed to build rich family connections by transforming the way children bond with remote loved ones. A new way to connect - Glow uniquely fuses projection, video, and sensing technologies to create a virtual experience that feels like being together in-person, no matter how far away you are. Halo View fitness tracker ($80 coming soon) - Essentially a FitBit for $80 Ring Alarm Pro, 8-piece - built-in eero Wi-Fi 6 router and optional 24/7 monitoring ($299 November 3rd) - This kit includes one Alarm Pro Base Station, one Keypad, four Contact Sensors, one Motion Detector, and one Alarm Range Extender. Built-in eero Wi-Fi 6 router creates a secure network for our strongest protection yet. Arm and disarm Ring Alarm with your voice and get mobile alerts about the sound of broken glass or smoke alarms with Alexa Guard. Call trained agents from your Echo who can request the dispatch of emergency responders with Alexa Guard Plus, included with an eligible Ring Protect Plan ($100 a year) Ring Always Home Cam | Flying indoor cam ($250 request invitation to buy) - The Ring Always Home Cam is a first-of-its-kind flying indoor security camera for your home that flies along custom flight paths so you can see what's happening around your home no matter where you are. See what's going on in 1440x1440 HD video, with a built-in LED that automatically lights up the path when recording at night or in dim environments. Left a window open or the stove on? Create flight paths ahead of time so you can manually check in with the Ring App from anywhere. If your Ring Alarm contact sensors or motion detectors are triggered, Always Home Cam will automatically fly to see what's happening. Always Home Cam's camera never records when the device is docked and only records during trained flight paths. Amazon Astro, Household Robot for Home Monitoring ($1000 equest invitation to buy) - Meet Astro, the household robot for home monitoring, with Alexa. Amazon Astro uses advanced navigation technology to find its way around your home and go where you need it. When you're not using Astro, it will hang out close by at the ready. Remotely send Astro to check on specific rooms, people, or things. Plus, get alerts if Astro detects an unrecognized person or certain sounds when you're away. Activate your 6-month free trial of Ring Protect Pro subscription and have Astro proactively patrol, investigate activity, save videos in Ring's cloud storage for up to 60 days, and more. Astro comes with a detachable cup holder and can carry other items (sold separately) like a Ziploc container, the OMRON blood pressure monitor, and a Furbo Dog Camera that tosses treats to your pet. Amazon Fire TV 65" Omni Series 4K UHD smart TV with Dolby Vision (55” $560, 65” $830, 75” $1100 October 27) - Get true-to-life picture quality and rich, brilliant colors with support for 4K Ultra HD, Dolby Vision, HDR 10, HLG, and Dolby Digital Plus, and control the TV hands-free with Alexa. Dolby Vision brings spectacular color, contrast, clarity, and brightness to your screen. With built-in microphones, just ask to turn on the TV, and find, launch, and control content, no remote needed. HDMI eARC lets you add audio equipment for enhanced sound. Judges at the Value Electronics TV Shootout declare 3 winners On Sunday and Monday, September 12 and 13, 2021, Scarsdale, NY retailer Value Electronics brought together calibrators, cinematographers, and other video professionals to evaluate flagship TVs and—for the first time, ultra short-throw (UST) projectors—to determine which model was the best of the best. I discussed the annual event in detail last week, including how the evaluations were carefully set up and provided links to the live stream of each day. Full article here…

On Episode 120 of Health in 2 Point 00, Jess asks Matthew about Particle Health raising $12 million in an A round to facilitate health data sharing, AliveCor and OMRON partnering in a remote monitoring play for combined EKG and blood pressure monitoring, and Compass Pathways scoring $80 million in a B round for psilocybin therapy for treatment-resistant depression. Optum is reportedly acquiring AbleTo for $470 million which provides behavioral telehealth — looks like they're slowly putting all the pieces together to become a big virtual Kaiser.

Michael Zipursky is the CEO of Consulting Success® and Coach to Consultants. He has advised organizations like Financial Times, Dow Jones, RBC, Omron, Sumitomo and helped Panasonic launch new products into global markets, but more importantly, he's helped over 300 consultants from around the world in over 50 industries add six and seven figures to their annual revenues. Over 34,000 consultants read his weekly consulting newsletter. Michael is also the author of the Amazon Best Sellers "The Elite Consulting Mind" and Consulting Success®, the book.   Michael and David talk about what it takes to run a successful consulting business and go into detail on how he handles some of the aspects involving that. From seeking clients to delegating and scaling, avoiding perfectionism and more!

The great Mick Jagger famously mused, "I can't get no satisfaction." If your customers are feeling the same way, you might be in trouble. Today's guest says "You CAN Always Get What You Want" if you make sure your customers get what they need.  Blake Morgan is the author of More is More: How The Best Companies Work Harder And Go Farther To Create Knock Your Socks Off Customer Experiences. And what she specializes in, is making sure companies give the best customer experience every single time. Blake divulges some high-level secrets that bigger companies use to create great customer experiences on any interface. The steps behind Blake's "Do More" method will have your business making sure that your customers remain loyal.  This episode is brought to you by, The Why and The Buy, hosted by Jeff Bajorek and Christie Walters. They interview entrepreneurs and sales experts to find out the why behind their success. Listen on Apple Podcasts or wherever you get your podcasts. On today's show... 03:08 - A diehard asks Jen how to become a better businesswoman. 11:03 - Who does Blake consider to be the "modern customer" 18:29 - How to win customers over despite a bad review  25:38 - Where does Blake see the future of customer service heading? 28:55 - Blake reveals the "Do More" method to customer experience 35:12 - How does customer experience help when it comes to B2B sales? 39:45 - Where do Jeffrey and Jennifer see the future of customer service going? More on today's guest Blake Morgan is a leader in customer experience. She is a keynote speaker and customer experience futurist currently working on her second book with HarperCollins on customer experience. Her first book is “More is More: How The Best Companies Work Harder And Go Farther To Create Knock Your Socks Off Customer Experiences.” She has worked with Accor Hotels, Accenture, Adobe, Parker Hannifin, Ericsson, Verizon, Omron and more. Blake is a guest lecturer at Columbia University as well as adjunct faculty at the Rutgers executive education MBA program.   FREE E-BOOK: WHY PEOPLE BUY Figuring out why people buy, is a thousand times more powerful than knowing how to sell. This eBook will give you the insight that will allow you to uncover the genuine buying motive of your customer, every time.   Join our Exclusive Sell or Die Facebook Group, where our members are already discussing the latest episode. Submit your sales question and we will answer it on the show!   Need more sales help? Jeffrey's website: https://gitomer.com Jennifer's website: https://salesinanyminute.com Subscribe to the Gitomer Learning Academy: https://go.gitomer.com/gitomer-learning-academy

The #1 way to increase sales from fitness consultations, or bookings (if you do them) has nothing to do with your degree, certification, experience, or the type of body fat analyzer that you use. Whether you spent $10,000 on an Inbody or $60 on an Omron or something else, has nothing to do with the buyer's perception of you during your session. And that is all that matters. What does make a difference in your sales from fitness consultations?  Your attire can increase sales from fitness consultations or make it harder to sell. Your competence can increase sales from fitness consultations. Your customer perceives your competence from your name tag (does it say "intern"?), the proficiency of putting on the blood pressure cuff, and informing them what's going to happen next. Are your hands shaking? Are you sweating or hesitating? Are you distracted? Do you seem to be trying to remember what comes next? It all matters. Too tight of clothing and too baggy clothing both hurt your ability to increase sales from fitness consultations. Buyers, primarily women, were asked about their perceptions. They perceived both revealing, tight clothing and layers of baggy clothes as a clue the trainer was less competent, unprofessional, and less successful.  We all want to work with someone more successful.  Eye contact, rate of speech, and warmth with a customer matter. A weak handshake could reduce your ability to sell while a strong voice and handshake or touch at just the right time can increase sales from fitness consultations.  Not doing fitness consultations? Your first meeting is your first impression no matter when or how that happens. A fitness consultation in itself is a sign of confidence. No one is wearing blinders today. We all are aware that free service is usually followed by an offer to take the next step. Few of us want to do a free consultation unless we're confident in our ability to help a customer, to interpret how we can help them, and ask for the sale. Increase sales from fitness consultations by practicing now. If you're listening at the end of the year when it was recorded, nail this before the start of the New Year! for a complimentary consult about the language and process you use (and a potential offer to take the next step, wink, wink) contact http://www.fitnessmarketingmastery.com